PLASMA CUTTING The new series of Torches without High Frequency Start TH TH TH TH TH -70 -70 -70 -70 -70 new new new new new TM TM TM TM TM -70 -70 -70 -70 -70 new new new new new TH TH TH TH TH -125 -125 -125 -125 -125 new new new new new TM TM TM TM TM -125 -125 -125 -125 -125 new new new new new TH TH TH TH TH -160 -160 -160 -160 -160 new new new new new TM TM TM TM TM -160 -160 -160 -160 -160 new new new new new Higher performances Cleaner cut Faster speed TEC.MO. s.r.l. Via Rio Fabbiani 8 - 40067 RASTIGNANO - BOLOGNA - ITALY E-mail: [email protected]
13
Embed
TH-70 new TM-70 new TH-125 new TM-125 new TH-160 new TM … · 2017. 5. 15. · Replacement Parts TH-70 Torch parts Item Description Code 1 TH-70 Hand Torch Head 03600 1a O-Ring 07300.60
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
PLASMA CUTTING
The new series of Torcheswithout High Frequency Start
Torches and LeadsTH-125 Hand Torch, 6m (20 ft) Leads, Coaxial Cable 03721CXTH-125 Hand Torch, 12m (40 ft) Leads, Coaxial Cable 03726CXTH-125 Lead Assembly, Hand, 6m (20 ft) Length, Coaxial Cable 03781CXTH-125 Lead Assembly, Hand, 12m (40 ft) Length, Coaxial Cable 03786CX
AccessoriesN/S Circle Cutting Attachment 5186517 BEVEL TOOL 51880
THTHTHTHTH-125-125-125-125-125
Standard Layout
Air or NAir or NAir or NAir or NAir or N22222
MonogasMonogasMonogasMonogasMonogas
Torches with different connectors available on request.
2017-05-A-THplasma cutting torches
8
Replacement Parts TM-125TM-125TM-125TM-125TM-125
Current : 40-125 AmpsDuty Cycle: 125 Amps at 60%Gas: Air/N2Gas Pressure: 72-87 PSI (5.0-6.0 bar)Gas Flow at 125A: 630 SCFH (295 lpm)Pilot : Electrode to Tip (15-18A)Ignition: Without HF
TMTMTMTMTM-125-125-125-125-125
For the correct operation please use:3-Ways Solenoid Valve, inside orifice4.5-5.5mm - (0.178-0.217 inches)
Torches and LeadsTH-160 Hand Torch, 6m (20 ft) Leads, Coaxial Cable 03921CXTH-160 Hand Torch, 12m (40 ft) Leads, Coaxial Cable 03926CXTH-160 Lead Assembly, Hand, 6m (20 ft) Length, Coaxial Cable 03981CXTH-160 Lead Assembly, Hand, 12m (40 ft) Length, Coaxial Cable 03986CX
AccessoriesN/S Circle Cutting Attachment 5186815 BEVEL TOOL 51886
THTHTHTHTH-160-160-160-160-160
Standard Layout
Air or NAir or NAir or NAir or NAir or N22222
MonogasMonogasMonogasMonogasMonogas
Torches with different connectors available on request.
2017-05-A-THplasma cutting torches
12
45-85A 105-160A
45-85A 105-160A
Replacement Parts TM-160TM-160TM-160TM-160TM-160
Current : 45-160 AmpsDuty Cycle: 160 Amps at 60%Gas: Air/N2Gas Pressure: 72-87 PSI (5.0-6.0 bar)Gas Flow at 160A: 850 SCFH (420 lpm)Pilot : Electrode to Tip (22-25A)Ignition: Without HF
TMTMTMTMTM-160-160-160-160-160
For the correct operation please use:3-Ways Solenoid Valve, inside orifice4.5-5.5mm - (0.178-0.217 inches)
2
45A85A
105A160A
StandardConnection
Euro Connector
1
1a
5 6 8
9 10
11 12
13
3
4
14
7
IEC 60974-7
plasma cutting torches 2017-05-A-TH
13
TMTMTMTMTM-160-160-160-160-160Replacement Parts TM-160TM-160TM-160TM-160TM-160