The Furnace Company SELAS-LINDE GmbH
The FurnaceCompany
SELAS-LINDE GmbH
3 Introduction
4 SELAS-LINDE GmbH
5 Company history
6 Pyrolysis-furnaces for ethylene production
7 EDC-cracking furnaces
8 Steam reformer
9 Refinery heaters
10 Furnaces for direct-reduction plants
11 Other furnaces
12 Environmental technology
13 Thermal oxidation
14 Submerged combustion vaporiser system
15 The main advantages of the submerged combustion Sub-X® vaporiser system
16 Contact
2
Sub-X® is a registered trademark of The Linde Group
Cover photo: ethylene furnaces
Contents.
SELAS-LINDE GmbH – a wholly-owned sub-sidiary of The Linde Group, EngineeringDivision – is one of the world‘s leadingsuppliers of process plants in the fields of:
Process furnaces for the chemical
and petrochemical industry:
– Pyrolysis furnaces for ethylene production
– EDC cracking furnaces
– Cracking furnaces for special chemicals,
such as acetic acid and freon
Reformer
– Steam reformers for hydrogen and
synthesis gas production
Fired heater units for refineries:
– Crude oil heaters
– Vacuum oil heaters
– Visbreaker
– Platformer
– HDS heaters
– Reboilers
– Superheaters
Special-purpose furnace equipment:
– Furnaces for iron direct reduction processes
– Steam superheaters
– Waste recovery units for gas turbines
Environmental technology
In addition to these fields, SELAS-LINDE is also a
leader in the design and construction of plants
for oxidizing gaseous and liquid wastes, includ-
ing waste heat recovery, flue gas treatment, by-
product recovery for:
– Halogenated hydrocarbons
– PCBs
– Pesticides
– Dioxines
– Pharmaceutical wastes
– Aqueous salt laden wastes
– Nitrogen-bound organics
Vaporisation of cryogenic fluids
Submerged combustion vaporiser system
(Sub X®) for:
– LNG
– LPG
– Nitrogen
– Ethylene
Range of Services
SELAS-LINDE GmbH offers a wide range of
services, tailored to customer specifications:
– Studies
– Project management
– Basic and detail engineering
– Procurement of services and materials
– Construction, revamp and comissioning
– Supervision of fabrication and construction
– Start-up supervision
– After-sales service
– Project financing
3
Introduction.
SELAS-LINDE has extensive experience in the
conceptual and detailed design and construction
of turn-key plants, but also offers its customers all
these services individually.
The world-wide cooperation and exchange of
information with Linde, the connection with the
SELAS-LINDE Fired Heaters Division within Linde
Impianti, Italia (LII), Rome and the sister company,
Selas Fluid Processing Corporation (SFPC), Blue
Bell, PA, USA, ensure state of the art technology
and project execution.
Efficient engineering work by experienced spe-
cialists and the use of the most modern 3D CAD
systems (PDS) result in optimal design and reliable
long-term operation of all SELAS-LINDE plants.
Materials and equipment are procured world-wide
in close cooperation with competent suppliers and
business associates.
SELAS-LINDE has decades of experience as a
general contractor managing the complex logistics
of plant procurement and construction. Proven
project management and control systems guaran-
tee strict adherence to cost, schedule and quality
requirements.
Contracts are executed in compliance with all
relevant international standards and rules, accom-
panied by continuous quality-assurance activities.
SELAS-LINDE is certified under ISO 9001 since
February 2000.
After a contract has been completed, SELAS-LINDE
remains a reliable partner for its customers, with
its flexible and efficient after-sales service.
Proof of SELAS-LINDE‘s capability and know-how
is the successful completion and commissioning
of more than 2000 plants since the foundation of
this company.
Ethylene cracking furnace, Jilin Petrochemical Company,
Jilin/China
SELAS-LINDE GmbH.
4
SELAS-LINDE has a long tradition in furnace
design, which dates back to the early thirties
in the USA.
