Test Results Summary for Cisco Prime Infrastructure 3.0 for Japan (Release Version 3.0.0.0.78) First Published: September 03, 2015 Last Modified: September 08, 2015 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Text Part Number:
28
Embed
Test Results Summary for Cisco Prime Infrastructure 3.0 ... · Test Results Summary for Cisco Prime Infrastructure 3.0 for Japan (Release Version 3.0.0.0.78) iv Contents
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Test Results Summary for Cisco Prime Infrastructure 3.0 for Japan(Release Version 3.0.0.0.78)First Published: September 03, 2015
Last Modified: September 08, 2015
Americas HeadquartersCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706USAhttp://www.cisco.comTel: 408 526-4000 800 553-NETS (6387)Fax: 408 527-0883
C H A P T E R 2 Test Topology and Environment Matrix 7
Test Topology 8
Environment Matrix 8
What's New ? 10
Open Caveats 10
C H A P T E R 3 New Features - Test Summary 11
Monitoring the High Availability (HA) standby WLC 11
Guest Anchor Priority 13
Cisco WLC integration with Lync SDN API 14
AVC for Flex Connect Locally switched Access Points 17
Interference Awareness 18
C H A P T E R 4 Regression Features - Test Summary 21
SR 21
Adhoc Test cases 21
Related Documentation 23
Test Results Summary for Cisco Prime Infrastructure 3.0 for Japan (Release Version 3.0.0.0.78) iii
Test Results Summary for Cisco Prime Infrastructure 3.0 for Japan (Release Version 3.0.0.0.78)iv
Contents
C H A P T E R 1Overview
• Prime Infrastructure test , page 1
Prime Infrastructure testCisco Prime Infrastructure test , an integral part of the enterprise wireless solution, is a program that validatesvarious CiscoWireless Products and Features. This is achieved by testing the latest versions of Cisco wirelessproducts
Cisco Prime Infrastructure for Japan , in turn is an add-on testing at the solution level, where the requirementsgathered are specific to Japanese usage and market. The requirements are derived based on the following:
• New features in PI 3.0
• Customer found defects in selected wireless products
• High priority scenarios and basic regression features
• Inputs from Cisco SEs/ TAC
The test execution is carried out on selected CiscoWireless LAN products, which affect the Japanese segmentthat are prioritized by Cisco Japan team.
The following products are covered in the test execution:
• Cisco Wireless LAN Controller 5508
• Cisco Wireless LAN Controller 2500
• Cisco Wireless LAN Flex Controller 7500
• Cisco Wireless LAN Flex Controller 8500
• Cisco Wireless LAN Controller 5520
•WiSM2 Controller
• Virtual Controller
• Access Point 3500
• Access Point 1700
Test Results Summary for Cisco Prime Infrastructure 3.0 for Japan (Release Version 3.0.0.0.78) 1
• Access Point 3600
• Access Point 3700
• Access Point 2600
• Access Point 1530
• Access Point 1550
• Access Point 1600
• Access Point 2700
• Access Point 1570
• Access Point 702
• Cisco OEAP 602
• Cisco Prime Network Control System
• Cisco Prime Infrastructure
Acronyms
DescriptionAcronym
Authentication Authorization and AccountingAAA
Access Control ListACL
Access Control ServerACS
Authentication Key ManagementAKM
Access PointAP
Application Programming InterfaceAPI
Application Visibility and Control.AVC
Bridge Group NetworkBGN
Bluetooth Low EnergyBLE
Bring Your Own DeviceBYOD
Central AuthenticationCA
Call Admissions ControlCAC
Control and Provisioning of Wireless Access PointCAPWAP
Cisco Centralized Key ManagementCCKM
Channel Change NotificationCCN
Cisco Compatible ExtensionsCCX
Cisco Discovery ProtocolCDP
Cisco Key Integrity ProtocolCKIP
Test Results Summary for Cisco Prime Infrastructure 3.0 for Japan (Release Version 3.0.0.0.78)2
Peer Device memoryUtilization underMonitor Device SystemSummary of aredundancy pairedcontroller
