1 DVI-100 Digital Voice Interface for TETRA-Infrastructure About TETRA • TETRA (TErrestrial Trunked RAdio) is a digital standard similar to GSM for voice and data applications. • All voice data will be processed and encoded into a digital bit stream at the sender side and decoded back to “analog audio” on the receiver side. • During the whole transmission process within the TETRA infrastructure this digital voice data remains a digital 1-0-1… bit stream.
12
Embed
TETRA - SCADA and Telemetry Solutions - · PDF file1 DVI-100 Digital Voice Interface for TETRA-Infrastructure About TETRA •TETRA (TErrestrial Trunked RAdio) is a digital standard
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
1
DVI-100
Digital Voice Interface for
TETRA-Infrastructure
About TETRA
• TETRA (TErrestrial Trunked RAdio) is a
digital standard similar to GSM for voice
and data applications.
• All voice data will be processed and
encoded into a digital bit stream at the
sender side and decoded back to “analog
audio” on the receiver side.
• During the whole transmission process
within the TETRA infrastructure this digital
voice data remains a digital 1-0-1… bit
stream.
2
The CoDec
• The CoDec (Coder / Decoder) used for the TETRA voice
process operates using an so called ACELP algorithm.
• (ACELP Algebraic CELP, CELP Code-Excited Linear
Predictive)
• The result is a fantastic TETRA audio quality for
special use in extreme environment as for Police,
Firefighters, Ambulance and other (industrial)
applications
DVI-100
• The DVI-100 (Digital Voice Interface) is a
special TETRA terminal, that feeds all
received TETRA voice signals to its
Ethernet (IP) port and vice verse, without
any conversion to analog. So there is no
reduction of the original TETRA voice
quality.
• Additional also Status and SDS messages
are forwarded to the DVI Ethernet port and
sent to a (any) destination IP (and vice
verse).
3
DVI-100
• The DVI-100 can be operated in Server and in Client
Mode and can be used as follows:
– DVI Client to DVI Server [Back-to-Back]
– DVI Server to Infrastructure switch
– DVI Server to PC / iPhone / (iPad)
– TETRA MicroSPOT – DVI in DMO mode
Back To Back
4
Through Satellite Link
Through Satellite Link
5
Fallback Mode
6
TETRA to non-TETRA
DVI100 with multiple group talks
7
DVI-100 in DMO mode
• The DVI-100 can be operated in DMO Mode
and can be used as a TETRA Micro-Spot:
– Connected to a DVI-Server
– Connected to a PC / iPhone / iPad
– Connected to a TETRA Infrastructure switch
8
9
DVI-100 Features
• Connect TETRA networks of different manufacturer
• Connect TETRA networks with different frequencies (380