THE QUALITY CHOICE - Seachoice | Boating and Sea Life Products

L A T E S T A D D I T I O N S A

Item# Wire Range Fits Color Pack Case62301 22-18 #8 stud Red 3 1062311 22-18 #10 stud Red 3 1060141 22-18 #6 stud Red 25 1060151 22-18 #8 stud Red 25 1060161 22-18 #10 stud Red 25 1062321 16-14 #8 stud Blue 3 1062331 16-14 #10 stud Blue 3 1062341 16-14 5/16" stud Blue 3 1062351 16-14 3/8" stud Blue 3 1060091 16-14 #6 stud Blue 25 1060101 16-14 #8 stud Blue 25 1060111 16-14 #10 stud Blue 25 1060121 16-14 1/4" stud Blue 25 1062361 12-10 #8 stud Yellow 3 1062371 12-10 #10 stud Yellow 3 1062381 12-10 5/16" stud Yellow 3 1062391 12-10 3/8" stud Yellow 3 1060031 12-10 #8 stud Yellow 25 106004 12-10 #10 stud Yellow 25 1060051 12-10 1/4" stud Yellow 25 1060061 12-10 5/16" stud Yellow 25 1060071 12-10 3/8" stud Yellow 25 10

Marine grade heat shrinkable ring terminals. 99.9 % pure copper with brazed seam barrel, tin plated. Proprietary nylon/polyolefin 3:1 shrink ratio tubing with adhesive lining provides maximum clarity for wire inspection purposes, faster shrink times and improved abrasion resistance. Simply insert the wire, crimp and heat shrink for a complete environmental seal.

12-10 GA16-14 GA22-18 GA

3-TO-1 HEAT SHRINK RING TERMINALS

Item# Wire Range Pack Case61401 22-18 to 16-14 10 1061411 16-14 to 12-10 10 1061421 12-10 to 8 10 10

Marine grade and designed for connecting different wire gauges. The gauge is marked on each end of the connector and also displays a corresponding color band. 99.9 % pure copper with seamless tube, tin plated. Proprietary nylon/polyolefin 3:1 shrink ratio tubing with adhesive lining provides maximum clarity for wire inspection purposes, faster shrink times and improved abrasion resistance. Simply insert the wire, crimp and heat shrink for a complete environmental seal.

12-10 to 816-14 to 12-10

22-18 to 16-14

STEP DOWN 3-TO-1 HEAT SHRINK BUTT CONNECTORS

Item# Wire Rang Color Pack Case60171 26-22 Green 25 1062251 22-18 Red 3 1060181 22-18 Red 25 1061151 22-18 Red 100 662261 16-14 Blue 3 1060191 16-14 Blue 25 1061161 16-14 Blue 100 662271 12-10 Yellow 3 1060201 12-10 Yellow 25 1061171 12-10 Yellow 100 6Assorted Pack62291 22-18, 16-14, 12-10 Red, Blue, Yellow 10 5

Marine grade heat shrinkable butt splices. 99.9 % pure copper with seamless tube, tin plated. Proprietary nylon/polyolefin 3:1 shrink ratio tubing with adhesive lining provides maximum clarity for wire inspection purposes, faster shrink times and improved abrasion resistance. Simply insert the wire, crimp and heat shrink for a complete environmental seal.

12-10 GA

16-14 GA22-18 GA

26-22 GA

3-TO-1 HEAT SHRINK BUTT CONNECTORS

Item# Wire Range Color Pack Case60601 22-16 Red 100 1060611 16-14 Blue 100 1060621 12-10 Yellow 100 10

Voltage: 600 Max Temp: 75°C / 167°F

12-10 GA16-14 GA22-16 GA

UL®

VINYL INSULATED BUTT CONNECTOR

L A T E S T A D D I T I O N SBB

Item# Wire Range Pack Case60221 #8 AWG 50 1060231 #6 AWG 25 1060241 #4 AWG 25 1060251 #2 AWG 5 10

Marine grade, 99.9% pure copper, with a tin plated brazed seam tube.

BRAZED NON-INSULATED BUTT SPLICE

Item# Cable Size Fastener Pack Case62561 8 1/4" 2 1062551 8 5/16" 2 1062541 8 3/8" 2 1062531 6 1/4" 2 1062521 6 5/16" 2 1062511 6 3/8" 2 1060591 6 3/8" 25 15062501 4 1/4" 2 1062491 4 5/16" 2 1060581 4 5/16" 25 15062481 4 3/8" 2 1060571 4 3/8" 25 15062471 2 5/16" 2 1060561 2 5/16" 25 15062461 2 3/8" 2 1060551 2 3/8" 25 15062451 1 5/16" 2 1062441 1 3/8" 2 1060541 1 3/8" 25 15062431 1/0 5/16" 2 1062421 1/0 3/8" 2 1060531 1/0 3/8" 25 15062411 2/0 5/16" 2 1062401 2/0 3/8" 2 1060521 2/0 3/8" 25 15060511 3/0 3/8" 25 15060501 4/0 3/8" 25 150

Marine grade, 99.9% pure copper, tin plated battery lugs. Seamless pad provides ultimate performance in strength, conductivity and corrosion resistance. UL Listed / CSA Certified. EA: sold in multiples of 25.

6050160591

UL®

TINNED COPPER BATTERY CABLE TERMINALS

Item# Wire Range Fastener Color Pack Case60631 22-16 #10 Red 100 1060641 16-14 #6 Blue 100 1060651 16-14 #8 Blue 100 1060661 16-14 #10 Blue 100 1060671 16-14 1/4" Blue 100 1060681 16-14 5/16" Blue 100 1060691 16-14 3/8" Blue 100 1060701 12-10 #10 Yellow 100 100711 12-10 1/4" Yellow 100 10

60721 12-10 5/16" Yellow 100 1060731 12-10 3/8" Yellow 100 1060741 12-10 1/2" Yellow 100 10


12-10 GA16-14 GA

22-16 GA

UL®

VINYL INSULATED RING TERMINAL

Item# Wire Range Fastener Color Pack Case60801 22-18 #8 Red 6 2060811 22-18 #8 Red 100 1060821 22-18 #10 Red 6 2060831 22-18 #10 Red 25 2060841 16-14 #6 Blue 25 2060851 16-14 #8 Blue 6 2060861 16-14 #8 Blue 100 1060871 16-14 #10 Blue 6 2060881 16-14 #10 Blue 25 2060891 16-14 #10 Blue 100 1060901 16-14 1/4" Blue 5 2060911 16-14 1/4" Blue 100 1060921 16-14 5/16" Blue 5 2060931 16-14 5/16" Blue 100 1060941 16-14 3/8" Blue 5 2060951 16-14 3/8" Blue 100 1060961 12-10 #8 Yellow 5 2060971 12-10 #8 Yellow 100 1060981 12-10 #10 Yellow 5 2060991 12-10 #10 Yellow 100 1061001 12-10 1/4" Yellow 4 2061011 12-10 5/16" Yellow 4 2061021 12-10 5/16" Yellow 100 1061031 12-10 3/8" Yellow 4 2061041 12-10 3/8" Yellow 100 1061051 12-10 1/2" Yellow 3 2061061 8 #10 Red 2 2061071 8 1/4" Red 2 2061081 8 5/16" Red 2 2061091 8 3/8" Red 2 2061101 8 1/2" Red 1 2061111 6 1/4" Blue 1 2061121 6 3/8" Blue 1 2061131 4 1/4" Yellow 1 20


12-10 GA16-14 GA22-18 GA

UL®

NYLON INSULATED RING TERMINAL

Item# Wire Range Pack Case61571 22-18 25 1061581 16-14 25 1061591 12-10 25 10

Marine grade, 99.9% pure copper. Tin plated for corrosion resistance.

SEAMLESS BUTT SPLICE

L A T E S T A D D I T I O N S CC

Item# Size Color Case60441 3/16" x 48" Black 56045 1/4" x 48" Black 562611 3/8" x 48" Black 560461 1/2" x 48" Black 560471 3/4" x 48" Black 560481 1" x 48" Black 560341 3/16" x 48" Red 560351 1/4" x 48" Red 562601 3/8" x 48" Red 560361 1/2" x 48" Red 560371 3/4" x 48" Red 560331 1" x 48" Red 561501 3/16" x 48" Yellow 561511 1/4" x 48" Yellow 561521 1/2" x 48" Yellow 561531 3/4" x 48" Yellow 561541 1" x 48" Yellow 5

Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.

3-TO-1 HEAT SHRINK TUBING WITH SEALANT - 48"

Yellow

RedBlack

Item# Size Color Pack Case62031 1/8" x 3" Black 3 1062041 3/16" x 3" Black 3 1062051 1/4" x 3" Black 3 1062061 3/8" x 3" Black 3 562071 1/2" x 3" Black 3 562211 3/4" x 3" Black 3 5Assorted Packs62201 1/8", 3/16", 1/4",

3/8", 1/2" x 3")

Black 5 5

62191 3/8" x 3" (1) Blk, Red &Wht. (2) Yellow 5 562221 3/4" x 3" (1) Blk, Red, Wht & Yellow 4 5

Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent

corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.

62201: Pack of assorted Sizes62191 & 62221: Pack of assorted Colors

3-TO-1 HEAT SHRINK TUBING WITH SEALANT - 3"

Item# Size Color Max Load Pack CaseStandard14131 4" UV Black 18 lbs. 100 1214141 6" UV Black 50 lbs. 100 1214101 8" UV Black 50 lbs. 25 1214111 8" UV Black 50 lbs. 100 1214121 8" UV Black 50 lbs. 1000 121415 11" UV Black 50 lbs. 100 1214191 14" UV Black 50 lbs. 100 1214211 14" UV Black 120 lbs. 100 12Mounting14161 8" UV Black 50 lbs. 25 1214171 8" UV Black 50 lbs. 100 1214181 8" UV Black 50 lbs. 1000 12

14161, 14171 & 14181: Accommodates # 8 screw

CABLE TIES

MountingStandard

Item# Color Size Case6147 Black 1" x 10' 1061481 Red 1" x 10' 1061491 Yellow 1" x 10' 10

Ideal for almost any application requiring a water-proof seal.

YellowRedBlack

SILICONE SELF-FUSING TAPE

Item# Case61211 1

Features Include:

MULTI-PURPOSE CRIMP TOOL

Item# Case61221 1

RATCHETING CRIMP TOOL

Features Include:®

L A T E S T A D D I T I O N SDD

Item# Case61251 1

HEAVY DUTY CRIMPING TOOL

Features Include:

Item# Size Color Case

61231 7 1/2" Blue (Handle) 1

The high output flameless heat gun designed for industrial applications where versatility and power are a must. The flameless tool is safe to

use in environments where vapors may be present or flames are prohibited. Included deflector attachment evenly distributes heat making heat shrink tubing installation faster. Leave the extension cords behind with this portable ergonomic heat tool. Features Include:

hands-free option

ULTRA SHRINK JET - FLAMELESS BUTANE HEAT TOOL

Item# Case61241 1

PROFESSIONAL HAMMER CRIMP TOOL

A convenient and durable tool for crimping lugs and terminals from 6 - 4/0 GA. Made of high strength steel, the hammer crimp tool features a V-shaped nest for a solid crimp each time with a simple swing of a hammer. The Terminal & Lug Size Guide lets you know the crimp is complete.

Item# Case61281 1

7-in-1 WIRE STRIPPER AND CUTTING TOOL

Features Include:

Item# Case61261 1

ROTARY CABLE STRIPPING TOOL

Features Include:

TURBO LITE II MINI TORCH

Provides a 2400°F pinpoint blue flame that easily handles applications such as heat shrink terminals and heat shrink tubing. Features Include:

problem

Item# Size Color Case

61201 2.8" H x 0.8" W Charcoal 1

Item# Size Color

61271 3.9" L x 1.4" W x 5.4" H Black

PROFESSIONAL HEAVY DUTY BUTANE POWER TORCH

This durable tool provides a dependable and powerful heat source for almost any application where a controlled flame is required. No shop should be without it. Features Include:

and flame precision to fit your application

position

L A T E S T A D D I T I O N S E

Item# Length Case97301 35" to 64" 12

TELESCOPING BOAT COVER SUPPORT POLE WITH BASE

Mushroom TopSnap-On Fastener Top

1" Anodized aluminum construction. Supplied with mushroom top, snap-on fastener top and rubber cap.

Item# Case60001 1

18 Compartment box: 10 3/4" W x 1 11/16" H x 6 3/4" D.

Qty.101051010101055510105555

Item #60181601916020160151601616010160111600416005160071602716029160311602816030160321

DescriptionButt Conn.Butt Conn.Butt Conn.Ring Term.Ring Term.Ring Term.Ring Term.Ring Term.Ring Term.Ring Term.Insul. Disc.Insul. Disc.Insul. Disc.Insul. Disc.Insul. Disc.Insul. Disc.

Specs22-18, RD16-14, BL12-10, YL22-18, RD, #8 stud22-18, RD, #10 stud16-14, BL, #8 stud16-14, BL, #10 stud12-10, YL, #10 stud12-10, YL, 1/4" stud12-10, YL, 3/8" stud22-18, RD, Female16-14, BL, Female12-10, YL, Female22-18, RD, Male16-14, BL, Male12-10, YL, Male

120 PIECE CLEAR SEAL HEAT SHRINK TERMINAL KIT

Item# Case61332 1

9 Compartment soft-sided case: 13 1/8" W x 2" H x 4 5/8" D. Tools Included:

Qty.111202015202015

Item #6122161281612016225162261

62311--

Description Specs

-22-18, RD16-14, BL12-10, YL

16-14, BL, 1/412-10, YL, 1/4

WATERPROOF WIRING KIT WITH ZIP-CASE & TOOLS

Item# Case61322 1

21 Compartment box: 18 1/2" W x 3" H x 13 1/16" D. Tools Included:

Qty.11122222223445556661111

Item #612416127161261------60501605116052160531605416055160561605716058160591----

Description Specs6 GA. - 4/0, Range

8 GA. - 4/0, Range1/2" x 1 1/23/4" x 1 1/21" x 1 1/21/2" x 1 1/2", RD3/4" x 1 1/2", RD1" x 1 1/2", RD4/0, 3/83/0, 3/82/0, 3/81/0, 3/81 GA., 3/82 GA., 3/82 GA., 5/16

4 GA., 3/84 GA., 5/16

6 GA., 3/85/163/8

7 GA. - 2/0, RD

64 PIECE HEAVY DUTY BATTERY TERMINAL

KIT WITH TOOLS

Item# Case61302 1

13 Compartment box: 13 1/16" W x 2 1/4" H x 8 3/16" D. Tools Included:

Qty.1115101010101010555

Item #612216123161281602016019160181601516016160101601116004160051

Description Specs

1/43/8

78 PIECE HEAT SHRINK TERMINAL KIT WITH TOOLS

Item# Case61312 1

13 Compartment box: 10 13/16" W x 1 3/4" H x 6 1/2" D. Tools Included:

Qty.11510101010101055555

Item #6121161201602016019160181601516016160101601116004160051600716029160301

Description Specs

1/43/8

92 PIECE HEAT SHRINK TERMINAL KIT WITH TOOLS

L A T E S T A D D I T I O N SF

Item# Length Tow Capacity Ball Case52281 8", 8", 6 3/4" 3,500, 6,000, 10,000 1 7/8", 2", 2 5/16" 1

TRI-BALL TRAILER HITCH

Item# Drop Tow Capacity Ball Case52291 4.79" 3,500, 6,000, 10,000 1 7/8", 2", 2 5/16" 1

ADJUSTABLE TRI-BALL TRAILER HITCH

Item# Material Case08271 Chrome Plated Zamak 12

The cover swivels and the socket is madeof durable plastic. Mounts with #10 screws. Replaces: Seachoice 0825.Fits: Seachoice 0557, 0569, 0570, 0572.Attwood® Series 5100, 5110, 7100.

SPARE LIGHT BASE ASSEMBLY

Item# Material Case08281 Chrome Plated Zamak w/ Rubber Cover 1208291 Black Nylon Plastic w/ Rubber Cover 12

Plug-in type, waterproof snap-on cover. Mounts with #8 screws.

Replaces: Seachoice 0826.Fits: Seachoice 0291, 0292, 0293, 0294, 0295, 0296, 0547, 0559, 0561.Perko® 1311, 1330, 1611, 1630.

Black NylonChrome Plated

SPARE LIGHT BASE ASSEMBLY

Item#52271

Made of 6005 aluminum for excellent corrosion resistence. Mount on frames up to 3 1/2" W x 5" H. Slip resistent rubber logo pad offers sure footing. Step Dimension: 5" W x 9 1/4" H x 9" D. Capacity: 300 lb.Hardware Included:

ALUMINUM TRAILER STEP

Item# Case08181 12

180° rotating clip with magnet allows the light to be mounted anywhere for handsfree use. Constructed of tough water resistant ABS plastic case. LED life is over 110,000 hours and Includes 3 AAA batteries. 100 Lumens. Purchase 12 and receive a display box.

Display Box

LED COMPACT WORK LIGHT

Item# Case46601 3

Water and Shock-resistant.Bright clean light up to 300 lumens—runs 30 days continuously on “low” and runs 16 hours continuously on “high”. Lifetime LED

is unbreakable and never needs replacing. Tough anodized aircraft-grade aluminum with rubberized casing for a sure grip. High, low, and SOS flashing modes. Moonbeam technology lens casts a broad, clear beam. Lifetime Limited Warranty. Runs on 3 D Alkaline batteries (not included).

30-DAY LED FLASHLIGHT

Item# Case46521 12

A waterproof, submersible bright white light with 360 degree visibility. It is perfect for use

as a flashlight, mini lantern, or as a boating light. Submersible to one meter, for 30 min. Unbreakable lifetime LED bulb. (1) AAA size Alkaline battery and carabiner clip included.

SPLASHFLASH GLO™ PERSONAL LOCATOR LIGHT

Item# Size Case46611 1.9" H x 1.2" D 12

Easily converts from a headlamp to a clip light.Steady-on and flashing modes. The bezel glows in the dark and has a built-in rotary switch for On, Off, SOS Flashing. 21 lumens—runs for 8 hours in steady-on mode; 14 hours in flashing mode. Lithium coil cell battery (included). The case is constructed of high-impact ABS plastic with a comfortable headstrap and a magnifier lens that provides a focused beam. Lifetime limited warranty.

EQ3™ GLO LED HEADLAMP

Item# Size Case46631 5.25" H x 2.25" D 6

Glows in the dark—Find it fast!Runs 91 continuous hours. LED provides 120 lumens in high mode and 15 lumens on low mode. 3-mode electronic switch—High, Low, SOS Flashing. Powered by 4, 1.5V AA batteries (not included). The rubberized housing is water and impact resistant. The removable globe and built in recessed hook, at the lantern's base, could be used for hanging the lantern as an area light. Lifetime limited warranty.

PICO GLO™ LED LANTERN

L A T E S T A D D I T I O N S G

Item# Description Case46501 Steady-On Light 1246511 Strobe Light 12

USCG ApprovedCompact LED Light for PFD's. Emits 360 degree light. Unbreakable lifetime LED bulb never needs replacing and runs on 2 AAA alkaline or lithium batteries (not included). Easy twist on/off. Impact-resistant and waterproof (IPX7 rating). Designed to be attached to a Personal Flotation Device. Lanyard cord and hook/loop strap included. Ideal for paddlers and recreational boaters.

4651146501

SEE-ME™ 1.0 PERSONAL LOCATOR

46501:

46511:

Manual Light. Exceeds USCG regulation - visible 3.4 miles on a dark, clear night. 20 Lumens. Runtime: 17 continuous hrs. Strobe Light. Exceeds USCG regulation - visible 2.7 miles on a dark, clear night. 28 Lumens. Runtime: 44 continuous hrs.Strobe rate: 60 flashes per minute

Item# Description Color Pack Case46411 6" Sticks 1 Green, 1 White 2 1246421 6" Sticks 2 Green, 1 White, 1 Red 4 1246400 Jar - 4" Sticks Green, White and Red 50 4

LIGHT STICKS

Item# Color Size Case46731 Yellow 2.6" x 1.6" x .5" 6

This slim design lighter fits easily in a pocket and has an O-ring sealed cover with locking clasp. It's windproof flame withstands winds up to 80 mph. The Piezo-electric ignition lights up to 30,000 times and works when wet. The ABS plastic case is impact resistant and waterproof. It fills quickly and easily with quadruple refined high-performance butane fuel (not included). Equipped with a flame adjustment which provides the proper oxygen mix for optimal performance up to 8,000 feet.

FLOATING LIGHTER

Item# Size Case46621 4.25" D x 7.25" H 3

The name says it all!30 Days of continuous use in "Low" mode, 32 hours of continuous use in "High" mode. 4-mode electronic switch (press button - High, Medium, Low, and SOS flashing). Powered by 3 D-cell alkaline batteries (not included). The rubberized housing is water and impact resistant. The removable globe and built in recessed hook, at the lantern's base, could be used for hanging the lantern as an area light. Lifetime limited warranty.

30-DAY LED LANTERN

Item# Color Pack Case46630 Assorted 50 1

So small you can always have a light with you.

PICO 1.0™ MICRO SAFETY LIGHT DISPLAY JAR

Item# Description Size Pack Case46431 Individual Whistle 2" 1 646430 Display Jar 40 1

The JetScream Whistle is a powerful signaling device that can easily be heard above most natural and man-made noises. It's ear-piercing 122db shriek makes it one of the loudest whistles of its kind. Pea-less construction allows for all-weather use. Made of durable ABS—waterproof and it floats.

Display Jar

JETSCREAM™ FLOATING WHISTLE

Item# Size Case46441 2" x 3" 6

The StarFlash signal mirror is 100% lexan polycarbonate, lightweight, virtually unbreakable, floats and has a built-in precision aiming system to help you signal your target accurately.

STARFLASH® FLOATING SIGNAL MIRROR

L A T E S T A D D I T I O N SH

Item# Size Color Case46711 40" x 50" Yellow 6

EMERGENCY PONCHO

Item# Size Case46801 3.25" x 2.2" x .5" 6

Stainless-steel multi-tool encased in orange plastic.

10+ Tools in One:

SURVIVAL CARD TOOL

Item# Size Case46811 2 1/4" x 1 1/2" x 1" 1

CERAMIC KNIFE SHARPENER

Item# Size Color Case46721 87" x 55" Reflective 24

SURVIVAL PONCHO

Item# Size Case46741 3" x 5" 6

Great for keeping logs in wet environments

WATERPROOF NOTEBOOK

Item# Case19161 10

This easy to use self priming pump is ideal for the removal of fuel, coolant and transmission fluid. Use it to pump out bilge water and trapped fluids. Perfect for any situation where draining is difficult. Includes hoses and adapters.

DELUXE OIL CHANGE PUMP

Item# Color Size Pack Case46700 Assorted 8' Unraveled 24 1

8' of All-Purpose Cord

SURVIVAL BRACELET - DISPLAY JAR

COMING SOON

62002 • HEAT SHRINK RETAIL DISPLAY KIT

14221 • RADIUSED UV TIE CABLES, 8"

TABLE OF CONTENTS 1

SECTION ..................................................PAGE

Anchoring ..................................................60-68

Boat Covers ...............................................86-88

Boatyard & Maintenance ...........................82-85

Electrical Equipment ..................................10-21

Electronics Accessories.............................22-23

Fishing Accessories...................................52-56

Fuel Accessories & Ventilation...................56-60

General Accessories..................................28-32

Hardware ...................................................43-51

Lighting ........................................................2-10

Merchandising Aids.........................................89

Mooring......................................................90-91

Motor Accessories ..........................................79

Plumbing....................................................24-27

Safety Equipment ......................................33-41

Steering Accessories .................................79-81

Trailer Accessories.....................................69-79

Water Ski Accessories ...............................41-42

©2014 Seachoice Products • All Rights Reserved. Printed in U.S.A.t

LIGHTING2

Item # Description Mount Case05071 - Horizontal 12

Replacement Parts09901 Bulbs 12 (Pr.)

BI-COLOR BOW LIGHTS - STAINLESSWith Red & Green Lenses1-mile visibility for sail or powerboats under 39'.Polished stainless steel with black plastic base. 20points, 225°. Supplied with prewired brass socket andbulb. Pre-drilled holes to accommodate three #4screws. Size: 13/8"H x 21/4"D.

Item # Mount Case05031 Horizontal 12


BI-COLOR BOW LIGHT - CHROME/BRASS

With Red & Green LensesMeets CE and USCG requirements for 1NM visibility forsail or powerboats under 39'. Meets ABYC A-16requirements. Meets NMMA Certification Procedure.

12V DC - 8 CP lamp included. Pre-drilled with two countersunk holes toaccommodate #4 screws. Housing is chrome plated brass with black plastic base. Size: 23/8" OD base x 7/8" vertical height.


LED BI-COLOR BOW LIGHT - ZAMAK

With Red & Green Lenses1-mile visibility for sail or powerboats under 39'. Pre-drilled with countersunk holes to accommodate #8screws. Housing is die-cast zamak.Size: 23/4"L x 13/8"H x 21/2" base width.



BI-COLOR BOW LIGHT - ZAMAKWith Red & Green Lenses1-mile visibility for sail or powerboats under 39'. MeetsABYC Standard A-16. 12V DC - 6 CP lamp included. Pre-drilled with two countersunk holes to accommodate #8screws. Housing is die-cast zamak.Size: 23/4"L x 13/8"H x 21/2" base width.

Item # Case02041 6

LED BI-COLOR BOW LIGHT - STAINLESS

With Red & Green Lenses2-mile visibility for sail or powerboats under 66'.Stainless steel with black plastic base. Red/Green lens.Screw size is 8.Size: 31/4" L x 25/16" W x 1- 5/8" H.


BI-COLOR BOW LIGHT- ZAMAK

With Red & Green LensesMeets CE and USCG requirements for 2NMvisibility for sail or powerboats under 66'. Meets ABYC A-16 requirements.

Chrome plated zamak alloy with black plastic base. Red/Green lens. Screw size is 8.Size: 31/4" L x 25/16" W x 15/8" H.


STREAMLINE BI-COLOR BOW LIGHTS - STAINLESSWith Red & Green LensesStainless steel with black plastic base. Screw size is 8.Size: 31/4" L x 25/16" W x 15/8" H


LED BI-COLOR BOW LIGHT - CHROME/ZAMAK

With Red & Green Lenses1-mile visibility for sail or powerboats under 39'. Pre-drilled with countersunk holes to accommodate #8screws. Housing is chrome plated zamak with black plastic base.Size: 4" L x 13/4" H x 31/8" base width.



BI-COLOR BOW LIGHT - CHROME/ZAMAKWith Red & Green Lenses

1-mile visibility for sail or powerboats under 39'.12V DC - 8 CP. Pre-drilled with two countersunk holes toaccommodate #8 screws. Housing is chrome platedzamak with black plastic base.Size: 4" x 31/8", 13/4 H base dimensions.

LIGHTING 3



BI-COLOR BOW LIGHT - CHROME/ZINC

With Red & Green LensesMeets CE and USCG requirements for 1NM visibility forsail or powerboats under 39'. Meets ABYC A-16requirements. Meets NMMA Certification Procedure.

12V DC - 8 CP lamp included. Pre-drilled with two countersunk holes toaccommodate #8 screws. Housing is chrome plated zinc with black plastic base.Size: 4" x 31/8", 13/4 H base dimensions.

Item # Housing Case04901 Black 1204911 White 12


With Red & Green LensesMeets CE and USCG requirements for 2NM visibility for sail or powerboats under 60'.

Plastic casing with ultrasonically welded lenses gasketed to the base. Pre-drilled with two countersunk holes to accommodate #8 screws.Size: 31/2"L x 21/4"W x 15/8"H.

BI-COLOR BOW LIGHT

04901 04911

Item # Description Case05091 Stow-A-Way Bi-Color Light 8


With Red & Green Lenses1-mile visibility for sail or powerboats under39'. 12V DC - 6 CP. Pre-drilled with threecountersunk holes to accommodate #8screws. Base: 15/8" x 4". Head and pole aretriple chrome plated zamak. Non-corrosiveplastic socket. 10" in height.

Item # Mount Case05121 Vertical 12 (Pr.)


SIDE LIGHT - STAINLESSWith Red Lens and Green Lens Pair1-mile visibility for sail or power boats under 39'.Individual red and green sidelights. 10 points, 112.5°.Supplied with prewired brass sockets and bulbs. 21/4"diameter base, 13/8" high. Pre-drilled holes toaccommodate 3 #4 screws for each light. Sold as a pair.

Item # Mount Case05131 Vertical 12 (Pr.)


SIDE LIGHT - CHROME/BRASS

With Red Lens and Green Lens PairMeets CE and USCG requirements for 1NM visibility for sailor powerboats under 39'. Meets ABYC A-16 requirements.This pair meets NMMA Certification Procedure.

Red and green lens. 12V DC - 8 CP lamp included. Pre-drilledwith two countersunk holes to accommodate #4 screws. Housing is chrome platedbrass with black plastic base. Size: 41/4"L x 23/8"W x 7/8"H.

Item # Mount Case02151 Flush 12 (Pr.)

LED SIDE LIGHT - STAINLESS

With Red LED and Green LED Pair. MeetsUSCG requirements for 2NM.Meets ABYC A-16 Requirements.

112° Red and green bulbs. Highly polishedstainless steel side light.Size: 73/4"L x 21/2"H x 23/4"D.

Item # Mount Case05151 Flush 12 (Pr.)

Replacement Parts05141 Socket (For post-2010 model) 1205171 Socket (For pre-2010 model) 1205161 Lens 12 (Pr.)09901 Bulbs 12 (Pr.)

SIDE LIGHT - STAINLESSWith Red Lens and Green Lens Pair. Meets USCG requirements for 2NM. Meets USCG requirements for navigation lights. Meets ABYC A-16requirements. Accepted by NMMA.

112° Red and green lens. Highly polishedstainless steel side light. Bulb can be replacedfrom inside the boat. Size: 73/4"L x 21/2"H x 23/4"D.

Item # Type LED Color Case03211 Port Red 603221 Starboard Green 6

LED CLASSIC SIDE LIGHT - STAINLESS FLANGE

Black plastic housing. Size: 21/2" W x 21/4" D x 23/4" H.

03211 03221

BI-COLOR BOW LIGHT STOW-A-WAY - CHROME/ZAMAK

LIGHTING4

Item # Description Size Fastener Case02361 Rectangular 45/8" x 25/8" x 3/4" D #10 1202381 Round 3" dia. #8 12

LED TRANSOM LIGHT

Meets USCG 2NM requirements.

Clear lens. 12V DC. Flush 304stainless steel with plastic body.

02361 02381

Item # Description Size Fastener Case05361 Rectangular 51/8" x 31/16" x 1" D #10 1205381 Round 3" dia. #8 12

Replacement Parts09901 Bulbs

(for 05381)- - 12 (Pr.)

09931 Bulbs (for 05361)

- 12 (Pr.)

TRANSOM LIGHT - STAINLESS FLANGEMeets USCG requirements for2NM visibility for sail forpowerboats under 66'. MeetsABYC Standard A-16.

Clear lens. 12V DC - 6 CP lampincluded. Flush 304 stainless steelwith plastic body and socket.

05361

05381

Item # Mount Case05391 Vertical 12


TRANSOM LIGHT - STAINLESS FLANGE12 point 135°. Flange made of 304 polished stainlesssteel with clear plastic lens. Supplied with rubbermounting pad. 3" diameter, 13/4" deep. Use #8 screws.



STERN LIGHT - CHROME/BRASS

Meets CE and USCG requirements for 2NM visibility forsail or powerboats under 66'. Meets ABYC A-16requirements. Meets NMMA Certification Procedure.

Clear lens.12V DC - 8 CP lamp included. Pre-drilled withthree countersunk holes to accommodate #4 screws.23/8" OD base x 15/8" projection height. Housing is chrome platedbrass with black plastic base.

Item # Height Case02941 24" 602931 48" 6

LED ALL-ROUND LIGHT

Stainless Steel Tubing12V. Black base. Pre-drilled with countersunkholes to accommodate #8 screws.

Globe Base

Item # Description Case05471 Telescoping All-Round Light 6

Replacement Parts08551 Clear Globe 1209901 Bulbs 12 (Pr.)

ALL-ROUND WHITE LIGHT

TelescopingMeets CE and USCG requirements for 2NM visibility foruse on sail or powerboats under 66'. Meets NMMACertification Procedure.

Clear globe. 12V DC - 6 CP lamp included. Base length33/4", 15/8"W . Pre-drilled to accommodate #8 screws. Baseis chrome plated zinc. Overall length: 231/8".

Item # Description Globe Case05611 Stow-A-Way, 223/8" w/Base White translucent 605591 Stow-A-Way, 22" w/Base Clear 6

Replacement Parts08261 Spare Base Assembly (05611) - 1208501 Translucent White Globe - 1208511 Translucent White Globe - 1208551 Spare Clear Globe - 1209901 Spare Bulbs (05591) - 12 (Pr.)09951 Spare Bulbs (05611) - 12 (Pr.)


Meets CE and USCG requirementsfor 2NM visibility for sail orpowerboats under 66'. Meets NMMAcertification procedure.

12V DC-15 CP lamp included. Pre-drilled to accommodate #8screws. Stow-A-Way base length: 31/4" x 1 - 5/8". Base is chrome plated zinc. 05611 05591

08261

Item # Height Case02951 24" 602961 48" 6

LED ALL-ROUND LIGHT

Aluminum Tubing12V. Includes chrome plated zinc base. Pre-drilled with countersunk holes toaccommodate #8 screws. Tubing also fitsSeachoice base 08251. Globe Base

LIGHTING 5

Item # Description Case05631 Stow-A-Way 22" w/Base 6


ALL-ROUND WHITE LIGHTStow-A-Way2-mile visibility for sail or powerboats under 66'. Stainless steel polewith white translucent globe. 12V DC - 15 CP lamp included. Chromeplated zinc base size is 33/4"L x 119/32"W. 22" overall length. Drilled toaccommodate 3 #8 screws.

Item # Description Case05571 Stow-A-Way 24" w/Base 6

Replacement Parts05691 Pole Light - 24" 805721 Pole Light - 36" 605701 Pole Light - 48" 608251 Base Assembly 1208521 Anti-Glare Globe 1209991 Bulb (906) 12 (Pr.)


Pole

Base

Item # Height Case02911 24" 6

LED ALL-ROUND LIGHT WITH LOCKING BASE

Black Plastic Base360° 6 LED lights. Meets USCG 2NMrequirements. Pre-drilled to accommodate#8 screws.

Globe Base


LED ALL-ROUND LIGHT WITH LOCKING BASE

Aluminum Base360° 6 LED lights. Meets USCG 2NMrequirements. Pre-drilled to accommodate#8 screws.

Globe Base


LED TELESCOPING ALL-ROUND LIGHTWITH LOCKING BASE

Chrome Plated Base360° 6 LED lights. Meets USCG 2NMrequirements. Pre-drilled to accommodate#8 screws.

Globe Base

Item # Description Length Case05761 Stow-A-Way Replacement 48" 6

ALL-ROUND “REDUCED GLARE” LIGHT

Meets CE and USCG requirements for 2NM visibility for sailor powerboats under 66'.

The “Reduced Glare” design focuses the beam of light abovethe operator’s line of sight, which limits glare and improvesoverall night vision. Fits Seachoice base 08261 and Perkobases 1046, 1059 and 1060.

Item # Material Case08251 Die-cast zamak w/ Perma-Plate chrome finish 12

SPARE LIGHT BASE ASSEMBLYFits Attwood 7100 and 5100 series and Seachoice 05571.Also fits Seachoice replacement poles 05691 and 05701.The cover swivels and the socket is made of durableplastic. Mounts with #10 screws.

Item # Material Case08261 Chrome Plated Zinc 12

SPARE LIGHT BASE ASSEMBLYPlug-in type, waterproof snap-on cover. Mounts with #8screws. Fits Perko 1330 and 1630 Series and Seachoice05591 and 05611.

Item # Size Case72051 2" x 15/8" 12 (Pr.)

RUBBER STORAGE CLIPPerfect solution for storing stern lights, boat hooks,gaffs, boat mops, etc. Made of molded black rubber,these clips will accommodate diameters of 3/4" to 1".2 Clips per package.

Meets ABYC Standard A-16.

2-mile visibility for sail or powerboats under 39'.Anti-glare globe. 12V DC - 15 CP lamp included. Baseis pre-drilled and countersunk to accommodate #10screws. Base is die-cast zamak with Perma-Plate®

chrome finish. Overall height: 22". Poles are 3/4"anodized aluminum. Base fits Attwood 7100 and5100 series.

LIGHTING6



MASTHEAD ALL-ROUND WHITE LIGHT - STAINLESSFixed mount 360° clear lens.11/2" H x 25/16" D.Mounting Hole: 3/4".

Item # Mount Case05991 Fixed 12

Anti-Glare09911 Bulbs 12 (Pr.)

MASTHEAD AND ALL-ROUND WHITE LIGHT

Meets CE and USCG requirements for 3NM visibility for sail orpowerboats under 66'. Meets NMMA Certification Procedure.

Clear lens. Two 12V DC - 8 CP lamps included. Base Size: 1" x25/8". Light and base made of UV resistant black polycarbonate.Height: 31/4".

Item # Height Case05851 4" 1205861 8" 12

Replacement Parts09911 Bulb 12 (Pr.)

2NM Visibility. Meets ABYC, NMMA, R.I.N.A.requirements. Approved for Boats to 66'.

Constructed of UV resistant fiberglass reinforced ABS plasticwith UV resistant plexiglass lens. Lights are completelygasketed and seawater proof. Tube made of aluminum.Complete with 12V-10W bulb. Mounts with2 #6 STS PH screws.

05851 05861

Item # Height Case02851 4" 602861 71/2" 6

LED ALL-ROUND LIGHT

Meets USCG requirements for 2NM.

360° 6 LED lights. Pre-drilled toaccommodate #8 screws.

