The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation. The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited. ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally. TEST REPORT Test Report # 16H‐03971 Date of Report Issue: July 28, 2016 Date of Sample Received: July 12, 2016 Pages: Page 1 of 29 ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip Street Kwun Tong Kowloon Hong Kong Tel: (852)3185 8000 AT-1500 Ver.06 CS-HK-RE005-HITP CLIENT INFORMATION: Company: Hit Promotional Products Recipient: Nathan Cotter Recipient Email: [email protected]SAMPLE INFORMATION: Description: 24oz Biggie Tumbler with Lid & 16oz Glacier Tumbler with straw Assortment: 5853‐8 colors, 5889‐5 colors Purchase Order Number: 167824 SKU No.: 5853, 5889 Agent: Brand New Days Factory No.: 106712 Country of Origin: China Country of Distribution: United States Labeled Age Grade: ‐ Quantity Submitted: Refer to Page 2 Recommended Age Grade: ‐ Testing Period: 07/12/2016 – 07/22/2016 07/23/2016 – 07/28/2016 Tested Age Grade: ‐ OVERALL RESULT: PASS Refer to page 3 for test result summary and appropriate notes. ANSECO GROUP (HK) LIMITED Vincent Chow Wai Kit Manager, Chemical Laboratory
29
Embed
TEST REPORT - Hit Promotional Products - Site · CONCLUSION TEST(S) CONDUCTED PASS CPSIA Section 101, Total Lead in Substrate Materials PASS Client’s Requirement: Bisphenol A and
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
TEST REPORT Test Report # 16H‐03971 Date of Report Issue: July 28, 2016
Date of Sample Received: July 12, 2016 Pages: Page 1 of 29
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip Street Kwun Tong Kowloon Hong Kong Tel: (852)3185 8000
Refer to page 3 for test result summary and appropriate notes.
ANSECO GROUP (HK) LIMITED
Vincent Chow Wai Kit
Manager, Chemical Laboratory
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 16H‐03971 Pages: Page 2 of 29
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip Street Kwun Tong Kowloon Hong Kong Tel: (852)3185 8000
Ver.06CS-HK-RE005-HITP
QUABTITU SUBMIITED DETAILED:
Style description Qty.
24oz Bigger Tumbler with Lid ‐ Red 7 pcs
24oz Bigger Tumbler with Lid ‐ Black 8 pcs
24oz Bigger Tumbler with Lid ‐ Lime 7 pcs
24oz Bigger Tumbler with Lid ‐ Orange 8 pcs
24oz Bigger Tumbler with Lid ‐ Smoke 8 pcs
24oz Bigger Tumbler with Lid ‐ Purple 8 pcs
24oz Bigger Tumbler with Lid‐Blue 8 pcs
24oz Bigger Tumbler with Lid ‐ Aqua 6 pcs
16oz Glacier tumbler with straw ‐ Red 5 pcs
16oz Glacier tumbler with straw ‐ Green 5 pcs
16oz Glacier tumbler with straw ‐ Blue 5 pcs
16oz Glacier tumbler with straw ‐ Black 5 pcs
16oz Glacier tumbler with straw ‐ Clear 5 pcs
Parts 2 lots
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 16H‐03971 Pages: Page 3 of 29
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip Street Kwun Tong Kowloon Hong Kong Tel: (852)3185 8000
Ver.06CS-HK-RE005-HITP
TEST RESULTS SUMMARY:
At the request of the client, the following tests were conducted:
CONCLUSION TEST(S) CONDUCTED
PASS CPSIA Section 101, Total Lead in Substrate Materials
