CATERPILLAR MACHINE PRICE LIST WT-MG MOTOR GRADER WORK TOOLS Ship Weight List Price lbs At Factory Standard Equipment: This WT-MG Price List consists of Work Tools for 120 through 16 Motor Graders. Please use the following 0P number when ordering loose Work Tools for Motor Graders: Snow Removal Products for Motor Grader for Americas North Cat Snow Wings for Motor Graders - Key Features (GEHQ0233) Cat Snow Plows for Motor Graders - Key Features (GEHQ0234) Cat Snow blades for Motor Graders - Key Features (GEHQ0235) Balderson- Lift Groups for Cat Motor Graders - Key Features (GEHQ0236) Caterpillar Work Tools Price Pages 1-2-19 - WT-MG The Educational Services Commission of New Jersey NJ State Approved Co-op #65MCESCCPS Grounds Equipment Bid #ESCNJ 18/19-25 1 Bid Term: 2/20/19 - 2/19/21
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
CATERPILLAR MACHINE PRICE LIST
WT-MG
MOTOR GRADER WORK TOOLS Ship Weight List Price
lbs At Factory
Standard Equipment:
This WT-MG Price List consists of WorkTools for 120 through 16 Motor Graders.Please use the following 0P numberwhen ordering loose Work Tools forMotor Graders:
Snow Removal Products for Motor Graderfor Americas North
Cat Snow Wings for Motor Graders- Key Features (GEHQ0233)Cat Snow Plows for Motor Graders- Key Features (GEHQ0234)Cat Snow blades for Motor Graders- Key Features (GEHQ0235)Balderson- Lift Groups for CatMotor Graders- Key Features (GEHQ0236)
Caterpillar Work Tools Price Pages 1-2-19 - WT-MGThe Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25
1 Bid Term: 2/20/19 - 2/19/21
0P-0674 MOTOR GRADER WORK TOOLS 0 NC...............................
PLEASE USE THE 0P REFERENCE NUMBER LISTED ABOVE WHEN ORDERING.
FOR QUESTIONS, SUPPORT AND QUOTATIONSPLEASE CONTACT THE SALES SUPPORT TEAM INAMERICAS NORTH VIA EMAIL AT [email protected]
0P-0210Please use this packing code to orders from this Price List.
Supersedes 02JAN2018 Subject to change without notice Effective 02JAN2019Printed in USACaterpillar: Confidential Green
US-A-19-01 A U. S. DOLLAR CURRENCY WT-MG-001
Caterpillar Work Tools Price Pages 1-2-19 - WT-MGThe Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25
2 Bid Term: 2/20/19 - 2/19/21
CATERPILLAR MACHINE PRICE LIST
WT-MG
REF Ship Weight List Price
USE NO. lbs At FactoryCATERPILLAR WORK TOOLS
12M/120M MOTOR GRADER
12M/120M BLADES
ANGLE SNOW BLADES
W 524-6852 BLD 132 HYD ANG 2.0HPL 2,875 $17,975 NI...........................
BLADE HEIGHT: 40" (1016)REQUIRES: Lift Group, Manual 2"ONE AVAILABLE HYDRAULIC FUNCTIONS (e.g. DA1)"CANADIAN DEALERS REFERENCE WT-CADSNW PRICE LIST"
STRAIGHT BLADES
W 524-6868 BLD 112 STRAIGHT 1.5HPL 1,729 $8,628 NI...........................
BLADE HEIGHT: 40" (1016)REQUIRES: Lift Group, Manual 1.5", or Lift Group, Hydraulic 1.5""CANADIAN DEALERS REFERENCE WT-CADSNW PRICE LIST"
W 524-6869 BLD 112 STRAIGHT 2.0HPL 1,681 $8,628 NI...........................
BLADE HEIGHT: 40" (1016)REQUIRES: Lift Group, Manual 2""CANADIAN DEALERS REFERENCE WT-CADSNW PRICE LIST"
12M/120M LIFT GROUPS
W 306-3024 LIFT GROUP, HYDRAULIC 1.5" 1,600 $12,100 NI.........................
Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & ServicesHydraulic locking pins (includes diverter valve to actuate
hydraulic locking pins)REQUIRES: Front lift function (includes the front lift lines)
and 359-3925 factory mountingW 293-5556 LIFT GROUP, MANUAL 1.5" 1,600 $8,415 NI...........................
Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & ServicesREQUIRES: Front lift function (includes the front lift lines)
and 359-3925 factory mounting
W 540-1617 LIFT GROUP, HYDRAULIC, 2" 1,510 $8,746 NI.........................
Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & ServicesREQUIRES: Front lift function (includes the front lift lines)
and 359-3925 factory mounting
12M/120M SCARIFIERS
W 212-6232 SCARIFIER, FRONT V-TYPE 1.5HPL 865 $4,542 NI........................
Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & ServicesINCLUDES: 5 teethREQUIRES: Lift Group, Manual 1.5", or Lift Group, Hydraulic 1.5"
Supersedes 02JAN2018 Subject to change without notice Effective 02JAN2019Printed in USACaterpillar: Confidential Green
US-A-19-01 A U. S. DOLLAR CURRENCY WT-MG-002
Caterpillar Work Tools Price Pages 1-2-19 - WT-MGThe Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25
3 Bid Term: 2/20/19 - 2/19/21
CATERPILLAR MACHINE PRICE LIST
WT-MG
REF Ship Weight List Price
USE NO. lbs At FactoryCATERPILLAR WORK TOOLS
12M/120M MOTOR GRADER (CONT.)
12M/120M SCARIFIERS (Cont.)
W 212-6231 SCARIFIER, FRONT V-TYPE 1.5HPL 956 $4,990 NI........................
Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & ServicesINCLUDES: 11 teethREQUIRES: Lift Group, Manual 1.5", or Lift Group, Hydraulic 1.5"
12M/120M MID-MOUNTED
W 310-9425 SCARIFIER, MID-MOUNT V-TYPE 1,945 $14,747 NI.......................
INCLUDES: 11 teethREQUIRES: Bracket 252-0931 and hose assembly 311-1508 to be
installed on machine at factory or310-9452 purchased loose from CWTS.
CAN NOT BE USED WITH: Front Fenders installed or front axle
W 310-9452 KIT, NON-FRAME READY MID MOUNT 200 $1,542 NI.....................
INCLUDES: Mounting bracket and lines groupFOR USE WITH: M1 SERIES MOTOR GRADERS WITH TUBE STYLE FRONT FRAME ONLY
12M/120M SNOW REMOVAL
PLOWS
ONE-WAY PLOWS
W 230-7097 PLOW, 144 ONE-WAY SNOW 1,940 $12,885 NI.........................
HEIGHT: 67"(1702mm)REQUIRES: Lift Group, Manual 1.5", or Lift Group, Hydraulic 1.5"
V PLOWS
W 230-7088 BLD, 104 V-PLOW 1.5HPL 2,240 $11,881 NI............................
HEIGHT: 79"(2007mm)REQUIRES: Lift Group, Manual 1.5", or Lift Group, Hydraulic 1.5"
W 524-6839 BLD 104 V-PLOW 2.0HPL 2,900 $14,811 NI............................