02851 02861



MASTHEAD AND ALL-ROUND WHITE LIGHTFold Down3-mile visibility for sail or powerboats under 66'. Anodizedaluminum 3/4" tube with clear lenses. Two 12V DC 8 CP lampsincluded. Chrome plated zinc base is 29/32" L x 5/8" W. Pre-drilled toaccommodate 2 #8 screws. 101/2" overall height. Two plasticadapters included for flat or “V” mount.

Item # Mount Base Case05931 Horizontal, 125/8" 2" x 11/2" 1205971 Vertical “V” Type, 125/8" 21/4" x 5/8" 10

09911 Spare Bulbs 12 (Pr.)

DELUXE MASTHEAD AND ALL-ROUND WHITE LIGHT

Fold DownMeets CE and USCG requirements for 3NM visibility for sail orpowerboats under 66'. Meets NMMA Certification Procedure.

Plastic adapters to fit flat or “V" mount. Clear lens. Two 12V DC - 8CP lamps included. Pre-drilled holes to accommodate #8 screws. 3/4"aluminum tube. Base is black plastic.

05931 05971

ALL-AROUND LIGHT

LIGHTING 7


LED ALL-ROUND LIGHT

Fold Down. Meets USCG requirements for 2NM.

360° 6 LED lights. Pre-drilled to accommodate #10 screws.

Item # Globe Size Case08501 Translucent White 3" 1208511 Translucent White 3" 1208521 Anti-Glare 21/8" 1208551 Clear Fresnel 21/2" 12

SPARE GLOBE

For All-Round Lights08501: Fits Perko Series 1134, 1137, 1400, 1401, 1403, 1404, 1611;

Fits Seachoice Series 05611 • OD: 19/16". • ID: 11/2"08511: Fits Perko Series 1134, 1137, 1400, 1401, 1403, 1404, 1611;

Fits Seachoice Series 05611 • OD: 19/16". • ID: 11/2"08521: Fits Attwood Series 7100, 7101, 7105;

Fits Seachoice Series 05571, 05691, 05701 • ID: 11/2"08551: Fits Perko Series 1311, 1330;

Fits Seachoice Series 05471, 05591 • OD: 2". • ID: 11/2"

08501, 08511 08521 08551

Item # Type Color Case06121 Bow Light Grey 1206101 Bow Suction Grey 1206151 Stern Suction Grey 1206131 Stern Light 24" Grey 3

Replacement Parts09921 Bulb 1202511 LED Bulb 12

Each light requires 2 “D” cell batteries.06121: Bow Light: Red/Green portable bow light with adjustable

clamp for horizontal surfaces.06101: Bow Suction: Red/Green portable bow light with

durable, heavy duty suction cup.06151: Stern Suction: Durable, heavy duty suction cup. Ideal for ski boats,

sailboats and boaters who do not want anattachment method that might mar the surface.

06131: Stern Light: 24" Pole light with adjustable clamp.Easily mounts to transom.

06121 06101 06151 06131

Item # Case08171 6

WEATHERPROOF FLASHLIGHTHeavy duty plastic. Powered by 2 "D" cell batteries.Guaranteed for life!

Item # Description Case15101 Stainless steel 1215111 Chrome plated 12

Replacement Parts15121 Socket 12

CHARTLIGHT/CIGARETTE LIGHTER12V. Quick connect wires. PlateSize: 2" x 11/2". Clearance behinddash: 21/4". 10A @ 12V.

15101 15111

Item # Description Size Case15001 Plug & Socket 1215011 Socket Only 21/4" L x 11/4" W x 15/8" D 1215021 Plug Only 12

ACCESSORY PLUG AND SOCKETNickel plated phosphor bronzeand nylon. Will accept all othercigarette lighter type units.Equipped with weather sealcover and gasket.10A @ 12V. 15001 15021

Item # Case15061 8

DUAL POWER OUTLETConverts any 12V cigarette lighter socket to dual poweroutlet. LED light indicates power. Fuse included.

Item # Size Amps Case15031 12" of 18 gauge wire 50 12

ACCESSORY SOCKET WITH BATTERY CLIPBrass and plastic construction accessory plug for usedirectly with the battery. Accepts most type cigarettelighter plugs. 12V.

Item # Case15051 12

COILED EXTENSION CORDUsed to add extra length to spotlight and accessory cords• 12V-5A• 150W• 10' black coiled extension cord

PORTABLE BATTERY OPERATED NAVIGATION LIGHT

• 12V, 55W• Light dimensions: 45/8" OD x 21/2"• Bracket dimensions: 53/8" x 3/4"

LIGHTING8

Item # Material Case03501 Cast Aluminum 6

• 8 super LEDs for maximum illumination• Each super LED produces 85 lumens• 12V, 11W• Housing Size: 43/8" W x 4" H• Fastens with a 1/4" bolt• Includes adjustable stainless steel bracket and clamp

mount for up to 1" tubing

Item # Description Case07491 Stainless Steel 10

Replacement Parts07631 Bulb, 55W 12

Item # Description Case07521 Halogen 20

Replacement Parts07631 Bulb, 55W 12

HALOGEN FLOODLIGHTRigid nylon, fiber filled housing with 304 stainless steelmounting bracket and hardware. 12V, 55W halogen beam.41/2" x 67/8". Fastens with 1/4" screws. Draws 4 to 5 amps.

Item # Description Size Amps Case06401 Single Bulb, 4W 9" L x 3" W x 1" H .45 1206411 Single Bulb, 8W 15" L x 3" W x 1" H .6 806421 Double Bulb, 8W 15" L x 3" W x 1" H 1.2 8

06430 F4T5 Bulb (Fits 06401) 12 (Bulk)06440 F8T5 Bulb (Fits 06411, 06421) 12 (Bulk)

FLUORESCENT CABIN LIGHTSilver anodized aluminum base plate with opal diffuser.Black plastic end covers, top mounted rocker switches.Electronic ballast with low current consumption -comes complete with fluorescent tube. 12V.

Item # Dia. OD Height Case06641 4" 51/2" 15/8" 1206651 5" 63/4" 2" 12

DAY OR NIGHT VISION DOME LIGHTHighly polished stainless steelcabin light. Two illuminationfeatures: Bright White and Red.The red light is ideal for nighttime use. Heavy duty clearpattern glass lens. Built instainless steel toggle switch.15W/12V. 12V-6 CP bulbsupplied. Fasten with #6 screws.

06641, 06651 Red LightFeature

Item # Dia. OD Height Case03281 4" 51/2" 15/8" 1203291 5" 63/4" 2" 12

LED DOME LIGHT

Highly polished stainless steel bright white LED cabinlight. Heavy duty festoon clear pattern glass lens. Built instainless steel toggle switch. Fasten with #6 screws.

Item # Dia. Height Case06621 4" 15/8" 1206631 5" 2" 12

Replacement Parts09901 Bulb - 12 (Pr.)

DOME LIGHTHighly polished stainless steel bright white cabin light.Heavy duty festoon clear pattern glass lens. Built instainless steel toggle switch. 15W/12V. 12V-6 CP bulbsupplied. Fasten with #6 screws.

Item # LED Color Bezel Case03101 White (1) Chrome

(1) White6

03111 Red (1) Chrome(1) White

6

03121 Blue (1) Chrome(1) White

6

LED COURTESY INTERIOR LIGHT

12V. 4 LED lights. Pre-drilled to accommodate #6 screws.3" Dia. x 5/8" D. Packed with both chrome and white bezels.

SPREADER LIGHT

LED SPOT LIGHT

LIGHTING 9

Item # Color Case08031 Black 608041 White 6

LED FIXED UTILITY LIGHT

Molded PlasticDimensions: 21/4" x 21/4" x 13/16".Installed in 13/4" diameter opening.

08031 08041



FIXED UTILITY LIGHT

08011 08021



COMPARTMENT LIGHTChrome plated plastic hood. Plastic base plate.Dimensions: 21/2" x 13/16" x 1". Fasten with #8 screws.

Item # Case02501 12 (Ea.)

LED DOUBLE BAYONET BULB

Item # Size Hole Case05451 Standard 3/8" H x 13/4" dia. 1" 1205461 Small 1/4" H x 1" dia. 5/8" 12

05451 05461

Item # Description Hole Case05421 Rear Mount 1" 12


COURTESY LIGHTWaterproofClean-looking, functional andtotally submersible light.Available in rear mount or frontmount. Allows for a wide varietyof uses in livewells, baitwells,storage lockers, rod lockers,swim platforms and stepwells.4W 12V DC.

LED UNDERWATER LIGHT STRIP

• Waterproof• 12V DC• Pre-drilled to accommodate

#8 screws included

Item # Description Case08301 Brite Steel with 6" Wire Lead (Compatible w/ 09981) 1208321 Chrome Plated Brass with 4" Wire Lead 12

BAYONET SOCKETDouble Contact. 1" body.

08301

08321

Molded PlasticIncludes 12V-3W bulb.Dimensions: 21/4" x 21/4" x 13/16".Installed in 13/4" diameter opening.

Turn your incandescent light into a working LED light. Replaces #90 and #1004 bulbs.Bulb No. Seachoice Applications02501: 04981, 05071, 05091, 05831, 05611,

05631, 05471, 05491 05611, 05691, 06621, 06631

• Totally waterproof, can bemounted underwater

• Neoprene sealing gasket included• Bright 3-element LED bulb

LED BAITWELL/COURTESY LIGHT

Item # Lumens Watts Size LEDs LED Color Case03031 12 0.36 4" L x 1/2" W 6 Blue 603401 12 0.36 4" L x 1/2" W 6 Green 603061 12 0.36 4" L x 1/2" W 6 Red 603001 12 0.36 4" L x 1/2" W 6 White 6

03041 20 0.48 6" L x 1/2" W 10 Blue 603411 20 0.48 6" L x 1/2" W 10 Green 603071 20 0.48 6" L x 1/2" W 10 Red 603011 20 0.48 6" L x 1/2" W 10 White 6

03051 24 0.72 8" L x 1/2" W 12 Blue 603421 24 0.72 8" L x 1/2" W 12 Green 603081 24 0.72 8" L x 1/2" W 12 Red 603021 24 0.72 8" L x 1/2" W 12 White 6

LIGHTING10

0251106440 099010982107641 09911

Item # Type Case02501 LED Double Bayonet (Fits #90 & #1004) 12 (Ea.)02511 LED Bulb 12 (Ea.)06430 F4T5 Bulb, 4W Fluorescent 12 (Ea.)06440 F8T5 Bulb, 8W Fluorescent 12 (Ea.)07631 Bulb, Halogen 55W 12 (Ea.)07641 Bulb, Halogen 35W 12 (Ea.)09821 LED Bulb, 12 SMD 12 (Ea.)09831 LED Bulb, 4 SMD 12 (Ea.)09841 LED Bulb, 4 SMD 12 (Ea.)09891 Bulb 3W 12 (Pr.)09901 Bulb - DC Bayonet Base 7.5W (GE 90) 12 (Pr.)09911 Festoon Bulb 10W (PKO 71) 12 (Pr.)09921 Bulb 3W 12 (Ea.)09931 Festoon Bulb 10W (PKO 70) 12 (Pr.)09951 Bulb 12W (GE 1004) 12 (Pr.)09961 Bulb - Wedge Base 4W (GE 194) 12 (Pr.)09971 Bulb - DC Index 25/8W (GE 1157) 12 (Pr.)09981 LED Bulb (Fits 1157) 25/8W 12 (Pr.)09991 Wedge base 10W (906) 12 (Pr.)

These are replacement bulbs for most Seachoice light fixtures.Seachoice SeachoiceBulb No. Applications02501: 04981, 05071, 05091, 05471, 05611, 05611, 05631,

05691, 05831, 05491, 06621, 0663102511: 06121, 06131, 06101, 0615106430: 0640106440: 06411, 0642107631: 07521, 07621, 07681, 0770107641: 0790109821: 05421, 05431, & Trailer Side Lights09831: 04931, 04941, 05011, 05031, 05131, 05201, 05231, 05251,

05851, 05861, 05931, 05971, 0599109841: 05351, 05361, 05371, 0539109891: 08011, 08021, 0808109901: 04981, 05071, 05121, 05151, 05381, 05741, 05831, 0598109911: 04931, 04941, 05011, 05031, 05131, 05201, 05231,

05251, 05851, 05861, 05931, 05971, 0599109921: 06121, 0613109931: 05351, 05361, 05371, 0539109951: 05471, 05611, 05691, 06621, 0663109961: 05421, 05431, & Trailer Side Lights09971: 51401, 51421, 5143109981: 1157 LED09991: 05701, 05571, 05691 (New Style)

06430

0998109931 09951 09961 09971 09991

02501

0984109831

REPLACEMENT BULBS

Item # Volts Watts Size (L x W x H) Case14311 15 1.5 33/4" x 141/2 x 5/8" 12

SOLAR PANEL - 100mA

Battery Maintainer• Weatherproof• Protects against battery

discharge and electronic drain• Maintains smaller 12V batteries• Installs quickly & mounts easily• Extends battery life• Bright blue LED indicator signifies your battery is charging• Limited 2 year warranty• Includes: 10ft power cable, male cigarette lighter adapter, a pair of battery clamps

and a pair of suction cups

ELECTRICAL EQUIPMENT

ELECTRICAL EQUIPMENT 11

Item # Volts Watts Size (L x W x H) Case14321 15 4.5 105/8" x 15 x 5/8" 12

Battery Maintainer• Weatherproof• Protects against battery discharge

and electronic drain• Installs quickly & mounts easily• Extends battery life• DC Power port adapter enables any device with a 12V DC

plug to connect directly to the solar panel (e.g. inverters)• Bright blue LED indicator signifies your battery is charging• Limited 2 year warranty• Includes: 10ft power cable, male cigarette lighter adapter,

pair of battery clamps, DC power port adapter and stainlessmounting screws

Item # Volts Watts Size (L x W x H) Case14331 15 9 141/8" x 201/2 x 3/4" 12

Charge Controller(Optional Equipment Sold Separately)14391 Handles up to

4A at 12V DC applications- - 12

Maintains a steady charge and provides reliable power

An environmentally friendly way to power your appliances that mounts easily. Worksunder cloudy conditions and withstands wind, rain, and snow. Can be combinedwith up to 6 model 14331 solar panels together with the SEACHOICE model 14391charge controller. The SEACHOICE model 14391 charge controller is recommendedto prevent battery overcharge damage when using any combination of 14331's.Includes: 10ft power cable, DC power port adapter (cigarette lighter adapter),battery clamps and four stainless mounting screws. Requires the use of a chargecontroller, SEACHOICE model 14391, sold separately, to prevent battery damagefrom overcharging.

Charge Controller4A maximum capacity. Prevents excessive discharge and overcharging of batteries

1433114391

Item # Case14391 12

SOLAR PANEL CHARGE CONTROLLER • For use with SEACHOICE model 14341 solar panels and

combinations of 14331 solar panels• 4A maximum capacity• Prevents excessive discharge and overcharging of batteries

SOLAR PANEL - 300mA

SOLAR PANEL - 600mA

Item # Volts Watts Size (L x W x H) Case14341 15 20 139/16" x 39" x 3/4" 12

Charge Controller(Optional Equipment Sold Separately)14391 Handles up to

4A at 12V DC applications- - 12

SOLAR PANEL - 1.3A

Helps recharge 12V deep cycle batteries to run small appliances

An environmentally friendly way to power your appliances that mounts easily. Canbe combined with up to 3 model 14341 solar panels together with the SEACHOICEmodel 14391 charge controller. Works under cloudy conditions and withstandswind, rain, and snow. It is recommended that the SEACHOICE model 14391 chargecontroller be used in combination with the 14341 to prevent battery overchargedamage. Charges 1 x 12V or 2 x 6V deep cycle batteries: Laptop computer ~ 3hours, Cooler (12V) ~ 5 hours, 15" LCD TV ~ 5 hours. Includes: 10' power cable,DC power port adapter (cigarette lighter adapter), battery clamps and four stainlessmounting screws. Requires the use of a charge controller, SEACHOICE model14391, sold separately, to prevent battery damage from overcharging.

Charge Controller4A maximum capacity. Prevents excessive discharge and overcharging of batteries

14341 14391

Item # Size Case11551 51/4" Dia. x 25/8" 12

MAIN BATTERY SWITCH

Ignition ProtectedUse as main disconnect switch. Red plastic housing withlarge black plastic knob. For use with systems under 50V- 250A continuous / 360A intermittent.Made in the USA.

ELECTRICAL EQUIPMENT12

Item # Size Case11500 51/4" Dia. x 25/8" 12 (Bulk)11501 51/4" Dia. x 25/8" 12

BATTERY SELECTOR SWITCH

Ignition ProtectedFor use with two or more batteries. For systems under50V. Permits selection between batteries for starting andcharging or operation of both in parallel. 250Acontinuous / 360A intermittent. Made in the USA.

Item # Size Case11591 51/4" Dia. x 25/8" 12

BATTERY SELECTOR SWITCH

Ignition ProtectedFour position without lock. For use with two or morebatteries. For systems under 50V. Permits selectionbetween batteries for starting and charging or operationof both in parallel. 160A continuous / 210A intermittent.

Item # Size Case11561 37/8" x 37/8" x 17/8" 12

COMPACT MAIN BATTERY SWITCH

With Removable Side Panels for Easy Wiring. IgnitionProtectedUse as main disconnect switch. Red plastic housing withlarge black plastic knob. For use with systems under 50V- 315A continuous / 450A intermittent. Made in the USA.

Item # Size Case11531 37/8" x 37/8" x 17/8" 12

COMPACT BATTERY SELECTOR SWITCH

With Removable Side Panels for Easy WiringFor use with two or more batteries. For systems under50V. Permits selection between batteries for starting andcharging or operation of both in parallel. 315A continuous/ 450A intermittent. Made in the USA.

Item # Description Case15041 36" wire w/ alligator clips 12

CIRCUIT TESTERUsed to locate grounds, open circuitsand shorts. Can be used with 6V or12V systems.

Item # Fits Case22060 Group 24 622080 Group 27 3

BATTERY BOXBlack molded high density polyethylene. Protects batteryand area around battery from acid spills. Lid is designedto allow easy access around battery cables and wires.Complete with hold down strap and mounting hardware.

Item # Fits Size Fastener Case22031 Group 24 11" L x 7" W x 11/8" H 4 1222051 Group 27 121/4" L x 71/4" W x 11/8" H 4 1222011 Group 29, 31 13" L x 71/8" W x 1" H 8 12

Replacement Parts78961 38" Replacement Strap - 12

BATTERY TRAY WITH HOLD DOWN STRAP Meets USCG regulations for keeping batteries in place.Poly hold down strap with positive locking quick connectbuckle make changing battery quick and easy. Mountswith #10 pan head screws.

Item # Fits Size Case22021 Group 24 ID: 11" x 71/8" x 11/4" 1222041 Group 27 ID: 125/8" x 71/4" x 11/4" 1222071 Group 29 ID: 13" x 71/8" x 1" 12

BATTERY TRAY

Item # Fits Size Case21961 Group 24 ID: 103/8" x 613/16" x 1/2" 1221981 Group 27 ID: 115/16" x 613/16" x 1/2" 1221991 Group 29 ID: 131/8" x 67/8" x 1/2" 1221971 Group 31 ID: 1215/16" x 63/4" x 1/2" 12

PREMIUM BATTERY TRAYComplete with stainless steel hold down rods. Note: Willnot fit Exide® batteries.

Item # Size Color Case78981 11/2" x 42" Black 12

BATTERY OR TIE-DOWN STRAPPoly-Pro WebbingIdeal for securing battery boxes and other equipment.Complete with brackets and stainless steel screws.

Meets USCG regulations for keeping batteries in place.Complete with stainless steel hold down rods, nuts & washers.


Item # Material Case13661 Plastic Coated Lead Alloy 12 (Pr.)

BATTERY TERMINAL - COATED

Clamp type wing nut terminal made of lead alloy. Epoxycoating aids in polarity identification and corrosionresistance. 3/8" positive stud and 5/16" negative stud. Fits allstandard battery posts.

Item # Material Case13671 Lead Alloy 12 (Pr.)

BATTERY TERMINALClamp type wing nut terminal made of lead alloy. Brassplated wing nuts. 3/8" positive stud and 5/16" negative stud.Fits all standard battery posts.

Item # Description Case13691 Contains 1 black and 1 red protector boot 12 (Pr.)13701 Contains 1 black and 1 red protector boot 12 (Pr.)

BATTERY TERMINAL COVERContains 1 red and 1 blackprotector boot. Designed for usewith 4 and 6 gauge cables.13701: Used to accommodatewing nut battery terminals(Model 13671).

13701 13691

Item # Size Case19781 5' Cable w/ Fittings 1219761 10' Cable w/ Fittings 1219771 20' Cable w/ Fittings 12

COAXIAL ANTENNA CABLE ASSEMBLYRG58U white coaxial cable with PL259 fittings on bothends. Lengths to fit most applications.

Item # Description Model # Case19811 Connector w/ Adapter PL259 & UG175 1219821 VHF Male Connector PL259 1219831 Adapter for RG58U Cable UG175 1219841 Adapter for RG59U Cable UG176 1219851 Double Connector PL258 12

VHF ANTENNA CONNECTORS

Chrome Plated Brass

VHF CONNECTOR WITH ADAPTER19811: PL259 (19821) with UG175 (19831) cable adapter.

Use with RG58U cable.

COAXIAL CABLE PLUG - PL25919821: Use with RG58U or 8X cable.

Takes adapter plug UG175 (19831) or UG176 (19841).

COAXIAL CABLE ADAPTERS Both fit cable plug 19821 (PL259).19831: Use with RG58U cable - UG175.19841: Use with RG59U cable - UG176.

DOUBLE FEMALE CONNECTOR - PL25819851: Attaches to PL259 (19821) cable plug.

19811

19821 19831/19841 19851

Item # Hole Case16251 Up to 11/4" 12 (Pr.)

PLASTIC WIRE COVERGives boat that finished look. Covers unsightly wire pass-thru holes. Made of durable black plastic that will notcorrode. Covers holes up to 11/4 in diameter.


CABLE THRU HULL FITTINGWatertight Thru Hull FittingSelf attaching. No additionalhardware required. Acceptssingle or double cable. 2"maximum hull, requires 3/4" hole.

17901 17921


Item # Size Base Case10011 Outlet: 1/4" 11/4" dia. 1210021 Outlet: 5/16" 11/4" dia. 1210031 Outlet: 3/8" 11/2" dia. 12

CABLE OUTLETWatertight chrome plated brass. Threaded cap and rubbergasket. For complete waterproofing of cable.Use #6 screws.

Item # Size Case14001 3/4" x 60' 12

ELECTRICAL TAPEBlack vinyl electrical tape. Flameretardant. 7 mil. roll. UL listed.

Item # Size Color Case14201 4 oz. Black 12

LIQUID ELECTRICAL TAPEHundreds Of Uses!Forms a protective dielectric coating onelectrical connections. Seals out moisture,prevents corrosion. Adheres to all metal,plastic, vinyl, rubber, and compositesurfaces. Stops screws from loosening dueto vibration. Safe and easy to use and isfast drying. Applicator brush built into cap. In Use

Item # Amps Case13651 50 12 (Pr.)

BATTERY CLIPFor use with all battery operatedelectrical devices. Copper plated.1" jaw opening. 3" long.

Item # Color Size Pack CaseStandard Cable Ties14101 UV Black 8" 25 1214111 UV Black 8" 100 1214121 UV Black 8" 1000 12

Mounting Cable Ties14161 UV Black 8" 25 1214171 UV Black 8" 100 1214181 UV Black 8" 1000 12

CABLE TIES

• Strength: 50 lbs.• 14161, 14171 & 14181: Accommodates # 8 screw

Standard

Mounting

Item # Description Case13801 Round 12

MOLDED MARINE CONNECTORPolarized 2 contact connector.For marine and automotive use.Molded ABS interiors. Protectedby PVC caps. For 6V, 12V and24V applications. 10A @ 12V.

13801 Open 13801 closed

Item # Case10121 12

DECK CONNECTORWater-tight Chrome Plated Brass11/2" dia. chrome plated brass flange with waterproofplastic snap-on cover. Two pin double contact socket andplug. Plug has protective black plastic boot. Fasten with#4 screws. 3A @ 12V.

Item # Case10161 12

DECK CONNECTORWater-tight Chrome Plated BrassBrass double contacts supplied complete with blackplastic threaded knurled cap and chain. Insures positivewatertight fitting. Fasten with #6 screws. Flange diameter11/2". Overall length: 23/4". 3A @ 12V.

Item # Input Output Case15071 12-24 Volt 5 Volt/2 Amps 12

Use with: Mobile Phones, iPad, iPod and Phones, MP3/4, Digital Camera, etc.• LED indication light • Plugs into most cigarette lighters or 12V accessory outlets to allow use of up

to 2 USB devices

DUAL USB POWER ADAPTER

Item # Description Size Case15001 Plug & Socket 1215011 Socket Only 21/4" L x 11/4" W x 15/8" D 1215021 Plug Only 12

ACCESSORY PLUG AND SOCKETNickel plated phosphor bronzeand nylon. Will accept all othercigarette lighter type units.Equipped with weather sealcover and gasket.10A @ 12V. 15001 15021

Item # Case15061 8

DUAL POWER OUTLETConverts any 12V cigarette lighter socket to dual poweroutlet. LED light indicates power. Fuse included.


Item # Size Amps Case15031 12" of 18 gauge wire 50 12

ACCESSORY SOCKET WITH BATTERY CLIPBrass and plastic construction accessory plug for usedirectly with the battery. Accepts most type cigarettelighter plugs. 12V.

Item # Case15051 12

COILED EXTENSION CORDUsed to add extra length to spotlightand accessory cords• 12V-5A• 150W• 10' black coiled extension cord

Item # Gang Size Case13561 4 4"L x 15/16"W x 11/16"H 1213571 6 43/8"L x 15/16"W x 11/16"H 1213581 8 51/2"L x 15/16"W x 11/16"H 1213591 10 65/8"L x 15/16"W x 11/16"H 12

TERMINAL BLOCKCorrosion resistant construction. Moisture repellentbakelite insulator base. Nickel plated brass terminalsand #8-32 screws. Protective insulator barrier strips.Rated for 30A @12V.

Item # Gang Size Case13501 4 3"L x 11/2"W x 3/16"H 1213531 6 41/2"L x 11/2"W x 3/16"H 12

TERMINAL BLOCKMolded plastic base with brass hardware. 30A @ 12V.

Item # Gang Size Case13631 10 53/4"L x 11/4"W x 11/32"H 12

TERMINAL BLOCKCorrosion resistant construction. Moisture repellentbakelite insulator base. Solid brass bus bar. Brass 1/4" dia.stud terminals and hex nuts. Brass #8-32 terminalscrews.

Item # Gang Size Case13351 4 23/4" L x 23/4" W x 5/8"H 1213361 6 41/4" L x 23/4" W x 5/8"H 12

FUSE AND JUNCTION BLOCKHeavy Duty BaseBrass fuse clips and contacts with #8-32 screws.For SFE 20A or 3AG series fuse.

Item # Gang Size Case13431 4 31/2" L x 3" W x 3/4" H 1213441 6 41/2" L x 31/4" W x 7/8" H 1213451 8 6" L x 31/4" W x 7/8" H 12

FUSE AND TERMINAL BLOCKHeavy Duty Molded BaseBrass clips and contacts with common buss bar. UseSFE 20A or 3AG series fuse. Each buss bar has one#8-32 x 3/4" stud with two hex nuts.

Item # Gang Size Case13301 6 33/4" L x 35/16" W x 13/16" H 1213311 10 5" L x 35/16" W x 13/16" H 12

ATO/ATC FUSE BLOCK Heavy duty black plastic moldedbase with ground bar. 30A @12V DC.

1330113311

Item # Fits Case12611 12531 & 12541 switch panels 12

FUSE HOLDERPanel MountSquare face panel mount fuse holder.Accepts up to 10A fuses.

Item # Fits Case12600 12511 & 12521 switch panels 25 (Bulk)12601 12511 & 12521 switch panels 12

FUSE HOLDERPanel MountFor 1/4" x 11/4" fuses. (fuses not included), with bayonet-type knob spring pressure contact. Complete with gasketand nut. For panels through 5/16".

Item # Description Gauge Case12701 10A fuse holder w/spare 16 1212711 20A fuse holder w/spare 14 1212721 30A fuse holder w/spare 10 12

12731 10A fuse holder 16 1212751 20A fuse holder 14 1212741 30A fuse holder 10 12

Watertight In-LineMolded of heat resistant non-breakable plastic."Push together" type is watertight.

12701, 12711, 12721: Has spare fuse compartment.Supplied with two nickel platedbrass fuses.

12731, 12741, 12751: Supplied with nickel plated brassfuse. Fits 1/4" x 11/4" fuses. 8" Wire.

12731, 12741, 12751

Item # Fuse Case12651 30A 12

FUSE HOLDERIn-Line, Heavy Duty30A fuse holder with 41/2" of 12 gauge orange wire leads.30A fuse included.

Item # For Case12661 6V and 12V applications

Fuse20A 12

FUSE HOLDERIn-Line, Heavy Duty16 gauge wire. Accommodates avariety of sizes. Fuse not included.

12701, 12711, 12721FUSE HOLDER


Item # Fuse Gauge Case12681 20A 16 12 (Pr.)

IN-LINE WATERPROOF FUSE HOLDERWatertightYellow neoprene fuse holder is waterproof and is to beused with AGC fuse. Sold in pairs.

Item # Fuse Gauge Case12761 10A 16 1212771 30A 12 12

IN-LINE FUSE HOLDER/ATO-ATCWater ResistantEasy to install, easy to change ATO-ATC fuse holder. Used inmost recreational vehicles. Comes with cap to seal out moisture.Brass electrical contacts. Fuse included.

Item # Fuse Case12671 Up to 30A 12

ATO/ATC FUSE HOLDERWater TightExtra heavy duty weatherproof fuse holder. 12 gauge wireleads for easy hook-up. Fuse not included.

Item # Gang Size Case12321 4 41/4" L x 4" W x 13/4" D 1212331 6 61/4" L x 4" W x 13/4" D 1212341 8 81/4" L x 4" W x 13/4" D 12

Replacement Parts12461 Repl. LED Rocker Switch-12V 1213231 Repl. 5A Circuit Breaker 1213241 Repl. 6A Circuit Breaker 1213251 Repl. 8A Circuit Breaker 1213261 Repl. 10A Circuit Breaker 12

LED SWITCH PANEL

Molded Black Plastic• 12V• Pre-drilled with countersunk holes to accommodate #8 screws

12321: Contains (1) 4A, (1) 6A, (1) 8A, and (1) 10A12331: Contains (2) 5A, (2) 6A, (1) 8A, and (1) 10A12341: Contains (1) 4A, (2) 5A, (2) 6A, (2) 8A, and (1) 10A

Item # Gang Size Case12491 4 51/4" x 7 1/2" 612501 6 51/4" x 7 1/2" 6

Replacement Parts12961 Replacement Contura rocker switch 1212371 Clear Boots F/Push to Reset Breakers, (2 pk) 12

BREAKER PANEL• Lighted waterproof

rocker switches • Made of 5052 aluminum

and powder coat finish• Pre-wired with reset

breakers and clear boots• Tinned copper wire• UL rated

Note: Replacement circuit breakers - seeseries 13091 thru 13151

12491: 4 Switch. Includes 1-5A, 1-10A, 1-15A, 1-20A breakers and 20 labels12501: 6 Switch. Includes 2-5A, 2-15A, 2-20A breakers and 27 labels

12491 12501

Item # Amps Rating Case13101 10 65V DC/227V AC 1213121 15 65V DC/227V AC 1213141 20 65V DC/227V AC 1213161 30 65V DC/227V AC 1213181 40 65V DC/125V AC 1213201 50 65V DC/125V AC 12

AC/DC PANEL BREAKERSingle Pole. Circuit breakers are magnetic hydraulic andare designed for marine use. • UL and CSA approved• Current: AC/DC• Delay: Medium• Actuator: Single/White

Item # Amps Case13091 5 1213111 10 1213131 15 1213151 20 1213171 30 12

Replacement Parts12371 Clear Boots F/Push to Reset Breakers, (2 pk) 12

CIRCUIT BREAKER

Push to ResetCalibrated and tested. Single polecircuit breakers. A proven “Snap-Acting” bi-metallic thermalsensing mechanism used tointerrupt current flow. Manualpush to reset reinstates currentflow Max panel thickness 1/4", 3/8" hole. 1/2 W x 11/4" H x 11/2 Deep

13091 12371


Item # Amps Case13051 20 1213061 30 1213071 40 1213081 50 12

Replacement Parts13711 Breaker Bracket 12

MANUAL CIRCUIT BREAKER• 12/24V DC• Type III manual reset• Plastic body with molded

mounting brackets• Two 10/32 threaded studs • Push to reset • Ideal for trolling motor

installation

13051

13711

Item # Description Size Case09851 LED 1/4" 1209861 Incandescent (with 4V bulb) 5/16" 12

INDICATOR LIGHTRed indicator lights with 6"leads.Use as 14Vwarning light.

09851: For use as warning lightin panels09861: Use as visual warning ofengine/bilge problems

09851 09861

Item # CaseMax PanelThickness Case

11621 Brass To 1" 1211641 Plastic To 11/8" 12

IGNITION STARTER SWITCHHeavy Duty• 3 Position: Off - Ignition - Start• 3 Terminals• 15A @ 12V DC• Chrome plated brass face nut

and brass back-up nut• Stainless steel springs

11621: Mounting stem 17/32"L, 13/16" - 24 thread dia. 11641: Mounting stem 17/16"L, 13/16" - 20 thread dia.

Overall Dimensions: 31/4"L; 17/16" dia.

1162111641

Item # Case11650 12 (Bulk)11651 12

JOHNSON/EVINRUDE IGNITION STARTER SWITCH“Push To Choke” Feature 3 Position:Off - Ignition - Start6 Terminals. Replacement for OMC 393301. Pollak 33-105. Fits most OMC inboard/outboard powered boats.20A @ 12V DC. Supplied with two keys.Overall Size: 27/64" L: 129/64" dia.

Item # Description Case11681 Switch w/ Coil Lanyard 12

Replacement Parts11671 Coil Lanyard w/ 7 Keys 1211691 Coil Lanyard 12

UNIVERSAL KILL SWITCH AND LANYARD 50" coil type lanyard. Blacknylon casing. 5A @ 12V.

11671

Item # Amps Case11711 5 12

HORN SWITCHHeavy Duty Momentary “On-Off”Push button switch. Black plastic button, chrome platedbrass housing. 11/2" dia. switch. Overall width is 25/8".Center to center holes 21/16" apart.

11681

12211

12231


Item #Max PanelThickness Case

11751 1" 1211761 1/2" 1211771 1" 12

MOMENTARY PUSH BUTTON SWITCH

Heavy Duty 2 Position: Off - Momentary On. Normally “Off” S.P.S.T.6V - 36V DC. Non-corrosive construction.11751: Momentary push button switch. Polyester body and silver contacts with

special moisture proof rubber cap. 30A @ 12V DC.50A @ 6V DC. Insulated. Chrome plated brassfittings included.

11761: Plasticized body sealed against moisture & dirt. Black moisturerepellent rubber button cover. Two 18 gauge wire leads, 12" L. Mounting stem 15/16" L, 5/8" - 32 thread dia.

11771: Gasket sealed case protects against moisture and dust. Molded plasticinsulator with protective barrier between terminals. Black moisturerepellent rubber button cover. Silver contacts.Mounting stem 13/8" L, 5/8" - 32 thread dia.

11751 11761 11771

Item # Positions Terminals Rating Case12001 2 - On/Off 2 15A @ 12V DC

10A @ 24V DC12

12011 2 - Off/ Mom. On 2 15A @ 12V DC 10A @ 24V DC

12

12021 3 - On/Off/On 6 15A @ 12V DC10A @ 24V DC

12

12031 Mom On/Off/ Mom On 6 15A @ 12V DC10A @ 24V DC

12

TOGGLE SWITCH

12031: Ideal for trim tabs.

12001, 12011 12021, 12031

Item # Positions TerminalsMax PanelThickness Case

12201 2 - On/Off 3 1/4" 1212211 2 - Off/Mom On 3 1/4" 1212221 3 - On/Off/On 6 1/4" 1212231 3 - Mom On/Off/Mom On 6 1/4" 12

ILLUMINATED TOGGLE SWITCH

Black plastic paddle and locking ring with lever seal and knurled cap nut. Sealed to resist water penetration. Requires 15/32" mounting hole. Fits panels through 1/4".

12001: Ideal for lights, blower, pump, etc.

12011: Ideal for starter, horn or choke.

12021: Ideal for running & anchor lights, wipers, manual/auto bilge pumps.

Item # Description Case12361 Black w/Brass Threads (2 pack) 1212391 Black w/Brass Threads 1212401 Grey w/Brass Threads 12

TOGGLE BOOT SEALFits standard toggle switches with 15/32"-32 mountingstem. Accommodates toggle handles through 11/16" L .Protects against moisture and dirt. Completely coverstoggle handle. Available in Black and Grey with hexnut. Brass threads.

Red plastic paddle that illuminates when underload. Complete with locking ring and knurledcap nut. Sealed to resist water penetration.Requires 15/32" mounting hole. Rated 12V.Standard carton: 12.

12201: Ideal for lights, blower, pump, etc.12211: Ideal for starter, horn or choke.12221: Ideal for running & anchor lights,

wipers, manual/auto bilge pumps.12231: Ideal for use with trim tabs

Item # Case11781 12

PUSH BUTTON STARTER/HORN SWITCHHeavy Duty 2 Position: Off - Momentary On. Normally “Off”Fits panels up to 1" thick. Insulated. 25A@ 6V DC. 15A @12V DC. Supplied withchrome plated brass face nut, brasswasher and back-up nut. Stainless steelsprings. 27/8" Length. Mounting stem11/4" L, 5/8" - 32 thread dia.

Item # Case11701 12

HORN SWITCHRed push button switch used for horn button or anymomentary function. Mounts in 1/2" hole and used onpanels up to 1/4" thick.


