ISC Consulting Engineers A/S Øster Allé 31 DK - 2100 Copenhagen Ø Denmark Phone: +45 35 27 88 00 Email: [email protected] Web: www.isc.dk Substation Design ISC entered the offshore wind business with the development and design of the offshore substation for the world’s first offshore wind farm in 2003. This design by ISC has formed the basis for almost all offshore wind farm substations built today. ISC key competence derives from the ability to undertake the complete range of tasks associated with substation design, from FEED/concept design through detailed design, tender documents, assistance during fabrication and installation and commissioning phase, site supervision and follow up. Innovative Engineering Engineering Disciplines • General We are working with the client Arrangement: achieve the best platform layout solution. • Structural: Design of an economical yet robust structure which optimises efficient installation. Geotechnical design and design of piles, substructure and topside. • Electrical: All electrical installations. Cable-ways, Earthing and Bonding, Single Line Diagrams, Power- and Light installations, Fire Alarm System, Auxiliary Systems and ATEX Area Classification. • HVAC: Design of systems to maintain the correct conditions for the sensitive platform equipment. • Mechanical: Working together with the client to ascertain the appropriate demands and specifications for equipment, lifting and environmental protection. • Piping: Open drain, bunkering, de-bunkering, sea water cleaning, technical water and sewage systems. Isometrics, material lists and stress analysis. • Process: Process Flow (PFD), Process & Instrumentation Diagrams (P&ID) and flow calculations. Services ISC provides independent engineering both directly for wind farm owners and developers as well as for EPCI contractors. • FEED: Layout, Descriptions, Feasibility Studies and preparation for Basic & Detail Design. • Basic & Detail Design Basis, Design Briefs, Design Design: Drawings and Design Reports. • Certifications: All projects are certified by independent certification agencies such as DNV-GL, Bureau Veritas and Lloyds. • Authority Approval in accordance with country Approval: specific regulations such as e.g BSH in Germany and Boem in the USA. • Offshore Skilled staff holding offshore Assistance: certificate. • Fire & Safety: We are cooperating with the client to achieve cost-effective fire & safety design. Chaired Hazid and Hazop sessions for the client. Risk Management. • Employer Engineering support during detail Engineer: design, manufacturing and commissioning. Development of employers requirement, philosophies and assistant doing EPC/EPCI contracting. Offshore Substations The Staff The combined staff of the company comprises 250 employees (year 2019/20) of which approximately 70 percent are graduates in civil and structural engineering, electrical or mechanical and related disciplines. Furthermore, ISC maintains standing agreements of cooperation with individual experts and public scientific institutions, thereby supplementing the company’s know-how in connection with assignments requiring multiprofessional teams of specialists outside the company’s own staff. For further information about the products and services ISC Consulting Engineers A/S can provide, please visit www.isc.dk BE A PART OF OUR FUTURE The Company ISC Consulting Engineers A/S was founded in 1967 by Kjeld Thomsen M.Sc. (Struct. Eng.), former associate professor at the Technical University of Denmark. ISC offices are located in Copenhagen, Esbjerg, Viborg, Kalundborg, Kolding, Aarhus and Aalborg in Denmark, and Wellington in New Zealand. ISC is an Engineering services company based in Denmark working worldwide to create value for our clients through innovative engineering solutions for on- and offshore projects. ISC has been providing engineering services to offshore wind projects since we designed the world’s first Offshore Substation almost 20 years ago. ISC provides engineering design service solutions within sectors such as Offshore Wind, Offshore Oil & Gas, Buildings, Energy, Industry and Infrastructure such as Industrial Plants, Power Stations, Port Facilities, Oil & Gas, Airports, Bridges and Railways. ISC has worldwide experience gained on projects carried out in more than 70 countries on five continents. Wind Energy One of the key competences in ISC is Wind Energy. Since the design of the offshore substation for the world’s first offshore wind farm in 2003, ISC has been a key player in the wind Energy business and offering engineering services for Substations, Wind turbine foundations and onshore substations. Today the list of reference counts more than 36 offshore substations, several WTG foundation projects and a highly experienced and skilled team. Offshore surveys, site supervision, assistance during the full project execution, numerous studies and new concept developments are part of the portfolio. Our services has been performed directly for wind park owners, EPC or EPCI partnership for all major players in the offshore wind energy business. We continuously challenge the design and way of thinking together with our Clients to obtain innovative solutions.