HEIGHT: 69" (1748mm)REQUIRES: Lift Group, Manual 2""CANADIAN DEALERS REFERENCE WT-CADSNW PRICE LIST"
Supersedes 02JAN2018 Subject to change without notice Effective 02JAN2019Printed in USACaterpillar: Confidential Green
US-A-19-01 A U. S. DOLLAR CURRENCY WT-MG-003
Caterpillar Work Tools Price Pages 1-2-19 - WT-MGThe Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25
4 Bid Term: 2/20/19 - 2/19/21
CATERPILLAR MACHINE PRICE LIST
WT-MG
REF Ship Weight List Price
USE NO. lbs At FactoryCATERPILLAR WORK TOOLS
12M/120M MOTOR GRADER (CONT.)
12M/120M SNOW REMOVAL (Cont.)
PLOW HOOKS
W 230-7093 HOOK, V-PLOW 1.5HPL 42 $282 NI.................................
Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & ServicesFOR USE WITH: 1.5HPL Lift GroupREQUIRES: quantity 2
ANGLE SNOW BLADE
W 524-6844 BLD 144 HYD ANG SNW TRP 1.5HPL 3,004 $13,949 NI...................
BLADE HEIGHT: 42" (1067mm)REQUIRES: Lift Group, Manual 1.5", or Lift Group, Hydraulic 1.5"
ONE AVAILABLE HYDRAULIC FUNCTIONS (e.g. DA1)"CANADIAN DEALERS REFERENCE WT-CADSNW PRICE LIST"
U/V ANGLE BLADES
120M
W 524-6862 BLD 144 U/V ANG 2.0HPL 2,705 $28,758 NI...........................
BLADE HEIGHT: 40" (1016mm)REQUIRES: Lift Group, Manual 2"
TWO AVAILABLE HYDRAULIC FUNCTIONS (e.g. DA1 & DA2)"CANADIAN DEALERS REFERENCE WT-CADSNW PRICE LIST"
Supersedes 02JAN2018 Subject to change without notice Effective 02JAN2019Printed in USACaterpillar: Confidential Green
US-A-19-01 A U. S. DOLLAR CURRENCY WT-MG-004
Caterpillar Work Tools Price Pages 1-2-19 - WT-MGThe Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25
5 Bid Term: 2/20/19 - 2/19/21
CATERPILLAR MACHINE PRICE LIST
WT-MG
REF Ship Weight List Price
USE NO. lbs At FactoryCATERPILLAR WORK TOOLS
12M/120M MOTOR GRADER (CONT.)
U/V ANGLE BLADES (Cont.)
12M
W 524-6862 BLD 144 U/V ANG 2.0HPL 2,705 $28,758 NI...........................
BLADE HEIGHT: 40" (1016mm)REQUIRES: Lift Group, Manual 2"
TWO AVAILABLE HYDRAULIC FUNCTIONS (e.g. DA1 & DA2)
120M2 WINGS
MASTED ARRANGEMENTS
HYDRAULIC REAR BRACE HEIGHT ADJUSTMENT WINGS
W 397-7571 WING 144/60 BM HYD HGHT ADJ M 3,655 $22,015 NI...................
HEIGHT: 40" (1018mm)FOR USE WITH: M2 AND M3 SERIES MOTOR GRADERS ONLY!!!REQUIRES: 3 Valves and ripper lines
12M2 and 12M3 WINGS
HYDRAULIC REAR BRACE HEIGHT ADJUSTMENT WINGS
W 483-5950 WING 144/60 BM HYD HGHT ADJ M 3,651 $24,054 NI...................
MAX BLADE HEIGHT: 40" (1018mm)FOR USE WITH: M2 AND M3 SERIES MOTOR GRADERS ONLY!!!REQUIRES: 3 Valves and ripper lines
W 483-5951 WING 168/60 BM HYD HGHT ADJ M 3,790 $25,961 NI...................
MAX BLADE HEIGHT: 42" (1053mm)FOR USE WITH: M2 AND M3 SERIES MOTOR GRADERS ONLY!!!REQUIRES: 3 Valves and ripper lines
MANUAL REAR BRACE HEIGHT ADJUSTMENT WINGS
W 483-5952 WING 144/60 BM MAN HGHT ADJ M 3,543 $21,413 NI..................
MAX BLADE HEIGHT: 40" (1018mm)FOR USE WITH: M2 AND M3 SERIES MOTOR GRADERS ONLY!!!REQUIRES: 2 Valves
RIPPER HEIGHT ADJUSTMENT WINGS
Supersedes 02JAN2018 Subject to change without notice Effective 02JAN2019Printed in USACaterpillar: Confidential Green
US-A-19-01 A U. S. DOLLAR CURRENCY WT-MG-005
Caterpillar Work Tools Price Pages 1-2-19 - WT-MGThe Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25
6 Bid Term: 2/20/19 - 2/19/21
CATERPILLAR MACHINE PRICE LIST
WT-MG
REF Ship Weight List Price
USE NO. lbs At FactoryCATERPILLAR WORK TOOLS
12M/120M MOTOR GRADER (CONT.)
12M2 and 12M3 WINGS (Cont.)
W 483-5954 WING 144/60 RM RIP HGHT ADJ M 3,018 $20,256 NI....................
MAX BLADE HEIGHT: 40" (1018mm)FOR USE WITH: M2 AND M3 SERIES MOTOR GRADERS ONLY!!!REQUIRES: 2 Valves and Ripper
W 483-5955 WING 168/60 RM RIP HGHT ADJ M 3,157 $20,749 NI....................
HEIGHT: 42" (1053mm)FOR USE WITH: M2 AND M3 SERIES MOTOR GRADERS ONLY!!!REQUIRES: 2 Valves and Ripper
RIPPER MOUNT MANUAL REAR BRACE ADJUSTMENT WINGS
W 483-5956 WING 144/60 RM MAN HGHT ADJ M 3,153 $20,256 NI..................
MAX BLADE HEIGHT: 40" (1018mm)FOR USE WITH: M2 AND M3 SERIES MOTOR GRADERS ONLY!!!REQUIRES: 2 Valves
W 483-5957 WING 168/60 RM MAN HGHT ADJ M 3,292 $21,840 NI...................
MAX BLADE HEIGHT: 42" (1053mm)FOR USE WITH: M2 AND M3 SERIES MOTOR GRADERS ONLY!!!REQUIRES: 2 Valves
MASTLESS ARRANGEMENTS: MANUAL PUSH POLE
W 517-7339 WING 144/40 RM FIXED 3,545 $20,850 NI.............................
MAX BLADE HEIGHT: 44" (1118mm)BENCH HEIGHT: 40" (1016MM)REQUIRES: 2 AVAILABLE VALVES: WM AND WT+FLOAT
Mount, Snow Wing, Frame Ready OR Snow Arrangement"CANADIAN DEALERS REFERENCE WT-CADSNW PRICE LIST"
W 517-7340 WING 144/40 BM FIXED 3,826 $20,850 NI.............................