Item # Positions TerminalsMax PanelThickness Rating Case

12061 2 - Off/On (SPST) 2 Screw 1/4" 10A @ 12V DC Lamp Load - 3A @ 250V AC - 6A @ 125V AC 15A @ 12V DC Inductive Load 1212071 2 - Off/On (SPST) 6" Wire Leads 3/8" 35A @ 6V DC 20A @ 12V DC, 3A @ 250V AC - 6A @125V AC 1212101 2 - Off/On (SPST) 2 Screw 3/8" 25A @ 12V DC, 10A @ 250V AC - 20A @125V AC 1212111 2 - On/On (SPST) 3 Screw 3/8" 25A @ 12V DC, 10A @ 250V AC - 20A @ 125V AC 1212121 3 - On/Off/On (SPST) 3 Screw 3/8" 25A @ 12V DC, 10A @ 250V AC - 20A @ 125V AC 1212131 2 - On/On (DPDT) 6 Screw 3/8" 25A @ 12V DC, 10A @ 250V AC - 20A @ 125V AC 1212141 3 - On/Off/On (DPDT) 6 Screw 3/8" 25A @ 12V DC, 10A @ 250V AC - 20A @ 125V AC 1212151 2 - Off/ Mom On (SPST) 2 Screw 3/8" 25A @ 12V DC, 25A@ 6 & 12V DC Inductive Load 20A @ 6 & 12V DC Lamp Load 1212161 3 - Mom On/Off/Mom On (SPST) 3 Screw 3/8" 25A @ 12V DC, 25A@ 6 & 12V DC Inductive Load 20A @ 6 & 12V DC Lamp Load 12

All toggle switches have a chrome plated brass handle, mounting stem and face nut. Mounting stems are 15/32" L; 15/32"-32 thread diameter.

12061: Is Heavy Duty. S.P.S.T. Non-corrosive construction throughout. Durable, moisture repellent plastic housing.

12071: Has 6" wire leads. With nickel plated “Off-On” indicator plate assembled. Bat handle. Standard carton contains 12 each.

TOGGLE SWITCH

12061 12071 12101 12111

12121 12131 12151 1216112141

Item # Positions Color Type Terminals CaseNon-Illuminated12811 On/Off White SPST 2 1212891 Mom/Off White SPST 2 1212931 Mom/Off/Mom White SPST 3 1212851 On/Off/On White DPDT 6 1212951 Mom On/Off/Mom On White DPDT 6 1212801 On/Off Black SPST 2 1212881 Mom/Off Black SPST 2 1212921 Mom/Off/Mom Black SPST 3 1212841 On/Off/On Black DPDT 6 1212941 Mom On/Off/Mom On Black DPDT 6 12

Illuminated12971 On/Off White SPST 3 1213011 Mom/Off/On White DPST 4 1212991 On/Off/On White DPDT 7 1213031 On1/Off/On1&2 White DPDT 7 1212961 On/Off Black SPST 3 1213001 Mom/Off/On Black DPST 4 1212981 On/Off/On Black DPDT 7 1213021 On1/Off/On1&2 Black DPDT 7 12

CONTURA ROCKER SWITCH

Sealed front panel components give these switches complete protection againstdust and prolonged spray and submersion. Switches are vibration, shock, moistureand salt spray resistant. Base is made of durable polyester while actuator is of apolycarbonate material. Rated 20A @ 12V, 15A @ 125VAC and 10A @ 250VAC.Requires .830"W x 1.45"L holes.

12811 12841 12991

Item # Positions Color Type Terminals CaseNon-Illuminated10811 On/Off White SPST 2 1210891 Mom/Off White SPST 2 1210931 Mom/Off/Mom White SPST 3 1210851 On/Off/On White DPDT 6 1210951 Mom On/Off/Mom On White DPDT 6 1210801 On/Off Black SPST 2 1210881 Mom/Off Black SPST 2 1210921 Mom/Off/Mom Black SPST 3 1210841 On/Off/On Black DPDT 6 1210941 Mom On/Off/Mom On Black DPDT 6 12

Illuminated10971 On/Off White SPST 3 1211011 Mom/Off/On White DPST 5 1210991 On/Off/On White DPDT 5 1210961 On/Off Black SPST 3 1211001 Mom/Off/On Black DPST 5 1210981 On/Off/On Black DPDT 5 12

ROCKER SWITCH

Rated 16A @ 12V. Requires 1" x 13/4" cut out. 10811 10801 10971


Item # Positions Circuits RatingPanel Thickness Case

11841 Off - On 1 6V - 36V DC - 10A @ 12V DC 5/8" 1211901 Off - On 1 25A @ 6V DC - 15A @ 12V DC 1" 1211911 Off - On - On Both #1, #2 2 25A @ 6V DC - 15A @ 12V DC 1" 1211921 Off - On #1 - On #2 2 25A @ 6V DC - 15A @ 12V DC 1" 12

PUSH-PULL SWITCH

Heavy Duty. All push-pull switches have mounting stems: 11/4" L x 3/8" dia.

11841: 2 Position: Off - On. One circuit. Normally “Off" S.P.S.T. Non-corrosive construction. Plasticized body sealed against moisture and dirt. Two 18 gaugeinsulated copper wire leads, 12" L. Chrome plated brass knob and face nut.

11901: 2 Position: Off - On. Chrome plated brass face nut, washer and back-up nut. Chrome plated plastic knob.Stainless steel springs.

11911: 3 Position: Off - On #1 - On On Both #1, #2. First “On” energizes one circuit. Second “On” energizes both circuits. Brass hex back-up nut, brass washer,chrome plated brass face nut. Chrome plated plastic knob.

11921: 3 Position: Off - On #1 - On #2. Two separate circuits. Suited for anchor lights and a separate circuit for running lights. Brass hex back-up nut, brass washer.Chrome plated plastic knob.

11841 11901 11911 11921

Item # Positions Circuits RatingPanel Thickness Case

11931 Off - On 1 25A @ 6V DC - 15A @ 12V DC 1" 1211941 Off - On #1 - On Both #1, #2 2 25A @ 6V DC - 15A @ 12V DC 1" 12

PUSH-PULL SWITCH

With Spade ConnectionsSwitches with spade connections make installation quick and easy. Chrome plated brass facenut, washer and back-up nut. Chrome plated plastic knob. Stainless steel springs. Available inthe two most popular styles.

11931: 2 Position: Off-On. Chrome plated brass face nut, washer and back-up nut. Chromeplated plastic knob. Stainless steel springs.11941: 3 Position: Off-On - On. First “On” energizes one circuit. Second “On” energizes bothcircuits. Brass hex back-up nut, brass washer, chrome plated brass face nut. Chrome platedplastic knob.

Item # Positions Terminals Case12411 On/Off 2 1212421 On (Red)/Off 3 1212431 On-Off-On 6 1212441 On (Red)/Off/On (Red) 6 12

ROCKER SWITCH• Snap mount thermo-plastic housing • 12V - 15A• Fits panels up to 1/4" thick• Overall size: 13/4" x 15/16"• Cut-out size: 1" x 3/4". With plug-in type terminals

12411 12441

11931 11941

Marine grade heat shrinkablequick disconnect terminals.99.9 % pure copper withbutted seam barrel, tinplated. Clear polyolefin 3:1shrink ratio tubing withadhesive lining providesmaximum clarity for wireinspection purposes. Simplyinsert the wire, crimp andheat shrink for a completeenvironmental seal.

Female / 22-18 Female / 16-14 Female / 12-10 Male / 22-18 Male / 16-14 Male / 12-10


Item # Wire Range Connection Color Pack Case60271 22-18 Female Red 25 1060291 16-14 Female Blue 25 1060311 12-10 Female Yellow 25 10

60281 22-18 Male Red 25 1060301 16-14 Male Blue 25 1060321 12-10 Male Yellow 25 10

HEAT SHRINK INSULATED DISCONNECTS

Item # Material Case19500 High Impact White Nylon 12 (Bulk)19501 High Impact White Nylon 12

NylonHi-Impact super tough nylon. Weather resistant. Accepts allantennas with 1" - 14 threads. Comes with stainless steelhardware. Positive lockdownratchet handle. Center to center 113/16" x 213/16". 19501

19650 19690

ELECTRONICS ACCESSORIES22

Item # Size Case19630 14" D x 53/4" H (w/ mount) 4

This 14" compact antennais the perfect solution forany type of boat. Includesadjustable gain control withseparate plates for wall orflush mounting, 50' coaxcable (RG-59), gold plated"F" connectors and 5' coaxTV set cord. Made of UVresistant material.• Weight: 2 lbs. • Power Supply: 12-24V

MARINE OMNIDIRECTIONAL TV ANTENNA - ANALOG AND DIGITAL

Item # Size Case19751 5" x 5" 10

VHF EXTERNAL SPEAKERWhite, water-resistant, cycolac case 5W speaker iscompatible with all VHF radios. 4 ohms. Comes equippedwith 9.5' cable, plug, stainless steelmounting bracket and hardware.

Item # Material Case19921 Stainless Steel 12

MICROPHONE CLIP

One-piece construction. 1" x 115/16". Features an integralspring pressure finger to hold the microphone in place.Fits all standard microphones on hailers,CBs and VHF radios.

Item # Color Case19991 Black 12

NYLON MICROPHONE CLIPOne piece clip molded of tough nylon. No more rust orscratches. 13/8" x 13/8". Fits all standard microphones onhailers, CBs and VHF radios. Complete with stainlessmounting screws. One per card.

Item # Length Case Case19600 42" 4 30

VHF POWER BOAT ANTENNATapered stainless steel whip with rubber safety. Sealed internal copperelement with a molded reinforced UV resistant nylon body. Supplied withPL259 twist-on connector, 15' of RG58U coax and 1" x 14 tpi mountingadapter. Weatherproof solderless connector on antenna allows installationwithout soldering, simplifying the replacement of existing antennas. Can beused in grounded or ungrounded marine installations.• Impedance: 50 ohms• Gain: 3 dB performance• Max Input: 100W

VHF SAIL BOAT ANTENNATapered stainless steel whip with rubber safety. Sealed internalcopper element with a molded reinforced UV resistant nylon body.Frequency: All VHF marine bands.Supplied with stainless steel "L" masthead bracket and PL259 twist-on connector for attachment of coax to antenna, simplifying thereplacement of existing antennas. Can be used in grounded orungrounded marine installations.

• Impedance: 50 ohms• Gain: 3 dB performance• Max Input: 10W

Item # Length Description Case19650 8' White Nylon Ferrule 1019690 8' CPB Ferrule 10

VHF 8' MARINE ANTENNAConstructed of high quality fiberglass. This 6 dB gaincomes complete with 14' 9" nominal RG58U cable andPL259 connector and UG175 connector.Ferrule: Standard 1" - 14 thread. 50W.

ANTENNA RATCHET MOUNT

Item # Material Case19521 Chrome Plated Brass 1219531 Stainless Steel 12

ANTENNA RATCHET MOUNTFour-way ratchet design available ineither chrome plated cast polishedbrass or stainless steel. Formounting to deck or bulkhead. Has9/32" access hole for cable. Standard1" - 14 male thread. 19521: Base: 25/8" x 35/8". Center

to center: 17/8" x 3" 19531: Base: 21/4" x 33/4". Center

to center: 11/2" x 3" 19521 19531

Item # Length Case19620 42" 30

Item # Size Case72061 3/8" 12 (4 Pk.)72071 5/8" 12 (4 Pk.)72081 1" 12 (2 Pk.)

ANTENNA, ROD AND TOOL HOLDERWhite RubberFlexible fishing rod and tool holder. Larger size willaccommodate boat hooks and boarding ladders.

Item # Size Base Case10011 Outlet: 1/4" 11/4" dia. 1210021 Outlet: 5/16" 11/4" dia. 1210031 Outlet: 3/8" 11/2" dia. 12

Item # Fits Size Case19581 Antennas with standard 1"-14 threads 4" 12

Item # Material Case19541 316 cast stainless steel 10

ELECTRONICS ACCESSORIES 23

Item # Color Case19561 White 10

ANTENNA MOUNTNylon Rail MountFits rail tubing 7/8" or 1" and standard 1"-14 threadedantenna ferrules. High impact nylon.

ANTENNA MOUNTStainless Steel Rail MountHighly polished, fits both 7/8" and 1" rails and standard1"-14 threaded antenna ferrules.

ANTENNA BASEAll stainless steel construction. Ideal forTV, Loran, GPS and VHF antennas.

Item # Hole Case16251 Up to 11/4" 12 (Pr.)

PLASTIC WIRE COVERGives boat that finished look. Covers unsightly wirepass-thru holes. Made of durable black plastic that willnot corrode. Covers holes up to 11/4 in diameter.


CABLE THRU HULL FITTINGWatertight Thru Hull FittingSelf attaching. No additionalhardware required. Acceptssingle or double cable. 2"maximum hull, requires 3/4" hole.

17901 17921

Item # Size Screws CasePOLISHED STAINLESS STEEL16141 121/32" x 13/4" x 7/16" #6 1216151 25/32" x 21/8" x 15/32" #6 1216231 33/4" x 33/4" x 17/8" #6 12

CHROME PLATED BRASS16101 19/16" x 11/2" x 15/32" #4 1216131 2" x 23/32" x 19/32" #6 1216201 33/4" x 33/4" x 17/8" #6 12

VENTILATORGreat for routing cables.

16101, 16131,16201, 16231

16141, 16151

CABLE OUTLETWatertight chrome plated brass. Threaded cap and rubbergasket. For complete waterproofing of cable.Use #6 screws.

Item # Size Color Case16161 17/16" x 111/16" White 12 (Pr.)16171 2" x 23/8" White 12 (Pr.)

16181 17/16" x 111/16" Black 12 (Pr.)16191 2" x 23/8" Black 12 (Pr.)

MOLDED CLAM SHELLUV and weather resistant andgreat for routing cables, wire, etc.

1618116161

19811 19821

Item # Description Model # Case19811 Connector w/ Adapter PL259 & UG175 1219821 VHF Male Connector PL259 1219831 Adapter for RG58U Cable UG175 1219841 Adapter for RG59U Cable UG176 1219851 Double Connector PL258 12

VHF ANTENNA CONNECTORS

Chrome Plated Brass

VHF CONNECTOR WITH ADAPTER19811: PL259 (19821) with UG175 (19831) cable adapter.

Use with RG58U cable.

COAXIAL CABLE PLUG - PL25919821: Use with RG58U or 8X cable.

Takes adapter plug UG175 (19831) or UG176 (19841).

COAXIAL CABLE ADAPTERS Both fit cable plug 19821 (PL259).19831: Use with RG58U cable - UG175.19841: Use with RG59U cable - UG176.

DOUBLE FEMALE CONNECTOR - PL25819851: Attaches to PL259 (19821) cable plug.

19831/19841

19851

Item # Size Case19781 5' Cable w/ Fittings 1219761 10' Cable w/ Fittings 1219771 20' Cable w/ Fittings 12

COAXIAL ANTENNA CABLE ASSEMBLYRG58U white coaxial cable with PL259 fittings on bothends. Lengths to fit most applications.

PLUMBING24

Item # GPM Size Case19151 8 24" L x 11/2" Dia. 5

HANDY BILGE PUMPSelf-Priming and Easy to Clean• Made of rust and corrosion resistant plastic• Packed in poly bag with rigid header card

Item # Volts Amps Case19421 12 15 12

AUTOMATIC BILGE PUMP SWITCHElectro-Magnetic• Non-clogging switch• False start protection• Universal mounting bracket• 6' long tin coated 16 gauge wire leads• Switch turns pump on at

21/4" of water, off at 3/4"• Fully warranted for 36 months• 100% Factory Tested• NMMA, ABYC and Coast Guard certified

Item # Description Volts Amps Size Case19371 Toggle switch

w/bilge pump faceplate

12 20 Stem: 11/16" L Diameter: 15/32"

12

19381 Rocker switch 12 15 1" x 111/16"Cut-out size:27/32" x 129/64"

12

BILGE PUMP SWITCHIdeal for bilge pumpapplications3 Position: On - Off - Mom. On 3Blade type terminals.Single pole. Water resistantplastic housing.

19371

19381

Item # Size Fuse Case19391 31/2" L x 2" W 2.5A 24

BILGE PUMP CONTROL SWITCHLighted stainless steel 3-way bilge pump switch. Whenusing the Momentary-On switch, bilge pump can beoperated bypassing the automatic float switch - switchautomatically returns to "OFF" when released. Can be usedwith any 12V bilge pump. Screws are also included.

Item # Description Max Hull Thickness Thru Hull Case19441 3/4" Black 3/4" Model 18051 619451 11/8" Black 11/8" Model 18091 6

BILGE PUMP INSTALLATION KITKit Contains:• 6' corrugated hose• (2) #10 stainless steel hose clamps• White thru-hull included

Item # GPH Fuse Amps Case19261 450 3A 1.5 12

MINI BILGE PUMPIdeal for pumping water out of smallareas such as small boats, jet boatsor PWC’s. Constructed of white ABSplastic with an easy to clean twistoff strainer. 3/4" outlet.3" W x 4" H.

Item # GPH Volts Amps Fuse Ports Case19211 600 12 3 4A 3/4" 1219221 800 12 3.8 4A 3/4" 1219231 1100 12 4.1 6A 11/8" 12

UNIVERSAL SERIES BILGE PUMPSnaps directly into many other strainer bases!• Submersible• Marine grade tinned wires• 43/8" high• Meets ABYC and USCG standards• Bilge pump snaps into Rule bases. Strainer base connects

to most Attwood, Mayfair, West Marine and Johnson bases• Two year warranty

Item # GPH Volts DC Amps Fuse Ports Case19271 600 12 3.5 5A 3/4" 1219281 1000 12 5.5 7A 11/8" 1219291 1500 12 8.0 10A 11/8" 1219301 2000 12 12.0 15A 11/8" 12

BILGE PUMPRugged white ABS plastic construction.304 stainless steel fasteners. 600 and1000 packed in double blisters. 1500and 2000 packed in printed box. Notrecommended for commercial use.Meets NMMA certification requirements.

19291 19301

Item # GPH Volts Amps Fuse Hose Case19341 600 12 2A 5 3/4" 619351 1100 12 4A 5 11/8" 6

AUTOMATIC BILGE PUMP

Removable housing for easy cleaning. • Fully submersible• Anti-airlock protection• Ignition protected• Marine-grade wiring• Two Year Limited Warranty• Meets ABYC and USCG standards

19341

PLUMBING 25

Item # GPH Volts Amps Fuse Ports Case19321 3700 12 15 20A 11/2" 6

SUBMERSIBLE BILGE PUMP - 3700 GPH

Removable housing for easy cleaning. • Fully submersible• Anti-airlock protection• Ignition protected• Marine-grade wiring• Two Year Limited Warranty• Meets ABYC and USCG standards

Item # GPH Volts Amps Fuse Hose Case19241 500 12 2.5 5A 3/4" 1219011 750 12 3 5A 3/4" 12

Replacement Motor Cartridge19251 500 12 2.5 5A - 1219021 750 12 3 5A - 12

This salt water tough easy to clean pump hasa water cooled motor and conforms toISO8849. CE Rated. Lip Seal Construction.30" of 16 Ga, Tinned Wire.19251: Also replaces Johnson 2855219021: Also replaces Johnson 28572

SUBMERSIBLE BILGE PUMP

Item # GPH Volts Amps Fuse Hose Case19201 500 12 2.5 5A 3/4" 1219001 750 12 3 5A 3/4" 12

Replacement Motor Cartridge19251 500 12 2.5 5A - 1219021 750 12 3 5A - 12

This salt water tough easy to clean pumphas a water cooled motor and conformsto ISO8849. Rolling ball mechanismactivates your bilge pump. Prewired forautomatic operation with manual override.CE Rated. Lip Seal Construction.30" of 16 Ga, Tinned Wire.19251: Also replaces Johnson 2855219021: Also replaces Johnson 28572

BILGE PUMP AND FLOAT SWITCH

Item # Volts Amps Case19401 36 15 12

UNIVERSAL SERIES FLOAT SWITCHActivates pump automatically. For use with all DC bilgepumps. Ignition protected. Marine grade tinned wires. 2year warranty.

Item # Volts Amps Size Case19411 12 15 41/2" x 3" x 21/2" 10

AUTOMATIC FLOAT SWITCH• Converts virtually any bilge pump to automatic operation• Made of noncorrosive ABS material• Ball activation

Item # Volt Amp Case19431 6-32 r15 12

AUTOMATIC FLOAT SWITCH• Auto switch for bilge pump and high water

alarm systems• High impact case protects float and prevents failures

due to debris lodging on top or under float• Mercury switch potted in a urethane foam float will

never waterlog• Full 5 year warranty• Warning: Product contains mercury and may not be

available for shipping in all areas

Item # GPM Case17871 2.9 @ psi 41 617881 3.5 @ psi 41 6

WATER PRESSURE SYSTEM• 12 V DC• Quiet operation• Smooth flowing• Self priming• Integrated pressure switch turns pump

on and off automatically when spray nozzle isopened and closed

• Can be run dry without damage• Low power consumption• Quick disconnect fittings• Warranty 3 yearsConnection:3/8" BSP, 1/2" hose and, 1/2" BSP, 3/4" hose or US 3/8" NPT, 1/2" hose andUS 1/2" NPT, 3/4" hose. US 1/2" – 14 NPS


WASH DOWN SYSTEMPump: 120 W. 12 V DC with built in thermal protection.Max suction: 8.2'. Nylon body. Connection: 3/8" BSP, 1/2"hose. US 1/2" NPT, 3/4" hose, 3/4" GHT.System Features:

• Spray nozzle and inlet strainer included• Quiet operation• Smooth flowing• Self-priming• Integrated pressure switch turns pump on

and off automatically when spray nozzle isopened and closed

• Can be run dry without damage• Low power consumption• Quick disconnect fittings• Warranty 3 years

PLUMBING26


WASH DOWN PUMP KIT

Pump: 3.5 GPM, 120 W. 12 V DC with built in thermal protection. Max suction: 8.2'.Nylon body. Connection: 3/8" BSP, 1/2" hose. US 1/2" NPT, 3/4" hose, 3/4" GHT. Kit Includes:• 25' coiled hose 1/2" I.D• Bulk head fitting with valve• PUMProtector™ inlet strainer• Spray nozzle with check valve• 2-way panel switches

Item # GPM Volts Case17891 10 GPM at 6.7 ft. 12 1

MACERATOR PUMPThe perfect disposer for the lavatory unit inboats and recreational vehicles— it takescare of toilet waste. A rotary cutter shredswaste before it is pumped out through thedischarge hose. The pump can be connecteddirectly to the bowl discharge outlet orholding tank.Connection: Inlet: 11/2" hose, 11/2" BSP thread,11/2"-11-1/2" NPTF, Outlet: 1" hose

Item # GPH Outlet Thread Case19461 600 3/4" 4" x 3/4" 12

LIVEWELL-BAITWELL PUMP• Ignition protected• Quiet running• Marine grade tinned wires• No burn out when run dry• Both straight and angled fittings Included• Two year limited warranty• 12VDC

Item # GPH Outlet Case19481 360 3/4" 4

12V AERATION/PUMP SYSTEM

Convert any ice chest or bait bucket into a livewell.• Use to fill or empty livewell• Use as a wash-down system• Use as a bilge pump• Two year limited warranty

Item # Hose FlangeMax HullThickness Case

18431 5/8" 17/8" 13/8" 618441 3/4" 17/8" 13/8" 618451 1" 17/8" 13/8" 618461 11/8" 17/8" 13/8" 618471 11/4" 23/8" 13/8" 618481 11/2" 23/8" 13/8" 618491 2" 31/4" 15/8" 6

STAINLESS STEEL COVERED THRU-HULL Molded from polypropylene with glass fiber for strength.Not recommended for use below the waterline.

Item # Hose FlangeMaxHull Thickness Case

White18011 1/2" 11/2" 11/4" 1218030 5/8" 15/8" 11/4" 24 (Bulk)18031 5/8" 15/8" 11/4" 1218050 3/4" 11/2" 11/4" 24 (Bulk)18051 3/4" 11/2" 11/4" 1218071 1" 17/8" 11/4" 1018090 11/8" 17/8" 11/4" 24 (Bulk)18091 11/8" 17/8" 11/4" 1218111 11/2" 27/8" 11/4" 12

Black18151 3/4" 11/2" 11/4" 1218171 11/8" 17/8" 11/4" 10

THRU-HULL CONNECTOR WITH BROAD FLANGEMolded plastic with broadflange. Per ABYC “SafetyStandards for Small Craft". Not recommended for use belowthe waterline.

18091 18151

Item # Hose Case17941 3/4" 1217961 11/8" 12

THRU-HULL CONNECTORChrome Plated Molded PlasticUse in place of stainless steel thru-hulls. Notrecommended for use below the waterline.


18161 3/4" 13/4" 21/2" 1218181 11/8" 17/8" 33/8" 10

THRU-HULL CONNECTORExtra LongMolded high impact white plastic with broad flange. Designed forinstallation where thick transoms or side walls require upto 21/2" long thread. Not recommended for use below the waterline.

PLUMBING 27


18061 3/4" 15/8" 7/8" 1218101 11/8" 23/8" 7/8" 12

90° THRU-HULL CONNECTORTwo Nut ApplicationHigh impact white plastic. Designed for places wherehose is difficult to route. Great for livewells on bass boats.Not recommended for use below the waterline.


18131 3/4" 11/2" 3/4" 1218141 11/8" 17/8" 11/8" 1218121 11/2" 27/8" 13/8" 12

90° THRU-HULL CONNECTOROne Nut ApplicationDesigned for use with one back nut, unlike old style90° thru-hull with both front and back nut. Made ofhi-impact white plastic. Designed for easier applicationwhere hose is difficult to route. Not recommended foruse below the waterline.


18531 5/8" 17/8" 13/8" 618541 3/4" 17/8" 13/8" 618551 1" 17/8" 13/8" 618561 11/8" 17/8" 13/8" 618571 11/4" 23/8" 13/8" 618581 11/2" 23/8" 13/8" 6

STAINLESS STEEL COVERED 90° THRU-HULLMolded from polypropylene with glass fiber for strength.Not recommended for use below the waterline.

Item # HoseMax HullThickness Case

18201 3/4" x 3/4" 11/4" 10

THRU-HULL CONNECTORDouble EndedDesigned to provide watertight transitionthrough tanks or bulk heads.Hose ID 3/4". Length: 43/4".

Item # Description Hose Case18211 90° Elbow 3/4" 1218221 90° Elbow 11/8" 1218241 Tee 3/4" 1218251 Tee 11/8" 12

ELBOW & TEECan be used for plumbing oraerator systems. Made of whitehigh impact plastic forcorrosion resistance.

1821118241

“Y” FITTING3 Way “Y” fitting. Great for plumbing hard-to-reach areas.

Item # Size Case91051 1/2" x 520" 12

THREADED PIPE TAPEIdeal for sealing threaded joints. Resists most acids andsolvents. 3 mil. thick.

Item # Size Case18261 27/8" dia. 12

SCUPPER VALVEHigh impact fiberglass reinforced white plastic ring withrubber flap and gasket. For boats with self bailing cockpits.Mounts on transom above water line. Fastens with #6 screws.

Item # Size Color Fastener Case18271 Small - Fits 3/4"-1-1/2" openings Clear 4 #8 1218281 Large - Fits 11/2" - 3" openings Clear 6 #10 1218291 Small - Fits 3/4"-1-1/2" openings Black 4 #8 12

SELF BAILING SCUPPER

Automatically seals and drains self bailing decks. Made of polycarbonate material.Solid polyethylene ball and PVC seal mounts on transom above water line. 18271and 18291 designed to retrofit Model 18261.

18271 18281 18291

Item # Fits Card Case18931 3/8" 2 12 (Pr.)18941 1/2" 2 12 (Pr.)18951 5/8" 2 12 (Pr.)18961 3/4" 2 12 (Pr.)

DECK AND BAITWELL PLUGFor use in livewells or baitwells. Stainless steel top andbottom plate. Brass cam. Neoprene body.

HoseItem # Case18231 3/4" 12

18891

18901

18820 18821, 18871

GENERAL ACCESSORIES28

Item # Material Fits Type Case18891 Stainless Steel 1" Twist-Turn 1218800 Brass 1" Twist-Turn 50 (Bulk)18801 Brass 1" Twist-Turn 1218861 Brass 11/4" Twist-Turn 12

18901 Stainless Steel 1" Snap-Lock 1218820 Brass 1" Snap-Lock 50 (Bulk)18821 Brass 1" Snap-Lock 1218871 Brass 11/4" Snap-Lock 12

DRAIN PLUG

Rugged construction for durability. Mount from inside transom. Bulk itemscome in reusable bucket.

Twist-Turn Plugs: Fully adjustable, will not leak or jar loose.Snap-Lock Plugs: Cam-action provides easy installation. Will not jar loose.

Item # Description Case18641 Drain Plug 12

Replacement Parts18651 Plug and Gasket 12

DRAIN PLUGBlack Nylon• 1" hole diameter• Use #10 screws

18641 18651

Item # Case18781 12

DRAIN PLUGBlack NylonScrew type drain plug features an “O” ring for positivesealing. Fine threads maintain sealing under high vibrationconditions. Mounts in a 1" diameter hole and mounts withtwo #8 screws. Mounting flange: 11/2" x 2". Ideal for boattransoms, fish wells, ice chests. Plug is attached.

Item # Size Case18661 7/8" Dia. 12

GARBOARD DRAIN PLUG316 Stainless SteelThreaded removable plug. Retention system keeps plugfrom getting lost. High polished 316 stainless steelreduces corrosion. Guaranteed for life.

Item # Description Case18750 Drain & Plug 12 (Bulk)18751 Drain & Plug 12

Replacement Parts18760 Plug 12 (Bulk)18761 Plug 12

GARBOARD DRAIN PLUG• Cast bronze flange• Brass plug• 2" OD• Fits 1/2" pipe• Mounts with #8 screws

Item # Description Case18711 Stainless Steel 1218731 Chrome Plated Brass 12

Replacement Parts18721 Plug, Stainless Steel 1218741 Plug, Chrome Plated Brass 12

GARBOARD DRAIN PLUG• 2" OD• Fits 1/2" pipe• Mounts with #8 screws

Item # Fits Case19121 1" Opening 12

SPLASHWELL DRAIN TUBEDurable plastic drain tube for motorwell, livewell orbaitwell. Fits 1" opening. Adjusts to fit bulkheads from 3/4"to 21/2". Flange OD 11/4". Use 3/4" baitwell plug to closeopening (18961).

Item # Fits Case19131 11/4" Opening 12

SPLASHWELL DRAIN TUBEDurable plastic drain tube for motorwell, livewell orbaitwell. Fits 11/4" opening. Adjusts to fit bulkheads from2" to 41/2". Flange OD 11/2". Use 1" drain plug to closeopening (18801, 18821, 18891 or 18901).

Item # Pipe Flange Case19051 1" ID 17/8" 1219071 1" ID 3" 1219111 1" ID 6" 1219091 11/4" ID 3" 12

DRAIN TUBEDrain tube with .035" wall. For use in transom,motorwell, livewell or baitwell.

Item # Description Color Case79341 Non-corrosive White 6

GENERAL ACCESSORIES 29

Item # Description Color Case79321 Non-corrosive White 6

COCKPIT ORGANIZERLarge Super Suction™ cups. Mounts on any smoothsurface. Can be permanently attached with screws. Holdsfishing gear, binoculars and other items.

GPS/CELL PHONE CADDYLarge Super Suction™ cups. Mount vertically or on any flat,smooth surface. Can be permanently attached with screws.

Item # Size Case78191 Flag: 12" x 18". Socket: 3/4" 8

MARINE U.S. FLAG KITKit Contains:• Print dyed nylon U.S. Flag (78201)• Chrome plated brass 3/4" flag pole socket (70701)• Varnished mahogany 18" flag pole (77021)

Item # Size Case78211 12" x 18" 12

DELUXE SEWN AMERICAN FLAG• 100% Nylon• Reinforced headings• Double stitching for extra durability• Brass grommets

Item # Type Description Size Case78201 United States Print-dyed nylon body, canvas header and brass grommets 12" x 18" 1278221 Canada Print-dyed nylon body, canvas header and brass grommets 12" x 18" 1278241 Bahamas Courtesy Print-dyed nylon, heavy white canvas heading and brass grommets 12" x 18" 1278251 Jolly Roger Print-dyed nylon body, canvas header and brass grommets 12" x 18" 1278261 Solid Yellow Print-dyed nylon, heavy white canvas heading and brass grommets 12" x 18" 1278271 Mexico Print-dyed nylon body, canvas header and brass grommets 12" x 18" 1278281 Puerto Rico Print-dyed nylon body, canvas header and brass grommets 12" x 18" 1278291 Cuba Print-dyed nylon body, canvas header and brass grommets 12" x 18" 12

FLAGS

Print dyed nylon. Canvas header.

78201 78221

78241 78251 78261 78271 78281 78291

Item # Size Length Color Case78301 12" x 18" 24" Orange 12

SKI FLAG• Heavy duty nylon construction• Contains suction cup and plastic pole

Item # Size Case78231 20" x 24" 12

DIVER DOWN FLAGMade of vinyl with stiffener. Poly bagged.

Item # Size Case78341 3' x 3' 12

DISTRESS SIGNAL S.O.S. FLAGUSCG Approved Orange FlagBlack circle and square printed on international orangeflag. Reinforced grommets on each corner. Four pieces ofline included for hold downs.

Item # Description Case78351 Halyard/Lines 12 (Pr.)78361 Antenna 12 (Pr.)

FLAG CLIPMade of 304 stainless steel.Spring loaded for easyinstallation. Keeps flagsflying even at low speed.Attaches to halyards,antennas or outrigger lines.

7835178361


Item # Fits Length Case77001 7/8" rail 153/16" 12

RAIL CLAMP FLAG STAFFStainless Steel

Item # ID Length Case77021 3/4" 18" 12

FLAG POLE• Varnished mahogany pole• Complete with two brass screw hooks

Item # Fits Case70701 77021 Flag Pole 12

FLAG POLE SOCKET• Chrome plated brass• 3/4" Hole Size• 2" Flange • Fasten with #8 screws

Item # Case79861 3

76 PIECE DELUXE TOOL KITMade of forged chrome vanadium steelfor durability. This kit is a must forevery boatsman. Contents are securedin place in an attache style toughmolded carrying case.

Kit Contains:(8) Combination Wrenches, 5/16" - 3/4"(2) Screwdrivers: 11/2" (Phillips/Slotted)(2) Screwdrivers: 4" (Phillips/Slotted)(1) Screwdriver 8" (Slotted)(1) Circuit Tester(1) 9" Crimping Tool(30) Terminals(1) 91/2" Water Pump Pliers(1) 10" Extension Bar(1) 10" Sliding Bar(6) Allen Wrenches(1) Battery Cleaning Brush(1) 5" Extension Bar(1) 10" Locking pliers(1) 1/2" Drive Ratchet Handle, 10''(1) Hammer(1) 1/2" Drive Spark Plug Socket(1) 1/2" Drive Universal Joint(1) Gapping Tool(13) 1/2" Drive Sockets, 5/16" - 15/16"(1) Carrying Case

Item # Description Case60011 Stainless steel 5

DELUXE FASTENER KITStainless SteelIdeal for every boater. Contains 168 of the mostcommonly used repair and replacement fasteners.

Kit Contains:(8) Phil. Oval Self-Tap 6 x 3/4(8) Phil. Oval Self-Tap 8 x 1(12) Phil. Pan Self-Tap 8 x 3/4(8) Phil. Flat Self-Tap 6 x 3/4(8) Phil. Flat Self-Tap 8 x 1(8) Phil. Oval Machine 8 - 32 x 3/4(8) Phil. Oval Machine 10 - 24 x 1(8) Phil. Flat Machine 6 - 32 x 3/4(8) Phil. Flat Machine 8 - 32 x 1(8) Sl. Oval Wood 4 x 1/2(8) Sl. Oval Wood 8 x 1(8) Hex Nut 6 - 32(12) Hex Nut 8 - 32(8) Hex Nut 10 - 24(12) Finish Washer #6(28) Finish Washer #8(8) Finish Washer #10

Item # Color Case78081 Red 1278091 Green 12

FLOATING KEY BUOYWatertight. Floating key buoyused to store small items suchas registration, money, etc.Distinctive color top snaps apart.

78091

Item # Fits Case36381 7/8" Rail 12 (Pr.)

Poly clip with stainless steel spring. Hundreds of uses.Including drying clothes, towels, hanging signs, etc.

Item # Material Length Color Case71401 Nylon 60" White 12

Fits over bunks, corners and otherout of the way places. A must foritems that need ventilation.

Item # Size Case71411 11/4" x 11/4" 12 (Pr.)

STAINLESS STEEL UTILITY HOOKCorrosion resistant, light duty stainless steel lashinghooks for items requiring wall hanging. Ideal forhammocks. Fasten with #8 pan head screws.

78081

UNIVERSAL CLIP

GEAR HAMMOCK

GENERAL ACCESSORIES 31

Item # Size Description Case37201 11/4" Single lock 1237211 11/2" Single lock 1237231 2" Single lock 12

Item # Size Description Pack Case37301 11/4" Keyed alike 3 1237311 11/2" Keyed alike 3 1237331 2" Keyed alike 3 12

PADLOCKSolid brass body and hasp with 2 nickel plated brasskeys. Packaged three keyed alike locks.

Item # Size Color Case79691 1/2" Dia. x 25' L White 3

COILED WASHDOWN HOSE WITH SPRAYERWhite poly hose is UV and chemicalresistant and has brass hose fittings.

Item # Description Case79601 Plastic w/stainless steel return spring 1279631 Brass w/adjustable spray locking lever 12

HOSE NOZZLE• 51/2" hose nozzle• Fully adjustable spray with

locking lever• Threaded front• Contour handle

79601 79631

Item # Description Case79671 “Y” Double Hose 10

SHUT-OFF CONNECTORNon corrosive plastic. Dual shut-off valves with heavyduty handles and ball valves.Not recommended for hot water.