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
ISC Consulting Engineers A/S
Øster Allé 31
DK - 2100 Copenhagen Ø
Denmark
Phone: +45 35 27 88 00
Email: [email protected]
Web: www.isc.dk
Substation Design
ISC entered the offshore wind business with the
development and design of the offshore substation for
the world’s first offshore wind farm in 2003.
This design by ISC has formed the basis for almost all
offshore wind farm substations built today.
ISC key competence derives from the ability to
undertake the complete range of tasks associated with
substation design, from FEED/concept design through
detailed design, tender documents, assistance during
fabrication and installation and commissioning phase,
site supervision and follow up.
Innovative Engineering
Engineering Disciplines
• General We are working with the client
Arrangement: achieve the best platform layout
solution.
• Structural: Design of an economical yet robust
structure which optimises efficient
installation. Geotechnical design and
design of piles, substructure and
topside.
• Electrical: All electrical installations.
Cable-ways, Earthing and Bonding,
Single Line Diagrams, Power- and
Light installations, Fire Alarm System,
Auxiliary Systems and ATEX Area
Classification.
• HVAC: Design of systems to maintain the
correct conditions for the sensitive
platform equipment.
• Mechanical: Working together with the client to
ascertain the appropriate demands
and specifications for equipment,
lifting and environmental protection.
• Piping: Open drain, bunkering, de-bunkering,
sea water cleaning, technical water
and sewage systems.
Isometrics, material lists
and stress analysis.
• Process: Process Flow (PFD), Process &
Instrumentation Diagrams (P&ID)
and flow calculations.
Services
ISC provides independent engineering both directly for
wind farm owners and developers as well as for EPCI
contractors.
• FEED: Layout, Descriptions, Feasibility
Studies and preparation for Basic
& Detail Design.
• Basic & Detail Design Basis, Design Briefs, Design
Design: Drawings and Design Reports.
• Certifications: All projects are certified by
independent certification agencies
such as DNV-GL, Bureau Veritas and
Lloyds.
• Authority Approval in accordance with country
Approval: specific regulations such as e.g BSH
in Germany and Boem in the USA.
• Offshore Skilled staff holding offshore
Assistance: certificate.
• Fire & Safety: We are cooperating with the client
to achieve cost-effective fire & safety
design.
Chaired Hazid and Hazop sessions for
the client.
Risk Management.
• Employer Engineering support during detail
Engineer: design, manufacturing and
commissioning. Development of
employers requirement, philosophies
and assistant doing EPC/EPCI
contracting.
Offshore Substations
The Staff
The combined staff of the company comprises
250 employees (year 2019/20) of which
approximately 70 percent are graduates in
civil and structural engineering, electrical or
mechanical and related disciplines.
Furthermore, ISC maintains standing agreements
of cooperation with individual experts and public
scientific institutions, thereby supplementing
the company’s know-how in connection with
assignments requiring multiprofessional teams
of specialists outside the company’s own staff.
For further information about the products
and services ISC Consulting Engineers A/S can
provide, please visit www.isc.dk
BE A PART OF OUR FUTURE
The Company
ISC Consulting Engineers A/S was founded in 1967 by
Kjeld Thomsen M.Sc. (Struct. Eng.), former associate
professor at the Technical University of Denmark.
ISC offices are located in Copenhagen, Esbjerg, Viborg,
Kalundborg, Kolding, Aarhus and Aalborg in Denmark,
and Wellington in New Zealand.
ISC is an Engineering services company based in
Denmark working worldwide to create value for our
clients through innovative engineering solutions for on-
and offshore projects.
ISC has been providing engineering services to offshore
wind projects since we designed the world’s first
Offshore Substation almost 20 years ago.
ISC provides engineering design service solutions
within sectors such as Offshore Wind, Offshore Oil &
Gas, Buildings, Energy, Industry and Infrastructure such
as Industrial Plants, Power Stations, Port Facilities,
Oil & Gas, Airports, Bridges and Railways.
ISC has worldwide experience gained on projects
carried out in more than 70 countries on five
continents.
Wind Energy
One of the key competences in ISC is Wind Energy.
