This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). i
• Type LCB Tool Chart Pages L12-L15• Type LCBH Tool Chart Pages L16-L17
• Type LCBX Tool Chart Pages L22-L23• Type LCC Tool Chart Pages L12-L15
• Found within the first five pages of each section• Provides a quick and easy method to select the proper connector to meet the specific
application requirements
Conductor Type
Stud Hole Configuration
Barrel Configuration
Product Family and Page Number
Agency Listings
Features and Benefits
Full Color Photo and Two-View Drawing
PANDUIT ® and Competitor Die Information
Page Reference for PANDUIT ® and CompetitorInstallation Tooling and Die Selection Charts
Part Number Index• Found in the last section of the catalog• Alphanumeric part number listing
Page Reference for PANDUIT ® and CompetitorInstallation Tooling and Die Selection Charts
• Includes all necessary information for part identification and selection
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). A1
SSYYSSTTEEMM OOVVEERRVVIIEEWW
PANDUIT ® is a global leader in reliable solutions for terminating, splicing, tapping and disconnectingconductors to meet a variety of electrical applications. PANDUIT ® PAN-TERM ® terminal products includeinsulated and non-insulated terminals, disconnects, splices and ferrules for terminating wire sizes#22 AWG – #2 AWG. PANDUIT ® PAN-LUG ™ products include copper and aluminum compression andmechanical connectors for use with conductor sizes #14 AWG – 1,000 kcmil. All PANDUIT ®
connectors are designed to provide ease of identification, fast termination and optimum conductivity.
• World-class quality — ISO9001 and ISO14001
• High performance and reliability
• Ease of installation and use
• Reduction in total cost of ownership
• Meet the requirements of UL, CSA and NEBS Level 3,as noted
PANDUIT ® provides the complete termination system including manual, pneumatic, hydraulicand battery powered hydraulic crimping tools. PANDUIT ® installation tools are designed withergonomic features and controlled cycle mechanisms that facilitate ease of operation and ensurereliable, high quality terminations.With a continued focus on the needs of the customer and ahigh level of investment in research and development, PANDUIT ® Termination Solutions meettoday’s needs.
PC Express offers the ultimate level of service for your power connector needs. PC Express is offered through select authorized PANDUIT ® distributors.The PC Express Program provides customers with the ability to receive power connector orders, via second day delivery, at no additional charge.
The customer can place an order of any size, up to a 300 lb. maximum weight, through an authorized PANDUIT ® distributor and PANDUIT ® will absorb the second day freight charges. All orders will be shipped directly to the customer.Orders received by PANDUIT ® Customer Service before 3:00 P.M. CST will be shipped on the same day, via second day delivery. Orders received after3:00 P.M. CST will be shipped the next business day, via second day delivery.
For more program details, go to www.panduit.com/pcexpress or contact Customer Service at (800) 777-3300.
Note: All programs and benefits are subject to terms and conditions.
PANDUIT ® CUSTOM COPPER COMPRESSION LUGS
PANDUIT ® offers custom lug capabilities to meet your special dimensional specifications and requirements with premium two day or standard twoweek delivery. PANDUIT ® provides a wide variety of dimensional choices for #8 AWG to 250 kcmil copper code lugs and #8 AWG to 4/0 AWG copperflex lugs, including the following options:
Tongues
Stud Holes
Barrels
— Straight or Bent— Stacking — Special Lengths
— Various Sizes, #10 to 1/2"— Multiple Hole Sizes and Spacing— Special Locations
— Three Standard Lengths:Short, Standard and Long
— Custom Lengths
CLIP PROGRAM
The Contractor Loyalty Incentive Program (CLIP) was developed to strengthen relationships and form alliances with valued contractors.Use PANDUIT ® as your preferred vendor for terminals, power connectors, cable ties, identification products, surface raceway, installation tooling anda host of related products, and earn credit towards PANDUIT ® tooling.
Benefits of being a CLIP participant include annual credit incentives, continuous training, potential project leads, alliance with a global, world-classelectrical manufacturer and exclusive promotions.
For more program details, go to www.panduit.com/clip or contact Customer Service at (800) 777-3300.
TOOLING PARTNERSHIP PROGRAM
The Tooling Partnership Program is designed to make low-cost or no cost tooling available to the customer based on qualification and commitmentto termination product purchases.
For more program details, go to www.panduit.com/tpp or contact Customer Service at (800) 777-3300.
For more program details, see pages F110 - F112, go to www.panduit.com/customlugs or contact Customer Service at (800) 777-3300.
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). B1
PPAANN--TTEERRMM ® TTEERRMMIINNAALLSS
PANDUIT ® PAN-TERM ® Terminals are designed and manufactured for fast assembly, and reliableperformance. PANDUIT ® provides an extensive line of tooling designed specifically to provideoptimum performance. As the demand for loose piece terminals increases, it becomes essentialto provide a complete system for termination products.
• Funnel entry available on vinyl and nylon insulatedterminals and disconnects, speeds insertion andminimizes turned back wire strands
• Made of electrolytic copper to provide an optimumcombination of crimp forming and high conductivityproperties to provide optimum terminations
• Offered in various types including rings, forks, flangedforks, locking forks and short locking forks
• Available in sizes from #26 – #2 AWG and stud holediameters from #2 – 1/2 inch. Non-insulated tubularterminals sizes from #8 – 250 kcmil
• Applicable sizes are UL Listed and CSA Certified,as noted
• Wide assortment of manual, controlled cycle, batteryoperated hydraulic and pneumatic crimping tools forreliable connections at the lowest installed cost
PANDUIT ® continually provides new designs to meet the application challenges encountered byour customers. PANDUIT ® offers a wide assortment of PAN-TERM ® termination products to meetcustomer needs at the lowest installed cost.
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
B2
Index
Features and Benefits — PAN-TERM ® Terminals
Non-Insulated Terminals
Non-Insulated Seamless Tubular TerminalsVinyl Insulated Terminals With Insulation Support
Nylon Insulated Terminals With Insulation Grip SleeveType P
Type PN or PNF
Maximum recommended operating temperature 150°C (302°F)
Extended barrel lengthassures a good qualitycrimp and makes crimping easier
Productmarkings provide easy identification ofwire size
All PANDUIT ® Terminals feature high quality materials made with electrolytic copper for high conductivity and are tin plated forcorrosion resistance.
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). B3
Selection Guide — PAN-TERM ® Ring Terminals
Standard Ring Insulation Grip PN-R Pg. B6 Standard Ring Funnel Entry PNF-R Pg. B7Standard Ring Expanded Insulation PN-RX Pg. B6Standard Ring Heavy Duty PN-HDR Pg. B11
Multiple Stud Insulation Grip PN-610R Pg. B7
Nylon
Heat Shrink
Ring Terminals
Vinyl
TEFZEL* Insulated
Non-Insulated
Standard Ring Insulation Support PV-R Pg. B8 Standard Ring Expanded Insulation PV-RX Pg. B9Standard Ring Heavy Duty PVF-HDR Pg. B11
Standard Ring Large Wire, Insulation Support PV-R/X Pg. B12
Standard Ring Expanded Insulation, Ins. Support PV-RX Pg. B9
Multiple Stud Insulation Grip PV-610R Pg. B9
Standard Ring Heat Shrink Insulation PH-R Pg. B10
Standard Ring Insulation Grip PT-R Pg. B10
Standard Ring Brazed Seam P-R Pg. B13
Standard Ring High Temp, Brazed Seam P-RHT Pg. B14
Standard Ring Heavy Duty PVF-HDR Pg. B15Standard Ring Large Wire P-R Pg. B15
Multiple Stud Brazed Seam P-610R Pg. B14
Tubular Ring Large Wire, Seamless Barrel S-R Pg. B16
*TEFZEL is a registered trademark of E.I. Dupont De Nemours Co.
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
B4 Prime items appear in BOLD.
Index
Selection Guide — PAN-TERM ® Fork Terminals
Standard Fork Insulation Grip PN-F Pg. B17 Standard Fork Funnel Entry PNF-F Pg. B17
UL 486C (SPLICES)Test Current for Max. 50°CRise (Amps) 5.5 7 9 12 17 18 30 35 50
Min. Tensile Strength* (Lbs.) 3 5 8 10 10 15 25 35 40*Pull-out force of the crimped terminal.
—
T E R M I N A T I O N S O L U T I O N S
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
B6 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Ring Terminal, Nylon Insulated
*Wire sizes #26-22 AWG, are not UL Listed or CSA Certified.**To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for abulk package of 500.‡UL and CSA approved tooling/product combinations.
C
L
W
• Insulation grip sleeve
Ring Terminal, Nylon Insulated – Expanded Insulation
**To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for abulk package of 500.‡UL and CSA approved tooling/product combinations.
C
W
L
• Insulation grip sleeve• For large wire insulation O.D.
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). B7
Ring Terminal, Nylon Insulated – Funnel Entry
**To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for abulk package of 500.‡UL and CSA approved tooling/product combinations.
C
L
W
• Insulation grip sleeve
Part NumberWire
RangeColorCode
StockThickness
Max.Ins.
StudSize
Figure Dimensions(In.)
Crimp Tool
Std.Pkg.Qty.**
Std.Ctn.Qty.L W C
PNF18-4R-C
22-18AWG
Red
.03 .136 #4 .77 .25 .20
CT-100‡, CT-600‡, CT-1550‡, CT-1551‡
100 500
PNF18-6RN-C .03 .136 #6 .76 .22 .18 100 500
PNF18-6R-C .03 .136 #6 .77 .25 .20 100 500
PNF18-8R-C .03 .136 #8 .87 .31 .24 100 500
PNF18-10R-C .03 .136 #10 .87 .32 .25 100 500
PNF18-14R-C .03 .136 1/4" 1.08 .46 .38 100 500
PNF18-56R-C .03 .136 5/16" 1.08 .46 .39 100 500
PNF18-38R-C .03 .136 3/8" 1.16 .53 .41 100 500
PNF14-4R-C
16-14AWG
Blue
.03 .162 #4 .78 .25 .18
CT-100‡, CT-600‡, CT-1550‡, CT-1551‡
100 500
PNF14-6RN-C .03 .162 #6 .78 .25 .18 100 500
PNF14-6R-C .03 .162 #6 .87 .31 .24 100 500
PNF14-8R-C .03 .162 #8 .87 .31 .25 100 500
PNF14-10R-C .03 .162 #10 .85 .31 .29 100 500
PNF14-14R-C .03 .162 1/4" 1.06 .46 .40 100 500
PNF14-56R-C .03 .162 5/16" 1.06 .46 .40 100 500
PNF14-38R-L .03 .162 3/8" 1.14 .53 .45 50 500
PNF10-6R-L
12-10AWG
Yellow
.04 .225 #6 1.12 .37 .31
CT-100‡, CT-600‡, CT-1550‡, CT-1551‡
50 500
PNF10-8R-L .04 .225 #8 1.12 .37 .31 50 500
PNF10-10R-L .04 .225 #10 1.10 .37 .31 50 500
PNF10-14R-L .04 .225 1/4" 1.25 .52 .38 50 500
PNF10-56R-L .04 .225 5/16" 1.21 .52 .38 50 500
PNF10-38R-L .04 .225 3/8" 1.35 .58 .43 50 500
Multiple Stud Terminal, Nylon Insulated
**To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for abulk package of 500.‡UL and CSA approved tooling/product combinations.
C
L
W
• Insulation grip sleeve• Single terminal for #6, #8 and #10
size studs Part NumberWire
RangeColorCode
StockThickness
Max.Ins.
StudSize
Figure Dimensions(In.)
Crimp Tool
Std.Pkg.Qty.**
Std.Ctn.Qty.L W C
PN18-610R-C 22-18AWG
Red .03 .145
#6, #8, #10
.95 .31 .25
CT-100‡, CT-600‡, CT-1550‡, CT-1551‡
100 500
PN14-610R-C 16-14AWG
Blue .03 .162 .95 .31 .25 100 500
PN10-610R-L 12-10AWG
Yellow .04 .225 1.15 .37 .31 50 500
Type PNF-R
Type PN-610R
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
B8 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Ring Terminal, Vinyl Insulated – Funnel Entry
*Wire sizes #26-22 AWG, are not UL Listed or CSA Certified.**To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for abulk package of 500.‡UL and CSA approved tooling/product combinations.
C
L
W
• Insulation support• Brazed seam
Part NumberWire
RangeColorCode
StockThickness
Max.Ins.
StudSize
Figure Dimensions(In.)
Crimp Tool
Std.Pkg.Qty.**
Std.Ctn.Qty.L W C
PV22-2R-C*
26-22AWG
Yellow
.02 .110 #2 .68 .21 .18
CT-100, CT-600, CT-1525
100 1000
PV22-4R-C* .02 .110 #4 .68 .21 .18 100 1000
PV22-6R-C* .02 .110 #6 .68 .21 .18 100 1000
PV22-8R-C* .02 .110 #8 .78 .26 .26 100 1000
PV22-10R-C* .02 .110 #10 .78 .32 .24 100 1000
PV18-4R-C
22-18AWG
Red
.03 .150 #4 .84 .25 .22
CT-100‡, CT-600‡, CT-1550‡, CT-1551‡
100 500
PV18-6R-C .03 .150 #6 .86 .25 .22 100 500
PV18-8R-C .03 .150 #8 .91 .31 .26 100 500
PV18-10R-C .03 .150 #10 .94 .31 .27 100 500
PV18-14R-C .03 .150 1/4" 1.11 .46 .37 100 500
PV18-56R-C .03 .150 5/16" 1.11 .46 .39 100 500
PV18-38R-C .03 .150 3/8" 1.19 .53 .42 100 500
PV18-12R-C .03 .150 1/2" 1.42 .72 .53 100 500
PV14-4R-C
16-14AWG
Blue
.03 .170 #4 .84 .25 .19
CT-100‡, CT-600‡, CT-1550‡, CT-1551‡
100 500
PV14-6RN-C .03 .170 #6 .84 .25 .19 100 500
PV14-6R-C .03 .170 #6 .92 .31 .25 100 500
PV14-8R-C .03 .170 #8 .92 .31 .25 100 500
PV14-10R-C .03 .170 #10 .92 .31 .25 100 500
PV14-14R-C .03 .170 1/4" 1.12 .46 .38 100 500
PV14-56R-C .03 .170 5/16" 1.12 .46 .38 100 500
PV14-38R-L .03 .170 3/8" 1.21 .53 .43 50 500
PV14-12R-L .03 .170 1/2" 1.42 .72 .53 50 500
PV10-6R-L
12-10AWG
Yellow
.04 .225 #6 1.05 .31 .31
CT-100‡, CT-600‡, CT-1550‡, CT-1551‡
50 500
PV10-8R-L .04 .225 #8 1.05 .31 .31 50 500
PV10-10R-L .04 .225 #10 1.05 .31 .31 50 500
PV10-14R-L .04 .225 1/4" 1.23 .52 .38 50 500
PV10-56R-L .04 .225 5/16" 1.23 .52 .38 50 500
PV10-38R-L .04 .225 3/8" 1.31 .58 .41 50 500
PV10-12R-L .04 .225 1/2" 1.46 .72 .53 50 500
Type PV-R
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). B9
Ring Terminal, Vinyl Expanded Insulation
**To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for abulk package of 500.‡UL and CSA approved tooling/product combinations.
C
L
W
• Insulation support• Brazed seam• For large wire insulation O.D.
**To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for abulk package of 500.‡UL and CSA approved tooling/product combinations.
C
L
W
• Insulation support• Brazed seam
Part NumberWire
RangeColorCode
StockThickness
Max.Ins.
StudSize
Figure Dimensions(In.)
Crimp Tool
Std.Pkg.Qty.**
Std.Ctn.Qty.L W C
PV18-610R-C 22-18AWG
Red .03 .150
#6, #8, #10
1.00 .31 .25
CT-100, CT-600‡,CT-1550‡,CT-1551‡
100 500
PV14-610R-C 16-14AWG
Blue .03 .170 1.00 .31 .25 100 500
PV10-610R-L 12-10AWG
Yellow .04 .225 1.17 .37 .31 50 500
Type PV-RX
Type PV-610R
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
B10 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Ring Terminal TEFZEL* Insulated
*TEFZEL is a registered trademark of E.I. Du Pont De Nemours and Company.‡UL approved tooling/product combinations.
C
L
W
• Insulation grip sleeve• Butted seam with metal sleeve
• For nuclear containment areas and high temperature (to 150°C) applications
• Color code: white with appropriate color stripe
Part NumberWire
RangeColorCode
StockThickness
Max.Ins.
StudSize
Figure Dimensions(In.)
Crimp Tool
Std.Pkg.Qty.
Std.Ctn.Qty.L W C
PT18-4R-C
22-18AWG
RedStripe
.03 .145 #4 .75 .25 .22
CT-100,CT-600‡,CT-1550‡,CT-1551‡
100 500
PT18-6R-C .03 .145 #6 .78 .25 .22 100 500
PT18-8R-C .03 .145 #8 .84 .31 .29 100 500
PT18-10R-C .03 .145 #10 .84 .31 .29 100 500
PT18-14R-C .03 .145 1/4" 1.05 .46 .40 100 500
PT14-4R-C
16-14AWG
BlueStripe
.03 .162 #4 .75 .25 .22
CT-100,CT-600‡,CT-1550‡,CT-1551‡
100 500
PT14-6R-C .03 .162 #6 .84 .31 .29 100 500
PT14-8R-C .03 .162 #8 .84 .31 .29 100 500
PT14-10R-C .03 .162 #10 .84 .31 .29 100 500
PT14-14R-C .03 .162 1/4" 1.05 .46 .40 100 500
PT10-6R-L
12-10AWG
YellowStripe
.04 .225 #6 1.03 .37 .33CT-100,
CT-600‡,CT-1550‡,CT-1551‡
50 500
PT10-8R-L .04 .225 #8 1.03 .37 .33 50 500
PT10-10R-L .04 .225 #10 1.03 .37 .33 50 500
PT10-14R-L .04 .225 1/4" 1.18 .52 .42 50 500
Heat Shrink, Ring Terminal
L
W
• Heat shrink polyolefin with hot melt sealant• Minimum shrink temperature 300°F (150°C)• Brazed seam
• Adhesive lined heat shrink• Heat shrink insulated terminals are both air and water tight
Part NumberWire
RangeColorCode
Max.Ins.
StudSize
FigureDimensions (In.)
WireStrip
Length Crimp Tool
Std.Pkg.Qty.
Std.Ctn.Qty.L W
PH18-6R-Q
22-18AWG
Red
.170 #6 1.05 .25 5/16
CT-310
25 125
PH18-8R-Q .170 #8 1.08 .31 5/16 25 125
PH18-10R-Q .170 #10 1.08 .31 5/16 25 125
PH18-14R-Q .170 1/4" 1.30 .47 5/16 25 125
PH14-6R-Q
16-14AWG
Blue
.190 #6 1.06 .31 5/16
CT-310
25 125
PH14-8R-Q .190 #8 1.03 .31 5/16 25 125
PH14-10R-Q .190 #10 1.12 .31 5/16 25 125
PH14-14R-Q .190 1/4" 1.24 .46 5/16 25 125
PH14-56R-Q .190 5/16" 1.27 .46 5/16 25 125
PH14-38R-Q .190 3/8" 1.26 .53 5/16 25 125
PH10-8R-E
12-10AWG
Yellow
.240 #8 1.22 .37 5/16
CT-310
20 100
PH10-10R-E .240 #10 1.20 .37 5/16 20 100
PH10-14R-E .240 1/4" 1.41 .52 5/16 20 100
PH10-38R-E .240 3/8" 1.45 .59 5/16 20 100
PH10-12R-E .240 1/2" 1.54 .72 5/16 20 100
Type PT-R
Type PH-R
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). B11
Ring Terminal, Heavy Duty, Vinyl Insulated – Funnel Entry
**To order in bulk, replace -L with -D for a bulk package of 500.‡UL and CSA approved tooling/product combinations.
C
L
W
• Insulation support• Brazed seam
Part NumberWire
RangeColorCode
StockThickness
Max.Ins.
StudSize
Figure Dimensions(In.)
Crimp Tool
Std.Pkg.Qty.**
Std.Ctn.Qty.L W C
PV12-6HDR-L
16-12AWG
Yellow
.05 .225 #6 1.05 .31 .35
CT-600‡,CT-1550‡,CT-1551‡
50 500
PV12-8HDR-L .05 .225 #8 1.05 .31 .35 50 500
PV12-10HDR-L .05 .225 #10 1.08 .37 .33 50 500
PV12-14HDR-L .05 .225 1/4" 1.23 .52 .42 50 500
PV12-56HDR-L .05 .225 5/16" 1.23 .52 .42 50 500
PV12-38HDR-L .05 .225 3/8" 1.31 .58 .46 50 500
Expanded InsulationPV12-6HDRX-L
16-12AWG
Yellow
.05 .250 #6 1.08 .31 .33
CT-600‡,CT-1550‡,CT-1551‡
50 500
PV12-8HDRX-L .05 .250 #8 1.08 .31 .33 50 500
PV12-10HDRX-L .05 .250 #10 1.15 .37 .31 50 500
PV12-14HDRX-L .05 .250 1/4" 1.30 .52 .40 50 500
PV12-56HDRX-L .05 .250 5/16" 1.30 .52 .40 50 500
PV12-38HDRX-L .05 .250 3/8" 1.38 .58 .44 50 500
Type PV-HDR
Ring Terminal, Heavy Duty, Nylon Insulated
**To order in bulk, replace -L with -D for a bulk package of 500.‡UL and CSA approved tooling/product combinations.
C
L
W
• Insulation grip sleeve• Manufactured from stock 56% thicker than a standard
#16-14 AWG terminal
• Designed for use in demanding applications such as industrialequipment and electric utilities
• Expanded insulation for large wire insulation O.D.