PASS Client’s Requirement: Bisphenol A and Bisphenol S#
PASS FDA 21 CFR 177.1210, Closures with Sealing Gaskets#
PASS FDA 21 CFR 177.1520, Polypropylene Homopolymers
PASS FDA 21 CFR 180.22 and 181.32, Acrylonitrile/Butadiene/Styrene Copolymers
PASS FDA 21 CFR 180.22 and 181.32, Acrylonitrile/Styrene Copolymers
PASS Canadian Consumer Products Containing Lead (Contact with Mouth) Regulation (SOR/2010‐273), Total Lead in Accessible Substrates
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 16H‐03971 Pages: Page 4 of 29
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip Street Kwun Tong Kowloon Hong Kong Tel: (852)3185 8000
Ver.06CS-HK-RE005-HITP
DETAILED RESULTS:
CPSIA Section 101, Total Lead in Substrate Materials Test Method: CPSC‐CH‐E1001‐08.3 (Metal), CPSC‐CH‐E1002‐08.3 (Non‐Metal) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 1 2+3+4 5+6+7 8+9+10 11+12+13 Total
Test Item Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Total Lead (Pb) ND ND ND ND ND 100
Conclusion PASS PASS PASS PASS PASS
Specimen No. 14+15+16 17+18+19 20+21+22 23+24+25 26+27+28 Total
Test Item Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Total Lead (Pb) ND ND ND ND ND 100
Conclusion PASS PASS PASS PASS PASS
Specimen No. 29+30+31 32+33 34+35 36+37 ‐‐‐ Total
Test Item Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Total Lead (Pb) ND ND ND ND ‐‐‐ 100
Conclusion PASS PASS PASS PASS ‐‐‐
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) LT = Less than ND = Not detected (Reporting Limit = 20 ppm) Composite results are based on specimen of least mass resulting in highest potential concentration. Data Consolidation Reference
Specimen No. Transferred from
Date of Issue Report No. Specimen No.
1 16H‐03520 1 June 29, 2016
36+37 16H‐03520 7+8 June 29, 2016
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 16H‐03971 Pages: Page 5 of 29
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip Street Kwun Tong Kowloon Hong Kong Tel: (852)3185 8000
Ver.06CS-HK-RE005-HITP
DETAILED RESULTS: Client’s Requirement: Bisphenol A and Bisphenol S Test Method: AI|ANSECO Method#
Analytical Method: Liquid Chromatography with Mass Spectrometry
Specimen No. 1 2 3 4
Test Item CAS No. Result (ppb)
Result (ppb)
Result (ppb)
Result (ppb)
Limit (ppb)
Bisphenol A (BPA) 80‐05‐7 ND ND ND ND ND
Bisphenol S (BPS) 80‐09‐1 ND ND ND ND ND
Conclusion PASS PASS PASS PASS
Specimen No. 5 6 7 8
Test Item CAS No. Result (ppb)
Result (ppb)
Result (ppb)
Result (ppb)
Limit (ppb)
Bisphenol A (BPA) 80‐05‐7 ND ND ND ND ND
Bisphenol S (BPS) 80‐09‐1 ND ND ND ND ND
Conclusion PASS PASS PASS PASS
Specimen No. 9 10 11 12
Test Item CAS No. Result (ppb)
Result (ppb)
Result (ppb)
Result (ppb)
Limit (ppb)
Bisphenol A (BPA) 80‐05‐7 ND ND ND ND ND
Bisphenol S (BPS) 80‐09‐1 ND ND ND ND ND
Conclusion PASS PASS PASS PASS
Note: ppb (Parts per billion) = µg/kg (Micrograms per kilogram) LT = Less than ND = Not detected (Reporting limit: BPA = 1000 ppb; BPS = 200 ppb)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 16H‐03971 Pages: Page 6 of 29
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip Street Kwun Tong Kowloon Hong Kong Tel: (852)3185 8000