Since the design of the offshore substation for the
world’s first offshore wind farm in 2003, ISC has been
a key player in the wind Energy business and offering
engineering services for Substations, Wind turbine
foundations and onshore substations.
Today the list of reference counts more than 36
offshore substations, several WTG foundation projects
and a highly experienced and skilled team.
Offshore surveys, site supervision, assistance during
the full project execution, numerous studies and new
concept developments are part of the portfolio.
Our services has been performed directly for wind park
owners, EPC or EPCI partnership for all major players in
the offshore wind energy business.
We continuously challenge the design and way of
thinking together with our Clients to obtain innovative
solutions.
ISC and Offshore Substation Design
ISC Consulting Engineers A/S has extensive experience
in the design of offshore substations, dating back to
the design of the world’s first offshore substation,
installed at the Nysted Offshore Wind Farm in 2003.
ISC’s experience in the design of offshore structures is
founded on knowledge obtained over 40 years in the
offshore oil and gas industry.
Since then ISC has successfully undertaken the
complete detailed design of a further 36 offshore
substations. ISC’s portfolio clearly demonstrates a
comprehensive expertise within the field of offshore
substation design, including a broad spectrum of
topside layouts as well as jacket, gravity based and
monopile substructures.
ISC has also demonstrated the ability to work alongside
local authorities to produce superior solutions which
conform to the local regulations and authority approval.
Furthermore ISC has developed new concepts
employing modularization for standard offshore
substation platforms as well as custom fit solutions for
Clients World Wide.
In addition the detailed design ISC has performed
numerous concept and FEED studies for offshore
RENTEL (300 MW)
Transition Piece Weight : 800 tonnesMonopile Weight : 1.100 tonnesInstallation Year : 2018Water Depth : 31 metersSubstructure : MP/TP incl. Cable-deckDetailed Design : TP/MP/CabledeckOwner/Client : Rentel/STX
NORDSEE OST (295 MW)
Topside Weight : 1.650 tonnesInstallation Year : 2014Water Depth : 23 metersSubstructure : JacketDetailed Design : TopsideOwner/Client : RWE Innogy/Bladt
SANDBANK (288 MW)
Topside Weight : 2.230 tonnesJacket Weight : 1.560 tonnesInstallation Year : 2016Water Depth : 29 metersSubstructure : JacketDetailed Design : Topside and JacketOwner/Client : Vattenfall/Bladt
KRIEGERS FLAK KFA (200 MW)
Topside Weight : 1.350 tonnesInstallation Year : 2018Water Depth : 20 metersSubstructure : Concrete Gravity BaseDetailed Design : Topside/SubstructureOwner/Client : Energinet.dk
Installation of Gode Wind 01 in the German Bight. Location : German Bight
Location : German Bight
Location : Belgian North Sea
NORDSEE OST (295 MW)Installation Year : 2014
NORDSEE ONE (332 MW)Installation Year : 2016
SANDBANK (288 MW)Installation Year : 2016
GODE WIND 01 (332 MW)GODE WIND 02 (252 MW)Installation Year : 2015
WEST OF DUDDON SANDS (389 MW)Installation Year : 2013
BORKUM RIFFGRUND 1 (320 MW)Installation Year : 2013BORKUM RIFFGRUND 2 (450 MW)Installation Year : 2018
WALNEY 2 (183 MW)Installation Year : 2011WALNEY 1 (183 MW)Installation Year : 2010
COURSELLES-SUR-MER (450 MW)FÉCAMP (498 MW)ST NAZAIRE (480 MW)Basic Design EPCI Tender Documents
GUNFLEET SANDS (172 MW)Installation Year : 2008
HORNS REV 2 (209 MW)Installation Year : 2008
