CATALOGUE 2008/2009
CATALOGUE2008/2009
Founded in 1947, knew from the beginning, how to innovate in the sanitary market. From the early days it was obvious that it was at stake in the useof water, so concentrated on developing technical solutions which respect this vital resource.
Now as a major player in the sanitary equipment market, is continuallystriving to improve the viability, the efficiency and the design of its products.
Toilet seats, cisterns, mechanisms, inlet valves, WC connectors, mounting frames,cladding solution, maintenance system and odour extractor: designs,manufactures and distributes a large range of products and systems for toiletequipment.
Thanks to its partnership with O.E.M. and with hundreds of distributors, is in constant touch with this ever-evolving market.
Detecting new requirements of the to-day consumer, concerned by sustainabledevelopment issues, is therefore the source of many international patended innovations.
Apart from its factory in Monaco,is present in Eastern
Europe and South East Asia withits subsidiaries in Turkey (Istanbul)and Vietnam (Ho Chi Minh city)
, the constantly evolving specialist
Catalogue 2008/2009 | 3
Sanitary expertise and consideration for waterVia this commitment, underlines the two major areas of our research and development :
• Efficient equipment which guarantees hygiene and comfort
• Responsible water management
The seal of innovation in the WC worldSIAMP TECH is specially dedicated to SIAMP products which use never seen before technicalinnovations.
This stamp on a product is a performance guarantee and also a promise to respect the environment.
Any product or sanitary equipment with the SIAMP Tech seal must live up to 7 criteria :
Patented technological innovation
Significant improvement in the comfort of use
Controlled impact on the environment
Quality compliant with the standards and rules in force
Performance tested and approved by independent external consultants
Easy to install
Simple maintenance
QUALITY AND STANDARDS CONTENTS
4 | Catalogue 2008/2009 Catalogue 2008/2009 | 5
6 26 38 58
12-13 Spinair WC
14-17 VERSO 350
18-19 VERSO 800
20-21 Finishing furniture
22-23 WC Packs
24-25 Other frames
30-31 Concealed
32-33 Close coupled
34-35 Low-level
36-37 High-level
42-47 Mechanisms
48-51 Inlet valves
52-53 Multicare WC®
54-57 WC Connectors
60-63 Thermoset
64-65 Polypropylene
66-67 MDF
These standards certify that the manufacturing process guarantees a constant level of quality, and certify the performanceof the product.
For Example, the NF standard (French Standard) :
According to the principle of ISO 9001 version 2000, ’s approach to quality is present at every stage of design,manufacture and distribution of its products.This quality is recognised and certified by approvals of French and International standards.
SANITARY COMPONENTS
A mark certifying:• conformity with the NF076 certification regulation• announced characteristics thanks to constant
checking by AFNOR
Certified characteristics:
For the mechanisms: Trouble-free operation• flow• tightness
Mechanical properties• endurance (200,000 cycles)• control force
For the float valves:Trouble-free operation• flow for fast filling• sound level during filling• anti-siphon effects• pressure hold
Mechanical properties• endurance (200,000 cycles)• bending resistance
SANITARY EQUIPMENT
A mark certifying:• conformity with the NF017 certification regulation• announced characteristics thanks to constant
checking by AFNOR
Certified characteristics:
The material:• the resistance to cleaning products reserved for
the purpose
• resistance to contact of non-prohibited chemicals• resistance to corrosion (frame)• the required solidity
The dimensions:• allowing connection to supply and drain taps• allowing replacement
Trouble-free operation:• NF certified taps• NF certified mechanisms
TOILET SEATS
A mark certifying:• conformity with the NF240 certification regulation• announced characteristics thanks to constant
checking by AFNOR
Certified characteristics :Aptitude for use
• adaptability• hygiene • stability
Solidity• mechanical endurance
(30,000 opening/closing cycles)• static loads (150 kg)• dynamic loads (30,000 falls of 75 kg load)
DIN TIN WATERMARK SASO
Toile
t sea
ts
Tech
nica
l eq
uipm
ents
Cis
tern
s
Mou
ntin
g fra
mes
The advantages of the mounting frames…
Unlike certain preconceptions, a wall-hung bowl can be installed in almost any case.Only very poor quality floor requires specific installation, although it is not totally impossible
The overall dimensions of the frame + bowl are no larger than aconventional toilet and may even generate a gain in space if theframe is incorporated into the wall.
Installing a wall-hung bowl means choosing an installation that is…
…better lookingoffering a real possibility of adding to the decorative scheme ofthe toilet
…more hygienicThe concealed cistern and wall-hung bowl eliminate hidden corners, simplify cleaning and are in favor of perfect hygiene..
6 | Catalogue 2008/2009
Mou
ntin
g fra
mes
Where can a wall-hung bowl be installed?
Obviously, a wall-hung bowl is installed in a room dedicated to the function instead of thefloor-standing unit with the adjacent semi-low or high placed cistern.
A wall-hung bowl can also be installed in a bathroom. Some solutions even allow adedicated specific space to be created in this room.
For a second toilet, allows toilets to be installed in the “lost areas” as in under theeaves or a staircase, as long as a water supply is possible, with a 100 mm diameter drain orat least a 32 mm diameter drain with a “sani-broyeur”.
What needs to be known before choosing models?
➀ The type of floor :
In a new building, the information is simple: either the support frame is placed on a concrete screed or on a known typeof finished floor: general tiled.
For renovation, if the information is not available, it will either by necessary to sound out the floor by drilling into a loca-tion that can subsequently be concealed.
➁ The type of wall in front of which the frame will be installed:
There are two possible cases:
• Bearing wall: a bearing wall or partition is of concrete, plaster blocks, stones, plastered tiles or any othermaterial at least 100 mm thick.
• Light partition: a light partition is a partition made of hollow bricks, honeycomb plasterboard or solid plaster-board or any other material less than 100 mm thick.
More of the time, simple acoustic sounding will determine the quality of the wall (dull sound = supporting wall, resonantsound = light partition).
The right choice :In all cases, the quality of the floor is important. Ideally, the material should be supporting concrete or another structurewith a capacity of 250 kg per m2. Whenever there is a doubt, it is advisable to call in a professional to find the right so-lution.
PRACTICAL INFORMATIONS
8 | Catalogue 2008/2009 Catalogue 2008/2009 | 9
Supporting Wall :Every type of model (wall, self-supporting or floor), for economic reasons the wall-mounted solution is the one most often adopted.
Light partition : Self-supporting or floor mounted
Technical riser (specific to community housing):Floor model whatever the separation material within the limit of 100 mm thickness, in the standardversion and up to 250 mm with specific accessories.
Glossary :
• Wall Model: Frame attached both to floor and wall
• Self-supporting Model (Universal): Frame attached only to the floor with or without the possibility of connection to the wall.
• Floor Model: specific design, totally self-contained and suitable for installation at amore less great distance from the wall (in particular to handle rooms that are notsquare or the passage of a drain column, or even when there is no partition).
Installation :
The operation is simple and requires no heavy tooling:
• a tape measure and a pencil• a spirit level• an electric drill with drill bits 10 mm max. in diameter• open-end wrenches, maximum size 19 mm• a hammer• a hacksaw• a file
Can be done in less than 3 hours.
Cladding :
The installer is given the greatest freedom in terms of cladding. There are only two necessary constraints:• the thickness of the cladding (from 16 to 100 mm)• the mandatory securing of the cladding to the frame structure
Mou
ntin
g fra
mes
MaintenanceDepending on the hardness of the network water, it may be necessary to clean
or change the joints and membrane of the cistern equipment. The control plate serves as an access trapdoor and the cistern equipment is
directly accessible and easy to take out of the tank.
Extra tools
Installation freedom…
Thanks to its width of 35cm, the VERSO range gives you real freedom to decorate the WC closet, by adding storage cabinets on each side of the toilet, for example.
The VERSO 800 version (80cm high) enables you to envisage installing a toilet in the attic, under the stairs, under a window, etc.
The VERSO range also comprises wash-basin, bidet and toilet bowl structures.
The fully autonomous design of the floor fixed versions enables you to install the frame by itself, the double structure allows for finishing of the toilet on both sides.
The range is complete with ready-to-tile decorative panels as well as bathroom storage and decorative furniture.
Ease and Safety …Steel structure
Frame and feet tested to 400Kg, anti-corrosion treated, they combine robustness, safety and a long service life.
Insulated cisternMade of shock resistant Polystyrene (highly resistant to thermal variations and ageing) it has a max capacity of 6 litres.It is insulated inside (PSE single block shell) to prevent any condensation and improve the phonic insulation of the unit(silent).
EquipmentThis is comprised of a double volume mechanism and silent valve, both of which come from the standard
range (several million already sold). These products are NF approved and still undergo regular testsof 200 000 manipulations. They have been chosen by the worlds largest ceramics manufacturers for their own
equipment.
Secure supplyThe water arrives directly into the cistern thus avoiding the risk of any leaks outside the tank. Water can be suppliedvia any type of pipe or tube (copper, XLPE, PVC, flexitube etc) as the stop gap is equipped with a bicone.
Easy to assembleRobust and simple fixations
Adjustment by setscrew (safe and precise)
Simple clip-on evacuation drain.