WLJPI3.0_HA_MON_11
PassedTo Verify whetherMonitor RedundancySummary for 8.1Controller & above fornew reachability latencyfields is displayedcorrectly
Monitor RedundancySummary for 8.1Controller & above fornew reachability latencyfields
WLJPI3.0_HA_MON_12
PassedTo Verify whetherMonitor RedundancySummary for Bulk SyncStatus for 8.1 controller& above is displayed
monitor RedundancySummary for BulkStatus for 8.1 controller& above
WLJPI3.0_HA_MON_13
Test Results Summary for Cisco Prime Infrastructure 3.0 for Japan (Release Version 3.0.0.0.78)12
New Features - Test SummaryMonitoring the High Availability (HA) standby WLC
PassedTo Verify whether theController pair upgradefrom earlier image to 8.1& check the redundancyparameters
Controller pair upgradefrom earlier image to 8.1& check the redundancyparameters
WLJPI3.0_HA_MON_15
PassedTo Verify whether thenon-root user logged intoNon-root VD access newredundancy parameters& monitor devicesummary page for peerdevice data along withAlarms seen in thenon-root Virtual domain
Non-root user loggedinto Non-root VD accessnew redundancyparameters & monitordevice summary page forpeer device data alongwith Alarms
WLJPI3.0_HA_MON_16
PassedTo Verify whether theOnline Help for newRedundancy parametersin both Config&monitorpages displayedsuccessfully
Online Help for newRedundancy parametersin both Config &monitor pages
WLJPI3.0_HA_MON_17
Guest Anchor PriorityDefectStatusDescriptionTitleLogical ID
PassedTo verify the clientconnectivity with guestanchor priority
Guest anchor -clientconnectivity (Internal)
WLJPI3.0_Anchor_01
PassedTo verify the mobility anchorsettings
Mobility Anchorsetting for WLANprofile
WLJPI3.0_Anchor_02
PassedTo verify the mobility anchorpriority
Setting the mobilityanchor priority
WLJPI3.0_Anchor_03
CSCuv79003FailedTo verify the Foreign anchorsettings
Foreign anchor onwlan profile
WLJPI3.0_Anchor_04
PassedTo verify the guest anchorpriority when wlan profile isenabled
Removing the wlanconfiguration withanchor settings
WLJPI3.0_Anchor_05
PassedTo verify the single wlan withmore than one anchor
Mobility Anchorsetting for WLANprofile-2500
WLJPI3.0_Anchor_06
Test Results Summary for Cisco Prime Infrastructure 3.0 for Japan (Release Version 3.0.0.0.78) 13
New Features - Test SummaryGuest Anchor Priority
PassedTo verify the guest priorityconfiguration whenWLAN isenabled
Guest Anchor priorityconfiguration when itis enabled
WLJPI3.0_Anchor_07
PassedTo verify the more than oneanchor wlc s
More than one anchorpriority setting forsingle wlan
WLJPI3.0_Anchor_08
Passedto verify the guest anchorconfiguration when AP inFlex Connect Mode
Guest anchor priorityconfiguration whenthe AP is in flexconnect mode
WLJPI3.0_Anchor_09
PassedTo verify the control and datapath event in PI
Control and data pathevent in PI
WLJPI3.0_Anchor_10
PassedTo verify the configurationsync from wlc to PI
Setting the mobilityanchor priority fromwlc
WLJPI3.0_Anchor_11
PassedTo verify the mobility anchorwith WEP
Mobility anchor withL2 security as WEP
WLJPI3.0_Anchor_12
PassedTo verify the mobility anchorsettings in PI monitor
Cleanair -WiFiinterference and trapsupportconfiguration in802.11b/g/n for 8.1Controller from PI
WLJPI3.0_INT_AWR_8
PassedTo verify whether the templatebased Audit on Roguecontribution and duty cycle in802.11a/n and 802.11b/g/nDCA configuration
Template basedAudit on Roguecontribution andduty cycle in802.11a/n DCA and802.11b/g/n
WLJPI3.0_INT_AWR_10
PassedTo verify whether the RogueContribution and cleanairWiFi interference works inVirtual domain
Rogue Contributionand cleanair WiFiinterference
WLJPI3.0_INT_AWR_12
PassedTo check whether the RRMmonitor show mismatch inconfiguration in leader andslaves controller.
