The 3.6m Yurt kit construction Manual/Photos

The 3.6m Yurt kit construction Manual/PhotosPlease be advised that Goulburn Yurtworks will not be held responsible for any mishaps that may happen to persons during the construction of a Yurt kit supplied by Goulburn Yurtworks.

FoundationsDefinitely something to get right! Levelling piers and concreting them in. Placing ant caps on.

Floor framesPlacing the two floor frames down and bolting them together.

Tie downAttaching the chain the pier and the hardwood floor frame

FlooringNailing down the Pyneboard sheets to hardwood frames

Wall framesWall frames 1 by 1 are positioned and helped by a prop at the back to stand up. Then you start screwing them down

Wall framesScrewing down the wall frames

Wall Frames½ way there!! Positioning walls where you want them, remember HAVE FUN!

Wall framesWall frames up and hammering in the gang nails

Wall framesGang nails hammered in to tops of Yurt walls

Roof FramesThe use of the prop!

Roof FramesWith the use the prop supplied by us, position your roof frames and bolt together

Roof FramesAll bolted together

Roof framesFoundations in, floor frames down, floor sheets on, Walls up and roof frames bolted together in position, then attach your cable

Tension CableNow you are ready to place your cable in and tension it up.

Tension CableA good example of how your cable and roof frames should look!

Roof sandwichesAttach the first part of your sandwiches to the frame

Roof SandwichesMind yourself they can be heavy, attach as above

Roof SandwichesAttach second part of the sandwich to the roof

Roof SandwichesMake sure the bottom flaps and the over flaps are positioned properly

Roof FlashingsBe sure the waterproof material is slid up

CupolaLastly place your cupola on top and then your cover strips and fascias, Your Yurt is now………..

Your Finished Yurt FINISHED……….Now you are ready to deck out your little Yurt to suit your needs.