Ver.06CS-HK-RE005-HITP
DETAILED RESULTS: Client’s Requirement: Bisphenol A and Bisphenol S Test Method: AI|ANSECO Method#
Analytical Method: Liquid Chromatography with Mass Spectrometry
Specimen No. 13 14 15 16
Test Item CAS No. Result (ppb)
Result (ppb)
Result (ppb)
Result (ppb)
Limit (ppb)
Bisphenol A (BPA) 80‐05‐7 ND ND ND ND ND
Bisphenol S (BPS) 80‐09‐1 ND ND ND ND ND
Conclusion PASS PASS PASS PASS
Specimen No. 17 18 19 20
Test Item CAS No. Result (ppb)
Result (ppb)
Result (ppb)
Result (ppb)
Limit (ppb)
Bisphenol A (BPA) 80‐05‐7 ND ND ND ND ND
Bisphenol S (BPS) 80‐09‐1 ND ND ND ND ND
Conclusion PASS PASS PASS PASS
Specimen No. 21 22 23 24
Test Item CAS No. Result (ppb)
Result (ppb)
Result (ppb)
Result (ppb)
Limit (ppb)
Bisphenol A (BPA) 80‐05‐7 ND ND ND ND ND
Bisphenol S (BPS) 80‐09‐1 ND ND ND ND ND
Conclusion PASS PASS PASS PASS
Note: ppb (Parts per billion) = µg/kg (Micrograms per kilogram) LT = Less than ND = Not detected (Reporting limit: BPA = 1000 ppb; BPS = 200 ppb)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 16H‐03971 Pages: Page 7 of 29
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip Street Kwun Tong Kowloon Hong Kong Tel: (852)3185 8000
Ver.06CS-HK-RE005-HITP
DETAILED RESULTS: Client’s Requirement: Bisphenol A and Bisphenol S Test Method: AI|ANSECO Method#
Analytical Method: Liquid Chromatography with Mass Spectrometry
Specimen No. 25 26 27 28
Test Item CAS No. Result (ppb)
Result (ppb)
Result (ppb)
Result (ppb)
Limit (ppb)
Bisphenol A (BPA) 80‐05‐7 ND ND ND ND ND
Bisphenol S (BPS) 80‐09‐1 ND ND ND ND ND
Conclusion PASS PASS PASS PASS
Specimen No. 29 30 31 32
Test Item CAS No. Result (ppb)
Result (ppb)
Result (ppb)
Result (ppb)
Limit (ppb)
Bisphenol A (BPA) 80‐05‐7 ND ND ND ND ND
Bisphenol S (BPS) 80‐09‐1 ND ND ND ND ND
Conclusion PASS PASS PASS PASS
Note: ppb (Parts per billion) = µg/kg (Micrograms per kilogram) LT = Less than ND = Not detected (Reporting limit: BPA = 1000 ppb; BPS = 200 ppb)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 16H‐03971 Pages: Page 8 of 29
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip Street Kwun Tong Kowloon Hong Kong Tel: (852)3185 8000
Ver.06CS-HK-RE005-HITP
DETAILED RESULTS: Client’s Requirement: Bisphenol A and Bisphenol S Test Method: AI|ANSECO Method#
Analytical Method: Liquid Chromatography with Mass Spectrometry
Specimen No. 33 34 35 37
Test Item CAS No. Result (ppb)
Result (ppb)
Result (ppb)
Result (ppb)
Limit (ppb)
Bisphenol A (BPA) 80‐05‐7 ND ND ND ND ND
Bisphenol S (BPS) 80‐09‐1 ND ND ND ND ND
Conclusion PASS PASS PASS PASS
Specimen No. 38 ‐‐‐ ‐‐‐ ‐‐‐
Test Item CAS No. Result (ppb)
Result (ppb)
Result (ppb)
Result (ppb)
Limit (ppb)
Bisphenol A (BPA) 80‐05‐7 ND ‐‐‐ ‐‐‐ ‐‐‐ ND
Bisphenol S (BPS) 80‐09‐1 ND ‐‐‐ ‐‐‐ ‐‐‐ ND
Conclusion PASS ‐‐‐ ‐‐‐ ‐‐‐
Note: ppb (Parts per billion) = µg/kg (Micrograms per kilogram) LT = Less than ND = Not detected (Reporting limit: BPA = 1000 ppb; BPS = 200 ppb) Data Consolidation Reference
Specimen No. Transferred from
Date of Issue Report No. Specimen No.
