Tetlow Kilns & Furnaces. HILLDAV INDUSTRIES ARE AGENTS FOR At Hilldav we have been making and selling kilns for over 38 years. In that time we have come to know what makes a good kiln. Reliability A kiln that will fire and keep on firing as you want. Simplicity A kiln that is simple to operate. Dependable A kiln with a full back up with parts and service. As agents for Tetlow Kilns we not only sell but do the full back up, so when you get a Tetlow kiln from us you don't just get a kiln you get the knowledge that we are there to make sure your kiln keeps on firing well into the future. We sell a range of Tetlow Electric kilns in Front and Top loading styles, look through the infor- mation in the following pages and contact us if you need more information. CERAMIC & CRAFT TOP LOADING HEX- AGONAL KILNS LARGE FRONT LOADING KILNG SMALL SINGLE PHASE KILNS. Hilldav Industries Pty. Ltd. 9 Vanessa Avenue Baulkham Hills NSW 2153 Telephone: 02 9688 1777 Mobil 0408788717 E-mail: [email protected]Tetlow Kilns are: Environmentally friendly. Low density hot face insulating brick (fibre free). Economical to operate. One of Australia’s most experienced Kiln manufacturers. Australia’s largest range, 32 standard sizes/custom sizes available. Over 40 Years experience established 1963. 15,000 Kilns and Furnaces now in use throughout Australia & overseas. Kanthal A1 elements. Fast firing to 1300 C. Safety switch/energy regulator/warning light standard on all electric kilns. Types available, Front Load, Top Load, Octagonal. LAB & DENTAL KILNS
7
Embed
Tetlow Kilns & Furnaces. - Hilldav Industrieshilldav.com.au/wp-content/uploads/2013/07/TETLOW-Kilns2.pdf · 2014-06-23 · Tetlow Kilns & Furnaces. HILLDAV INDUSTRIES ARE AGENTS FOR
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Tetlow Kilns & Furnaces.
HILLDAV INDUSTRIES ARE AGENTS FOR
At Hilldav we have been making and selling kilns for over 38 years. In that time we have come to
know what makes a good kiln.
Reliability A kiln that will fire and keep on firing as you want.
Simplicity A kiln that is simple to operate.
Dependable A kiln with a full back up with parts and service.
As agents for Tetlow Kilns we not only sell but do the full back up, so when you get a Tetlow kiln
from us you don't just get a kiln you get the knowledge that we are there to make sure your kiln
keeps on firing well into the future.
We sell a range of Tetlow Electric kilns in Front and Top loading styles, look through the infor-
mation in the following pages and contact us if you need more information.
Please note: For extensive 1280°C/stoneware use, we can supply K6 as 240V/25amp, for extended operating life of elements, requires direct wiring or 30amp plug top and lead (not supplied).
SMALL
NOTE On the chart below:-
FL = FRONT LOADING
TL = TOP LOADING
1100-K = Top temp 1100ºc thermocouple type
“K”
1300-R = Top temp 1300ºc thermocouple type
“R”
Specifications subject to change without notification
Price for kiln only FL=Front Loading, TL= Top Loading