PRODUCTS INFORMATIONSVERSO
10 | Catalogue 2008/2009 Catalogue 2008/2009 | 11
PA 2050 B : Extensible pipe for thetoilet frame which enables you tocompensate for the evacuation holeexcentricity.
Fixing screws for activating thelengthened control plate for thick finishings (up to 250mm)
Lengthened supply tube: specialhandicaped bowl
Extensions for bowl fixationrods: allows you to replace the bowlwith another of a different size.
BC... 350p. 14-17
BC... 800p. 18-19
SC... 350p. 24-25
BL... 1100p. 24-25
BB... 1100p. 24-25
BB... 800p. 24-25
Fram
e ty
pe
WC ✓ ✓
Bowl ✓
Wash basin ✓
Bidet ✓ ✓
Con
trol
typ
e
Front ✓
Top ✓
Side ✓
Oth
er
SPINAIR WC® OptionIntegrated odour extractor
✓
Decoractive furnitureOption
p. 20-21 p. 20-21
Pack WCOption
p. 22-23 p. 22-23
Mou
ntin
g fra
mes
BUILT-IN ODOUR EXTRACTOR
12 | Catalogue 2008/2009 Catalogue 2008/2009 | 13
Mou
ntin
g fra
mes
The ConceptThe idea behind the SPINAIR WC® built-in odour extractor is quite simple, by connecting the toilet bowl directly to the building’s mechanised ventilation shaft or to any autonomous ventilation system already existing in a standardised building.Any odours generated by the user are directed towards the outside of the building, without crossing the room, and are directly extracted at the aperture of the ventilation shaft.
How it works The extraction from the toilet bowl is done via the bracewhich is in constant contact with the overflow of the flushing mechanism.To be 100% efficient, this contact must be completely air-tight so that no extraction volume is lost (extraction intothe tank). To achieve this, the SPINAIR WC® (trade mark)system uses an upturned bell-jar immersed in the water,which ensures the airtightness. The bell-jar does not inter-fere with the overflow function.The bell-jar is then connected by a flexible tube to a sleevewhich crosses the tank and which ensures connection tothe mechanised ventilation shaft
Strong points• Quick to install :
By simple connection to the mechanised ventilation shaft
• Absolute minimal energy consumption :The extraction by the Ventilation column is automatically shared between the existing extractor outlet and the toilet bowl,without imbalance (tested and approved on site*). The efficiency of the SPINAIR WC® system only requires a minimumof 2m3/hour of extraction in the bowl.
* Show buildings : Hotel Novotel Bordeaux Meriadec (48 rooms equipped), Hotel Mercure Strasbourg (63 rooms equipped)Average extraction recorded in the bowl 3m3/hour and at the extractor outlet 35 m3/hour. (Readings taken with a hotwire anemometer and k 35 cone)
• Silent :It is the mechanised ventilation shaft which is active
• No maintenance :No motor, no filter to change
• Self-cleaning : The small volume of air sucked into the bowl virtually excludes any risk of undesirable particles being sucked up, moreover because they system is washed out after every flush (the water uses the air circuit backwards).
• Environmentally friendly : No disposable rubbish (used filter, battery or fuel), no extra energy output, avoids the need for deodorant sprays etc.
SPINAIR WC® is a product.
ResultIn collective buildings, public rest rooms and at home, healthy and odour-free toilets support
Installation
Collective ventilation shaft
Individual ventilation shaft
The rangeThe SPINAIR WC® range can also equip
the full range of WC VERSO 350 framesFr
ont s
ide
Back
sid
e
Drill a hole in the VentilationColumn (Ø) 32 mm
Cut the flexible tube (jointbetween the extractoroutlet and the ventilatormotor)
The connection between the frame and thequick-fit hose or T joint can be done with anytube with Ø 32mm (PVC, flexitube…) If thereare fire safety requirements there is a galvaflexanti-fire tube in the SPINAIR WC® range.
Screw in the T joint Use sticky tape to seal
Connect to cistern
Attach the quick-fit hose(sealing is ensured by afoam joint)
Connect the hose to theframe
Float valve
Mechanism
Supply bend
Supply sleeve
Setscrew (x 4)
Attaching screw (x 6)
Adjustable feet (x 2)
1/4-turn spherical stopcock
PSE template (protectionwhen applying the finishings)
Supply bend plug(protection when applying the finishings)
WC pipe plug (protectionwhen applying the finishings)
Bowl fixation kit
Flexible sleeve (x 2)(protects the bowl)
Bowl fixation strip (x 2)
Pipe fixing bracket
Wall fixing lug
Float valve
Mechanism
Supply bend
Attaching screw (x 6)
Adjustable feet (x 2)
Bowl fixation strip(x 2)
Setscrew (x 4)
1/4-turn spherical stopcock
PSE template (protectionwhen applying the finishings)
Supply bend plug(protection when applyingthe finishings)
WC pipe plug (protectionwhen applying the finishings)
Supply sleeve
Bowl fixation kit
Flexible sleeve (x 2)(protects the bowl)
Pipe fixing bracket
Float valve
Mechanism
Supply bend
Strip fixingbracket
Plugs (x 8)
Attaching screw (x 8)
Adjustable feet (x 2)
Bowl fixation strip
Flexible sleeve (x 2)(protects the bowl)
Setscrew (x 2)
1/4-turn spherical stopcock
PSE template (protection when applying the finishings)
Supply bend plug (protectionwhen applying the finishings)
WC pipe plug (protection whenapplying the finishings)
Supply sleeve
Pipe fixing bracket
Bowl fixation kit
Description Dimensions
Catalogue 2008/2009 | 15
BATI-WC VERSO 350
14 | Catalogue 2008/2009
180 or 230
180 or 230
180 or 230
A speciality, the double structure allows installation in any sort of configuration anddue to its independent fixation (no need for it to back onto a wall or partition) offers the possibility of creating a toilet area in the bathroom which can be used as a framework for ahalf-partition.
• Double structure made of steel tubes 30 x 30 x 1.5mm, joined by electro-weld andanti-corrosion treated, epoxy paint guaranteed 25 years (withstands 600 hours insaline mist)
• The feet are made of a bichromate treated steel plate (80 x 100 x 8 mm) and twotubes of electro-welded, bichromate treated steel (25 x 25 x 3 mm)
• Fixing to the floor with 6 bichromate metal plugs.
• Also available in the SPINAIR WC® version.
The design of the structure enables you to have, with the same product, a self supporting orwall mounted frame, which can be installed whatever the configuration of the closet, (supportingwall or light partition, supporting floor or not).
• Steel tube structure, 45 x 45 x 1.5mm, joined by electro-weld and anti-corrosiontreated, epoxy paint guaranteed 25 years (withstands 600 hours in saline mist)
• The feet are made of a bichromate treated steel plate (40 x 80 x 8 mm) and twotubes (electro-welded bichromate treated steel, 40 x 40 x 4 mm)
• Fixing to the floor with 6 bichromate metal plugs.• Can be joined to the wall by two fixing strips, held in place by two plugs and
bichromate long bolts.
• Also available in the SPINAIR WC® version.
Designed to be fixed to the wall and joined to the floor, this version is intended for a closet witha supporting wall.
• Steel tube structure, 30 x 30 x 1.5mm joined by electro-weld and anti-corrosion treated, epoxy paint guaranteed 25 years (withstands 600 hours in saline mist)
• The feet are made of a bichromate treated steel plate (100 x 30 x 8mm and two tubesof electro-welded, bichromate treated steel (25 x 25 x 3mm)
• Fixing to the wall and the floor by plugs and bichromate long bolts
• Also available in the SPINAIR WC® version.
floor mounted version
wall mounted version
| DIN | TIN |
| DIN | TIN |
| DIN | TIN | Wall fixing lug
142to 245
Mou
ntin
g fra
mes
BCS 350
BCU 350universal version
BCM 350
1100
to
1300
325
to 5
25
1100
to
1300
325
to 5
25
1100
to
1300
325
to 5
25
(min 147 for bent pipes)
(min 147 for bent pipes)
142to 245
Description DimensionsCONTROL PLATES FOR VERSO 350
16 | Catalogue 2008/2009
Made of ABS, these dual flush control plates are availablewith three types of finish :
• White• Bright chrome-plated
(casing and large button bright chrome-platedand small button painted, mat chrome look)
• Mat chrome (casing and large button painted, mat chromelook and small button bright chrome-plated)
For quick and easy installation, the fixing and activatingscrews can be manually cut to length to adjust their lengthto the dimensions of the finishing.
Made of Zamac, the dual flush SMART control plate is available with two types of finish:• Bright chrome-plated • Mat chrome
And in two versions : • Standard, for use in individual homes• Untamperable, for use in public or collective places
(untamperability is ensured by a headless screw M4 x 12)
Made of ABS the single flush control plate is available with two types of finish:
• White• Mat chrome (painted)
Made of brushed stainless steel, this is an untamperable control plate designed for use in pu-blic or collective places (untamperability is ensured by two stainless steel screws torx 4-2 x19).