B12 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Ring Terminal, Large Wire, Vinyl Insulated
**To order in bulk, replace -Q, -E, or -X in the part number with -T for a bulk package of 200.‡UL approved tooling/product combinations.
C
L
W
• Insulation support• #8 through #2 AWG wire sizes,
accommodates heavy duty construction for demanding applications
• Brazed seam
Part NumberWire
RangeColorCode
StockThickness
Max.Ins.
StudSize
Figure Dimensions(In.)
Crimp Tool
Std.Pkg.Qty.**
Std.Ctn.Qty.L W C
PV8-8R-Q
8 AWG Red
.04 .280 #8 1.51 .42 .43
CT-720,CD-720PV8-2‡
25 250
PV8-10R-Q .04 .280 #10 1.53 .47 .43 25 250
PV8-14R-Q .04 .280 1/4" 1.53 .47 .43 25 250
PV8-56R-Q .04 .280 5/16" 1.64 .59 .49 25 250
PV8-38R-Q .04 .280 3/8" 1.64 .59 .51 25 250
PV8-12R-Q .04 .280 1/2" 1.74 .82 .54 25 250
PV6-8R-E
6 AWG Blue
.05 .340 #8 1.61 .47 .43
CT-720,CD-720PV8-2‡
20 200
PV6-10R-E .05 .340 #10 1.62 .47 .43 20 200
PV6-14R-E .05 .340 1/4" 1.65 .47 .48 20 200
PV6-56R-E .05 .340 5/16" 1.74 .62 .53 20 200
PV6-38R-E .05 .340 3/8" 1.74 .62 .51 20 200
PV6-12R-E .05 .340 1/2" 1.84 .82 .51 20 200
PV4-10R-E
4 AWG Yellow
.05 .450 #10 1.88 .55 .50
CT-720,CD-720PV8-2‡
20 200
PV4-14R-E .05 .450 1/4" 1.88 .55 .50 20 200
PV4-56R-E .05 .450 5/16" 1.95 .68 .50 20 200
PV4-38R-E .05 .450 3/8" 1.95 .68 .50 20 200
PV4-12R-E .05 .450 1/2" 2.04 .86 .50 20 200
PV2-10R-X
2 AWG Red
.06 .560 #10 1.96 .68 .58
CT-720,CD-720PV8-2‡
10 100
PV2-14R-X .06 .560 1/4" 1.96 .68 .58 10 100
PV2-56R-X .06 .560 5/16" 1.96 .68 .58 10 100
PV2-38R-X .06 .560 3/8" 1.96 .68 .58 10 100
PV2-12R-X .06 .560 1/2" 2.05 .86 .58 10 100
Ring Terminal, Large Wire, Vinyl Expanded Insulation
**To order in bulk, replace -Q, -E, or -X in the part number with -T for a bulk package of 200.‡UL approved tooling/product combinations.
C
L
W
• Insulation support• Brazed seam• For large wire insulation O.D. Part Number
WireRange
ColorCode
StockThickness
Max.Ins.
StudSize
Figure Dimensions(In.)
Crimp Tool
Std.Pkg.Qty.**
Std.Ctn.Qty.L W C
PV8-8RX-Q
8 AWG Red
.04 .360 #8 1.50 .42 .43
CT-720,CD-720PV8-2‡
25 250
PV8-10RX-Q .04 .360 #10 1.52 .47 .43 25 250
PV8-14RX-Q .04 .360 1/4" 1.52 .47 .43 25 250
PV8-56RX-Q .04 .360 5/16" 1.62 .59 .51 25 250
PV8-38RX-Q .04 .360 3/8" 1.62 .59 .51 25 250
PV8-12RX-Q .04 .360 1/2" 1.74 .82 .51 25 250
PV6-8RX-E
6 AWG Blue
.05 .436 #8 1.61 .47 .43
CT-720,CD-720PV8-2‡
20 200
PV6-10RX-E .05 .436 #10 1.61 .47 .43 20 200
PV6-14RX-E .05 .436 1/4" 1.61 .47 .43 20 200
PV6-56RX-E .05 .436 5/16" 1.73 .62 .51 20 200
PV6-38RX-E .05 .436 3/8" 1.73 .62 .53 20 200
PV6-12RX-E .05 .436 1/2" 1.83 .82 .53 20 200
PV4-10RX-E
4 AWG Yellow
.05 .515 #10 1.87 .55 .53
CT-720,CD-720PV8-2‡
20 200
PV4-14RX-E .05 .515 1/4" 1.87 .55 .53 20 200
PV4-56RX-E .05 .515 5/16" 1.94 .68 .53 20 200
PV4-38RX-E .05 .515 3/8" 1.94 .68 .53 20 200
PV4-12RX-E .05 .515 1/2" 2.03 .86 .53 20 200
PV2-10RX-X
2 AWG Red
.06 .610 #10 1.95 .68 .57
CT-720,CD-720PV8-2‡
10 100
PV2-14RX-X .06 .610 1/4" 1.93 .68 .57 10 100
PV2-56RX-X .06 .610 5/16" 1.93 .68 .57 10 100
PV2-38RX-X .06 .610 3/8" 1.94 .69 .57 10 100
PV2-12RX-X .06 .610 1/2" 2.20 .86 .57 10 100
Type PV-R
Type PV-RX
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). B13
Ring Terminal, Non-Insulated
*Wire sizes #26-22 AWG, are not UL Listed or CSA Certified.**To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for abulk package of 500.‡UL and CSA approved tooling/product combinations.
C
L
W
• Brazed seam• Beveled wire lead-in
Part NumberWire
RangeStock
Thickness Stud Size
Figure Dimensions (In.)
Crimp Tool
Std.Pkg.Qty.**
Std.Ctn.Qty.L W C
P22-2R-C*
26-22AWG
.02 #2 .52 .20 .16
CT-100, CT-200
100 1000
P22-4R-C* .02 #4 .52 .20 .16 100 1000
P22-6R-C* .02 #6 .52 .20 .16 100 1000
P22-8R-C* .02 #8 .63 .26 .25 100 1000
P22-10R-C* .02 #10 .63 .31 .22 100 1000
P18-4R-C
22-18AWG
.03 #4 .62 .25 .21
CT-100‡, CT-200‡,CT-600‡, CT-1570‡
100 1000
P18-6RN-C .03 #6 .62 .22 .19 100 1000
P18-6R-C .03 #6 .62 .25 .21 100 1000
P18-8R-C .03 #8 .71 .31 .25 100 1000
P18-10R-C .03 #10 .71 .31 .25 100 1000
P18-12R-C .03 1/2" 1.20 .72 .53 100 1000
P18-14R-C .03 1/4" .91 .46 .38 100 1000
P18-56R-C .03 5/16" .91 .46 .38 100 1000
P18-38R-C .03 3/8" 1.0 .53 .43 100 1000
P14-4R-C
16-14AWG
.03 #4 .62 .25 .20
CT-100‡, CT-200‡,CT-600‡, CT-1570‡
100 1000
P14-6R-C .03 #6 .62 .25 .20 100 1000
P14-8R-C .03 #8 .71 .31 .25 100 1000
P14-10R-C .03 #10 .71 .31 .25 100 1000
P14-12R-L .03 1/2" 1.20 .72 .53 50 500
P14-14R-C .03 1/4" .91 .46 .38 100 1000
P14-56R-C .03 5/16" .91 .46 .38 100 1000
P14-38R-C .03 3/8" 1.0 .53 .43 100 1000
P10-6R-L
12-10AWG
.04 #6 .78 .31 .31
CT-100‡, CT-200‡,CT-600‡, CT-1570‡
50 500
P10-8R-L .04 #8 .78 .31 .31 50 500
P10-10R-L .04 #10 .81 .38 .31 50 500
P10-12R-L .04 1/2" 1.20 .72 .53 50 500
P10-14R-L .04 1/4" .96 .52 .38 50 500
P10-56R-L .04 5/16" .96 .52 .38 50 500
P10-38R-L .04 3/8" 1.04 .58 .44 50 500
Type P-R
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
B14 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Multiple Stud Terminal, Non-Insulated
**To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for abulk package of 500.‡UL and CSA approved tooling/product combinations.
C
L
W
• Brazed seam• Single terminal for #6, #8, and #10
size studs Part NumberWire
RangeStock
Thickness Stud Size
Figure Dimensions (In.)
Crimp Tool
Std.Pkg.Qty.**
Std.Ctn.Qty.L W C
P18-610R-C 22-18AWG
.03
#6, #8, #10
.80 .31 .25
CT-100‡, CT-200‡,CT-600‡, CT-1570‡
100 500
P14-610R-C 16-14AWG
.03 .80 .31 .25 100 500
P10-610R-L 12-10AWG
.04 .90 .37 .31 50 500
Ring Terminal, Non-Insulated – High Temperature
**To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for abulk package of 500.C
L
W
• Nickel plated copper• Brazed seam
• Beveled wire lead-in• For temperatures up to 650°F (343°C)
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). B17
Fork Terminal, Nylon Insulated
*Wire sizes #26-22 AWG, are not UL Listed or CSA Certified.**To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for abulk package of 500.‡UL and CSA approved tooling/product combinations.
**To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for abulk package of 500.‡UL and CSA approved tooling/product combinations.
B18 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Fork Terminal, Vinyl Insulated – Funnel Entry
*Wire sizes #26-22 AWG, are not UL Listed or CSA Certified.**To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for abulk package of 500.‡UL and CSA approved tooling/product combinations.
**To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for abulk package of 500.‡UL and CSA approved tooling/product combinations.
• For large wire insulation O.D.• Insulation support• Brazed seam Part Number
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). B19
Locking Fork Terminal, Nylon Insulated
**To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for abulk package of 500.‡UL and CSA approved tooling/product combinations.
**To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for abulk package of 500.‡UL and CSA approved tooling/product combinations.
**To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for abulk package of 500.‡UL and CSA approved tooling/product combinations.
**To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for abulk package of 500.‡UL and CSA approved tooling/product combinations.
• Insulation support• For large wire insulation O.D.• Brazed seam
C
L
W
Type PV-LF
Type PV-LFX
C
L
W
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). B21
Short Locking Fork Terminal, Nylon Insulated
**To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for abulk package of 500.
C
L
W
• Insulation grip sleeve
Part NumberWire
RangeColorCode
StockThickness
Max.Ins.
StudSize
Figure Dimensions(In.)
Crimp Tool
Std.Pkg.Qty.**
Std.Ctn.Qty.L W C
PN18-5SLF-C
22-18AWG
Red
.03 .145 #5 .75 .26 .09
CT-1550, CT-1551
100 500
PN18-6SLF-C .03 .145 #6 .75 .27 .19 100 500
PN18-8SLF-C .03 .145 #8 .80 .29 .23 100 500
PN18-10SLF-C .03 .145 #10 .81 .33 .23 100 500
PN14-5SLF-C
16-14AWG
Blue
.03 .162 #5 .75 .25 .19
CT-1550,CT-1551
100 500
PN14-6SLF-C .03 .162 #6 .75 .25 .19 100 500
PN14-8SLF-C .03 .162 #8 .82 .29 .23 100 500
PN14-10SLF-C .03 .162 #10 .81 .33 .23 100 500
PN14-14SLF-C .03 .162 1/4" .90 .44 .28 100 500
PN10-5SLF-L
12-10AWG
Yellow
.04 .225 #5 .84 .25 .22
CT-1550, CT-1551
50 500
PN10-6SLF-L .04 .225 #6 .84 .25 .22 50 500
PN10-8SLF-L .04 .225 #8 .89 .29 .26 50 500
PN10-10SLF-L .04 .225 #10 .90 .33 .26 50 500
PN10-14SLF-L .04 .225 1/4" .99 .45 .33 50 500
Short Locking Fork Terminal, Nylon Insulated – Funnel Entry
**To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for abulk package of 500.C
L
W
• Insulation grip sleeve
Part NumberWire
RangeColorCode
StockThickness
Max.Ins.
StudSize
Figure Dimensions(In.)
Crimp Tool
Std.Pkg.Qty.**
Std.Ctn.Qty.L W C
PNF18-5SLF-C
22-18AWG
Red
.03 .145 #5 .75 .26 .19
CT-1550, CT-1551
100 500
PNF18-6SLF-C .03 .145 #6 .75 .27 .19 100 500
PNF18-8SLF-C .03 .145 #8 .80 .29 .23 100 500
PNF18-10SLF-C .03 .145 #10 .81 .33 .23 100 500
PNF14-5SLF-C
16-14AWG
Blue
.03 .162 #5 .75 .25 .22
CT-1550, CT-1551
100 500
PNF14-6SLF-C .03 .162 #6 .75 .25 .22 100 500
PNF14-8SLF-C .03 .162 #8 .82 .29 .26 100 500
PNF14-10SLF-C .03 .162 #10 .81 .33 .25 100 500
PNF14-14SLF-C .03 .162 1/4" .91 .44 .30 100 500
PNF10-6SLF-L
12-10AWG
Yellow
.04 .225 #6 .90 .25 .17
CT-1550, CT-1551
50 500
PNF10-8SLF-L .04 .225 #8 .95 .29 .22 50 500
PNF10-10SLF-L .04 .225 #10 .96 .33 .22 50 500
PNF10-14SLF-L .04 .225 1/4" 1.06 .45 .28 50 500
Type PN-SLF
Type PNF-SLF
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
B22 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Short Locking Fork Terminal, Vinyl Insulated – Funnel Entry
**To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for abulk package of 500.
C
L
W
C
L
W
• Insulation support• Butted seam
Part NumberWire
RangeColorCode
StockThickness
Max.Ins.
StudSize
Figure Dimensions(In.)
Crimp Tool
Std.Pkg.Qty.**
Std.Ctn.Qty.L W C
PV18-5SLF-C
22-18AWG
Red
.03 .150 #5 .82 .26 .19
CT-1550, CT-1551
100 1000
PV18-6SLF-C .03 .150 #6 .82 .27 .19 100 1000
PV18-8SLF-C .03 .150 #8 .87 .29 .23 100 1000
PV18-10SLF-C .03 .150 #10 .88 .33 .23 100 1000
PV14-5SLF-C
16-14AWG
Blue
.03 .170 #5 .82 .25 .20
CT-1550, CT-1551
100 1000
PV14-6SLF-C .03 .170 #6 .82 .25 .20 100 1000
PV14-8SLF-C .03 .170 #8 .89 .29 .23 100 1000
PV14-10SLF-C .03 .170 #10 .89 .33 .23 100 1000
PV14-14SLF-C .03 .170 1/4" .97 .44 .33 100 1000
PV10-5SLF-L
12-10AWG
Yellow
.04 .225 #5 .86 .25 .22
CT-1550, CT-1551
50 500
PV10-6SLF-L .04 .225 #6 .87 .25 .22 50 500
PV10-8SLF-L .04 .225 #8 .92 .29 .26 50 500
PV10-10SLF-L .04 .225 #10 .92 .33 .26 50 500
PV10-14SLF-L .04 .225 1/4" 1.02 .45 .33 50 500
Flanged Fork Terminal, Nylon Insulated
**To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for abulk package of 500.‡UL and CSA approved tooling/product combinations.
• Insulation grip sleeve• For use in vibration applications
**To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for abulk package of 500.‡UL and CSA approved tooling/product combinations.
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). B23
Fork Terminal, Non-Insulated
*Wire sizes #26-22 AWG, are not UL Listed or CSA Certified.**To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for abulk package of 500.‡UL and CSA approved tooling/product combinations.
**To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for abulk package of 500.‡UL and CSA approved tooling/product combinations.
B24 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Locking Fork Terminal, Non-Insulated
**To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for abulk package of 500.‡UL and CSA approved tooling/product combinations.
**To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for abulk package of 500.‡UL and CSA approved tooling/product combinations.C
• Brazed seam• Beveled wire lead-in• For pin type terminal blocks
Type PM-F
Type PMV-P
Type PM-P
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
B30 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Plastic Box Terminal Kits
• Ideal for maintenance and construction wiring• Rugged plastic construction
• Kit has hanging tab for easy storage
KP-1075
KP-1165
Part Number Part Description
Std.Pkg.Qty.
KP-1075 Terminal kit without crimping tool. Includes the following: (20) PV18-8R; PV18-6F;PV14-8F; PV14-10R; (10) PV10-8R; PV10-10R; DNF14-250; DNF-18-250; BSV18X;BSV14X; BSV10X; (5) JN418-212.
1
KP-1000 Empty plastic box12 terminal compartments and 1 tool compartment, measures11" wide x 6 3/4" deep x 1 3/4" high:• Positive latch prevents accidental opening• Once top is closed, terminals remain in their compartments
• Terminal kit in rugged steel case that can beused stand-alone or fits into 2, 4 or 6 drawerslide racks
K-1102
Part Number Part Description
Std.Pkg.Qty.
K-1000 Empty steel box, 20 terminal compartments and 1 tool compartment, measures13 21/64" wide x 9 21/64" deep x 2" high:• Latch prevents accidental opening• Handle for portability or as drawer pull when used in rack• Drop-in label area on front
1
K-1001 Empty steel kit box, 20 terminal compartments and 1 tool compartment,box measures 13 21/64" wide x 9 21/64" deep x 2" high.
1
K-1100 Steel box and CT-100 Crimping Tool. 1
K-1102 Includes the following: (100) PV18-6LF; PV18-8LF; PV14-8LF; PV14-10LF; BSV18X;BSV14X; (50) PV10-10LF; BSV10X; (1) CT-100 Tool; K-1000 Box.
1
K-1103 Includes the following: (100) DV18-250B; DV14-250B; DV14-250MB; D18-250;D14-250; (50) DV10-250; D10-250; (1) CT-100 Tool; K-1000 Box.
SR2 2-drawer slide rack to hold K-1000 series terminal kit. 1
SR4 4-drawer slide rack to hold K-1000 series terminal kit. 1
SR6 6-drawer slide rack to hold K-1000 series terminal kit. 1
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
B32
Index
NOTES
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). C1
PPAANN--TTEERRMM ® DDIISSCCOONNNNEECCTTSS
PANDUIT ® PAN-TERM ® Disconnects are designed and precision made to function as a reliablemethod of making quick, repeatable interconnections. Available with nylon, premium nylon orvinyl insulation or non-insulated.
• Fully insulated design provides excellentprotection from electrical shorts and providesadditional installer protection for safety fromelectrical shocks
• Funnel entry speeds insertion and minimizesturned back wire strands
• Integrated metal insulation grip provides doublecrimp insulation grip for high vibration orconductor strain environments on select SUPRA-GRIP ™ disconnects and DISCO-LOK ™ disconnectsand DISCO-GRIP ™ disconnects
• Applicable sizes are UL Listed and CSA Certified,as noted
• Wide assortment of manual, controlled cycle,battery operated hydraulic and pneumaticcrimping tools for reliable connections at thelowest installed cost
PANDUIT ® continually provides new designs to meet the application challenges encountered byour customers. PANDUIT ® offers a wide assortment of PAN-TERM ® termination products at thelowest installed cost.
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
C2
Index
Features and Benefits — PAN-TERM ® DisconnectsPAN-TERM ® disconnects are fabricated from brass and are electro-tin plated for a long, corrosion resistant operating life.
Nylon Fully Insulated Female Receptacles and Male Tabs
Type DNF-FIB
DISCO-GRIP ™ Premium Nylon Fully InsulatedFemale Receptacles and Male Tabs
DPF18-250FIM-C 22-18 AWG Red .133 .90 .41 .29 .250 x .032
CT-600,CT-1525
100 1000
DPF14-250FIM-C 16-14 AWG Blue .156 .90 .41 .29 .250 x .032 100 1000
DPF18-250FIMB-L* 22-18 AWG Red .133 .92 .46 .34 .250 x .032 50 500
DPF14-250FIMB-L* 16-14 AWG Blue .156 .92 .46 .34 .250 x .032 50 500
L H
W
*Oversized housing design will mate with receptacles up to .390" wide and .235" (.285" high for parts with orientation bump).**To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for a bulk package of 500.
‡UL and CSA approved tooling/product combinations.**To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for a bulk package of 500.
• Insulation grip• Internal wire stop
HL
W
**To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for a bulk package of 500.
Type DNF-FI
Type DPF-FIM
Type DPF-FIB
Part Number Wire RangeColorCode
Max.Ins.
Figure Dimensions(In.)
Tab Size Crimp Tool
Std.Pkg.Qty.**
Std.Ctn.Qty.L W H
DPF18-110FIB-C
22-18 AWG Red
.133 .71 .19 .16 .110 x .032
CT-600‡,CT-1525‡
100 1000DPF18-111FIB-C .133 .71 .19 .16 .110 x .020 100 1000DPF18-205FIB-C .133 .78 .31 .22 .205/.187 x .032 100 1000DPF18-206FIB-C .133 .78 .31 .22 .205/.187 x .020 100 1000DPF18-250FIB-C .133 .84 .35 .22 .250 x .032 100 1000DPF14-205FIB-C
16-14 AWG Blue
.156 .78 .31 .22 .205/.187 x .032CT-600‡,CT-1525‡
100 1000DPF14-206FIB-C .156 .78 .31 .22 .205/.187 x .020 100 1000DPF14-250FIB-C .156 .84 .35 .22 .250 x .032 100 1000DPF10-250FI-L
12-10 AWG Yellow
.218 .95 .36 .27 .250 x .032 CT-460‡,CT-600‡,
CT-1525‡,CT-1551
50 500
DPF10-250FIB-L .218 .95 .36 .23 .250 x .032 50 500
‡UL and CSA approved tooling/product combinations.*Not UL Listed or CSA Certified.**To order in bulk, replace -C in the part number with -M for a bulk package of 1000.