1 16H‐03520 1 June 29, 2016
2 16H‐03520 2 June 29, 2016
26 16H‐03520 9 June 29, 2016
30 16H‐03520 12 June 29, 2016
37 16H‐03520 14 June 29, 2016
38 16H‐03520 13 June 29, 2016
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 16H‐03971 Pages: Page 9 of 29
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip Street Kwun Tong Kowloon Hong Kong Tel: (852)3185 8000
Ver.06CS-HK-RE005-HITP
DETAILED RESULTS:
FDA 21 CFR 177.1210, Closures with Sealing Gaskets Test Method: FDA 21 CFR 177.1210#
Specimen No. 1
Test Item Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (ppm) 120°F 24 hours ND 10 50
Conclusion PASS
Note: Temp. = Temperature °F = Degree Fahrenheit ppm (Parts per million) = mg/kg (Milligrams per kilogram) LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 177.1210 Table 2 Section 2.
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 16H‐03971 Pages: Page 10 of 29
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip Street Kwun Tong Kowloon Hong Kong Tel: (852)3185 8000
Ver.06CS-HK-RE005-HITP
DETAILED RESULTS: FDA 21 CFR 177.1520, Polypropylene Homopolymers Test Method: FDA 21 CFR 177.1520
Note: Temp. = Temperature °C = Degree Celsius g/cc = Grams per cubic centimeter % w/w = Percent by weight NA = Not applicable LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 177.1520 (c) 1.1.
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 16H‐03971 Pages: Page 11 of 29
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip Street Kwun Tong Kowloon Hong Kong Tel: (852)3185 8000
Ver.06CS-HK-RE005-HITP
DETAILED RESULTS: FDA 21 CFR 177.1520, Polypropylene Homopolymers Test Method: FDA 21 CFR 177.1520
Note: Temp. = Temperature °C = Degree Celsius g/cc = Grams per cubic centimeter % w/w = Percent by weight NA = Not applicable LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 177.1520 (c) 1.1.
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 16H‐03971 Pages: Page 12 of 29
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip Street Kwun Tong Kowloon Hong Kong Tel: (852)3185 8000
Ver.06CS-HK-RE005-HITP
DETAILED RESULTS: FDA 21 CFR 177.1520, Polypropylene Homopolymers Test Method: FDA 21 CFR 177.1520
Note: Temp. = Temperature °C = Degree Celsius g/cc = Grams per cubic centimeter % w/w = Percent by weight NA = Not applicable LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 177.1520 (c) 1.1.
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 16H‐03971 Pages: Page 13 of 29
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip Street Kwun Tong Kowloon Hong Kong Tel: (852)3185 8000
Ver.06CS-HK-RE005-HITP
DETAILED RESULTS: FDA 21 CFR 177.1520, Polypropylene Homopolymers Test Method: FDA 21 CFR 177.1520
Note: Temp. = Temperature °C = Degree Celsius g/cc = Grams per cubic centimeter % w/w = Percent by weight NA = Not applicable LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 177.1520 (c) 1.1.
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 16H‐03971 Pages: Page 14 of 29
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip Street Kwun Tong Kowloon Hong Kong Tel: (852)3185 8000
Ver.06CS-HK-RE005-HITP
DETAILED RESULTS: FDA 21 CFR 177.1520, Polypropylene Homopolymers Test Method: FDA 21 CFR 177.1520
Note: Temp. = Temperature °C = Degree Celsius g/cc = Grams per cubic centimeter % w/w = Percent by weight NA = Not applicable LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 177.1520 (c) 1.1.
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 16H‐03971 Pages: Page 15 of 29
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip Street Kwun Tong Kowloon Hong Kong Tel: (852)3185 8000
Ver.06CS-HK-RE005-HITP
DETAILED RESULTS: FDA 21 CFR 177.1520, Polypropylene Homopolymers Test Method: FDA 21 CFR 177.1520
Note: Temp. = Temperature °C = Degree Celsius g/cc = Grams per cubic centimeter % w/w = Percent by weight NA = Not applicable LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 177.1520 (c) 1.1.
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 16H‐03971 Pages: Page 16 of 29
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip Street Kwun Tong Kowloon Hong Kong Tel: (852)3185 8000
Ver.06CS-HK-RE005-HITP
DETAILED RESULTS: FDA 21 CFR 177.1520, Polypropylene Homopolymers Test Method: FDA 21 CFR 177.1520
Note: Temp. = Temperature °C = Degree Celsius g/cc = Grams per cubic centimeter % w/w = Percent by weight NA = Not applicable LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 177.1520 (c) 1.1.