The original company, Selas Corporation of
America (in Pennsylvania), was involved in the
technology of „fired process furnaces“ from an
early date and developed this technology con-
tinuously.
Starting in 1948, the company of Ernst Kirchner
in Hamburg was developing its product line for
„fired industrial furnaces“. After the death of the
company‘s founder in 1970, the „fired industrial
furnaces“ section was separated and sold to
Selas Corporation of America. This acquisition
was then renamed to Selas-Kirchner GmbH.
In 1973, Selas Corporation of America and
Linde AG, Process Engineering and Contracting
Division signed a license agreement for the
planning, manufacturing, and erection of pyro-
lysis furnaces for producing olefins. This also
meant that the Selas, Kirchner, and Linde tech-
nologies in the field of „fired process-furnace
plants for the chemical and refinery industries“
were combined.
Over the following years, step by step Linde´s
Process Engineering and Contracting Division
acquired ever larger shares of Selas-Kirchner
and of the „fired process-furnace plant“ division
of Selas Corporation of America.
In 1985, Linde AG became the sole owner of
Selas-Kirchner, Germany, and of the „Process
Furnaces“ division of Selas Corporation. This
division now operates under the name Selas
Fluid Processing Corporation (SFPC) in Blue
Bell, USA.
On January 1st, 1999, Selas-Kirchner GmbH was
renamed to SELAS-LINDE GmbH.
SELAS-LINDE GmbH and Selas Fluid Processing
Corporation now market the entire know-how of
the Selas, Kirchner and Linde furnace technolo-
gies exclusively throughout the world under the
trademark „Selas“.
Since its acquisition of T-Thermal in 1992, SELAS-
LINDE possesses the extensive know-how and
leading technology for thermal oxidation of
gaseous and liquid wastes, in addition to its
already available technology in the field of en-
vironmental engineering.
Furthermore SELAS-LINDE designs, supplies and
constructs plants for the vaporisation of cryo-
genic liquids. Today SELAS-LINDE is one of the
leading global contractors in all above men-
tioned fields.
Selas Fluid Processing Corp.
and T-Thermal Division
Philadelphia, USA
Bertrams Heatec AG
Pratteln, Switzerland
SELAS-LINDE GmbH
and T-Thermal Division
SELAS LINDE GmbH
T-Thermal Division
within Linde Cryogenics
Munich, Germany
Aldershot, UK
Fired Heater Division
within Linde Impianti
(License of SL)
Rome, Italy
Linde AG
Engineering Division
Munich, Germany
5
Company history.
In ethylene plants, the pyrolysis or ethylene
cracking furnaces are the key elements for pro-
duction of the basic chemicals ethylene, propy-
lene, butadiene, etc. for the plastics industry.
In designing such cracking furnaces based upon
Linde´s PYROCRACK® technology, SELAS-LINDE
can draw from its experience of more than 450
cracking furnaces built.
Furnace group in Gofer, Germany Ethylene cracking furnace, Elenac, Wesseling/Germany
Pyrolysis-furnaces forethylene production.
6
Depending on available feedstocks and desired
product distribution the appropriate PYRO-
CRACK® cracking coil system will be chosen.
The design features vertically arranged coils,
for high product output, long furnace runtime
and robust mechanical design.
Firing is by a pure bottom-/sidewall, or com-
bined sidewall and bottom burner arrangement.
Integrated fluegas heat recovery allows furnace
efficiencies of over 92 %.
Vinyl chloride (VCM) is one of the most impor-
tant monomers for manufacturing a wide range
of polymers today.
The vinyl chloride monomer is produced by ther-
mal cracking of ethylene dichloride (EDC) in a
tubular furnace at temperatures of about 500°C
and pressures of up to 30 bar.
SELAS-LINDE has designed and built EDC crack-
ing furnaces for the various processes, such as
Goodrich, Stauffer, DOW, EVC, PPG, Hoechst,
and Atochem throughout the world.