Item # Description Size Case79641 Hose Mender 5/8" to 3/4" 1279651 Female Hose Coupling 5/8" to 3/4" 1279661 Male Hose Coupling 5/8" to 3/4" 12

HOSE MENDER & COUPLING

Non-corrosive indestructible black nylon. Fits rubber or plastic hoses 5/8" to 3/4".79641 79651 79661

Item # Size Case78180 18" H x 27" W 12

“WELCOME ABOARD” MATNavy with white lettering. Heavyolefin backing. Constructed to standup to the elements.

Item # Color Size Case79401 Blue 41/8" dia. 12

WINDPROOF ASHTRAYNon corrosive stainless steel non-slip bean bag ashtraywith attractive nautical design.

Item # Size Case32681 11/2" W x 3" H 12

Manufactured of 304 polishedstainless steel, stamped and formed.#8 screws included.

Item # Color Case79411 Chrome Plated 1279451 White 1279461 Black 12

DRINK HOLDER

Folding & AdjustableMade of fiberglass reinforced nylon with stainless steel springs and nickel platedbrass rivets. Adjustable arms hold cans, glasses, insulated drink holders and bottles.Folds up neatly when not in use.

79411 79451 79461

Item # Color Case79471 Chrome Plated Brass 12

DRINK HOLDERBeverage holder with foam thermalinsulator and two mounting brackets.Swings freely to prevent spills and iseasily detachable. Fasten with #8 screws(supplied). Packed in attractive display.Cup not included.

BOTTLE OPENER

79391, 79371 Blue LED - 79371(above view)


Item # Color Size Hole Case79481 Black 35/16" OD x 3" D 3" 1279441 White 35/16" OD x 3" D 3" 12

79430 Black 45/16" OD x 41/4" D 41/4" 12 (Bulk)79490 White 45/16" OD x 41/4" D 41/4" 12 (Bulk)

PLASTIC DRINK HOLDER

Recessed79430, 79490:3/8" hose fitting.Drain hole on bottom.

Recessed• 3 LEDs (12V)• Includes 1/4" drain

Red LED - 79391(above view)

Item # Color Size Hole Case79420 Stainless Steel 43/8" OD x 33/4" D 33/4" 12 (Bulk)

STAINLESS STEEL DRINK HOLDERRecessed

Includes 3/8" drain.


DRINK HOLDERLarge Super Suction™ cups. Non-corrosive. Mounts on anysmooth surface. Can be permanently attached with screws.

Item # Fits Size Color Case76811 48 Qt. 231/4" x 133/8" x 3" White 676821 54 Qt. 221/8" x 105/8" x 3" White 676831 72 Qt. 261/4" x 151/4" x 3" White 376841 94 Qt. 311/4" x 155/8" x 3" White 376851 128 Qt. 381/4" x 171/2" x 3" White 276861 162 Qt. 40" x 17" x 31/8"

DescriptionVelcro® StrapsVelcro® StrapsSnaps StrapsSnaps StrapsSnaps StrapsSnaps Straps White 2

White UV resistantmarine grade vinyl.For use with older,snap-style, coolers.

COOLER CUSHION

Item # Description Case76991 Mounting Kit 1276971 Mounting Kit Straps (2 Pack) 12

COOLER MOUNTING KITCooler's corners stay put with straps.Prevents injury, boat and coolerdamage. Quick disconnect strapdesign. Corrosion proof. Fastens with#8 screws (not included).

Item # Material Pack Case76881 SS & Plastic 1 1276901 Plastic 2 12 (Pr.)76921 Plastic 2 12 (Pr.)

76891 SS 2 12 (Pr.)76931 Plastic 1 1276941 Plastic 1 1276951 Plastic 1 12

IGLOO REPLACEMENT PARTS

Most popular replacement parts for Igloo coolers.76901 and 76921 are sold in pairs.

Description Fits Cooler Size (Qts)76881: Latch 28, 36, 40, 48, 54, 72, 94, 128, 16276891: Hinges 28, 36, 40, 48, 54, 72, 94, 128, 16276901: Hinges 28, 36, 40, 48, 54, 72, 94, 128, 16276921: Latch set 28, 36, 40, 48, 54, 72, 94, 128, 16276931: Non-threaded drain plug 28, 36, 40, 48, 5476941: Threaded drain plug 72, 94, 128, 16276951: Handle assembly 28, 36, 40, 48, 54

7688176891 76901

76921

7693176941

76951

STAINLESS STEEL DRINK HOLDER WITH LED LIGHT


CRUISIN’ CADDYEasy to Mount OrganizerSuper Suction™ Cups. Non-corrosive.Mounts either vertically or on any flatsurface. Can be permanently attached byusing screws. Holds your beverage,personal items and even a couple of lures.

Item # Color Size Hole Case79371 Stainless Steel

w/Blue Light41/4" OD x 37/8" D 35/8" 12

79391 Stainless Steelw/Red Light

41/4" OD x 37/8" D 35/8" 12

79481 79490

Item # Color Size Hole Case79421 Stainless Steel 41/4" OD x 37/8" D 35/8" 12

STAINLESS STEEL DRINK HOLDERRecessed

Includes 1/4" drain.

SAFETY EQUIPMENT 33

Item # Letters PackBlack74131 A 1074141 B 1074151 C 1074161 D 1074171 E 1074181 F 1074191 G 1074201 H 1074211 I 1074221 J 1074231 K 1074241 L 1074251 M 1074261 N 1074271 O 1074281 P 1074291 Q 1074301 R 1074311 S 1074321 T 1074331 U 1074341 V 1074351 W 1074361 X 1074371 Y 1074381 Z 10

Black Numbers74401 0 1074411 1 1074421 2 1074431 3 1074441 4 1074451 5 1074461 6 1074471 7 1074481 8 1074491 9 10

White74511 A 1074521 B 1074531 C 1074541 D 1074551 E 1074561 F 1074571 G 1074581 H 1074591 I 1074601 J 1074611 K 1074621 L 1074631 M 1074641 N 1074651 O 1074661 P 1074671 Q 1074681 R 1074691 S 1074701 T 1074711 U 1074721 V 1074731 W 1074741 X 1074751 Y 1074761 Z 10

White Numbers74801 0 1074811 1 1074821 2 1074831 3 1074841 4 1074851 5 1074861 6 1074871 7 1074881 8 1074891 9 10

Item # Letters Pack

Solid Self-Aligning MylarBlack White

3" GOTHIC LETTERS & NUMBERS

31/4" LETTER & NUMBER KITSSolid Self-Aligning MylarEach kit contains 4 of each letter and number totaling148 pieces. Numbers and letters are pressure sensitive.Just peel off backing and press on.

Item # Description Case77501 Complete Display – Black 177901 Complete Display – White 1

3" LETTER AND NUMBER KITSolid Self-Aligning MylarEach display contains 360 pieces. 10 each ofletters A to Z. 10 each of numbers 0 thru 9.Rack and header included.

Item # Description Case77111 Black 677121 White 6

SAFETY EQUIPMENT34

Solid Self-Aligning Mylar

3" SOLID LETTERS & NUMBERS

Item # Letters PackBlack77131 A 1077141 B 1077151 C 1077161 D 1077171 E 1077181 F 1077191 G 1077201 H 1077211 I 1077221 J 1077231 K 1077241 L 1077251 M 1077261 N 1077271 O 1077281 P 1077291 Q 1077301 R 1077311 S 1077321 T 1077331 U 1077341 V 1077351 W 1077361 X 1077371 Y 1077381 Z 10

Black Numbers77401 0 1077411 1 1077421 2 1077431 3 1077441 4 1077451 5 1077461 6 1077471 7 1077481 8 1077491 9 10

White77511 A 1077521 B 1077531 C 1077541 D 1077551 E 1077561 F 1077571 G 1077581 H 1077591 I 1077601 J 1077611 K 1077621 L 1077631 M 1077641 N 1077651 O 1077661 P 1077671 Q 1077681 R 1077691 S 1077701 T 1077711 U 1077721 V 1077731 W 1077741 X 1077751 Y 1077761 Z 10

White Numbers77801 0 1077811 1 1077821 2 1077831 3 1077841 4 1077851 5 1077861 6 1077871 7 1077881 8 1077891 9 10

Item # Letters Pack

Item # Color Case78511 Blue 1

• High back canvas chair• Canvas back has a handy

storage pouch formagazines, books, etc.

• Double leg construction foradded support

• 1" anodized aluminum tubingframe, 24" H

• Varnished arm rests


FOLDING DECK CHAIR

• White UV resistantmarine vinyl

• 1" anodized aluminum tubing

• Safe with open-position locking device

• Folds for easy storage• 300 lb. Weight capacity• Use only soap and

water to clean

Item # Case78400 10 (Bulk)

SEAT SWIVEL

360° swivel. Cadmium platedframe with 12 ball bearings.Specially designed forpadded seats. Base and seathole pattern are adjustablefrom 43/4" to 53/4" on centers.

CANVAS FOLDING CHAIR

SAFETY EQUIPMENT 35

Item # Size Bag Case45411 1/2" - 2" 6 10

EMERGENCY WOOD PLUGSAssorted wood plugs are used for emergency leaks.

Item # Size Case78341 3' x 3' 12

DISTRESS SIGNAL S.O.S. FLAGUSCG Approved Orange FlagBlack circle and square printed on international orangeflag. Reinforced grommets on each corner. Four pieces ofline included for hold downs.

Item # Size Case46021 6" Dia. x 4" H 9

FOG BELLHand polished cast triple chrome plated brass. Completewith removable bracket. Fasten with #6 screws.

Item # Description Case46010 Display bucket of 100 100 (Bulk)46011 Single package 12

WHISTLEMeets USCG requirements as a signaldevice. Perfect for attachment to lifevest as a signal whistle. Lanyardincluded. 21/4" x 3/4".

46010

46011

Item # Description Case46040 Display Bucket of 50 50 (Bulk)46041 Packaged 1 Each 12

STREAMLINED SAFETY WHISTLEMeets USCG requirements as asignal device. Rugged marine whistlecolored bright orange and made ofnon-corroding, high impact plastic.Comes with lanyard.

46040

46041

Item # Size Case46031 6" L x 13/4" W 12

TRIPLEX MOTOR BOAT WHISTLEMeets USCG requirements as a signal device.International orange color with lanyard hole.Loud triple tone.

Item # Description Rating Case46311 Large w/ Metal Plunger 110 Decibels 8

Meets U.S. Coast Guardrequirements for boats up to 65'.Patent Pending.

• Eco-Friendly—no replacement cansor chemicals

• Easy to use• Not just for boating—use at

sporting events or for your auto• No shipping restrictions

PUMP BLAST AIR HORN

Item # Description Case46211 1.5 oz. Kit 1246201 1.5 oz. Refill (1) 12

Meets USCG requirements as a signal device. 1.5oz. Signal horn complete with trumpet. This horn is100% non-flammable. The trumpet is made of ahigh impact plastic.

Item # Description Case46111 8 oz. Horn kit 1246101 8 oz. Horn refill (1) 12

SIGNAL HORN KITMeets USCG as a signal device. Signal horn kit completewith trumpet. 100% non-flammable. The trumpet is made ofa high impact plastic. 120 decibels at over 3 feet.

Item # Size Case14571 3.1" H x 5.6" W x 3.6" D

Fastener on center width: 2.1"6

HIDDEN HORNMeets ABYC, NMMA specifications. Contains stainless steelcover and 2 electrical connectors(packard and 2-T quick disconnect). 12V DC

MINI-SIGNAL HORN

SAFETY EQUIPMENT36

Item # Description Size Case14501 Single, 4 amp, 105 Db 31/2" x 31/4" x 25/16" 1214521 Double, 8 amp, 108 Db 73/4" x 39/32" x 27/32" 10

COMPACT ELECTRIC HORN

Stainless steelcover. 12V DC. Foruse in extremeweather exposurelocations and limitedspace applications.Complete withmounting pad andwire harness.

Single Double

Item # Description Length Case14541 Single Trumpet 163/4", 106 Db 114561 Dual Trumpet 203/4", 109 Db 1

TRUMPET HORNAll stainless steel trumpet tube,mounting bracket and motorcover. Vibration free mountingwith rubber pad. 12V DC.Fastens with #10 screws. 14541

14561

Item # Pack Case42061 1 pr. 6 (Pr.)

SEA-BAND® WRIST BANDThe Sea-Band has been designed to end worries aboutmotion sickness caused by rough seas, bumpy air flightsand endlessly winding roads. There are no drugs, no sideeffects, only a gentle pressure on each wrist. Sold as pair.

Item # Case42021 12

BASIC FIRST AID KITWaterproof Kit Contains:(2) Ammonia Inhalants(4) Antiseptic Towelettes(35) Bandages 1" x 3"(1) First Aid Cream(1) First Aid Sheet(3) Gauze Pads 3" x 3"(4) Non-aspirin Tablets(2) PVP Iodine U.S.P. Prep Pads(1) Scissors(1) Tape, 1/2" x 90"(2) Triple Antibiotic Foil Packs

Item # Case42041 12

DELUXE FIRST AID KITWaterproof Kit Contains:(2) Ammonia Inhalants(4) Antiseptic Towelettes(35) Bandages 1" x 3"(1) Cotton 1/2 oz.(1) First Aid Book(1) First Aid Cream, 7/8 oz.(3) Gauze Pads 2" x 2"(3) Gauze Pads 2" x 3"(3) Gauze Pads 3" x 3"(4) Non-Aspirin Tablets(4) Aspirin Tablets(1) Scissors(1) Tape, 1/2" x 90"(1) Tweezers(2) Triple Antibiotic Foil Packs

Item # Length Case71050 4' to 7' (Fully Extended) 12 (Bulk)

TELESCOPING BOAT HOOK

Tubing made with 6063 aluminum for years of maintenance-free service.Hook is made of glass reinforced nylon. Features special locking camaction. Handle Diameter: 13/8"

Item # Material Size Fastener Case71011 Polished Stainless Steel 31/2" x 1" #6 12 (Pr.)

BOAT HOOK HOLDERHolds poles up to 11/2" diameter.

Item # Size Case72011 5/8" min ID x 11/4" max ID 12 (Pr.)72031 1" min ID x 13/4" max ID 12 (Pr.)

SPRING CLAMPPolished Stainless SteelFastens with #6 P.H. screws.


RUBBER STORAGE CLIPPerfect solution for storing stern lights, boat hooks, gaffs,boat mops, etc. Made of molded black rubber, these clipswill accommodate diameters of 3/4" to 1". 2 Clips perpackage.

Item # Size Color Case71090 18" - 31" Orange 671080 26" - 72" Orange 6

TELESCOPING PADDLE/HANDLE

• Lightweight• Corrosion resistant aluminum• High strength molded material

SAFETY EQUIPMENT 37

Item # Length Color Case71070 4' to 6' (Fully Extended) White 12 (Bulk)

BOAT HOOK AND PADDLE

Corrosion resistant anodized aluminum construction with a high impact plastichandle. Handle has a positive non-slip cam lock with a built-in boat hook. Easystowing and it floats!

Item # Material Case70521 Zinc Plated Steel 12 (Pr.)

CLAMP-ON OARLOCKResists rust. Shank is 1/2" x 2" and fastens securely tooars with one adjustable bolt. Inside diameter: 13/8".Packaged 2 per card.

Item # Type Case70401 Oarlock Set 12 (Pr.)70501 Horns Only 12 (Pr.)

ROWLOCK SETChrome plated zinc. Top mounted.70401 Includes:• (2) Rowlock horns: OD shank: 1/2", Shank length: 13/4"• Between horns: 13/4" Complete with locking pin• (2) Rowlock sockets • Plastic bearings• Dimensions: 27/8" x 11/8" x 11/8", ID Hole: 1/2"

Item # Size Shank Case70421 27/8" x 11/8" x 11/8" 1/2" 12 (Pr.)

OARLOCK SOCKET• Chrome plated zamak• Sold 1 pair per card

Item # Case46151 12

LIFE JACKET LIGHT STICKCoast Guard ApprovedAttaches to life jacket. 100% safe, non-toxic, non-flammable. Simply squeeze handle to break seal. Slidecover off. Lasts up to 12 hours. Never worry aboutreplacing batteries or bulbs.

Item # Case45961 12 (Pk.)

GREEN LIGHT STICKAn ideal source of light during any night time situation.They are waterproof, self-igniting(no need for matches or batteries) and will not corrode.Lasts up to 12 hours. 2 pack.

Item # Case71021 12

RING BUOY BRACKET

Polished 304 Stainless Steel• 7" L x 3/4" W• 4" opening• Fasten with #10 screws.

How to Choose the Right Life Vest

If a life jacket fits properly it will help keep your head above water. Too big, and the life jacket will ride up around your face. Toosmall, it will not be able to keep your body afloat. Life jackets designed for adults will not work for children. Try it on for size.

1) Check the manufacturer's label to ensure that the life jacket is a proper fit for your size and weight2) Make sure the jacket is properly fastened3) Hold your arms straight up over your head4) Ask a friend to grasp the tops of the arm openings and gently pull up5) Make sure there is no excess room above the openings and that the jacket does not ride up over your chin or face

For the best fit, try the life jacket in shallow water under safe and supervised conditions.A handy guide from your United States Coast Guard. 7/10.

SAFETY EQUIPMENT 38

Item # Case45001 1

"BOSUN" SAFETY KIT

Boats Up to 25 Feet• (2) Dock Lines - 3/8" x 20' • (1) Anchor Line - 3/8" x 100'• (1) Fire Extinguisher - 10BC• (4) Life Jackets

• (4) Handheld Flares, Red• (1) Signal Horn Kit• (1) Foam Cushion• (1) Coast Guard pamphlet

Item # Case45051 1

"ECONOMY" SAFETY KIT

Boats Up to 19 Feet• (2) Dock Lines - 3/8" x 15' • (1) Anchor - #7 Utility• (1) Fire Extinguisher - 5BC• (1) Signal Horn Kit• (4) Hand Held Flares, Red

• (1) Anchor Line - 3/8" x 100' • (4) Life Jackets• (1) Anchor Shackle - 1/4" • (1) Foam Cushion• (1) Coast Guard pamphlet

Item # Case45101 1

"BOATMAN" SAFETY KIT

Boats Up to 19 Feet• (2) Dock Lines - 3/8" x 20' • (1) Anchor - #7 Utility• (1) Fire Extinguisher - 5BC• (1) Anchor Chain - 1/4" x 4' Galv.

With (2) shackles 5/16"• (1) 12 Gauge Gun w/4 Red Shells

• (1) Anchor Line - 3/8" x 100' • (4) Life Jackets• (1) Signal Horn Kit• (1) Foam Cushion• (1) Coast Guard pamphlet• (1) Safety Gear Bag

Item # Case45151 1

"SPORTSMAN A" SAFETY KIT

Boats 20 to 25 Feet• (2) Dock Lines - 3/8" x 20'• (1) Anchor - #10 Utility• (1) Fire Extinguisher - 10BC• (1) Anchor Chain - 1/4" x 4' Galv.


• (1) Anchor Line - 3/8" x 150'• (4) Life Jackets• (1) Signal Horn Kit• (1) Safety Gear Bag • (1) Coast Guard pamphlet• (1) Foam Cushion

SAFETY EQUIPMENT 39

Item # Case45201 1

"SPORTSMAN B" SAFETY KIT

Boats 20 to 25 Feet• (2) Dock Lines - 1/2" x 20"• (1) Anchor - 8lb. Deluxe• (1) Fire Extinguisher - 10BC• (1) Anchor Chain - 1/4" x 4' Galv.


• (1) Anchor Line - 1/2" x 150' • (4) Life Jackets• (1) Safety Gear Bag• (1) Signal Horn Kit• (1) Foam Cushion• (1) Coast Guard pamphlet

Item # Case45251 1

"YACHTMAN A" SAFETY KIT

Boats 26 to 32 Feet• (4) Dock Lines - 1/2" x 25' • (1) Anchor - #15 Utility• (2) Fire Extinguisher - 10BC• (1) Anchor Chain - 5/16" x 5' PVC• (1) Alert Flare• (1) Anchor Line - 1/2" x 150'

• (6) Life Jackets• (2) Anchor Shackle - 3/8" • (1) Safety Gear Bag• (1) Signal Horn Kit• (1) Foam Cushion• (1) Coast Guard pamphlet

Item # Case45301 1

"YACHTMAN B" SAFETY KIT

Boats 26 to 32 Feet• (4) Dock Lines - 1/2" x 25' • (1) Anchor - 13lb. Deluxe• (2) Fire Extinguisher - 10BC• (1) Anchor Chain - 5/16" x 5' PVC• (1) Alert Flare• (1) Anchor Line - 1/2" x 150'

• (6) Life Jackets• (2) Anchor Shackle - 3/8" • (1) Safety Gear Bag• (1) Signal Horn Kit• (1) Foam Cushion• (1) Coast Guard pamphlet

Item # Case45351 1

"YACHTMAN C" SAFETY KITBoats 26 to 32 Feet• (4) Dock Lines - 1/2" x 25' • (6) Life Jackets• (2) Fire Extinguisher - 10BC• (1) Safety Gear Bag

• (1) Alert Flare• (1) Signal Horn Kit• (1) Foam Cushion• (1) Coast Guard pamphlet

Vest has a pop-uppillow for addedhead support and a1" Grab Strap forquick recovery. Thefoam filling islightweight so itdoesn't hinder achild's mobility.Made in the USA.

• Coast Guard Type: USCG Type ll• Flotation Material: Lightweight foam• Shell: 200 Denier oxford fabric• Closure: Infant: Zipper front

Infant & Child: 1" Nylon leg strapYouth: 1" Adjustable chest strap to keep vest from riding up

SAFETY EQUIPMENT 40

Item # Color Case44900 Yellow 12

FOAM SAFETY CUSHIONType IV PFD Fully U.S. Coast Guard ApprovedDesigned to be thrown to someone who hasfallen overboard. PE foam filling.

Item # Description Size Case44980 Safety Gear 26" L x 12" W x 17" H 12 (Bulk)44990 Life Jacket 20" L x 18" W x 12" H (Holds 6) 12 (Bulk)

GEAR BAGLarge capacity. Made of heavyduty nylon with red lettering.Non-corrosive zippered topclosure and carrying handles.Keeps contents dry and clean.

4498044990

Item # Size Case86010 20" L x 12" W x 10" H 2

LIFE VEST 4-PACK WITH BAG

Item # Size Weight Chest Case86040 Child 30 - 50 lbs. - 1286060 Youth 50 - 90 lbs. - 1286020 Adult 90 lbs & up 30" - 52" 1286080 Adult XL 90 lbs. & up 40" - 60" 12

Type II PFD. Fully U.S. Coast Guard ApprovedPE foam filling. Designed specifically to provideminimum buoyancy and turn unconscious personface up in calm water situations. Yellow.

Item # Size Weight Chest Case86130 Child 30 - 50 lbs. 20" - 25" 1086170 Youth 50 - 90 lbs. 24" - 29" 8

86170

Vests have an adjustable chest strap to keep vest from riding up. The foam filling islightweight so it doesn't hinder a child's mobility. Color: Yellow/Red.Made in the USA.

• Coast Guard Type: USCG Type llI• Flotation Material: Lightweight foam• Shell: 200 Denier oxford fabric• Closure: 1" Nylon. (2) belts & (1) chest strap. Child: leg strap for added safety

86130

DELUXE CHILD/YOUTH VEST

86500 86520, 8653086540

86510

Item # Size Weight Chest Case86500 Infant Less than 30 lbs. - 686510 Child 30 - 50 lbs. - 686520 Youth 50 - 90 lbs. 25" - 29" 686530 Adult Universal 90 lbs. & Up 30" - 52 686540 Adult XL 90 lbs. & Up 40" - 62" 6

GENERAL PURPOSE VEST

Provides safety and comfort for all types of water activities.

• Coast Guard Type: USCG Type lll (Infant: Type ll)• Flotation Material: Lightweight foam• Shell: 150 Denier polyester fabric• Closure: 1" Nylon webbing. Equipped with grab handle (Infant) and leg strap for

added safety (Infant & Child)

UNIVERSAL LIFE VEST

Item # Size Weight Chest Case86100 Infant Less than 30 lbs. - 1286110 Child Less than 50 lbs. - 1086120 Youth 50 - 90 lbs. 25" - 29" 6

86110 8612086100

DELUXE CHILDRENS VEST

Type II PFD, Fully U.S. Coast Guard ApprovedUV resistant marine grade vinyl carry bag.Contains (4) adult sized Universal Life Vests(Type II PFD), Model: 86020.

Vests have adjustable belts for securefit and are filled with a lightweightdurable foam that doesn't hindermobility. Adult sizes have largearmholes for greater range of motionand open-sided styling foradjustability. Made in the USA.

Coast Guard Type: USCG Type llIFlotation Material: Lightweight foamShell: 200 Denier oxford fabricClosure: 1" NylonChild: (1) belt, (1) chest strap & leg strap for added safetyYouth: (1) belt & (1) chest strapAdult: (2) belts & (1) chest strap

SAFETY EQUIPMENT 41

Item # Size Weight Chest Color Case86140 Child 30 - 50 lbs. 20" - 25" Bl/Yel 1086150 Child 30 - 50 lbs. 20" - 25" Org/Yel 10

86180 Youth 50 - 90 lbs. 25" - 29" Bl/Yel 886190 Youth 50 - 90 lbs. 25" - 29" Org/Yel 8

86220 Univ. 90 lbs. & Up 30" - 52" Bl/Yel 586230 Univ. 90 lbs. & Up 30" - 52" Org/Yel 5

86240 XL 90 lbs. & Up 40" - 60" Bl/Yel 586250 XL 90 lbs. & Up 40" - 60" Org/Yel 5

BOAT VEST

86230

86140

Item # Size Weight Color Case86300 XXS Up to 6 lbs. Yel/Blk 686310 XS 7 to 15 lbs. Yel/Blk 686320 S 15 to 20 lbs. Yel/Blk 686330 M 20 to 50 lbs. Yel/Blk 686340 L 50 to 90 lbs. Yel/Blk 686350 XL Over 90 lbs. Yel/Blk 6

DOG LIFE VEST

86300 86330 In Use

WATER SKI ACCESSORIES

Item # Size Weight Chest Case86410 S/M 90 lbs. & Up 32" to 40" 586420 L/XL 90 lbs. & Up 40" to 52" 586430 XXL/XXXXL 90 lbs. & Up 50" to 60" 5

This dual sized vest is great for skiing, boating,fishing or relaxing on the water. Lightweight, durablefoam contours to your body and doesn't hindermobility. Adjustable belts and chest strap to keep vestfrom riding up or shifting. Made in the USA.

• Coast Guard Type: USCG Type llI• Flotation Material: Lightweight foam• Shell: 200 Denier oxford fabric• Closure: 11/2" Nylon

DELUXE 4-BELT SKI VEST

Item # Length Sections Tensile Strength Case86821 75 1 2,050 lbs. 6

WATER SKI ROPEThis product is designed to tow one (1) person,maximum rider weight 225 lbs.

• Handle: EVA, 15" wide—for firm grip• Line Material / Strand: Polypropylene,

16 strand (5/16" Diameter)

Item # Length' Sections Tensile Strength Case86601 75 1 2,050 lbs. 12

DELUXE SKI ROPEColor may vary. This product is designed to tow one(1) person, maximum rider weight 225 lbs.

• Handle: Padded, 12" wide—for firm grip• Line Material / Strand: Hollow braid polypropylene,


Item # Length Sections Tensile Strength Case86811 75' 4 Color Coded

(5', 40', 10', 10', 10')2,050 lbs. 6

4-SECTION WATER SKI ROPEThis product is designed to tow one (1) person,maximum rider weight 225 lbs.



Item # Length Sections Tensile Strength Case86801 75' 5 Color Coded

(5', 55', 5', 5', 5')2,050 lbs. 6

5-SECTION WAKEBOARD ROPETrick-Handle and Float included.This product is designedto tow one (1) person, maximum rider weight 225 lbs.




TOURNAMENT SKI TOW ROPEMeets AWSA. Color may vary. This product is designed totow one (1) person, maximum rider weight 225 lbs.

• Handle: Cushion soft, 12" wide —for firm grip• Line Material / Strand: Polypropylene,


WATER SKI ACCESSORIES42


COMPETITION SKI TOW ROPEMeets AWSA. Color may vary. This product is designed totow one (1) person, maximum rider weight 225 lbs.

• Handle: One-piece molded rubber locked spliced,12" wide —for firm grip

• Line Material / Strand: Polypropylene, 16 strand (3/8" Diameter)


TOW ROPE - 1 RIDERMeets AWSA. Color may vary. This product is designed totow one (1) person, maximum rider weight 225 lbs. in aninflatable tube.

• Line Material / Strand: Polypropylene, 16 strand(3/8" Diameter), 2 looped ends.Quick connect hook to boat only.

• Connection: 6" Loop at end

Item # Length Sections Tensile Strength Case86661 60' 2 (50' & 10') 3,000 lbs. 12

TOW ROPE - 2 RIDERThis product is designed to tow two (2) riders, maximumrider weight 340 lbs.Reusable storage keeper included.

• Line Material / Strand: 16 strand (3/8" Diameter)• Connection: 6" Loop at end

Item # Length Sections Tensile Strength Case86671 60' 1 6,000 lbs. 12

HEAVY DUTY TOW ROPE - 6 RIDERWill accommodate up to 6 riders.Reusable storage keeper included.

• Line Material / Strand: 16 strand (3/4" Diameter)• Connection: 6" Loop at end

Item # Size Fits Case79501 8" W x 4" H Windshields up to 1" thick 12

UNIVERSAL BOAT MIRRORBlack durable ABS housing with aluminum mountingbracket and stainless steel hardware. 360° swivel convexback coated aluminized mirror. Mounts on decks, framesand windshields. Easily adjustable to any position. Fastenwith #10 screws (included).

Item # Size Case30101 23/8" 10

SKI TOWStainless Steel• Transom mount• Nut and washer included• 3/8" x 3" threaded legs

Item # Size Tow Capacity Case86701 3/8" x 8' 1,000 lbs. 1286721 3/8" x 12' 1,000 lbs. 12

TOW HARNESS8' or 12' usable rope tow harness. Helps improve towingand boat control. High impact plastic float pulley helpskeep tow line away from propeller. Large snap hooks forquick attachment.86721: Fits pontoon boats & boats with twin motors.

Item # Size Tow Capacity Case86711 1/4" x 8' 1,500 lbs. 12

TOW HARNESS W/WIRE CABLE8' usable cable length. Unique design molded high impactplastic float/pulley. Allows easy attachment of ski rope forbetter towing and boat control. Full 1/4" diameter vinyljacketed steel cable. Large snap hooks for quickattachment to boat.

HARDWARE 43

Item # ID OD Hole Color Case39461 4" 51/2" 43/8" White 1239471 4" 51/2" 43/8" Arctic White 12

39501 6" 8" 61/2" White 1239511 6" 8" 61/2" Arctic White 12

39561 8" 97/8" 81/2" White 1239541 8" 97/8" 81/2" Arctic White 12

39581 10" 125/8" 105/8" White 12

PRY-UP DECK PLATEEasy to clean non-skid surface. Water tight O-ring seal.Acetone resistant polypropylene. Requires #8 fasteners.

10" x 20" ID HATCH• Molded -In• Handle lever• Built-in cam action handle• #8 Fasteners required• Stainless Steel Hinge 100°

Item # ID OD Cut Out Color Case39181 73/8" x 111/8" 101/8" x 141/8" 81/8" x 117/8" White 1039201 103/8" x 201/2" 131/4" x 233/8" 111/8" x 211/8" White 10

Replacement Parts39191 Handle - - White 10

OFFSHORE HATCH• Low profile• UV stabilized• Acetone resistant polypropylene• Integrated hinge system allows 180° opening• Flush handle for easy access• #8 Fasteners required

Item # ID OD Hole Color Case39251 37/8" 55/8" 41/2" White 1239261 37/8" 55/8" 41/2" Arctic White 1239291 37/8" 55/8" 41/2" White w/Clear Insert 1239271 37/8" 55/8" 41/2" Black 12

39351 57/8" 77/8" 61/2" White 1239361 57/8" 77/8" 61/2" Arctic White 1239401 57/8" 77/8" 61/2" White w/Clear Insert 1239371 57/8" 77/8" 61/2" Black 12

39421 73/4" 97/8" 81/2" White 12

TWIST ‘N’ LOCK DECK PLATE

Cam-action watertight O-ring seal. Acetone resistant polypropylene. Easy to clean!Requires #8 fasteners.

39251 39291 39271

Item # ID OD Cut Out Color Case39121 67/8" x 107/8" 101/4" x 143/8" 81/4" x 123/8" White 1039131 67/8" x 107/8" 101/4" x 143/8" 81/4" x 123/8" White 1039141 67/8" x 107/8" 101/4" x 143/8" 81/4" x 123/8" Arctic White 10

Replacement Parts39171 Handle Clear 12

7" x 11" ID HATCH Made of Polypropylene and isacetone proof. Requires #8fasteners.

39121: Pry-out Type39131: Molded in StainlessSteel Hinge 100°39141: Molded in StainlessSteel Hinge 100°

39121 39131

Item # Type Material Cap Tether Case32011 Gas Fill w/Cap Chrome Plated Zinc Strap 1232041 Gas Fill w/Cap Chrome Plated Zamak Beaded Chain 1232061 Gas Fill with Vent (CE certified) & Cap Molded Plastic Hinged Flip Top Cap 1232091 Gas Fill w/Cap Nylon Beaded Chain 1232101 Water Fill w/Cap Nylon Beaded Chain 1232251 Gas Fill w/Cap Cast 316 Stainless Steel Safety Chain 1232261 Diesel Fill w/Cap Cast 316 Stainless Steel Safety Chain 1232271 Water Fill w/Cap Cast 316 Stainless Steel Safety Chain 1232281 Waste Fill w/Cap Cast 316 Stainless Steel Safety Chain 12

Replacement Parts32501 Cap Plastic 32011 and Perko 1313 / 1314 Series 1232521 Cap Chrome Plated Zamak 32041 1232531 Gas Cap Nylon 32091 1232551 Gas Cap Cast 316 Stainless Steel 32251, 32261, 32271, 32281 12

For Use With 11/2" Hose.

32251, 32261,32271, 32281: Precision cast hose deck fills. Mount with #10 screws.

3" Flange width.32011: Has grounding screw. Length 17/8". Overall OD 31/8".

Mount with #6 screws.32041: Cap is marked "GAS". Rubber gasket for secure fitting.

Fasten with #10 screws.32061: Tough molded plastic flip top “GAS" fill with integral tank

vent. In compliance with USCG regulations, fuel splash backgoes back down neck instead of overboard due to the integral tank ventwith flame arrestor. Hinged flip top cap makes deck plate key obsoleteand eliminates cap loss. CE certified.

32091, 32101: 11/2" fiberglass nylon deck fill. Cap is marked “GAS" or "WATER". Rubber gasket included for secure closing. Built-in tap for easy openingwithout special tools. Fasten with #10 screws.

32251, 3226132271, 32281 32011

32041

3209132101

32061

DECK FILL PLATE

32501 32531 32521 32551

Item # ID OD Cut Out Color Case39151 95/8" x 195/8 131/8" x 233/8" 111/4" x 213/8" White 1039161 95/8" x 195/8 131/8" x 233/8" 111/4" x 213/8" Arctic White 10

Replacement Parts39171 Handle - Clear 12

HARDWARE44

Item # Case32651 12

DECK PLATE KEYBlack poly carb. Will fit 11/4" and 11/2" deckplates. Overall length: 33/8".

Item # Case32671 12

DECK PLATE KEY AND TOOLNon-magnetic Stainless SteelUniversal key has many applications including bottleopener and screwdriver. Overall length: 37/8".

Item # Size Fastener Case35101 23/8" x 27/8" x 11/4" #10 12

HATCH HINGEChrome Plated BrassIncludes cotter pin.

Item # Size Fastener Case35111 35/16" x 21/8" #10 12

TAKE-APART MOTOR BOX HINGEChrome Plated Cast BrassRemovable feature allows motor box to be pulled apartfor engine access.

Item # Size Fastener Case34971 11/4" x 72" #5 1234981 11/2" x 72" #6 1234991 2" x 72" #6 12

CONTINUOUS HINGE304 Stainless Steel.040 gauge stainless steel. Drilled andcountersunk on 2" centers. Bright annealed.

Item # Type Size Fastener Case33891 Hinge 11/2" x 13/8" #8 12 (Pr.)33901 Hinge 11/2" x 11/2" #8 12 (Pr.)33911 Hinge 2" x 2" #8 12 (Pr.)33951 Hinge with Base 15/16" x 11/2" #8 12 (Pr.)34911 Hinge 15/8" x 21/2" #8 12 (Pr.)34921 Hinge 2" x 3" #8 12 (Pr.)

BUTT HINGE

2 Per card.

33891: Molded from fiberglass filled Black nylon withstainless steel pin. Very sturdy and extremely lightweight.

33901, 33911: 316 Stainless steel.33951: Polished 304 Stamped stainless steel.

Black nylon base plate. Note: Can be used without base.34911, 34921: 304 stainless steel. Fast pin type butt hinges.

33891

33901, 33911 33951 34911, 34921

Item # Size Fastener Case34141 3" x 13/8" #8 12 (Pr.)34151 27/8" x 11/2" #8 12 (Pr.)34231 3" x 11/2" #8 12 (Pr.)34241 3" x 11/2" #8 12 (Pr.)

UTILITY HINGE

2 Per card.

34141: Fiberglass filled black nylon with stainless steel pin.Very sturdy and extremely lightweight.

34151: Polished 304 stamped stainless steel. Black nylon base plate Note: Can be used without base.

34231: Chrome plated zinc.34241: Chrome plated zinc. 120° opening.

34141 34151 34231, 34241

Item # Size Fastener Case34101 11/2" x 3" #8 12 (Pr.)34111 11/2" x 4" #8 12 (Pr.)

DOOR HINGE316 Stainless SteelDrilled and counter sunk. 2 per card.

HARDWARE 45

Item # Type Short Side Size Fastener Case34351 Hinge with Base 3/4" 21/4" x 11/2" #8 12 (Pr.)34401 Hinge 3/4" 21/4" x 11/2" #8 12 (Pr.)34471 Offset with Base 3/4" 21/4" x 11/2" #8 12 (Pr.)