SMAR
TME
DIALEM
ON
MOON
YIN YA
NG
MV
MV IN
OXABS casing
Zamac frame
Zamac largevolume control
Zamac small volume control
Large volume control
Small volume control
Polyamide fixing and activation screw
ABS casing
Polyamide fixingand activationscrew
ABS casing
ABS frame
Control panel
Polyamide fixingand activationscrew
ABS casing
Stainless steel frame
Stainless steelcontrol panel
Untamperable screw
200
200 21,7
9
181
200 11
8,1
180
17
24
184
Catalogue 2008/2009 | 17
ABS frame
Polyamide fixingand activationscrew
Mou
ntin
g fra
mes
Dual Flush ABS
Dual Flush Zamac
Single Flush ABS
Untamperable Single Flush
Description Dimensions
Catalogue 2008/2009 | 19
BATI-WC VERSO 800
floor mounted version
18 | Catalogue 2008/2009
PSE template (protection when
applying the finishings)
Mechanism
Supply bend
Bowl fixation strip (x 2)
Pipe fixing bracket
Metal plugs (x 6)
Adjustable feet (x 2)
Setscrew (x 4)
Designed to be fixed to the wall and joined to the floor, this version is intended for a closet witha supporting wall.
• Steel tube structure, 30 x 30 x 1.5mm joined by electro-weld and anti-corrosiontreated, epoxy paint guaranteed 25 years (withstands 600 hours in saline mist)
• The feet are made of a bichromate treated steel plate (100 x 30 x 8mm) and twotubes of electro-welded, bichromate treated steel (25 x 25 x 3mm)
• Fixing to the wall and the floor by plugs and bichromate long bolts
Float valve
Mechanism
Supply sleeve
Bowl fixing kit
Supply bend plug (protection when
applying the finishings)
WC pipe plug (protection when applying the finishings)
Flexible sleeve (x 2)(bowl protection)
single flush pneumatic control
dual flush control plate
available with 3 types of finish :
WhiteBright Chrome-plated
Mat Chrome
dual flush control plate
available with 3 types of finish :
WhiteBright Chrome-plated
Mat Chrome
cable operated dual flush control
| DIN | TIN |
| DIN | TIN | BCS 800floor mounted version
BCS 800 Fire Safety
BCM 800wall mounted version
180
Mou
ntin
g fra
mes
A speciality, the double structure allows installation in any sort of configuration anddue to its independent fixation (no need for it to back onto a wall or partition) offers the possibility of creating a toilet area in the bathroom which can be used as a framework for ahalf-partition.
• Double structure made of steel tubes 30 x 30 x 1.5mm, joined by electro-weld andanti-corrosion treated, epoxy paint guaranteed 25 years (withstands 600 hours insaline mist)
• The feet are made of a bichromate treated steel plate (180 x 100 x 8 mm) and twotubes of electro-welded, bichromate treated steel (25 x 25 x 3 mm)
• Fixing to the floor with 6 bichromate metal plugs
Having the same structure as BCS 800, this product is intended for installation intechnical riser columns which must comply with anti-fire standards (drilling the fireproof partition at < Ø 75mm), and the conduit (evacuation and supply pipe) at <Ø 125mm, class M1).
Available in versions: Single flush:
• BCS 800 PN, pneumatic controls with either a white or bright chrome-plated button or with an untamperable stainless steel panel
Dual Flush:• BCS 800 CA, cable operated, with a through button of either 70mm
maximum, (CA70) or 150mm maximum (CA150)
1/4-turn spherical stopcock
Float valve
Supply sleeve
Bowl fixing kit
Supply bend plug (protection when applying the finishings)
WC pipe plug (protection when applying the finishings)
Flexible sleeve (x 2) (bowl protection)
800
to 1
000
325
to 5
25
800
to 1
000
325
to 5
25
800
to 1
000
325
to 5
25
1/4-turn spherical stopcock
Supply bend
Bowl fixation strip (x 2)
Pipe fixing bracket
Setscrew (x 4)
Metal plugs (x 6)
Adjustable feet (x 2)
PSE template (protection when
applying the finishings)
Wall fixing lug
Float valve
Supply bend
Fixing bracket for thebowl fixing strips (x 2)
Plugs (x 8)
Bowl fixation strips (x 2)
Pipe fixing bracket
Setscrew (x 8)
Attaching screw (x 6)
Adjustable feet (x 6)
1/4-turn spherical stopcock
Mechanism
Bowl fixing kit
Supply bend plug (protection when applying the finishings)
WC pipe plug (protection when applying the finishings)
Supply sleeve
Flexible sleeve (x 2) (bowl protection
180 or 230
180 or 230
180 or 230
180 to 245
FINISHING FURNITURE
Version for Bati VERSO 800 with flush control on the top
Can be fitted in any space from 80 cm to 100 cm wide bysimply cutting the runners and the shelf to size.
It is also height adjustable (adjusted to the frame height of80 to 85 cm) and width adjustable (adjustable to the widthof the frame, from 21 to 24.5 cm)
Description Dimensions
20 | Catalogue 2008/2009 Catalogue 2008/2009 | 21
1 2 3
5 64 Choice of shelf finishings
1. Traditional Light Wood2. Traditional Dark Wood3. Trendy Light Wood4. Trendy Dark Wood5. Plain White
Assemble the furniture Lay the furniture on the frame Adjust runners & skirting board
Adjust the shelf Put the doors into place Install the control plate & bowl
sold as a complete unit or in 2 parts (base + shelf)
Option with built-in wash basin
and automatic time delayed tap
hole cut for control panel
hole cut for connections
hole cut for control panel
hole cut for connections
shelf
runner
door
skirtingboard
Time delayed taph = 265mm
basin Ø 270mm
runner
door
skirting board
cabinet
basin evacuation
cabinet
White complete MEUBLEO
MEUBLEO can be fitted in any space from 79 to 100 cm wide by simply cutting the runnersand the shelf to size. It can also be height adjusted (adjusted to the frame height from 110 to122 cm) and width adjusted (adjustable to the frame width of 21 to 24.5 cm).
• Shelf : pre-formed melamine, 22mm, white
• Pre-cut front panel : MDF coated PVC, white, 19mm
• Doors : MDF coated PVC, white, 19mm
• Chrome handles
• Cabinets : white melamine, 16mm
• Runners : white melamine, 16mm, delivered with decorative beading
• Skirting board : white melamine, 19mm, delivered with decorative beading
Mou
ntin
g fra
mes
MEUBLEO 350
MEUBLEO 800
Catalogue 2008/2009 | 23
• Full WC VERSO BCU 350 unit
• Lotus suspended bowl
• Opio toilet seat
22 | Catalogue 2008/2009
COMPLETE SOLUTIONS
• Full WC VERSO BCU 350 unit
• Olya semi-fared suspended bowl
• Olya toilet seat
• Full WC VERSO BCS 800 unit
• Lotus suspended bowl
• Opio toilet seat
Universal
Kyriel
Eureka
• One Universal PACK WC
• One MEUBLEO 350, white
Duo
• One PACK WC Eureka
• One MEUBLEO 800, white
• One wash basin with taps
Trio
Description Dimensions
210to 245
147to 245
• VERSO BCU 350 toilet frame, floor mounted with possible wall joint, front flush control, delivered complete with Yin-Yang white dual flush control plateand evacuation kit.
• Lotus white suspended toilet bowl
• OPIO white polypropylene toilet seat with stainlesssteel top fixing hinges.
• VERSO BCU 350 toilet frame, floor mounted with possible wall joint, front flush control, delivered complete with Yin-Yang white dual flush control plateand evacuation kit.
• OLYA white semi-fared suspended toilet bowl
• OLYA white Thermodur toilet seat with stainless steeltop fixing hinges
• VERSO BCS 800 toilet frame, floor mounted only, topflush control, delivered complete with white dual flushcontrol plate and evacuation kit
• Lotus white suspended toilet bowl
• OPIO white polypropylene toilet seat with stainlesssteel top fixing hinges
• VERSO BCU 350 toilet frame, floor mounted with possible wall joint, front flush control, delivered complete with white Yin-Yang dual flush control plateand evacuation kit.
• Lotus white suspended toilet bowl• OPIO white polypropylene toilet seat with stainless
steel top fixing hinges• MEUBLEO 350, white
• VERSO BCS 800 toilet frame, floor mounted only, topflush control, delivered complete with white dual flushcontrol plate and evacuation kit
• Lotus white suspended toilet bowl • White OPIO polypropylene toilet seat with stainless
steel top fixing hinges• MEUBLEO 800, white• Complete acrylic wash basin unit Ø 270mm to be
installed, (chrome time delayed tap with tubing and Tjoint water supply, evacuation with flexible tube connection to the WC pipe.