MAX BLADE HEIGHT: 44" (1118mm)BENCH HEIGHT: 40" (1016MM)REQUIRES: 2 AVAILABLE VALVES: WM AND WT+FLOAT
Mount, Snow Wing, Frame Ready OR Snow Arrangement"CANADIAN DEALERS REFERENCE WT-CADSNW PRICE LIST"
MASTLESS ARRANGEMENTS: HYDRAULIC PUSH POLE
Supersedes 02JAN2018 Subject to change without notice Effective 02JAN2019Printed in USACaterpillar: Confidential Green
US-A-19-01 A U. S. DOLLAR CURRENCY WT-MG-006
Caterpillar Work Tools Price Pages 1-2-19 - WT-MGThe Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25
7 Bid Term: 2/20/19 - 2/19/21
CATERPILLAR MACHINE PRICE LIST
WT-MG
REF Ship Weight List Price
USE NO. lbs At FactoryCATERPILLAR WORK TOOLS
12M/120M MOTOR GRADER (CONT.)
MASTLESS ARRANGEMENTS: MANUAL PUSH POLE (Cont.)
W 517-7341 WING 144/40 RM FIXED 3,632 $23,726 NI.............................
INCLUDES HYDRAULIC PUSH POLEMAX BLADE HEIGHT: 44" (1118mm)BENCH HEIGHT: 40" (1016MM)REQUIRES: 3 AVAILABLE VALVES: WM, WT+FLOAT, and RIP with additional
ripper linesMount, Snow Wing, Frame Ready OR Snow Arrangement
"CANADIAN DEALERS REFERENCE WT-CADSNW PRICE LIST"
W 517-7342 WING 144/40 BM FIXED 3,963 $23,726 NI.............................
INCLUDES HYDRAULIC PUSH POLEMAX BLADE HEIGHT: 44" (1118mm)BENCH HEIGHT: 40" (1016MM)REQUIRES: 3 AVAILABLE VALVES: WM, WT+FLOAT, and RIP with additional
ripper linesMount, Snow Wing, Frame Ready OR Snow Arrangement
"CANADIAN DEALERS REFERENCE WT-CADSNW PRICE LIST"
12M1/120M1 WINGS
HYDRAULIC REAR BRACE HEIGHT ADJUSTMENT WINGS
W 275-5900 WING 144/60 BM HYD HGHT ADJ M 3,733 $22,015 NI...................
HEIGHT: 38"(965)FOR USE WITH: M1 SERIES MOTOR GRADERS ONLY!!!REQUIRES: 3 valves
CONVERSION KITS CONVERTING H SERIES WINGS TO M1 SERIES MACHINES
W 307-6356 KIT, H-TO-M CONVERSION 945 $5,758 NI.............................
FOR USE WITH: Kit for hydraulic rear brace height adjustment models
140M/160M MOTOR GRADER
140M/160M
ANGLE SNOW BLADES
W 524-6852 BLD 132 HYD ANG 2.0HPL 2,875 $17,975 NI...........................
BLADE HEIGHT: 40" (1016)REQUIRES: Lift Group, Manual 2"ONE AVAILABLE HYDRAULIC FUNCTIONS (e.g. DA1)
Supersedes 02JAN2018 Subject to change without notice Effective 02JAN2019Printed in USACaterpillar: Confidential Green
US-A-19-01 A U. S. DOLLAR CURRENCY WT-MG-007
Caterpillar Work Tools Price Pages 1-2-19 - WT-MGThe Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25
8 Bid Term: 2/20/19 - 2/19/21
CATERPILLAR MACHINE PRICE LIST
WT-MG
REF Ship Weight List Price
USE NO. lbs At FactoryCATERPILLAR WORK TOOLS
140M/160M MOTOR GRADER (CONT.)
140M/160M (Cont.)
STRAIGHT BLADES
W 524-6868 BLD 112 STRAIGHT 1.5HPL 1,729 $8,628 NI...........................
BLADE HEIGHT: 40" (1016)REQUIRES: Lift Group, Manual 1.5", or Lift Group, Hydraulic 1.5"
W 524-6869 BLD 112 STRAIGHT 2.0HPL 1,681 $8,628 NI...........................
BLADE HEIGHT: 40" (1016)REQUIRES: Lift Group, Manual 2"
140M/160M LIFT GROUPS
W 306-3024 LIFT GROUP, HYDRAULIC 1.5" 1,600 $12,100 NI.........................
Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & ServicesHydraulic locking pins (includes diverter valve to accuate
hydraulic locking pins)REQUIRES: Front lift function (includes the front lift lines)
and 359-3925 factory mounting
W 293-5556 LIFT GROUP, MANUAL 1.5" 1,600 $8,415 NI...........................
Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & ServicesREQUIRES: Front lift function (includes the front lift lines)
and 359-3925 factory mounting
W 540-1617 LIFT GROUP, HYDRAULIC, 2" 1,510 $8,746 NI.........................
Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & ServicesREQUIRES: Front lift function (includes the front lift lines)
and 359-3925 factory mounting
140M/160M SCARIFIERS
W 212-6232 SCARIFIER, FRONT V-TYPE 1.5HPL 865 $4,542 NI........................
Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & ServicesINCLUDES: 5 teethREQUIRES: Lift Group, Manual 1.5", or Lift Group, Hydraulic 1.5"
W 212-6231 SCARIFIER, FRONT V-TYPE 1.5HPL 956 $4,990 NI........................
Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & ServicesINCLUDES: 11 teethREQUIRES: Lift Group, Manual 1.5", or Lift Group, Hydraulic 1.5"
Supersedes 02JAN2018 Subject to change without notice Effective 02JAN2019Printed in USACaterpillar: Confidential Green
US-A-19-01 A U. S. DOLLAR CURRENCY WT-MG-008
Caterpillar Work Tools Price Pages 1-2-19 - WT-MGThe Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25
9 Bid Term: 2/20/19 - 2/19/21
CATERPILLAR MACHINE PRICE LIST
WT-MG
REF Ship Weight List Price
USE NO. lbs At FactoryCATERPILLAR WORK TOOLS
140M/160M MOTOR GRADER (CONT.)
140M/160M MID-MOUNTED
W 310-9425 SCARIFIER, MID-MOUNT V-TYPE 1,945 $14,747 NI.......................
INCLUDES: 11 teethREQUIRES: Bracket 256-0783 and hose assembly 309-6989 to be
installed on machine at factory or310-9451 purchased loose from CWTS.
CAN NOT BE USED WITH: Front Fenders installed or front axle.
W 310-9451 KIT, NON-FRAME READY MID MOUNT 160 $1,542 NI.....................
INCLUDES: Mounting bracket and lines groupFOR USE WITH: M1 SERIES MOTOR GRADERS WITH TUBE STYLE FRONT FRAME ONLY
140M/160M SNOW REMOVAL
PLOWS
ONE-WAY PLOWS
W 230-7097 PLOW, 144 ONE-WAY SNOW 1,940 $12,885 NI.........................
HEIGHT: 67"(1702mm)REQUIRES: Lift Group, Manual 1.5", or Lift Group, Hydraulic 1.5"
V-PLOWS
W 230-7098 BLD 117 V-PLOW 1.5HPL 2,400 $12,614 NI.............................
Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & ServicesHEIGHT: 82"(2083mm)REQUIRES: Lift Group, Manual 1.5", or Lift Group, Hydraulic 1.5"
W 448-2847 BLD 117 V-PLOW 2.0HPL 2,400 $12,614 NI............................
