1 of © Boardworks Ltd 2010
Jan 07, 2016
1 of 38 © Boardworks Ltd 2010
2 of 38 © Boardworks Ltd 2010
3 of 38 © Boardworks Ltd 2010
In aldehydes the carbonyl group is at the end of the carbon chain and so has at least one hydrogen attached to it.
The carbonyl group (>C=O) is the functional group found in compounds such as aldehydes, ketones, and carboxylic acids.
In ketones the carbonyl group is in the middle of a carbon chain and so has two alkyl groups attached to it.
The carbonyl group
4 of 38 © Boardworks Ltd 2010
Representing aldehydes and ketones
Aldehydes and ketones cannot be distinguished by their molecular formula because they have the same functional group.
Both have the molecular formula C3H6O
What is the molecular formula of the aldehyde and ketone below?
an aldehyde a ketone
5 of 38 © Boardworks Ltd 2010
Representing aldehydes and ketones
Aldehydes and ketones are therefore represented either using displayed or structural formulae.
CH3CHO CH3CH2CH2CHO
CH3COCH2CH3 CH3CH2COCH2CH3
6 of 38 © Boardworks Ltd 2010
Naming aldehydes
Aldehydes are named using the suffix –al, and follow the same conventions as for naming alkanes.
ethanal propanal
2-methylbutanal
7 of 38 © Boardworks Ltd 2010
Like alkenes, ketones with four or more carbon atoms display positional isomerism because the carbonyl group may appear between different carbon atoms. In these cases, a number is used before the –one to indicate the first carbon involved.
Naming ketones
Ketones are named using the suffix –one.
propanone hexan-3-one
8 of 38 © Boardworks Ltd 2010
Naming aldehydes and ketones activity
9 of 38 © Boardworks Ltd 2010
Synthesis of aldehydes and ketones
10 of 38 © Boardworks Ltd 2010
Properties of aldehydes and ketones
The carbonyl group is polar due to the greater electronegativity of oxygen (3.4) than carbon (2.6). This influences the properties of aldehydes and ketones, such as solubility.
δ+ δ-
Small aldehydes and ketones are soluble in water due to hydrogen bonding between a lone pair on the oxygen of the carbonyl group and the hydrogen of the water.
As size increases, solubility decreases due to interference in hydrogen bonding by the hydrocarbon ‘tails’ of the aldehydes/ketones.
11 of 38 © Boardworks Ltd 2010
Boiling points: a comparison
12 of 38 © Boardworks Ltd 2010
Boiling points and intermolecular forces
The general increase in boiling points from alkanes to aldehydes/ketones and alcohols is due to the intermolecular forces between each type of molecule.
Alkanes are only held together by van der Waals forces. These forces increase with the size/length of a molecule.
The polar carbonyl group in aldehydes and ketones means that as well as van der Waals forces, these molecules are also held together by dipole–dipole interactions.
Alcohols are held together by van der Waals forces and dipole–dipole interactions. In addition, these molecules can form hydrogen bonds with each other, due to the slightly positive hydrogen atom of the hydroxyl group.
13 of 38 © Boardworks Ltd 2010
14 of 38 © Boardworks Ltd 2010
Reactivity of the carbonyl group
Some of the chemical properties of aldehydes and ketones result from the polar nature of the C=O bond.
The positive charge on the carbon atom makes it open to attack by nucleophiles.
Although double bonds require more energy to break than single bonds, compounds with double bonds tend to be more reactive as addition reactions are possible.
Aldehydes and ketones can be reduced, forming primary and secondary alcohols respectively.
Aldehydes may also be oxidized to carboxylic acids.
δ+ δ-
15 of 38 © Boardworks Ltd 2010
Nucleophilic addition using cyanide
16 of 38 © Boardworks Ltd 2010
Dangers of HCN
Hydrogen cyanide (HCN) is highly volatile liquid (boiling point 26 °C), which has a faint bitter almond smell.
In solution, hydrogen cyanide partially dissociates:
A safer alternative is potassium cyanide, which is a solid at room temperature and is therefore easier to handle. An acidified solution contains both the H+ and CN- ions.
Hydrogen cyanide is highly toxic because it inhibits a mitochondrial enzyme that is essential for respiration. Being so volatile and flammable, it is difficult to handle safely.