520
355
520
355
540
2050
50
360
520
355
520
355
210mmminifrom wall
180
5050
Mou
ntin
g fra
mes
Pack WC
Complete Pack WC
147to 245
1100
to
1300
325
to 5
25
1100
to
1300
325
to 5
25
800
to 1
300
325
to 5
25
1100
to
1300
325
to 5
25
800
to 1
300
325
to 5
25
• Steel tube structure, 30 x 30 x 1.5mm, joined by electro-weld and anti-corrosiontreated, epoxy paint guaranteed 25 years (withstands 600 hours in saline mist)
• Feet comprising of a steel bichromate plate (100 x 30 x 8mm) and two electro-welded steel bichromate tubes (40 x 40 x 4mm)
• Fixing to the wall and the floor by plugs and bichromate long bolts
• Steel tube structure, 30 x 30 x 1.5mm, joined by electro-weld and anti-corrosiontreated, epoxy paint guaranteed 25 years (withstands 600 hours in saline mist)
• Feet comprising of a steel bichromate plate (100 x 30 x 8mm) and two electro-welded steel bichromate tubes (40 x 40 x 4mm)
• Fixation to the floor by 6 bichromate metal plugs and long bolts
• Double steel tube structure, 30 x 30 x 1.5mm, joined by electro-weld and anti-corrosion treated, epoxy paint guaranteed 25 years (withstands 600 hours in salinemist)
• Feet comprising of a steel bichromate plate (100 x 100 x 8mm) and two electro-welded steel bichromate tubes (25 x 25 x 3mm)
• Fixing to the wall and the floor by plugs and bichromate long bolts.
Description Dimensions
24 | Catalogue 2008/2009 Catalogue 2008/2009 | 25
OTHER FRAME TYPES
BBS 1100
BLM 1100
SCU 350
BBS 800
BBM 1100
BBM 800
Bidet fixation strip (x2)
Sleeve fixation bracket
Setscrew (x4)
Wall fixing lug
Fixation strip for the bidet rods
Sleeve fixation bracket
Drainage tube Setscrew
BBS 1100
BBM 1100
Feet
Long bolts (x 6)
Connection fixation plates
Bowl fixing strip (x 2)
Flexible sleeve (x 2)(bowl protection)
Bowl fixation kit
Basin fixation kit
Sleeve fixation bracket
Setscrew (x2)
floor mounted version
wall mounted version
1080
to
1280
400 80 to 245
804
to 1
004
780
to 9
80
1080
to
1280
400180
325
to 5
2532
5 to
525
1080
to
1280
80to 245400
800
to 1
000
400180
325
to 5
2532
5 to
525
800
to 1
000
80to 245400
BBS 1100 BBS 800
BBM 1100 BBM 800
Mou
ntin
g fra
mes
Bidet frame
Wash-basin frame
Toilet bowl frame Universal support for suspended toilet bowl,water supply either by built-in cistern or by pressure.
• Steel tube structure, 45 x 45 x 1.5mm, joined by electro-weld and anti-corrosion treated, epoxy paint guaranteed 25 years (withstands 600 hours in saline mist)
• Feet comprising of a steel bichromate plate (140 x 80 x 8mm) and two tubes (electro-welded, bichromate treated steel, 40 x 40 x 4mm)
• Fixing to the floor by 6 bichromate metal plugs
325
to 5
25
Wall fixing lug
Basin fixation flange (x2)
Supply/drainage support
Water supply teat (x2)
Drainage tube
Adjustable feet (x2)
Flexible sleeve (x2)(bowl protection)
Bidet fixation kit
Water supply/drainage support
Adjustable feet (x2)
Water supply teat (x2)
Bidet fixation rods (x2)
Flexible sleeve (x2)(bowl protection)
Bidet fixation kitSupply/drainage support
Adjustable feet (x2)
Water supply teat (x2)
Complete…
• High-level cisterns:Intended for the replacement of cast iron old cisterns, the range comprises an inexpensive model ( PRIMO ) activated by a hanging chain and a “comfort”model ( RONDO ) activated by a chain or pneumatically, with insulation and asilent floater valve.
• Low-level cisterns:Intended for specific installations, the range comprises an inexpensive model ( PRIMO ), an extra flat model ( EXTRAPLAT 68 ) and a corner model( ANGLE 78 ). An adapter kit enables other models of the range ( RONDO,SCALA ) to be installed in the low-level position.
• Close coupled cisterns:Meeting the basic requirements of the market, there are two models :RONDO and SCALA, “comfort” models with insulation, silent valve andwater saver mechanism.
• Concealed cisterns:Designed for built-in installations for suspended toilet bowls, floor mounted, walledin or plumbed in to the rising column, the range comprises two models :INTEGRA with flush control plate (as per WC frame) and INTRA with wireoperated push button.
Universal…
Close coupled cisterns are equipped with fixations which enable installation on any type of toilet bowl.
A universal water supply kit (optional extra) enables many problems to be overcome :Bottom, side or back water supply inlet.
Made of recyclable synthetic materials which combine robustness andshine, the range of cisterns is both complete and universal :
26 | Catalogue 2008/2009
Cis
tern
s
PRODUCT INFORMATION OPTIONAL EXTRAS
28 | Catalogue 2008/2009 Catalogue 2008/2009 | 29
Universal fixation
Universal water supply kit
Comfort range equipment Water saving mechanism and silent inlet valve
Economic range equipment
Single flush mechanism and standard inlet valve
INTEGRA DF INTEGRA SFINTRA
Floor bowlSide inlet
INTRA Floor bowl
Bottom inlet
INTRA Susp. bowlSide inlet
INTRA Susp. bowl
Bottom inletSCALA DF RONDO DF RONDO MV RONDO H RONDO Hpa RONDO Hpe PRIMO 58 PRIMO 28 PRIMO 08 EXTRAPLAT 68 ANGLE 78
Equi
pmen
t
DF mechanism ✓ ✓ ✓ ✓ ✓ ✓ ✓Interruptible mechanism ✓ ✓ ✓
SF mechanism ✓ ✓ ✓ ✓ ✓ ✓ ✓
Silent valve ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
Traditional valve ✓ ✓ ✓
Type
of
wat
er s
uppl
y Side ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
Bottom ✓ ✓
Universal with kit with kit with kit
Oth
er
Insulated tank ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓Adjustable fixation ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓Delivered complete ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ without
down tubewithout
down tubewithout
down tube ✓ ✓ without down tube ✓ ✓
Pneumaticcontrol ✓ ✓
Dim
ensi
ons
Width in mm 492 492 460 460 460 460 430 430 430 430 430 430 430 430 430 435 310
Height in mm 516 516 332(excluding plug)
332(excluding plug)
332(excluding plug)
332(excluding plug) 380 410 410 380 380 380 380 380 380 370 300
Depth in mm 139 139 127 127 127 127 150 150 150 150 150 150 150 150 150 115 90
Bowl inter axisaccepted 125 to 335 125 to 335 125 to 335 125 to 335
Wall fixationinter axis 220 220 220 220 220 220 220 220 220 310 to 350
Drainage diameter 32 32 32 50 32 50 50
Low-level adapter kitEnables a close coupled cistern to be installed at low-level position Universal supply kit
Enables all types of supplyfor close coupled or low-level cisterns
Straight down tube with sprayFor Turkish toilets with high-level cistern
Elbow down tube with rubber cone
For English type WC with high-level cistern
Cis
tern
s
• “Comfort” range
• Available in Single or Dual flush version
• Delivered complete with insulation, white control plate, fixing brackets, supply sleeve,stopcock, seals, screws and net for building in.
• Max Capacity : 9 litres
• “Comfort” range
• Available for wall-hung or floor mounted bowls
• Bottom or side inlet
• Control by top or side cable (reversible lid)
• Delivered complete with insulation, chrome plated double flush control button,Ø 50mm, fixation brackets, 1/4-turn spherical stopcock, seals and screws.
• Max capacity: 6 litres
Description Dimensions
INTEGRA
30 | Catalogue 2008/2009 Catalogue 2008/2009 | 31
CONCEALED CISTERNS
Cistern, max capacity 9 litres (water level adjustable). Watertightness is individually tested in the factory
Silent inlet valve (1st category, - 20 dB)
Connection to the water supply is via a T square 3/8 stop tap and copper tube 8 x 10. As the connection is made inside the cistern, there is no risk of a leak.
Insulation : outer casing made ofexpanded polyethylene
492
139 75
516
16 to 80
194
80
Bowl seal
Bend pipe
PSE insulation casing
Mechanism(Dual flush, small
adjustable cistern, cable operated)
Water supply hose
Supply pipe
Dual flush mechanism
Reversible lid(for front or top controls)
Fixation strip
Silent inlet valve (1st category, - 20 dB)
PSE insulation casing
Reversible lid (for front or top controls)
Fixation strip
Silent inlet valveside water supply inlet, (water level adjustable)
Bend seal
Bend nut127
332
460
127
332
460for suspended toilet bowls…side inlet bottom inlet
for suspended toilet bowls
for floor mounted toilet bowlsfor floor mounted toilet bowls…side inlet bottom inlet
Dual flush mechanism
HDPE supply pipe withdouble O-ring joint on thecistern side and gasket onthe side of the watersupply hose.
