Thank you for purchasing EuropAce Robotic Vacuum Cleaner. For safety purpose, please read this operating instruction manual carefully before using and keep it for future reference. This product is distributed by Strategic Marke ng (S) Pte Ltd If there is any technical amendment for the product, it will be edited on the updated version of the instruc on manual without prior no e. The pictures shown in the instruc on manual is only for illustra on purpose only. If the appearance or colour of the product is modified, please refer to the actual appliance as a standard.
30
Embed
Thank you for purchasing EuropAce Robotic Vacuum Cleaner ......Mop Cleaning Mopping Plate Operation Guide Water Inlet 水箱 Attach the Mopping Cloth to the velcro on the mop plate
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Thank you for purchasing EuropAce Robotic Vacuum Cleaner.For safety purpose, please read this operating instruction manual carefully before using and keep it for future reference.
This product is distributed by Strategic Marke ng (S) Pte Ltd
If there is any technical amendment for the product, it will be edited on the updated version of the instruc on manual without prior no e. The pictures shown in the instruc on manual is only for illustra on purpose only. If the appearance or colour of the
product is modified, please refer to the actual appliance as a standard.
01 02 03 04
05 06 07 08 09 10
12 13 14 15 16 17
18 19 20 21 22 23
24 25 26 27
01 02 03 04
05 06 07 08 09 10
12 13 14 15 16 17
18 19 20 21 22 23
24 25 26 27
Warnings
Please do not get close to heat source
please charge 12 hours at least to prolong the
Please be careful to use vacuum
afety Instruc ons
of
01 02 03 04
05 06 07 08 09 10
12 13 14 15 16 17
18 19 20 21 22 23
24 25 26 27
01 02 03 04
05 06 07 08 09 10
12 13 14 15 16 17
18 19 20 21 22 23
24 25 26 27
主机及附件
1 1
1 2 3 4
5 6 7 8
1
1
1
1
1
2
1
1
2
3
4
5
6
7
8
9
9
(EAD 248RV)
10 1
Virtual wall
AC Adapter
Cleaning tool
Side brush
Hepa
Water tank/Mop
User manual
01 02 03 04
05 06 07 08 09 10
12 13 14 15 16 17
18 19 20 21 22 23
24 25 26 27
Please use only the recommended AC Adaptor EAD 248RV
3.Edge cleaningPress the button on the remote controller ,the robot will start edge cleaning .
4.Automatic rechargeIn cleaning model ,the robot will automatically return to the charging station when the power is run out or press the button on the remote controller .
In mopping model ,the robot will mop only ,the fun motor will stop working .
Just press the button or the clean button on the remote controller the robot will plan to clean automatically ,and the robot will adjusted route accordingto different ground environment automatically .After finish cleaning ,or run out of power ,the robot will go back to the charging station automatically.
Product function and features
01 02 03 04
05 06 07 08 09 10
12 13 14 15 16 17
18 19 20 21 22 23
24 25 26 27
01 02 03 04
05 06 07 08 09 10
12 13 14 15 16 17
18 19 20 21 22 23
24 25 26 27
“ ”Low noise
power
icon
go
go“ ”the button the robot will stops cleaning
9
01 02 03 04
05 06 07 08 09 10
12 13 14 15 16 17
18 19 20 21 22 23
24 25 26 27
AUTOOK
EDGE MOP
PLAN
ON/OFF Button
RECHARGING MODE
AUTO CLEAN/ Setting Time Mode
EDGE CLEANING MODE
MOP CLEANING MODE
STRONG/MUTE
SCHEDULING CLEAN MODE
SETUP TIME
DIRECTION(FORWARDS, BACKWARDS, LEFT, RIGHT)
01 02 03 04
05 06 07 08 09 10
12 13 14 15 16 17
18 19 20 21 22 23
24 25 26 27
Note: Do not use a non-native battery
Battery installation1.When installing the battery,please use a screwdriver to loosen the screws and open the battery pad .2.Please fasten 2 terminals.installing the battery3.Screw up the battery pad.
Scheduled and time settingHour/Minute settingIn standby mode ,press button ,and then press“ ”and“ ”to cycle through HOUR and MINUTE. Press“ ”to increase and“ ”to decrease .Press “OK” to save the scheduled hour and minute setting and enter standby mode.
Scheduled time setting
b.Scheduled time cancelling
a.Scheduled hour and minute:
In standby mode ,press button PLAN ,and then press and to cycle through HOUR and MINUTE. Press to increase and to decrease .Press “OK” to save the scheduled hour and minute setting and enter standby mode.
In standby mode,press button PLAN ,then press the button POWER on the remote controller. Notes: After any setting, you can press power button to exit and enter standby mode.
Product Operating
01 02 03 04
05 06 07 08 09 10
12 13 14 15 16 17
18 19 20 21 22 23
24 25 26 27
(Please use only the recommended AC Adaptor EAD 248RV)
01 02 03 04
05 06 07 08 09 10
12 13 14 15 16 17
18 19 20 21 22 23
24 25 26 27
01 02 03 04
05 06 07 08 09 10
12 13 14 15 16 17
18 19 20 21 22 23
24 25 26 27
Mop Cleaning
Mopping Plate Operation Guide
Water Inlet水箱
Attach the Mopping Cloth to the velcroon the mop plate 1、2、3、4、5、
Firmly push the Mop Plate into the furrows1,2,3,4,5,6 until you hear a click sound
Fill the water tank through the water inlet onthe mopping plate.(as Image 1, 2),Attach the Mopping Cloth to the velcro on the mop plate(as Image 3)
Water Outlet
Reminder:1.Please remove the mopping plate from the unit, before filling up the water tank.2.Please make sure to switch off the unit when installing the mopping plate on the unit.3.Please make sure the mopping cloth is not too wet, wring out the Excess water before attaching it on the mopping plate.
Image 1
Firmly push the Mop Plate into the furrowsuntil you hear a click sound(as Image 4)
Image 2 Image 3
Image 4
6
1
1 2
2 3
4
4
55
3
11
01 02 03 04
05 06 07 08 09 10
12 13 14 15 16 17
18 19 20 21 22 23
24 25 26 27
01 02 03 04
05 06 07 08 09 10
12 13 14 15 16 17
18 19 20 21 22 23
24 25 26 27
Error Code
eason olu on
E 1 e Wheel l ed up Place robot to a ne at oor
E 3 ght heel l ed up Place robot to a ne at oorE 4 e heel s entangled stuck Clean tE ght heel s entangled stuck Clean tE 6 neven ground Place robot to a ne at oorE de brush s t n ng Clean tE 8 Install code disc correctly E 9 Coll s on sensor s stuck Clean coll s on detec on plateE 1 ong me no coll s on Check f front component s fa lureE 12 Ground sensor s blocked or fa lure Clean the ground sensorE 1 Vacuum motor dust motor s stuck Clean the motorE 16 Electr c t o more than 3 Clean the movable accessor esE 1 Po er s tch s o dur ng charg ng Please turn t on then charge