SHORT SIDE HINGE

2 Per card.

34351: Polished 304 stamped stainless steel. Black nylon base plate. Note: Can be used without base.

34401: Chrome plated zinc.34471: Polished 304 stamped stainless steel. Black nylon base plate.

Offset: 3/8". Note: Can be used without base.

34351 34401 34471

Item # Size Fastener Case34601 23/4" x 21/8" #4 12 (Pr.)

INSET HINGEChrome Plated BrassSemi-concealed for 3/8" inset. 2 per card.

Item # Size Fastener Case33851 4" x 11/16" #8 12 (Pr.)

STRAP HINGES WITH BASE304 Stamped Polished Stainless SteelBlack nylon base plates. Note: Can be used without base.2 per card.

Item # Size Fastener Case33821 4" x 11/8" #8 12 (Pr.)33831 6" x 11/8" #8 12 (Pr.)

STRAP HINGETriple Chrome Plated Cast BrassDrilled and countersunk.

Item # Size Fastener Case33801 4" x 1" #10 12 (Pr.)33811 6" x 11/8" #10 12 (Pr.)

STRAP HINGE316 Stainless SteelDrilled and countersunk.

Item # Size Fastener Case37021 1" x 27/8" #8 12

SAFETY HASP304 Polished Stainless Steel


SWIVEL EYE SAFETY HASP304 Polished Stainless Steel

Item # Material Size Fastener Case37091 Triple chrome plated

cast brass3" #8 12

37101 Chrome plated zinc 3", lockclearance: 11/32"

#6 12

SWIVEL EYE HASPEye swivels to act as a latch.

3709137101

Item # Size Fastener Case37051 3" L (closed) x 11/4" W #8 12

SWIVEL HASPHeavy Duty Cast 316 Stainless SteelFits padlocks with 1/4" shank or smaller.

Item # Size Plate Fastener Case37031 11/8" x 3" 15/8" x 11/8" #6 12

LOCKABLE HASP304 Electro Polished Stainless SteelSupplied with 2 keys.

Item # Material Size Fastener Case35841 Chrome Plated

Cast Brass33/4" L x 17/8" W #8 12

HATCH FASTENERAnti-Rattle

Item # Length Size Fastener Case35751 11/2" 2" #6 1235761 2" 21/2" #6 1235781 3" 31/2" #6 12

BARREL BOLTHeavy Duty, Chrome Plated Brass1" Width. 1/4" Barrel.

HARDWARE46

Item # Material Size Length Case35691 Chrome Plated Brass 21/2" x 1/4" 21/2" 1235701 Chrome Plated Bronze 37/16" x 17/16" 23/4" 1235731 Chrome Plated Bronze 45/16" x 17/16" 31/2" 12

BARREL BOLTItems 35701 and 35731 includea friction pad which eliminatesrattle, 35691 does not include afriction pad. Use fastener #6.

35691 35701, 35731

Item # Size Fastener Case36121 2" #6 1236141 3" #6 12

CABIN DOOR HOOKChrome Plated Cast Brass

Item # Size Fastener Case36161 23/8" #8 1236171 3" #8 1236181 315/16" #8 12

CABIN DOOR HOOK304 Stainless SteelProvides maximum strength and corrosion resistance.Plastic bushing in the eye prevents accidental unhookingdue to vibration and reduces most of the rattling noiseassociated with other door hooks.

Item # Size Fastener Case36211 13/4" #6 1236231 21/4" #6 12

CABIN DOOR HOOKChrome Plated Zinc

Item # Size Fastener Case35981 13/4" x 5/16" #6 1235991 115/16" x 3/8" #6 1236001 23/8" x 7/16" #6 12

FRICTION CATCHChrome Plated ZincAdjustable pressure by means of top screw.

Item # Description Fastener Case35971 Black plastic ball stud and catch #4 12 (Pr.)

DOOR CATCHHolds door firmly in placeagainst motion and vibration.Stud - 11/8" x 3/8". Catch - 13/8" x7/8. 2 per card. Includes 2 maleand 2 female pieces per card.

Item # Size Fastener Case35951 13/4" dia. #6 12

DOOR BUTTONChrome Plated ZincBlack plastic knob and phosphor bronze tension spring.


CUPBOARD BOLTChrome Plated ZincBlack plastic slide and knob.

Item # Size Fastener Case37551 23/8" x 1/2" #8 12 (Pr.)

90° ANGLE BRACKETStainless Steel2 per card.

Item # Material Case37241 Chrome plated steel 12

CAM LOCKComes with complete set of installation hardware. 11/8"L.Includes 2 keys.

Item # Case35511 12

LOCKING LIFTING RINGStainless SteelRequires 3/4" hole to insert lock. To lock, just turn key tolocked position. Face plate: 17/8" x 21/8" x 1" deep.

Item # Case35521 12

SLAM LATCHCorrosive resistant 2" diameter accommodates materialthickness from 7/16" to 7/8".

HARDWARE 47

Item # Material Size Case35501 Chrome Plate Zinc 21/4" x 2" 12

FLUSH LOCKChrome Plated ZincIdeal for locking compartment doors, dock boxes, etc.Eliminates bulky padlocks. Installs in 15/8" diameter hole.For door thickness: 1/2" - 3/4". Includes 2 keys.


RING PULL304 Polished Stainless Steel

Item # Plate Fastener Material Case36601 13/4" x 13/8" #6 Chrome Plated Zinc 1236661 11/2" x 13/4" #6 Chrome Plated Cast Brass 1236681 17/8" x 21/2" #8 Chrome Plated Cast Brass 12

FLUSH RING PULL


FLUSH HATCH HANDLEStamped 304 Stainless SteelSpring loaded flush lifting handle.

Item # Material Plate Fastener Case36741 Chrome Plated Brass 3" x 21/16" #8 1236811 Chrome Plated Zinc 3" x 21/4" #8 12

FLUSH LIFTING HANDLE

36741 36811

Item # Material Shank Plate Case36691 304 polished

stainless steel2" x 3/16" dia. 11/4" dia. x 1/8" 12

HATCH COVER PULLStainless Steel With An Electro-Polished FinishEasy installation.

Item # Material Size Fastener Case37491 Black Nylon 61/2" L x 15/8" W 1/4" 12

COMBINATION HANDLE / STEP29/16" protrusion from transom.

Item # Material Size Fastener Case37501 Chrome

Plated Zinc6" L x 15/16" W x 31/2" H 1/4" 12

37511 Triple ChromePlated Cast Brass

43/4" L x 1" W x 1" H #10 12

37521 Triple ChromePlated Cast Brass

6" L x 11/2" H #10 12

TRANSOM HANDLE

37501 37511 37521

Item # Size Stud Case38341 12" (Stud Center-to-Center) x 2" H 5/16" x 17/8" 1238351 18" (Stud Center-to-Center) x 2" H 5/16" x 17/8" 1238361 24" (Stud Center-to-Center) x 2" H 5/16" x 17/8" 12

Electropolished304 Stainless Steel.

HAND RAIL WITH STUDS

Item # Size Fastener Case38301 12" 1/4" 1238311 18" 1/4" 538321 24" 1/4" 5

HAND RAILElectropolished 304Stainless SteelBuilt-in round platesand 1/4" threads forunder deck fastening.2" high overall.

Item # Material Type Angle Tube Case38231 Cast 316 Stainless Steel Forward 60° 7/8" OD 1238251 Cast 316 Stainless Steel Center 60° 7/8" OD 1238291 Cast 316 Stainless Steel Aft 60° 7/8" OD 12

HAND RAIL FITTINGS

• Polished• Corrosion resistant• Ideal for cabin top, dash, side or stern handrails• Pre-drilled for two #10 screws• Height: 11/2"

38231 38251 38291

HARDWARE48

Item # Material Angle Tube Case37751 Cast 316 Stainless Steel 30° 7/8" OD 1237771 Cast 316 Stainless Steel 45° 7/8" OD 1237791 Cast 316 Stainless Steel 60° 7/8" OD 1237811 Cast 316 Stainless Steel 90° 7/8" OD 12

37761 Chrome Plated Zamak 30° 7/8" OD 1237801 Chrome Plated Zamak 60° 7/8" OD 1237821 Chrome Plated Zamak 90° 7/8" OD 12

ROUND BASE RAIL FITTING

• Polished• 1/4" - 28 cup - point set screws included• Pre-drilled for three #10 screws• Base OD 2 - 5/8"

37751

37771 37791 37811

37761 37801 37821

Item # Material Angle Tube Case37891 Cast 316 Stainless Steel 60° 7/8" OD 1237911 Cast 316 Stainless Steel 90° 7/8" OD 12

37901 Chrome Plated Zamak 60° 7/8" OD 1237921 Chrome Plated Zamak 90° 7/8" OD 12

RECTANGULAR BASE RAIL FITTING

• Polished• 1/4" - 28 cup-point set screws included• Pre-drilled for four #10 screws• Base: 3" x 13/4"

37891

37911 37901 37921

Item # Material Angle Tube Case38051 Cast 316 Stainless Steel 60° 7/8" OD 1238111 Cast 316 Stainless Steel 90° 7/8" OD 12

38061 Chrome Plated Zamak 60° 7/8" OD 1238121 Chrome Plated Zamak 90° 7/8" OD 12

RAIL FITTING TEE

• Polished • 1/4" - 28 cup-point set screws included

38051

38111 38061 38121

Item # Material Angle Tube Fastener Case38421 Cast 316 SS 90° 7/8" OD 1/4"-28 12

BOW ELBOW• Polished• 1/4" - 28 cup - point set screw included

Item # Material Angle Tube Case38471 Cast 316 SS 5.5° 7/8" OD 12

RAIL END FITTINGEnd In• 1/4" - 28 cup - point set screw included• Pre-drilled for two #10 screws

Item # Size Case36961 17/8" L x 3/8" ID Eye 12

SWIVEL BABY SNAPChrome Plated Brass

Item # Size Length Eye Snap ID Case36881 #1 31/4" 5/8" ID 3/8" 1236891 #2 33/4" 3/4" ID 1/2" 1236901 #3 41/2" 3/4 ID 5/8" 12

SWIVEL EYE SNAPPolished Cast Brass

Item # Size Length Eye Snap ID Case36451 #0 2" 7/16" ID 1/4" 1236461 #1 27/8" 5/8" ID 3/8" 1236471 #2 31/4" 13/16" ID 1/2" 1236481 #3 37/8" 15/16" ID 5/8" 12

Item # Size Length Eye Snap ID Case36911 #0 2" 7/16" ID 1/4" 1236921 #1 27/8" 5/8" ID 3/8" 1236931 #2 31/4" 11/16" ID 5/8" 1236941 #3 37/8" 3/4" ID 11/16" 12

Item # ID Size Ring Size Case36951 1" 21/8" L 1/4" 12 (Pr.)

Item # Material Length Throat Case36491 Chrome Plated Brass 3" 5/16" 1236521 Stainless Steel 3" 3/8" 12

HARDWARE 49

Item # Size Length Eye Snap IDBreakingStrength Case

36401 #1 33/8" 5/8" ID 3/8" 400# 1236421 #2 4" 3/4" ID 1/2" 500# 1236441 #3 43/4" 3/4 ID 9/16" 800# 12

SWIVEL EYE SNAPCast Stainless Steel

SWIVEL EYE BOLT SNAP

SPRING SNAPSChrome Plated Brass

FAST EYE SNAPPolished Cast Brass

FAST EYE SNAPCast Stainless Steel

Item # Size Case36821 5/16" x 31/8" 1236831 3/8" x 4" 1236841 7/16" x 43/4" 12

SAFETY SPRING HOOKZinc Plated SteelSpring loaded interlocking safety snap. Not recommendedfor towing, overhead lifting or commercial applications.

Item # SizeBreakingStrength Max Load Case

36851 1/4" x 21/2" 1200 lbs. 240 lbs. 1236861 5/16" x 31/4" 2400 lbs. 480 lbs. 1236871 3/8" x 4" 3000 lbs. 600 lbs. 12

36850 1/4" x 21/2" 1200 lbs. 240 lbs. 10 (Bulk)36860 5/16" x 31/4" 2400 lbs. 480 lbs. 10 (Bulk)36870 3/8" x 4" 3000 lbs. 600 lbs. 10 (Bulk)

SAFETY SPRING HOOK316 Stainless SteelSpring loaded interlocking safety snap. Not recommended for towing or commercial applications.

Item # Breaking Strength Length Case37151 2300 lbs. 31/2" 12

SNAP HOOKNickel PlatedRugged and heavy-duty snap hook with spring loadedsafety snap to prevent hook from unhooking. 5/8" eye with9/16" snap ID.

Item # Size Breaking Strength Case36981 5/8" x 37/8" 7000 lbs. 12

WINCH HOOKHeavy Duty, Forged Steel, Zinc PlatedNot recommended for overhead lifting.


WINCH HOOKHeavy Duty, Forged Steel, Zinc PlatedClosure is spring loaded. 5/8" throat.

Item # Breaking Strength Size Case36551 1000 lbs. 41/4" 12

UTILITY SNAP HOOKWire Formed Zinc Plated Steel

Item # Size Maximum LoadBreakingStrength Case

43451 3/16" x 2" 450 lbs. 4,000 lbs. 1243461 1/4" x 21/4" 880 lbs. 5,000 lbs. 1243471 5/16" x 3" 1,760 lbs. 8,800 lbs. 12

CHAIN LINKFormed Stainless SteelOne per card.

7152171501

HARDWARE50

Item # Material Size Stock Fastener Card Case28801 Non-Magnetic 300 Series Stainless Steel 15/8" L x 3/8" ID Eye Stamped #10 2 12 (Pr.)28811 304 Forged Stainless Steel 17/8" L x 11/32" ID Eye 1/4" #10 4 12 (Pk.)28831 Chrome Plated Zinc 17/8" L x 3/8" ID Eye 1/4" #8 4 12 (Pk.)28841 Nickel Plated Brass Wire (Fits 11/4" Strap) 211/16" L x 11/32" x 17/32" ID Eye 1/4" #8 2 12 (Pr.)28871 White Non-Corrosive Nylon 17/8" L x 11/32" ID Eye 1/4" #8 4 12 (Pk.)28881 Black Non-Corrosive Nylon 17/8" L x 11/32" ID Eye 1/4" #8 4 12 (Pk.)

EYE STRAPS

Multitude of applications. 28841: Use as battery hold down.

28801 28811 28831 28841 28871 28881

Item # Material Size Fastener Case71011 Polished Stainless Steel 31/2" x 1" #6 12 (Pr.)

BOAT HOOK HOLDERHolds poles up to 11/2" diameter.

Item # Material Size Fastener Case71001 Fiberglass Reinforced

Black Nylon23/8" L x 9/16" W #8 12 (Pr.)

BOAT HOOK CLIP Holds poles up to 11/2" diameter.

Item # Size Case72011 5/8" min ID x 11/4" max ID 12 (Pr.)72031 1" min ID x 13/4" max ID 12 (Pr.)

SPRING CLAMPPolished Stainless SteelFastens with #6 P.H. screws.


RUBBER STORAGE CLIPPerfect solution for storing stern lights, boat hooks, gaffs,boat mops, etc. Made of molded black rubber, these clipswill accommodate diameters of 3/4" to 1". 2 Clips perpackage.

Item # Material Size Case72061 White Rubber 3/8" 12 (4 Pk.)72071 White Rubber 5/8" 12 (4 Pk.)72081 White Rubber 1" 12 (2 Pk.)

ROD AND TOOL HOLDERFlexible fishing rod and tool holder. Larger size willaccommodate boat hooks and boarding ladders.

Item # Steps Case71550 3 4 (Bulk)71560 4 4 (Bulk)

BOARDING LADDERNon-anodized aluminum 7/8"tubing. Polyethylene steps,11" hooks and support legs.Folds flat for storage.

Item # Description Case71501 O/B Poly Swim Platform, White 171521 I/O Poly Swim Platform, White 1

POLY SWIM PLATFORM

Maintenance-free. High strength polyethylene will not bleach, fade or crack. 7/8" dia.tubing is polished stainless steel. All stainless steel hardware included. 300 lb.capacity. Platform is 14" L x 18" W.

71501: One wraparound stainless steel rail.One underside bracket and support tube.

71521: Twin wraparound stainless steel rails.

HARDWARE 51

Locking Button

71181(I/O Configuration)

71181(O/B Configuration)

• Automatically locks into stowed position—to release presslocking button on lower left rung

• Fiberglass platform• Includes ladder and hardware for both outboard and

inboard/outboard applications• Telescoping• Maintenance-free high strength platform• Black plastic treads provide a secure stepping area• All stainless steel hardware included• 300 lb. Capacity• Platform: 14" L x 18" W

71241

DELUXE UNIVERSAL SWIM PLATFORMWITH SLIDE MOUNT TELESCOPING LADDER

Item # Steps Case71181 2 271191 3 2

REPLACEMENT TELESCOPING LADDERS71241 2 571251 3 5

Ladder Measurements2 Step: Length deployed: 24". Length stowed: 14.75".

Overall Width: 11.75". Step Tread: 7.25" x 1.5"3 Step: Length deployed: 35". Length stowed: 15".

Overall Width: 11.75". Step Tread: 7.25" x 1.5"

Item # Description Steps Case71351 I/O-O/B Swim Platform 2 271361 I/O-O/B Swim Platform 3 2

LADDERS71281 2 571301 3 571321 4 5

UNIVERSAL SWIM PLATFORMS WITH TOP MOUNT LADDER

• Ladder is secured with a Velcro® strap when in the stowed position• Fiberglass platform• Includes hardware for both outboard and inboard/outboard applications• Telescoping capability• Maintenance-free high strength platform• Black plastic treads provide a secure stepping area• All stainless steel hardware included• 300 lb. Capacity• Platform: 14" L x 18" W71281: Length deployed: 21.5". Length stowed: 13.5".

Overall Width: 12". Step Tread: 7.25" x 1.5"71301: Length deployed: 34.5". Length stowed: 15".

Overall Width: 12". Step Tread: 7.25" x 1.5"71321: Length deployed: 46". Length stowed: 15.5".

Overall Width: 12". Step Tread: 7.25" x 1.5"


71351(O/B Configuration) 71281

Item # Description Steps Case71201 I/O-O/B Swim Platform 2 271211 I/O-O/B Swim Platform 3 2

REPLACEMENT TELESCOPING LADDERS71261 2 571271 3 5

• Ladder is secured with a Velcro® strap when in the stowed position• Fiberglass platform• Includes ladder and hardware for both outboard and

inboard/outboard applications• Telescoping• Maintenance-free high strength platform• Black plastic treads provide a secure stepping area• All stainless steel hardware included• 300 lb. Capacity• Platform: 14" L x 18" W

Ladder Measurements2 Step: Length deployed: 23". Length stowed: 13.5".

Overall Width: 11.25". Step Tread: 7.25" x 1.5"3 Step: Length deployed: 35". Length stowed: 14".

Overall Width: 11.25". Step Tread: 7.25" x 1.5"

UNIVERSAL SWIM PLATFORMWITH UNDER MOUNT TELESCOPING LADDER

71201(O/B Configuration


Item # Steps Case71221 2 271231 3 2

TELESCOPING TRANSOM MOUNT LADDERStainless Steel• Vertical surface mount• Black plastic treads provide a secure stepping area• 300 lb. Capacity

71221: Length deployed: 23". Length stowed: 13.5".Overall Width: 13.5". Step Tread: 7.25" x 1.5"

71231: Length deployed: 31". Length stowed: 15".Overall Width: 13.5". Step Tread: 7.25" x 1.5"

Item # Description Color Length Case39001 Lip Trim White 200 ft. 139011 Lip Trim Black 200 ft. 1

39101 Q Trim White 125 ft. 139111 Q Trim Black 125 ft. 1

LIP TRIM AND Q TRIM

Trims fiberglass, metal, plywood and glass edges. Installs fast and permanentwithout the use of adhesives on flanges with a 3/4" minimum radius and with 1/2"minimum clearance from the edge. Vinyl over aluminum.

Lip Trim: Use on flanges from .090" to .190" thick.Q Trim: Use on flanges from .135" to .250" thick.

39001-39011 39011

FISHING ACCESSORIES52

Item # Color Size Case88251 White/Blue 15' Kit 188261 Black 15' Kit 1

COMPLETE OUTRIGGER KIT

Complete kit to outfit any boat. Kit Contains:• (1 Set) 15' fiberglass outrigger poles (88201 or 88211)• (1 Set) Outrigger pole holders (88761)• (1 Kit) Rigging kit (88111)

Item # Color Retracted Extended Base Case88201 White / Blue 67" 15' 11/8" 1 (Pr.)88211 Black / Gold 67" 15' 11/8" 1 (Pr.)

OUTRIGGER POLESTelescoping Fiberglass• Fiberglass 3-section poles• Quality construction• Three chrome brass guides• Epoxy finish over fiberglass• Sold in pairs

88201 88211

Item # Description Case88770 Tube Only 1 (Bulk)88780 Base Only 1 (Bulk)

Set88761 Outrigger Pole Holders 6 (Set)

OUTRIGGER POLE HOLDERStainless Steel For Fiberglass Poles OnlyHeavy duty highly polished stampedstainless steel. Supplied with black rubbermounting pads. Adjustable tube positions.Fits standard fiberglass 11/8" ID base, 15'outrigger poles. Base dimensions: 4" x 29/16".Fasten with #10 screws.

Item # Case88131 10

PREMIUM OUTRIGGER RIGGING KIT

Complete with release clips and stainless steelhardware. Rigs 1 pair of outriggers up to 22’.Kit Contains:(2) Release clip(2) Shock cord w/SS snaps & pulley(2) 100 ft. UV Protected black dacron line(2) Barrel swivels(4) Snap swivels(2) Crimps(2) SS Eye Strap(2) Balsa wood floats(2) SS Screws

Item # Case88111 10

DELUXE OUTRIGGER RIGGING KIT

For Poles up to 25 ft. Kit Contains:• (2) Professional trolling clips (88011)• (2) Professional outrigger snubbers (88051)• (2) Stainless steel eye straps (28801)• (1) 1/8" x 100' braided outrigger line (40151)

Item # Case88121 10

ULTIMATE OUTRIGGER RIGGING KIT

For poles up to 25 feet.Kit Contains:(2 Ea) Outrigger clips (88041)(2 Ea.) Professional outrigger snubbers (88051)(2 Ea.) Stainless Steel eye straps (28801)(1 Ea.) #400 Black mono line - 100' (88061)(4 Ea.) Line clamps

Item # Pack Case88041 2 12 (Pr.)

OUTRIGGER CLIPDesigned to keep rigger and fishing lines from fouling.Made of high impact nylon and has a tension adjustmentand standard release clip.

Item # Size Pack Case88011 23/4" x 13/8" 2 12 (Pr.)

OUTRIGGER TROLLING CLIPHigh impact plastic with stainless steel eyes and spring.

Item # Size Case40151 1/8" x 100' 6 (Bulk)

BRAIDED UTILITY LINESynthetic FiberExcellent all-purpose rigging rope. Strong, wear resistant,rot resistant. Great for outriggers, tie downs, etc.

89211 89271 89221 89231

FISHING ACCESSORIES 53

Item # Length Case88061 100' 10

MONO LINE#400 black mono line. Included are four line clamps.Ideal for replacing rigging lines on all outrigger poles.

Item # Dia. Pack Case88081 13/4" 2 12 (Pr.)

GLASS RINGPerfect for Outrigger SnubbersHand-made glass rings are strong and smooth, providinglong life. Sold in pairs.

Item # Length Pack Case88051 10" 2 12 (Pr.)

PRO OUTRIGGER SNUBBERPlated, non-corrosive baby eye snap with 1/4" bungee cordand glass ring. Ideal for outrigger line tension.

Item # Flange Size Flange Case89211 White 9" L x 117/32" ID 41/4" L x 31/2" W 10

89221 Stainless Steel 9" L x 117/32" ID 41/4" L x 31/2" W 1089231 Stainless Steel 9" L x 117/32" ID 41/4" L x 31/2" W 10

89250 White 91/2" L x 15/8" ID 41/4" L x 31/2" W 12 (Bulk)89251 White 91/2" L x 15/8" ID 41/4" L x 31/2" W 1089270 Black 91/2" L x 15/8" ID 41/4" L x 31/2" W 12 (Bulk)89271 Black 91/2" L x 15/8" ID 41/4" L x 31/2" W 10

ROD HOLDER PLASTIC - 30°

89211, 89250,89251: Injection molded ABS flange with heavy walled PVC tube.89271, 89270: Molded high impact plastic. Etched finish on flange. One-piece

construction. Non-corrosive. Uses (3) fasteners #12 for installation.89221: Nylon reinforced with fiberglass. Stamped 304 stainless

steel cover.89231: Nylon reinforced with fiberglass. Stamped 304 stainless

steel cover. Includes black rubber cap.

Item # Finish Size Flange Case89301 ABS Plastic/Black 91/2" L x 11/4" ID 4" L x 21/2" W 10

ROD HOLDER PLASTIC - 90° 90°. One piece injection molded ABS plastic allows easy installation.Drain hole pre-drilled in bottom.Fasteners: #12

Item # Finish Size Flange Case89121 Polished SS 9" L x 115/16" ID 417/32" L x 31/2" W 10

ROD HOLDER STAINLESS STEELStainless Steel30°. 304 Highly polished stamped stainless steel,supplied with flange gasket and vinyl rod liner withcap. Fasteners: #14 screws (3).

Item # Finish Size Flange Case89021 Polished SS 9" L x 15/8" ID 41/2" L x 31/2" W 10

ROD HOLDER STAINLESS STEEL - 30°Stainless SteelCast heavy duty 316 stainless steel mounting flange, 304stainless steel tube with white vinyl liner for rod protection.

Item # Description Size Case89311 SS tube and

mounting brackets9" L x 15/8" W 8

89321 PVC tube andPoly brackets

83/4" L x 13/4" W 6

ROD HOLDERSide MountExcellent for where a flush mountholder can not be installed.

89311 89321

Item # Size Case89391 113/4" L x 17/8" ID 12

ROD HOLDERSide MountInjection molded of poly material for strength and durability. Holes areprovided for screw mounting either individually or in multiples on a rack.Mounting spacers are permanently attached. Fasteners: 1/4".

Item # Size Fits Case89141 9" L x 13/4" ID up to 1" Dia 8

VERTICAL MOUNT FISHING ROD HOLDER304 Stainless SteelBlack liner included.


Item # Size Fits Case89151 9" L x 13/4" ID 7/8" to 1" Dia 8

CLAMP-ON FISHING ROD HOLDER 304 Stainless SteelWith black plastic liner. Can be used on vertical or horizontal rails.

Item # Material Case89181 Triple Chrome Plated Cast Brass 8

CHAIR ROD GIMBALProjects 41/4" x 31/4" H x 41/4" W flat. Bolts under chair.Fastens with 1/4" screws.

Item # Material Size Case72061 White Rubber 3/8" 12 (4 Pk.)72071 White Rubber 5/8" 12 (4 Pk.)72081 White Rubber 1" 12 (2 Pk.)

ROD AND TOOL HOLDERFlexible fishing rod and tool holder. Larger size willaccommodate boat hooks and boarding ladders.

Item # Material Size Case89501 Black ABS Plastic

w/slit closed cell foam insert21/2" x 7.5" L 6 (Pr.)

ROD STORAGE HOLDER - 3 ROD Will hold 3 fishing rods securely. Mounts horizontally orvertically. Pre-drilled mounting holes. 2 per set.

Item # Description Hole Case05421 Rear Mount 1" 12


COURTESY LIGHTWaterproofClean-looking, functional andtotally submersible light.Available in rear mount or frontmount. Allows for a wide varietyof uses in livewells, baitwells,storage lockers, rod lockers,swim platforms and stepwells.4W 12V DC.

05421

Item # Size Hole Case05451 Standard 3/8" H x 13/4" dia. 1" 1205461 Small 1/4" H x 1" dia. 5/8" 12

LED BAITWELL/COURTESY LIGHT

• Totally waterproof, can be mounted underwater

• Neoprene sealing gasket included

• Bright 3-element LED bulb 05451 05461


12V AERATION/PUMP SYSTEM

Convert any ice chest or bait bucket into a livewell.• Use to fill or empty livewell• Use as a wash-down system• Use as a bilge pump• Two year limited warranty


12V LIVE BAIT AERATOR KITAdjustable spray volume keeps bait alive longer. Includesfoam filter, side-mount bracket, battery clips and super-strong suction cups

• Easily converts any container to baitwell tank• Use in salt or fresh water• No drilling / no screws required -Easy to install• Completely portable• Two year limited warranty• 12VDC

Item # GPH Outlet Thread Case19461 600 3/4" 4" x 3/4" 12

LIVEWELL-BAITWELL PUMP• Ignition protected• Quiet running• Marine grade tinned wires• No burn out when run dry• Both straight and angled fittings Included• Two year limited warranty• 12VDC

FISHING ACCESSORIES 55

Item # Hose Case89631 11/2" ID 12

BAIT TANK PLUMBING KITKit Contains:(1) Overflow fitting with filter(1) Directional inlet(1) Drain plug

Item # Case18191 12

THRU-HULL STRAINER MOUNTFor remote mounted pumps. Designed to enable a3/4" thru-hull passage through a transom or livewell.1.5" Maximum transom thickness.

Item # Mesh Case89621 Stainless Steel 12

MESH STRAINERWire mesh strainer with 3/4"-14 female threads.Prevents trash, fish, scales, etc., from entering pumps.


• 420 Stainless steel tube and plunger• Non-slip molded handles for improved grip• Spring-loaded for ease of use• Adjustable lanyard

STAINLESS STEEL DE-HOOKER

Item # Size Case87031 4" x 1" x 1/2" (closed) 6

FOLDING PLIERSStainless SteelA compact companion designed to perform wherever youmay be. All stainless steel construction. 12 separatefunctions in one tool. Comes complete with pouch.

87021

These pliers are a must have for the fisherman.The coiled tether, clasp and holster mean theywill always be handy.• Anodized air-craft grade aluminum—light

weight, durable and corrosion resistant• Spring loaded handles keep pliers open and

ready to use• Tungsten coated blades effortlessly cut

mono, braid, fluorocarbon and light wire line• One year Limited Warranty

Item # Size Case87010 61/2" 12 (Bulk)87011 61/2" 12

Replacement Part87021 (2) Blades w/ screws 12

ANODIZED FISHING PLIERS WITH CUTTER

Holstered

SheathIncluded8712187101

Item # Size Case87101 6" 1287121 9" 12

The knife's tapered razor sharp blade is made ofGerman stainless steel, and is sturdy yet flexibleenough for delicate work. The blade features aserrated top for de-scaling and a line-cutter whichis accessible even when the knife is in its sheath.Includes a vented, easy open, locking sheath forsafe storage and easy cleaning. Lanyard ready, orhang from handle holes. The contoured whitehandle fits comfortably in the palm.

STAINLESS STEEL FILET KNIFE

SheathIncluded

8720187200

Item # Description Case87200 Display Bucket of 24 24 (Bulk)87201 Packaged 1 Each 12

The perfect size for preparing bait andperforming other boatside tasks. Thestainless steel blade features a serratedtop for de-scaling and a line-cutter whichis accessible even when the knife is in itssheath. Includes a vented, easy open,locking sheath for safe storage and easycleaning. Lanyard ready, or hang fromhandle holes. The contoured whitehandle fits comfortably in the palm.

STAINLESS STEEL BAIT KNIFE

Item # Case79301 6

12" LURE RACKLarge Super Suction™ cups. Mounts on any smoothsurface. Non-corrosive, white. Each rack holds up to 25baits plus a place for fillet knife. Can be permanentlyattached with screws.


Item # Description Case87302 Lobster Kit - Florida 687311 Landing Net 1287321 Metal Gauge 1287341 Gloves 12

Sold Separately87331 Plastic Gauge 12

Lobster Kit: Includes; Landing Net, Gauge, Gloves and Tickle Stick. The white mesh carrybag has an adjustable draw string.

Landing Net: Made of aluminum and fitted with an ergonomic handle with an elastic wristcord. The green mesh has 1” holes.

Metal Gauge: Made of aluminum with an eye hole for a ring attachment. The gauge is set andmarked at 3" for Florida lobster and 23/4" for stone crab.

Gloves: One size fits most. Designed for underwater use and feature a protective bottom grip.

Tickle Stick: Made of fiberglass and has a stainless steel split ring on one end. Sold only in kit.

Plastic Gauge: (Sold Separately) Made of durable plastic with an eye hole for a ring attachment. Thegauge is set and marked at 3" for Florida lobster. Landing Net

Gauge

Gloves

Tickle Stick

LOBSTER KIT - FLORIDA

Kit

FUEL ACCESSORIES & VENTILATION

Item # Application Case20931 Seachoice, Racor, Moeller, Yamaha,

Suzuki, SMI, Volvo Penta, Sierra, Aqua Power,and other filter heads.

12

Replacement Parts20951 Fuel/Water Separating Canister 48

OUTBOARD ENGINE FUEL/WATER SEPARATING FILTER10 Micron FilterReusable see-thru plastic bowl with drain,and 10 micron filter (20951).

Item # Application Case20921 Seachoice, Racor, Moeller, SMI,

Sierra, Aqua Power, and other filter heads.

12

Replacement Parts20951 Fuel/Water Separating Canister 48

INBOARD ENGINE FUEL/WATER SEPARATING FILTER10 Micron FilterMetal bowl with 10 micron filter (20951).

Item # Case20951 48

FUEL/WATER SEPARATING FILTER10 Micron Filter

20951: For styles with spin on drain bowls.Use with Seachoice Kits 20921 and 20931.

Replaces: Racor S3213, Sierra 7919,Mercury 809101, Moeller 03331510

Item # Description Case20901 Fuel/Water Separator Kit 1020911 Fuel/Water Separator Canister 50

FUEL/WATER SEPARATOR AND CANISTER28 Micron FilterUniversal 3/8" Ports.

20901: Fits most 2 and 4 cycle gasolineengines. Powder coated bracketincluded. Includes 2 brass plugs. Onecomplete set per box.Replaces:Seachoice 20901, Valmar 52103, Sierra78481, Moeller 03332010, Mercury 35-802893Q4, Marpac 7-0871

20911 Replaces:Seachoice 20911, Valmar 52113, Sierra 7844, Racor PFF 5510, Moeller 03332410,Mercury 35-802893Q01, Marpac 7-0860

20901 20911

Item # Description Case20941 Universal In-Line Fuel Filter 1220971 Replacement Filters (3) 12

IN-LINE FUEL FILTERIn-line style universal fuel filter replacesany 1/4", 5/16" or 3/8" filter. Protects allcarbureted engines. Clear body permitsvisual inspection.

20941

20971

Item # Barb Application Case21101 1/4" Mercury 35-16494 and 35-816296Q2 1221111 5/16" Mercury 35-816296-1, 35-16494, J/E 398327 1221121 3/8" J/E 398319 12

IN-LINE FUEL FILTERMolded White Plastic

FUEL ACCESSORIES & VENTILATION 57

Item # Case78991 12 (Pr.)

FUEL TANK HOLD DOWN KITTwo 63" poly straps with quick release buckles. Mountinghardware included.

Item # Tank Depth Case15461 6" to 12" 1215471 4" to 24" 415511 Gasket Only 12

ELECTRIC SENDING UNITMade of non-ferrous materials andcompatible with 35 to 240 ohmgauges. Mounting screws andgasket included. Float arm can berotated in 90° intervals to assureclearance with tank walls or baffles.

15461

15471

Item # Description Case15501 Fuel Gauge Kit 1215421 Fuel Sender, Adjustable 1215441 Fuel Gauge, Black Bezel 815511 Gasket Only 12

FUEL GAUGE KIT

15501: Combination of 15421 and 15441.15421: Fuel Gauge Sender: Adjustable depth from 6" to 27". Fits most tanks.

Includes gasket. Resistance value 240 ohms (empty) to 33 ohms (full).15441: Fuel Gauge: Black bezel low profile fuel gauge for 12V negative

ground systems. Use in conjunction with Model 15421 fuel sender.Complete with light kit.

15441 15501

21361 21371

21381 21391

LOW PERM FUEL LINE KIT

Meets all EPA, CARB, USCGand ABYC RequirementsIncludes: Low permeationprimer bulb, fuel line fittings,stainless steel hose clampsand 3/8" fiber-reinforced fuelline for additional strengthand kink resistance.

• High output primer bulb—60% more output per pump than leading competitors• High flow check valves ensure fast priming and low-restriction fuel flow to

your engine• Compatible with ethanol blended fuels• Engineered low permeation material prevents fuel evaporation, saving

fuel and money• Bulb engineered to maintain flexibility and prevent collapse in hot and

cold temperatures• Industry leading vertical fuel draw for priming in any application

Item # Application Size Case21361 Universal (w/o connectors) 3/8" x 6" 621371 OMC/Johnson/Evinrude 3/8" x 6" 621381 Yamaha 3/8" x 6" 621391 Mercury 3/8" x 6" 6

Item # Size Case23431 7/32" - 5/8" & 7/16" - 25/32" 12 (Cd.)23501 1/2" - 29/32" & 11/16" - 11/4" 12 (Cd.)

HOSE CLAMPStainless steel. Interlockedconstruction – no welds, no bumps.Exceeds all SAE requirements. 2 of each size per card.

Item # Fits Case21321 5/16" ID Fuel Hose 1221301 3/8" ID Fuel Hose 12

LOW PERM PRIMER BULBMeets all EPA, CARB, USCG and ABYC RequirementsHigh output primer bulb—60% more output per pumpthan leading competitors. High flow double checkvalves ensure fast priming and low-restriction fuel flowto your engine. Compatible with ethanol blended fuels.Engineered low permeation material prevents primerbulb fuel evaporation, saving fuel and money whileprotecting air quality. Engineered to maintain flexibilityand prevent collapse in extreme temperatures. Industryleading vertical fuel draw for priming in any application.Meets maximum 15 grams/m2/day permeationallowance as demonstrated through California AirResources Board test TP-512.

