The future of Indian origin texture paints - ARRCOAT

ARRCOAT - The future of Indian origin texture paints

A mini-portfolio for a wide variety of the 1st Indian manufactured ‘Marble-Powder’ - Limestone - Real Sea-Shell Pearl based texture paints

ARRCOAT A 100% Made in India product.

Reasons why your next pick should be ARRCOAT

- Is the first 100% water-proof product- The only scratch-resistant texture paint in the market- Marble-Powder based texture paint- which means a greater life, and to prove that we also give 5 years of warranty.

Technical Spec Sheet

Product Data Sheet Arrcoat Polished Plaster PP100,

PP100, PP101, PP102

Smooth, Pitted, Travertine, Dragged, KonCrete Textured,

1 Product Description

Arrcoat Polished Plaster is a natural mineral material composed of hydrated lime, crushed

marble and cement combined with special additives to control working characteristics.

Although essentially the same composition the four base powders RO1, R02, R03, R40 are

made up from different proportions of white, yellow, red and green crushed marble

powders. This means a range o’ natural stone colored finishes can be achieved without the

addition of any pigment.

2 Properties

● Natural mineral material

● Contains less VOCs

● Powders product unaffected by frost

● Pot life 4-6 hours

● Wide range of finished achievable

● Wide range of colors available

● Good workability in a wide range of site conditions

● Good water vapor permeability

● Completely noncombustible as supplied or when applied

3 Health and Safety

Arrcoat Polished Plaster is a powdered product. A dust mask should always be worn when

mixing or handling the product. The product contains hydrated lime and cement that will act

as an irritant. Wear protective clothing, gloves and eye protection. It contact occurs wash

affected areas immediately with soap and water.

4 Suitable Substrates

Arrcoat Polished Plaster can be applied to Arrcoat recommended substrates which should

be firm and true and will not crack. In our experience the best substrates to work onto are

taped and jointed plasterboard and freshly plastered walls that are fully dry.

Various Finishes

• Koncrete

• Carrara

• Parline

• Travertino

• Pitted

• Rugged

• Smoothe

• Stukko

• Kanvas

Koncrete

The Archi Concrete finish can be applied on ceilings and walls easily. ARRCOAT has aced its formula for creating it with a balanced formulation and the use of proper inerts and additives. The cutting-edge finish can be made use of in new renderings/old plasters; concrete surfaces; various absorbent mineral substrates; insulating systems; old paints or dry, compact, absorbent, mineral coatings and plasterboards.

CarraraCarrara provides an exquisite silky smooth finish with a substantial focus on its tonality. This finish has an inherent method of achieving elegant depth and bringing out the true vibrancy of its colours. Although, it is to be noted that the final appearance of this finish is dependant on the hands of the applicator who makes it possible to achieve the finishes precise tonality.  The applicator in charge could bring out anything from a lightly politer surface to a more Multi-layer effect, depending on the instructions provided.

Parline

Parline’s ‘exquisitely’ and ‘luxuriant’ are two tremendously elegant finishes with subtle sparkle or shimmer. This creates visual texture and directional effects with a low sheen. The interior surface provides with a wide range of movable and tonal effects on this finish. This helps the applicator to create a unique and visually striking wall coating with a close quartile yet subtle when viewed from a distance. 

Travertino

The Travertino finish has a light texture and a directional quality similar to that of a natural travetino stone. The surface has a sheen to it, and although it is applied in just one colour, it appears to have two or more distinct spectrum tones running through the surface. 

Pitted

Pitted is the type of finish which is rugged with a grainy appearance similar to that of a kombianiert with a less polished surface. This helps in creating an appearance and a feel of honeyed or a lightly poliert limestone. It is most effective when it is used to creating an appearance of a monolithic stone surface of a natural stone block. The Pitted finish is at its very best when in lighter or natural stone colours. 

Rugged

Inspired by the pattern of weatherliness rock, the rugged finish, is et another ARRCOAT creation both in technique and in a specialised set of tools. This creation uses the same basic ingredients of a pitted finish and the rugged grainy (semi-polished) surface which is then characterised by striations of texture running through the surface to give a stronger directional quality. 

SmootheSmoothe, a smooth polished plaster finish is similar to the marmo plaster which was historically used in northern Italy during the era of Renaissance as both an interior and an exterior wall finish. This texture was widely acclaimed after it was used as a background of DI-ORNAT Frescoes which, at that time, dominated much of the decorations. This finish is a combination of material and techniques widely regarded as Venetian plaster. It is to be noted here that the final appearance is to be credited to the hands of the applicator as she/he could help in achieving a polished surface to even introducing marmalades effects. 

StukkoStukko, is a luxurious finish pioneered by the Italians while they were improvising on the traditional Venetian technique of applying fine coats over a background of of semi-dry polish with hot iron mordant. This addition greatly improved the working characteristics cabling it to be more successful than its predecessors. Stucco finish is a unique mix of aged lime powder, micronised marble powder and specialised additives. This finish has the highest sheen in comparison with other textures. When applied in unfragmented fine layers and finished with trowel polish on a glossy surface, it possesses a remarkable sheen. 

Special Finishes - As per your Imagination / Taste / Desire

Special Finishes Part 2

Special Finishes Part 3

With a special R&D facility we always aspire to bring to you what you desire.

We speak beyond just a regular catalogue, we innovate with our materials to bring out just about any sort of finish you ask for.

A special mention to our all new product - Floor Texture Paints - a new concept in the interior world

Textured Flooring A whole new concept

www.arrcoat.com

Call now - +91 80766 89488

Thank you for your time