Part NumberWire
RangeColorCode
Max.Ins.
Figure Dimensions(In.)
Tab Size Crimp Tool
Std.Pkg.Qty.**
Std.Ctn.Qty.L W H
DNF18-110-C
22-18AWG
Red
.100 .69 .15 .08 .110 x .032
CT-600‡,CT-1525‡
100 500DNF18-111-C .100 .69 .15 .07 .110 x .020 100 500DNF18-187-C .137 .76 .23 .10 .187 x .032 100 500DNF18-188-C .137 .76 .23 .10 .187 x .020 100 500DNF18-205-C .137 .76 .25 .12 .205/.187 x .032 100 500DNF18-206-C .137 .76 .25 .12 .205/.187 x .020 100 500DNF18-250-C .138 .81 .29 .12 .250 x .032 100 500DNF14-110-C*
16-14AWG
Blue
.162 .75 .15 .08 .110 x .032CT-1525
100 500DNF14-111-C* .162 .75 .15 .07 .110 x .020 100 500DNF14-187-C .162 .76 .23 .10 .187 x .032
CT-600‡,CT-1550,CT-1551
100 500DNF14-188-C .162 .76 .23 .10 .187 x .020 100 500DNF14-205-C .162 .76 .25 .12 .205/.187 x .032 100 500DNF14-206-C .162 .76 .25 .12 .205/.187 x .020 100 500DNF14-250-C .162 .83 .29 .12 .250 x .032 100 500
T E R M I N A T I O N S O L U T I O N S
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). C9
▲ RECOGNIZED
Female Disconnect, Non-Insulated – Metal Sleeve
‡UL and CSA approved tooling/product combinations.**To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for
a bulk package of 500.
• Sleeved barrel
L
W
H
Female Disconnect, Non-Insulated – Butted Seam
• Butted seam
L
W
H
**To order in bulk, replace -C in the part number with -M for a bulk package of 1000.
Part NumberWire
Range
Figure Dimensions(In.)
Tab Size Crimp Tool
Std.Pkg.Qty.**
Std.Ctn.Qty.L W H
D18-187-C22-18 AWG
.58 .23 .10 .187 x .032 CT-100‡, CT-200‡, CT-1570‡
100 500D18-188-C .58 .23 .10 .187 x .020 100 500D18-250-C .66 .30 .12 .250 x .032 100 500
▲ D14-187-C16-14 AWG
.58 .23 .10 .187 x .032CT-100, CT-200, CT-600, CT-1570
**To order in bulk, replace -C in the part number with -M for a bulk package of 1000.
**To order in bulk, replace -C in the part number with -M for a bulk package of 1000.
‡UL and CSA approved tooling/product combinations.**To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D
DMNF2-63M-C 1.5-2.5 Blue 4.32 23.6 6.3 x .8 100 500
DMNF6-63M-L 2.5-6.0 Yellow 5.84 23.6 6.3 x .8 50 250
Part Number Wire RangeColorCode Max. Ins.
FigureDimensions (mm) Tab
Size Tool
Std.Pkg.Qty.
Std.Ctn.Qty.L
DM1-63M-C .5-1.5 — — 19.2 6.3 x .8
CT-1570
100 500
DM2-63M-C 1.5-2.5 — — 19.2 6.3 x .8 100 500
DM6-63M-L 2.5-6.0 — — 18.2 6.3 x .8 50 250
Part Number Wire RangeColorCode Max. Ins.
FigureDimensions (mm) Tab
Size Tool
Std.Pkg.Qty.
Std.Ctn.Qty.L W
DMV1-63P-C .5-1.5 Red 3.68 22.4 7.4 6.3 x .8CT-1551
100 500
DMV2-63P-C 1.5-2.5 Blue 4.06 22.4 7.4 6.3 x .8 100 500
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). D1
PPAANN--TTEERRMM ® SSPPLLIICCEESS
PANDUIT ® PAN-TERM ® Splices are designed and manufactured for fast assembly, and long reliableperformance. As the demand for splices increases, it becomes essential to provide a completesystem for termination products. We provide an extensive line of tooling designed specifically toprovide optimum performance when used as a system for terminating.
• Suitable for in-line, parallel and group splicingof wires
• Nylon and vinyl insulated as well as non-insulated
• Available in sizes from #26 AWG – #10 AWG
• Internal wire stops on butt splices prevent overinsertion of wires
• Applicable sizes are UL Listed and CSA Certified,as noted
• Wide assortment of manual, controlled cycle,battery operated hydraulic and pneumaticcrimping tools for reliable connections at thelowest installed cost
PANDUIT ® continually provides new designs to meet the application challenges encountered byour customers. PANDUIT ® offers a wide assortment of PAN-TERM ® termination products to meetcustomer needs at the lowest installed cost.
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
D2 Order number of pieces required, in multiples of Standard Package Quantity.
Index
Features and Benefits — PAN-TERM ® Splices and Wire Joints
Nylon Parallel Splices
Only onecrimp neededto completesplice
Non-Insulated Parallel Splices
Maximum insulationtemperature 105°C(221°F)
Maximum recommended operatingtemperature150°C (302°F)
*Part number BSN22-C, is not UL Listed.**To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for a
bulk package of 500.
**To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for abulk package of 500.
*Part number BS22-C, is not UL Listed.**To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for a
D6 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Wire Joint, Nylon Insulated
*Part number JN314-412, is not UL Listed.**To order in bulk, replace -C in the part number with -M for a bulk package of 1000.▲Part number JN218-216-C, is not CSA Certified.‡UL and CSA approved tooling/product combinations.
• Wire joints are used to crimp groups of wires • Fully pre-insulated to prevent shorting and shocks
▲*Part number J216-410, is not UL Listed or CSA Certified.**To order in bulk, replace -T in the part number with -2M for a bulk package of 2000 and replace -L with -D
for a bulk package of 500.‡UL and CSA approved tooling/product combinations.
• Non-insulated
* ▲
L
Part NumberWire
RangeColorCode
CMA RangeFigure Dim.
(In.) Wire StripLength Crimp Tool
Std.Pkg.Qty.**
Std.Ctn.Qty.Min. Max. L
J214-312-T 2 #14 - 3#12
— 5760 19590 .37 1/2 CT-100‡, CT-200‡ 200 2000
J318-412-T 3 #18 - 4#12
— 4860 27330 .37 1/2 CT-100‡, CT-200‡ 200 2000
J216-410-L** 2 #16 - 4#10
— 5160 41600 .62 3/4 CT-100‡, CT-200‡ 50 500
Type J
▲
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
D8 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
PANDUIT ® PAN-TERM ® Ferrule end sleeves terminate stranded wire into terminal blocks with superior termination performance. A wide assortment of ferrule styles and tool designs providea proven way to make reliable connections, especially for limited space applications. Insulationflare allows for ease of wire insertion and eliminates loose strands of wire. Encapsulated crimpcontains loose wires to eliminate stray wire breakage.
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). E1
PPAANN--TTEERRMM ® FFEERRRRUULLEESS
PANDUIT ® continually provides new designs to meet the application challenges encountered by ourcustomers. PANDUIT ® offers a wide assortment of PAN-TERM ® termination products to meet customerneeds at the lowest installed cost.
• Insulated single wire range of #26 – #1 AWG, sizes meetsFrench and DIN color code standards
• Insulated twin wire end sleeve range of #22 – #10 AWG,sizes meets DIN color code standard
• Non-insulated wire range of #24 – #1 AWG
• Ideal for control panel and terminal block applications
• Wide assortment of manual, controlled cycle, batteryoperated hydraulic and pneumatic crimping tools forreliable connections at the lowest installed cost
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
E2 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Features and Benefits — PAN-TERM ® Ferrules
D = DIN
F = French
S = Single
T = Twin
Blank = Non-Insulated
PANDUIT ® Ferrules are available for wiring applications from #26 AWG to #1 AWG. Offerings include insulated and non-insulated ferrules,in single-wire or double-wire configurations. Insulated ferrules are color coded to DIN or French standards.
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). E3
Selection Guide — PAN-TERM ® Ferrules
Ferrules, Single Wire DIN Color Code FSD Pg. E4Ferrules, Single Wire French Color Code FSF Pg. E5Ferrules, Twin Wire DIN Color Code FTD Pg. E6
Polypropelene
Ferrules
Non-Insulated Ferrules Seamless Tube F Pg. E6, E7
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
E4 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Insulated Ferrules – Single Wire DIN End Sleeve
• Ease of wire insertion eliminates loose strands of wire• Wire strands will not fray or spread• No unwanted contacts when installing or removing the wire
• Maximizes a reliable electrical connection• Encapsulated crimp eliminates stray wire breakage• Great for limited space applications
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). E5
Insulated Ferrules – Single Wire French End Sleeve
• Ease of wire insertion eliminates loose strands of wire• Wire strands will not fray or spread• No unwanted contacts when installing or removing the wire
• Maximizes a reliable electrical connection• Encapsulated crimp eliminates stray wire breakage• Great for limited space applications
E6 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
OD
L
P
ID
L
ID OD
Insulated Ferrules – Twin Wire DIN End Sleeve
• Ease of wire insertion eliminates loose strands of wire• Wire strands will not fray or spread• No unwanted contacts when installing or removing the wire
• Maximizes a reliable electrical connection• Encapsulated crimp eliminates stray wire breakage• Great for limited space applications
• Ease of wire insertion eliminates loose strands of wire• Wire strands will not fray or spread• No unwanted contacts when installing or removing the wire
• Maximizes a reliable electrical connection• Encapsulated crimp eliminates stray wire breakage• Great for limited space applications
E8 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Ferrule Assortment Kits
Ferrule kits do not include crimping tool.
KP-F1 and KP-F2
Part Number Part Description
Std.Pkg.Qty.
KP-FSD1 Ferrule kit includes: #24 – #18 AWG Insulated DIN Ferrules. Case includes:30 pieces each of FSD73-6, FSD74-6, FSD75-8, FSD76-8 and FSD77-8.
1
KP-FSD2 Ferrule kit includes: #22 – #14 AWG Insulated DIN ferrules. Case includes:100 pieces each of FSD76-8, FSD77-8, FSD78-8, 50 pieces each of FSD75-8 and FSD80-8.
1
KP-FSD3 Ferrule kit includes: #12 – #6 AWG Insulated DIN Ferrules. Case includes:50 pieces of FSD81-10, 20 pieces each of FSD82-12 and FSD83-12, 10 pieces of FSD84-12.
1
KP-F1 Ferrule kit includes: #22 – #14 AWG Non-Insulated Ferrules. Case includes:500 pieces of F75-6, 400 pieces each of F76-6 and F77-6, 300 pieces of F78-7, 200 pieces of F80-7.
1
KP-F2 Ferrule kit includes: #12 – #6 AWG Non-Insulated Ferrules. Case includes:150 pieces of F81-9, 100 pieces of F82-10, 80 pieces of F83-12, 40 pieces of F84-12.
1
KP-FSD1, KP-FSD2 andKP-FSD3
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F1
PANDUIT ® PAN-LUG ™ Compression Connectors provide permanent terminations for a variety ofpower and grounding applications, with innovation, highest reliability and lowest installed cost.PANDUIT ® offers the first and only copper compression lugs and splices that meet NetworkEquipment-Building Systems (NEBS) Level 3 requirements as tested by Telcordia Technologies.NEBS Level 3 assures that product performance is suitable for equipment applications thatdemand minimal service interruptions over the life span of the equipment.
• Functional product information is marked directlyon the connector, facilitating the identification,ordering and usage of the compression connector
• Color coded to facilitate quick identification of theproper crimp die
• Made from high strength, high conductivityelectrolytic copper and aluminum alloy materials toprovide optimum connectivity for power andgrounding applications
• UL Listed or Recognized, CSA Certified and tested byTelecordia — meets NEBS Level 3, as noted
• Terminations using PANDUIT ® PAN-LUG ™ CompressionConnectors are also UL Listed and CSA Certified withspecified competitor tools
• Wide assortment of manual, controlled cycle,battery operated hydraulic and pneumatic crimping tools for reliable connections at thelowest installed cost
PANDUIT ® PAN-LUG ™ Compression Connectors are designed for use with many different code andflex conductor types and are available in a broad range of styles and sizes including copper one-hole, two-hole and blank tongue lugs and splices; aluminum one-hole and two-hole lugsand splices; copper CTAP style taps; copper in-line reducing splices; and innovative copper HTAPswith snap-on clear covers. PANDUIT ® offers a wide assortment of PAN-LUG ™ Power andGrounding Connectors to meet customer needs and today’s application requirements.
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
T E R M I N A T I O N S O L U T I O N S
Code
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
F4
Index
2 Stud Hole Lugs
Selection Guide — PAN-LUG ™ Copper CompressionConnectors for Copper Code and /or Flex Conductor
1 Stud Hole Lugs
Long Barrel withInspection Window
Code & Flex
Standard Barrel withInspection Window
Code & Flex
Standard Barrelwith Inspection
Window and FlaredEntry Flex
Long Barrel withInspection Window
Code & Flex
Reducing Spliceswith Inspection
Window Code & Flex
HTAPsCode & Flex
LCAX Pg. F64 ,F65LCAX-H 45° bent Pg. F66, F67LCAX-F 90° bent Pg. F68, F69LCAXN narrow tongue Pg. F70LCAXN-H 45° bent narrow tongue Pg. F71LCAXN-F 90° bent narrow tongue Pg. F72
LCAF Pg. F73, F74LCAF-H 45° bent Pg. F75, F76LCAF-F 90° bent Pg. F77, F78
LCDX Pg. F82, F83LCDX-H 45° bent Pg. F84, F85LCDX-F 90° bent Pg. F86, F87LCDXN narrow tongue Pg. F88LCDXN-H 45° bent narrow tongue Pg. F89LCDXN-F 90° bent narrow tongue Pg. F90
LCCF Pg. F95, F96LCCF-H 45° bent Pg. F97, F98LCCF-F 90° bent Pg. F99, F100
LCBX Pg. F79LCBX-H 45° bent Pg. F80LCBX-F 90° bent Pg. F81
LCCX Pg. F91, F92LCCX-H 45° bent Pg. F92, F93LCCX-F 90° bent Pg. F94, F95
HTWC kits with HTAPs and clear covers Pg. F107HTCT Taps Pg. F108CLRCVR clear covers for HTCT taps Pg. F109
RSCK kits with reducing splice and clear heat shrink Pg. F102,F103RSC reducing splices Pg. F104
SCSF Pg. F101
Long Barrel noInspection WindowFlared Entry Flex
Standard Barrel withInspection Window
Code & Flex
Butt Spliceswith Flared Entry Flex
T E R M I N A T I O N S O L U T I O N S
Code Flex
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
F5
Selection Guide — PAN-LUG ™ Aluminum Compression Connectors for Aluminum or Copper Code Conductor
1 Hole Lugs
2 Hole Lugs
Butt Splices
Reducing Splices
Bi-Metallic PinConnectors
for AluminumConductors Only
HTAP Taps
JointCompounds
Belleville Washers
LAA Pg. F113
LAB Pg. F114
SA Pg. F115
SAR Pg. F116
BPC Pg. F117
CW Pg. F115, H33
CMP Pg. F118
HTAP Pg. F118TAPC black cover for HTAP taps Pg. F106
Part Number System for PAN-LUG ™ Compression Lugs
2/0 — —38 D F X
ConductorSize
Stud HoleSize
Two StudHole Spacing
TongueAngle
Std. Pkg. Size
LCD
Type
10 = #10
14 = 1/4"
56 = 5/16"
38 = 3/8"
12 = 1/2"
58 = 5/8"
34 = 3/4"
78 = 7/8"
00 = Blank Tongue*
1 = 1
2 = 2
3 = 3
5 = 5
6 = 6
X = 10
E = 20
Q = 25
L = 50
A = .625"
B = .750"
C = .875"
D = 1.0"
E = 1.25"
G = 1.5"
J = .5"
K = 2"
M = 1.375"
P = .688"
Q = 1.125"
No Letter = 1.75"
H = 45° Angle
F = 90° Angle
No Letter = Straight
Ex: LCD Lug, Copper TwoHole Standard Barrel
* LCA, LCCand LCD
styles only
T E R M I N A T I O N S O L U T I O N S
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
F6 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Code Conductor, One-Hole, Short Barrel with Window Lug
• Short barrel for limited space applications• Color coded barrels marked with PANDUIT ® and specified
competitor die index numbers for proper crimp die selection• Inspection window to visually assure full conductor insertion• Tin plated to inhibit corrosion
• UL Listed for use up to 35KV**, temperature rated 90°C and CSACertified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F7
LTBW
Std.Pkg.Qty.
Wire StripLength
(In.)
T&B DieIndex No.‡
Burndy DieIndex No.‡
PANDUIT ®
Die IndexNo.‡
PANDUIT ®
Color Code
Figure Dimensions (In.)Stud Hole
Size(In.)
CopperConductor
SizePart Number
‡See pages L6, L7 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.
Code Conductor, One-Hole, Short Barrel with Window Lug (continued)
F8 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Code Conductor, One-Hole, Short Barrel with Window Lug, 45° Angle
• Short barrel for limited space applications• Color coded barrels marked with PANDUIT ® and specified
competitor die index numbers for proper crimp die selection• Inspection window to visually assure full conductor insertion• Tin plated to inhibit corrosion
• UL Listed for use up to 35KV**, temperature rated 90°C and CSACertified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F9
LTBW
Std.Pkg.Qty.
Wire StripLength
(In.)
T&B DieIndex No.‡
Burndy DieIndex No.‡
PANDUIT ®
Die IndexNo.‡
PANDUIT ®
Color Code
Figure Dimensions (In.)Stud Hole
Size(In.)
CopperConductor
SizePart Number
‡See pages L6, L7 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.
Code Conductor, One-Hole, Short Barrel with Window Lug, 45° Angle(continued)
F10 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Code Conductor, One-Hole, Short Barrel with Window Lug, 90° Angle
• Short barrel for limited space applications• Color coded barrels marked with PANDUIT ® and specified
competitor die index numbers for proper crimp die selection• Inspection window to visually assure full conductor insertion• Tin plated to inhibit corrosion
• UL Listed for use up to 35KV**, temperature rated 90°C and CSACertified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F11
LTBW
Std.Pkg.Qty.
Wire StripLength
(In.)
T&B DieIndex No.‡
Burndy DieIndex No.‡
PANDUIT ®
Die IndexNo.‡
PANDUIT ®
Color Code
Figure Dimensions (In.)Stud Hole
Size(In.)
CopperConductor
SizePart Number
‡See pages L6, L7 in Technical Info section for tool and die information**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.
Code Conductor, One-Hole, Short Barrel with Window Lug, 90° Angle(continued)
F12 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Code Conductor, One-Hole, Standard Barrel with Window Lug
• Color coded barrels marked with PANDUIT ® and specified competitor die index numbers for proper crimp die selection
• Inspection window to visually assure full conductor insertion• Tin plated to inhibit corrosion• UL Listed for use up to 35KV**, temperature rated 90°C and CSA
Certified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
• UL Listed and CSA Certified for wire range-taking capability whencrimped with PANDUIT ® UNI-DIE ™ dieless crimping tools ‡
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F13
LTBW
Std.Pkg.Qty.
Wire StripLength
(In.)
T&B DieIndex No.‡
Burndy DieIndex No.‡
PANDUIT ®
Die IndexNo.‡
PANDUIT ®
Color Code
Figure Dimensions (In.)Stud Hole
Size(In.)
CopperConductor
SizePart Number
‡See pages L8, L9 and L10, L11 in Technical Info section for tool and die information.*Not tested to NEBS Level 3 requirements.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.
Code Conductor, One-Hole, Standard Barrel with Window Lug (continued)
F14 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Code Conductor, One-Hole, Standard Barrel with Window Lug, 45° Angle
• Color coded barrels marked with PANDUIT ® and specified competitor die index numbers for proper crimp die selection
• Inspection window to visually assure full conductor insertion• Tin plated to inhibit corrosion• UL Listed for use up to 35KV**, temperature rated 90°C and CSA
Certified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
• UL Listed and CSA Certified for wire range-taking capability whencrimped with PANDUIT ® UNI-DIE ™ dieless crimping tools ‡
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F15
‡See pages L8, L9 and L10, L11 in Technical Info section for tool and die information.*Not tested to NEBS Level 3 requirements.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.
Code Conductor, One-Hole, Standard Barrel with Window Lug, 45° Angle(continued)
F16 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Code Conductor, One-Hole, Standard Barrel with Window Lug, 90° Angle
• Color coded barrels marked with PANDUIT ® and specified competitor die index numbers for proper crimp die selection
• Inspection window to visually assure full conductor insertion• Tin plated to inhibit corrosion
• UL Listed for use up to 35KV**, temperature rated 90°C and CSACertified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
• UL Listed and CSA Certified for wire range-taking capability whencrimped with PANDUIT ® UNI-DIE ™ dieless crimping tools ‡
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F17
LTBW
Std.Pkg.Qty.
Wire StripLength
(In.)
T&B DieIndex No.‡
Burndy DieIndex No.‡
PANDUIT ®
Die IndexNo.‡
PANDUIT ®
Color Code
Figure Dimensions (In.)Stud Hole
Size(In.)
CopperConductor
SizePart Number
‡See pages L8, L9 and L10, L11 in Technical Info section for tool and die information.*Not tested to NEBS Level 3 requirements.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.
Code Conductor, One-Hole, Standard Barrel with Window Lug, 90° Angle(continued)
F18 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Code Conductor, One-Hole, Standard Barrel with Window,Narrow Tongue Lug
• Narrow tongue width for limited space applications• Color coded barrels marked with PANDUIT ® and specified
competitor die index numbers for proper crimp die selection• Inspection window to visually assure full conductor insertion• Tin plated to inhibit corrosion
• UL Listed for use up to 35KV**, temperature rated 90°C and CSACertified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
• UL Listed and CSA Certified for wire range-taking capability whencrimped with PANDUIT ® UNI-DIE ™ dieless crimping tools ‡
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F19
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
‡See pages L8, L9 and L10, L11 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.