The coils and the fire box are designed by means
of a special computer model for the reaction
kinetics. This allows the furnace design to be
optimized with respect to the temperature/heat
flux profile, residence time and pressure loss,
taking both main and secondary reactions into
account.
The EDC furnaces are fired by natural-draft or
forced-draft sidewall burners.
The residual heat of the flue gases is utilized for
generating steam or preheating the air, so that
efficiencies of over 90 % can be achieved.
EDC cracking furnace DOW-BSL, Schkopau
EDC cracking furnace, fire box
7
EDC-cracking furnaces.
Many processes in the chemical industry are
based on the use of hydrogen or synthesis gas.
The most important industrial method of gen-
erating hydrogen and synthesis gas is steam
reforming from hydrocarbons. This is carried
out in top-fired primary reformers.
The SELAS-LINDE experience in designing and
building reforming furnaces dates back to 1957.
SELAS-LINDE has developed a special reaction
model of the reforming process for designing
reformers. This computer program enables the
composition of the reformed gas to be calcu-
lated, and the firebox to be dimensioned for a
wide range of feedstock.
Steam reformer, Linde AG, Leuna/Germany Steam reformer, AGIP, Milazzo/Italy
Steam reformer.
8
The design of the waste-heat recovery system
for the flue and process gases takes into account
the customers‘s specific requirements, and
allows furnace efficiencies of over 92 %.
99
Refinery heaters.
All major processes in refineries require the
heating and sometimes vaporisation of the
hydrocarbons in direct fired heaters.
SELAS-LINDE has more than sixty years of ex-
perience in designing and building refinery
furnaces, and has constructed more than
450 furnaces around the world.
Refinery heaters are designed according to the
requirements of the process, for pressures ran-
ging from 0.05 to 150 bar, and temperatures
from 200°C to 900°C. The furnaces of SELAS-
LINDE range in fired duties from 3 MW to more
than 100 MW.
The furnaces are single-cell and double-cell box
and cylindrical types. They are fired by natural-
draft or forced-draft bottom or sidewall burners.
Efficiencies of over 90 % are achieved by means
of preheating of the air and/or hot oil, or by
steam generation.
Raffinery-heater, ERM,
Mannheim/Germany
9
The demand for sponge iron (DRI = direct re-
duced iron) as the feedstock for steel produc-
tion in electric melting furnaces is growing.
SELAS-LINDE supplies reducing-gas heaters
tailored to the specific process for the newly
developed methods of direct reduction
(Finmet, Circored, Midrex plant using COREX
gas, Danarex, Hylsamex).
CircoredDRI is made in a circulating and a stationary
fluidized bed, using almost pure hydrogen.
SELAS-LINDE supplied the three reducing-gas
heaters for the first industrial-scale plant using
this technology.
FinmetDRI is made in four stationary fluidized-bed
reactors, using a mixture of hydrogen and car-
bon monoxide. The reducing gas is heated from
a minimum of 50°C to a maximum of 935°C.
Midrex plant using COREX gasDRI is made in a conventional Midrex shaft,
but using purified COREX gas as the reducing
gas, which is a mixture of hydrogen and carbon
monoxide.
A tail gas from another part of the plant with an
extremely low heat value, that would otherwise
have to be flared off, can be used to preheat the
reducing gas. This provides a considerable in-
crease in the overall efficiency of the process.
HYL/Danieli
The DR iron will be produced in a reactor. The
reduction gas consists of a mixture between
H2 and CO and will be heated up to 930°C in a
reduction process gas heater. For generating
the reduction gas a syngas reformer including
the waste heat recovery section will be used;
the complete reformer and waste heat recovery
unit will be also supplied by SELAS-LINDE.
Reduction gas heater, Abu Dhabi/V.A.E.
Reduction gas heater and reformer plant,
Abu Dhabi/V.A.E.Furnaces fordirect-reduction plants.
Steam superheater furnaces for styrene plantsWhen dehydrogenating ethylbenzene to styrene,
process steam is superheated to about 800°C in
a furnace before being fed into the dehydrogen-
ation reactor together with the ethylbenzene.