Fixation bracket(braces supplied)
Cis
tern
s
INTRA
Description Dimensions
Catalogue 2008/2009 | 33
• “Comfort range”
• Ceramic look
• Universal fixation
• Dual flush push button
• Delivered complete with insulation, seals and fixing screws
• Max capacity: 9 litres
• “Comfort range”
• Ceramic look
• Universal fixations
• Stop or dual flush side button
• Delivered complete with insulation, seals and fixation screws
• Max capacity: 9 litres
• Economic range
• Universal fixations
• Single flush side button
• Delivered complete with seals and fixation screws
• Max capacity: 9 litres
SCALA
32 | Catalogue 2008/2009
CLOSE COUPLED CISTERNS
410
15053
66 to 90
430
320
125 to 235
430
320
125 to 235
380
15053
66 to 90
430
125 to 235
66 to 90
53
380
320
150
Lid
Insulation
Cisternshell
Internal fittings
Fixation screws
Insulation
Cisternshell
Fixation screws
Cisternshell
Fixation screws
Lid
Lid
Cis
tern
s
RONDO
PRIMO 58 Internal fittings
Internal fittings
Description Dimensions
• “Comfort” range
• Low-level mounted
• Extra flat (115mm)
• Interruptible Single flush control on side button
• Delivered complete with insulation, elbow pipe connection, seals and fixation bracket
• Max capacity: 9 litres
• “Comfort” range
• Low-level corner mounted
• Interruptible Single flush control on side panel
• Delivered complete with insulation, elbow pipe connection, seals and fixation bracket
• Max capacity: 9 litres
• Economic range
• Low-level mounted
• Single flush control on side panel
• Delivered complete with insulation, elbow pipe connection, seals and fixation bracket
• Max capacity: 9 litres
34 | Catalogue 2008/2009
LOW-LEVEL CISTERNS
435
330 ± 20
420
à 6
20
370
Ø 12/17 115
180 ± 5
310
300
90
310
125 to 240
560
to 6
60
15053
430
380
620
to 7
20
550
to 6
50
220
Cistern lid
Insulated cistern shell
Pipe with seal
Cistern lid
Insulated cistern shell
Pipe with seal
Pipe
Seal
Internal fittings
Fixation screws
Cistern lid
Cistern shell
Catalogue 2008/2009 | 35
Cis
tern
s
EXTRAPLAT 68
PRIMO 28
ANGLE 78
Description Dimensions
• “Comfrot” range
• High-level mounted
• Side chain pull single flush
• Delivered complete with seal and fixation bracket but not the descent pipe
• Max capacity: 9 litres
• “Comfort” range
• High-level mounted
• Single pneumatic flush control, visible or sunk in
• Delivered complete with seal and fixation bracket but not the descent pipe
• Max capacity: 9 litres
• Economic range
• High-level mounted
• Side chain pull single flush
• Delivered complete with seal and fixation bracket but not the descent pipe
• Max capacity: 9 litres
36 | Catalogue 2008/2009
HIGH-LEVEL CISTERNS
430
32
400
15053
220
430
32
400
15053220
430
32
400
15053220
Catalogue 2008/2009 | 37
Lid
Insulation
Cistern shell
Seal
Fixation screws
Lever
Lid
Cistern shell
SealFixation screws
Lever
Lid
Insulation
Cistern shell
Seal
Fixation screws
Pneumaticpush button
Cis
tern
s
RONDO H
RONDO Hppneumatic control
PRIMO 08
Internal fittings
Internal fittings
Internal fittings
38 | Catalogue 2008/2009
Chosen by many worldwide O.E.M., the range of mechanisms and inletvalves ensures quality and robustness, guaranteed by NF (French Standards) and many international certifications.
Manufactured from noble, recyclable materials, these products are regularly tested, even individually tested for NF certified inlet valves, to ensure long lasting efficient operation, resulting in a 10 year guarantee for the whole range (excluding rubber parts)
Expectations of comfort (silence, easy to use, easy to install) and water saving have motivated to develop concepts which are now the object of many patents.
has developed a complete range of WC connectors to completeits role as a WC manufacturer.
The full range is manufactured from fire resistant PVC (according to the French anti fire Standard M1).
As well as standard models:• Long, straight and elbow pipes• Male and female elbow pipes• Hoses and reducer taps
The range also includes flexible pipes and especially a stretchable pipe which retains shape and offersmany connection possibilities for all sorts of renovation configurations.
The tube diameter for this range is 100mm, and for specific cases, the range includes reducers for Ø 80and Ø 90 and an adapter for Ø 110mm.
NB : the diameters given are for the outer diameter of the PVC tubes :Ex : a 100/90 reducer enables you to join a PVC tube with Ø 100 (non sleeved) to a tube of Ø 90, (non sleeved)
Finally, in order to prolong the life of WC equipment, has inventedan easy, all-in-one maintenance system : MULTICARE WC®
Tech
nica
l equ
ipm
ents
PRACTICALS INFORMATIONS
40 | Catalogue 2008/2009 Catalogue 2008/2009 | 41
OPT
IMA
50
OPT
IMA
49
SKIP
PER
36A
SWIT
CH
22A
SKIL
L 51
STO
RM
33A
CLA
SSIC
42
ASP
43
FR 4
1
IS 4
0
JD 4
4
Type
of c
ontr
ol Dual flush ✓ ✓ ✓Interruptible button ✓Single flush ✓ ✓Lever ✓ ✓ Side
lever ✓ ✓
Ada
ptab
ility
Ø of lid hole (mm) 18 to 50 18 to 50 18 to 50 18 to 50 18 to 50 18 to 50 10 to 42 SpecifPorcher
SpecifIdeal
Standard
SpecifJacob
Delafon
Cistern height (mm) 272to 480
285to 450
293to 468
305to 415
272to 480
305to 415
255to 455
SpecifPorcher
SpecifIdeal
Standard
SpecifJacob
Delafon
Overflow height (mm) 149to 245
155to 245
180to 240
180to 240
180to 240
180to 240
180to 240
SpecifPorcher
SpecifIdeal
Standard
SpecifJacob
Delafon
Stan
dard
s
NF ✓ ✓ ✓ ✓ ✓SASO ✓ ✓ ✓WATERMARK ✓ ✓WRAS ✓ ✓ ✓ ✓
COM
PACT
95L
HA
ND
Y 93
L
STAN
DARD
15E
L
RO
BEC
O 0
6
COM
PACT
99T
COM
PACT
99B
HA
ND
Y 93
T
HA
ND
Y 93
B
BA
S 26
EL
Wat
ersu
pply Side ✓ ✓ ✓ ✓
Bottom ✓ ✓ ✓ ✓ ✓
Type
of
clos
ure Hydraulic ✓ ✓ ✓ ✓
Mechanical ✓ ✓ ✓ ✓ ✓
Type
of
conn
ectio
n
3/8 Brass ✓ ✓ ✓ ✓ ✓ ✓ ✓3/8 Plastic ✓1/2 Brass ✓ ✓1/2 Plastic ✓ ✓ ✓ ✓
Dim
ensi
ons
Max space required(mm) 110 140 case
110case85 90 90 107 107 90
Width (mm) 50 74 41 41 60 60 74 74 60
Height (mm) at the supply axis 250 250 230 to 348 282 230 to 348 287 290
Floater (mm) 80 x 80 Ø 78
Lever length 270 (brass)
295 (alu)
Range of water leveladjustment (mm) 105 75 105 105 75 75 110
Stan
dard
s
NF ✓ ✓DIN ✓KIWA ✓SASO ✓ ✓WATERMARK ✓WRAS ✓ ✓
Cistern lid hole :The whole range has the possibility of diameteroverlap from 10 to 50mm (depending on themodel) and most of them can accept excentricity
Cistern height :Each mechanism has an adjustable height range,which enables installation in most of the cisternsavailable on the market. The overflow can alsobe adjusted
Drainage hole :The strainer which is common to all models inthe range permits the use of a drainage hole of58 to 72mm. The standardisation of the strainerenables you to change the upper part of the mechanism for another without having to takethe cistern apart.
Push buttons :Most of the control buttons in the range are selfadjusting, so do not require cutting to size.
Height adjustment :Just slide the stirrup clamp
Small flush adjustment :Small floater adjustable by notches
Residual water level : Set in the factory, it can be modified for somemodels.
Side inlet :3/8 or 1/2 brass3/8 or 1/2 plastic
Bottom inlet : 3/8 plastic3/8 brass1/2 plastic
Adjustable water height :Using an adjustment screw
Mechanisms Installation : easy adjustment
Inlet valves
Tech
nica
l equ
ipm
ents
Description Dimensions
Catalogue 2008/2009 | 4342 | Catalogue 2008/2009
DUAL FLUSH MECHANISMSPush button :Small button = small flushLarge button = large flush
Button fixing nut
Wire cable : enables side control,(front or side excentricity)
Adjusting stopper for residual water
Valve gasket made of NR/EPDM,ensures perfect watertightness
Strainer gasket, made of mouldedSBS elastomer. Its elasticity andshape reinforce water-tightness atthe bottom of the cistern
Escutcheon :for lid holes from
18 to 50mm
Overflow : precutted and adjustable
every 4mm
Adjustable small flushcursor from 3 to 4.5L
Strainer : made of ABS,ensures a powerful
rinsing flow (2.75L/s)
Bowl gasket,compensates
for any irregularities of the ceramic.
Compatible with : Lid hole (A), diameter from 18 to 50mmDrainage hole (D) diameter from 58 to 72mm
Adjustable height (B) with escutcheon: 272 to 480mm(Lid hole (A) diameter 18 to 37mm and > than 44mm.)Without escutcheon: 287 to 480mm(Lid hole A, diameter 38 to 44mm)
Adjustable overflow height : 149 to 245mm (C)
D
A
B
C
Escutcheon :for lid holes of
18 to 50mm
Stirrup clamp : heightadjustable every 12mm
Adjustable small flushcursor from 3 to 4.5L
Strainer : made of ABS,ensures a powerful
rinsing flow (2.75L/s)
Bowl gasket, compensates
for any irregularities of the ceramic.
