Dec 26, 2015
The DBS-6000, is a mechanical seal that offers the versatility to connect the power cable of the pump from the downhole to the surface, quickly and safely, minimizing rig time and total operation cost.
IntroductionIntroduction
Produced by:
Norma API 11S3Norma API 11S3
11S3 NORM
The is fabricated under the Recommended Practice for Electrical Submersible Pump Installations
Produced by:
API 11S3 Norm API 11S3 Norm RecommendationsRecommendations
Transformer Bank
Transformer Bank
VENTED JUNCTION BOX
(OPTIONAL)SEE 4.3.4 & 4.3.5
VENTED JUNCTION BOX
(OPTIONAL)SEE 4.3.4 & 4.3.5
Service Disconnected
and Motor Control Panel
Service Disconnected
and Motor Control Panel
ELECTRICAL SEAL FITTING AND VENTELECTRICAL SEAL
FITTING AND VENT
GROUND CONDUCTOR
GROUND CONDUCTOR
Electric Assembly
Electric Assembly
WellheadWellhead
Surface Power Cable
Surface Power Cable
Prodcution StringProdcution String
CasingCasing
BandsBands
Pumping AssemblyPumping Assembly
Downhole Pump Cable
Downhole Pump Cable
SpliceSplice
Ground Rod
Ground Rod
AmericanPetroleumInstitute
Produced by:
SECURITYSECURITY
ALL PENETRATORS HAVE AN INTERN GROUND WIRE THAT CONNECTS THE
WELLHEAD AND ALL ITS COMPONENTS.
ALL PENETRATORS HAVE AN INTERN GROUND WIRE THAT CONNECTS THE
WELLHEAD AND ALL ITS COMPONENTS.
ALL PENETRATORS HAVE CERTIFY SEALS OF SECURITY AND VENTILATION AS A
STANDAR PARAMETER OF MANUFACTURING.
ALL PENETRATORS HAVE CERTIFY SEALS OF SECURITY AND VENTILATION AS A
STANDAR PARAMETER OF MANUFACTURING.
THE SURFACE CONNECTION SYSTEM MAKES THE VENTING BOX IS
OPTIONAL.
THE SURFACE CONNECTION SYSTEM MAKES THE VENTING BOX IS
OPTIONAL.
Produced by:
The Seal Penetrator System is fabricated under the following standars:
Produced by:
Manufacturing StandarsManufacturing Standars
Explosion Proof NEMA 7 & 9 Class I, Divisions I & II Group D
Junction BoxJunction Box
Complete AssemblyComplete Assembly
HangerHanger Double Body Seal Penetrator System
6000
Double Body Seal Penetrator System
6000
Produced by:
The DBS-6000 replaces other models of the market without requiring any modification in the hanger.
Reducer Bushing (Dummy Mandrel)Reducer Bushing
(Dummy Mandrel)
The figure shows a completation with a “BIW” Penetrator, this can be replaced by the SPS DBS-6000 using a Reducer Bushing (Dummy Mandrel) SPS DBS-6000SPS DBS-6000
SPS JB-20SPS
JB-20
VersatilityVersatility
BIWPenetrator
BIWPenetrator
Produced by:
The design makes it unique in its style, because the sealed system can be installed outside the hole.
SPS DBS-6000 Outside the well
SPS DBS-6000 Outside the well
Produced by:
VersatilityVersatility
The threaded coupling system, is designed so that once adjusted the upper with the lower mandrel, the piston ensures sealing elements on its seat, which gives a stamp of quality to each driver individually. Significantly minimizes the use of tools and equipment installation.
Increases safety and reliability with the implementation of the Guide Pre-seal, used for cable alignment and primary seal.
Complete Installation of equipment is between 30 to 40 minutes.
The threaded coupling system, is designed so that once adjusted the upper with the lower mandrel, the piston ensures sealing elements on its seat, which gives a stamp of quality to each driver individually. Significantly minimizes the use of tools and equipment installation.
Increases safety and reliability with the implementation of the Guide Pre-seal, used for cable alignment and primary seal.
Complete Installation of equipment is between 30 to 40 minutes.
AdvantagesAdvantages
Produced by:
DBS-6000 on the HangerDBS-6000 on the Hanger
DBS-6000Installed with
Dummy Mandrel
DBS-6000Installed with
Dummy Mandrel
DBS-6000(Open View)
DBS-6000(Open View)
Produced by:
O’ring (Viton)O’ring (Viton)Upper MandrelUpper Mandrel
Lower MandrelLower Mandrel
Pre-Seal GuidePre-Seal Guide
Neck TransitionNeck Transition
DBS-6000 PartsDBS-6000 Parts
Main SealsMain SealsPistonPiston
BearingBearing O 'ring (Viton)O 'ring (Viton)
Produced by:
Cables de Potencia Cables de Potencia
Caja de EmpalmeCaja de Empalme
ColgadorColgador
Penetrador DBS 6000
Penetrador DBS 6000
Wellhead CompletationWellhead Completation
Produced by:
Installation of ConnectionsInstallation of Connections
ConductorConductor Ground WireGround Wire
Produced by:
SPS Surface Conduit J-Box(Open View)
SPS Surface Conduit J-Box(Open View)
Splice ConnectorSplice Connector
SPS Surface Conduit J-Box(Open View)
SPS Surface Conduit J-Box(Open View)
Installation of ConnectionsInstallation of Connections
Produced by:
Splice BootsSplice BootsProduced by:
SPS Surface Conduit J-Box(Open View)
SPS Surface Conduit J-Box(Open View)
Installation of ConnectionsInstallation of Connections
Drain and Vent
Drain and Vent
Surface ConnectionSurface Connection
Produced by:
Commercial InformationCommercial Information
Other Products:
Wellheads and Christmas Trees
Manufacturer
Contact informationContact information
Hector G. AhowPresident
Cra. 31 # 16-258 – MedellínTel.: 57 (4) 583 8764 (57) 315 871 9278
Fax: 57 (4) 583 87 64E-mail:
[email protected] Page:
www.ahow.com.ve
Manufacturer & Sales