HEIGHT: 82" (2083mm)REQUIRES: Lift Group, Manual 2"
W 524-6839 BLD 104 V-PLOW 2.0HPL 2,900 $14,811 NI............................
HEIGHT: 69" (1748mm)REQUIRES: Lift Group, Manual 2"
PLOW HOOK
W 230-7093 HOOK, V-PLOW 1.5HPL 42 $282 NI.................................
Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & ServicesREQUIRES: quantity 2
ANGLE SNOW BLADES
Supersedes 02JAN2018 Subject to change without notice Effective 02JAN2019Printed in USACaterpillar: Confidential Green
US-A-19-01 A U. S. DOLLAR CURRENCY WT-MG-009
Caterpillar Work Tools Price Pages 1-2-19 - WT-MGThe Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25
10 Bid Term: 2/20/19 - 2/19/21
CATERPILLAR MACHINE PRICE LIST
WT-MG
REF Ship Weight List Price
USE NO. lbs At FactoryCATERPILLAR WORK TOOLS
140M/160M MOTOR GRADER (CONT.)
140M/160M SNOW REMOVAL (Cont.)
W 524-6844 BLD 144 HYD ANG SNW TRP 1.5HPL 3,004 $13,949 NI...................
BLADE HEIGHT: 42" (1067mm)REQUIRES: Lift Group, Manual 1.5", or Lift Group, Hydraulic 1.5"
ONE AVAILABLE HYDRAULIC FUNCTIONS (e.g. DA1)
U/V ANGLE BLADES
W 524-6862 BLD 144 U/V ANG 2.0HPL 2,705 $28,758 NI...........................
BLADE HEIGHT: 40" (1016mm)REQUIRES: Lift Group, Manual 2"
TWO AVAILABLE HYDRAULIC FUNCTIONS (e.g. DA1 & DA2)
140M2, 140M3, 160M2 and 160M3 WINGSMASTED ARRANGEMENTS
HYDRAULIC REAR BRACE HEIGHT ADJUSTMENT WINGS
W 483-5950 WING 144/60 BM HYD HGHT ADJ M 3,651 $24,054 NI...................
HEIGHT: 40" (1018mm)FOR USE WITH: M2 AND M3 SERIES MOTOR GRADERS ONLYREQUIRES: 3 Valves and ripper lines
W 483-5951 WING 168/60 BM HYD HGHT ADJ M 3,790 $25,961 NI...................
HEIGHT: 42" (1053mm)FOR USE WITH: M2 AND M3 SERIES MOTOR GRADERS ONLYREQUIRES: 3 Valves and ripper lines
MANUAL REAR BRACE HEIGHT ADJUSTMENT WINGS
W 483-5952 WING 144/60 BM MAN HGHT ADJ M 3,543 $21,413 NI..................
HEIGHT: 40" (1018mm)FOR USE WITH: M2 AND M3 SERIES MOTOR GRADERS ONLYREQUIRES: 2 Valves
RIPPER HEIGHT ADJUSTMENT WINGS
W 483-5954 WING 144/60 RM RIP HGHT ADJ M 3,018 $20,256 NI....................
HEIGHT: 40" (1018mm)FOR USE WITH: M2 AND M3 SERIES MOTOR GRADERS ONLYREQUIRES: 2 Valves and Ripper
W 483-5955 WING 168/60 RM RIP HGHT ADJ M 3,157 $20,749 NI....................
HEIGHT: 42" (1053mm)FOR USE WITH: M2 AND M3 SERIES MOTOR GRADERS ONLYREQUIRES: 2 Valves and Ripper
Supersedes 02JAN2018 Subject to change without notice Effective 02JAN2019Printed in USACaterpillar: Confidential Green
US-A-19-01 A U. S. DOLLAR CURRENCY WT-MG-010
Caterpillar Work Tools Price Pages 1-2-19 - WT-MGThe Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25
11 Bid Term: 2/20/19 - 2/19/21
CATERPILLAR MACHINE PRICE LIST
WT-MG
REF Ship Weight List Price
USE NO. lbs At FactoryCATERPILLAR WORK TOOLS
140M/160M MOTOR GRADER (CONT.)
140M/160M SNOW REMOVAL (Cont.)
RIPPER MOUNT MANUAL REAR BRACE ADJUSTMENT WINGS
W 483-5956 WING 144/60 RM MAN HGHT ADJ M 3,153 $20,256 NI..................
HEIGHT: 40" (1018mm)FOR USE WITH: M2 AND M3 SERIES MOTOR GRADERS ONLYREQUIRES: 2 Valves
W 483-5957 WING 168/60 RM MAN HGHT ADJ M 3,292 $21,840 NI...................
HEIGHT: 42" (1053mm)FOR USE WITH: M2 AND M3 SERIES MOTOR GRADERS ONLYREQUIRES: 2 Valves
Supersedes 02JAN2018 Subject to change without notice Effective 02JAN2019Printed in USACaterpillar: Confidential Green
US-A-19-01 A U. S. DOLLAR CURRENCY WT-MG-011
Caterpillar Work Tools Price Pages 1-2-19 - WT-MGThe Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25
12 Bid Term: 2/20/19 - 2/19/21
CATERPILLAR MACHINE PRICE LIST
WT-MG
REF Ship Weight List Price
USE NO. lbs At FactoryCATERPILLAR WORK TOOLS
140M/160M MOTOR GRADER (CONT.)
140M/160M SNOW REMOVAL (Cont.)
140M1/160M1 WINGS
HYDRAULIC REAR BRACE HEIGHT ADJUSTMENT WINGS
W 275-5902 WING 144/60 BM HYD HGHT ADJ M 3,667 $22,015 NI...................
Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & ServicesHEIGHT: 38"(965)FOR USE WITH: M1 SERIES MOTOR GRADERS ONLY!!!REQUIRES: 3 valves and ripper lines 231-1518 or 250-4226
W 275-5903 WING 168/60 BM HYD HGHT ADJ M 3,812 $23,601 NI...................
HEIGHT: 38"(965)FOR USE WITH: M1 SERIES MOTOR GRADERS ONLY!!!REQUIRES: 3 valves and ripper lines 231-1518 or 250-4226
MANUAL REAR BRACE HEIGHT ADJUSTMENT WINGS
W 275-5904 WING 144/60 BM MAN HGHT ADJ M 3,428 $20,256 NI..................
Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & ServicesHEIGHT: 38"(965)FOR USE WITH: M1 SERIES MOTOR GRADERS ONLY!!!REQUIRES: 2 valves
RIPPER HEIGHT ADJUSTMENT WINGS
W 275-5906 WING 144/60 RM RIP HGHT ADJ M 3,051 $20,256 NI....................
Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & ServicesHEIGHT: 38"(965)FOR USE WITH: M1 SERIES MOTOR GRADERS ONLY!!!REQUIRES: 2 valves and ripper
W 275-5907 WING 168/60 RM RIP HGHT ADJ M 3,194 $21,840 NI....................
HEIGHT: 38"(965)FOR USE WITH: M1 SERIES MOTOR GRADERS ONLY!!!REQUIRES: 2 valves and ripper
CONVERSION KITS CONVERTING H SERIES WINGS TO M1 SERIES MACHINES
W 300-5518 KIT, H-TO-M CONVERSION 985 $5,183 NI.............................