The furnace is of double-cell construction with
a common convection zone to utilize the waste
heat.
The tube system is gas fired from both sides
by means of natural-draft or forced-draft floor
burners.
Gas-turbine waste-heat unitsThis method combines gas-turbine operation
with that of a conventional refinery furnace.
This combination provides an alternative use for
the exhaust from the gas turbine. Depending
on process requirements, this type of plant can
also be built with auxiliary firing equipment.
The exhaust gases from a gas turbine are used
in the horizontal waste-heat train to heat and
partially vaporize crude oil in several tube
bundles connected in series, and also to heat
process water.
Steam superheater, Hüls AG, Marl/Germany
Other furnaces.
11
The SELAS-LINDE/T-Thermal environmental tech-
nology serves to dispose of almost all kinds of
gaseous and liquid pollutants, particularly halo-
genated hydrocarbons and salt laden aqueous
wastes.
SELAS-LINDE/T-Thermal has many years of ex-
perience in designing and building incinerators
for treating waste materials from the following
industries:
– Pharmaceutical industry
– Chemical industry
– Refineries
– Pesticides industry
– Plastics industry
Thermal oxidation unit for aqueous wastes,
pharmaceutical industry/Portugal
12
Environmental technology.Typical plants consist of vertically or horizontally
arranged combustion chambers with T-Thermal
LV vortex burners and Sub-X quench systems,
plus sections for heat recovery, fluegas treat-
ment, or by-product recovery, depending on the
application. SELAS-LINDE/T-Thermal can call on
more than forty years experience in building
more than 500 plants.
Thermal oxidation unit for organic and
aqueous waste liquid, Böhlen/Germany
A pollution free environment
SELAS-LINDE has commited as a company, to
provide the equipment, service and technical
support to resolve complex disposal problems.
By tailor-made combustion technology, SELAS-
LINDE can safely destroy nearly any kind of
liquid and gaseous effluent encountered in
industry.
Since building our first thermal waste oxidation
system in 1952, we have supplied over 500 in-
stallations world-wide to many of the leading
process and manufacturing companies. In a
technology where experience and expertise are
critical, SELAS-LINDE is an acknowledged world
leader.
Guaranteed destruction efficienciesThermal oxidation is the most direct, efficient,
complete and final method for the disposal of
especially hazardous liquid and gaseous indus-
trial effluent. For some wastes it is the only
practicable solution.
Destruction efficiencies of SELAS-LINDE waste
oxidation systems are guaranteed to meet Euro-
pean legislation or exceed the most demanding
requirements anywhere in the world. We have
successfully dealt with virtually every kind of
hazardous and toxic waste. One example among
many, a specially designed thermal system was
selected for the US Army program to destroy the
nation’s stockpile of obsolete chemical weap-
ons, including nerve agents. A destruction effi-
ciency of 99.999999 % was achieved.
Test burns facility SELAS-LINDE can offer a test burn facility using a
fully equipped and functional pilot test plant at
our sister company’s site at SELAS FLUID Corpora-
tion, in Conshohocken, USA. The test enables
SELAS-LINDE and their clients to pin down all the
clean, complete chemical waste disposal through
thermal oxidation variables of a proposed system
and eliminates any potential problems. The doc-
umented test results are an essential big help in
subsequent regulatory permitting. The test facility
is one of the very few approved by the US EPA
for hazardous waste testing.
Thermal oxidation.
13
Since the invention, patent and installation
of the first submerged combustion vaporiser
system (Sub-X®) design unit by T-Thermal at
Alabama Gas in 1965, and after acquisition of
T-Thermal in 1992, SELAS-LINDE has continued
to develop and supply a range of specialised
units for heating and vaporisation of cryogenic
fluids such as LNG, LPG, liquid nitrogen, oxygen
ammonia and ethylene. The technology has
been applied in LNG terminals world-wide, for
both base-load and peak-shaving duties.