Code Conductor, One-Hole, Standard Barrel with Window,Narrow Tongue Lug (continued)
F20 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Code Conductor, Short Blank Tongue, Standard Barrel with Window Lug
• Color coded barrels marked with PANDUIT ® and specified competitor die index numbers for proper crimp die selection
• Inspection window to visually assure full conductor insertion
• Tin plated to inhibit corrosion• UL Recognized for use up to 35KV**, temperature rated 90°C
and CSA Certified to 600V when crimped with PANDUIT ® andspecified competitor crimping tools and dies
‡See pages L8, L9 and L10, L11 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F21
Code Conductor, One-Hole, Long Barrel Lug
• Long barrel maximizes number of crimps and provides premiumwire pull-out strength and electrical performance
• Color coded barrels marked with PANDUIT ® and specifiedcompetitor die index numbers for proper crimp die selection
• Enclosed barrel prevents corrosive material from entering barrelwhen used in harsh environments
• Tin plated to inhibit corrosion
• UL Listed for use up to 35KV**, temperature rated 90°C and CSACertified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
• UL Listed and CSA Certified for wire range-taking capability whencrimped with PANDUIT ® UNI-DIE ™ dieless crimping tools‡
F22 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
‡See pages L12, L13 and L14, L15 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.
Code Conductor, One-Hole, Long Barrel Lug (continued)
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F23
Code Conductor, One-Hole, Long Barrel Lug, 45° Angle
• Long barrel maximizes number of crimps and provides premiumwire pull-out strength and electrical performance
• Color coded barrels marked with PANDUIT ® and specified competitor die index numbers for proper crimp die selection
• Enclosed barrel prevents corrosive material from entering barrelwhen used in harsh environments
• Tin plated to inhibit corrosion
• UL Listed for use up to 35KV**, temperature rated 90°C and CSACertified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
• UL Listed and CSA Certified for wire range-taking capability whencrimped with PANDUIT ® UNI-DIE ™ dieless crimping tools‡
F24 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
‡See pages L12, L13 and L14, L15 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.
Code Conductor, One-Hole, Long Barrel Lug, 45° Angle (continued)
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F25
Code Conductor, One-Hole, Long Barrel Lug, 90° Angle
• Long barrel maximizes number of crimps and provides premiumwire pull-out strength and electrical performance
• Color coded barrels marked with PANDUIT ® and specified competitor die index numbers for proper crimp die selection
• Enclosed barrel prevents corrosive material from entering barrelwhen used in harsh environments
• Tin plated to inhibit corrosion
• UL Listed for use up to 35KV**, temperature rated 90°C and CSACertified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
• UL Listed and CSA Certified for wire range-taking capability whencrimped with PANDUIT ® UNI-DIE ™ dieless crimping tools‡
F26 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
‡See pages L12, L13 and L14, L15 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.
Code Conductor, One-Hole, Long Barrel Lug, 90° Angle (continued)
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F27
Code Conductor, One-Hole, Long Barrel with Window Lug
• Long barrel maximizes number of crimps and provides premiumwire pull-out strength and electrical performance
• Inspection window to visually assure full conductor insertion• Color coded barrels marked with PANDUIT ® and specified
competitor die index numbers for proper crimp die selection• Tin plated to inhibit corrosion• UL Listed for use up to 35KV**, temperature rated 90°C and CSA
Certified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
• UL Listed and CSA Certified for wire range-taking capability whencrimped with PANDUIT ® UNI-DIE ™ dieless crimping tools‡
• Tested by Telcordia — meets NEBS Level 3• Meets TIA-607 requirements for network systems
grounding applications
‡See pages L12, L13 and L14, L15 in Technical Info section for tool and die information.*Not tested to NEBS Level 3 requirements.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.
F28 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Code Conductor, One-Hole, Long Barrel with Window Lug, 45° Angle
• Long barrel maximizes number of crimps and provides premiumwire pull-out strength and electrical performance
• Inspection window to visually assure full conductor insertion• Tin plated to inhibit corrosion
• UL Listed for use up to 35KV**, temperature rated 90°C and CSACertified to 600V when crimped with PANDUIT ® tools and dies
• Meets TIA-607 requirements for network systems grounding applications
‡See pages L12, L13 and L14, L15 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.
W
T
INSPECTIONWINDOW 45˚
L
B
For Use with Stranded Copper Conductors
Part Number
CopperConductor
Size
Stud HoleSize(In.)
Figure Dimensions (In.) PANDUIT ®
Color Code
PANDUIT ®
Die IndexNo.‡
Burndy DieIndex No.‡
T&B DieIndex No.‡
Wire StripLength
(In.)
Std.Pkg.Qty.W B T L
LCB10-14WH-L #14 – #10AWG STR#12 – #10AWG SOL
1/4 .42 .53 .05 1.15 — — — — 9/16 50
Type LCB-WH
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F29
Code Conductor, One-Hole, Long Barrel with Window Lug, 90° Angle
‡See pages L12, L13 and L14, L15 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.
W INSPECTIONWINDOW
T
L
B
90˚
• Long barrel maximizes number of crimps and provides premiumwire pull-out strength and electrical performance
• Inspection window to visually assure full conductor insertion• Tin plated to inhibit corrosion
• UL Listed for use up to 35KV**, temperature rated 90°C and CSACertified to 600V when crimped with PANDUIT ® tools and dies
• Meets TIA-607 requirements for network systems grounding applications
For Use with Stranded Copper Conductors
Part Number
CopperConductor
Size
Stud HoleSize(In.)
Figure Dimensions (In.) PANDUIT ®
Color Code
PANDUIT ®
Die IndexNo.‡
Burndy DieIndex No.‡
T&B DieIndex No.‡
Wire StripLength
(In.)
Std.Pkg.Qty.W B T L
LCB10-14WF-L #14 – #10AWG STR#12 – #10AWG SOL
1/4 .42 .53 .05 .94 — — — — 9/16 50
Type LCB-WF
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
F30 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Code Conductor, One-Hole, Long Barrel with Corona Relief Taper Lug
• Externally chamfered barrel end inhibits Corona effect when usedin high voltage applications
• Long barrel maximizes number of crimps and provides premiumwire pull-out strength and electrical performance
• Color coded barrels marked with PANDUIT ® and specified competitor die index numbers for proper crimp die selection
• Enclosed barrel prevents corrosive material from entering barrelwhen used in harsh environments
• Tin plated to inhibit corrosion• UL Listed for use up to 35KV**, temperature rated 90°C and CSA
Certified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
‡See pages L16, L17 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.
CORONARELIEFTAPER
L
W
B
T
To Facilitate Use with Stranded Copper Conductors in Applications of 5000V or More
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F31
Code Conductor, Two-Hole, Standard Barrel with Window Lug
• Color coded barrels marked with PANDUIT ® and specified competitor die index numbers for proper crimp die selection
• Inspection window to visually assure full conductor insertion• Tin plated to inhibit corrosion• UL Listed for use up to 35KV**, temperature rated 90°C and CSA
Certified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
• UL Listed and CSA Certified for wire range-taking capabilitywhen crimped with PANDUIT ® UNI-DIE ™ dieless crimping tools‡
• Tested by Telcordia — meets NEBS Level 3• Available with NEMA hole sizes and spacing
F32 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
‡See pages L8, L9 and L10, L11 in Technical Info section for tool and die information.*Not tested to NEBS Level 3 requirements.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.◆NEMA hole sizes and spacing.
Code Conductor, Two-Hole, Standard Barrel with Window Lug (continued)
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F33
Code Conductor, Two-Hole, Standard Barrel with Window Lug, 45° Angle
• Color coded barrels marked with PANDUIT ® and specified competitor die index numbers for proper crimp die selection
• Inspection window to visually assure full conductor insertion• Tin plated to inhibit corrosion• UL Listed for use up to 35KV**, temperature rated 90°C and CSA
Certified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
• UL Listed and CSA Certified for wire range-taking capability whencrimped with PANDUIT ® UNI-DIE ™ dieless crimping tools‡
• Tested by Telcordia — meets NEBS Level 3• Available with NEMA hole sizes and spacing
F34 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
‡See pages L8, L9 and L10, L11 in Technical Info section for tool and die information.*Not tested to NEBS Level 3 requirements.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.◆NEMA hole sizes and spacing.
Code Conductor, Two-Hole, Standard Barrel with Window Lug, 45° Angle(continued)
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F35
For Use with Stranded Copper Conductors
Chart continues on page F36
Type LCD-F
Code Conductor, Two-Hole, Standard Barrel with Window Lug, 90° Angle
• Color coded barrels marked with PANDUIT ® and specifiedcompetitor die index numbers for proper crimp die selection
• Inspection window to visually assure full conductor insertion• Tin plated to inhibit corrosion• UL Listed for use up to 35KV**, temperature rated 90°C and CSA
Certified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
• UL Listed and CSA Certified for wire range-taking capability whencrimped with PANDUIT ® UNI-DIE ™ dieless crimping tools‡
• Tested by Telcordia — meets NEBS Level 3• Available with NEMA hole sizes and spacing
F36 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
LTBW
Std.Pkg.Qty.
Wire StripLength
(In.)T&B Die
Index No.‡
BurndyDie Index
No.‡
PANDUIT ®
Die IndexNo.‡
PANDUIT ®
ColorCode
Figure Dimensions (In.)Stud HoleSpacing
(In.)
Stud HoleSize(In.)
CopperConductor
SizePart Number
‡See pages L8, L9 and L10, L11 in Technical Info section for tool and die information.*Not tested to NEBS Level 3 requirements.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.◆NEMA hole sizes and spacing.
Code Conductor, Two-Hole, Standard Barrel with Window Lug, 90° Angle(continued)
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F37
Code Conductor, Two-Hole, Standard Barrel with Window,Narrow Tongue Lug
• Narrow tongue width for limited space applications• Color coded barrels marked with PANDUIT ® and specified
competitor die index numbers for proper crimp die selection• Inspection window to visually assure full conductor insertion• Tin plated to inhibit corrosion
• UL Listed for use up to 35KV**, temperature rated 90°C and CSACertified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
• UL Listed and CSA Certified for wire range-taking capability whencrimped with PANDUIT ® UNI-DIE ™ dieless crimping tools‡
‡See pages L8, L9 and L10, L11 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.
F38 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Code, Two-Hole, Standard Barrel with Window,Narrow Tongue Lug, 45°
• Narrow tongue width for limited space applications• Color coded barrels marked with PANDUIT ® and specified
competitor die index numbers for proper crimp die selection• Inspection window to visually assure full conductor insertion• Tin plated to inhibit corrosion
• UL Listed for use up to 35KV**, temperature rated 90°C and CSACertified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
• UL Listed and CSA Certified for wire range-taking capability whencrimped with PANDUIT ® UNI-DIE ™ dieless crimping tools‡
‡ See pages L8, L9 and L10, L11 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.
HOLESPACING
W
T
L
INSPECTIONWINDOW
45˚
B
For Use with Stranded Copper Conductors
Code, Two-Hole, Standard Barrel with Window,Narrow Tongue Lug, 90°
• Narrow tongue width for limited space applications• Color coded barrels marked with PANDUIT ® and specified
competitor die index numbers for proper crimp die selection• Inspection window to visually assure full conductor insertion• Tin plated to inhibit corrosion
• UL Listed for use up to 35KV**, temperature rated 90°C and CSACertified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
• UL Listed and CSA Certified for wire range-taking capability whencrimped with PANDUIT ® UNI-DIE ™ dieless crimping tools‡
‡See pages L8, L9 and L10, L11 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F39
Code Conductor, Long Blank Tongue, Standard Barrel with Window Lug
• Color coded barrels marked with PANDUIT ® and specified competitor die index numbers for proper crimp die selection
• Inspection window to visually assure full conductor insertion• Tin plated to inhibit corrosion
• UL Recognized for use up to 35KV**, temperature rated 90°Cand CSA Certified to 600V when crimped with PANDUIT ®
and specified competitor crimping tools and dies
‡See pages L8, L9 and L10, L11 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.
F40 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Code Conductor, Two-Hole, Long Barrel Lug
• Long barrel maximizes number of crimps and provides premiumwire pull-out strength and electrical performance
• Color coded barrels marked with PANDUIT ® and specified competitor die index numbers for proper crimp die selection
• Enclosed barrel prevents corrosive material from entering barrelwhen used in harsh environments
• Tin plated to inhibit corrosion
• UL Listed for use up to 35KV**, temperature rated 90°C and CSACertified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
• UL Listed and CSA Certified for wire range-taking capability whencrimped with PANDUIT ® UNI-DIE ™ dieless crimping tools‡
• Tested by Telcordia — meets NEBS Level 3• Available with NEMA hole sizes and spacing
W
HOLESPACING
L
T
B
For Use with Stranded Copper Conductors
HOLESPACING
L
W
T
B
Figure 1 Figure 2: Two Piece Brazed Tongue Construction
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F41
‡See pages L12, L13 and L14, L15 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.◆NEMA hole sizes and spacing
Code Conductor, Two-Hole, Long Barrel Lug (continued)
F42 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Code Conductor, Two-Hole, Long Barrel Lug, 45° Angle
• Long barrel maximizes number of crimps and provides premiumwire pull-out strength and electrical performance
• Color coded barrels marked with PANDUIT ® and specified competitor die index numbers for proper crimp die selection
• Enclosed barrel prevents corrosive material from entering barrelwhen used in harsh environments
• Tin plated to inhibit corrosion
• UL Listed for use up to 35KV**, temperature rated 90°C and CSACertified to 600V when crimped with PANDUIT ® and specified competitor crimping tools and dies
• UL Listed and CSA Certified for wire range-taking capability whencrimped with PANDUIT ® UNI-DIE ™ dieless crimping tools‡
• Tested by Telcordia — meets NEBS Level 3• Available with NEMA hole sizes and spacing
‡See pages L12, L13 and L14, L15 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.◆NEMA hole sizes and spacing.
LTBW
Std.Pkg.Qty.
Wire StripLength
(In.)
T&B DieIndex No.‡
BurndyDie Index
No.‡
PANDUIT ®
Die IndexNo.‡
PANDUIT ®
ColorCode
Figure Dimensions (In.)
StudHole
Spacing(In.)
StudHoleSize (In.)
CopperConductor
SizePart Number
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F43
Code Conductor, Two-Hole, Long Barrel Lug, 45° Angle (continued)
F44 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Code Conductor, Two-Hole, Long Barrel Lug, 90° Angle
• Long barrel maximizes number of crimps and provides premiumwire pull-out strength and electrical performance
• Color coded barrels marked with PANDUIT ® and specified competitor die index numbers for proper crimp die selection
• Enclosed barrel prevents corrosive material from entering barrelwhen used in harsh environments
• Tin plated to inhibit corrosion
• UL Listed for use up to 35KV**, temperature rated 90°C and CSACertified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
• UL Listed and CSA Certified for wire range-taking capabilitywhen crimped with PANDUIT ® UNI-DIE ™ dieless crimping tools‡
• Tested by Telcordia — meets NEBS Level 3• Available with NEMA hole sizes and spacing
‡See pages L12, L13 and L14, L15 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.◆NEMA hole sizes and spacing.
LTBW
Std.Pkg.Qty.
Wire StripLength
(In.)
T&B DieIndex No.‡
BurndyDie Index
No.‡
PANDUIT ®
Die IndexNo.‡
PANDUIT ®
ColorCode
Figure Dimensions (In.)
StudHole
Spacing(In.)
StudHoleSize(In.)
CopperConductor
SizePart Number
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F45
Code Conductor, Two-Hole, Long Barrel Lug, 90° Angle (continued)
F46 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
For Use with Stranded Copper Conductors
Code Conductor, Two-Hole, Long Barrel with Window Lug
• Long barrel maximizes number of crimps and provides premiumwire pull-out strength and electrical performance
• Inspection window to visually assure full conductor insertion• Color coded barrels marked with PANDUIT ® and specified
competitor die index numbers for proper crimp die selection• Tin plated to inhibit corrosion• UL Listed for use up to 35KV**, temperature rated 90°C and CSA
Certified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
• UL Listed and CSA Certified for wire range-taking capability whencrimped with PANDUIT ® UNI-DIE ™ dieless crimping tools‡
• Tested by Telcordia — meets NEBS Level 3• Meets TIA–607 requirements for network systems
grounding applications• Available with NEMA hole sizes and spacing
F48 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
‡See pages L12, L13 and L14, L15 in Technical Info section for tool and die information.*Not tested to NEBS Level 3 requirements.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.◆NEMA hole sizes and spacing.
Code Conductor, Two-Hole, Long Barrel with Window Lug (continued)
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F49
For Use with Stranded Copper Conductors
Code Conductor, Two-Hole, Long Barrel with Window Lug, 45° Angle
• Long barrel maximizes number of crimps and provides premiumwire pull-out strength and electrical performance
• Inspection window to visually assure full conductor insertion• Color coded barrels marked with PANDUIT ® and specified
competitor die index numbers for proper crimp die selection• Tin plated to inhibit corrosion• UL Listed for use up to 35KV**, temperature rated 90°C and CSA
Certified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
• UL Listed and CSA Certified for wire range-taking capability whencrimped with PANDUIT ® UNI-DIE ™ dieless crimping tools‡
• Tested by Telcordia — meets NEBS Level 3• Meets TIA-607 requirements for network systems
grounding applications• Available with NEMA hole sizes and spacing
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F51
Code Conductor, Two-Hole, Long Barrel with Window Lug, 45° Angle(continued)
‡See pages L12, L13 and L14, L15 in Technical Info section for tool and die information.*Not tested to NEBS Level 3 requirements.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.◆NEMA hole sizes and spacing
F52 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
For Use with Stranded Copper Conductors
Code Conductor, Two-Hole, Long Barrel with Window Lug, 90° Angle
• Long barrel maximizes number of crimps and provides premiumwire pull-out strength and electrical performance
• Inspection window to visually assure full conductor insertion• Color coded barrels marked with PANDUIT ® and specified
competitor die index numbers for proper crimp die selection• Tin plated to inhibit corrosion• UL Listed for use up to 35KV**, temperature rated 90°C and CSA
Certified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
• UL Listed and CSA Certified for wire range-taking capability whencrimped with PANDUIT ® UNI-DIE ™ dieless crimping tools‡
• Tested by Telcordia — meets NEBS Level 3• Meets TIA-607 requirements for network systems
grounding applications• Available with NEMA hole sizes and spacing
F54 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
‡See pages L12, L13 and L14, L15 in Technical Info section for tool and die information.*Not tested to NEBS Level 3 requirements.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.◆NEMA hole sizes and spacing
Code Conductor, Two-Hole, Long Barrel with Window Lug, 90° Angle(continued)
Code Conductor, Two-Hole, Long Barrel with Window,Narrow Tongue Lug
• Narrow tongue width for limited space applications• Long barrel maximizes number of crimps and provides premium
wire pull-out strength and electrical performance• Inspection window to visually assure full conductor insertion• Color coded barrels marked with PANDUIT ® and specified
competitor die index numbers for proper crimp die selection• Tin plated to inhibit corrosion
• UL Listed for use up to 35KV**, temperature rated 90°C and CSACertified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
• UL Listed and CSA Certified for wire range-taking capability whencrimped with PANDUIT ® UNI-DIE ™ dieless crimping tools‡
• Tested by Telcordia — meets NEBS Level 3• Meets TIA-607 requirements for network systems
grounding applications• Available with NEMA hole sizes and spacing
‡See pages L12, L13 and L14, L15 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.◆NEMA hole sizes and spacing
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F55
Code Conductor, Two-Hole, Long Barrel with Corona Relief Taper Lug
• Externally chamfered barrel end inhibits Corona effect when usedin high voltage applications
• Long barrel maximizes number of crimps and provides premiumwire pull-out strength and electrical performance
• Color coded barrels marked with PANDUIT ® and specified competitor die index numbers for proper crimp die selection
• Enclosed barrel prevents corrosive material from entering barrelwhen used in harsh environments
• Tin plated to inhibit corrosion
• UL Listed for use up to 35KV**, temperature rated 90°C and CSACertified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
• Available with NEMA hole sizes and spacing
‡See pages L16, L17 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.◆NEMA hole sizes and spacing
CORONARELIEFTAPER
W
HOLESPACING
L
T
B
To Facilitate Use with Stranded Copper Conductors in Applications of 5000V or More
F56 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Code Conductor, Blank Tongue, Long Barrel Lug
• Long barrel maximizes number of crimps and provides premiumwire pull-out strength and electrical performance
• Color coded barrels marked with PANDUIT ® and specified competitor die index numbers for proper crimp die selection
• Enclosed barrel prevents corrosive material from entering barrelwhen used in harsh environments
• Tin plated to inhibit corrosion• UL Recognized for use up to 35KV**, temperature rated 90°C
and CSA Certified to 600V when crimped with PANDUIT ® andspecified competitor crimping tools and dies
W
L
T
B
For Use with Stranded Copper Conductors
L
W
T
B
‡See pages L12, L13 and L14, L15 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.
Figure 1 Figure 2: Two Piece Brazed Tongue Construction
Type LCC-00
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F57
Code Conductor, Blank Tongue, Long Barrel with Window Lug
• Long barrel maximizes number of crimps and provides premiumwire pull-out strength and electrical performance
• Inspection window to visually assure full conductor insertion• Color coded barrels marked with PANDUIT ® and specified
competitor die index numbers for proper crimp die selection
• Enclosed barrel prevents corrosive material from entering barrelwhen used in harsh environments
• Tin plated to inhibit corrosion• UL Recognized for use up to 35KV**, temperature rated 90°C and
CSA Certified to 600V when crimped with PANDUIT ® and specified competitor crimping tools and dies
‡See pages L12, L13 and L14, L15 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.