NYSTED 1 (166 MW)Installation Year : 2003
LILLGRUND (110 MW)Installation Year : 2007
BLIGH BANK PHASE 2(165 MW)
Topside Weight : 970 tonnesInstallation Year : 2016Water Depth : 10 metersSubstructure : MonopileDetailed Design : TopsideOwner/Client : Nobelwind/Bladt
Location : Belgian North Sea
PRINCESS AMALIA (120 MW)Installation Year : 2007
BALTIC 1 (48.3 MW)Installation Year : 2010
KRIEGERS FLAK KFA (200 MW)KRIEGERS FLAK KFB (400 MW)KRIEGERS FLAK KFE MODULEInstallation Year : 2018
NORTHWIND (216 MW)Installation Year : 2013
BLIGHT BANK PHASE 2 (165 MW)Installation Year : 2016
RENTEL (300 MW)Installation Year : 2018
SIEMENS OTM ALBATROS (112MW) Installation Year : 2019
HORNSEA I I OSS (1320 MW)HORNSEA I I RCSInstallation Year : Expected 2021
VINEYARD (800 MW)Installation Year : Expected 2022
MORAY 01 (316 MW)MORAY 02 (316 MW)MORAY 03 (316 MW)Installation Year : Expected 2021
NORTHWESTER II (224 MW)Installation Year : 2019
TRITON KNOLL (450 MW)TRITON KNOLL (430 MW)Installation Year : Expected 2021
TRITON KNOLL 01 (450 MW)
TRITON KNOLL 02 (430 MW)
Topside Weight : 1100 tonnesTP + Cage : 755 tonnesInstallation Year : 2018Water Depth : 27 metersSubstructure : MP/TP/CageDetailed Design : Topside/MP/TP/Cage Owner/Client : Innogy/Siemens
Location : UK North Sea
Location : German Bight
KASKASI II (325 MW)
Topside Weight : 1.250 tonnesInstallation Year : Expected 2021Water Depth : 38.3 metersSubstructure : JacketDetailed Design : Topside/MP/TPOwner/Client : Innogy/Bladt
VINEYARD (800 MW)
Topside Weight : 3040 tonnesJacket Weight : 2000 tonnesInstallation Year : Expected 2022Water Depth : 38.3 metersSubstructure : JacketDetailed Design : Topside/JacketOwner/Client : Vineyard Wind/Bladt
Location : US East CoastUS W
ATERS
KASKASI IIInstallation Year : -
ARCADIS OST 1 (247MW)Installation Year : Expected 2022
Location : Belgian North Sea
NORTHWESTER II (224 MW)
Topside Weight : 930 tonnesInstallation Year : 2019Water Depth : 31 metersSubstructure : MonopileDetailed Design : TopsideOwner/Client : Northwester II/Bladt
DETAILED DESIGNS
ARCADIS OST 1 (247 MW)
Topside Weight : 2.200 tonnesInstallation Year : Expected 2022Water Depth : 43.7 metersSubstructure : MP/TPDetailed Design : TopsideOwner/Client : Parkwind OST Gmbh
Location : German Baltic Sea
MORAY EAST 01 (316 MW)
MORAY EAST 02 (316 MW)
MORAY EAST 03 (316 MW)
Topside Weight : 1.252 tonnesInstallation Year : Expected 2021Water Depth : 22 metersSubstructure : JacketDetailed Design : TopsideOwner/Client : Edp renewables/Siemens
Location : UK North Sea
MAYFLOWER (1200 MW)Installation Year : Expected 2024ASIA AUSTRALIA NORTH AMERICA
Location : Danish Baltic Sea
PRINCESS AMALIA (120 MW)
Topside Weight : 650 tonnesInstallation Year : 2007Water Depth : 24 metersSubstructure : MonopileDetailed Design : TopsideOwner/Client : Eneco/Bladt
GUNFLEET SANDS (172 MW)
Topside Weight : 1.155 tonnesTransition Piece : 155 tonnesInstallation Year : 2008Water Depth : 15 metersSubstructure : MonopileDetailed Design : Topside Owner/Client : Ørsted
HORNS REV 2 (209 MW)
Topside Weight : 1.238 tonnesJacket Weight : 798 tonnesInstallation Year : 2008Water Depth : 13 metersSubstructure : JacketDetailed Design : Topside and JacketOwner/Client : Energinet.dk
LILLGRUND (110 MW)
Topside Weight : 670 tonnesInstallation Year : 2007Water Depth : 10 metersSubstructure : Concrete Gravity BaseDetailed Design : TopsideOwner/Client : Vattenfall/Bladt
Location : UK North Sea
Location : Danish North Sea
Location : Sweden Oresund
Location : Netherlands North Sea