FOR USE WITH: Kit for manual rear brace height adjustment modelsFOR USE WITH: M1 SERIES MOTOR GRADERS ONLY!!!
Supersedes 02JAN2018 Subject to change without notice Effective 02JAN2019Printed in USACaterpillar: Confidential Green
US-A-19-01 A U. S. DOLLAR CURRENCY WT-MG-012
Caterpillar Work Tools Price Pages 1-2-19 - WT-MGThe Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25
13 Bid Term: 2/20/19 - 2/19/21
CATERPILLAR MACHINE PRICE LIST
WT-MG
REF Ship Weight List Price
USE NO. lbs At FactoryCATERPILLAR WORK TOOLS
140M/160M MOTOR GRADER (CONT.)
140M/160M SNOW REMOVAL (Cont.)
W 300-5519 KIT, H-TO-M CONVERSION 700 $4,224 NI.............................
FOR USE WITH: Kit for ripper mounted rear brace heightadjustment models
FOR USE WITH: M1 SERIES MOTOR GRADERS ONLY!!!
MASTLESS ARRANGEMENTS: MANUAL PUSH POLE
140M1, 140M2, 140M3, 160M1, 160M2 & 160M3 WINGS
W 517-7339 WING 144/40 RM FIXED 3,545 $20,850 NI.............................
MAX BLADE HEIGHT: 44" (1118mm)BENCH HEIGHT: 40" (1016MM)REQUIRES: 2 AVAILABLE VALVES: WM AND WT+FLOAT
Mount, Snow Wing, Frame Ready OR Snow Arrangement
W 517-7340 WING 144/40 BM FIXED 3,826 $20,850 NI.............................
MAX BLADE HEIGHT: 44" (1118mm)BENCH HEIGHT: 40" (1016MM)REQUIRES: 2 AVAILABLE VALVES: WM AND WT+FLOAT
Mount, Snow Wing, Frame Ready OR Snow Arrangement
MASTLESS ARRANGEMENTS: HYDRAULIC PUSH POLE140M1, 140M2, 140M3, 160M1, 160M2, & 160M3 WINGS
W 517-7341 WING 144/40 RM FIXED 3,632 $23,726 NI.............................
INCLUDES HYDRAULIC PUSH POLEMAX BLADE HEIGHT: 44" (1118mm)BENCH HEIGHT: 40" (1016MM)REQUIRES: 3 AVAILABLE VALVES: WM, WT+FLOAT, and RIP with additional
ripper linesMount, Snow Wing, Frame Ready OR Snow Arrangement
W 517-7342 WING 144/40 BM FIXED 3,963 $23,726 NI.............................
INCLUDES HYDRAULIC PUSH POLEMAX BLADE HEIGHT: 44" (1118mm)BENCH HEIGHT: 40" (1016MM)REQUIRES: 3 AVAILABLE VALVES: WM, WT+FLOAT, and RIP with additional
ripper linesMount, Snow Wing, Frame Ready OR Snow Arrangement
140M2, 140M3, 160M2 and 160M3 WINGS
HYDRAULIC REAR BRACE HEIGHT ADJUSTMENT WINGS
Supersedes 02JAN2018 Subject to change without notice Effective 02JAN2019Printed in USACaterpillar: Confidential Green
US-A-19-01 A U. S. DOLLAR CURRENCY WT-MG-013
Caterpillar Work Tools Price Pages 1-2-19 - WT-MGThe Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25
14 Bid Term: 2/20/19 - 2/19/21
CATERPILLAR MACHINE PRICE LIST
WT-MG
REF Ship Weight List Price
USE NO. lbs At FactoryCATERPILLAR WORK TOOLS
140M/160M MOTOR GRADER (CONT.)
140M2, 140M3, 160M2 and 160M3 WINGS (Cont.)
W 483-5950 WING 144/60 BM HYD HGHT ADJ M 3,651 $24,054 NI...................
HEIGHT: 40" (1018mm)FOR USE WITH: M2 AND M3 SERIES MOTOR GRADERS ONLY!!!REQUIRES: 3 Valves and ripper lines
W 483-5951 WING 168/60 BM HYD HGHT ADJ M 3,790 $25,961 NI...................
HEIGHT: 42" (1053mm)FOR USE WITH: M2 AND M3 SERIES MOTOR GRADERS ONLY!!!REQUIRES: 3 Valves and ripper lines
MANUAL REAR BRACE HEIGHT ADJUSTMENT WINGS
W 483-5952 WING 144/60 BM MAN HGHT ADJ M 3,543 $21,413 NI..................
HEIGHT: 40" (1018mm)FOR USE WITH: M2 AND M3 SERIES MOTOR GRADERS ONLY!!!REQUIRES: 2 Valves
RIPPER HEIGHT ADJUSTMENT WINGS
W 483-5954 WING 144/60 RM RIP HGHT ADJ M 3,018 $20,256 NI....................
HEIGHT: 40" (1018mm)FOR USE WITH: M2 AND M3 SERIES MOTOR GRADERS ONLY!!!REQUIRES: 2 Valves and Ripper
W 483-5955 WING 168/60 RM RIP HGHT ADJ M 3,157 $20,749 NI....................
HEIGHT: 42" (1053mm)FOR USE WITH: M2 AND M3 SERIES MOTOR GRADERS ONLY!!!REQUIRES: 2 Valves and Ripper
RIPPER MOUNT MANUAL REAR BRACE ADJUSTMENT WINGS
W 483-5956 WING 144/60 RM MAN HGHT ADJ M 3,153 $20,256 NI..................
HEIGHT: 40" (1018mm)FOR USE WITH: M2 AND M3 SERIES MOTOR GRADERS ONLY!!!REQUIRES: 2 Valves
W 483-5957 WING 168/60 RM MAN HGHT ADJ M 3,292 $21,840 NI...................
HEIGHT: 42" (1053mm)FOR USE WITH: M2 AND M3 SERIES MOTOR GRADERS ONLY!!!REQUIRES: 2 Valves
140M1/160M1 WINGS
HYDRAULIC REAR BRACE HEIGHT ADJUSTMENT WINGS
Supersedes 02JAN2018 Subject to change without notice Effective 02JAN2019Printed in USACaterpillar: Confidential Green
US-A-19-01 A U. S. DOLLAR CURRENCY WT-MG-014
Caterpillar Work Tools Price Pages 1-2-19 - WT-MGThe Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25
15 Bid Term: 2/20/19 - 2/19/21
CATERPILLAR MACHINE PRICE LIST
WT-MG
REF Ship Weight List Price
USE NO. lbs At FactoryCATERPILLAR WORK TOOLS
140M/160M MOTOR GRADER (CONT.)
140M1/160M1 WINGS (Cont.)
W 275-5902 WING 144/60 BM HYD HGHT ADJ M 3,667 $22,015 NI...................
Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & ServicesHEIGHT: 38"(965)FOR USE WITH: M1 SERIES MOTOR GRADERS ONLY!!!REQUIRES: 3 valves and ripper lines 231-1518 or 250-4226
W 275-5903 WING 168/60 BM HYD HGHT ADJ M 3,812 $23,601 NI...................