F58 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Code Conductor, Short Barrel, Butt Splice
‡See pages L6, L7 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.
O.D.
L
For Use with Stranded Copper Conductors
• Short barrel for limited space applications• Color coded barrels marked with PANDUIT ® and specified
competitor die index numbers for proper crimp die selection• Internal wire stops to prevent over-insertion of conductor• Tin plated to inhibit corrosion
• UL Listed for use up to 35KV**, temperature rated 90°C and CSACertified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F59
Code Conductor, Standard Barrel, Butt Splice
‡See pages L8, L9 and L10, L11 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.
For Use with Stranded Copper Conductors
• Color coded barrels marked with PANDUIT ® and specifiedcompetitor die index numbers for proper crimp die selection
• Internal wire stops to prevent over-insertion of conductor• Tin plated to inhibit corrosion• UL Listed for use up to 35KV**, temperature rated 90°C and CSA
Certified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
• UL Listed and CSA Certified for wire range-taking capability whencrimped with PANDUIT ® UNI-DIE ™ dieless crimping tools‡
F60 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Code Conductor, Long Barrel, Butt Splice
• Long barrel maximizes the number of crimps and provides premium wire pull-out strength and electrical performance
• Color coded barrels marked with PANDUIT ® and specified competitor die index numbers for proper crimp die selection
• Internal wire stops to prevent over-insertion of conductor• Tin plated to inhibit corrosion
• UL Listed for use up to 35KV**, temperature rated 90°C and CSACertified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
• UL Listed and CSA Certified for wire range-taking capability whencrimped with PANDUIT ® UNI-DIE ™ dieless crimping tools‡
• Tested by Telcordia — meets NEBS Level 3
‡See pages L12, L13 and L14, L15 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F61
Code Conductor, Long Barrel with Corona Relief Taper Splice
• Externally chamfered barrel end inhibits Corona effect when usedin high voltage applications
• Color coded barrels marked with PANDUIT ® and specified competitor die index numbers for proper crimp die selection
• Internal wire stops to prevent over-insertion of conductor
• Tin plated to inhibit corrosion• UL Listed for use up to 35KV**, temperature rated 90°C and CSA
Certified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
‡See pages L16, L17 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.
O.D.
L
To Facilitate Use with Stranded Copper Conductors in Applications of 5000V or More
F64 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Flex Conductor, One-Hole, Standard Barrel with Window Lug
• Can be used with code conductor and flex conductor class:G, H, I, K, M and Locomotive
• Generously beveled wire entry prevents bent back strands wheninserting conductor into barrel
• Color coded barrels marked with PANDUIT ® and specified competitor die index numbers for proper crimp die selection
• Inspection window to visually assure full conductor insertion• Tin plated to inhibit corrosion• UL Listed for use up to 35KV**, temperature rated 90°C and CSA
Certified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
W
L
T
BINSPECTION
WINDOW
For Use with Flexible, Extra-Flexible and Code Stranded Copper Conductors
Part Number
Flex Conductor Size CodeConductor
Size
Stud HoleSize (In.)
Figure Dimensions (In.) PANDUIT ®
ColorCode
PANDUIT ®
Die IndexNo. ‡
Wire StripLength
(In.)
Std.Pkg.Qty.
Class G, H, I, K, M Locomotive W B T L
LCAX8-10-L
#8 AWG #8 AWG #8 AWG
#10 .41 .42 .08 1.11 Red P21 1/2 50
LCAX8-14-L 1/4 .48 .42 .07 1.20 Red P21 1/2 50
LCAX8-56-L 5/16 .56 .42 .05 1.32 Red P21 1/2 50
LCAX8-38-L 3/8 .60 .42 .05 1.42 Red P21 1/2 50
LCAX6-10-L
#6 AWG #6 AWG #6 AWG
#10 .45 .48 .09 1.19 Blue P24 9/16 50
LCAX6-14-L 1/4 .48 .48 .08 1.28 Blue P24 9/16 50
LCAX6-56-L 5/16 .56 .48 .07 1.40 Blue P24 9/16 50
LCAX6-38-L 3/8 .62 .48 .06 1.50 Blue P24 9/16 50
LCAX4-10-L
#4 AWG#5, #4, #3
AWG#4 AWG
#10 .55 .53 .09 1.26 Gray P29 5/8 50
LCAX4-14-L 1/4 .55 .53 .09 1.35 Gray P29 5/8 50
LCAX4-56-L 5/16 .55 .53 .09 1.47 Gray P29 5/8 50
LCAX4-38-L 3/8 .62 .53 .07 1.57 Gray P29 5/8 50
LCAX2-10-E
#2 AWG #2 AWG #2 AWG
#10 .70 .59 .11 1.40 Brown P33 11/16 20
LCAX2-14-E 1/4 .70 .59 .11 1.50 Brown P33 11/16 20
LCAX2-56-E 5/16 .70 .59 .11 1.63 Brown P33 11/16 20
LCAX2-38-E 3/8 .70 .59 .11 1.70 Brown P33 11/16 20
LCAX2-12-E 1/2 .75 .59 .09 1.94 Brown P33 11/16 20
LCAX2/0-14-X 1/4 .96 .83 .13 1.97 Black P45 7/8 10
LCAX2/0-56-X 5/16 .96 .83 .13 1.97 Black P45 7/8 10
LCAX2/0-38-X 3/8 .96 .83 .13 2.03 Black P45 7/8 10
LCAX2/0-12-X 1/2 .96 .83 .13 2.28 Black P45 7/8 10
LCAX2/0-58-X 5/8 .96 .83 .13 2.52 Black P45 7/8 10
LCAX2/0-34-X 3/4 .96 .83 .13 2.88 Black P45 7/8 10
Type LCAX
LTBWLocomotiveClass
G, H, I, K, M
Std.Pkg.Qty.
Wire StripLength
(In.)
PANDUIT ®
Die IndexNo. ‡
PANDUIT ®
ColorCode
Figure Dimensions (In.)Stud HoleSize(In.)
CodeConductor
Size
Flex Conductor Size
Part Number
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F65
‡See pages L22, L23 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.
Flex Conductor, One-Hole, Standard Barrel with Window Lug (continued)
F66 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Flex Conductor, One-Hole, Standard Barrel with Window Lug,45° Angle
• Can be used with code conductor and flex conductor class:G, H, I, K, M and Locomotive
• Generously beveled wire entry prevents bent back strands wheninserting conductor into barrel
• Color coded barrels marked with PANDUIT ® and specified competitor die index numbers for proper crimp die selection
• Inspection window to visually assure full conductor insertion• Tin plated to inhibit corrosion• UL Listed for use up to 35KV**, temperature rated 90°C and CSA
Certified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
T
L
INSPECTIONWINDOW
B
45˚
W
For Use with Flexible, Extra-Flexible and Code Stranded Copper Conductors
Part Number
Flex Conductor Size CodeConductor
Size
Stud HoleSize (In.)
Figure Dimensions (In.) PANDUIT ®
ColorCode
PANDUIT ®
Die IndexNo. ‡
Wire StripLength
(In.)
Std.Pkg.Qty.
Class G, H, I, K, M Locomotive W B T L
LCAX8-10H-L
#8 AWG #8 AWG #8 AWG
#10 .41 .42 .08 1.00 Red P21 1/2 50
LCAX8-14H-L 1/4 .48 .42 .07 1.09 Red P21 1/2 50
LCAX8-56H-L 5/16 .56 .42 .05 1.20 Red P21 1/2 50
LCAX8-38H-L 3/8 .60 .42 .05 1.30 Red P21 1/2 50
LCAX6-10H-L
#6 AWG #6 AWG #6 AWG
#10 .45 .48 .09 1.06 Blue P24 9/16 50
LCAX6-14H-L 1/4 .48 .48 .08 1.14 Blue P24 9/16 50
LCAX6-56H-L 5/16 .56 .48 .07 1.26 Blue P24 9/16 50
LCAX6-38H-L 3/8 .62 .48 .06 1.35 Blue P24 9/16 50
LCAX4-10H-L
#4 AWG#5, #4, #3
AWG#4 AWG
#10 .55 .53 .09 1.12 Gray P29 5/8 50
LCAX4-14H-L 1/4 .55 .53 .09 1.21 Gray P29 5/8 50
LCAX4-56H-L 5/16 .55 .53 .09 1.33 Gray P29 5/8 50
LCAX4-38H-L 3/8 .62 .53 .07 1.42 Gray P29 5/8 50
LCAX2-10H-E
#2 AWG #2 AWG #2 AWG
#10 .70 .59 .11 1.22 Brown P33 11/16 20
LCAX2-14H-E 1/4 .70 .59 .11 1.29 Brown P33 11/16 20
LCAX2-56H-E 5/16 .70 .59 .11 1.42 Brown P33 11/16 20
LCAX2-38H-E 3/8 .70 .59 .11 1.49 Brown P33 11/16 20
LCAX2-12H-E 1/2 .75 .59 .09 1.73 Brown P33 11/16 20
LCAX1-10H-X
#1 AWG #1 AWG #1 AWG
#10 .76 .66 .12 1.43 Green P37 3/4 10
LCAX1-14H-X 1/4 .76 .66 .12 1.43 Green P37 3/4 10
LCAX1-56H-X 5/16 .76 .66 .12 1.49 Green P37 3/4 10
LCAX2/0-14H-X 1/4 .96 .83 .13 1.68 Black P45 7/8 10
LCAX2/0-56H-X 5/16 .96 .83 .13 1.68 Black P45 7/8 10
LCAX2/0-38H-X 3/8 .96 .83 .13 1.74 Black P45 7/8 10
LCAX2/0-12H-X 1/2 .96 .83 .13 1.99 Black P45 7/8 10
LCAX2/0-58H-X 5/8 .96 .83 .13 1.99 Black P45 7/8 10
LCAX2/0-34H-X 3/4 .96 .83 .13 2.12 Black P45 7/8 10
Type LCAX-H
LTBWLocomotiveClass
G, H, I, K, M
Std.Pkg.Qty.
Wire StripLength
(In.)
PANDUIT ®
Die IndexNo. ‡
PANDUIT ®
ColorCode
Figure Dimensions (In.)Stud HoleSize (In.)
CodeConductor
Size
Flex Conductor Size
Part Number
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F67
‡See pages L22, L23 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.
Flex Conductor, One-Hole, Standard Barrel with Window Lug, 45° Angle(continued)
F68 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Flex Conductor, One-Hole, Standard Barrel with Window Lug,90° Angle
• Can be used with code conductor and flex conductor class:G, H, I, K, M and Locomotive
• Generously beveled wire entry prevents bent back strands wheninserting conductor into barrel
• Color coded barrels marked with PANDUIT ® and specified competitor die index numbers for proper crimp die selection
• Inspection window to visually assure full conductor insertion• Tin plated to inhibit corrosion• UL Listed for use up to 35KV**, temperature rated 90°C and CSA
Certified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
INSPECTIONWINDOWW
T
90˚
B
L
For Use with Flexible, Extra-Flexible and Code Stranded Copper Conductors
Part Number
Flex Conductor Size CodeConductor
Size
Stud HoleSize (In.)
Figure Dimensions (In.) PANDUIT ®
ColorCode
PANDUIT ®
Die IndexNo. ‡
Wire StripLength
(In.)
Std.Pkg.Qty.
Class G, H, I, K, M Locomotive W B T L
LCAX8-10F-L
#8 AWG #8 AWG #8 AWG
#10 .41 .42 .08 .90 Red P21 1/2 50
LCAX8-14F-L 1/4 .48 .42 .07 .99 Red P21 1/2 50
LCAX8-56F-L 5/16 .56 .42 .05 1.11 Red P21 1/2 50
LCAX8-38F-L 3/8 .60 .42 .05 1.21 Red P21 1/2 50
LCAX6-10F-L
#6 AWG #6 AWG #6 AWG
#10 .45 .48 .09 .99 Blue P24 9/16 50
LCAX6-14F-L 1/4 .48 .48 .08 1.03 Blue P24 9/16 50
LCAX6-56F-L 5/16 .56 .48 .07 1.15 Blue P24 9/16 50
LCAX6-38F-L 3/8 .62 .48 .06 1.25 Blue P24 9/16 50
LCAX4-10F-L
#4 AWG#5, #4, #3
AWG#4 AWG
#10 .55 .53 .09 1.03 Gray P29 5/8 50
LCAX4-14F-L 1/4 .55 .53 .09 1.12 Gray P29 5/8 50
LCAX4-56F-L 5/16 .55 .53 .09 1.24 Gray P29 5/8 50
LCAX4-38F-L 3/8 .62 .53 .07 1.34 Gray P29 5/8 50
LCAX2-10F-E
#2 AWG #2 AWG #2 AWG
#10 .70 .59 .11 1.21 Brown P33 11/16 20
LCAX2-14F-E 1/4 .70 .59 .11 1.31 Brown P33 11/16 20
LCAX2-56F-E 5/16 .70 .59 .11 1.44 Brown P33 11/16 20
LCAX2-38F-E 3/8 .70 .59 .11 1.51 Brown P33 11/16 20
LCAX2-12F-E 1/2 .75 .59 .09 1.75 Brown P33 11/16 20
LCAX1-10F-X
#1 AWG #1 AWG #1 AWG
#10 .76 .66 .12 1.28 Green P37 3/4 10
LCAX1-14F-X 1/4 .76 .66 .12 1.45 Green P37 3/4 10
LCAX1-56F-X 5/16 .76 .66 .12 1.51 Green P37 3/4 10
LCAX2/0-14F-X 1/4 .96 .83 .13 1.67 Black P45 7/8 10
LCAX2/0-56F-X 5/16 .96 .83 .13 1.67 Black P45 7/8 10
LCAX2/0-38F-X 3/8 .96 .83 .13 1.73 Black P45 7/8 10
LCAX2/0-12F-X 1/2 .96 .83 .13 1.98 Black P45 7/8 10
LCAX2/0-58F-X 5/8 .96 .83 .13 2.22 Black P45 7/8 10
LCAX2/0-34F-X 3/4 .96 .83 .13 2.41 Black P45 7/8 10
Type LCAX-F
LTBWLocomotiveClass
G, H, I, K, M
Std.Pkg.Qty.
Wire StripLength
(In.)
PANDUIT ®
Die IndexNo. ‡
PANDUIT ®
ColorCode
Figure Dimensions (In.)Stud HoleSize (In.)
CodeConductor
Size
Flex Conductor Size
Part Number
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F69
‡See pages L22, L23 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.
Flex Conductor, One-Hole, Standard Barrel with Window Lug,90° Angle (continued)
F70 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Flex Conductor, One-Hole, Standard Barrel with Window,Narrow Tongue Lug
• Narrow tongue width for limited space applications• Can be used with flex conductor class: G, H, I, K, M
and Locomotive• Generously beveled wire entry prevents bent back strands when
inserting conductor into barrel• Color coded barrels marked with PANDUIT ® and specified
competitor die index numbers for proper crimp die selection
• Inspection window to visually assure full conductor insertion• Tin plated to inhibit corrosion• UL Listed for use up to 35KV**, temperature rated 90°C and CSA
Certified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
‡See pages L22, L23 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.
W
L
INSPECTIONWINDOW
B
T
For Use with Flexible, Extra-Flexible and Code Stranded Copper Conductors
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F71
Flex, One-Hole, Standard Barrel with Window,Narrow Tongue Lug, 45°
• Narrow tongue width for limited space applications• Can be used with flex conductor class: G, H, I, K, M
and Locomotive• Generously beveled wire entry prevents bent back strands when
inserting conductor into barrel• Color coded barrels marked with PANDUIT ® and specified
competitor die index numbers for proper crimp die selection
• Inspection window to visually assure full conductor insertion• Tin plated to inhibit corrosion• UL Listed for use up to 35KV**, temperature rated 90°C and CSA
Certified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
‡See pages L22, L23 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.
W
INSPECTIONWINDOW
B
L
45˚T
For Use with Flexible, Extra-Flexible and Code Stranded Copper Conductors
F72 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Flex, One-Hole, Standard Barrel with Window, Narrow Tongue Lug, 90°
• Narrow tongue width for limited space applications• Can be used with flex conductor class: G, H, I, K, M
and Locomotive• Generously beveled wire entry prevents bent back strands when
inserting conductor into barrel• Color coded barrels marked with PANDUIT ® and specified
competitor die index numbers for proper crimp die selection
• Inspection window to visually assure full conductor insertion• Tin plated to inhibit corrosion• UL Listed for use up to 35KV**, temperature rated 90°C and CSA
Certified to 600V when crimped with PANDUIT ® and specified competitor crimping tools and dies
‡See pages L22, L23 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.
INSPECTIONWINDOWW
T
L
B
90˚
For Use with Flexible, Extra-Flexible and Code Stranded Copper Conductors
F74 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
‡See pages L24, L25 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.
Flex Conductor, One-Hole, Standard Barrel with Window, Flared Lug(continued)
F76 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
‡See pages L24, L25 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.
Flex, One-Hole, Standard Barrel with Window, Flared Lug, 45° Angle(continued)
F78 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
‡See pages L24, L25 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.
Flex, One-Hole, Standard Barrel with Window, Flared Lug, 90° Angle(continued)
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F79
Flex Conductor, One-Hole, Long Barrel with Window Lug
• Can be used with code conductor and flex conductor class:G, H, I, K, M and Locomotive
• Long barrel maximizes number of crimps and provides premiumwire pull-out strength and electrical performance
• Generously beveled wire entry prevents bent back strands wheninserting conductor into barrel
• Color coded barrels marked with PANDUIT ® and specified competitor die index numbers for proper crimp die selection
• Inspection window to visually assure full conductor insertion• Tin plated to inhibit corrosion• UL Listed for use up to 35KV**, temperature rated 90°C and CSA
Certified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
• Meets TIA-607 requirements for network systemsgrounding applications
‡See pages L22, L23 in Technical Info section for tool and die information.
W
L
INSPECTIONWINDOW
B
T
**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.
For Use with Flexible, Extra-Flexible and Code Stranded Copper Conductors
F80 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Flex Conductor, One-Hole, Long Barrel with Window Lug, 45° Angle
• Can be used with code conductor and flex conductor class:G, H, I, K, M and Locomotive
• Long barrel maximizes number of crimps and provides premiumwire pull-out strength and electrical performance
• Generously beveled wire entry prevents bent back strands wheninserting conductor into barrel
• Color coded barrels marked with PANDUIT ® and specified competitor die index numbers for proper crimp die selection
• Inspection window to visually assure full conductor insertion• Tin plated to inhibit corrosion• UL Listed for use up to 35KV**, temperature rated 90°C and CSA
Certified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
• Meets TIA-607 requirements for network systems grounding applications
‡See pages L22, L23 in Technical Info section for tool and die information.
45˚
L
W
T
B
For Use with Flexible, Extra-Flexible and Code Stranded Copper Conductors
**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F81
Flex Conductor, One-Hole, Long Barrel with Window Lug, 90° Angle
• Can be used with code conductor and flex conductor class:G, H, I, K, M and Locomotive
• Long barrel maximizes number of crimps and provides premiumwire pull-out strength and electrical performance
• Generously beveled wire entry prevents bent back strands wheninserting conductor into barrel
• Color coded barrels marked with PANDUIT ® and specified competitor die index numbers for proper crimp die selection
• Inspection window to visually assure full conductor insertion• Tin plated to inhibit corrosion• UL Listed for use up to 35KV**, temperature rated 90°C and CSA
Certified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
• Meets TIA-607 requirements for network systemsgrounding applications
‡See pages L22, L23 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.
W INSPECTIONWINDOW
T
90˚
L
B
For Use with Flexible, Extra-Flexible and Code Stranded Copper Conductors
F82 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Flex Conductor, Two-Hole, Standard Barrel with Window Lug
• Can be used with code conductor and flex conductor class:G, H, I, K, M and Locomotive
• Generously beveled wire entry prevents bent back strands wheninserting conductor into barrel
• Color coded barrels marked with PANDUIT ® and specified competitor die index numbers for proper crimp die selection
• Inspection window to visually assure full conductor insertion• Tin plated to inhibit corrosion• UL Listed for use up to 35KV**, temperature rated 90°C and CSA
Certified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
• Available with NEMA hole sizes and spacing
HOLESPACING
L
W
T
INSPECTIONWINDOW
B
For Use with Flexible, Extra-Flexible and Code Stranded Copper Conductors
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F83
‡See pages L22, L23 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.◆NEMA hole sizes and spacing.
Flex Conductor, Two-Hole, Standard Barrel with Window Lug (continued)
F84 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Flex Conductor, Two-Hole, Standard Barrel with Window Lug,45° Angle
• Can be used with code conductor and flex conductor class:G, H, I, K, M and Locomotive
• Generously beveled wire entry prevents bent back strands wheninserting conductor into barrel
• Color coded barrels marked with PANDUIT ® and specified competitor die index numbers for proper crimp die selection
• Inspection window to visually assure full conductor insertion• Tin plated to inhibit corrosion• UL Listed for use up to 35KV**, temperature rated 90°C and CSA
Certified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
• Available with NEMA hole sizes and spacing
W
HOLESPACING
INSPECTIONWINDOW
T
L
45˚
B
For Use with Flexible, Extra-Flexible and Code Stranded Copper Conductors
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F85
‡See pages L22, L23 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.◆NEMA hole sizes and spacing.