RF Groups withConfigurationMismatches
WLJPI3.0_INT_AWR_13
Test Results Summary for Cisco Prime Infrastructure 3.0 for Japan (Release Version 3.0.0.0.78) 19
New Features - Test SummaryInterference Awareness
PassedTo check non-root user accessto new Rogue Contribution/WiFi Interferer parameters inboth Config & RRM monitorpages
Non-root user accessto new RogueContribution /WiFiInterferer parameters
WLJPI3.0_INT_AWR_14
PassedTo check the "Channel ChangeReason" because ofInterference is reflected in theRRM page
Create channelchange because ofInterference andnote down theresults in last 24hours /7 days
WLJPI3.0_INT_AWR_16
PassedTo verify whether the"Channel Change Reason"because of noise is reflected inthe RRM page
Create channelchange because ofnoise and note downthe results in last 24hours /7 days
WLJPI3.0_INT_AWR_17
PassedTo check whether the RRMstatistics shows the TotalConfiguration Mismatchesaccurately
Total ConfigurationMismatchesverification
WLJPI3.0_INT_AWR_18
PassedTo check the Config auditreport for Roguecontribution/duty cycle andWiFi interference
Audit report forRoguecontribution/dutycycle
WLJPI3.0_INT_AWR_19
PassedTo verify whether the RRMstatistics shows the AP's atmaximum power valuecorrectly and the link leads toRRM > APs operating atmaximum power > Radio802.11a/n / 802.11b/g/n page
Percentage of AP'sat maximum powerlink verification
WLJPI3.0_INT_AWR_20
PassedTo verify the number of RFGroups under RRM statisticsis reflected properly
Number of RFGroups under RRMstatistics verification
WLJPI3.0_INT_AWR_21
PassedTo verify the RRM statisticsshows Total Channel Changesaccurately
Total ChannelChanges verification
WLJPI3.0_INT_AWR_22
PassedTo check the Tx Power andChannel Report for itsaccuracy when rogue detected
Check Tx Power andChannel Report
WLJPI3.0_INT_AWR_23
Test Results Summary for Cisco Prime Infrastructure 3.0 for Japan (Release Version 3.0.0.0.78)20
New Features - Test SummaryInterference Awareness
C H A P T E R 4Regression Features - Test Summary
• SR, page 21
• Adhoc Test cases, page 21
• Related Documentation, page 23
SRDefectsStatusDescriptionTitleLogical ID
PassedTo verify whether the NTP timezone is properly synchronized anddisplays the time in PI 3.0
Check NTP time zoneof WLC in PI
WLJPI3.0_SR_1
PassedTo verify whether the NTP timezone is properly synchronized anddisplays the time in PI 3.0 forvirtual controller
Check NTP time zoneof vWLC in PI
WLJPI3.0_SR_2
Adhoc Test casesDefect IDStatusDescriptionTitleLogical ID
PassedTo verify whethercall stacks aredisplayed in Lyncsummary pane ornot
Lync SummaryWLJPI3.0_Adhoc_1
Test Results Summary for Cisco Prime Infrastructure 3.0 for Japan (Release Version 3.0.0.0.78) 21
PassedTo verify whetherLync conversationspane generatescallee and callerinformation or not
Lync ConversationsWLJPI3.0_Adhoc_2
PassedTo verify whetherthe time filter worksproperly or not inLync monitoring
Time Filter in Lyncsummary
WLJPI3.0_Adhoc_3
PassedTo verify whetherfilter works in theLync conversationpane
Filter in Lyncconversation
WLJPI3.0_Adhoc_4
CSCuv49474PassedTo verify whetherLync Server configdone in WLC'swireless tab isgetting Sync with PIor not
WLC Lync Configin PI
WLJPI3.0_Adhoc_5
CSCuv64844PassedTo verify whetherClient connectiontype is displayedproperly or not