Item # Thread Hose Case20801 1/4" NPT 1/4" 1220811 1/4" NPT 5/16" 1220821 1/4" NPT 3/8" 12

20771 3/8" NPT 1/4" 1220781 3/8" NPT 5/16" 1220791 3/8" NPT 3/8" 12

FUEL ACCESSORIES & VENTILATION58

Item # Connector Thread Case20891 Female 1/4" NPT 12

BRASS TEE FITTING Used to withdraw fuel from a single tank for dual motorsor to withdraw fuel from dual tanks for a single motor.

MALE HOSE BARBAll brass machined fittings. Ideal forfuel fitting applications.

Item # Thread Hose Case20851 1/4" NPT 3/8" 12

20861 3/8" NPT 3/8" 1220871 3/8" NPT 5/16" 1220881 3/8" NPT 1/4" 12

90° FUEL ELBOWAll brass machined fittings. Ideal for fuel fittingapplications. Excellent for use with fuel/water separatorwhere space is limited.

Item # Thread Case20831 1/4" NPT 1220841 3/8" NPT 12

BRASS TANK VENT ELBOWDesigned for use where vertical space is limited. Replaces3/8" plug on fuel tank.

Item # Connector Fits Material Type Thread Hose Case20691 Tank Fitting - Male Chrysler/Force CP Brass Deluxe 1/4" NPT - 1220701 Hose Fitting - Female Chrysler/Force CP Brass Deluxe - 3/8" Barb 12

20481 Tank Fitting - Male Honda CP Brass Deluxe 1/4" NPT - 1220441 Hose Fitting - Female Honda Hi-Impact Nylon Deluxe - 3/8" Barb 1220461 Hose Fitting - Female Honda Brass Deluxe - 3/8" Barb 12

20561 Tank Fitting - Female Mercury/Mariner Hi-Impact Nylon Deluxe 1/4" NPT - 1220571 Hose Fitting - Female Mercury/Mariner Hi-Impact Nylon - 3/8" Barb 1220581 Hose Fitting - Male Mercury/Mariner Hi-Impact Nylon Deluxe - 3/8" Barb 1220591 Tank Fitting - Male Mercury/Mariner Hi-Impact Nylon 1/4" NPT - 1220601 Hose Fitting - Female Mercury/Mariner Hi-Impact Nylon Deluxe - 3/8" Barb 1220531 Tank Fitting - Female Mercury/Mariner Hi-Impact Nylon Deluxe - 3/8" Barb 12

20501 Tank Fitting - Male OMC (Evinrude/Johnson) Brass 1/4" NPT - 1220511 Tank Fitting - Male OMC (Evinrude/Johnson) Brass Deluxe 1/4" NPT - 1220521 Hose Fitting - Female OMC (Evinrude/Johnson) Hi-Impact Nylon Deluxe - 5/16" Barb 1220541 Hose Fitting - Female OMC (Evinrude/Johnson) Hi-Impact Nylon - 3/8" Barb 1220551 Hose Fitting - Female OMC (Evinrude/Johnson) Hi-Impact Nylon Deluxe - 3/8" Barb 12

20641 Tank Fitting - Male Yamaha/Mercury/Mariner Brass 1/4" NPT - 1220651 Tank Fitting - Male Yamaha/Mercury/Mariner Brass Deluxe 1/4" NPT - 1220621 Hose Fitting - Female Yamaha/Mercury/Mariner Hi-Impact Nylon Deluxe - 5/16" Barb 1220671 Hose Fitting - Female Yamaha/Mercury/Mariner Hi-Impact Nylon - 3/8" Barb 1220661 Hose Fitting - Female Yamaha/Mercury/Mariner Hi-Impact Nylon Deluxe - 3/8" Barb 12

FUEL CONNECTOR

Precision engineered fuel connectors.

20691 20481 20701, 20461

20441 20501 20561 20581 20601 20531

20511 20541, 206720521, 2057120661, 20621 20551 20651 20591

Item # Size Case20721 1/4" x 1/4" NPT (Male/Female Ports) 1220731 1/4" x 1/4" NPT (Female Ports) 1220741 3/8" x 3/8" NPT (Female Ports) 12

FUEL ACCESSORIES & VENTILATION 59

BRASS TWO WAY FUEL LINE VALVE

THREE WAY FUEL LINE VALVE• Female ports• Brass• Positive lock with audible click

Item # Thread Hose Case20991 1/4" NPT 3/8" ID 12

ALUMINUM ANTI-SIPHON VALVECoast Guard industry standards require anti-siphonprotection on all gasoline powered boats. This valvecombines anti-syphon protection with a convenient hosebarb design. Made of corrosion resistant aluminum.

Item # Material HoseMax HullThickness Case

23001 Nylon 5/8" 3/4" 1223011 Chrome Plate Zinc 5/8" 3/4" 12

GAS TANK VENT23001: Reinforced black nylon with stainless

steel screen flame arrestor.23011: Chrome plated zinc vent with removable

wire screen flame arrester.Meets USCG safety standards.

23001 23011

Item # Type HoseMax HullThickness Case

23031 Straight 9/16" or 5/8" 1/2" 1223041 90° 9/16" or 5/8" 1/2" 12

THRU-HULL VENTChrome Plated BrassHighly polished chrome plated brass.Two vent holes. Monel fire screen.

Straight23031

90°23041

Item # Hose Max Hull ThicknessInstallationHole Size Case

23061 5/8" ID 7/8" 13/8" 12

90° FLUSH MOUNT FUEL VENT316 Stainless SteelOn the exterior, they have a smooth edge over thecompetition. Unlike some others, there is no protrudingcap to cause damage — or be damaged by hull bumpsand scrapes. Cap unscrews with hex head wrench for easycleaning of filter and pressure testing of entire fuel system.

Item # Size Fastener Case16081 31/4" Dia. #6 (4) 12

VENTILATORStamped Stainless SteelRound stamped stainless steel vent allows ventilation toconfined areas. Will cover holes up to 21/2".

Item # Size Screws CasePOLISHED STAINLESS STEEL16141 121/32" x 13/4" x 7/16" #6 1216151 25/32" x 21/8" x 15/32" #6 1216231 33/4" x 33/4" x 17/8" #6 12

CHROME PLATED BRASS16101 19/16" x 11/2" x 15/32" #4 1216131 2" x 23/32" x 19/32" #6 1216201 33/4" x 33/4" x 17/8" #6 12

VENTILATORGreat for routing cables.

16101, 16131,16201, 16231

Item # Size Fastener Case16031 51/4" L x 57/8" W x 21/4" H #8 12

COWL VENTILATORDie cast zamak with chrome finish. Black polypropyleneflange. Pre-drilled for three screws.

Item # Size CFM Case41851 3" 170 641841 4" 240 6

IN-LINE BILGE BLOWERHousing is molded toughcorrosion-proof ABS plastic.Rugged built-in mountingbrackets for easy installation.Molded tabs on all hose flangesprovide positive hoseconnections. Ignition protected.Spark proof. Blower meets orexceeds the following standards:ABYCH H-2, NMMA Certified,USCG 33 CFR Sections 183.410and 183.425, ISO 9097, UL Listed, UL 1128 Standard Marine blowers.

41851: 3" Intake. 3" exhaust with remote bracket. 8" length.43/4" mounted height. CFM 170 air movement.Ignition protected 12V DC, 4.0A. Use 6A fuse.

41841: 4" Intake. 4" exhaust with remote bracket. 53/4" length.43/4" mounted height. CFM 240 air movement.Ignition protected 12V DC, 4.5A. Use 5A fuse.

4185141841

Item # Size Case20751 1/4" x 1/4" x 1/4" NPT 1220761 3/8" x 3/8" x 3/8" NPT 12

Item # Size Volts Amps Case71451 6" 12 3 12

6" OSCILLATING FANPlastic base with toggle switch control. 90° oscillatingmotion. Rust proof white vinyl coated fan guard.Dimensions: 91/2" overall height, 61/2" depth (front to back),7" dia. fan guard, 6" fan blade, 35/8" x 15/8" base.

16141, 16151

Long Flexible withstainless steel strainer and handle.Fabricated of light-weight polyethylene.Allows access to hard to reach openings.2-part funnel separated by twisting.

90210

Item # Size Case35861 12" 12

Item # Weight Boat Size Case41650 4.4 lbs. 18' 141660 11 lbs. 23' 141670 161/2 lbs. 30' 141680 22 lbs. 30' 141690 33 lbs. 40' 141700 44 lbs. 47' 1

FUEL ACCESSORIES & VENTILATION60


HATCH HOLDER304 Stainless SteelRecommended for hatches up to 10 lbs.

LID AND HATCH SUPPORT Stainless Steel• Molded nylon mounting ends• Supports up to 20 lbs.

ANCHORING

Item # DescriptionRACKANCHOR Rack and Sign

Replacement PartHEADERRACKSIGN Sign Only

ANCHOR RACK DISPLAY

Cost effective way of displaying anchors48" wide unit with self-selling header which drawscustomers’ attention.Display features adjustable rack and can hold between14 and 20 anchors depending on size. Note: Anchors not included. ANCHOR SELECTION CHARTUTILITY

Boat NylonItem # Size Size Rope Chain41600 5E 10' -15' 3/8" 3/16" x 4'41610 7E 15' -19' 3/8" 1/4" x 4'41620 10E 20' -24' 3/8" 1/4" x 4'41630 13E 25' -28' 3/8" 1/4" x 4'41640 15E 28' -30' 1/2" 5/16" x 5'DELUXE

Boat NylonItem # Size Size Rope Chain41710 4S 12' -16' 3/8" 3/16" x 4'41720 8S 17' -24' 3/8" 1/4" x 4'41730 13S 25' -30' 3/8" 5/16" x 5'41740 18S 31' -34' 1/2" 5/16" x 5'41750 22S 35' -38' 1/2" 5/16" x 5'

Item # Size HeightStockWidth

FlukeLength

BoatSize Case

41600 5E 113/4" 111/2" 81/2" 10'-15' 2041610 7E 141/2" 123/4" 9" 15'-19' 2041620 10E 163/4" 141/2" 91/2" 20'-24' 1441630 13E 191/2" 18" 111/4" 25'-28' 641640 15E 213/4" 18" 13" 28'-30' 6

UTILITY ANCHORQuality at an economical priceGreat holding power at a price everyone will enjoy. Hot dippedgalvanized for maximum corrosion protection. Each anchor isindividually inspected for quality and workmanship. Theeffective slip-ring design assures easy retrieval. Single piececrown construction for extra anchor strength. Firm penetrationis attained by special fluke strengthening design.

Item # Size HeightStockWidth

FlukeLength

BoatSize

Case

41710 4S 191/4" 143/4" 91/2" 12'-16' 2041720 8S 221/2" 18" 113/4" 17'-24' 841730 13S 271/8" 21" 141/2" 25'-30' 1 (Bulk)41740 18S 30" 241/4" 161/2" 31'-34' 1 (Bulk)41750 22S 343/8" 263/4" 19" 35'-38' 1 (Bulk)41760 43S 403/4" 311/2" 22" 39'-45' 1 (Bulk)

Dollar for dollar your best buy in anchorsSuperior holding power in a traditional designed anchor.Each anchor is hot dipped galvanized for maximumcorrosion protection. Individually inspected to assurequality and workmanship. Reinforced wide flukespenetrate deeply and firmly for maximum holding power.Specially engineered angles and welded crownconfiguration provide unsurpassed strength and durability.

CLAW ANCHORHot dipped galvanized for lasting corrosion protection.Designed for use in various sea beds, tides and windconditions. Stows easily on bow roller.

DELUXE ANCHOR

Item # Description Case90200 Short Rigid 12 (Bulk)90210 Long Flexible 12 (Bulk)90220 Long Flexible w/ss strainer & handle 12 (Bulk)

90200

90220

FUNNELS

ANCHORING 61

ANCHOR KIT

Kit Contains:One (1) AnchorOne (1) Anchor Lead ChainOne (1) Nylon Anchor Line

Anchor Lead Chain with Shackle: Hot Dipped Galvanized proof coil anchor lead chain 1/4" x 4' with two (2) 5/16" shackles.Nylon Anchor Line: 3/8" x 150'Anchors: Each anchor is hot dipped galvanized for maximum corrosion protection

Anchor Line Anchor Chain

Utility Deluxe

PLOW ANCHORHot dipped galvanized for lasting corrosion protection.Quick setting geometric design provides stability and highholding power. Perfect for sand, pebble, rock, grass, kelpand coral bottoms.

NAVY ANCHORAluminum Painted IronDouble-dipped painted aluminum for rust resistance. Large castrope eye. For use in gravel, stone and shale bottoms.

FOLDING GRAPNEL ANCHORMade of malleable iron, heavilygalvanized. Operates and folds upeasily to store. Lockable in openand closed position. Great for smallcraft and dinghies. 41000-Closed

41000

RIVER ANCHORVinyl coated iron anchors. Will catch and hold torough bottom. Penetrates better than regularmushroom anchors.

MUSHROOM ANCHORAluminum Painted Iron and Vinyl CoatedFor small boats and mooringbuoys. One-piece cast iron in twocoating choices: double dippedpainted aluminum for rustresistance and heavy gauge blackvinyl for hull protection. Mosteffective in sand or mud.

41200 41280

LIFT 'N' LOCK ANCHOR CONTROLZinc plated steel anchor lift and nylon pulley system. Zincplated steel sleeve controls anchor from any position.Accommodates 1/4" to 7/16" diameter rope. Supportsanchors up to 20 lbs.

Item # Type Boat Size41622 10E Utility (41620) 20'-24'41722 8S Deluxe (41720) 17'-24'41732 13S Deluxe (41730) 25'-30'

Item # Weight Anchor Size Boat Size Case41540 14 lbs. 211/4" L x 8" W 24 - 31' 141550 22 lbs. 241/2" L x 123/4" W 32 - 41' 141560 35 lbs. 283/4" L x 103/4" W 42 - 52' 141570 44 lbs. 341/4" L x 151/2" W 47 - 58' 1

Item # Weight Case41360 10 lbs. 4 (Bulk)41370 15 lbs. 4 (Bulk)41380 20 lbs. 4 (Bulk)

Item # Weight Case41050 11/2 lbs. 6 (Bulk)41000 31/2 lbs. 6 (Bulk)41010 51/2 lbs. 4 (Bulk)41020 7 lbs. 4 (Bulk)41030 9 lbs. 4 (Bulk)41040 13 lbs. 4 (Bulk)

Item # Weight Color Case41500 12 lbs. Black 441510 15 lbs. Black 441520 20 lbs. Black 241530 30 lbs. Black 2

Item # Weight Boat Size CaseBlack Vinyl Coated Iron41200 8 lbs. Up to 10' 4 (Bulk)41220 10 lbs. Up to 12' 4 (Bulk)41260 15 lbs. Up to 16' 4 (Bulk)

Aluminum Painted Iron41280 8 lbs. Up to 10' 4 (Bulk)41300 10 lbs. Up to 12' 4 (Bulk)41340 15 lbs. Up to 16' 4 (Bulk)

Item # Case41481 12

Item # Size Boat Size Case44401 3/16" x 4' 10' - 15' 1044421 1/4" x 4' 16' - 32' 1044441 5/16" x 5' 26' - 40' 6 44461 3/8" x 6' - 4

PVC COATED ANCHOR LEAD CHAINWhite PVC coated hot dipped galvanized proof coil chain.Grade G4. Oversized links on both ends.

ANCHORING62

Item # Size ShackleWorkingLoad

BreakingLoad Boat Size Case

44101 3/16" x 4' 1/4" 705 lbs. 3,000 lbs. 10' - 15' 1044121 1/4" x 4' 5/16" 1,250 lbs. 5,000 lbs. 16' - 32' 544141 5/16" x 5' 3/8" 1,875 lbs. 7,500 lbs. 26' - 40' 3

GALVANIZED ANCHOR LEAD CHAIN WITH SHACKLEHot dipped galvanized proof coil anchor lead chainsupplied with 2 hot dipped galvanized shackles. Grade 30.

Item # SizeWorkingLoad

BreakingStrength Case

44251 3/16" x 250' 705 lbs. 3,000 lbs. 144261 1/4" x 141' 1,250 lbs. 5,000 lbs. 144271 5/16" x 92' 1,875 lbs. 7,500 lbs. 144281 3/8" x 63' 2,625 lbs. 10,500 lbs. 1

PROOF COIL CHAINHot Dipped Galvanized, Grade 30Packed in 100 lb. plastic pails.

Item # Description Fastener Case33021 Hinged #8 12

ROPE DECK PIPEHand cast triple chrome plated brass. Flange diameter31/4" x 11/2" ID Accommodates rope up to 5/8".

Item #ChainSize Length

WorkingLoad

BreakingStrength

AnchorSide

ChainSide Case

44501 1/4"-5/16" 31/2" 2,500 7,500 5/8" 9/32" 644511 3/8"-1/2" 45/8" 6,000 14,000 7/8" 1/2" 644521 1/2"-3/4" 6" 14,000 22,500 13/16" 9/16" 6

ANCHOR SWIVEL316 Stainless SteelUsed between anchor and lead chain or between chain and anchor line. Prevents chain and anchor rope from getting twisted.

Item # Size Breaking Strength Max Load Case43151 3/16" 3,000 lbs. 600 lbs. 1243161 1/4" 3,000 lbs. 600 lbs. 1243171 5/16" 5,000 lbs. 1,000 lbs. 1243181 3/8" 8,000 lbs. 1,600 lbs. 1243201 1/2" 10,000 lbs. 2,000 lbs. 12

Bulk Package43160 1/4" 3,000 lbs. 600 lbs. 12 (Bulk)43170 5/16" 5,000 lbs. 1,000 lbs. 12 (Bulk)43180 3/8" 8,000 lbs. 1,600 lbs. 12 (Bulk)

STAINLESS STEEL ANCHOR SHACKLE316 Forged stainless steel. One per card.

Item # Size Max Load Breaking Strength Case43051 1/4" 1,100 lbs. 4,400 lbs. 12 (Pr.)43061 5/16" 1,650 lbs. 6,600 lbs. 12 (Pr.)43071 3/8" 2,200 lbs. 8,800 lbs. 12 (Pr.)43091 1/2" 4,400 lbs. 17,600 lbs. 12

BULK43040 3/16" 275 lbs. 1,100 lbs. 143050 1/4" 1,100 lbs. 4,400 lbs. 143060 5/16" 1,650 lbs. 6,600 lbs. 143070 3/8" 2,200 lbs. 8,800 lbs. 143080 7/16" 3,300 lbs. 13,200 lbs. 143090 1/2" 4,400 lbs. 17,600 lbs. 143110 5/8" 6,150 lbs. 20,600 lbs. 143120 3/4" 7,164 lbs. 31,800 lbs. 143130 7/8" 9,369 lbs. 39,682 lbs. 143140 1" 10,000 lbs. 44,000 lbs. 143150 11/4" 14,000 lbs. 60,000 lbs. 1

GALVANIZED ANCHOR SHACKLEWeldless, drop forged, galvanized to mil-spec. Packed 2per card except for 1/2", single packed.

Item # Size Max Load Breaking Strength Case44581 3/16" 700 lbs. 2,800 lbs. 1244591 1/4" 900 lbs. 3,900 lbs. 1244601 5/16" 1,900 lbs. 7,700 lbs. 1244611 3/8" 2,900 lbs. 11,900 lbs. 1244621 1/2" 6,100 lbs. 24,700 lbs. 12

D ANCHOR SHACKLE316 Stainless Steel.One per card.

Item # Size Max Load Breaking Strength Case44651 3/16" 700 lbs. 2,800 lbs. 1244661 1/4" 900 lbs. 3,900 lbs. 1244671 5/16" 1,900 lbs. 7,700 lbs. 1244681 3/8" 2,900 lbs. 11,900 lbs. 1244691 1/2" 6,100 lbs. 24,700 lbs. 12

TWISTED ANCHOR SHACKLE316 Stainless Steel.One per card.

3012130131

ANCHORING 63

Item # Size CaseGalvanized43331 3/8" 12 (Pr.) 43341 1/2" 1243351 5/8" 12

Galvanized - Bulk43330 3/8" 1 (Bulk)43340 1/2" 1 (Bulk)43350 5/8" 1 (Bulk)

GALVANIZED WIRE ROPE THIMBLEWire rope style thimbles. Meets federal specs.FFT- 276b type 2. 43331 at 2 per card. 43341& 43351 single packed.

Item # Case79101 12

AUTOMATIC FENDER ADJUSTERFor Use with Wooden Rails and Pipe RailsMakes placing fenders easy. Eliminates tying/untying fender lines. Instantself locking action works automatically to raise and lower the fender andhold it securely in place. White vinyl strap w/stainless steel hardware.Snaps around rails. Accommodates up to 1/2" diameter line.

Item # Size Fastener Case30061 41/4" #10 1230071 6" 1/4" 12

PULL UP CLEAT316 Cast Stainless SteelCleat recesses flush to deck. Four countersunk holesfor four fasteners (fasteners not included). Easy toinstall. Needs 31/2" below deck clearance.

Item # Size Stud Case30041 41/2" 1/4"-20 thread 630051 6" 3/8"-16 thread 6

PULL UP CLEAT WITH STUDS316 Stainless SteelStreamline design

Item # Size Eye Case30241 6" x 2" 11/8" dia. 10

LIFTING RING / CLEAT316 Stainless SteelBase diameter: 2" Height: 2". For threaded rod size5/8"-11. Maximum vertical load 4000 lbs. Fasten with#10 screws. If used for overhead lifting, Seachoicelifting adapter plate (30201) and threaded rod(30190) must be properly installed.

Item # Size Case30190 5/8"-11 x 36" L 10 (Bulk)

THREADED RODFor use with Seachoice lifting adapterplate (30201) and choice of lifting eyes(30231 & 30241). 304 Stainless steel.

Item # Eye Case30231 11/2" 10

LIFTING EYE WITHOUT CLEATStainless SteelTapped for 5/8" threaded connecting rod. Maximum verticalload 3000 lbs. If used for overhead lifting, both Seachoicelifting adapter plate (30201) and threaded rod (30190)must be properly installed.

Item # Material Fits Case30201 304 Stainless Steel 11/4" ID Eyes 12

LIFTING ADAPTER PLATEAdapter plate with 5/8" right hand threadedtapping pinion. For use with Seachoicelifting eyes (30231, 30241) when overheadlifting is required.

Item # Description Eye Flange Fastener Case30121 Lock 3/8" ID 11/2" #8 1230131 Spare Eye Only 3/8" - - 12

FENDER LOCK

Stainless SteelEye is to be permanentlyattached to fender line.2 per card.

30800 30820

Item # Size Base Fastener Case30351 47/16" L x 7/8" H 19/16" L #10 12

TIE DOWN CLEATChrome Plated Zinc

Item # Size Line Size Fastener Case30800 41/2" L Up To 5/16" 3/16" 1 (Bulk)30801 41/2" L Up To 5/16" 3/16" 1230820 6" L Up To 7/16" 1/4" 1 (Bulk)30821 6" L Up To 7/16" 1/4" 1230840 8" L Up To 5/8" 5/16" 1 (Bulk)30841 8" L Up To 5/8" 5/16" 1230860 10" L Up To 1" 5/16" 1 (Bulk)30861 10" L Up To 1" 5/16" 12

30840 30860

BLACK PLASTIC CLEATDurable andnon-corrosive.

Bow Eye

Stern Eye

ANCHORING64

Item # Size Center to Center Fastener Case30760 10" 61/8" L 1/2" 2430770 12" 61/4" L 1/2" 1230780 15" 71/2" L 1/2" 12

CAST ALUMINUM "S" DOCK CLEAT

Tie your boat with the quick, easy and secure “S” shaped dock cleat. The oversized“S” shaped horns are easy to loop and are designed to accept oversized lines. Madefrom corrosion-resistant Aluminum, this well designed cleat features recessedmounting holes to eliminate line snag and fray without sacrificing strength anddurability. Mounting hardware not included.

Item # Size Center to Center Fastener Case30301 51/2" L x 11/4" H 21/8" L: 1" W #10 1230311 61/2" L x 11/4" H 25/8" L: 1" W 1/4" 1230321 8" L x 13/4" H 35/8" L: 11/2" W 1/4" 12

HOLLOW BASE YACHT CLEATChrome Plated Polished Cast Brass

Item # Size Center to Center Fastener Case30251 6" L x 11/4" H 21/4" L; 13/32" W #14 1230261 8" L x 11/2" H 213/16" L; 11/2" W 1/4" 1230271 10" L x 2" H 35/8" L; 17/8" W 1/4" 12

HOLLOW BASE CLEAT316 Stainless Steel

Item # Size Center to Center Fastener Case30481 4" L x 3/4" H 11/2" L; 1" W #10 12

HOLLOW BASE CLEATChrome Plated Zinc

Item # Size Center to Center Fastener Case30561 41/2" L x 3/4" H 1.65" L; 1.15" W #8 1230571 6" L x 7/8" H 2.20" L; 1.50" W #8 12

HOLLOW BASE CLEATChrome Plated Zamak

Item # Size Fastener Case30580 4" #10 12 (Bulk)30600 6" 5/16" 12 (Bulk)30610 8" 3/8" 12 (Bulk)30620 10" 7/16" 12 (Bulk)30630 12" 7/16" 12 (Bulk)

OPEN BASE DOCK CLEATGalvanized Gray IronHot dipped. Suitable for work boats, seawalls and dock use.

Item # Description Fits Case31501 Chrome plated zinc 3/4" Line 12 (Pr.)31601 Black nylon, etched finish 7/16" Line 12 (Pr.)

BOW CHOCKSSkene type bow chocks have anoverall length of 31/2". Bothmount with #8 screws.

31501 31601

Item # Line Size Case31251 Up To 5/8" 12 (Pr.)

BOW CHOCK316 Stainless SteelOverall length: 43/4". Width: 3/4".Pre-drilled for two #10 screws.

Item # Description Eye Case33531 Single Shank 1" ID 1233501 Double Shank 11/4" ID 12

BOW EYE

SINGLE SHANK33531: Die-cast ZAMAK eye

with Perma-Platefinish. Cadmiumplated shank.4000 lb. pull.Shank length:3" x 3/8"

DOUBLE SHANK33501: Chrome plated zinc

eye. Zinc plated steel U-bolt, nuts and washers.5000 lb. pull. Shank length: 3" x 5/16". Thread length: 23/4"

33531

33501

Item # Size Thread CaseBow Eye33600 3/8" 37/16" 12 (Bulk)33601 3/8" 37/16" 1233630 1/2" 37/16" 12 (Bulk)33631 1/2" 37/16" 1233641 1/2" 43/4" 12

Stern Eye33701 3/8" 37/16" 1233730 1/2" 37/16" 12 (Bulk)33731 1/2" 37/16" 12

BOW AND STERN EYE304 Stainless Steel

BOW EYES33601: 3200 lbs. pull. Face plate: 3/4" x 21/4". ID 11/8"33631: 4800 lbs. pull. Face plate: 3/4" x 3". ID 11/4"33641: 4800 lbs. pull. Face plate: 3/4" x 3". ID 11/4"

STERN EYES33701: 3200 lbs. pull. Face plate: 11/4" x 23/4". ID 11/8"33731: 4800 lbs. pull. Face plate: 11/2" x 31/2". ID 11/4"

White w/ Black Tracer

Blue w/ Black Tracer

Red w/ Black Tracer

Black w/ Red Tracer

Green w/ Black TracerBurgundy w/ Black Tracer

ANCHORING 65

Item # Size Color Case40861 1/4" x 6' Black 12 (Pr.)40831 1/4" x 6' Blue 12 (Pr.)40911 1/4" x 6' Burgundy 12 (Pr.)40851 1/4" x 6' Forrest Green 12 (Pr.)41891 1/4" x 6' Gold/White 12 (Pr.)40881 1/4" x 6' Navy 12 (Pr.)40891 1/4" x 6' Purple 12 (Pr.)40841 1/4" x 6' Red 12 (Pr.)40871 1/4" x 6' Teal 12 (Pr.)40901 1/4" x 6' White 12 (Pr.)40821 1/4" x 6' Yellow 12 (Pr.)

40961 3/8" x 6' Black 12 (Pr.)40931 3/8" x 6' Blue 12 (Pr.)40981 3/8" x 6' Burgundy 12 (Pr.)40951 3/8" x 6' Forrest Green 12 (Pr.)40991 3/8" x 6' Gold/White 12 (Pr.)40971 3/8" x 6' Navy 12 (Pr.)40941 3/8" x 6' Red 12 (Pr.)40921 3/8" x 6' White 12 (Pr.)

Black Blue

Burgundy Forrest Green

Gold/White Navy Purple

Red Teal White Yellow

DOUBLE BRAIDED NYLON FENDER LINE

• Premium double braid.Spliced on one end.

• Packaged in pairs

Item # Size Color Case42431 3/8" x 15' Black w/ Red Tracer 1242411 3/8" x 15' Blue w/ Black Tracer 1242451 3/8" x 15' Burgundy w/ Black Tracer 1242441 3/8" x 15' Green w/ Black Tracer 1242421 3/8" x 15' Red w/ Black Tracer 1242401 3/8" x 15' White w/ Black Tracer 12

DOUBLE BRAIDED 100% MFP DOCK LINE

New high tenacity, colored, braided, polypropylene line. Made of non-stretchmaterial that floats. Clamshell packed.

Item # Size Color Case47501 3/8" x 10' White/Blue Tracer 1247511 3/8" x 15' White/Blue Tracer 1247521 3/8" x 20' White/Blue Tracer 1247531 3/8" x 25' White/Blue Tracer 12

47551 1/2" x 15' White/Blue Tracer 1247561 1/2" x 20' White/Blue Tracer 1247571 1/2" x 25' White/Blue Tracer 1247581 1/2" x 30' White/Blue Tracer 6

47591 5/8" x 20' White/Blue Tracer 647601 5/8" x 25' White/Blue Tracer 647611 5/8" x 30' White/Blue Tracer 647621 5/8" x 35' White/Blue Tracer 6

47631 3/4" x 25' White/Blue Tracer 647641 3/4" x 35' White/Blue Tracer 647651 3/4" x 50' White/Blue Tracer 4

PREMIUM THREE STRAND TWISTED NYLONDOCK LINE WITH TRACER

Extremely strong rope with 10" eye splice (3/4" rope: 18" eye splice). Designed toabsorb sudden shock loads. Very good resistance to abrasion, rot, oils, gasoline andmarine growth. Clamshell packed. White with contrasting blue tracer.

Item # Size Color Case42501 3/8" x 10' White 1242511 3/8" x 15' White 1242521 3/8" x 20' White 1242531 3/8" x 25' White 12

42551 1/2" x 15' White 1242561 1/2" x 20' White 1242571 1/2" x 25' White 1242581 1/2" x 30' White 6


42631 3/4" x 25' White 642641 3/4" x 35' White 642651 3/4" x 50' White 4

3-STRAND TWISTED NYLON DOCK LINE

Extremely strong rope with 10" eye splice (3/4" rope: 18" eye splice). Designedto absorb sudden shock loads. Very good resistance to abrasion, rot, oils,gasoline and marine growth. Clamshell packed.

Item # Color Size Eye Boat Size Case79231 White 4" x 16" 9/16" 10' - 15' 879221 White 5" x 18" 5/8" 15' - 20' 679211 White 6" x 22" 3/4" 20' - 25' 479201 White 8" x 26" 3/4" 25' - 35' 4

FENDER• Soft vinyl• Molded ribs• Inflation valve to adjust firmness• Molded-in eyelets• Vertical or horizontal use

ANCHORING66

Premium double braid docklines complete with 15" eyesplice (3/4" rope: 24" eye splice).Pre-shrunk and heat stabilized.These lines offer higher wetstrength and better abrasionresistance than other nylons.Won’t mold or mildew.Individually clamshell packed.

Blue

Red

Forrest Green

Black

Teal

Navy

Purple

Burgundy

Gold/White

YellowWhite

DOUBLE BRAID NYLON DOCK LINE

Item # Color Size Case40291 Black 3/8" x 15' 1240271 Black 3/8" x 20' 1240321 Black 3/8" x 25' 1240351 Black 1/2" x 15' 1240401 Black 1/2" x 20' 1240381 Black 1/2" x 25' 640461 Black 5/8" x 20' 640441 Black 5/8" x 25' 646961 Black 5/8" x 30' 640421 Black 5/8" x 35' 647201 Black 3/4" x 25' 647211 Black 3/4" x 35' 647221 Black 3/4" x 50' 4

40301 Blue 3/8" x 15' 1240281 Blue 3/8" x 20' 1240331 Blue 3/8" x 25' 1240361 Blue 1/2" x 15' 1240411 Blue 1/2" x 20' 1240391 Blue 1/2" x 25' 640471 Blue 5/8" x 20' 640451 Blue 5/8" x 25' 640431 Blue 5/8" x 35' 647301 Blue 3/4" x 25' 647311 Blue 3/4" x 35' 647321 Blue 3/4" x 50' 4

39931 Burgundy 3/8" x 15' 1239941 Burgundy 3/8" x 20' 1239951 Burgundy 1/2" x 15' 1239961 Burgundy 1/2" x 20' 1239971 Burgundy 1/2" x 25' 6

39681 Forest Green 3/8" x 15' 1239691 Forest Green 3/8" x 20' 1239701 Forest Green 1/2" x 15' 1239711 Forest Green 1/2" x 20' 1246981 Forest Green 5/8" x 30' 6

40011 Gold/White 3/8" x 15' 1240081 Gold/White 3/8" x 20' 1240021 Gold/White 3/8" x 25' 1240031 Gold/White 1/2" x 15' 1240241 Gold/White 1/2" x 20' 1240041 Gold/White 1/2" x 25' 640071 Gold/White 5/8" x 20' 640051 Gold/White 5/8" x 25' 646971 Gold/White 5/8" x 30' 640061 Gold/White 5/8" x 35' 647401 Gold/White 3/4" x 25' 647411 Gold/White 3/4" x 35' 647421 Gold/White 3/4" x 50' 4

39831 Navy 3/8" x 15' 1239841 Navy 3/8" x 20' 1239851 Navy 1/2" x 15' 1239861 Navy 1/2" x 20' 1239871 Navy 1/2" x 25' 639631 Navy 5/8" x 20' 639821 Navy 5/8" x 25' 646991 Navy 5/8" x 30' 639881 Navy 5/8" x 35' 6

39981 Purple 3/8" x 15' 1239991 Purple 3/8" x 20' 1240001 Purple 1/2" x 25' 6

39721 Red 3/8" x 15' 1239731 Red 3/8" x 20' 1239741 Red 1/2" x 15' 1239751 Red 1/2" x 20' 1239761 Red 1/2" x 25' 6

39771 Teal 3/8" x 15' 1239781 Teal 3/8" x 20' 1239791 Teal 1/2" x 15' 1239801 Teal 1/2" x 20' 1239811 Teal 1/2" x 25' 6

40091 White 3/8" x 15' 1240101 White 3/8" x 20' 1240111 White 1/2" x 15' 1240121 White 1/2" x 20' 1240131 White 1/2" x 25' 640261 White 5/8" x 20' 640251 White 5/8" x 25' 646951 White 5/8" x 30' 640141 White 5/8" x 35' 647101 White 3/4" x 25' 647111 White 3/4" x 35' 647121 White 3/4" x 50' 4

39891 Yellow 3/8" x 15' 1239901 Yellow 3/8" x 20' 1239911 Yellow 1/2" x 20' 12

Item # Color Size Case

Item # Color Size Case40221 White 3/16" x 100' 640231 White 3/8" x 50' 6

ANCHOR LINE - NYLON Solid nylon braid. Rot proof and abrasion resistant.

Item # Color Size Case40201 White 1/4" x 50' 640211 White 3/8" x 75' 6

ANCHOR LINE - POLYPROPYLENEHollow braided polypropylene. Rot proof. Complete withhook. Great for small boats and mushroom anchors.

ANCHORING 67

Item # Size Color Case40691 3/8" x 50' White 440711 3/8" x 100' White 440721 3/8" x 150' White 4


Extremely strong line designed to absorb suddenshock loads. Comes with thimble.

THREE STRAND TWISTED NYLON ANCHOR LINE

Item # Size Color Case47691 3/8" x 50' White / Blue Tracer 447711 3/8" x 100' White / Blue Tracer 447721 3/8" x 150' White / Blue Tracer 447911 3/8" x 200' White / Blue Tracer 4

47731 1/2" x 100' White / Blue Tracer 147741 1/2" x 150' White / Blue Tracer 147751 1/2" x 200' White / Blue Tracer 147781 1/2" x 250' White / Blue Tracer 1

47921 5/8" x 200' White / Blue Tracer 147931 5/8" x 250' White / Blue Tracer 1

PREMIUM TWISTED NYLONANCHOR LINE WITH TRACERExtremely strong line designed to absorbsudden shock loads. Comes with thimble.

Item # Size Color Case42201 3/8" x 100' Black 142161 3/8" x 100' Blue 142241 3/8" x 100' Burgundy 142321 3/8" x 100' Gold / White 142181 3/8" x 100' Forest Green 142221 3/8" x 100' Navy 142231 3/8" x 100' Purple 142171 3/8" x 100' Red 142211 3/8" x 100' Teal 142151 3/8" x 100' Yellow 142331 3/8" x 150' Gold / White 142341 3/8" x 200' Gold / White 1

42361 1/2" x 100' Gold / White 142281 1/2" x 150' Black 142251 1/2" x 150' Blue 142371 1/2" x 150' Gold / White 142271 1/2" x 150' Forest Green 142261 1/2" x 150' Red 142291 1/2" x 150' Teal 142381 1/2" x 200' Gold / White 142391 1/2" x 250' Gold / White 1

42311 5/8" x 250' Gold / White 1

DOUBLE BRAID NYLON ANCHOR LINE

Extremely strong line designed to absorb sudden shock loads. Comes with thimble.Black

Blue

Burgundy Gold/White

Forest Green

Navy Purple

Red

Teal

Yellow

Item #ROPERACK

ROPE REEL RACK DISPLAY• Simple and easy way to display rope reels• Gloss black finish with three crossbar• Holds 6-12 reels of rope depending on size• No assembly required

Item # Description Case79901 Complete Cutting Gun 12

Replacement Parts79911 Blade 12

ELECTRIC ROPE CUTTING GUNRope cutter quickly cuts and seals the end of syntheticropes in one fast movement. 120V AC at 60 Cycle. 1.1A100W. 5' cord.