Flex Conductor, Two-Hole, Standard Barrel with Window Lug, 45° Angle(continued)
F86 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
For Use with Flexible, Extra-Flexible and Code Stranded Copper Conductors
Flex Conductor, Two-Hole, Standard Barrel with Window Lug,90° Angle
• Can be used with code conductor and flex conductor class:G, H, I, K, M and Locomotive
• Generously beveled wire entry prevents bent back strands wheninserting conductor into barrel
• Color coded barrels marked with PANDUIT ® and specified competitor die index numbers for proper crimp die selection
• Inspection window to visually assure full conductor insertion• Tin plated to inhibit corrosion• UL Listed for use up to 35KV**, temperature rated 90°C and CSA
Certified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F87
‡See pages L22, L23 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.◆NEMA hole sizes and spacing.
Flex Conductor, Two-Hole, Standard Barrel with Window Lug,90° Angle (continued)
F88 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Flex Conductor, Two-Hole, Standard Barrel with Window,Narrow Tongue Lug
• Narrow tongue width for limited space applications• Can be used with code conductor and flex conductor class:
G, H, I, K, M and Locomotive• Generously beveled wire entry prevents bent back strands when
inserting conductor into barrel• Color coded barrels marked with PANDUIT ® and specified
competitor die index numbers for proper crimp die selection
• Inspection window to visually assure full conductor insertion• Tin plated to inhibit corrosion• UL Listed for use up to 35KV**, temperature rated 90°C and CSA
Certified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
• Available with NEMA hole sizes and spacing
‡See pages L22, L23 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.◆NEMA hole sizes and spacing.
HOLESPACING
L
W
INSPECTIONWINDOW
B
T
For Use with Flexible, Extra-Flexible and Code Stranded Copper Conductors
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F89
Flex, Two-Hole, Standard Barrel with Window,Narrow Tongue Lug, 45°
• Narrow tongue width for limited space applications• Can be used with locomotive flex conductor • Generously beveled wire entry prevents bent back strands when
inserting conductor into barrel• Color coded barrels marked with PANDUIT ® and specified
competitor die index numbers for proper crimp die selection
• Inspection window to visually assure full conductor insertion• Tin plated to inhibit corrosion• UL Listed for use up to 35KV**, temperature rated 90°C and CSA
Certified to 600V when crimped with PANDUIT ® and specified competitor crimping tools and dies
‡See pages L22, L23 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.
F90 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Flex, Two-Hole, Standard Barrel with Window,Narrow Tongue Lug, 90°
• Narrow tongue width for limited space applications• Can be used with locomotive flex conductor• Generously beveled wire entry prevents bent back strands when
inserting conductor into barrel• Color coded barrels marked with PANDUIT ® and specified
competitor die index numbers for proper crimp die selection
• Inspection window to visually assure full conductor insertion• Tin plated to inhibit corrosion• UL Listed for use up to 35KV**, temperature rated 90°C and CSA
Certified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
‡See pages L22, L23 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F91
Flex Conductor, Two-Hole, Long Barrel with Window Lug
• Can be used with code conductor and flex conductor class:G, H, I, K, M and Locomotive
• Long barrel maximizes number of crimps and provides premiumwire pull-out strength and electrical performance
• Generously beveled wire entry prevents bent back strands wheninserting conductor into barrel
• Color coded barrels marked with PANDUIT ® and specified competitor die index numbers for proper crimp die selection
• Inspection window to visually assure full conductor insertion• Tin plated to inhibit corrosion• UL Listed for use up to 35KV**, temperature rated 90°C and CSA
Certified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
• Meets TIA-607 requirements for network systemsgrounding applications
• Available with NEMA hole sizes and spacing
W
HOLESPACING
L
INSPECTIONWINDOW
T
B
For Use with Flexible, Extra-Flexible and Code Stranded Copper Conductors
F92 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
‡See pages L22, L23 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.◆NEMA hole sizes and spacing.
Flex Conductor, Two-Hole, Long Barrel with Window Lug (continued)
Flex Conductor, Two-Hole, Long Barrel with Window Lug, 45° Angle
• Can be used with code conductor and flex conductor class:G, H, I, K, M and Locomotive
• Long barrel maximizes number of crimps and provides premiumwire pull-out strength and electrical performance
• Generously beveled wire entry prevents bent back strands wheninserting conductor into barrel
• Color coded barrels marked with PANDUIT ® and specified competitor die index numbers for proper crimp die selection
• Inspection window to visually assure full conductor insertion• Tin plated to inhibit corrosion• UL Listed for use up to 35KV**, temperature rated 90°C and CSA
Certified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
• Meets TIA-607 requirements for network systemsgrounding applications
• Available with NEMA hole sizes and spacing
45˚
HOLESPACING
W
T
INSPECTIONWINDOW
B
L
For Use with Flexible, Extra-Flexible and Code Stranded Copper Conductors
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F93
‡See pages L22, L23 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.◆NEMA hole sizes and spacing
Flex Conductor, Two-Hole, Long Barrel with Window Lug, 45° Angle(continued)
F94 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Flex Conductor, Two-Hole, Long Barrel with Window Lug,90° Angle
• Can be used with code conductor and flex conductor class:G, H, I, K, M and Locomotive
• Long barrel maximizes number of crimps and provides premiumwire pull-out strength and electrical performance
• Generously beveled wire entry prevents bent back strands wheninserting conductor into barrel
• Color coded barrels marked with PANDUIT ® and specified competitor die index numbers for proper crimp die selection
• Inspection window to visually assure full conductor insertion• Tin plated to inhibit corrosion• UL Listed for use up to 35KV**, temperature rated 90°C and CSA
Certified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
• Meets TIA-607 requirements for network systemsgrounding applications
• Available with NEMA hole sizes and spacing
90˚
W INSPECTIONWINDOW
HOLESPACING
T
B
L
For Use with Flexible, Extra-Flexible and Code Stranded Copper Conductors
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F95
‡See pages L22, L23 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.◆NEMA hole sizes and spacing.
Flex Conductor, Two-Hole, Long Barrel with Window Lug, 90° Angle(continued)
Flex Conductor, Two-Hole, Long Barrel, Flared Lug
• Can be used with flex conductor class: K, M and Locomotive• Long barrel maximizes the number of crimps and provides
premium wire pull-out strength and electrical performance• Flared entry prevents bent back strands when inserting fine strand
conductor into barrel• Color coded barrels marked with PANDUIT ® die index numbers for
proper crimp die selection
• Enclosed barrel prevents corrosive material from entering barrelwhen used in harsh environments
• Tin plated to inhibit corrosion• UL Listed for use up to 35KV** and temperature rated 90°C and
CSA Certified to 600V when crimped with PANDUIT ® crimpingtools and dies
• Tested by Telcordia — meets NEBS Level 3• Available with NEMA hole sizes and spacing
W
HOLESPACING
L
B
TFLAREDENTRY
For Use with Flexible and Extra-Flexible Copper Conductors
F96 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
‡See pages L24, L25 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.◆NEMA hole sizes and spacing.
Flex Conductor, Two-Hole, Long Barrel, Flared Lug (continued)
F98 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
‡See pages L24, L25 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.◆NEMA hole sizes and spacing.
Flex Conductor, Two-Hole, Long Barrel, Flared Lug, 45° Angle(continued)
F100 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
‡See pages L24, L25 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.◆NEMA hole sizes and spacing.
Flex Conductor, Two-Hole, Long Barrel, Flared Lug, 90° Angle (continued)
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F101
Flex Conductor, Standard Barrel, Flared, Butt Splice
• Can be used with flex conductor class: K, M and Locomotive• Flared entry prevents bent back strands when inserting fine strand
conductor into barrel• Color coded barrels marked with PANDUIT ® die index numbers
for proper crimp die selection• Internal wire stops to prevent over-insertion of conductor
• Tin plated to inhibit corrosion• UL Listed for use up to 35KV** and temperature rated 90°C and
CSA Certified to 600V when crimped with PANDUIT ® crimpingtools and dies
• Tested by Telcordia — meets NEBS Level 3
‡See pages L24, L25 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.
For Use with Flexible and Extra-Flexible Copper Conductors
Type SCSF
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
F102 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Code/Flex Conductor, with Window, In-Line Reducing Splice Kit
• Includes all components in one package for making a completeelectrical connection: PANDUIT ® Copper Compression RSC In-Line Reducing Splice (See page F104) and Crystal Clear PVCHeat Shrink sleeves pre-cut to length to insulate reducing splice(See page K27)
• PANDUIT ® Crystal Clear PVC Heat Shrink has a UL 224 VW-1flammability rating and passes Telcordia GR-347-CORECompression and Cut-Through Penetration Test and AbrasionResistance Test
• PANDUIT ® Crystal Clear PVC Heat Shrink is UL Recognized with a temperature rating of 150°C, high temperatureinsulating property
• Rated for 600V applications when PANDUIT ® Crystal Clear PVCHeat Shrink is applied
F104 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Code/Flex Conductor, with Window, In-Line Reducing Splice
‡See pages L26, L27, L28, L29, L30, L31 in Technical Info section for tool and die information.*Also UL Listed and CSA Crertified for #3 AWG STR and #2 AWG SOL.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.
• Tin plated to inhibit corrosion• UL Listed for use up to 35KV**, temperature
rated 90°C and CSA Certified to 600V whencrimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
• Also sold as a kit with crystal clear PVC heatshrink (see pages F102, F103).
For Use with Stranded Copper Code and Class I Flex Conductors
L
BFROM
BTO
Part Number
CopperConductor
Size
Figure Dimension(In.)
PANDUIT ®
ColorCode
PANDUIT ®
Die IndexNo.‡
BurndyDie Index
No.‡
T&B DieIndex No.‡
Wire StripLength
(In.)
Std.Pkg.Qty.B L
RSC4-6-L Reduces From #4 AWG* 1.052.54
Gray P29 8 29 1 1
Reduces To #6 AWG 1.38 Blue P24 7 24 1 5/16
RSC2-6-Q Reduces From #2 AWG 1.052.62
Brown P33 10 33 1 1
Reduces To #6 AWG 1.38 Blue P24 7 24 1 5/16
RSC2-4-Q Reduces From #2 AWG 1.052.50
Brown P33 10 33 1 1
Reduces To #4 AWG* 1.38 Gray P29 8 29 1 5/16
RSC1/0-6-X Reduces From 1/0 AWG 1.052.81
Pink P42 12 42 1 1
Reduces To #6 AWG 1.38 Blue P24 7 24 1 5/16
RSC1/0-4-X Reduces From 1/0 AWG 1.052.70
Pink P42 12 42 1 1
Reduces To #4 AWG* 1.38 Gray P29 8 29 1 5/16
RSC2/0-6-X Reduces From 2/0 AWG 1.132.99
Black P45 13 45 1 1/16 1
Reduces To #6 AWG 1.38 Blue P24 7 24 1 5/16
RSC2/0-4-X Reduces From 2/0 AWG 1.132.88
Black P45 13 45 1 1/16 1
Reduces To #4 AWG* 1.38 Gray P29 8 29 1 5/16
RSC4/0-6-X Reduces From 4/0 AWG 1.133.24
Purple P54 15 54 1 1/16 1
Reduces To #6 AWG 1.38 Blue P24 7 24 1 5/16
RSC4/0-4-X Reduces From 4/0 AWG 1.133.12
Purple P54 15 54 1 1/16 1
Reduces To #4 AWG* 1.38 Gray P29 8 29 1 5/16
RSC4/0-1/0-X Reduces From 4/0 AWG 1.163.13
Purple P54 15 54 1 1/16 1
Reduces To 1/0 AWG 1.63 Pink P42 12 42 1 9/16
RSC4/0-2/0-X Reduces From 4/0 AWG 1.162.90
Purple P54 15 54 1 1/16 1
Reduces To 2/0 AWG 1.50 Black P45 13 45 1 7/16
RSC500-X4/0-6 Reduces From 500 kcmil 1.943.97
Brown P87 20 87 1 7/8 1
Reduces To 4/0 Flex 1.50 Yellow P62 16 62 1 7/16
RSC500-X350-6 Reduces From 500 kcmil 1.944.38
Brown P87 20 87 1 7/8 1
Reduces To 350 Flex 1.94 Blue P76 19 76 1 7/8
RSC750-4/0-6 Reduces From 750 kcmil 2.064.66
Black P106 24 106 2 1
Reduces To 4/0 AWG 1.50 Purple P54 15 54 1 5/8
RSC750-X4/0-6 Reduces From 750 kcmil 2.064.54
Black P106 24 106 2 1
Reduces To 4/0 Flex 1.50 Yellow P62 16 62 1 7/16
RSC750-X350-6 Reduces From 750 kcmil 2.064.45
Black P106 24 106 2 1
Reduces To 3/0 Flex 1.94 Blue P76 19 76 1 7/8
RSC750-500-6 Reduces From 750 kcmil 2.064.45
Black P106 24 106 2 1
Reduces To 500 kcmil 1.94 Brown P87 20 87 1 7/8
RSC750-X500-6 Reduces From 750 kcmil 2.064.63
Black P106 24 106 2 1
Reduces To 500 Flex 2.06 Pink P99 400 99 2
RSC750-750-6 Reduces From 750 kcmil 2.064.63
Black P106 24 106 2 1
Reduces To 750 kcmil 2.06 Black P106 24 106 2
RSCX750-4/0-3 Reduces From 750 Flex 2.065.04
Yellow P115 115 115 2 1
Reduces To 4/0 AWG 1.50 Purple P54 15 54 1 5/8
RSCX750-750-3 Reduces From 750 Flex 2.064.50
Yellow P115 115 115 2 1
Reduces To 750 kcmil 2.06 Black P106 24 106 2
Type RSC
Part Number
Copper ConductorSize No.
ofRibs
Figure Dimensions (In.) PANDUIT ®
ColorCode
Wire StripLength
(In.)
Std.Pkg.Qty.Run Tap L T V Q
CTAPF10-16-C* #14 AWG #12 AWG #10 AWG
#16 AWG – #14 AWG#16 AWG – #12 AWG
#14 AWG
0 .41 .06 .19 .13 Red 1/2 100
CTAPF8-12-C #10 AWG #8 AWG
#10 AWG #12 AWG
0 .67 .07 .26 .19 Blue 11/16 100
CTAPF6-12-C #8 AWG #6 AWG
#10 AWG – #8 AWG#12 AWG – #10 AWG
0 .67 .07 .32 .24 Gray 11/16 100
CTAPF4-12-C #6 AWG #5 AWG,#4 AWG
#8 AWG – #6 AWG#12 AWG – #8 AWG
1 1.25 .07 .40 .28 Brown 1 5/16 100
CTAPF3-12-C #5 AWG, #4 AWG #3 AWG
#6 AWG – #5 AWG#12 AWG – #6 AWG
1 1.25 .08 .46 .31 Green 1 5/16 100
CTAPF2-12-C #4 AWG #3 AWG #2 AWG
#4 AWG #5 AWG
#12 AWG – #6 AWG
1 1.25 .08 .51 .33 Pink 1 5/16 100
CTAPF1-12-C #3 AWG #2 AWG #1 AWG
#4 AWG – #3 AWG #5 AWG – #4 AWG #12 AWG – #5 AWG
2 1.82 .08 .57 .40 Black 1 7/8 100
CTAPF1/0-12-L #2 AWG #1 AWG 1/0 AWG
#4 AWG – #2 AWG #4 AWG – #3 AWG#12 AWG – #4 AWG
2 1.82 .09 .63 .42 Orange 1 7/8 50
CTAPF2/0-12-Q #1 AWG 1/0 AWG 2/0 AWG
#2 AWG – #1 AWG #3 AWG – #2 AWG#12 AWG – #3 AWG
2 1.82 .09 .71 .48 Purple 1 7/8 25
CTAPF3/0-12-Q 1/0 AWG 2/0 AWG 3/0 AWG
#1 AWG – 1/0 AWG #2 AWG – #1 AWG#12 AWG – #2 AWG
2 1.82 .09 .81 .55 Yellow 1 7/8 25
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F105
Code Conductor, Thin Wall, CTAP
• For copper-to-copper tapping splicing or pigtailing• Wire range-taking capability minimizes inventory requirements• Color coded for proper crimp die selection• Ribbed design provides high strength
• Made from high conductivity wrought copper • UL Listed for use up to 600V, temperature rated 90°C and CSA
Certified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
‡See pages L32, L33 in Technical Info section for tool and die information.*CTAPF10-16-C available with square, not flared ends.
QV
LT
For Copper Code Stranded Connections
Type CTAPF
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
F106 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Code Conductor, Heavy Duty, CTAP
• For tapping into unbroken continuous main, as a wire joint or 2-way splice
• Wire range-taking capability minimizes inventory requirements• Made from heavy wall, extruded, high conductivity copper;
provides high strength and premium electrical properties
• UL Listed per UL 486A for use up to 35KV** and temperaturerated 90°C when crimped with PANDUIT ® and specified competitor crimping tools and dies
• UL Listed per UL 467 for grounding and bonding suitable fordirect burial in earth or concrete when crimped with PANDUIT ®
and specified competitor crimping tools and dies
‡See page L34 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.
WL
H
For Use with Solid and Stranded Copper Code Conductors
Part Number
Copper ConductorSize
FigureDimensions (In.)
PANDUIT ®
Die IndexNo.‡
BurndyDie Index
No.‡
Wire StripLength
(In.)Tap
Cover
Std.Pkg.Qty.Run Tap L W H
CTAP4-8-L #6 – #4 SOL or STR #8 SOL or STR .46 .63 .73 PBG BG 3/4 TAPC2-2/0-X 50
CTAP4-6-L #6 STR, #4 SOL or STR #6 SOL or STR .48 .63 .76 PBG BG 3/4 TAPC2-2/0-X 50
CTAP4-4-L #4 SOL or STR #4 STR .46 .63 .81 PBG BG 3/4 TAPC2-2/0-X 50
CTAP2-4-Q #2 SOL or STR #8 – #4 SOL or STR .60 .76 .96 PC C 7/8 TAPC2-2/0-X 25
CTAP2-2-X #2 SOL or STR #2 SOL or STR .60 .75 1.05 PC C 7/8 TAPC2-2/0-X 10
CTAP2/0-2-X 1/0 – 2/0 STR #8 – #2 SOL or STR .80 .93 1.32 PO O 1 1/16 TAPC2-2/0-X 10
CTAP2/0-2/0-X 1/0 – 2/0 STR 1/0 – 2/0 STR .80 .93 1.37 PO O 1 1/16 TAPC2-2/0-X 10
CTAP4/0-2-X 3/0 – 4/0 STR #6 – #2 SOL or STR .94 1.08 1.66 PD3 F 1 1/4 TAPC3/0-4/0-5 10
F108 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Code/Flex Conductor HTAP
• Used to tap into continuous conductors as a splice or pigtailing• Each HTAP terminates a wide range of conductor sizes and
combinations of code and flex conductors Class G, H, I andLocomotive to suit a variety of applications
• Slotted design allows quick and easy assembly of conductor toHTAP using 3 PANDUIT ® 94 V-0 cable ties included
• Tap grooves are separated from one another allowing them to function independently so HTAP can be used with a single or multiple taps providing maximum design and installation flexibility
• Color coded and marked with PANDUIT ® die index numbers forproper crimp die selection
• UL Listed and CSA Certified for applications up to 600V whencrimped with PANDUIT ® and specified competitor crimping toolsand PANDUIT ® crimp dies
• Tin plated to inhibit corrosion• See page G4 for detailed installation instructions
‡See page L35 in Technical Info section for tool and die information.
WRUN
TAP 1
H
L
TAP 1
RUN
H
WL
WRUN
TAP 1TAP 2
TAP 2
L
H
TAP 1 TAP 2
H
RUNW L W L
RUN
H
TAP 1 TAP 2 TAP 2
W L
H
RUN
For Making Parallel and Multiple Tap Connections on Code and Flex Conductors
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F109
Clear Covers for HTCT HTAPs
• Made of high impact, optical grade plastic to provide high impactstrength and 360° inspections of crimped connection to assure thecrimp is complete and the correct die was used
• Incorporate dual self-latching spring loaded latches and suppliedwith two PANDUIT ® UL 94 V-0 cable ties – allow for easy snap-onassembly and ensure covers are secured
• Low profile design minimizes space requirements• Each cover half supports installation information labels inside
plastic retainer strips to allow labels to be viewed on either sideof cover and to protect labels from being removed
• Incorporate molded in flash barriers which encompass the HTAPinstallation providing protection against electrical flash over
• UL 94 V-0 flame rating and oxygen index of 31 providing self-extinguishing, flame retardant properties
• Part number, voltage rating, temperature rating and HTCTpart number molded into cover for easy identification
• See page G4 for detailed installation instructions
For Use with Solid and Stranded Copper Code Conductors
Shown Assembled
Type CLRCVR
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
F110
Index
PANDUIT ® Custom Copper Compression Lugs for Special Applications
Manufactured to meet your special dimensional specifications and requirements
PANDUIT ® has incorporated manufacturing processes that permit custom lug capabilities with premium two day or standard two week delivery. PANDUIT ® offers a wide varietyof dimensional choices for #8 AWG to 250 kcmil copper codelugs and #8 AWG to 4/0 AWG copper flex lugs.
Options:Tongues
Stud Holes
Barrels
— Straight or Bent— Stacking — Special Lengths
— Various Sizes, #10 to 1/2"— Multiple Hole Sizes and Spacing— Special Locations
— Three Standard Lengths:Short, Standard and Long
— Custom Lengths
With Dependable PANDUIT ® Service• Excellent Quality
• Fast Delivery
• Low Minimum Order Quantities
• Competitive Prices
CodeConductor
Size
LocomotiveFlex
ConductorSize
FlexConductor
Size
Barrel
I.D.