HEIGHT: 38"(965)FOR USE WITH: M1 SERIES MOTOR GRADERS ONLY!!!REQUIRES: 3 valves and ripper lines 231-1518 or 250-4226
MANUAL REAR BRACE HEIGHT ADJUSTMENT WINGS
W 275-5904 WING 144/60 BM MAN HGHT ADJ M 3,428 $20,256 NI..................
Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & ServicesHEIGHT: 38"(965)FOR USE WITH: M1 SERIES MOTOR GRADERS ONLY!!!REQUIRES: 2 valves
RIPPER HEIGHT ADJUSTMENT WINGS
W 275-5906 WING 144/60 RM RIP HGHT ADJ M 3,051 $20,256 NI....................
Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & ServicesHEIGHT: 38"(965)FOR USE WITH: M1 SERIES MOTOR GRADERS ONLY!!!REQUIRES: 2 valves and ripper
W 275-5907 WING 168/60 RM RIP HGHT ADJ M 3,194 $21,840 NI....................
HEIGHT: 38"(965)FOR USE WITH: M1 SERIES MOTOR GRADERS ONLY!!!REQUIRES: 2 valves and ripper
CONVERSION KITS CONVERTING H SERIES WINGS TO M1 SERIES MACHINES
W 300-5518 KIT, H-TO-M CONVERSION 985 $5,183 NI.............................
FOR USE WITH: Kit for manual rear brace height adjustment modelsFOR USE WITH: M1 SERIES MOTOR GRADERS ONLY!!!
W 300-5519 KIT, H-TO-M CONVERSION 700 $4,224 NI.............................
FOR USE WITH: Kit for ripper mounted rear brace heightadjustment models
FOR USE WITH: M1 SERIES MOTOR GRADERS ONLY!!!
Supersedes 02JAN2018 Subject to change without notice Effective 02JAN2019Printed in USACaterpillar: Confidential Green
US-A-19-01 A U. S. DOLLAR CURRENCY WT-MG-015
Caterpillar Work Tools Price Pages 1-2-19 - WT-MGThe Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25
16 Bid Term: 2/20/19 - 2/19/21
CATERPILLAR MACHINE PRICE LIST
WT-MG
REF Ship Weight List Price
USE NO. lbs At FactoryCATERPILLAR WORK TOOLS
14M MOTOR GRADER
14M
BLADES
ANGLE BLADES SNOW
W 524-6858 BLD 144 MAN ANG 2.0HPL 2,655 $15,529 NI..........................
BLADE HEIGHT: 40" (1016mm)REQUIRES: Lift Group, Manual 2"
ONE AVAILABLE HYDRAULIC FUNCTIONS (e.g. DA1)"CANADIAN DEALERS REFERENCE WT-CADSNW PRICE LIST"
14M LIFT GROUPS
W 540-1618 LIFT GROUP, MANUAL 2" 1,832 $13,640 NI............................
REQUIRES: Front lift function (includes the front lift lines)
14M SCARIFIERS
FRONT MOUNTED
W 212-6232 SCARIFIER, FRONT V-TYPE 1.5HPL 865 $4,542 NI........................
Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & ServicesINCLUDES: 5 teethREQUIRES: Lift Group, Manual 1.5"
W 212-6231 SCARIFIER, FRONT V-TYPE 1.5HPL 956 $4,990 NI........................
Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & ServicesINCLUDES: 11 teethREQUIRES: Lift Group, Manual 1.5"
14M SNOW REMOVAL
PLOWS
V-PLOWS
W 448-2848 BLD 126 V-PLOW 2.0HPL 2,500 $13,346 NI............................
HEIGHT: 84" (2129mm)REQUIRES: Lift Group, Manual 2"
PLOW HOOKS
Supersedes 02JAN2018 Subject to change without notice Effective 02JAN2019Printed in USACaterpillar: Confidential Green
US-A-19-01 A U. S. DOLLAR CURRENCY WT-MG-016
Caterpillar Work Tools Price Pages 1-2-19 - WT-MGThe Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25
17 Bid Term: 2/20/19 - 2/19/21
CATERPILLAR MACHINE PRICE LIST
WT-MG
REF Ship Weight List Price
USE NO. lbs At FactoryCATERPILLAR WORK TOOLS
14M MOTOR GRADER (CONT.)
14M SNOW REMOVAL (Cont.)
W 230-7093 HOOK, V-PLOW 1.5HPL 42 $282 NI.................................
Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & ServicesREQUIRES: quantity 2
MASTLESS ARRANGEMENTS: MANUAL PUSH POLE
W 517-7343 WING 144/48 RM FIXED 3,929 $22,001 NI.............................
MAX BLADE HEIGHT: 44" (1118mm)BENCH HEIGHT: 48" (1219MM)REQUIRES: 2 AVAILABLE VALVES: WM AND WT+FLOAT
Mount, Snow Wing, Frame Ready OR Snow Arrangement"CANADIAN DEALERS REFERENCE WT-CADSNW PRICE LIST"
MASTLESS ARRANGEMENTS: HYDRAULIC PUSH POLE
14M WINGS
RIPPER HEIGHT ADJUSTMENT WINGS
W 275-5915 WING 168/60 RM RIP HGHT ADJ M 3,300 $28,092 NI....................
HEIGHT: 38"(965)FOR USE WITH: M1 SERIES MOTOR GRADERS ONLY!!!REQUIRES: 2 valves and ripper
WING FRAME READY KITS
W 303-9412 KIT,NON-FRAME READY SNOW WING 246 $1,444 NI.....................
FOR USE WITH: M1 SERIES MOTOR GRADERS WITH TUBE STYLE FRONT FRAME ONLY
16M MOTOR GRADER
16M BLADES
STRAIGHT BLADES
W 145-1304 BLD 131 STRAIGHT 2.25HPL 3,760 $19,446 NI..........................
HEIGHT: 57"(1448mm)REQUIRES: lift group
Supersedes 02JAN2018 Subject to change without notice Effective 02JAN2019Printed in USACaterpillar: Confidential Green
US-A-19-01 A U. S. DOLLAR CURRENCY WT-MG-017
Caterpillar Work Tools Price Pages 1-2-19 - WT-MGThe Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25
18 Bid Term: 2/20/19 - 2/19/21
CATERPILLAR MACHINE PRICE LIST
WT-MG
REF Ship Weight List Price
USE NO. lbs At FactoryCATERPILLAR WORK TOOLS
16M MOTOR GRADER (CONT.)
16M LIFT GROUP
MANUAL
W 550-0161 LIFT GROUP, MANUAL 2.25" 3,133 $17,261 NI..........................
Manual locking pinsREQUIRES: 1 valve and lines group
Supersedes 02JAN2018 Subject to change without notice Effective 02JAN2019Printed in USACaterpillar: Confidential Green
US-A-19-01 A U. S. DOLLAR CURRENCY WT-MG-018
Caterpillar Work Tools Price Pages 1-2-19 - WT-MGThe Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25
19 Bid Term: 2/20/19 - 2/19/21
CATERPILLAR MACHINE PRICE LIST
WT-MG
REF Ship Weight List Price
USE NO. lbs At FactoryCATERPILLAR WORK TOOLS
120/135 MOTOR GRADER
120H/135H BLADES
ANGLE BLADES
W 230-7096 BLD 151 HYD ANG 1.5HPL 3,400 $24,069 NI...........................