Push button :Small button = small flushLarge button = large flush
Button excentricity tolerance = +/- 15mm
Overflow : precutted and adjustable every 4mm
Adjusting stopper for residual water
Valve gasket made of NR/EPDM,ensures perfect watertightness atthe bottom of the cistern
Strainer gasket, made of mouldedSBS elastomer. Its elasticity andshape reinforce water-tightness atthe bottom of the cistern
Inner bottom
of cistern
A
B
C
D
Compatible with : Lid hole (A), diameter from 18 to 50mmDrainage hole (D) diameter from 58 to 72mm
Adjustable height (B)from 285 to 450mm
Adjustable overflow height : 155 to 245mm (C)
Push button :Small button = small flushLarge button = large flush
Overflow : precutted and adjustable every 5mm
Floater, adjusts small flush volumefrom 3 to 4.5L
Valve gasket made of NR/EPDM, ensures perfectwatertightness
Strainer gasket, made of mouldedSBS elastomer. Its elasticity andshape reinforce watertightness at the bottom of the cistern
Escutcheon :for lid holes of
18 to 37mm and 44 to 50mm
Stirrup clamp : tolerates ordinary
excentricity In old cisterns
Strainer : made of ABS, very robust, ensures a
powerful rinsing flow of 2.75L/s
Bowl gasket, compensates for any
irregularities of the ceramic.
Compatible with : Lid hole (A), diameter 18 to 50mmDrainage hole (D) diameter from 58 to 72mm
Adjustable height (B) :from 293 to 447mm (Lid hole (A) diameter 18 to 37mm)from 312 to 468mm(Lid hole A, diameter 38 to 44mm)
Adjustable overflow height : 180 to 240mm (C)
Inner bottom
of cistern
D
A
above the lid
B
C
Tech
nica
l equ
ipm
ents
• Compact water saving mechanism
• Wire cable control, quick and easy to assemble
• Pushbutton and escutcheon chrome finished
• Adjustable small flush
• Adjustable residual water level
• Delivered complete with cistern/bowl seal and screws
• Compact water saving mechanism
• Stirrup clamp type model which enables the fixation of lid and allows wide excentricity
• Self adjustable button (no rod to cut)
• Chrome finished push button and escutcheon
• Adjustable small flush
• Adjustable residual water level
• Delivered complete with cistern/bowl seal and screws
• Water saving mechanism
• Stirrup clamp type model which enables the fixation of the lid
• Chrome finished push button and escutcheon
• Adjustable small flush
• Delivered complete with cistern/bowl seal and screws
above the lid
OPTIMA 50
OPTIMA 49
SKIPPER 36A
above the lid
Inner bottom
of cistern
| | WATERMARK
| | WATERMARK
| | SASO
Description Dimensions
Catalogue 2008/2009 | 45
• Stirrup clamp mechanism which enables the fixation of the lid
• Self adjustable button (no rod to cut)
• Chrome finished push button and escutcheon
• Interruptible flush
• Delivered complete with cistern/bowl seal and screws
• Side wire cable, easy and quick to assemble
• Chrome finished escutcheon and button
• Delivered complete with cistern/bowl seal and screws
• Stirrup clamp mechanism enabling the fixation of the cistern
• Self adjustable button (no rod to cut)
• Chrome finished push button and escutcheon
• Delivered complete with cistern/bowl seal and screws
SWITCH 22A
44 | Catalogue 2008/2009
SINGLE FLUSH MECHANISMS
| | SASO
Push button :double action (x 2 = STOP)
Overflow : precutted and adjustable every 5mm
Valve gasket : made ofNR/EPDM, ensures perfectwatertightness
Strainer gasket, made of mouldedSBS elastomer. Its elasticity andshape reinforce water-tightness atthe bottom of the cistern
Escutcheon :for lid holes from
18 to 37mm or > than 42mm
Stirrup clamp : tolerates ordinary
excentricity In old cisterns
Strainer : made of ABS, very robust, ensures a
powerful rinsing flow of 2.75L/s
Bowl gasket,compensates
for any irregularities of the ceramic.
Compatible with : Lid hole (A), diameter 18 to 50mmDrainage hole (D) diameter from 58 to 72mm
Adjustable height (B) :from 305 to 339mm (Lid hole (A) diameter 18 to 37mm)from 321 to 415mm(Lid hole A, diameter 38 to 42mm)
Adjustable overflow height : 180 to 240mm (C)
D
A
B
C
Escutcheon :for lid holes from
18 to 50mm
Overflow : precutted and adjustable
every 4mm
Strainer : made of ABS, very robust, ensures a
powerful rinsing flow of 2.75L/s
Bowl gasket, compensates
for any irregularities of the ceramic.
Push button : single flush
Button fixing nut
Wire cable : enables side control, (front or side excentricity)
Valve gasket : made of NR/EPDM,ensures perfect watertightness
Strainer gasket, made of moulded SBS elastomer. Its elasticity and shape reinforce water-tightness at the bottom of the cistern
D
A
B
C
Escutcheon :for lid holes from
18 to 37mm or > than 42mm
Stirrup clamp : tolerates ordinary
excentricity In old cisterns
Strainer : made of ABS, very robust, ensures a
powerful rinsing flow of 2.75L/s
Bowl gasket,compensates
for any irregularities of the ceramic.
Push button :single flush
Overflow : precutted and adjustable every 5mm
Valve gasket : made of NR/EPDM,ensures perfect watertightness
Strainer gasket, made of moulded SBS elastomer. Its elasticity and shape reinforce water-tightness at the bottom of the cistern
Compatible with : Lid hole (A), diameter 18 to 50mmDrainage hole (D) diameter from 58 to 72mm
Adjustable height (B) with escutcheon: 272 to 465mm(Lid hole (A) diameter 18 to 37mm and > than 44mm.)Without escutcheon: 287 to 480mm(Lid hole A, diameter 38 to 44mm)
Adjustable overflow height : 180 to 240mm (C)
Compatible with : Lid hole (A), diameter 18 to 50mmDrainage hole (D) diameter from 58 to 72mm
Adjustable height (B) :from 305 to 339mm (Lid hole (A) diameter 18 to 37mm and > than 42mm.)from 321 to 415mm(Lid hole (A) diameter 38 to 42mm)
Adjustable overflow height : 180 to 240mm (C)Inner
bottom of cistern
D
A
above the lid
B
C
Tech
nica
l equ
ipm
ents
SKILL 51
STORM 33A
above the lid
Inner bottom
of cistern
above the lid
Inner bottom
of cistern
Description Dimensions
Catalogue 2008/2009 | 47
• Pull up flusher with chrome button for old Aspirambo Porcher cisterns• Delivered complete with seal flange and screws.