SELAS-LINDE is the global market leader in the
supply of submerged combustion vaporiser
system.
The Sub-X® vaporiser is an assemblyof the following major components:– Vaporiser tank constructed in epoxy-coated
carbon steel, stainless steel or concrete
– Sub-X® burner complete with distribution
duct and tubes
– Process tube coil
– Weir assembly
– Combustion air fan, motor, inlet and outlet
silencer and accustic housing as required
– Control panel and instrumentation package
for hazardous area classification
– Optional cogeneration hot water distribution
system
LNG vaporisers, Belgium
Submerged combustion vaporiser system.
14
Operational safetyThe process tubes are submerged in a water bath
and hence the tube wall temperature be maxi-
mum 55°C. No possible flame imingement with
LNG contact.
High thermal efficiencyWith high heat flux and narrow temperature
approach, high gross thermal effiencies,
approaching 100 %, can be achieved.
Fast responseRapid start-up and shut-down without process
upset. It is possible, if required, to have the unit
standing by on pilot only, prior to the introduc-
tion of the process fluid.
Heat transfer rateThe bubble formation by direct contact heating
and use of a patented weir arrangement pro-
vides a high level of turbulence and excellent
recirculation over tubes containing the cryo-
genic fluid, thus maintaining temperature uni-
formity. Observations of units operations have
indicated no ice build-up, even when operating
with low bath temperatures.
LNG vaporiser for base-load plant/USA
15
Main advantages of the submerged combustion Sub-X® vaporiser system.
High operational reliabilityThis can only be measured by the cumulative
experience gained in the operation of these
units. With the exception of facilities that have
closed, all Sub-X LNG vaporisers installed since
1965 are still in operation.
Environmental impactThese units are designed to meet the new regu-
latory pressure with very low NOx emission va-
lues.
SELAS-LINDE GmbH – Range of activities.
SL/
1.1.
e/09
SELAS-LINDE GmbHWolfratshauser Str. 138, 82049 Pullach, Germany
Phone +49.89.7447.47-0, Fax +49.89.7447.47-17
E-Mail: [email protected], www.selas-linde.com
Offices/Subsidiaries
T-Thermal & Process Heater Technology
c/o Linde CryoPlants Ltd.
1 Blackwater Park, Holder Road
Aldershot, Hants GU12 4PQ
Great Britain
Phone: +44.1252.321-811
Fax: +44.1252.321-355
SELAS-LINDE Fired Heaters Divsion
c/o Linde Impianti Italia S.p.A.
Via Corona Boreale, 86
00054 Fiumicino, Roma
Italy
Phone: +39.06656.13-1
Fax: +39.06656.13-200
Selas Fluid Processing Corporation
T-Thermal Company/Thermatrix
Five Sentry Parkway East, Suite 204
Blue Bell, Philadelphia 19422
United States of America
Phone: +1.610.8340-300
Fax: +1.610.8340-473
Process furnaces for the chemical and petrochemical industry– Pyrolysis furnaces for ethylene production
– EDC cracking furnaces
– Cracking furnaces for special chemicals,
such as acetic acid and freon
Reformer– Steam reformers for hydrogen
and synthesis gas production
Fired heater units for refineries– Crude oil heaters
– Vacuum oil heaters
– Visbreaker
– Platformer
– HDS heaters
– Reboilers
– Superheaters
Special-purpose furnace equipment– Furnaces for iron direct reduction processes
– Steam superheaters
– Waste recovery units for gas turbines
Environmental TechnologyPlants for oxidizing gaseous and liquid wastes, including waste heat
recovery, flue gas treatment, byproduct recovery for:
– Halogenated hydrocarbons
– PCBs
– Pesticides
– Dioxines
– Pharmaceutical wastes
– Aqueous salt laden wastes
– Nitrogen-bound organics
Vaporisation of cryogenic fluidsSubmerged combustion vaporiser system (Sub X®) for:
– LNG
– LPG
– Nitrogen
– Ethylene