HEIGHT: 38.5" (978)REQUIRES: lift group
STRAIGHT BLADES
W 152-1353 BLD 110 STRAIGHT 1.5HPL 1,850 $10,431 NI...........................
Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & ServicesHEIGHT: 52"(1321mm)REQUIRES: lift group
120H/135H LIFT GROUPS
MECHANICAL FLOATS
LIFT GROUP CONNECTOR LINES
W 148-0658 LINES, CONNECTOR 15 $379 NI...................................
REQUIRED: for machines not equipped with linesgroup 114-0025 or 155-4077 from factory
120H/135H SCARIFIERS
FRONT MOUNT
W 212-6232 SCARIFIER, FRONT V-TYPE 1.5HPL 865 $4,542 NI........................
Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & ServicesINCLUDES: 5 teethREQUIRES: lift group
W 212-6231 SCARIFIER, FRONT V-TYPE 1.5HPL 956 $4,990 NI........................
Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & ServicesINCLUDES: 11 teethREQUIRES: lift group
120H/135H SNOW REMOVAL
PLOWS
ONE-WAY PLOWS
Supersedes 02JAN2018 Subject to change without notice Effective 02JAN2019Printed in USACaterpillar: Confidential Green
US-A-19-01 A U. S. DOLLAR CURRENCY WT-MG-019
Caterpillar Work Tools Price Pages 1-2-19 - WT-MGThe Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25
20 Bid Term: 2/20/19 - 2/19/21
CATERPILLAR MACHINE PRICE LIST
WT-MG
REF Ship Weight List Price
USE NO. lbs At FactoryCATERPILLAR WORK TOOLS
120/135 MOTOR GRADER (CONT.)
120H/135H SNOW REMOVAL (Cont.)
W 230-7097 PLOW, 144 ONE-WAY SNOW 1,940 $12,885 NI.........................
HEIGHT: 67"(1702mm)REQUIRES: lift group
REVERSIBLE PLOWS
W 230-7085 PLOW 144 HYD REV SNOW 1.5HPL 3,500 $19,346 NI....................
Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & ServicesHEIGHT: 48"(1219)REQUIRES: 21 GPM valve and lift group
W 230-7086 PLOW 168 HYD REV SNOW 1.5HPL 3,800 $20,303 NI.....................
Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & ServicesHEIGHT: 48"(1219)REQUIRES: 21 GPM valve and lift group
V PLOWS
W 230-7088 BLD, 104 V-PLOW 1.5HPL 2,240 $11,881 NI............................
HEIGHT: 79"(2007mm)REQUIRES: lift group
PLOW HOOKS
W 230-7093 HOOK, V-PLOW 1.5HPL 42 $282 NI.................................
Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & ServicesREQUIRES: quantity 2
PLOW CONNECTOR LINES
W 230-7100 LINES, CONNECTOR 18 $349 NI...................................
REQUIRED: for machines not equipped with lines group192-4699 or 3Z-5481 from factory
120H/135H WINGS
CONVERSION KITS CONVERTING H SERIES WINGS TO M SERIES MACHINES
W 307-6356 KIT, H-TO-M CONVERSION 945 $5,758 NI.............................
FOR USE WITH: Kit for hydraulic rear brace height adjustment models
Supersedes 02JAN2018 Subject to change without notice Effective 02JAN2019Printed in USACaterpillar: Confidential Green
US-A-19-01 A U. S. DOLLAR CURRENCY WT-MG-020
Caterpillar Work Tools Price Pages 1-2-19 - WT-MGThe Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25
21 Bid Term: 2/20/19 - 2/19/21
CATERPILLAR MACHINE PRICE LIST
WT-MG
REF Ship Weight List Price
USE NO. lbs At FactoryCATERPILLAR WORK TOOLS
140/143/160/163/12 MOTOR GRADER
140H/143H/160H/163H/12H
BLADES
ANGLE BLADES
W 230-7096 BLD 151 HYD ANG 1.5HPL 3,400 $24,069 NI...........................
HEIGHT: 38.5" (978)REQUIRES: lift group
STRAIGHT BLADES
W 152-1353 BLD 110 STRAIGHT 1.5HPL 1,850 $10,431 NI...........................
Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & ServicesHEIGHT: 52"(1321mm)REQUIRES: lift group
140H/160H/12H LIFT GROUPS
W 204-6250 LIFT GROUP, MANUAL 1.5" 1,500 $7,468 NI...........................
Manual locking pinsREQUIRES: dozer valve and 114-0025 or 155-4077 lines group
LIFT GROUP CONNECTOR LINES
W 148-0658 LINES, CONNECTOR 15 $379 NI...................................
REQUIRED: for machines not equipped with linesgroup 114-0025 or 155-4077 from factory
143H/163H LIFT GROUPS
W 306-3024 LIFT GROUP, HYDRAULIC 1.5" 1,600 $12,100 NI.........................
Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & ServicesHydraulic locking pins (includes diverter valve to actuate
hydraulic locking pins)REQUIRES: Front lift function (includes the front lift lines)
and 359-3925 factory mountingW 293-5556 LIFT GROUP, MANUAL 1.5" 1,600 $8,415 NI...........................
Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & ServicesREQUIRES: Front lift function (includes the front lift lines)
and 359-3925 factory mounting
LIFT GROUP CONNECTOR LINES
Supersedes 02JAN2018 Subject to change without notice Effective 02JAN2019Printed in USACaterpillar: Confidential Green
US-A-19-01 A U. S. DOLLAR CURRENCY WT-MG-021
Caterpillar Work Tools Price Pages 1-2-19 - WT-MGThe Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25
22 Bid Term: 2/20/19 - 2/19/21
CATERPILLAR MACHINE PRICE LIST
WT-MG
REF Ship Weight List Price
USE NO. lbs At FactoryCATERPILLAR WORK TOOLS
140/143/160/163/12 MOTOR GRADER (CONT.)
143H/163H LIFT GROUPS (Cont.)
W 148-0660 LINES, CONNECTOR 35 $424 NI...................................
REQUIRED: for machines not equipped with lines group 124-1390or 4Z-6513 from factory
140/143/160/163/12 SCARIFIERS
W 212-6232 SCARIFIER, FRONT V-TYPE 1.5HPL 865 $4,542 NI........................
Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & ServicesINCLUDES: 5 teethREQUIRES: lift group
W 212-6231 SCARIFIER, FRONT V-TYPE 1.5HPL 956 $4,990 NI........................
Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & ServicesINCLUDES: 11 teethREQUIRES: lift group
140H/143H/160H/163H/12H SNOW REMOVAL
PLOWS
ONE-WAY PLOWS
W 230-7097 PLOW, 144 ONE-WAY SNOW 1,940 $12,885 NI.........................
HEIGHT: 67"(1702mm)REQUIRES: lift group
REVERSIBLE PLOWS
W 230-7085 PLOW 144 HYD REV SNOW 1.5HPL 3,500 $19,346 NI....................
Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & ServicesHEIGHT: 48"(1219)REQUIRES: 21 GPM valve and lift group
W 230-7086 PLOW 168 HYD REV SNOW 1.5HPL 3,800 $20,303 NI.....................
Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & ServicesHEIGHT: 48"(1219)REQUIRES: 21 GPM valve and lift group
V-PLOWS
W 230-7098 BLD 117 V-PLOW 1.5HPL 2,400 $12,614 NI.............................
Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & ServicesHEIGHT: 82"(2083mm)REQUIRES: lift group
Supersedes 02JAN2018 Subject to change without notice Effective 02JAN2019Printed in USACaterpillar: Confidential Green
US-A-19-01 A U. S. DOLLAR CURRENCY WT-MG-022
Caterpillar Work Tools Price Pages 1-2-19 - WT-MGThe Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25
23 Bid Term: 2/20/19 - 2/19/21
CATERPILLAR MACHINE PRICE LIST
WT-MG
REF Ship Weight List Price
USE NO. lbs At FactoryCATERPILLAR WORK TOOLS
140/143/160/163/12 MOTOR GRADER (CONT.)
140H/143H/160H/163H/12H SNOW REMOVAL (Cont.)
PLOW HOOKS
W 230-7093 HOOK, V-PLOW 1.5HPL 42 $282 NI.................................
Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & ServicesREQUIRES: quantity 2
PLOW CONNECTOR LINES
W 230-7100 LINES, CONNECTOR 18 $349 NI...................................
REQUIRED: for machines not equipped with lines group192-4699 or 3Z-5481 from factory
140H/143H/160H/163H/12H WINGS
HYDRAULIC REAR BRACE HEIGHT ADJUSTMENT WINGS
W 258-7957 WING 144/60 BM HYD HGHT ADJ M 3,600 $22,015 NI...................
HEIGHT: 38"(965)FOR USE WITH: 163H prefix ARL
160H prefix ASD143H prefix APN140H prefix APM
REQUIRES: 3 valves and ripper lines 166-3308MANUAL REAR BRACE HEIGHT ADJUSTMENT WINGS
W 258-7959 WING 144/60 BM MAN HGHT ADJ M 3,265 $20,256 NI..................
HEIGHT: 38"(965)FOR USE WITH: 163H prefix ARL
160H prefix ASD143H prefix APN140H prefix APM
REQUIRES: 2 valvesRIPPER HEIGHT ADJUSTMENT WINGS
W 258-7961 RIPPER HEIGHT ADJUSTMENT WING 2,870 $20,256 NI....................
HEIGHT: 38"(965)REQUIRES: 2 valves and ripper
RIPPER MOUNT, MANUAL REAR BRACE HEIGHT ADJUSTMENT WINGS
Supersedes 02JAN2018 Subject to change without notice Effective 02JAN2019Printed in USACaterpillar: Confidential Green
US-A-19-01 A U. S. DOLLAR CURRENCY WT-MG-023
Caterpillar Work Tools Price Pages 1-2-19 - WT-MGThe Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25
24 Bid Term: 2/20/19 - 2/19/21
CATERPILLAR MACHINE PRICE LIST
WT-MG
REF Ship Weight List Price
USE NO. lbs At FactoryCATERPILLAR WORK TOOLS
140/143/160/163/12 MOTOR GRADER (CONT.)
WING FRAME READY KITS
W 230-7099 KIT,NON-FRAME READY SNOW WING 117 $308 NI.....................
Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & ServicesINCLUDES: Ears for MG frame to mount snow wing
14 MOTOR GRADER
14H
BLADES
STRAIGHT BLADES
W 152-1354 BLD 120 STRAIGHT 1.5HPL 2,100 $11,092 NI...........................
HEIGHT: 52"(1321mm)REQUIRES: lift group
14H LIFT GROUPS
W 171-7302 LIFT GROUP, MANUAL 1.5" 1,850 $13,640 NI...........................
Manual locking pinsREQUIRES: dozer valve
14H SCARIFIERS
FRONT MOUNTED
W 212-6232 SCARIFIER, FRONT V-TYPE 1.5HPL 865 $4,542 NI........................
Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & ServicesINCLUDES: 5 teethREQUIRES: lift group
W 212-6231 SCARIFIER, FRONT V-TYPE 1.5HPL 956 $4,990 NI........................
Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & ServicesINCLUDES: 11 teethREQUIRES: lift group
14H SNOW REMOVAL
PLOWS
ONE-WAY PLOWS
Supersedes 02JAN2018 Subject to change without notice Effective 02JAN2019Printed in USACaterpillar: Confidential Green
US-A-19-01 A U. S. DOLLAR CURRENCY WT-MG-024
Caterpillar Work Tools Price Pages 1-2-19 - WT-MGThe Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25
25 Bid Term: 2/20/19 - 2/19/21
CATERPILLAR MACHINE PRICE LIST
WT-MG
REF Ship Weight List Price
USE NO. lbs At FactoryCATERPILLAR WORK TOOLS
14 MOTOR GRADER (CONT.)
14H SNOW REMOVAL (Cont.)
REVERSIBLE PLOWS
W 230-7086 PLOW 168 HYD REV SNOW 1.5HPL 3,800 $20,303 NI.....................
HEIGHT: 48"(1219)REQUIRES: 21 GPM valve and lift group
W 230-7102 PLOW 180 HYD REV SNOW 1.5HPL 3,900 $21,381 NI.....................
HEIGHT: 48"(1219)REQUIRES: 21 GPM valve and lift group
PLOW HOOKS
W 230-7093 HOOK, V-PLOW 1.5HPL 42 $282 NI.................................
Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & Services
16 MOTOR GRADER
16H BLADES
STRAIGHT BLADES
W 145-1304 BLD 131 STRAIGHT 2.25HPL 3,760 $19,446 NI..........................
HEIGHT: 57"(1448mm)REQUIRES: lift group
16H LIFT GROUPs
MANUAL
W 550-0161 LIFT GROUP, MANUAL 2.25" 3,133 $17,261 NI..........................
Manual locking pinsREQUIRES: 1 valve and lines group
PACKING
PACKING CODES
0P-0210 PACK, DOMESTIC TRUCK 0 NC................................
0P-5812 PACK, EXPORT 0 NC........................................
Supersedes 02JAN2018 Subject to change without notice Effective 02JAN2019Printed in USACaterpillar: Confidential Green
US-A-19-01 A U. S. DOLLAR CURRENCY WT-MG-025
Caterpillar Work Tools Price Pages 1-2-19 - WT-MGThe Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25
26 Bid Term: 2/20/19 - 2/19/21
CATERPILLAR MACHINE PRICE LIST
WT-MG
REF Ship Weight List Price
USE NO. lbs At FactoryCATERPILLAR WORK TOOLS
PACKING (CONT.)
PACKING CODES (Cont.)
W 0G-0007 CWTS CUSTOM PRODUCT ACC QUOTE 0 NC NI......................
Can only be used for ETO ordersPlease use the "NOTES" screen when ordering to mention the quotenumber and to specify the required product(s) as mentioned inthe quote.
Supersedes 02JAN2018 Subject to change without notice Effective 02JAN2019Printed in USACaterpillar: Confidential Green
US-A-19-01 A U. S. DOLLAR CURRENCY WT-MG-026
Caterpillar Work Tools Price Pages 1-2-19 - WT-MGThe Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25
27 Bid Term: 2/20/19 - 2/19/21
Related Documents