Item # Size Strands Color Case42750 1/4" x 1000' 8 Yellow 142760 1/4" x 1000' 16 Yellow 1

DIAMOND BRAID POLYPROPYLENE ROPE SPOOLIt Floats!100% Polypropylene. Easy to splice. Resistant to rot,mildew and marine growth. 100% Monofilament fiber.Stronger than manila rope. Resists rot, mildew, acids,oils, etc. May be stored wet without damaging fibers.

Item # Size Color Case42710 1/4" x 600' Yellow 142720 3/8" x 600' Yellow 1

TWISTED BRAID POLYPROPYLENE ROPE SPOOLIt Floats!100% Polypropylene. Easy to splice. Resistant to rot,mildew and marine growth. 100% Monofilament fiber.Stronger than manila rope. Resists rot, mildew, acids,oils, etc. May be stored wet without damaging fibers.

Item # Size Color47790 1/4" x 600' White / Blue Tracer47850 5/16" x 600' White / Blue Tracer47800 3/8" x 600' White / Blue Tracer47810 1/2" x 600' White / Blue Tracer47820 5/8" x 600' White / Blue Tracer47860 3/4" x 600' White / Blue Tracer47870 1" x 600' White / Blue Tracer

PREMIUM 3-STRANDTWISTED NYLON ROPE SPOOL WITH TRACERManufactured from 100% filament nylon fibers. Has greatelasticity properties and the ability to absorb suddenshock loads. Excellent resistance to abrasion, rot, mildew,oil, grease, gasoline, acids and most chemicals. Whitewith contrasting blue tracer.

ANCHORING68

Item # Size Color40790 1/4" x 600' White42820 5/16" x 600' White40800 3/8" x 600' White40810 1/2" x 600' White40820 5/8" x 600' White42830 3/4" x 600' White42840 1" x 600' White42850 11/4" x 600' White42860 11/2" x 600' White

3-STRAND TWISTED NYLON ROPE SPOOLManufactured from 100% filament nylon fibers. Has greatelasticity properties and the ability to absorb suddenshock loads. Excellent resistance to abrasion, rot, mildew,oil, grease, gasoline, acids and most chemicals.

Item # Size Color47090 3/8" x 600' Black47080 1/2" x 600' Black

40160 3/8" x 600' Gold/White40170 1/2" x 600' Gold/White40180 5/8" x 600' Gold/White40190 3/4" x 600' Gold/White

47060 3/8" x 600' Navy

47000 3/8" x 600' White47010 1/2" x 600' White47020 5/8" x 600' White47030 3/4" x 600' White47040 1" x 600' White

Navy

White

Excellent high gradenylon. Long wearingand resists kinking.Can be used to makedock, anchor andmooring lines. 40160

Black

Gold/White

DOUBLE BRAID ROPE SPOOL

Item # Size Color42880 1/8" x 1000' White42890 5/32" x 1000' White42910 3/16" x 1000' White42900 1/4" x 1000' White42940 5/16" x 500' White42920 3/8" x 500' White42930 1/2" x 250' White

A strong, firm, uniformly round rope. Works exceptionallywell in blocks and on winches. Does not flatten underload. Has elasticity that allows it to absorb sudden shockloads. Resistant to rot, abrasion, mildew, gas and oil.

• Polypropylene• Multi-purpose• Buoyant• Resistant to rot, mildew

and marine growth

42790

Item # Size Color42780 3/8" x 500' Blue/White42770 3/8" x 500' Red/White42790 3/8" x 500' Green/White

42780

42770

SOLID BRAID 100% MFP MULTI-PURPOSE ROPE SPOOL

Item # Size Tensile Color48001 3/16" x 1000' 600 lbs. White48011 7/32" x 1000' 825 lbs. White48021 1/4" x 1000' 1000 lbs. White

TIE DOWN CORD

An economical general purpose rope. Constructed of 8strand white braided polypropylene cover with a knotholding control core. Excellent knot retention. Ideal foruse with boat covers or to form the support structure forshrink wrapping boats.

Item # Size Case79551 18" 10 (Pk.)79571 30" 10 (Pk.)

SHOCK CORDElastic shock cords areuseful in many applications.Hooks are coated to preventscratching. 5 per package.

SOLID BRAID NYLON ROPE SPOOL

Item # Size Hole Case56350 41/4" D x 41/4" W 3/4" ID 12 (Bulk)56351 41/4" D x 41/4" W 3/4" ID 12

Item # Length Hole Case56300 3" 1/2" ID 12 (Bulk)56301 3" 1/2" ID 12

TRAILER ACCESSORIES 69

Item # Base Span Hole Case56250 2" x 2" 4" 3/8" ID 12 (Bulk)56251 2" x 2" 4" 3/8" ID 1256260 3" x 3" 6" 1/2" ID 12 (Bulk)56261 3" x 3" 6" 1/2" ID 12

MOLDED “Y” BOW STOPBlack rubber.

BOW ROLLERBlack rubber.

WOBBLER ROLLERBlack rubber with chemically bonded zinc chromatewashers.

Item # Size Hole Case56330 43/8" D x 3" W 3/4" ID 12 (Bulk)

RIBBED ROLLERBlack rubber.

Item # Length Hole Case56140 4" 1/2" ID 12 (Bulk)56141 4" 1/2" ID 1256150 4" 5/8" ID 10 (Bulk)56151 4" 5/8" ID 10

56180 5" 1/2" ID 10 (Bulk)56181 5" 1/2" ID 1056190 5" 5/8" ID 10 (Bulk)56191 5" 5/8" ID 10

56210 8" 5/8" ID 10 (Bulk)56211 8" 5/8" ID 10

SPOOL ROLLERBlack rubber with plastic sleeve.

Item # Length Case56070 8" 12 (Bulk)56071 8" 12

56090 10" 12 (Bulk)56091 10" 12

56110 12" 12 (Bulk)56111 12" 12

HEAVY-DUTY KEEL ROLLERBlack rubber with 5/8" nylon inserts. Heavy dutysteel sleeve and tapered design provide longer lifeespecially with heavy boats. Stress weight,recommended max load 400 lb.

Item # Size Hole Case56360 12" x 21/2" 5/8" ID 10 (Bulk)

STRAIGHT ROLLERNon-marking black rubber.

Item # Size Hole Case56380 21/2" 5/8" ID 20 (Bulk)

SIDE GUIDE END CAPBlack rubber.

Item # Size Hole Case56400 31/2" dia. x 11/4" W 5/8" ID 20 (Bulk)

ROLLER END CAPBlack rubber.

TRAILER ACCESSORIES70

Item # Size Case56550 3" x 1/2" 12

V-BOW STOP• Non-marking TP yellow rubber• 5 year warranty• Bulk packaged

Item # Length Hole Case56560 3" 1/2" ID 1256580 4" 1/2" ID 12

BOW ROLLER• Non-marking TP yellow rubber• 5 year warranty• Bulk packaged


BOW ROLLER WITH BELLS• Non-marking TP yellow rubber• 5 year warranty• Bulk packaged• Includes: bolt, nuts and washers for mounting

Item # Size Hole Case56540 5" D x 3" W 11/8" ID 12

RIBBED ROLLER• Non-marking TP yellow rubber• 5 year warranty• Shaft size is 11/8" but can be reduced to

3/4" with supplied bushing• Bulk packaged


56500 5" 1/2" ID 1056520 5" 5/8" ID 10

SPOOL ROLLER• Non-marking TP yellow rubber• 5 year warranty• Bulk packaged

Item # Size Case56640 12" L x 31/2" W x 1" H 10

KEEL PAD• Non-marking TP yellow rubber• Fits 3" wide channel• Side hole mount• 5 year warranty• Bulk packaged

Item # Length Hole Case56420 8" 5/8" ID 1256440 10" 5/8" ID 1256460 12" 5/8" ID 12

KEEL ROLLER• Non-marking TP yellow rubber• 5 year warranty• Bulk packaged

Item # Length Hole Case56620 31/2" 11/4" ID 20

ROLLER END CAP• Non-marking TP yellow rubber• 5 year warranty• Bulk packaged

Item # Shaft Roller Size Length Case55701 1/2" OD 3" 43/8" 1255721 1/2" OD 4" 53/8" 1255731 1/2" OD 5" & 51/4" 65/8" 1255741 5/8" OD 4" 53/8" 1255751 5/8" OD 5" & 51/4" 65/8" 1255771 5/8" OD 8" 93/8" 1255791 5/8" OD 10" 113/8" 1255811 5/8" OD 12" 133/8" 12

Pal Nuts55851 Pal Nuts (10) Fits 1/2" OD Shaft - 1255861 Pal Nuts (10) Fits 5/8" OD Shaft - 12

ROLLER SHAFT AND PAL NUTSZinc plated steel. Roller shaft comes complete with2 pal nuts. Extra pal nuts sold in packs of 10.


SPLIT KEEL ROLLER BRACKET9 Gauge galvanized steel. Allows for use with anywidth roller. Features a 5" slot for verticaladjustments. Mounts with 1/2" bolt and isdesigned to be used with a 5/8" roller shaft.

Item # Size Slot Center Case55580 5" 23/4" 12 (Bulk)55600 8" 53/4" 12 (Bulk)55620 10" 83/16" 12 (Bulk)55640 12" 101/8" 12 (Bulk)

KEEL ROLLER BRACKET11 gauge galvanized steel. One-piece keel roller bracketwith 5" slot for vertical adjustment. Mounts with 1/2" boltand is designed to be used with a 5/8" roller shaft.


Item # Thread A B C Type For Plate Reference Case57200 7/16"-14 19/16" 39/16" 13/4" SQ Axle U-Bolt Plates - 1257201 7/16"-14 19/16" 39/16" 13/4" SQ Axle U-Bolt Plates - 1257210 7/16"-14 21/16" 213/16" 13/4" SQ Bolster Brackets for 2" Frames 55311, 55331, 55351 1257211 7/16"-14 21/16" 213/16" 13/4" SQ Bolster Brackets for 2" Frames 55311, 55331, 55351 1257220 7/16"-14 31/16" 213/16" 13/4" SQ Bolster Brackets for 3" Frames 55311, 55331, 55351 1257221 7/16"-14 31/16" 213/16" 13/4" SQ Bolster Brackets for 3" Frames 55311, 55331, 55351 1257230 7/16"-14 31/16" 45/16" 13/4" SQ - - 1257231 7/16"-14 31/16" 45/16" 13/4" SQ - - 1257240 7/16"-14 41/16" 213/16" 13/4" SQ Bolster Brackets for 4"

Frames 4" Frame Tie Plates55311, 55331, 55351 12

57241 7/16"-14 41/16" 213/16" 13/4" SQ Bolster Brackets for 4"Frames 4" Frame Tie Plates

55311, 55331, 55351 12

57300 3/8"-16 13/4" 43/8" 13/4" RD Axle U-Bolt Plates (Round Axles) 55081 1257301 3/8"-16 13/4" 43/8" 13/4" RD Axle U-Bolt Plates (Round Axles) 55081 1257310 3/8"-16 13/8" 45/16" 13/4" RD Pipe Bunks 2", 3", 4" & 5" Frames 55081 1257311 3/8"-16 13/8" 45/16" 13/4" RD Pipe Bunks 2", 3", 4" & 5" Frames 55081 1257320 3/8"-16 15/8" 39/16" 13/4" SQ Axle U-Bolt plates 55081 1257321 3/8"-16 15/8" 39/16" 13/4" SQ Axle U-Bolt plates 55081 1257330 3/8"-16 21/16" 33/8" 13/4" SQ 2" Frame Tie Plates 55201 1257331 3/8"-16 21/16" 33/8" 13/4" SQ 2" Frame Tie Plates 55201 1257340 3/8"-16 21/16" 77/8" 4" SQ Guide On Assemblies - 1257341 3/8"-16 21/16" 77/8" 4" SQ Guide On Assemblies - 1257350 3/8"-16 31/16" 37/8" 13/4" SQ - - 1257351 3/8"-16 31/16" 37/8" 13/4" SQ - - 1257360 3/8"-16 31/16" 47/8" 13/4" SQ 3" Frame Tie Plate 55221 1257361 3/8"-16 31/16" 47/8" 13/4" SQ 3" Frame Tie Plate 55221 1257400 1/2"-13 19/16" 41/16" 2" SQ Axle U-Bolt Plates 55111 1257401 1/2"-13 19/16" 41/16" 2" SQ Axle U-Bolt Plates 55111 1257410 1/2"-13 21/16" 413/16" 2" SQ Axle U-Bolt Plates 55051 1257411 1/2"-13 21/16" 413/16" 2" SQ Axle U-Bolt Plates 55051 1257420 1/2"-13 23/8" 53/8" 2" RD Axle U-Bolt Plates 55161 1257421 1/2"-13 23/8" 53/8" 2" RD Axle U-Bolt Plates 55161 1257430 1/2"-13 31/16" 313/16" 2" SQ Axle U-Bolt Plates 55021 1257431 1/2"-13 31/16" 313/16" 2" SQ Axle U-Bolt Plates 55021 1257440 1/2"-13 31/16" 35/16" 2" SQ - - 1257441 1/2"-13 31/16" 35/16" 2" SQ - - 1257450 1/2"-13 31/16" 45/16" 2" SQ - - 1257451 1/2"-13 31/16" 45/16" 2" SQ - - 1257460 1/2"-13 31/16" 55/16" 2" SQ - - 1257461 1/2"-13 31/16" 55/16" 2" SQ - - 1257470 1/2"-13 31/16" 65/16" 2" SQ - - 1257471 1/2"-13 31/16" 65/16" 2" SQ - - 12

U-BOLTSolid galvanized steel u-bolts with nuts and lock washers.Covers most U-Bolt applications. One per card or in bulk.Note: If item ends with a 0 = item is bulk. If item ends with a1 = item is packaged.

57200 57300 57320 57400

Item # Size Assembled Case55310 8" 9" 12 (Bulk)55330 10" 11" 12 (Bulk)55350 12" 13" 12 (Bulk)55300 Angle Bracket Only - 12 (Bulk)

SWIVEL BOLSTER BRACKETHeavy 11 gauge galvanized steel that is slotted forvertical adjustment. Non-slip dimples for securehold. Angle bracket pivots for angled or flatmounting of 2" x 6" bunk or bolster boards.Complete with nut and bolt for angle bracket.Mounts with 1/2" bolt. Bracket angle 3.5" W.

U-BOLT APPLICATION CHARTFrame Size Use Item #2" Frame 572103" Frame 572204" Frame 57240

Item # Size Case55490 8" L x 2" W 12 (Bulk)55510 10" L x 2" W 12 (Bulk)

11 Gauge Galvanized SteelFor mounting bunks. Slotted for verticaladjustments. Mounts with 1/2" bolt.

Item # Size Color Case55981 8" x 12’ Black 1655991 12" x 12’ Black 10

BUNK CARPETINGProtects boat hull from mars and scratches. Helps inlaunching and loading. Made of black solution-dyedpolyester that is superior to polypropylene. Won’t fray orunravel. Resists mold and mildew. Easy to cut to any size.Restricted from sale in California.

BUNK BRACKET


Item # Axle A B C D E Spring Bolt For Case55051 13/4" & 2" 1/4" 4" 25/8" 33/8" 23/8" 13/4" 1/2" U Bolt 5741 1255081 11/4" & 11/2" 1/4" 31/2" 21/4" 3" 2" 13/4" 3/8" U Bolt 5732 or 5730 1255111 11/4" & 11/2" 1/4" 31/2" 21/4" 3" 2" 13/4" 1/2" U Bolt 5740 12

MEDIUM-DUTY AXLE U-BOLT PLATEGalvanized solid steel. For use on square beam and tube axles. 4-hole bolt pattern. Use spring 13/4".

Item # A B C D E Case55161 1/4" 35/8" 215/16" 33/4" 215/16" 12

HEAVY-DUTY AXLE U-BOLT PLATEGalvanized Solid SteelFor use on 23/8" round beam axles.For 13/4" springs. Use 1/2" Bolts.Use U-bolt model 5742.

Item # Width A B C E For Card Case55201 2" 41/16" 1" 29/16" 1/4" U Bolt 5733 1 pair 12 (Pr.)55221 3" 51/16" 1" 39/16" 1/4" U Bolt 5736 1 pair 12 (Pr.)55231 4" 61/16" 1" 49/16" 1/4" U Bolt 5724 1 pair 12 (Pr.)

FRAME TIE PLATEFrame tie plates are used inapplications such as mountingboat trailer brackets andfastening spring sliders. Made of1/4" plated steel with radius ends.Hole diameter 7/16".Use bolt size 3/8".

Item # Description A B C D Case55021 2 bolt pattern 1/4" Solid Steel 51/16" 39/16" 11/2" 12

LIGHT-DUTY AXLE U-BOLT PLATEGalvanized Solid SteelFor use on 11/4" x 11/2" squarebeam axles and light-duty tubeaxles. For 13/4" wide springs.Use 1/2" bolts. Use U-boltModel 57431.

Item # Center to Center Width Dia. Card Case54861 21/4" 11/4" 9/16" 2 12 (Pr.)54881 23/4" 11/4" 9/16" 2 12 (Pr.)54901 35/8" 11/4" 9/16" 2 12 (Pr.)

SPRING SHACKLE1/4" zinc plated steel. Punched to accept 9/16" splinedshackle bolt Model 54911.

Item # Size Card Case54911 9/16-18 x 3" 2 12 (Pr.)

SHACKLE BOLTZinc splined bolt that keeps bolt from rotating. Nutincluded. For use with spring shackles Models 54861,54881, 54901.

Item # Lugs Bearings Capacity Case53121 4 1" 1,250 lbs. 453141 5 1" 1,250 lbs. 453161 5 11/16" 1,250 lbs. 453201 5 13/8" x 11/16" 1,750 lbs. 4

PAINTED TRAILER WHEEL HUB Black one piece cast hubs complete with pregreasedbearings, seals, dust caps, cotter pin and lug nuts.

Item # Lugs Bearings Capacity Case53021 4 1" 1,250 lbs. 453041 5 1" 1,250 lbs. 453061 5 11/16" 1,250 lbs. 453101 5 13/8" x 11/16" 1,750 lbs. 4

GALVANIZED TRAILER WHEEL HUB One piece cast hubs complete with pregreased bearings,seals, dust caps, cotter pin and lug nuts.

Item # Description Pack Case53901 Spare Wheel Bolts - 1/2-20 5 12 (Pk.)53911 Spare Lug Nuts - 1/2-20 5 12 (Pk.)

REPLACEMENT WHEEL PARTSReplacement parts forcommonly used trailer wheels.

53901

53911

Item # Size Case51501 1.980" 10 (Pr.)

BEARING PROTECTORS WITH COVERTriple chrome plated housing. All stainless steel internalparts. Avoids bearing corrosion by preventing intrusion ofwater and dirt. Continuous bearing protection andlubrication by means of grease fitting for simple and easyfilling. 1.980 diameter fits L44643, L44649, L44640 coneand L44610 cup.


Item # Size Case51541 1.980" 10 (Pr.)

BEARING SAVER™ & HUB PROTECTOREngineered specifically to protect bearings from theelements. Coiled stainless steel spring, combined with aneoprene seal, maintains grease under constant pressurewhen filled. A built-in outlet allows surplus grease toescape if the hub is over filled or excessive pressureoccurs. Extended grease fitting indicates full or thatadditional grease is needed. The integral flange allows forsimple installation and removal. Molded polycarbonateconstruction provides exceptional impact resistance and eliminates corrosioncaused problems.


BEARING PROTECTOR COVERHelps prevent grease from splattering trailerwheels. Two per card.

Item # Size For Card Case53631 1.980" Bearing Kit 53531, 53541, 53571 2 10 (Pr.)

GREASE CAPSteel caps for most common applicationused in bearing kits.

Item # Axle Case53521 3/4" 1253531 1" 1253541 11/16" 1253551 11/4" 1253561 11/4" x 3/4" 1253571 13/8" x 11/16" 12

Ranger Kits Fits Ranger Trailers53581 1986 and older 1253591 1987-1989 1253601 1990 and newer 12

TRAILER WHEEL BEARING KITEach Kit Contains: • 2 bearings with races• 1 grease seal• 1 cotter pin

Model Cone/Bearing Cup/Race Seal53521: LM11949 LM11910 Single Lip, AE8439N53531: L44643 L44610 Double Lip53541: L44649 L44610 Double Lip, AD1836N53551: LM67048 LM67010 Single Lip, AE2253N53561: LM67048/LM11949 LM67010/LM11910 Single Lip53571: L68149/L44649 L68111/L44610 Double Lip, AE2592N53581: L68149/L44649 L68111/L44610 Double Lip, 1109753591: L68149/L44649 L68111/L44610 Double Lip, 1109753601: L68149 (2) L68110 (2) Double Lip, 11097


TRAILER JACK STAND WHEEL STOPMade of ABS plastic. Wheel stop prevents trailerfrom moving around or sinking in dirt or asphalt.For use with trailer jacks for boats and personalwatercraft. Color: Black.

Item # Case53851 12

LOCKABLE SPARE TIRE CARRIERZinc plated U-Bolt carrier secures tire on tongue or frameup to 3" wide. May be used on 4 or 5 hole rims. Will fit all8" - 14" and most 15" wheels. Will prevent theft of sparetire. Does not include lock.

Item # Description Case53871 Zinc Plated 12

SIDE MOUNT SPARE TIRE CARRIERHeavy duty, welded and reinforced steel plateconstruction. Zinc plated for superior corrosionresistance. One-piece construction for extra strength towithstand vibration. Mounts tire up and out from trailerframe for that custom trailer look. Mounts on frames upto 3" W x 4" H. All mounting hardware included. Packed in display box.

Item # Case37401 12

TRAILER HITCH LOCKDesigned to fit in padlock hole of trailer coupler for trailersecurity. Solid brass body hasp. Heat treated lock is pickresistant. Pin diameter 1/4". Closed position 15/8".

Item # Pin Fits Case52081 5/16" 2" and 3" coupler 1252091 1/4" 13/4" coupler 12

LOCKING PINSolid Zinc Plated SteelKeeps coupler release handlefrom disengaging while in travel.Will not prevent theft.

5208152091

Item # Channel Size Ball Max Load Receiver Case52411 21/2" 17/8" 2,000 lbs. Class I 652421 3" 17/8" 2,000 lbs. Class I 6

52451 21/2" 2" 3,500 lbs. Class II 552461 3" 2" 3,500 lbs. Class II 5

TRAILER COUPLERConstructed of durable steel. Can be usedwith all Seachoice trailer coupler balls.

Item # Ball Case52471 17/8" 1252481 2" 12

COUPLER REPAIR KITSteel construction. Will fit Seachoicecouplers and most other brands.


Item # Receiver Rise DropTongueCapacity

TowCapacity Case

52301 11/4" Hi-Low 31/8" 33/4" 300 lbs. 3,500 lbs. 1052321 11/4", Straight 5/8" 11/4" 300 lbs. 3,500 lbs. 8

52341 2", Hi-Low 2" 31/4" 500 lbs. 5,000 lbs. 1052361 2", Straight 3/4" 2" 500 lbs. 5,000 lbs. 8

TRAILER BALL MOUNT

Corrosion resistant Black finish. Square receiver tube.52301 52341 52321

Item # Size Receiver Case52381 1/2 Class I & II 1252391 5/8 Class III, IV and V 12

RECEIVER PIN WITH CLIPMade of zinc plated steel.

Item # Case51801 12

BRAKE LIGHT HITCH COVERRed brake light that fits 2" receivers.Includes 4-way flat connector.

Item # Ball Shaft SAE Class Capacity Case51301 17/8" dia. 3/4" x 11/2" I 2000 lbs. 1251311 17/8" dia. 3/4" x 25/16" I 2000 lbs. 12

51321 2" dia. 3/4" x 11/2" II 3500 lbs. 1251331 2" dia. 3/4" x 25/16" II 3500 lbs. 1251341 2" dia. 1" x 2" III 5000 lbs. 12

51361 25/16" dia. 1" x 2" IV 6000 lbs. 12

TRAILER COUPLER BALLChrome plated steel. Complete with lock washer and nut.Packaging can be peg-hooked or self standing.

Item # Size Receiver Max Load Case51271 7/32" x 36" Class I 700 lbs. 1051281 1/4" x 42" Class III 900 lbs. 10

TRAILER SAFETY CHAINZinc plated. Welded link chain with safety hooks.

Item # Max Load Case52051 2,500 lbs. 2

DROP LEG TRAILER JACK - HEAVY DUTYFixed mount jack with drop leg.Suited for heavy duty applicationsand fits trailer frames up to 3" x 5".Bolt-on style and includes allmounting hardware. 28" of lift.

Item # Description Case52021 1000 lbs. Lift capacity 152031 1500 lbs. lift capacity (Heavy Duty) 1

Replacement Parts52070 6" Wheel for 52021 8 (Bulk)52060 8" Wheel for 52031 6 (Bulk)

FOLD UP TRAILER JACKSwings from vertical position to horizontal for fastgetaway. Spring loaded latch locks and releasesthe jack from one position to the other.Manufactured of corrosion resistant steel. Lifttravel: 10". Maximum lift 24". Individually boxed.

52021 52031

Item # Size Case52070 6" 8 (Bulk)52060 8" 6 (Bulk)

TRAILER JACK REPLACEMENT WHEELBlack poly reinforced replacement wheel.

Item # Max. Load Ratchet Hub Gear Ratio Case52131 800 lbs. 1-Way 3/4" dia. 3.2:1 1052161 1000 lbs. 1-Way 3/4" dia. 4.1:1 1052191 1200 lbs. 1-Way 3/4" dia. 4.1:1 1052251 2000 lbs. 2-Way 1" dia. 4.1:1/9:8:1 4

Includes Winch StrapConstructed of zinc plated steel. Features 1 or 2-way ratchet with free spool centerposition. Has one piece solid gear. Pre-drilled for 3 bolt mounting.52131: Strap 2" x 16'52161, 52191 & 52251: Strap 2" x 25'

52131 52161

52191 52251

TRAILER WINCH


Item # Type Length Case51241 With Loop End 20' 1251251 With Tail End 20' 1251261 PWC, w/Loop End 12' 12

WINCH STRAPHigh strength 2" wide polyester strap with 4000 lbs. breakstrength. Safe working load of 1000 lbs. Notrecommended for use where personal safety is involved.

Item # Length Size Breaking StrengthHookStrength Case

51171 25' 5/32" 2,800 lbs. 4,500 lbs. 1051181 25' 3/16" 4,000 lbs. 7,000 lbs. 10

WINCH CABLEDO NOT USE FOR LIFTINGGalvanized 7 x 19 aircraft cable. Heavy dutygalvanized snap hook.


WINCH HOOKHeavy Duty, Forged Steel, Zinc PlatedClosure is spring loaded. 5/8" throat.


WINCH HOOKHeavy Duty, Forged Steel, Zinc PlatedNot recommended for overhead lifting.

Item # Length Width Case51221 4' 2" 10 (Pr.)

TRANSOM TIE DOWN STRAPConstructed of black heavy-duty weather resistantwebbing. Rust resistant plated “S" hook on each end.Center cam-action buckle adjusts length and tension.Velcro closure pad helps to protect boat finish.

Item # Length Width Case51211 4' 2" 12 (Pr.)

PREMIUM TRANSOM TIE DOWN STRAP

Constructed of strong polypropylene webbing. Coated “S” hooks on both endseliminate rusting. Positive lock/quick release buckle provides easy on/off access,yet provides a strong hold.

Item # Length Width Case51021 10' 2" 10 (Ea.)51041 12' 2" 10 (Ea.)51061 14' 2" 10 (Ea.)51081 16' 2" 10 (Ea.)51101 18' 2" 10 (Ea.)51121 20' 2" 10 (Ea.)

GUNWALE TRAILER TIE DOWN STRAP

Black polyester strap with cadmium plated “J” hook. Quick release adjuster.

Item # Length Width Case51051 12' 2" 12 (Ea.)51071 14' 2" 12 (Ea.)51091 16' 2" 12 (Ea.)

PREMIUM GUNWALE TRAILER TIE DOWN STRAP

Premium gunwale straps are manufactured with high quality USA made polyesterwebbing. All stitches are made with a box stitch pattern for maximum strength.Single “J” hook on each side. Quick release adjuster allows for easy operation.

Item # Adjustable Size Case28001 20"-30" 4

ADJUSTABLE TRANSOM SAVER

Fits all outboard motors. Must have power tilt and trim to use this unit.Stainless steel fasteners suited for saltwater applications.

Item # Includes Case51401 Light Kit w/Side Lights 2

51421 Left 7 Function w/License Light 1051431 Right 6 Function Trailer Light 10

09961 Spare Light Bulb-Side Light 12 (Pr.)09971 Spare Light Bulb-Tail Light 12 (Pr.)

SUBMERSIBLE TRAILER LIGHT KIT

Meets Federal DOT SpecificationsPlastic construction with stainless steel contact strips.Kit includes:(2) Tail lights (51421 & 51431)(1) Wiring harness (13941)(1) License plate bracket(2) Side marker lights

Functions51421: Same as 51431 plus license plate light.51431: Tail light, turn signal, stop light, rear/side

reflectors and rear/side markers.


Item # Description Case51441 Deluxe Submersible Light Kit 10

51451 7 Function Light-Left 1051461 6 Function Light-Right 10

09961 Spare Light Bulb-Side Light 12 (Pr.)09971 Spare Light Bulb-Tail Light 12 (Pr.)

DELUXE SUBMERSIBLE TRAILER LIGHT KIT

Meets federal DOTspecifications. Patented “AirTrapping”, “Bottom Access”design keeps water, salt anddirt from entering the lightchamber thus eliminatingrunaway corrosion and bulbpopping. Lexan constructionassures long life.

Meets federal DOT specifications. Patented “Air Trapping”, “Bottom Access” designkeeps water, salt and dirt from entering the light chamber thus eliminating runawaycorrosion and bulb popping. Lexan construction assures long life.

51441: Light Kit Includes: (2) Tail lights, wiring harness, license plate bracket,(2) side markers, frame clips and wire connectors.

51451: Left 7 function: Tail light, turn signal, stop light,rear/side reflector, rear side markers and license plate light.

51461: Right 6 function: Tail light, turn signal, stop light,rear/side reflector, rear side markers.

Item # Case51951 2

SUBMERSIBLE OVER 80" WIDECOMBINATION LIGHT KIT

Meets DOT requirements.SubmersibleAcrylic lens and high impacthousing. Meets DOT requirementsfor stop, tail, turn, rear and sidereflector, side marker and licenseilluminator. Includes wire harnessand parts for connections

Item # Case51901 2

SUBMERSIBLE LED TRAILER LIGHT KIT

Totally Sealed and Submersible - 12V Kit Includes:• Right and left submersible tail lights• 2 Amber side marker lights• License plate bracket• 24' wishbone wiring harness with connector• 4' trunk wiring with connector• Hardware including wire clips, lugs and screws• Marine-grade tinned wire, stainless bolts and other hardware

for harsh salt water conditions

Item # Description Case51921 Left Side 8 Function 1051931 Right Side 7 Function 10

WATERPROOF OVER 80" LOW PROFILE TAIL LIGHTMeets Over 80" DOT SpecificationsPreinstalled 15" pigtails. Size: 8" L x 27/8" H x 23/4" D.

Functions:• Tail light • Stop • Red side marker • Rear clearance light • Turn signal • Side and rear reflector

Item # Description Case51471 LH 7 Function 1051481 RH 7 Function 10

SUBMERSIBLE 7 FUNCTION TAIL LIGHT• Completely submersible• Red body• 2" mounting & hardware included• 6" W x 2" D x 31/2" H

Item # Description Case51871 LH 7 Function 1051881 RH 7 Function 10

SUBMERSIBLE 7 FUNCTION TAIL LIGHT• Red body• 2" mounting & hardware included• 6" W x 2" D x 31/2" H• Curved side extension

Item # Description Case52651 Right Side: Stop, tail, turn, rear

and side reflector, side marker10

52661 Left Side: Stop, tail, turn, rear and side reflector,side marker and license illuminator

10

SUBMERSIBLE LED COMBINATION LIGHT

14 Super LED Lights

• Sealed acrylic lens and impact housing• Electronics completely sealed in epoxy to resist corrosion and moisture• Meets DOT requirements• 61/16" x 35/8" x 21/4"• Functions: Tail light, Stop, Red side marker, Rear clearance light, Turn signal, Side

and rear reflector.

Item # Description Case52631 Right Side: Stop, tail, turn, rear and side reflector,

and side marker10

52641 Left Side: Stop, tail, turn, rear and side reflector,side marker and license illuminator

10

SUBMERSIBLE LED OVER 80" WIDECOMBINATION LIGHT

12 Super LED Lights• Poly lens is sonic welded to housing• Meets DOT requirements• Size: 8 -1/16" x 27/8" x 213/16"• Functions: Tail light, Stop, Red side marker, Rear clearance light, Turn signal, Side

and rear reflector.


Item # Size Case51961 61/2" x 21/4" 12

SUBMERSIBLE OVAL LED TRAILER LIGHT

10 LED LightsStop and turn tail light with plug-in connector.

Item # Case51851 10

SUBMERSIBLE IDENTIFICATION LIGHT BAR

• Snap out bulb slide• Change bulbs without tools• Red body• 60" lead

Item # Size Case52511 161/2" L x 15/8" H x 11/16" W 10

SUBMERSIBLE STAINLESS STEEL ID BAR• Poly lens and housing are sonic welded• Three lights• Stainless steel bar

Item # Size Case52501 14" L x 1" W x 1/2" D 10

LED 7° BEND LIGHT BAR

• 6 LEDs• "V" Shaped bend to fit contour of trailer• 58" wire leads are copper braided and tinned for corrosion resistance• Mounting holes are 81/2" on center

Item # Size Case51831 161/2" L x 17/8" H x 17/16" W 12

SUBMERSIBLE 3" LED TRAILER LIGHT BAR

LED light bar with plug-type wire connectors.

Item # Lens Case52521 Amber 1252531 Red 12

SUBMERSIBLE MINI SEALEDCLEARANCE MARKER LIGHT• Lens with white housing on

stud mount• Poly lens and housing are

sonic welded• Pre-installed lead wire

52521 52531

Item # Description Case52541 Amber lens, chrome bracket 12

52621 Amber lens, black bracket 1252551 Red lens, black bracket 12

52591 Amber module only 1252601 Red module only 12

SUBMERSIBLE SEALED CLEARANCE MARKER LIGHT

• 18" lead wire• Poly lens and housing are sonic welded

52541 52551 52591

Item # Size Case51841 51/2" x 3/4" x 11/2" 12

SUBMERSIBLE AMBER SIDEMARKER LIGHT W/ REFLECTOROne piece made of “Lexan” with patented air trapping.

Item # Case52611 6

SUBMERSIBLE AMBER REFLEX CLEARANCE MARKER• Acrylic reflect lens• ABS housing• Stud mount side marker• Size: 23/4" x 21/8"


LED MARKER LIGHTS

Single diode LED marker lights.Requires a 3/4" hole. Includes agrommet and 16" leads. 52671 52681


SUBMERSIBLE LED SIDE MARKER LIGHT

Side marker light with plug-in connector. Dimensions: 27/8" x 11/2"

13971 13981

13911 13921



• Chrome housing on stud mount

• 3 Super LEDs• Poly lens and housing are

sonic welded• Pre-installed lead wire 52561 52691

SUBMERSIBLE LED MINI SEALED CLEARANCE / MARKER LIGHT

Item # Lens Pack Case52571 Amber 2 1252581 Red 2 12

SUBMERSIBLE RECTANGULAR REFLECTOR

• Adhesive back forquick mounting

• Size: 31/4" x 15/8"• 2 per pack

52571 52581

Item # Size Case51751 41/2" x 3" 12 (Pr.)

TRAILER LIGHT BRACKETBolt-OnBolt these brackets on trailer frame to mount manydifferent styles of lighting. Pre-drilled for easy attachment.Made of 11 gauge galvanized steel.

Item # Case51811 12

LICENSE PLATE BRACKETPre-drilled license plate bracket. Made of corrosion proofblack heavy-duty plastic.

Item # Connector Lead Case13841 2 Pole 12" on each side 12

MOLDED LINE CONNECTORCorrosion resistant construction. For 6, 12 and 24 voltapplications. 7A @ 12V.

Item # Description Case13871 Flat Body Set 1213891 Trailer Side Connector, Flat Male 1213901 Car Side Connector, Flat Female 12

TRAILER CONNECTOR - 4 PINFor 6, 12 & 24 voltapplications.

For 6, 12 & 24 volt applications.13871: 4 Pole shrouded connector. Set consists of: one 12" color coded

lead wire to trailer side and one 12" color coded lead wire to car side.13891: 4 Pole shrouded connector, trailer side. 12" color coded lead wire.13901: 4 Pole square shrouded connector, trunk side. 48"

color coded lead wire.

1387113891

13901

Item # Connector Lead Case13971 5 Pole - Male 8" 1213981 5 Pole - Female 8" 12

TRAILER CONNECTOR

Item # Connector Lead Case13991 4 Pole 48" 1213931 5 Pole 48" 12

TRAILER WIRE HARNESS EXTENSION

Item # Description Case13911 Trailer Plug Tester - Inline 1213921 Trailer Plug Tester 12

TRAILER PLUG TESTERTester plugs into towvehicle. LED illuminates toshow if connections arecorrect and working.

Item # Connection Case13861 7 to 4 Way Adapter 1213851 7 to 5 Way Adapter 12

TRAILER ADAPTERConnects auxiliary, tail lights, ground, left, right and stop.

Item # Connection Length Case13831 7 Way Round to 4 Way Flat 8" 1213811 7 Way Round to 4 Way Flat 18" 12

13881 7 Way Round to 5 Way Flat 8" 1213821 7 Way Round to 5 Way Flat 18" 12

7-WAY ADAPTERAdapter mates 7-way vehicle to4 or 5-way trailer.