Barrel Length Nominal Stud Size
#10O.D. Short Standard Long 1/4 5/16 3/8 1/2
Tongue Width
#8
#6
#4
#2
#1
1/0
2/0
3/0
4/0
250
37/24
61/24
105/24
—
150/24
225/24
275/24
325/24
450/24
550/24
—
#6
#4
—
#2
#1
1/0
2/0
3/0
4/0
.18
.22
.28
.31
.36
.39
.45
.51
.57
.63
.27
.31
.38
.42
.47
.52
.58
.64
.71
.77
.42 .56 .70
.48 .81 1.07
.53 .81 1.05
.57 .88 1.16
.59 .88 1.36
.66 .94 1.44
.72 .98 1.50
.83 1.14 1.50
.91 1.19 1.56
1.03 1.25 1.61
.41 .48 .56 .60 —
.45 .48 .56 .62 —
.55 .62 —
.60 .66 .75
.70 .75
.76 .80
.85
.96
1.06
1.17
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F111
Custom Lugs Spec Sheet InstructionsUse these instructions to design your own custom lugs. Fill in the Custom LugsPreliminary Spec Sheet to place your custom lugs order. You can copy the sheet frompage F112 or download it at www.panduit.com/customlugs.
1. Fill out this section completely.
2. Check the conductor size and type (Code or Flex). Fill in the strand designation and type for flex conductor.
3. Check a barrel length. Refer to Chart “A” for standard barrel length dimensions. If the length you require isnot listed, fill in the special box with your required length.
4. Check “YES” if an inspection hole is required; check “NO” if it is not required.
5. Check the barrel end type you require.
6. Check a stud size and tongue style (one-hole, two-hole or blank). Refer to Chart “A” and Chart “B” for standard tongue dimensions. If you require tongue dimensions other than those listed, fill in the box that corresponds to the feature that requires a special dimension. You must fill in a hole spacing on two-hole lugs and tongue length on blank tongue lugs.
NOTE: Steps 7 and 8 are for bent or stacking lugs ONLY.
7. Check the stacking lug you require. If both upper and lower lugs are required, check “both”.(2 drawings will be provided.) If you choose a bent stacking lug, fill in the required angle.
8. Check the bent lug you require. If you check “special angle”, fill in the required angle.
9. Check the special options you require. Fill in any blank lines that correspond to the option you’ve selected.
10. Fax or mail the completed spec sheet to PANDUIT ® Corp. Address and phone/fax numbers arelisted on the bottom of the Custom Lugs Preliminary Spec Sheet (see page F112 or go towww.panduit.com/customlugs). PANDUIT ® will send drawings for your approval.
Custom Lugs Preliminary Spec SheetPhotocopy this form to place your order. This form is also available at www.panduit.com/customlugs.Mail or fax the photocopy to receive drawings and quotation. Place your order through your local PANDUIT ® distributor.
2 CONDUCTOR
#8#22/0
250Kcmil
#6#13/0
Special
#41/04/0
CodeFlex
{ StrandsType
3 BARREL LENGTH 4 INSPECTION HOLE 5 BARREL END TYPE
SPECIAL
LONG
STANDARD
SHORT
INSPECTION HOLE
YES NO
STANDARD
CORONA RELIEF
FLARED
6 TONGUE SPECIFICATIONS (Standard Dimensions apply to boxes left blank— See Charts “A” & “B”)Stud Sizes
#105/161/2
1/43/8
Other One-Hole Two-Hole Blank
7 STACKING LUG SELECTION (If not needed — proceed to Step 8)Lugs With 0° to 45° Angles
Angle
C
8 BENT LUG SELECTION (If not needed — proceed to Step 9)
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F113
Code Conductor, One-Hole, Aluminum Lug
• Manufactured from high conductivity thick wall wrought aluminum• Factory pre-filled with joint compound and sealed with easy
pull-out end plug to inhibit corrosion• Color coded end plug and PANDUIT ® and specified competitor die
index numbers marked on barrel for proper crimp die selection
• Enclosed barrel prevents corrosive material from entering barrelwhen used in harsh environments
• Tin plated to inhibit corrosion • UL Listed for use up to 35KV**, temperature rated 90°C and CSA
Certified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
‡See pages L40, L41 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.See pages H33, F118 for PANDUIT ® joint compounds recommended for pad to pad and conductor connections.
W
T
B
L
For Use with Stranded Aluminum or Copper Code Conductors
F114 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Code Conductor, Two-Hole, Aluminum Lug
• Manufactured from high conductivity thick wall wrought aluminum• Factory pre-filled with joint compound and sealed with easy pull-
out end plug to inhibit corrosion• Color coded end plug and PANDUIT ® and specified competitor die
index numbers marked on barrel for proper crimp die selection• Enclosed barrel prevents corrosive material from entering barrel
when used in harsh environments
• Tin plated to inhibit corrosion • UL Listed for use up to 35KV**, temperature rated 90°C and CSA
Certified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
• Available with NEMA hole sizes and spacing
‡See pages L40, L41 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.See pages H33, F118 for PANDUIT ® joint compounds recommended for pad to pad and conductor connections.◆NEMA hole sizes and spacing
W
HOLESPACING
L
T
B
For Use with Stranded Aluminum or Copper Code Conductors
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). F115
Belleville Compression Washers
• Conical spring washer for use when assembling aluminum connectors to copperand/or steel pads, compensates for differingrates of thermal expansion to keep hardwareassembly from loosening
• Made from hardened steel to providehigh strength
• Cadmium plated to inhibit corrosion
D
T
H
Code Conductor, Aluminum Splice
• Manufactured from high conductivity thick wall wrought aluminum• Factory pre-filled with joint compound and sealed with easy pull-
out end plug to inhibit corrosion• Color coded end plugs and PANDUIT ® and specified competitor
die index numbers marked on barrel for proper crimp die selection
• Tin plated to inhibit corrosion• Internal solid center prevents over-insertion of conductor• UL Listed for use up to 35KV**, temperature rated 90°C and CSA
Certified to 600V when crimped with PANDUIT ® and specifiedcompetitor crimping tools and dies
‡See pages L40, L41 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.See pages H33, F118 for PANDUIT ® joint compounds recommended for pad to pad and conductor connections.
For Use with Stranded Aluminum – to – Aluminum or Copper – to – Copper Conductors
Part Number Stud Hole Size (In.)
Figure Dimensions (In.)Std.Pkg.Qty.D H T
CW-14-L 1/4 .68 .09 .05 50
CW-56-L 5/16 .81 .08 .06 50
CW-38-L 3/8 .93 .10 .07 50
CW-12-Q 1/2 1.18 .12 .09 25
CW-58-Q 5/8 1.49 .15 .12 25
Type SA
Type CW
Type SAR
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
F116 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Code Conductor, Aluminum Reducing Splice
• Dual rated for use with aluminum or copper conductors• Factory pre-filled with joint compound and sealed with easy
pull-out end plug to inhibit corrosion• Color coded end plug and PANDUIT ® and specified competitor die
index numbers marked on barrel for proper crimp die selection
• Tin plated to inhibit corrosion• For use up to 35KV** and temperature rated 90°C when crimped
with PANDUIT ® and specified competitor crimping tools and dies
‡See page L36 in Technical Info section for tool and die information.**Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 volts.See pages H33, F118 for PANDUIT ® joint compounds recommended for pad to pad and conductor connections.
O.D.
L
For Reducing Stranded Aluminum – to – Aluminum or Aluminum – to – Copper Conductors
• Factory pre-filled with joint compound and sealed with easy pull-out end plug to inhibit corrosion
• Color coded end plug and PANDUIT ® die index number markedon barrel for proper crimp die selection
• Insulating rubber sleeve included to insulate aluminum barrel fromcontact with copper connector when attached to pin
• Tin plated to inhibit corrosion• UL Listed per UL 486B; temperature rated 90°C and for use up to
600V when crimped with PANDUIT ® and specified competitorcrimping tools and dies
‡See pages L38, L39 in Technical Info section for tool and die information.See pages H33, F118 for PANDUIT ® joint compounds recommended for pad to pad and conductor connections.
Provides Copper Pigtail for Connecting Aluminum Conductors to a Copper or Aluminum/Copper RatedMechanical Lug
Type BPC
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
F118 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Code Conductor, Aluminum HTAP
• Dual rated — used to tap into continuous runs of aluminum conductor with either aluminum or copper tap conductor
• Factory pre-filled with joint compound to inhibit corrosion• Conductor range for each tap groove and die index number
marked on barrel to identify proper conductor size and crimp die to be used
• Made from high conductivity, high strength aluminum to providepremium mechanical and electrical performance
• For use up to 600V and 90°C temperature rated when crimpedwith PANDUIT ® crimping tools and dies
‡See page L37 in Technical Info section for tool and die information.See page F106 for Type TAPC HTAP covers.See below for PANDUIT ® joint compounds recommended for pad to pad and conductor connections.
H
L W
Part Number
Conductor SizeFigure Dimensions
(In.)PANDUIT ®
Die IndexNo.‡
Wire StripLength
(In.)
Std.Pkg.Qty.Run Tap L W H
HTAP2-8-L #2 – #6 AWG STR or #1 – #6 AWG SOL
#8 – #14 AWG STR or #7 – #14 AWG SOL
.75 .56 .73 P50 1 7/8 50
HTAP1-1-Q #1 – #6 AWG STR or #2 – #6 AWG SOL
#1 – #6 AWG STR or #2 – #6 AWG SOL
1.50 .70 1.10 P0 1 5/8 25
HTAP1/0-1-Q 1/0 – #6 AWG STR or #2 – #6 AWG SOL
#1 – #6 AWG STR or #2 – #6 AWG SOL
1.50 .70 1.17 P0 1 5/8 25
HTAP2/0-1-Q 2/0 – #2 AWG STR or #2 AWG SOL #1 – #6 AWG STR or #2 – #6 AWG SOL
1.50 .70 1.17 P0 1 5/8 25
HTAP3/0-1-Q 3/0 – 1/0 AWG STR or 4/0 – 3/0 AWG SOL
#1 – #6 AWG STR or #2 – #6 AWG SOL
1.50 .88 1.39 PD or PD3 1 5/8 25
HTAP3/0-3/0-Q 3/0 – 1/0 AWG STR or 4/0 – 3/0 AWG SOL
3/0 – 1/0 AWG STR or 4/0 – 3/0 AWG SOL
1.88 .90 1.48 PD or PD3 2 25
HTAP4/0-2-Q 4/0 – 3/0 AWG STR #1 – #6 AWG STR or #2 – #6 AWG SOL
For Combinations of Aluminum – to – Aluminum or Aluminum – to – Copper Code Conductors
Joint Compounds
• Oxide inhibitor for compression conductor connections made withaluminum compression connectors lowers electrical contactresistance of compression joint while sealing out air and moistureto prevent the formation of surface oxides
• Wide operating temperature range; can be used in a wide rangeof electrical and environmental conditions
• Non-toxic• Non-flammable• Packaged in convenient 8 oz. dispenser bottles
Part Number Part Description
Std.Pkg.Qty.
CMP-100-1 Contact aid for pad-to-pad or thread-to-thread aluminum connections. Operating temperaturerange -60°F(-51°C) to 400°F (204°C). Maintains low electrical resistance and seals out air andmoisture to prevent the formation of surface oxides.
1
CMP-200-1 Contact aid for cable connections with compression connections made on aluminum conductor.Operating temperature range -40°F (-40°C) to 400°F (204°C). Lowers contact resistance ofcompression joint and seals out moisture and air to prevent the formation of surface oxides.Compatible with all insulating materials.
1
Type CMP
Type HTAP
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). G1
CCRRIIMMPPIINNGG TTOOOOLLSS
PANDUIT ® offers a wide range of tools to provide solutions for installing terminals, disconnects,splices and lugs. PANDUIT ® installation tools provide quality performance, ease of installationand lowest installed cost.The long-term reliability of PANDUIT ® installation tools provides thehighest level of service to meet and surpass customer requirements.
• Ergonomic design to minimize operator effort
• Compression tools provide UL Listed and CSA Certifiedterminations with PANDUIT ® electrical connectors,as noted
• Compression tools feature controlled cycle mechanisms ensuring reliability and repeatability inevery crimp made
• Crimping dies are color coded to easily match theelectrical connector to the proper die
PANDUIT ® tools are available in an assortment of styles including manually operated mechanicaland hydraulic, battery operated hydraulic, AC powered hydraulic and pneumatic to meet a varietyof installation needs. Hand operated CONTOUR CRIMP ™ Controlled Cycle Crimping Tools featureergonomically designed cushioned grips and low handle effort. UNI-DIE ™ Dieless Crimping Toolscrimp a variety of sizes and eliminate the need to purchase crimping dies. Fully self-containedbattery powered crimping tools provide the ease of push button crimping. PANDUIT ® crimpingtools are designed for use with PANDUIT ® electrical connectors, providing the right solution foryour termination needs.
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
G2
Index
NOTES for Crimping with Hand Operated Controlled Cycle Crimping Tools:1. PANDUIT ® controlled cycle crimping tools properly locate rings, forks, barrel insulated and non-insulated disconnects, pins, and blades. No further
positioning is required.2. Once a crimp has been started, the ratchet device of controlled cycle tools will not release until the crimp is complete, independent of operator expertise.3. Controlled cycle tools provide the electrical crimp and the insulation closure in a single cycle of the tool.4. When using controlled cycle tooling, insulated butt splices must be inserted from the back of the tool to ensure that the electrical and insulation closure
crimp pockets are properly aligned with the splice.
together, and insert wires into wire joint.2. Locate wire joint in proper crimp die and position
crimp pocket in the center of the metal insert.3. Squeeze tool handles firmly (See Note 2 below).
Insulated and Non-InsulatedParallel Splices1. Locate parallel splice in proper crimp die and
position crimp pocket on the center of themetal insert.
2. Insert properly stripped wires into opposite ends of the splice so that the stripped portions of the wire overlap inside the metal insert.
3. Squeeze tool handles firmly (See Note 2 below).
Insulated Butt Splices1. Locate butt splice in proper size crimp die and
position crimp pocket halfway between the wirestop (center of splice) and the wire stop end ofthe insulation crimp area, as shown(See Note 4 below).
2. Insert properly stripped wire into one end ofbutt splice.
3. Squeeze tool handles firmly (See Note 2 below).4. Provide second crimp in the insulation crimp area
to close the insulation (See Note 3 below).5. Repeat steps 1–4 for opposite end of butt splice.
Non-Insulated Butt Splices1. Locate butt splice in proper size crimp die and
position crimp pocket halfway between the wire stop and the butt splice end, as shown.
2. Insert properly stripped wire into one end of the butt splice.
3. Squeeze tool handles firmly. (See Note 2 below).4. Repeat 1–3 for opposite end of butt splice.
Insulated Terminals and Disconnects1. Locate terminal in proper size crimp die with
edge of die 1/16" from the tongue end of theinsulation sleeve (See Note 1 below). Ensure thatcrimp is perpendicular to the plane of the terminaltongue, as shown.
2. Insert properly stripped wire into terminal until aminimum of 1/32" of conductor extends beyondthe terminal barrel.
3. Squeeze tool handles firmly (See Note 2 below).4. Provide second crimp in the insulation crimp area
to close the insulation (See Note 3 below).
Non-Insulated Terminals and Disconnects1. Locate terminal in proper crimp die with indenter
centered on brazed barrel seam (for short lockingforks, locate indenter opposite butted barrel seam). Ensure that crimp is perpendicular to the plane of the terminal tongue, as shown(See Note 1 below).
2 . Insert properly stripped wire into terminal until aminimum of 1/32" of conductor extends beyond the terminal barrel.
3. Squeeze tool handles firmly (See Note 2 below).
INSULATIONCRIMP AREA
CRIMPDIRECTION
INDENTER SIDE(BUTTED SEAM)
INDENTER SIDE(BRAZED SEAM)
INSULATIONCRIMP AREACRIMP
WIRESTOP
BARREL LOCATION
CRIMP CRIMP
WIRE STOP
INSULATED
NON-INSULATED
CRIMP CENTEREDON METAL INSERT
NON-INSULATED
CRIMP CENTEREDON METAL INSERT
INSULATED
Crimping Guidelines for PANDUIT ® PAN-TERM ® Terminals, Disconnects,Splices and Wire Joints
*See Tool charts on pages L6 - L41
1. Select the proper PANDUIT ®
compression connector for theconductor type and size being used.
• PANDUIT ® compression connectors areidentified with the proper conductor size andconductor type marked on the tongue orbarrel of the connector
• PANDUIT ® compression connector packagingcomes complete with installation instructions thatinclude the properconductor size andtype to be used witheach connector
• This catalog includestool charts thatincorporate the properconductor size andtype to be used with each connector*
2. Strip the conductor to the proper striplength. As specified:
• On the PANDUIT ® productpackaging label or
• On the installation instructionsheet included with PANDUIT ®
product packaging or• In the tool charts in
this catalog*Make sure the conductor is not stripped too long,which would result in exposed wire between thebarrel of the connector and the cable insulation.Make sure the conductor is not stripped too short,which would result in a less than complete contactarea with the connector when the conductor isinserted in the barrel.Do not nick or cut strands of conductor duringcrimping, which would result in a less than premiumconductor termination.
Make sure conductor strands are freefrom corrosion.
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). G3
3. Select the proper crimp die andcrimping tool to be used withthe connector.
Use crimping tools and dies that provide a UL Listedand/or CSA Certified electrical termination, to assurea safe and reliable connection.Many PANDUIT ® compression connectors are ULListed and CSA Certified when crimped withPANDUIT ® and specified competitor crimping toolsand dies. These tools and dies are listed in the toolcharts in this catalog*. PANDUIT ® crimping tools anddies to be used with each connector are also listedon the instruction sheets included with PANDUIT ®
product packaging.PANDUIT ® compression connectors arecolor coded and marked with PANDUIT ®
and specified competitor die indexnumbers. Select the proper crimp die to beused by matching the color code and dieindex number marked on the connector tothe same markings on the crimp die.
4. Crimp the connector.Insert the conductor into the barrel of the connector.The conductor should stop against the end of thebarrel of the lug, or wire stop in the butt splice, upon
complete insertion of the conductor inthe barrel. Some lugs are offered withinspection windows that providevisual inspection of the completeconductor insertion.
Review the installation instructions included with thePANDUIT ® product packaging or the tool charts* forthe proper number of crimps to be placed in the
connector. Make the first crimpin the barrel nearest the tongueof the lug, or wirestop in a buttsplice, and makesuccessivecrimps in thebarrel working
towards the conductor entry at theend of the barrel. Use the color coded or knurledband markings on the barrel of the connector toevenly space the placement of the crimps inthe barrel.
When properly crimped, the die index numberengraved in the crimp die will be embossed intothe barrel of the connector. The crimp should beplaced in the connector so the die indexnumber can be easily read when the connectoris installed.
Crimping Guidelines for PANDUIT ® PAN-LUG ™ Compression Lugs and Splices
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
G4
Index
Crimping Guidelines for PANDUIT ® PAN-LUG ™ Copper HTAP and ClearCover System
HTAP Installation
Cover Installation
1. Locate desired position of HTAP along main wire run.Allow clearance for tap wires and cover installation.(See clear cover table on page F109.)
2. Strip insulation from wires to the length shown in theHTAP table on page F108. Use care to avoid damagingthe conductors.
3. Position wires in the appropriate tap grooves.
4. For easier installation, apply one of the flame retardantcable ties (provided) around the wires and through theslots in the HTAP. The head of the cable tie must be positioned along the side of the HTAP as shown inFigure A. Tension and cut off excess length of tie. Additional cable ties may be used adjacent to the HTAP tosecure the wires.
5. Install the correct dies (see page L35) into the crimping tool. NOTE: The color code and die index numbershown on the HTAP and crimp dies must match.
6. Position the HTAP in the crimp tool so that the entire HTAP will be compressed by the crimping surfaces of the diesin the proper direction. Crimp the connector.
7. After crimping, if desired, cut off the cable tie head or remove the entire cable tie. NOTE: In some cases, the cabletie head must be cut off in order for the crimped connector to fit inside the insulating cover.
1. If labels are being utilized, cut labels to the dimensionsshown below. NOTE: When using a PANDUIT ®
LS7 printer, the length dimensions can be easilyprogrammed to provide cutoff marks.
2. Position the label(s) in the pockets inside the cover andsnap in the label retainer(s) as shown in Figure B.Information can be marked on the matte finish labelretainers in lieu of using a separate label.
3. Position one cover half around the crimped connectorassembly. Align the second cover half with the first andsnap together.
4. Install the two flame retardant cable ties (provided) inthe grooved areas on the cover. Tension and cut offexcess lengths of ties.
Figure A
Figure B
Cover allows for a clearview of the label and
label protection
Non-adhesivelabel maybe used
Two labelretainersprovided
Pockets forcable tie heads
Guides forcable ties
Write-on surfaceon label retainer
Label pocketsprovided
Guides forcable ties
CrimpingDirection
NOTE: Configuration of cover may differslightly from illustration.
Clear CoverPart Number
CLRCVR1-1
CLRCVR2-1
CLRCVR3-1
CLRCVR4-1
CLRCVR5-1
CLRCVR6-1
.38 1.12 .69
.38 1.56 1.00
.38 1.87 1.25
.38 2.37 1.75
.38 3.37 2.06
.38 4.31 2.94
Label Height(Max.)
Label Length(Wrap Around
Style)Label Length(Flat Style)
Label Size Information
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). G5
Selection Guide — Compression Connector Tools
See Tool Charts on pages L6 - L41 for selection of crimp dies and number of crimps used with specific tool and connector combinations.
Selection Guide continues on page G6
Tool Selection Guide for Crimping PANDUIT ® Copper Compression Lugs and Splices for use with Copper Code Conductor
See Tool Charts on pages L6 - L41 for selection of crimp dies and number of crimps used with specific tool and connector combinations.