Location : Danish Baltic Sea
NYSTED I (166 MW)
Topside Weight : 670 tonnesInstallation Year : 2003Water Depth : 6-10 metersSubstructure : Concrete Gravity BaseDetailed Design : TopsideOwner/Client : Ørsted
WORLD’S FIRST
BORKUM RIFFGRUND 2 (450 MW)
Topside Weight : 2.185 tonnesJacket Weight : 1670 tonnesInstallation Year : 2018Water Depth : 24 meters / 27 metersSubstructure : JacketDetailed Design : Topside and Jacket Owner/Client : Ørsted
Location : German Bight
BALTIC 1 (48 MW)
Transition Piece Weight : 1.100 tonnesInstallation Year : 2010Water Depth : 18 metersSubstructure : Monopile Detailed Design : TP/monopileOwner/Client : EnBW/Ballast Nedam
Location : German Baltic Sea
WALNEY 1 (183 MW)
WALNEY 2 (183 MW)
Topside Weight : 1.000 tonnesJacket Weight : 940/965 tonnesInstallation Year : 2010/2011Water Depth : 21/24 metersSubstructure : JacketDetailed Design : Topside and Jacket Owner/Client : Dong Energy
Location : UK Irish Sea
WEST OF DUDDON SANDS (389 MW)
Topside Weight : 1.520 tonnesJacket Weight : 1.180 tonnesInstallation Year : 2013Water Depth : 19 metersSubstructure : JacketDetailed Design : Topside and Jacket Owner/Client : Dong Energy and Scottish PowerLocation : UK Irish Sea
BORKUM RIFFGRUND 1 (320 MW)
Topside Weight : 1.835 tonnesJacket Weight : 1.685 tonnesInstallation Year : 2013 Water Depth : 24 metersSubstructure : JacketDetailed Design : Topside and Jacket Owner/Client : Ørsted
Location : German Bight
NORDSEE ONE (332 MW)
Topside Weight : 1.890 tonnesJacket Weight : 1.375 tonnesInstallation Year : 2016Water Depth : 29 metersSubstructure : JacketDetailed Design : Topside and JacketOwner/Client : RWE Innogy/Bladt
Location : German Bight
GODE WIND 01 (332 MW)
Topside Weight : 1.930 tonnesJacket Weight : 1.790 tonnesInstallation Year : 2015Water Depth : 30 metersSubstructure : JacketDetailed Design : Topside and JacketOwner/Client : Ørsted
Location : German Bight
GODE WIND 02 (332 MW)
Topside Weight : 1.930 tonnesJacket Weight : 1.790 tonnesInstallation Year : 2015Water Depth : 33 metersSubstructure : JacketDetailed Design : Topside and JacketOwner/Client : Ørsted
Location : German Bight
NORTHWIND (216 MW)
Topside Weight : 1.140 tonnesInstallation Year : 2013Water Depth : 20 metersSubstructure : MonopileDetailed Design : TopsideOwner/Client : Northwind Offshore Energy/Bladt
Location : German Bight
SIEMENS OTM ALBATROS (112 MW)
Topside Weight : 742Installation Year : 2019Water Depth : 39 metersSubstructure : MonopileDetailed Design : TopsideOwner/Client : EnBw/Siemens
Location : German Bight
KRIEGERS FLAK KFB (400 MW)
KRIEGERS FLAK KFE MODULE (220/150 KV)
Topside Weight : 1.675/685 tonnesInstallation Year : 2018Water Depth : 31/16 metersSubstructure : Concrete Gravity BaseDetailed Design : Topside/SubstructureOwner/Client : Energinet.dkLocation : Danish Baltic Sea
HORNSEA II OSS (1320 MW)
Topside Weight : 6.718 tonnesInstallation Year : Expected 2021Water Depth : 36 metersSubstructure : JacketDetailed Design : Topside and JacketOwner/Client : Ørsted
Location : UK North Sea
WORLD’S LARGEST
HORNSEA II RCS
Topside Weight : 1.852 tonnesInstallation Year : Expected 2021Water Depth : 32 metersSubstructure : JacketDetailed Design : Topside and JacketOwner/Client : Ørsted
Location : UK North Sea
Location : US East Coast
MAYFLOWER (1200 MW)
Topside Weight : 4.200 tonnesInstallation Year : Expected 2024Water Depth : 45 metersSubstructure : JacketDetailed Design : Topside and jacketOwner/Client : Mayflower Wind/BSR
US WATERS
REACTIVE C
OMPENSATION S
TATIO
N
Related Documents
