1) Using the template , cut out 2 of each star in felt provided , as you can see the lower numbers are the biggest stars and will be the base of your Tree. 2) You can choose which felt colour you want to use for each secon 3) When you have them cut out layer them on top of each other like in the Image shown 4) Don’t forget to cut out 2 of the Yellow felt for the star at the top of your tree 5) Using a needle and thread , go around the two yellow stars with a running stch or blanket stch all the way around , e and knot and cut 6) Thread the needle again and double it and put a knot at the end . 7) Now starng from the boom of your tree , thread the needle through the mid- dle at the boom of your Christmas tree , all feed it all the way thought to the top of the tree , gently pull a lile . 8) Take your gold star and put the needle through the boom though to the top of the point as shown in the diagram That’s is your done THEN take a photo of it completed and send it to me on the email below :- [email protected] THINGS NEEDED FELT PIECES THREAD NEEDLE SCISSORS STAR TEMPLATE INSTRUCTIONS