HCN(aq) H+(aq) + CN-
(aq)
17 of 38 © Boardworks Ltd 2010
Reduction of aldehydes and ketones
18 of 38 © Boardworks Ltd 2010
Distinguishing aldehydes & ketones
19 of 38 © Boardworks Ltd 2010
Detecting a carbonyl group
20 of 38 © Boardworks Ltd 2010
Reactions of aldehydes and ketones
21 of 38 © Boardworks Ltd 2010
Aldehydes and ketones: true or false?
22 of 38 © Boardworks Ltd 2010
23 of 38 © Boardworks Ltd 2010
Carboxylic acids
Carboxylic acids have a carboxyl group(-COOH) consisting of a carbonyl group and a hydroxyl group attached to the terminal carbonyl carbon.
Carboxylic acids are named using the suffix –oic acid.
Ethanoic acid is the acid that gives vinegar its sharp taste and smell. It is also important in the chemical industry and about 6.5 million tonnes are used worldwide each year
Methanoic acid is the simplest carboxylic acid and is found in bee and ant stings.
24 of 38 © Boardworks Ltd 2010
Naming carboxylic acids
25 of 38 © Boardworks Ltd 2010
Boiling points of carboxylic acids
26 of 38 © Boardworks Ltd 2010
Synthesis of carboxylic acids
27 of 38 © Boardworks Ltd 2010
Carboxylic acids can be created by the oxidation of aldehydes by oxidizing agents such as potassium dichromate(VI).
They can also be created by the oxidation of primary alcohols, again using potassium dichromate(VI).
Oxidation of 1° alcohols and aldehydes
28 of 38 © Boardworks Ltd 2010
Carboxylic acids can also be prepared by the hydrolysis of nitriles.
Hydrolysis of nitriles
The nitrile is refluxed with water and hydrochloric acid. The carboxylic acid can then be distilled from the reaction mixture.
29 of 38 © Boardworks Ltd 2010
30 of 38 © Boardworks Ltd 2010
Reactivity of carboxylic acids
The reactivity of carboxylic acids results, in part, from the polarization of its bonds.
The reactions of carboxylic acids include:
neutralisation – the carboxylic acid loses a proton to form a carboxylate salt
nucleophilic substitution – the positively-charged carbon is attacked by a nucleophile, resulting in substitution of the OH group
esterification – reaction with an alcohol to form an ester.
δ+
δ-
δ-
δ+
31 of 38 © Boardworks Ltd 2010
Forming the carboxylate ion
Carboxylic acids are weak acids and partially dissociate in aqueous solution:
carboxylate ion
The negative charge is delocalized across the carboxylate group, resulting in a more stable ion. The delocalization is represented by adding a second dotted line to the carbon oxygen bonds, which are both equivalent.
32 of 38 © Boardworks Ltd 2010
Reactions with carbonates
Carboxylic acids are the only organic compounds that are strong enough acids to react with either sodium carbonate or sodium hydrogencarbonate.
Reaction of ethanoic acid and sodium carbonate:
2CH3COOH + Na2CO3 → 2CH3COONa + CO2 + H2O
sodium ethanoate
Reaction of methanoic acid and sodium hydrogencarbonate:
HCOOH + NaHCO3 → HCOONa + CO2 + H2O
sodium methanoate
The formation of bubbles of carbon dioxide gas makes these reactions useful as a test for carboxylic acids.
33 of 38 © Boardworks Ltd 2010
Reactions with alkalis
Carboxylic acids will react with alkalis, such as sodium hydroxide, in a neutralization reaction:
RCOOH + NaOH → RCOONa + H2O
Reaction of propanoic acid and sodium hydroxide:
Reaction of butanoic acid and potassium hydroxide:
CH3CH2COOH + NaOH → CH3CH2COONa + H2O
sodium propanoate
CH3CH2CH2COOH + KOH → CH3CH2CH2COOK + H2O
potassium butanoate
34 of 38 © Boardworks Ltd 2010
Carboxylic acids: a summary
35 of 38 © Boardworks Ltd 2010
36 of 38 © Boardworks Ltd 2010
Glossary
37 of 38 © Boardworks Ltd 2010
What’s the keyword?
38 of 38 © Boardworks Ltd 2010
Multiple-choice quiz