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 16H‐03971 Pages: Page 17 of 29
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip Street Kwun Tong Kowloon Hong Kong Tel: (852)3185 8000
Ver.06CS-HK-RE005-HITP
Data Consolidation Reference
Specimen No. Transferred from
Date of Issue Report No. Specimen No.
2 16H‐03520 2 June 29, 2016
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 16H‐03971 Pages: Page 18 of 29
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip Street Kwun Tong Kowloon Hong Kong Tel: (852)3185 8000
Ver.06CS-HK-RE005-HITP
DETAILED RESULTS: FDA 21 CFR 180.22 and 181.32, Acrylonitrile/Butadiene/Styrene Copolymers Test Method: FDA 21 CFR 180.22 and 181.32 Analytical Method: Headspace‐Gas Chromatography with Mass Spectrometry
Acrylonitrile Monomers:
Specimen No. 21
Test Simulant Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
Note: Temp. = Temperature °F = Degree Fahrenheit mg/in2 = Milligrams per square inch LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 181.32 (b) (3).
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 16H‐03971 Pages: Page 19 of 29
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip Street Kwun Tong Kowloon Hong Kong Tel: (852)3185 8000
Ver.06CS-HK-RE005-HITP
DETAILED RESULTS: FDA 21 CFR 180.22 and 181.32, Acrylonitrile/Butadiene/Styrene Copolymers Test Method: FDA 21 CFR 180.22 and 181.32 Analytical Method: Headspace‐Gas Chromatography with Mass Spectrometry
Acrylonitrile Monomers:
Specimen No. 24
Test Simulant Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
Note: Temp. = Temperature °F = Degree Fahrenheit mg/in2 = Milligrams per square inch LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 181.32 (b) (3).
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 16H‐03971 Pages: Page 20 of 29
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip Street Kwun Tong Kowloon Hong Kong Tel: (852)3185 8000
Ver.06CS-HK-RE005-HITP
DETAILED RESULTS: FDA 21 CFR 180.22 and 181.32, Acrylonitrile/Styrene Copolymers Test Method: FDA 21 CFR 180.22 and 181.32 Analytical Method: Headspace‐Gas Chromatography with Mass Spectrometry
Acrylonitrile Monomers:
Specimen No. 11
Test Simulant Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
Note: Temp. = Temperature °F = Degree Fahrenheit mg/in2 = Milligrams per square inch LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 181.32 (b) (3).
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 16H‐03971 Pages: Page 21 of 29
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip Street Kwun Tong Kowloon Hong Kong Tel: (852)3185 8000
Ver.06CS-HK-RE005-HITP
DETAILED RESULTS: FDA 21 CFR 180.22 and 181.32, Acrylonitrile/Styrene Copolymers Test Method: FDA 21 CFR 180.22 and 181.32 Analytical Method: Headspace‐Gas Chromatography with Mass Spectrometry
Acrylonitrile Monomers:
Specimen No. 14
Test Simulant Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
Note: Temp. = Temperature °F = Degree Fahrenheit mg/in2 = Milligrams per square inch LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 181.32 (b) (3).
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 16H‐03971 Pages: Page 22 of 29
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip Street Kwun Tong Kowloon Hong Kong Tel: (852)3185 8000
Ver.06CS-HK-RE005-HITP
DETAILED RESULTS: FDA 21 CFR 180.22 and 181.32, Acrylonitrile/Styrene Copolymers Test Method: FDA 21 CFR 180.22 and 181.32 Analytical Method: Headspace‐Gas Chromatography with Mass Spectrometry
Acrylonitrile Monomers:
Specimen No. 27
Test Simulant Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
Note: Temp. = Temperature °F = Degree Fahrenheit mg/in2 = Milligrams per square inch LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 181.32 (b) (3).