• Pull up flusher with chrome button for old Jacob Delafon cisterns• Delivered complete with cistern/bowl seal and screws
• Pull up flusher with chrome button for old Ideal Standard cisterns• Delivered complete with cistern/bowl seal and screws
• Single flush mechanism with front handle.• Delivered complete with cistern/bowl seal and screws
46 | Catalogue 2008/2009
PULL FLUSH MECHANISMS
ASP 43
JD 44
IS 40
FR 41
Inner bottom
of cistern
D
A
above the lid
B
C
D
C
Lever ring and washer:Needed for lid holes
between 10 and 42mm
Overflow : adjustable, precutted every 5mm
Valve gasket : made ofNR/EPDM, ensures
perfect watertightness
Bowl gasket, compensates for any irregularities
of the ceramic
Control button:White or chrome
Lever : tolerates ordinaryexcentricity in the cistern
Strainer: made of ABS, veryrobust, Ensures a powerful rinsing flow (2.75L/s)
Strainer gasket, made of mouldedSBS elastomer. Its elasticity andshape reinforce watertightness atthe bottom of the cistern
Compatible with : Lid hole (A), diameter 10 to 42mmDrainage hole (D) diameter from 58 to 72mm
Adjustable height (B) :from 255 to 455mm
Adjustable overflow height (C): 180 to 240mm
Compatible with : Drainage hole (D) diameter from 58 to 72mm
Adjustable overflow height (C): 180 to 240mm
Control rod lenght (E) : 350 mm
Adapted to the old ASPIRAMBO PORCHER cisterns
Adapted to the old JACOB DELAFON cisterns
Adapted to the old IDEAL STANDARD cisterns
Control button
Lever
Strainer: made of ABS, veryrobust, ensures a powerfulrinsing flow (2.75L/s)
Special screws
Control button
Overflow
Special screws
Control button
Lever
Special screws
Control rod
Overflow : precutted and adjustable every 5mm
Overflow : adjustable, precutted every 5mm
Valve gasket : made ofNR/EPDM, ensures perfect
watertightness
Seal flange
Valve gasket
Control lever
Valve gasket
Control lever
Strainer: made of ABS, veryrobust, Ensures a powerful rinsing flow (2.75L/s)
Strainer gasket, made of mouldedSBS elastomer. Its elasticity andshape reinforce watertightness atthe bottom of the cistern
Valve gasket made ofNR/EPDM, ensures
perfect watertightness
E
Tech
nica
l equ
ipm
ents
CLASSIC 42
Specific products
| SASO
• Pull up flusher for old cisterns
• Available with button and escutcheon, white or chrome
• Delivered complete with cistern/bowl seal and screws
Description Dimensions
Catalogue 2008/2009 | 49
• Hydraulic closure (no water hammer shock)• Adjustable water level• Silent• Anti-backflow function• Filter can be accessed without taking the water supply system apart• Nickel coated 3/8 brass end-fitting
• Mechanical closure,
• Adjustable water level
• Nickel coated 3/8 brass end-fitting
• Traditional float valve
• Mechanical closure
• 3/8 plastic end-fitting
48 | Catalogue 2008/2009
SIDE INLET VALVES
• Mechanical closure,
• Adjustable water level
• 3/8 brass end-fitting
SASO
Compact sliding floater
End-fitting 3/8 nickel plated brass
Hydraulic closure chamber
Anti-backflow function
Water level adjusting screw,Adjustment range = 105mm
Membrane with insert
Filter
50
250
110
Instant mechanical closure
Water level adjusting screw,Adjustment range = 75 mm
Floater
Sliding casing
140
250
74
End-fitting, 3/8 brass
Closure valve
Rigid down-pipe
Brass rod
Expanded polystyrene floater
End-fitting, 3/8, plastic
Closure valve
Rigid down-pipe
Aluminium rod
Expanded polystyrene floater
Watel level adjustment screw
270
80
110
80
295
Ø 78
85
Tech
nica
l equ
ipm
ents
COMPACT 95L
HANDY 93L
STANDARD 15EL
ROBECO 06
| | DIN
End-fitting 3/8 nickel coated brass
BOTTOM INLET VALVES Description Dimensions
50 | Catalogue 2008/2009 Catalogue 2008/2009 | 51
60
290
90
End-fitting 3/8, brass
Hydraulic closure chamber with membrane
Compact sliding floaterWater level adjustment screw, Adjustment range = 110mm
90
282
60
Water level adjustment screw,Adjustment range = 105mm
Compact sliding floater
Hydraulic closure chamber
End-fitting, 3/8 brass, (alsoavailable in 1/2 brass and 1/2plastic)
Down-pipe
Anti-backflow
• Hydraulic closure (no water hammer shock)
• Adjustable water level
• Silent
• Anti-backflow function
• 3/8 brass end-fitting (available with 1/2 brass or plastic)
• Telescopic version available (3/8 brass, 1/2 brass or plastic)
• Mechanical closure
• Adjustable water level
• 3/8 brass end-fitting (also available with 1/2 brass or plastic)
• Telescopic version available, (3/8 brass, 1/2 brass or plastic
• Hydraulic closure (no water hammer shock)• Adjustable water level• 3/8 brass end-fitting.
107
287
74
Water level adjustment screw, Adjustment range = 75mm
Instant mechanical closure by non return valve
End-fitting, 3/8 brass, (alsoavailable in 1/2 brass and1/2 plastic)
Sliding casing
Floater
SASO
Tech
nica
l equ
ipm
ents
COMPACT 99B
BAS 26EL
|
99T
| WAT
ERM
ARK
93T
HANDY 93B
Membrane with insert
DimensionsWidth (L) 90mmHeight (H) 190mmDepth (P) 105mm
Vents for diffusingthe perfume
Lid
Doser
2 fixing positions
Fixation socket (3/8)
Pouring beak (external filling)
ReservoirUseful capacity 500ml
Float (opening/closing)
WC CLEANING SYSTEM
Tech
nica
l equ
ipm
ents
52 | Catalogue 2008/2009 Catalogue 2008/2009 | 53
Some things necessary to know !The partially stagnant water in a WC cistern and bowl is a real nest of germs (up to 100 million per litre of water). Thesemicro-organisms are not only the source of many allergies, or illnesses, but they also cause other unwanted effects, suchas furring on the walls of the equipment and the cistern, which in turn cause malfunctions and leaks. Unfortunately, that’s not all! This stagnant water favours the deposit and incrustation of limescale (up to 500 grammes peryear, which also causes persistant micro-leaks, without even mentioning the dirty look of the bowl and blocked drain pipes. A toilet which leaks all the time, without knowing it, can waste up to 200 cubic metres per year, costing up to 500€ peryear, depending on the cost of water.The proper maintenance of a WC (disinfectants, anti-limescale products, deodorants and other miracle products) consumesup to 25kg of chemical products, which will cost about 100€, while not caring much for the environment. All this is alsoback-breaking housework which will take about 50 hours per year!
So, here is a new inovation !MULTICARE WC® one simple action will clean, remove limescale, perfume and give a new look to your WC, prevent leaks
and help maintain the equipment in the cistern.
Two-in-one !Here is the first Novelty : the MK 3050W®
This product respects the environment, (100% biodegradable) and it replaces all these products generallyused to maintain a WC.The MK 3050W® is a multi-function formula which eliminates limescale, removes fungus (humidity stains)acts against algae, kills bacteria, deodorises, perfumes, and all this without chlorine (compatible with sceptictanks). Its blue colour prevents photosynthesis. This is a “universal formula” which prevents pollution of the cistern, ensures a shiny toilet bowl, helps theefficiency of the drainage system and perfumes the closet, while protecting the service life of the sealingjoints!Made of organic acids excluding the biocide (in compliance with the CE directive 98/8/CE), this product is not dangerous, (formula listed with the Anti-Poison centre of Paris : safety data sheet available on request, and complies with the following standards : NF T01/102 ISO 11014-1 and to the REACH directive.
The MK 3050W® uses, in its exclusive formula, natural essences made by an original perfume manufacturer in Grasse,worldwide perfume capital.
Available in 2 scents : Country fields ProvenceNB : 1 bottle = 500ml, contents of the doser, sold in packs of 2, is enough for about 500 flushes.
And here is the 2nd Novelty : The diffuserThe other innovation of the MULTICARE WC® system is in its diffusion. The diffuser is comprised of areservoir with 500ml capacity, a 2ml doser and a floater which ensures the opening and closing of thedoser. After each toilet flush, the doser liberates the product all the time when the WC cistern is fillingup with water again. The design of the doser enables it to re-load with MK 3050W® without wastingany product before it closes. Once it is installed, no further manipulation of the tank is needed. This isa system which is economical and precise avoids the usual saturation problem of products in permanentcontact with the water. The contents of the diffuser being equal to that of the spares, there is no moreneed to store the opened product.
• MULTICARE WC® is a product.
Here are some results !Consumption of one single product which is nature friendly (less than 8kg per year for a family of 4 people) for an annualbudget of less than 70€ and less than half an hour household tasks, all that for a healthy and fresh smelling WC!
A quick and easy installation
Description Dimensions
• Flexible pipe
• Multi-diametre stick-on seal
• If you are renovating, this enables you to connect the bowl, whatever the drainageevacuation position (on the wall or the floor) with or without (large or small) excentricity
• Connecting sleeve made of EVA
• Available in straight or off-centered version
• Available in 90 or 100mm diameter
54 | Catalogue 2008/2009
FLEXIBLE PVC PIPES
Catalogue 2008/2009 | 55
EPDM seal
Cistern nozzle, ABS
Body : Stainless steel spiral grooves,
Polypropylene oversheath
ABS nozzle, 4 diametres(90,93,100,110mm)
EPDM seal
Cistern nozzle, ABS
Body : Stainless steel spiral grooves,Polypropyleneoversheath
ABS nozzle, 4 diametres(90,93,100,110mm)
EVA
Flexible flap
85 to 107
9093100110
85 to 107
9093100110
85 to 107
9093100110
120
87 to 107
120
87 to 107
100 to 110100 to 110
88 to 9888 to 98MD 90 ME 90
MD 100 ME 100
ES 400
ES 550
250
to 5
50
550
400
Tech
nica
l equ
ipm
ents
PA 2555
Flexible sleeve
ES 400 / ES 550
• Stretchable pipe with shape retaining memory
• Multi-diametre stick-on seal
• If you are renovating, this enables you to connect the bowl, whatever the drainageevacuation position (on the wall or the floor) with or without (large or small) excentricity
Description Dimensions
• Short Elbow 90° bent pipe
• Glueable M1 PVC
• EPDM bowl seal
• Male and female versions available
• Available with female 40mm diameter overlap
• Straight pipe
• Glueable M1 PVC
• EPDM bowl seal
• Short and long versions available
M193 :PVC M1 repair sleeve for unsleeved drainage tubes Ø 100mm
R 180 : PVC M1 reducer for connecting between non sleeved drainage tubes, Ø 80 and 100mm
R190 :PVC M1 reducer for connecting between non sleeved drainage tubes, Ø 80 and 100mm
R110 :PVC M1 connection for joining between non sleeved drainage tubes, Ø 100 and 110mm.