13831 13821



Item # Case13941 1213961 12

TRAILER “Y” HARNESSFlat - 4 PoleConsists of 48" vehicle side connector and 25' trailer sidecolor coded wires. Trailer side “split" to allow routing ofwire down both sides of trailer for easy hook-up. Safecolor coded wires.13941: Includes 6 frame straps and 2

quick splice connectors.13961: Includes 6 frame straps and 2

quick splice connectors. Marine-grade tinned wire.Item # Case51491 12

TRAILER LIGHT CONVERTERHeavy duty unit allows amber turn signals (5 wiresystems) on tow vehicle to operate standard 4-wire trailersystems. Made of black ABS plastic. Made to be wireddirectly into trailer wire harness.

MOTOR ACCESSORIES

STEERING ACCESSORIES

Item # Case18301 25

PROFLO MOTOR FLUSHERUniversalFlush away sand, silt and salt. Prevents clogging andcorrosion. For use on most outboards andinboard/outboards with side water inlets.

Item # Case18321 25

RECTANGULAR MOTOR FLUSHERFlush away sand, slit and salt. Prevents clogging andcorrosion. For use with most outboards andinboard/outboards.

Item # Case18311 12

MOTOR FLUSHERHeavy-duty High Impact Plastic FlusherRecommended for larger engines. Quickly flushes awaysalt, silt, alkali and sand. Extends engine life bypreventing clogging and corrosion. 4 stainless steelhose clamps included.

Item # Description Case18401 OMC O/B Flush Kit 1218411 Mercury/Mariner/Yamaha Flush Kit 12

OUTBOARD FLUSH KITFits all outboards flushing port. Easily snaps on, quicklyflushes salt water from outboard. O-ring sealed. Slidevalve stays on engine permanently. EASY installation! Kitcontains: slide valve, quick connect, rubber washer.

Item # Size Case28351 3" 12 (Pr.)28361 4" 10 (Pr.)

EXHAUST GUARD COVERBlack rubber with adjustable stainless steel clamp. Flapvalve prevents following seas from entering exhaust outletwhen stopping or moving slowly. All stainless steelclamps included.

PROPELLER WRENCHFits all 11/16" prop nuts. 9/16" Garboard drain plugsocket on back. Made of non-corrosive material.

Item # Description Case28541 Stainless Steel with turning knob & black center cap 528551 Stainless Steel with genuine teak cap 528581 Stainless Steel with permanent foam grip & black center cap 5

Replacement Parts28561 Teak Center Cap for 28551/28581 1228591 Black Plastic Cap for 28551/28581/28541 12

DESTROYER STEERING WHEEL

Stainless Steel. 5 spoke for sturdy trouble free operation.• Diameter - 15"• Dish - 25°• Fits standard 3/4" tapered shaft• All welded and polished 304 stainless steel construction

28541 28551 28581 Item # Dia. Case28510 131/2" 10 (Bulk)

STEERING WHEELBlack four-spoke steering wheel. Rim features richleather grain, stitching and finger grips.• 4 spoke• Dish - 37/8"• U.V. resistant• Fits all standard 3/4" tapered shafts• Meets NMMA, ABYC and IMCI standards

Item # Dia. Case28471 15" 5

FLAT STEERING WHEEL• 3 spoke• 304 stainless steel• Fits standard 3/4" tapered shafts• Stainless steel center cap included

STEERING ACCESSORIES 80

Item # Dia. Case28481 131/2" 528531 151/2" 5

Replacement Parts28431 12mm Replacement Nut 1228441 1/2"-20 Replacement Nut 1228461 5/8"-18 Replacement Nut 12

SPORTS STEERING WHEEL WITH TURNING KNOB• 3 spoke• Stainless steel fits 3/4" tapered shaft• Includes 5/8" - 18 and 1/2" - 20 nut

Item # Case28521 12

STAINLESS TURNING KNOBEasily converts existing destroyer wheels to the mostmodern versions. Installation tool included.

Item # Case28491 12

LARGE STAINLESS STEEL TURNING KNOBEasily converts existing destroyer wheels to the most modernversions. Attractive and durable black plastic center.

Item # Description Fastener Case28401 Twin Lever Control # 10 screws 6

Replacement Parts28411 Red Knob 1228421 Black Knob 12

TWIN LEVER CONTROLMade of chrome plated brass. Each separatelever controls clutch and throttle for one engine.Not for dual station applications. Functionseasily identified by red and black knobs.Designed to use 33C type control cables. Shimsand cable clamps are made of brass and aresupplied for easy installation. Overall height 85/16"Base: 45/16" W x 57/16" L x 3" H


TILLER ROPE PULLEYPair of stainless steel and plastic pulleys with twostamped stainless steel eye straps. Maximum rope size:1/4". OD of sleave: 25/16". 33/4" overall length.


TILLER ROPE CLAMPFor use with 1/8" or 3/16" rope. Chrome plated zinc.Dimensions: 11/4" x 11/16".

Item # Case28131 12

TRANSOM TRIM CONTROLProvides a weatherproof tilt control system at the stern area of theboat. Can be used for remote adjustment of hydraulic plates. 18"wiring harness included.


STEERING TUBE CLEANING BRUSH• Cleans tilt tubes• For use with electric drills• Sold in pairs

Item # Size Case28251 7/8" 1228261 1" 12

STEERING GUARDAll Stainless SteelThe Steering Guard should be installed on all cable and side-mounted hydraulic steering systems to lubricate, clean andseal the system. Will more than double the life of a newcable system. Made of stainless steel.Installs in 10 minutes. Eliminates greasysteering rods forever.

28251: Fits Honda, Mercury, Mariner, Johnson,Evinrude, Nissan, Suzuki,Tohatsu, Yamaha and Force with 7/8" thread.

28261: Fits Honda, Mercury, and Mariner with 1" thread.

Item # Case28301 10

STEERING CABLE PROTECTORHeavy-duty rubber boot to fit over output end of steeringcable at engine for complete protection from elementsand preventing lubrication from being washed away. Fitsall standard steering cables including Morse, Teleflex,Detmar, etc. Dimensions: 1" ID steering cable end, 3/8" IDoutput end, 11/2" overall diameter, 10" extended length,31/2" minimum length.

STEERING ACCESSORIES 81

Item # Size Case29300 3" 24 (Bulk)29301 3" 1229250 4" 24 (Bulk)29251 4" 12

MOTORWELL BOOTSeals off water intake and protects cables, wiring and gaslines. Made of durable vinyl plastisol.

Item # Finish Case15301 Stainless Steel Bezel 1015311 Black Bezel 1015321 Rectangular 12

HOUR METER

High impact polycarbonate case. Self-lubricating parts, increases shelf life, reducesfriction. Polarity insensitivity prevents installation errors. U-bracket mounting. 8V to32V DC. Meets NEMA and SAE specifications.

15301 15311 15321

Item # Description Case15391 Pitot Kit 1215381 100' of PVC Tubing for Pitot Kit 12

MARINE SPEEDOMETER PITOT KIT

Kit Includes:• 20' PVC tubing• (1) Black plastic clam shell vent• (4) Black plastic tube holder• (6) Stainless steel self-tapping screws

Item # Case15401 12

PITOT TUBEWeed resistant system provides steadywater pressure required for accuratereadings. Kick-up feature prevents breakage.

Item # Case28101 12

FOOT CONTROL SWITCHFoot control switch for manually operated (handcontrolled) trolling motors. Provides the convenience ofturning the motor on by simply pressing down on theswitch with your foot without having to reach the trollingmotor head. The foot switch is rated up to 50A DC andfeatures a 15° tilt angle for ease of operation. Has fliplever for continuous “on”. For 12V or 24V.

Item # Case28071 12

MOTORGUIDE MOUNTING BOLT AND ISOLATORAbove deck, easy mounting. Absorbstrailering and rough water shock. Set of 4.

Item # Description Case13751 Straight Male, Motor Side 1213761 Straight Female, Motor Side 1213771 Receptacle Female, Boat Side 12

TROLLING MOTOR PLUG

6" Leads with yellow butt connectors attached to 10 gauge wire. 12 volt. Face plate 13/4" x 21/2". Note: 13761 will not work with 13751.

13751 13761 13771

BOATYARD & MAINTENANCE82

Item # Color Size Case96931 Clear 2.8 oz. tube 12

96941 Clear 10.1 oz. cart. 12

Item # Color Size Case96961 White 2.8 oz. tube 12

96971 White 10.1 oz. cart. 12

HIGH PERFORMANCE MARINE SILICONE SEALANT - WHITE

• 100% Pure Silicone• Exceptional Adhesion• Non-Corrosive• Good Tear Resistance• Permanently Flexible• Low Odor• UL Recognition

96961 96971

Item # Type Size Case92001 Stainless Steel 73/4" 4892011 Brass 73/4" 48

WIRE BRUSHESWood handle. Brass bristles areused for softer applications.

92001 92011

Item # Lens Case92071 Clear, Polycarbonate 12

SAFETY GOGGLES These high impact safety goggles meet the requirementsof the Standard for Occupational and Educational Eye andFace Protection ANSI Z87.1-2003.

Item # Lens Case92081 Clear, Polycarbonate 12

SAFETY GLASSESMeet the requirements of the Standard for Occupationaland Educational Eye and FaceProtection ANSI Z87.1-2003.

Item # Size Case92101 3", 4 Wire 2492111 4", 4 Wire 2492121 7", 4 Wire 2492131 9", 4 Wire 24

92141 9", 5 (Heavy Duty) 24

WIRE ROLLER FRAME• Plated rods• 11/2" diameter• Plastic threaded handle

92131 92141

Item # Size Case92161 12" 20

12" WIDE ROLLER FRAME

Adjustable frame.

Item # Material Size Case92201 Metal 9" 2492211 Plastic 9" 24

92221 Plastic Tray Liner 9" 25

PAINT TRAYS

Paint trays have ladder lock legs.92201 92211 92221

Item # Material Size Case92231 Plastic 12" 20

12" WIDE PAINT TRAY

Item # Size Case90300 1/2" 24 (Bulk)90310 1" 24 (Bulk)90320 11/2" 24 (Bulk)90330 2" 12 (Bulk)90340 21/2" 12 (Bulk)90350 3" 12 (Bulk)90370 4" 12 (Bulk)

DOUBLE WIDE BRUSHImproved Thicker Handle w/ Longer Bristles

Double thick, Natural color hog bristles with plain woodhandle for applying fiberglass resins and adhesives.Withstands most thinners.Sold in Full Cases Only.

MARINE SILICONE SEALANT - CLEAR

• 100% Pure Silicone• General Purpose• Permanently Flexible• Cures at room temperature• Excellent Weatherability• Mold & Mildew Resistant• UL Recognition

9694196931

BOATYARD & MAINTENANCE 83

Item # Size Box92411 1" 5092421 2" 5092431 3" 2092441 4" 20

FOAM BRUSHQuality, high density foam with woodenhandle. For all smooth surfaces. Ideal for theapplication of enamel, latex, stain, oil paintsand varnish. Not for shellac or lacquer.

Item # Box Case92601 100 12

PAINT STRAINER - CONE TYPE• Medium nylon mesh• Disposable

Item # Size Thickness Color CaseHEAVY DUTY92501 3" 5mm Yellow 5092511 7" 5mm Yellow 5092521 9" 5mm Yellow 50

STANDARD92311 4" 3mm Yellow 2592321 7" 3mm Yellow 2592331 9" 3mm Yellow 25

92301 4" 3mm Yellow 25 (Pr.)

FOAM ROLLER COVERS• Heavy Duty rollers are extra thick for longer painting

action• Great for tight spots• Can be used with bottom paints• Polypropylene core

928919288192821

92731

Item # Size Nap Color CaseMOHAIR 92701 3" 1/8" Red 5092711 4" 1/8" Red 5092721 7" 1/8" Red 3692731 9" 1/8" Red 36

POLYESTER92841 9" 1/4" White 3692801 3" 3/8" White 5092811 4" 3/8" White 5092821 7" 3/8" White 3692831 9" 3/8" White 3692891 9" 3/8" Yellow 3692881 9" 3/8" Green 25 (Pr.)

ROLLER COVERS - HEAVY DUTY

All roller covers have a phenolic core and come in a variety ofcolors for your personal preference.

Item # Size Nap Color CaseMOHAIR 92741 12" 1/8" White 36

POLYESTER92861 12" 1/4" White 3692851 12" 3/8" White 36

12" WIDE ROLLER COVER

Phenolic Core

Item # Description Size Case92901 Acrylic, Yellow Stripe 4" 50 (Pr.)92911 Foam, White 4" 50 (Pr.)92921 Mini Roller Frame 4" 50

MINI ROLLER COVER & FRAME

Ideal for tight spaces.

92901: 1/2" Solvent resistant nap can be used with all paints includingbottom paints

92911: Foam is used for all smooth surfaces. Ideal for the application ofenamel, latex, stain, oil paints and varnish. Not for shellac or lacquer.Domed on two sides

92921: Plated rods with plastic threaded handle

92901 92911 92921

Item # Description Case92981 Plastic Tray Kit - 4 pc. 2092991 Metal Tray Kit - 4 pc. 20

PAINT KIT - 4 PIECE

Kits include: 9" wire frame (92131), 2" double wide chip brush (90330), 9" whitepolyester cover with 3/8" nap and phenolic core (92831) and a paint tray—plastic(92211) OR metal (92201).

9299192981

Item # Size Case90701 Quart 1290711 Gallon 4

9071190701


90681 90691

BILGE CLEANER


90641 90651

BOATYARD & MAINTENANCE84

Item # Size CaseCollar93171 L 1293181 XL 1293191 XXL 12

Hood93231 L 1293241 XL 1293251 XXL 12

COVERALLS - MICROPOROUS DISPOSABLE

White disposable coveralls protectagainst sprays, dust, coatings and fibers• Professional grade suits-breathable• Made of Polyethylene-laminated

polypropylene (spunbond-film)• High level of protection from resins,

fiberglass, paints and sanding dust(Type 5 & 6)

• Zipper front, elastic wrist and ankleopenings and front and back pockets

With Collar With Hood


BOAT WASHHeavy duty biodegradable formula foams easily and itsspecial cleaning agents remove tar, gas stains, exhaustsmudges, scum line and fish blood. It won't spot orstreak.

90601 90611

NON-SKID DECK CLEANERSafe on fiberglass, metal or painted surfaces. Foamsout ground-in dirt and stains. No harsh chemicals.Leaves a protective coating to repel dirt and stains.

HULL CLEANERBiodegradable formula removes stains fromgrassy marine growth, rust and waterlines.Safe for use on all surfaces.

Heavy DutyBiodegradable formula dissolves and removes grease,oil fuel sludge and foul odors. Safe on fiberglass,metal and plastic.

Item # Size CaseCollar93051 L 1293061 XL 1293071 XXL 12

Hood93111 L 1293121 XL 1293131 XXL 12

White disposable coveralls protectagainst sprays, dust, coatings and fibers• 3 Layer breathable SMS fabric

(spunbond-meltblown-spunbound)• Protection against fine dry particles

(Type 5)• Protection against limited liquid splash

and fine sprays (Type 6)• Zipper front, elastic wrist and ankle

openings and front and back pockets

With Collar With Hood

COVERALLS - SMS DISPOSABLE

Item # Description Case93001 Shoe 5093021 Boot 50

ANTI-SLIP SHOE AND BOOT COVERS

Shoe Boot

BOATYARD & MAINTENANCE 85

Item # Capacity Case90120 5 Gallon 12

BUCKET WITH HANDLE Durable and practical. This bucket serves multiple purposes.

Item # Case37481 12

“SUPER” HOL-TITE® HANDLENon-corrosive plastic handle holds two 4" suction cups.Useful for cleaning boat hulls from the water. Cupsrelease easily from boat hull.

Item # Bristles Size Case90581 Medium 6" 690591 Soft 6" 6

DECK BRUSH• Fits standard size threaded handles• Flared bristles and angled head• Peg hook style packaging option


Oil mixture container allows the addition of theexact amount of oil required for a 2 cycle engine.Oil level marks are in gallons and litres. Determinesratios for 100:1, 50:1, 24:1 and 10:1 mixes. Thiswide mouth, quart size bottle can prevent fouledplugs or seized engines that can result fromimproper oil mixing.

Item # Case19191 12

• For use with 32 oz. gear lube bottles• Fits any outboard or sterndrive• Yamaha / metric adapter included

Item # Case19181 12

OIL CHANGE PUMP

For emptying oil from inboard and I/Oengines. Made of solid brass withremovable tubing for ease of operationand cleaning.

Item # Size Case91000 4" x 4" x 13.25" 12

BILGE ABSORBENTManufactured from solid sheets of 100% blown polypropylene. Itabsorbs oil/fuel in the bilge so that remaining water can be pumpedoverboard. Absorbs 2 quarts of hydrocarbon. The “safety skin”, a toughuniversal fabric skin, absorbs small amounts of water making the bilgeabsorbent fire resistant without interfering with its oil absorbency. Thisskin assures that the absorbent material will not get into the bilge andpossibly foul moving parts. Great way to avoid fines from pumping oiloverboard. Help keep our waterways clean. Convenient tie downs keepbooms in place.

Item # Size Tensile Color48001 3/16" x 1000' 600 lbs. White48011 7/32" x 1000' 825 lbs. White48021 1/4" x 1000' 1000 lbs. White

TIE DOWN CORDAn economical general purpose rope. Constructed of 8strand white braided polypropylene cover with a knotholding control core. Excellent knot retention. Ideal foruse with boat covers or to form the support structure forshrink wrapping boats.

Item # Size48051 1/2" x 1500'48061 1/2" x 3900'

48071 3/4" x 1000'48081 3/4" x 2100'

WOVEN STRAP

Polyester. Used to support shrinkwrap covers.

OIL TO GAS MIXING CONTAINER

GEAR LUBE PUMP

BOAT COVERS86

STERLING SERIES BOAT COVERS

• Silver, water-resistant material reflects heat away from the boat• 150 Denier Polyester• Strong, color-fast and water-resistant for lasting outdoor durability• Seams are double folded for strength• Tie-down straps with buckles are included for securing quickly and safely• Adjustable elastic hem cords draw the cover’s hem tight against any shape hull for

a snug fit• Attachment hooks anchor to either the winch tower or tongue jack bracket for a

secure fit. Final adjustment to the elastic hem cord maintains a tight fit• 1 Year Warranty• Trailerable with a mesh storage bag included

Item # Boat Size Beam Width Case97311 16' - 18'6" 96" 2

STERLING SERIES FISH & SKI & PRO-STYLE BASS - BOAT COVER

Item # Boat Size Beam Width Case97321 14' - 16' 90" 2

STERLING SERIES V-HULL, TRI-HULL RUNABOUTS& ALUMINUM BASS BOAT - BOAT COVER

Item # Boat Size Beam Width Case97331 17' - 19' 102" 297341 19' - 21' 105" 297351 21' - 23' 105" 2

STERLING SERIES V-HULL RUNABOUTS & LOW PROFILECUDDY CABINS W/ RAIL - BOAT COVER

Item # Boat Size Beam Width Case97361 21' - 23' 102" 2

STERLING SERIES CENTER CONSOLE - BOAT COVER

Styled to fit. Trailerable boat covers. 100% 10 oz. cotton duck. Haze gray. Appliedwater repellent, mildew & UV resistant finish. 1/4" shock cord sewn in hem. Jointseams are folded 4-ply. Motor covers sewn into outboard model boat covers.

SEMI-CUSTOM BOAT COVERS

Item # Boat Size Beam Width97401 17' 6" 90"97421 18' 6" 96"97441 19' 6" 96"

SEMI-CUSTOM V-HULL RUNABOUT O/B - BOAT COVER

Item # Boat Size Beam Width97461 17' 6" 90"97481 18' 6" 96"97501 19' 6" 96"97521 20' 6" 96"97541 21' 6" 102"

SEMI-CUSTOM V-HULL RUNABOUT I/O - BOAT COVER

Item # Boat Size Beam Width97561 17' 6" 90"97581 18' 6" 94"97601 19' 6" 94"97621 20' 6" 96"

SEMI-CUSTOM WIDE BASS BOAT - BOAT COVER


SEMI-CUSTOM V-HULL FISHING/WIDE SERIES - BOAT COVER


SEMI-CUSTOM V-HULL CENTER CONSOLE - BOAT COVER

Item # Boat Size Beam Width97821 21' 6" 102"97831 24' 6" 102"

SEMI-CUSTOM PONTOON COVER W/RAILS & TOP - BOAT COVERIncludes Separate Motor Cover


SEMI-CUSTOM JON BASS BOAT - BOAT COVER

BOAT COVERS 87

Item # Fastener Case78011 #6 12 (Pr.)

BOAT COVER SOCKETSChrome plated zincAccommodates 3/8" battens up to 13/4". Overall Size: 31/4" x 5/8". Opening dimensions: 17/8" x 7/16".

Item # Size Case Pack78941 1" x 8' 12 12

TIE DOWN KITTie down kit consists of (12) black polypropylene strapswith quick release buckles.

Item # Color Adjustable Size Case78801 White To 96" 12 (Pr.)78811 Black To 96" 12 (Pr.)

ADJUSTABLE BIMINI TOP STRAPS1" nylon webbing. Ring, snap, and buckle are corrosionresistant. Great for most size Biminis and awnings.

Item # Material Size Stock Fastener Card Case28801 Non-Magnetic 300 Series Stainless Steel 15/8" L x 3/8" ID Eye Stamped #10 2 12 (Pr.)28811 304 Forged Stainless Steel 17/8" L x 11/32" ID Eye 1/4" #10 4 12 (Pk.)28831 Chrome Plated Zinc 17/8" L x 3/8" ID Eye 1/4" #8 4 12 (Pk.)28841 Nickel Plated Brass Wire (Fits 11/4" Strap) 211/16" L x 11/32" x 17/32" ID Eye 1/4" #8 2 12 (Pr.)28871 White Non-Corrosive Nylon 17/8" L x 11/32" ID Eye 1/4" #8 4 12 (Pk.)28881 Black Non-Corrosive Nylon 17/8" L x 11/32" ID Eye 1/4" #8 4 12 (Pk.)

EYE STRAPS

Multitude of applications. 28841: Use as battery hold down.

28801 28811 28831 28841 28871 28881

Item # ID Size Ring Size Case36951 1" 21/8" L 1/4" 12 (Pr.)

SPRING SNAPSChrome Plated Brass

Item # Color Fits Case76321 Black 1" OD tube 12 (Pr.)

INTERNAL EYE ENDManufactured from high impact, super tough nylon.Corrosion resistant. Use on square tubing.

Item # Color Fits Case76001 White 3/4" OD Tube 12 (Pr.)76011 Black 3/4" OD Tube 12 (Pr.)

76041 White 7/8" OD Tube 12 (Pr.)76051 Black 7/8" OD Tube 12 (Pr.)

INTERNAL EYE ENDManufactured from high impact, super tough nylon.Offers superior performance.

Item # Material Fits Case76081 Plastic / White 3/4" OD Tube 12 (Pr.)76091 Plastic / Black 3/4" OD Tube 12 (Pr.)76101 Plastic / White 7/8" OD Tube 12 (Pr.)76111 Plastic / Black 7/8" OD Tube 12 (Pr.)

Case75841 Chrome Plated Zamak 7/8" OD Tube 1275801 Stainless Steel 7/8" OD Tube 1275921 Stainless Steel 1" OD Tube 12

EXTERNAL EYE END

75841 7580176081

76081, 76091, 76101, 76111:Manufactured from high impact, super tough nylon.Offers superior performance.

75801, 75921:316 Stainless steel. Corrosion resistant. 1/4-28 cup pointset screw included. For 1/4" bolt.

Item # Material Fits Case76341 Nylon / Black 1" OD tube 12 (Pr.)

EXTERNAL EYE END• Super tough• Corrosion resistant• Use on square tubing

76241 76251 75861

75821 75901 75941

BOAT COVERS88

Item # Color Fits Case76361 Black 1" OD tube 12 (Pr.)

SQUARE JAW SLIDEManufactured from high impact,super tough nylon. Corrosionresistant. Use on square tubing.

Item # Material Fits Case76121 Plastic / White 3/4" OD Tube 12 (Pr.)76131 Plastic / Black 3/4" OD Tube 12 (Pr.)76161 Plastic / White 7/8" OD Tube 12 (Pr.)76171 Plastic / Black 7/8" OD Tube 12 (Pr.)

Case75851 Chrome Plated Zamak 7/8" OD tube 1275811 Stainless Steel 7/8" OD tube 1275931 Stainless Steel 1" OD tube 12

76121, 76131, 76161, 76171:Manufactured from highimpact, super toughnylon. Offers superiorperformance.

75811, 75931:316 Stainless steel. Corrosionresistant. 1/4"-20 boltand 1/4"-28 cup point setscrew included.

76121

75811 75851

Item # Material Feature Case76241 Plastic / White 12 (Pr.)76251 Plastic / Black - 12 (Pr.)

Case75861 Chrome Plated Zamak - 1275821 Stainless Steel - 1275901 Stainless Steel Heavy Duty 1275941 Stainless Steel W/Removable Pin 12

DECK HINGE

76241,76251: Manufactured from high impact, super tough nylon.

Offers superior performance.75861: Chrome Plated Zamak. Base size: 3/4" x 2 1/4". Screw size: 1/4"-2075821: 316 Stainless steel. Base size: 5/8" x 2 3/8". Screw size: 1/4"-20.75901: 316 Stainless steel. Corrosion resistant. 1/4-20 bolt included.

Predrilled for 2 #10 screws. Base size: 3/4" x 21/2"75941: 316 Stainless steel. Corrosion resistant. Includes 1/4" spring loaded

S.S. pin for quick removal. Predrilled for 2 #10 screws.Base size: 3/4" x 27/16"

Item # Material Feature Case76201 Plastic / White - 12 (Pr.)76211 Plastic / Black - 12 (Pr.)76281 Plastic / White w/SS Slide Lock 12 (Pr.)76291 Plastic / Black w/SS Slide Lock 12 (Pr.)75831 Stainless Steel - 12

SIDE MOUNT DECK HINGE

76201, 76211, 76281, 76291:Manufactured from high impact, super tough nylon. Offers superior performance.

75831:316 Stainless steel. Base size: 7/8" x 2". Screw size: 1/4"-20.

Item # Pin Size Case75961 1/4" Dia. 1" OD ring 12 (Pr.)

STAINLESS STEEL QUICK-DISCONNECT RELEASE PINSStainless steel with cable.

Item # Description Volts Case41801 Kit 12 10

Replacement Parts41821 Arm - 141831 Blade - 12

SELF-PARKING WINDSHIELD WIPER KITFrame Mounting Style Kit Contains:• Stainless steel motor housing with 17/8" shaft

length and 3/8" shaft diameter• Adjustable arm (110° sweep)• 11" Blade

Arm:41821, Blade: 41831

JAW SLIDE

76201

7629175831

MERCHANDISING AIDS 89

Item # CaseBANNER2X4 1

SEACHOICE BANNER

Three-color Seachoice 2' H x 4' W banner. Constructed of 8 mil poly with sewnhems and grommets on each corner for hanging.

Item # Description CaseGTKIT2 Pack of 16 1SH1 Sign Holder 1 (Pr.)

SEACHOICE CATEGORY SIGNS

Product category signs for easy identification. Strong and washable plastic.Mounting tabs not included.

Sign Categories(3) Seachoice Logo (1) Hardware(1) Cordage (1) Lighting(1) Electrical Equipment (1) Mooring(1) Electronics (1) Refinishing(1) Fishing Sports (1) Safety(1) Fuel Delivery (1) Trailer Equipment(1) General Accessories (1) Water Sports

Item #ROPERACK

ROPE REEL RACK DISPLAY• Simple and easy way to display rope reels• Gloss black finish with three crossbar• Holds 6-12 reels of rope depending on size• No assembly required

Item # DescriptionRACKANCHOR Rack and Sign

Replacement PartHEADERRACKSIGN Sign Only

ANCHOR RACK DISPLAYCost effective way of displaying anchors48" wide unit with self-selling header which drawscustomers’ attention.Display features adjustable rack and can hold between 14 and 20 anchors depending on size. Note: Anchors not included. ANCHOR SELECTION CHARTUTILITY

Boat NylonItem # Size Size Rope Chain41600 5E 10' -15' 3/8" 3/16" x 4'41610 7E 15' -19' 3/8" 1/4" x 4'41620 10E 20' -24' 3/8" 1/4" x 4'41630 13E 25' -28' 3/8" 1/4" x 4'41640 15E 28' -30' 1/2" 5/16" x 5'DELUXE

Boat NylonItem # Size Size Rope Chain41710 4S 12' -16' 3/8" 3/16" x 4'41720 8S 17' -24' 3/8" 1/4" x 4'41730 13S 25' -30' 3/8" 5/16" x 5'41740 18S 31' -34' 1/2" 5/16" x 5'41750 22S 35' -38' 1/2" 5/16" x 5'

MOORING (NOT AVAILABLE IN ALL LOCATIONS)90

Item # Model Weight Boat Size44800 44800 25 lbs. Up to 10'44810 44810 50 lbs. 10'-14'44820 44820 75 lbs. 14'-16'44830 44830 100 lbs. 16'-18'44840 44840 150 lbs. 18'-20'44850 44850 200 lbs. 20'-24'44860 44860 250 lbs. 25'-29'44870 44870 300 lbs. 30'-34'44880 44880 400 lbs. 35'-37'44890 44890 500 lbs. 37'-39'44780 44780 800 lbs. 40'+44790 44790 1,000 lbs. 40'+44750 44750 1,200 lbs. 40'+44760 44760 1,500 lbs. 40'+44770 44770 2,000 lbs. 40'+

MOORING ANCHORSMushroom type designed for permanentmoorings. Made of heavy cast iron. Mushroomtype designed for permanent moorings. Made ofheavy cast iron. New and improved designthicker shafts and larger eyes designed toaccept over-size shackles!

Item # Model Weight Boat Size43880 43880 25 lbs. Up to 10'43890 43890 50 lbs. 10'-14'43900 43900 75 lbs. 14'-16'43910 43910 100 lbs. 16'-18'43920 43920 150 lbs. 18'-20'43930 43930 200 lbs. 20'-24'43940 43940 250 lbs. 25'-29'43950 43950 300 lbs. 30'-34'43960 43960 400 lbs. 35'-37'43970 43970 500 lbs. 37'-39'43980 43980 800 lbs. 40'+43990 43990 1,000 lbs. 40'+

PYRAMID ANCHORS Pyramid anchors provide excellent holding power andwork in tidal waters and rocky or sandy bottoms. Theyare superior to concrete blocks because the anchorrapidly sets itself by presenting a digging edge topenetrate the bottom. The pyramid shape presents alarge surface area which creates high suction thatincreases the deeper it sets. The short shank allowsmooring in shallower waters without chain wrap-up, acharacteristic of mushroom anchors.

Item # Size44710 3/8" x 200'44720 1/2" x 200'44730 5/8" x 150'44740 3/4" x 100'

LONG LINK GALVANIZED CHAIN Grade 43 hot dipped galvanized chain. Ideal for moorings.Not available in all locations.

Item # Size A B C D M R Working Load Breaking Load Case43500 1/4" 11/4" 5/8" 3/4" 11/16" 5/16" 215/16" 850 lbs. 4,250 lbs. 1243510 5/16" 15/8" 3/4" 1" 11/4" 3/8" 39/16" 1,250 lbs. 6,250 lbs. 1243520 3/8" 2" 7/8" 11/4" 11/2" 1/2" 45/16" 2,250 lbs. 11,250 lbs. 1243530 1/2" 21/2" 13/16" 11/2" 2" 5/8" 53/8" 3,600 lbs. 18,000 lbs. 1243540 5/8" 3" 11/2" 13/4" 23/8" 3/4" 65/8" 5,200 lbs. 26,000 lbs. 643550 3/4" 31/2" 15/8" 2" 25/8" 7/8" 73/8" 7,200 lbs. 36,000 lbs. 643560 1" 41/2" 23/16" 21/2" 31/2" 11/8" 95/8" 12,500 lbs. 62,500 lbs. 1

EYE - EYE SWIVELHot Dipped GalvanizedForged C-1045 steel.

Item # Size A B C N K P R Working Load Breaking Load Case43600 1/4" 11/4" 5/8" 3/4" 25/32" 15/32" 1/4" 21/2" 850 lbs. 4,250 lbs. 1243610 5/16" 15/8" 3/4" 1" 27/32" 1/2" 5/16" 27/8" 1,250 lbs. 6,250 lbs. 1243620 3/8" 2" 7/8" 11/4" 11/16" 5/8" 7/16" 31/2" 2,250 lbs. 11,250 lbs. 1243630 1/2" 21/2" 11/4" 11/2" 115/32" 7/8" 1/2" 49/16" 3,600 lbs. 18,000 lbs. 1243640 5/8" 3" 19/16" 13/4" 117/32" 1" 5/8" 55/16" 5,200 lbs. 26,000 lbs. 643650 3/4" 31/2" 13/4" 2" 13/4" 11/8" 3/4" 6" 7,200 lbs. 36,000 lbs. 643660 1" 1" 23/16" 21/2" 213/16" 13/4" 11/8" 89/16" 12,500 lbs. 62,500 lbs. 1

JAW - EYE SWIVELHot Dipped GalvanizedForged C-1045 steel.

(NOT AVAILABLE IN ALL LOCATIONS) MOORING 91

Item # Size Max Load Breaking Strength Case43051 1/4" 1,100 lbs. 4,400 lbs. 12 (Pr.)43061 5/16" 1,650 lbs. 6,600 lbs. 12 (Pr.)43071 3/8" 2,200 lbs. 8,800 lbs. 12 (Pr.)43091 1/2" 4,400 lbs. 17,600 lbs. 12

BULK43040 3/16" 275 lbs. 1,100 lbs. 143050 1/4" 1,100 lbs. 4,400 lbs. 143060 5/16" 1,650 lbs. 6,600 lbs. 143070 3/8" 2,200 lbs. 8,800 lbs. 143080 7/16" 3,300 lbs. 13,200 lbs. 143090 1/2" 4,400 lbs. 17,600 lbs. 143110 5/8" 6,150 lbs. 20,600 lbs. 143120 3/4" 7,164 lbs. 31,800 lbs. 143130 7/8" 9,369 lbs. 39,682 lbs. 143140 1" 10,000 lbs. 44,000 lbs. 143150 11/4" 14,000 lbs. 60,000 lbs. 1

GALVANIZED ANCHOR SHACKLEWeldless, drop forged, galvanized to mil-spec.Packed 2 per card except for 1/2", single packed.

Item # Size Case43391 3/16" 12 (Pr.)43401 1/4" 12 (Pr.)43411 5/16" 12 (Pr.)43421 3/8" 12 (Pr.)43431 1/2" 12 (Pr.)43370 5/8" 1 (Bulk)43380 3/4" 1 (Bulk)

STAINLESS STEEL WIRE ROPE THIMBLE 304 Stainless SteelWire rope style thimbles. Meets federal specs.FFT- 276b type 2.

Alphabetical Index ....................................... 99-104

Anchoring ...................................................60-68

Boat Covers .................................................86-88

Boatyard & Maintenance .................................82-85

Electrical Equipment ......................................10-21

Electronics Accessories ...................................22-23

Fishing Accessories .......................................52-56

Fuel Accessories & Ventilation ..........................56-60

General Accessories ......................................28-32

Hardware ....................................................43-51

Lighting......................................................52-10

Merchandising Aids ...........................................89

Mooring .....................................................90-91

Motor Accessories .............................................79

Numeric Index ..............................................92-98

Plumbing ....................................................24-27

Safety Equipment ..........................................33-41

Steering Accessories ......................................79-81

Trailer Accessories ........................................69-79

Water Ski Accessories ....................................41-42

C O R P O R A T E O F F I C E

3131 N. Andrews Ave. Ext. • Pompano Beach, FL 33064

Phone: 954.581.1188 • Fax: 954.581.0901 • seachoice.com

©2013 Seachoice Products • All Rights Reserved. Printed in U.S.A.

TABLE OF CONTENTS•

©2014 Seachoice Products • All Rights Reserved. Printed in U.S.A.

TERMS & WARRANTY •

Understanding Seachoice Part NumbersThe first four digits of our part number refer to the actual part while the last digit refers to the type of packaging.

Part numbers ending with 1: The items are packaged in our self-merchandised visual packaging. They are either “Carded”, “Poly-Bagged” with an information header or “Clam Shell” that is free standing and/or has peg hook display capability. All packaged items include barcode.

Part numbers ending with 0: The items are in bulk form which may consist of either a hangtag, reel or no packaging whatsoever. Some bulk items include a barcode. (Example: 11501 = 1150 in Packaged form. 11500 = 1150 in Bulk form).

Part numbers ending with 2: The item is a kit, or collection of otherwise individually packaged and/or bulk Seachoice items contained in a single box which is barcoded for sale as a combined unit.

Commitment To Our CustomersWe are committed to delivering premium quality products (both packaged and bulk) that appeal to consumers at a competitive price. We welcome your comments and suggestions on new products including improvement to existing Seachoice products and any other comments or suggestions.

Seachoice reserves the right to make changes in product specifications for the purpose of improvement without prior notice. Our products are sold to trade dealers only and possession of this catalog does not infer an offer to sell.

Limited WarrantySEACHOICE PRODUCTS (SEACHOICE) warrants the original consumer purchaser that SEACHOICE consumer products will be free from defective materials or workmanship, under normal use and service, for a period of one (1) year from the original purchase date.

This Warranty is void if the consumer product warranted has been damaged by accident or unreasonable use, neglect, improper service, unauthorized alteration, or other cause not arising out of defects in material or workmanship.

In no event shall SEACHOICE PRODUCTS be liable for loss of use of its consumer product nor for other incidental or consequential costs, expenses or damages incurred by any person.

During the Warranty period, your SEACHOICE product will either be repaired or it will be replaced with a like product (at SEACHOICE option) when returned prepaid and insured, with proof-of-purchase date to SEACHOICE at the address listed below

THE QUALITY CHOICE - Seachoice | Boating and Sea Life Products

Documents