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 16H‐03971 Pages: Page 23 of 29
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip Street Kwun Tong Kowloon Hong Kong Tel: (852)3185 8000
Ver.06CS-HK-RE005-HITP
DETAILED RESULTS: FDA 21 CFR 180.22 and 181.32, Acrylonitrile/Styrene Copolymers Test Method: FDA 21 CFR 180.22 and 181.32 Analytical Method: Headspace‐Gas Chromatography with Mass Spectrometry
Acrylonitrile Monomers:
Specimen No. 30
Test Simulant Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
Note: Temp. = Temperature °F = Degree Fahrenheit mg/in2 = Milligrams per square inch LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 181.32 (b) (3).
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 16H‐03971 Pages: Page 24 of 29
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip Street Kwun Tong Kowloon Hong Kong Tel: (852)3185 8000
Ver.06CS-HK-RE005-HITP
DETAILED RESULTS: FDA 21 CFR 180.22 and 181.32, Acrylonitrile/Styrene Copolymers Test Method: FDA 21 CFR 180.22 and 181.32 Analytical Method: Headspace‐Gas Chromatography with Mass Spectrometry
Acrylonitrile Monomers:
Specimen No. 33
Test Simulant Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
Note: Temp. = Temperature °F = Degree Fahrenheit mg/in2 = Milligrams per square inch LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 181.32 (b) (3).
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 16H‐03971 Pages: Page 25 of 29
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip Street Kwun Tong Kowloon Hong Kong Tel: (852)3185 8000
Ver.06CS-HK-RE005-HITP
DETAILED RESULTS: FDA 21 CFR 180.22 and 181.32, Acrylonitrile/Styrene Copolymers Test Method: FDA 21 CFR 180.22 and 181.32 Analytical Method: Headspace‐Gas Chromatography with Mass Spectrometry
Acrylonitrile Monomers:
Specimen No. 37
Test Simulant Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
Note: Temp. = Temperature °F = Degree Fahrenheit mg/in2 = Milligrams per square inch LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 181.32 (b) (3). Data Consolidation Reference
Specimen No. Transferred from
Date of Issue Report No. Specimen No.
26 16H‐03520 9 June 29, 2016
30 16H‐03520 12 June 29, 2016
37 16H‐03520 14 June 29, 2016
38 16H‐03520 13 June 29, 2016
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 16H‐03971 Pages: Page 26 of 29
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip Street Kwun Tong Kowloon Hong Kong Tel: (852)3185 8000
Ver.06CS-HK-RE005-HITP
DETAILED RESULTS: Canadian Consumer Products Containing Lead (Contact with Mouth) Regulation (SOR/2010‐273), Total Lead in Accessible Substrates Test Method: CPSC‐CH‐E1001‐08.3 (Metal), CPSC‐CH‐E1002‐08.3 (Non‐Metal) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 1 2+3+4 5+6+7 8+9+10 11+12+13 Total
Test Item Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Total Lead (Pb) ND ND ND ND ND 90
Conclusion PASS PASS PASS PASS PASS
Specimen No. 14+15+16 17+18+19 20+21+22 23+24+25 26+27+28 Total
Test Item Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Total Lead (Pb) ND ND ND ND ND 90
Conclusion PASS PASS PASS PASS PASS
Specimen No. 29+30+31 32+33 34+35 36+37 ‐‐‐ Total
Test Item Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Total Lead (Pb) ND ND ND ND ‐‐‐ 90
Conclusion PASS PASS PASS PASS ‐‐‐
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) LT = Less than ND = Not detected (Reporting Limit = 20 ppm) Composite results are based on specimen of least mass resulting in highest potential concentration. Data Consolidation Reference
Specimen No. Transferred from
Date of Issue Report No. Specimen No.
1 16H‐03520 1 June 29, 2016
36+37 16H‐03520 7+8 June 29, 2016
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 16H‐03971 Pages: Page 27 of 29
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip Street Kwun Tong Kowloon Hong Kong Tel: (852)3185 8000
26 Transparent red plastic (AS) Inner wall (24oz tumbler – Red style)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 16H‐03971 Pages: Page 28 of 29
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip Street Kwun Tong Kowloon Hong Kong Tel: (852)3185 8000
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 16H‐03971 Pages: Page 29 of 29
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip Street Kwun Tong Kowloon Hong Kong Tel: (852)3185 8000