56 | Catalogue 2008/2009
RIGID WC PIPESP 100 P 100R
M 100L
M 100C
C 100M C 100MR
C 100F C 100FR
M 193 R 180
R 190 R 110
Catalogue 2008/2009 | 57
• Long Elbow 90° bent pipe
• Glueable M1 PVC
• EPDM bowl seal
• Available with female 40mm diameter overlap
Seal clamp
EPDM seal
Body : M1 PVC
Seal clamp
EPDM seal
Body : M1 PVC
Seal clamp
EPDM seal
Body : M1 PVC
Seal clamp
EPDM seal
Body : M1 PVC
85 to 107
85 to 107
350
405
120
Ø int. 94Ø ext. 100
85 to 107
85 to 107
Ø int. 94Ø ext. 100
190
Ø int. 94Ø ext. 100
Ø int. 94Ø ext. 100
85 to 107
120
Ø int. 100Ø ext. 106
Ø int. 40
40
40
113
Ø ext. 106Ø int. 100
Ø ext. 93
Body : M1 PVC
Ø 83
113
Ø ext. 106Ø int. 100
Ø ext. 73
Ø 103
Tech
nica
l equ
ipm
ents
P 100
C 100
M 100
Connections and reducers
VEN
CE
CA
P FE
RR
AT
ESTE
REL
BEA
ULI
EU
BEA
ULI
EUPu
blic
are
as
PRIN
CIP
AU
TE
MEN
TON
AN
TI-C
ON
TAC
T
GEN
ERAT
IONS
VALL
AU
RIS
OPI
O
OPI
O
Publ
ic a
reas
MO
NTE
CA
RLO
MO
NA
CO
FOR
EST
HO
RIZ
ON
Mat
eria
l Polypropylene ✓ ✓ ✓ ✓ ✓ ✓Thermoset ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓MDF ✓ ✓
Type
of f
ixat
ion
Bar-hinge + quick fit plastic screws
✓
Bar-hinge + metal screws ✓ ✓ ✓ ✓ ✓ ✓ ✓
Individual plastic hinges+ metal screws
✓
Individual metal hinges + metal screws
✓ ✓ ✓ ✓ ✓ ✓ ✓
Oth
er
info
rmat
ion Bactericidal treated ✓ ✓ ✓ ✓ ✓
Quick release ✓ ✓Soft closing ✓ ✓ ✓
Dim
ensi
ons
Lenght (in mm) 422 446 414 445 445 425 440 460 455 460 475 475 446 445 435 435
Width (in mm) 361 375 370 361 361 360 375 380 380 380 367 367 380 375 365 365
Bowl inter axis(in mm)
107 to 211
125 to 177
125 to 185
144 to 166
130 to 165
125 to 175
133 to 175
132 to 172
123 to 158
123 to 158
135 to 180
130 to 165
133 to 175
133 to 175
90 to 190
90 to 190
Front/back adjustment(in mm)
+/- 15 +/- 15 +/- 10 +/- 15 +/- 15 +/- 20 +/- 15 +/- 15 +/- 5 +/- 5 +/- 15 +/- 15 +/- 15 +/- 15 +/- 25 +/- 25
58 | Catalogue 2008/2009
toilet seats are compatible with the main standard toilet bowls.The range comprises models made of antistatic polypropylene, thermo-set and MDF. Some of them receive antibacterial treatment
Difference between bactericidal and antibacterial:Antibacterial treatment stops the spread of germs, whereas a bactericidal agent destroys them.
has opted for several years for the bactericidal solution for its seats. The efficiency of this method has been tested in laboratory and hospital environment.
Depending on the models a wide range of hinges is available:Bar or individual hinges, quick-release, soft-closing, polyamide or stainless steel.
For specific uses, the range also comes with special solutions
Toile
t sea
ts
Description Dimensions
• 2 Kg
• Soft closing, fixation by stainless steel hinges
• Bactericidal
• Only available in white
• 2,9 Kg
• Stainless steel hinges
• Bactericidal
• Only available in white
• Fixation by quick release Bar-hinge with metal screws, exists in a special version for collective use (stainless steel hinges)
• Bactericidal
• Available in white, Manhattan, Bahamas, Pergamme, pearl blue, pastel green.
60 | Catalogue 2008/2009
THERMOSET TOILET SEATS
Catalogue 2008/2009 | 61
361
+/-
15
107 to 211
422
375
+/-
15
130 to 165
446
361
+/-
15
144 to 166
445
Polyamide adjustable bar-hinge: metal screw
Material : BactericidalThermoset
Quick release
Shock absorbers :- 4 for the seat- 2 for the lid
Soft closing adjustable stainless steel hinges, quick-fit washers.
Adjustable stainless steel hinges, quick fit washers
Shock absorbers :- 4 for the seat- 2 for the lid
Toile
t sea
ts
VENCE
BEAULIEU
CAP FERRAT
Material : BactericidalThermoset
Material : BactericidalThermoset
Shock absorbers :- 4 for the seat- 2 for the lid
62 | Catalogue 2008/2009 Catalogue 2008/2009 | 63
Description Dimensions
• 2,3 Kg
• Quick release stainless steel hinges
• Bactericidal
• Only available in white
• 1,8 Kg
• Plastic hinges
• Rectangular shaped
• Only available in white
• 1,5 Kg
• Bar-hinge with metal screws
• Available in white or black
ANTI-CONTACT
THERMOSET TOILET SEATS
MENTON
• 1,4 Kg
• Fixation by Bar-hinge with metal screws
• Special anti-contact
• Only available in white
• Available in single version (seat only) or double version (seat and cover)
Quick release metal hinges,Non-slip pads, metal screws
Shock absorbers :- 4 for the seat- 2 for the lid
Shock absorbers :- 4 for the seat- 2 for the lid
Adjustable polyamide individual hinges,metal screws.
Polyamide adjustable bar-hinge, metal screws.
Polyamide adjustable bar-hinge,metal screws.
Shock absorbers :- 4 for the seat- 2 for the lid
Shock absorbers : Built-in
+/-
10
370
125 to 185
414
360
+/-
20
125 to 175
425
375
+/-
15
133 to 175
440
+/-
15
380
132 to 172
460
Toile
t sea
ts
ESTEREL
PRINCIPAUTÉ Material : Thermoset
Material : Thermoset
Material : Thermoset
Material : BactericidalThermoset
64 | Catalogue 2008/2009
Description Dimensions
GENERATIONS
VALLAURIS
OPIO
MONTE-CARLO
MONACO
POLYPROPYLENE TOILET SEATS
Catalogue 2008/2009 | 65
• 2,4 Kg• Built-in child seat• Soft closing• Bar-hinge with metal screws• Only available in white
• 1,8 Kg• Soft closing• Bar-hinge with metal screws• Only available in white
• 1,7 Kg• Bar-hinge with metal screws, also exists for collective use, (stainless steel hinges)• Available in white, manhattan, bahamas, pergamme, pearl blue, pastel, green
• 1,4 Kg• Bar-hinge with metal screws• Available in white, anthracite, manhattan, bahamas, pergamme, pearl blue, pastel
green.
• 0,9 Kg• Bar-hinge with plastic screws and quick fit washer• Available in white and anthracite.
Material : Antistaticpolypropylene
Soft closing adjustable bar-hinge, metal screws
Shock absorbers : - 4 seat shock absorbers
Material : Antistaticpolypropylene
Soft closing adjustable bar-hinge, metal screws
Shock absorbers : - 4 seat shock absorbers
Material : Antistaticpolypropylene
Adjustable polyamide bar-hinge, metal screws
Shock absorbers : - 4 seat shock absorbers,- 2 lid shock absorbers
Material : Antistaticpolypropylene
Adjustable polyamide bar-hinge, metal screws
Shock absorbers : - 4 seat shock absorbers,- 2 lid shock absorbers
Material : Antistaticpolypropylene
Adjustable polyamide bar-hinge, plastic screws with quick fit washer
Built-in shock absorbers(easy clean)
② ③①
380
+/-
5
123 to 158
455
380
+/-
5
123 to 158
460
367
+/-
15
135 to 180
475
380
+/-
15
133 to 175
446
375
+/-
15
133 to 175
445 Toile
t sea
ts
quick fit
Description DimensionsMDF TOILET SEATS
66 | Catalogue 2008/2009 Catalogue 2008/2009 | 67
430
365
430
365
Adjustable chromed zamac hinges with metal screws
Adjustable chromed zamac hinges with metal screws
Toile
t sea
ts
• 2,8 Kg
• Anti UV, waterproofed
• Whithstands cleaning products and scratches
• Chromed zamac individual hinges and metal screws, with centering rod
• Available in wood finishes
1 - Traditional light colour2 - Traditional dark colour3 - Trendy light colour4 - Trendy dark colour5 - Trendy purple6 - Trendy metallic effect
Material : Waterproofed MDFanti UV
Shock absorbers :- 4 for the seat- 2 for the lid
Material : Waterproofed MDFanti UV
Shock absorbers :- 4 for the seat- 2 for the lid
FOREST
HORIZON• 2,8 Kg
• Anti UV, waterproofed
• Whithstands cleaning products and scratches
• Chromed Zamac individual hinges and metal screws, with centering rod
• Available in a wood finish :
1 - Snow (white) 2 - Night (black)3 - Marine (blue)4 - Metal (grey)
1 2 3 4
1 2 3 4 5 6