Thank you for the purchase of the BlitzRCworks 86 …€¦ · Your F‐86 Sabre is an awesome replica of the Full Size F‐86! Extreme detail in the appearance that commands attention

Thank you for the purchase of the BlitzRCworks F‐86 Electric Radio Control Jet!  The BlitzRCworks F‐86 is a High Performance Electric Ducted Fan Jet which is ideal for the Intermediate to Advanced Pilot.   

Congratulations on owning your own piece of flying history!  The F‐86 is a classic Jet in the world of aviation!  Banana Hobby and BlitzRCworks is so very proud to be able to bring this Flying Radio Control model to you!  This flying hobby is about a passion for flight and a passion for aircrafts!  It is a chance to pilot your own piece of history!  Your F‐86 Sabre come packed full of state of art electronics!  A powerful brushless motor and brushless speed control is at the of this flying machine! ( in the RTF or PNP package).  The F‐86 exhibits a very docile flight character for the sport flier!  For the speed thrilled, aerobatic yearning pilot, peg that throttle stick forward and OWN the sky with Speed and Aerobatics!  Your F‐86 Sabre is an awesome replica of the Full Size F‐86!  Extreme detail in the appearance that commands attention at any air field you visit!  So fly with confidence as BlitzRCworks and Banana Hobby are proud to bring you this quality EDF F‐86 Sabre! 

In order to Fly your F‐86 EDF, please insure you read through and follow the instructions provided here carefully before operating your Jet for the first time.   

You alone are responsible for the safe operation of your radio controlled model.  Children should only be permitted to operate this model under the supervision and instruction of an experienced adult.   

If you may have any questions about the safe operation of our Radio Controlled aircraft, please contact your local hobby retailer for professional advice or you can contact Banana Hobby Customer Service at:  (626)248‐2888 or you can log on to Live Chat between the hours of 9am to 6pm Mon to Fri PST.  (12 to 1pm PST Lunch Break).  The Live Chat option is provided at www.bananahobby.com home page.  You may also send an email to: [email protected] 

Radio Controlled models are very demanding and potentially dangerous machines.  These products require a high level of technical knowledge and skill from the operator.  together with a responsible attitude will yield in great experiences. Please always keep the instruction manual handy for reference even after the build.  Can be used as a quick reference guide.  

1 | P a g e  

2 | P a g e  

WARNING: This BlitzRCworks F‐86 Electric R/C Aircraft is NOT A TOY. It is not suitable for children under 14 years of age.  Banana 

Hobby and BlitzRCworks are not held liable for misuse of this product.  

1.  Do not Fly your BlitzRCworks F‐86 near:  Houses, Buildings, Playgrounds, Traffic, Railways, Airports, Overhead Power Lines and or telephone poles.  Do not fly near heavy populated areas and over people.   

2.  The ideal flying location is a large empty field  or wide open space with no people present.  If you are flying at a model airfield, make sure you contact the airfield's administrator for proper permission. 

3.  The battery should not be overcharged or charged unattended at any time.  Do not charge near any flammable material or on top of any flammable material.   

4.  If you are flying on 72mhz, always check with other pilots flying in your same area or near your same area for any frequency conflicts.  Two 72mhz on the same channel cannot be flown at the same time.  If you are using 2.4gHz, there is no need for frequency checks. 

5.  Do not fly in strong winds or any adverse weather conditions. 

6.  Do not attempt to try and catch the plane during flight.  This can cause extreme injury and harm. 

7.  Children under the age of 14 must not operate this product alone.  They must be accompanied by an experience adult at all times.   

8.  This model aircraft is designed to be powered by an electric motor.  Flying this model aggressively may lead to serious accidents or injuries. 

9.  Do not touch the FAN UNIT when it is spinning as it can cause serious injuries.   

10.  Do not ever power on your F‐86 first without FIRST turning on your Transmitter.  Do not ever Turn OFF your Transmitter FIRST after a flight without disconnecting the battery to the aircraft FIRST.  Doing so may cause loss of communication between the aircraft and the transmitter resulting in the aircraft being damaged.   

