The certification scheme for training institutions Presentert av Ellington Wilkins Lead auditor ASAS Sertifisering AS.

The certification scheme for training institutions

Presentert av Ellington Wilkins

Lead auditor ASAS Sertifisering AS

ASAS SERTIFISERING ASASAS SERTIFISERING AS

Training institutions: 102Certified technical control: 54Both: 38Total: 194

Certification bodyCertification body

Third-party conformity assessment body operating certification schemes.

Impartiality

No commercial, financial or other pressures to compromise impartiality

Certification bodyCertification body

Confidentiality at all times

Commitment to the management of all information recieved or created during certification

Training requirementsTraining requirements All persons working with dangerous

equipment in Norway

Certified safety training is required for the following types of work equipment:

Gantry cranes and overhead travelling cranes (if use involves danger to life or health).

Tower cranes

Mobile cranes

Portal cranes

Training requirementsTraining requirements

Certified safety training is required for the following types of work equipment:

Cranes with a capacity greater than 2 tm when mounted on a truck or truck trailer

Lifting and stacking vehicles for goods with a permanent operator’s cabin on the vehicle

• Earth moving machines with an effect greater than 15 kW (20.4 hp).

CERTIFICATION SCHEMECERTIFICATION SCHEMEBased on specific requirements

Training institutions/Technical control entities

Regulation governing organisation and management, Workplace,

work activity, forskrift om administration criteria’s, Trainee guidelines & additional criteria’s

RegulationsRegulations

Regulation 1360 For Administrative requirements

Regulation 1356 For the workplace

Regulation 1357 Work operations

Regulation 1355 Organisation, management and participation

Example of the evaluation Example of the evaluation processprocess

Upon completion of this module, the trainee will be able to do the following:

1. Describe basic prestart activities for heavy equipment machinery.

2. Describe basic safety measures associated with operating heavy equipment.

3. Explain how to properly start, operate, and shut down the following types of heavy equipment:

Dozers, loaders, backhoes, excavators, compaction equipment, motor graders, scrapers, on road dump trucks, off-road dump trucks.

Certification processCertification process

– Application for certification– Accept of application / review– Document evaluation– Certification audit– Accept and correction of non - conformities– Verification– Certification documentation / certificate– Surveillence

Document evaluation Procedures for training in the use of earth moving

equipment

Routines for access to necessary equipment that are in good technical operation

Routines for access to qualified competent instructors

Routines for maintenance of competence

Documentation of the technical control of equipment by impartial third party

Document evaluation

Documentation of access to necessary and accepted literature

Documentation of acceptable course plan with allotted time

Routines/procedures for the examination of candidates (theoretical and practical)

Procedures for candidates with writing and or reading disabilities

Certification audit

Consists of confirmation/ verification of the before mentioned documentation

Verification of qualified instructors

Verification of the maintenance of competence of instructors

Verification of the participation of candidates

Verification of the use of theoretical literature/course materiel

Certification audit

Verification of the use of the required time

Verification of the theoretical examination of all candidates

Verification of access to and use of correct equipment for practical training

Verification of the practical examination of all candidates

Correction and accept of non-conformities

Based on the type of non-conformity (severe or non-severe)

A time frame for correcting the non-conformity will be agreed upon.

Review and accept of non-conformity.

Certification documentation

Four years

Requires annual surveillance by the certification body

Must adhere to the certification scheme and any directions from the certification body.

Surveillance

Annual audit/surveillance of the certified entity

Re-certification after four years

SertifiseringsrevisjonenSertifiseringsrevisjonen

Re-sertifisering

SERTIFIKAT – CERTIFICATE

Organisasjons nr.: Org. nr.

Sertifiseringsnummer ATS-

Har dokumentert og demonstrert kunnskap i kravene for produktsertifisering og kravene i Forskrift om bruk av arbeidsutstyr, best. nr. 555, §50

GYLDIGHETSOMRÅDE: Sertifisert for sikkerhetsopplæring av førere/operatører av

arbeidsutstyr som er nevnt i §49, best. nr. 555, herunder ;

- Løfte og stablevogner for gods

Sertifiseringen forutsetter regelmessig oppfølging frem til sertifikatets utløpsdato.

Virksomheten er selv ansvarlig for utført opplæring

1. gang sertifisert: Utstedelsesdato: Gyldig til:

_________________________________

___________________________________

Appreciate your attentionAppreciate your attentionThank youThank you