Features: Powerful 70mm Electric Ducted Fan Jet Perfect aerobatics maneuvers, such as rolls, loops, cobra maneuvers, and etc… Stable inverted flight Excellent pitch stability Steerable nose wheel Molded foam parts are easily replaceable Wingspan: 1103mm (43.4 in) Length: 1085mm (42.7 in) Flying Weight: 1500g (52.9 oz) Wing Area: 15dm2 (232 sq in) Wing Load: 100g/dm2 Drive System: Ducted Fan 70mm w/ Thrust Tube (Powerful 2836KV Outrunner Brushless Motor) Servo: 11X 9g high speed micro servos Speed Controller: 45 Amp Brushless Speed Control w/ 5A BEC Retract System: Air Retracts

3 | P a g e  

4 | P a g e  

5 | P a g e  

6 | P a g e  

7 | P a g e  

8 | P a g e  

9 | P a g e  

10 | P a g e  

11 | P a g e  

Congratulations on the completion of the main build on your New BlitzRCworks F-86 Sabre! The only remaining steps are to connect the servo leads to your radio system and perform a few final adjustments!

Channel Assignments:

Channel 1: Ailerons Channel 2: Elevator Channel 3: Throttle Channel 4: Rudder Channel 5: Retracts Channel 6: Flaps Channel 7: Fuselage Air Brakes You may choose to combine the Airbrakes on the fuselage to the flaps if you wish BATT Channel: External BEC

Control Surface Throws

These are the recommended control surface throw amounts. Can be adjusted to the individual's flying style as you please.

Elevator- 8mm (5/16") Aileron- 10mm (13/32") Rudder- 8mm (5/16") Flaps- 25mm (31/32") Center of Gravity

Center of Gravity is: 180mm From the leading edge of the main wing at the ROOT . (center of the main wing root)

*RETRACT Fill Pressure to NO MORE THAN 100PSi. **

12 | P a g e  

13 | P a g e  

Pre-Flight Check 1. Check for any broken or damaged parts on main wing, fuselage or tail.

2. Check the fan, adapter and all screws are securely fastened.

3. Always check there are no other pilots using the same frequency (band) in the same area.

4. Securely fasten the main wing.

5. Make sure the power switch on the plane is OFF before connecting the battery. Make sure

you stay clear of the fan.

6. Switch the transmitter ON, then switch the receiver ON.

7. In case motor starts rotating accidentally, have an assistant hold the fuselage of the plane

securely.

8. Check that the plane responds properly to control signals.

9. Test the range of the radio signal. Step back about 65 feet (20m) and check for interference.

10. Check the plane control surfaces if functioning properly.

11. Make sure retract air tank fill pressure to no more than 100 PSI.

FAQ:

Q: Why are my retracts lowering in the DOWN position by itself after only 1 minute into my flight? A: There is a slow leak in the air hose lines. Pump 80 PSi into the holding tank and go to a quiet room to determine if you can hear an air leak. If you can not, you will need to apply drops of soapy water to each of the joints where the air line meets a connector.

Q: What do I do if my "Check Valve" is leaking air? A: Put one drop of bearing oil into the check valve and use a tooth pick to press the Check Valve Flap open and let it spring close. Press the flap a few times to lubricate the valve.

Q: Why is my retracts not functioning when it is filled with air? A: Air Pressure is too low. Fill to 100PSi minimum.

Q: Why are my retracts not functioning when my air tank has 100PSi of air? A: Check the servo with the pushrod attached controlling the Air Solenoid. Make sure the servo is moving and the solenoid is sliding. If not, put a couple of drops of oil on the cylinder slide on the solenoid.

14 | P a g e  

Release of Liability

Banana Hobby, BlitzRCworks, its affiliates, manufacturers, distributors, or retail partners shall not be held liable or responsible for any accident, injury, to persons, or damage to property resulting from the use, misuse, or the abuse of any Banana Hobby/BlitzRCworks product. In purchasing a Banana Hobby/BlitzRCworks product, the User agrees to accept responsibility for all such risks.

General Warranty Policies

Banana Hobby products are warranted to be free of material and workmanship defects for a period of 30 days from the date of purchase. If a component is defective or was not correctly made, Banana Hobby will, at its sole discretion, repair or replace the item or its components free of charge granted it falls within the 30 day warranty period and the policies listed on our website. This warranty does not cover normal wear and tear, CRASH DAMAGE, modifications, failure to perform routine maintenance, or any damages arising as a result of improper use.

User is required to read all instruction manuals and follow the manufacturer’s guidelines as well as the pre-flight checklist. BananaHobby.com DOES NOT accept responsibility for injury, crash or damage, loss of kits or accessories, or parts and materials that occurs during the use of any radio-controlled model. Great care shall be taken when using RC products.

Notice of Rights

All rights reserved. No part of this box may be reproduced or transmitted in any form at any time, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Banana Hobby.

Actual Product may vary from product shown. Product subject to change.

This product contains chemicals known in the State of California to cause Cancer, Birth Defects, and other Reproductive Harm.

This product is not intended for use by person or persons, including children, with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of this product by a person responsible for their safety.