Tool Selection Guide for Crimping PANDUIT ® Aluminum Compression Lugs and Splices for use with Copper or Aluminum Code Conductor
ConductorType
ConnectorType Tool Type
Copper or Aluminum Conductor Range
#6AWG
#4AWG
#3AWG
#2AWG
#1AWG
1/0AWG
2/0AWG
3/0AWG
4/0AWG
250kcmil
300kcmil
350kcmil
400kcmil
500kcmil
600kcmil
750kcmil
800kcmil
1000kcmil
Copperor
AluminumCode
Conductor
LAALABSA
ManualCrimping
Tools
CT-1700(Pg. G9)
CT-720 (Pg. G11)
ManualHydraulicCrimping
Tool
CT-930 (Pg. G13)
BatteryPoweredHydraulicCrimping
Tools
CT-2931 (Pg. G17)
CT-2930 (Pg. G18)
CT-2940 (Pg. G19)
RemoteCrimpHeads
CT-930CH (Pg. G20)
CT-940CH (Pg. G21)
The Bottom Line:These ergonomically engineered crimping tools promote operator comfort and safety which lead to greaterproductivity. This provides the lowest installed cost.
Superior Locator
Superior BalanceControlled Cycle Mechanism
Cushioned Non-SlipGrip Material
Built-In Ratchet Device
Contoured Handles
“Two-Handed” Handle DesignNarrow Grip Span
Revolutionary Die Placement
Die Identifiers
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
G8
Index
Manual Hand Tools• Plier type
Reference crimping guidelines for PAN-TERM ® Terminals, Disconnects and Splices, see page G2.NOTE: Refer to Tool Selection Chart for specific crimp tool selection.
• Installer controlled crimp
CT-260
CT-200
CT-160
CT-100
Part Number Part Description
Std.Pkg.Qty.
CT-260 Forged steel tool. Crimps insulated and non-insulated terminals. Cuts wire.(See crimp tool section of product charts.)
1
CT-200 Forged steel tool. Crimps most PANDUIT ® #18 – #10 AWG non-insulated terminals,disconnects and splices. Cuts wire.(See crimp tool section of product charts.)
1
CT-160 Crimps most PANDUIT ® #26 – #10 AWG insulated and non-insulated terminalsdisconnects and splices. Cuts three U.S. and three Metric screw sizes. Cuts andstrips wire. Has insulation closure pocket.(See crimp tool section of product charts.)
1
CT-100 Crimps most PANDUIT ® #26 – #10 AWG insulated and non-insulated terminals,disconnects and splices. Cuts #4. #6. #8 and #10 screw sizes. Cuts and strips wire.Excellent all-around application tool of heat treated finished steel with comfortablecushioned plastic grip handles.(See crimp tool section of product charts.)
1
CONTOUR CRIMP ™ Controlled Cycle Tools• Specifically designed for the installation of PAN-TERM ® terminals,
disconnects and splices • Low handle effort — increases productivity
• Superior crimp performance • Reliable — backed by a two year warranty
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). G9
CONTOUR CRIMP ™ Controlled Cycle Tools• Specifically designed for the installation of
CT-1550 Crimps most PAN-TERM ® #22 – #10 AWG nylon and vinyl insulated terminals, splicesand disconnects. The CT-1550 has the red/blue pocket closest to the pivot whichprovides a reduced crimp effort for those who make red/blue terminations.
1
CT-1551 Crimps most PAN-TERM ® #22 – #10 AWG nylon and vinyl insulated terminals, splicesand disconnects. The CT-1551 has the yellow pocket closest to the pivot whichprovides a reduced crimp effort for those who make yellow terminations.
1
CT-1570 Crimps most PAN-TERM ® #22 – #10 AWG and .5-6.0 mm non-insulated terminals anddisconnects. Crimps PANDUIT #22 – #10 AWG and .5-6.0 mm non-insulated splices,and #10 AWG compression lugs.
1
CT-1700 Crimps PANDUIT ® #8 – #2 AWG non-insulated tubular terminals (S series), #8 – #1AWG copper lugs and splices, #6 – #4 AWG aluminum lugs and splices and CTAPFcopper taps for #14 – #3 AWG. Includes 5 position, color coded rotating die.
1
CT-1701 Crimps PANDUIT ® #10 – #2 AWG non-insulated large gauge ring terminal (P series). Crimps #8 – #1 AWG copper lugs and splices, and #6 – #4 AWGaluminum lugs and splices and #14 – #3 AWG CTAPF copper taps.Includes 5 position rotating die.
CT-1006 Crimps PANDUIT ® #1 AWG single wire vinyl insulated ferrule (DIN) and (French).#1 AWG non-insulated ferrules.
1
Controlled Cycle Crimping Tools – In-Line
CT-400 and CT-460
• Military specialty tools help meet militaryand nuclear test requirements
• In-line crimp action for greater dielectricstrength with uniform insulation compression
• Calibration-recalibration is possible formaintaining exact crimp dimensions
• High performance to help meet military andnuclear requirements
Part Number Part Description
Std.Pkg.Qty.
CT-400 Crimps #22 – #14 PANDUIT ® insulated terminals, disconnects and splices.Comes complete with carrying/storage case which includes tools for calibration.Has adjustable pre-load and emergency ratchet. Helps meet military andnuclear requirements.
1
CT-460 Crimps #16 – #10 PANDUIT ® insulated terminals, disconnects and splices.Has same features as CT-400 above.
1
Part Number Part Description
Std.Pkg.Qty.
CT-600 Pneumatic tool, 6 ft. air hose and carrying case. Does not include crimping heads(ordered separately).
1
CT-500CH Crimping head for most #22 – 14 insulated terminals, splices and disconnects. 1
CT-520CH Crimping head for most #22 – 14 insulated butted seam disconnects and #26 – 22insulated terminals.
1
CT-550CH Crimping head for most #22 – 10 insulated terminals and splices. 1
CT-570CH Crimping head for #22 – 10 non-insulated terminals, splices and disconnects. 1
PD-600 Positioning device (for bench mounting of CT-600) 1
FPC-600 Foot actuator operating air pressure: 80-100 psi .233 SCFM type of air: lubricated.Recommend using Norgren (Brand) #FLR222-012-043008 filter lubricator regulator.
1
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). G11
For proper crimp head selection, see pages L2, L3, L4 in Technical Info section of this catalog.
• Quickly crimps a variety of loose pieceterminals in a variety of wire sizes for mediumvolume production
• Versatile-interchangeable crimping heads letyou switch terminal types quickly to meetchanging production requirements. This tool,when used with only four crimp heads, cancrimp a full range of #26 thru #10 AWGinsulated and non-insulated terminal products
• Portable — the small size, ease of benchmounting and quick pneumatic connectionallow the tool to be moved from one workstation to another or to the work itself
Pneumatic Crimping Tool
Die Type, Manual, Crimping Tool
• High quality, durable tool construction provideslong term dependability
• Develops 6 tons of crimping force, crimpscopper compression lugs and splices up to500 kcmil
• Provides UL Listed and CSA Certifiedconnections on PANDUIT ® copper andaluminum lugs and splices andinsulated terminals
• Cushioned grips prevent hands from slippingon tool and reduce fatigue
• Uses single retention screw for fast and easydie change-over
• Uses color coded crimp dies to provide easymatching of crimp die to connector
• Embosses die index number on connectorbarrels to provide post crimp inspection
• Available with or without control cycle featureto meet specific applications
CT-720
Part Number Part Description
Std.Pkg.Qty.
CT-720 Manual crimping tool for UL Listed or Recognized and CSA Certified terminations ofPANDUIT ® PAN-LUG ™ copper compression lugs and splices for #8 AWG – 500 kcmilcopper code conductor and aluminum compression lugs and splices for #6 AWG –350 kcmil copper and aluminum code conductors. Provides UL Listed terminationsof PANDUIT ® PAN-TERM ® #8 – #2 AWG vinyl insulated terminals.
Color coded CD-720 crimp dies, carrying/storage case and controlled cyclemechanism must be purchased separately.
• Available with or without controlled cyclefeature to meet specific applications
• Kits available with three or full set of sevendies for crimping partial or full range ofconnector sizes
Part Number Part Description
Std.Pkg.Qty.
CT-720-7 Basic tool kit with seven dies.Includes:• Seven dies (CD-720-1 – 7) for installing #8 AWG – 500 kcmil
copper compression connectors• Carrying/storage case (C-720)
1
CT-720-7CC Controlled cycle tool kit with seven dies. Controlled cycle mechanismfactory installed on crimping tool.Includes:• Seven dies (CD-720-1 – 7) for installing #8 AWG – 500 kcmil
copper compression connectors• Carrying/storage case (C-720)
1
CT-720-3 Basic tool kit with three dies.Includes:• Three dies (CD-720-1 – 3) for installing #8 AWG – 250 kcmil
copper compression connectors• Carrying/storage case (C-720)
1
CT-720-3CC Controlled cycle tool kit with three dies. Controlled cycle mechanismfactory installed on crimping tool.Includes:• Three dies (CD-720-1 – 3) for installing #8 AWG – 250 kcmil
copper compression connectors• Carrying/storage case (C-720)
1
See pages L6 – L41 in Technical Info section for connector and tool selection information.
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). G13
Die Type, Manual Hydraulic, 14 Ton, Crimping Tool
Uses CD-920 and CD-930 color coded crimp dies. Dies must be purchased separately, see page G25.CG-920 crimp force measurement gauge available, sold separately see page G31.
• Copper compression lugs and splices for #8 AWG – 500 kcmil code conductor• Copper compression lugs for #8 AWG – 350 kcmil flex conductor• Copper compression CTAPF taps for #10 AWG – 3/0 AWG code conductor• Copper compression CTAP taps for #8 AWG – #2 AWG code conductor• Aluminum compression lugs and splices for #6 AWG – 300 kcmil code
conductor (not UL or CSA)• Aluminum compression HTAPS for #14 AWG – 4/0 AWG code
conductor (not UL or CSA)• PANDUIT ® PAN-TERM ® Tubular Terminals for #8 AWG – 250 kcmil code conductor
Specifications:Output: 6 tonsJaw opening: 1.8"Weight: 8.5 lbs. with batteryLength: 13"Height: 12"Width: 3"Warranty: 3 years on tool, 5 years on batteries
CT-2001 includes:• Tool• Two CT-NLBC25, 14.4 VDC rechargeable batteries (non-LED)• One CT-CHR25 battery charger• One shoulder strap• Plastic tool case with storage for batteries, charger, shoulder strap and crimp dies• Tool incorporates D3 die pocket (included with tool)
1
• Battery powered — provides fingertip operation• Self-contained unit — completely portable• Lightweight and ergonomically balanced for
easy operation without fatigue• Develops 6 tons of crimping force, crimps
copper compression lugs and splices upto 500 kcmil
• Provides UL Listed and CSA Certifiedconnections on PANDUIT ® PAN-LUG ™
copper lugs, splices and taps• Audible “pop-off” valve indicates
crimp completion• Tool provided with two, NiCd rechargeable
batteries and battery charger to allow forcontinuous operation
• High productivity — up to 80 crimps on500 kcmil copper lugs and splices on asingle battery charge
• Six to eight second crimp cycle time, providesquick terminations, saves time
• Battery charger charges expended batteriescompletely in 25 minutes
• Battery charger includes battery reconditionerfeature which prevents battery memorybuild-up and provides over 1,000 batteryrecharge cycles resulting in long life
• Uses color coded crimp dies to provide easymatching of crimp die to connector
• Embosses die index number on connectorbarrels to provide post crimp inspection
• Dies installed using spring loaded dieretention pins — no need for tools
• Crimp head rotates 180 degrees — providesversatility for use in restricted spaces
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). G15
Die Type, Battery Powered Hydraulic, 6 Ton, Crimping Tool with Open "C-Head"
Uses color-coded CD-2001 crimp dies. Dies must be purchased separately, see page G16.For battery charger and battery accessories, see page G32.
• Battery powered — provides fingertip operation• Self-contained unit — completely portable• Lightweight and ergonomically balanced for
easy operation without fatigue• Develops 6 tons of crimping force, crimps
copper compression lugs and splices up to500 kcmil
• Provides UL Listed and CSA Certifiedconnections on PANDUIT ® PAN-LUG ™ copperlugs, splices and taps
• Open “C-Head” design allows easy loading of crimp dies and connectors, saves time
• Rubber boot on crimp head providesabrasion protection
• Tool provided with two, NiCd rechargeablebatteries and battery charger to allow forcontinuous operation
• High productivity — up to 80 crimps on500 kcmil copper lugs and splices on asingle battery charge
• Six to eight second crimp cycle time, providesquick terminations, saves time
• Battery charger charges expended batteriescompletely in 25 minutes
• Batteries include LED battery chargeindicators for visual indication of currentbattery charge
• Battery charger includes battery reconditionerfeature which prevents battery memorybuild-up and provides over 1,000 batteryrecharge cycles resulting in long life
• Uses color coded crimp dies to provide easymatching of crimp die to connector
• Embosses die index number on connectorbarrels to provide post crimp inspection
• Dies installed using spring loaded dieretention pins — no need for tools
• Crimp head rotates 180 degrees — providesversatility for use in restricted spaces
• Copper compression lugs and splices for #8 AWG – 500 kcmil code conductor• Copper compression lugs for #8 AWG – 350 kcmil flex conductor• Copper compression CTAPF taps for #10 AWG – 3/0 AWG code conductor• Copper compression CTAP taps for #8 AWG – #2 AWG code conductor• Aluminum compression lugs and splices for #6 AWG – 300 kcmil code
conductor (not UL or CSA)• Aluminum compression HTAPS for #14 AWG – 4/0 AWG code
conductor (not UL or CSA)• PANDUIT ® PAN-TERM ® Tubular Terminals for #8 AWG – 250 kcmil code conductor
Specifications:Output: 6 tonsJaw opening: .95"Weight: 9.0 lbs. with batteryLength: 13"Height: 12"Width: 3"Warranty: 5 years tool, 1 year on batteries
CT-2002 includes:• Tool• Two CT-BC25, 14.4 VDC rechargeable batteries with LED display• One CT-CHR25 battery charger• One shoulder strap• Plastic tool case with storage for batteries, shoulder strap and crimp dies• Tool incorporates D3 die pocket (included with tool)
1
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
G16 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
CD-2001 and CDM-2001 Crimping Dies
• Color coded to provide easy matching to colorcoding marked on connectors
• Embosses die index number on connectorbarrels to provide post crimp inspection
• Part number permanently marked on crimpdie for easy identification
CD-2001-300 300 kcmil White P66 4/0 AWG White P66 1
CD-2001-350 350 kcmil Red P71 250 kcmil Red P71 1
CD-2001-400 400 kcmil Blue P76 300 kcmil Blue P76 1
CD-2001-500 500 kcmil Brown P87 — — 1
Part Number
Used to Install PANDUIT ® Tap Part NumbersStd.Pkg.Qty.Copper Tap Die Color & No. Aluminum Tap
Single Crimp DiesCD-2001-8 CTAPF10-16-C Red P21 — 1
CD-2001-6 CTAPF8-12-C Blue P24 — 1
CD-2001-4 CTAPF6-12-C Gray P29 — 1
CD-2001-2 CTAPF4-12-C Brown P33 — 1
CD-2001-1 CTAPF3-12-C Green P37 — 1
CD-2001-1/0 CTAPF2-12-C Pink P42 — 1
CD-2001-2/0 CTAPF1-12-C Black P45 — 1
CD-2001-3/0 CTAPF1/0-12-L Orange P50 HTAP2-8-L 1
CD-2001-4/0 CTAPF2/0-12-Q Purple P54 — 1
CD-2001-250 CTAPF3/0-12-Q Yellow P62 — 1
CD-2001-BG CTAP4-4-L to CTAP4-8-L PBG — 1
CD-2001-C CTAP2-4-Q to CTAP2-2-X PC — 1
CD-2001-O — Green PO HTAP1-1-Q to HTAP2/0-1-Q 1
Multi-Crimp DiesCDM-2001-2 CTAPF4-12-C Brown P33M — 1
CDM-2001-1 CTAPF3-12-C Green P37M — 1
CDM-2001-1/0 CTAPF2-12-C Pink P42M — 1
CDM-2001-2/0 CTAPF1-12-C Black P45M — 1
CDM-2001-3/0 CTAPF1/0-12-L Orange P50M — 1
See pages L6 – L41 in Technical Info section for connector and tool selection information.
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). G17
Die Type, Battery Powered Hydraulic, 12 Ton, Crimping Tool
• Battery powered — provides fingertip operation
• Self-contained unit — completely portable• Develops 12 tons of crimping force, crimps
copper compression lugs and splices up to750 kcmil
• Two stage rapid advance hydraulic systemminimizes cycle time
• Provides UL Listed and CSA Certifiedconnections on PANDUIT ® PAN-LUG ™
copper and aluminum lugs and splices andcopper taps
• Open “C-Head” design allows easy loading ofcrimp dies and connectors, saves time
• Rubber boot on crimp head provides abrasion protection
• Ram automatically retracts when crimp cycle is complete
• Tool provided with two, high capacity 12 VDCrechargeable nickel-metal hydride batteries —provides for continuous operation andeliminates “memory” build-up, one hour charge time
• Eight second crimp cycle time provides quickterminations, saves time
• Uses industry standard Makita* batteries andcharger — industry proven reliability easy toobtain from local retail sources
• Uses color coded crimp dies to provide easymatching of crimp die to connector
• Embosses die index number on connectorbarrels to provide post crimp inspection
• Dies installed using spring loaded die retentionpins — no need for tools
• Crimp head rotates 360 degrees — providesversatility for use in restricted spaces
Uses CD-920 and CD-930 color-coded crimp dies. Dies must be purchased separately, see page G25.CG-920 crimp force measurement gauge available, sold separately, see page G31.
*Makita is a registered trademark of Makita Corporation in the United States.
• Copper compression lugs and splices for #8 AWG – 750 kcmil code conductor• Copper compression lugs and splices for #8 AWG – 600 kcmil flex conductor• Copper compression CTAPF taps for #10 AWG – 3/0 AWG code conductor• Copper compression CTAP taps for #8 AWG – 4/0 AWG code conductor• Copper compression HTCT taps for #14 AWG – 250 kcmil code conductor,#14 AWG – 4/0 AWG flex conductor
• Aluminum compression lugs and splices for #6 AWG – 600 kcmil code conductor• Aluminum compression HTAPS for #14 AWG – 500 kcmil code conductor• PANDUIT ® PAN-TERM ® Tubular Terminals for #8 AWG – 250 kcmil code conductor
Specifications:Output: 12 tonsJaw opening: 1.65"Weight: 15.2 lbs with batteryLength: 15 5/8"Height: 12"Width: 3 3/16"Warranty: 3 years
CT-2931 includes:• Tool• Two 12 VDC, rechargeable NiMH batteries• One battery charger• Steel tool case with storage for batteries, charger and crimp dies
1
CT-ACADPT A.C. Adapter provides continuous operation of crimping tool using 120 VAC60Hz available outlet. Incorporates 16.5' power cord which provides mobility oftool operation.
1
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
G18 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Die Type, Battery Powered Hydraulic, 14 Ton, Crimping Tool
Uses CD-920 and CD-930 color-coded crimp dies. Dies must be purchased separately, see page G25.CG-920 crimp force measurement gauge available, sold separately, see page G31. For battery charger andbattery accessories, see page G32.
• Battery powered — provides fingertip operation• Self-contained unit — completely portable• Develops 14 tons of crimping force, crimps
copper compression lugs and splices up to750 kcmil
• Provides UL Listed and CSA Certifiedconnections on PANDUIT ® PAN-LUG ™ copperand aluminum lugs and splices andcopper taps
• Open “C-Head” design allows easy loading ofcrimp dies and connectors, saves time
• Rubber boot on crimp head providesabrasion protection
• Tool provided with two, NiCd rechargeablebatteries and battery charger allows forcontinuous operation
• High productivity — up to 50 crimps on500 kcmil copper lugs and splices on a singlebattery charge
• Eight second crimp cycle time provides quickterminations, saves time
• Battery charger charges expended batteriescompletely in 25 minutes
• Batteries include LED battery chargeindicators for visual indication of currentbattery charge
• Battery charger includes battery reconditionerfeature which prevents battery memorybuild-up and provides over 1,000 batteryrecharge cycles resulting in long life
• Uses color coded crimp dies to provide easymatching of crimp die to connector
• Embosses die index number on connectorbarrels to provide post crimp inspection
• Dies installed using spring loaded dieretention pins, no need for tools
• Crimp head rotates 180 degrees, providesversatility for use in restricted spaces
Specifications:Output: 14 TonsJaw opening: 1.65"Weight: 17.5 lbs with batteryLength: 16"Height: 12"Width: 3"Warranty: 5 years tool, 1 year on batteries
CT-2930 includes:• Tool• Two CT-BC25, 14.4 VDC rechargeable batteries with LED display• One CT-CHR25 battery charger• One shoulder strap• Plastic tool case with storage for batteries, charger, shoulder strap and crimp dies
1
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). G19
Die Type, Battery Powered Hydraulic, 15 Ton, Crimping Tool
Uses CD-920 and CD-930 color-coded crimp dies with CD-940-DA die adapter.Uses CD-940 color-coded crimp dies.Dies and die adapter must be purchased separately, see pages G25 and G26.For battery charger and battery accessories, see page G32.
• Battery powered — provides fingertip operation• Self-contained unit — completely portable• Develops 15 tons of crimping force, crimps
copper compression lugs and splices up to1,000 kcmil
• Provides UL Listed and CSA Certifiedconnections on PANDUIT ® PAN-LUG ™ copperand aluminum lugs and splices andcopper taps
• Flip-top crimp head design allows easyloading of crimp dies and connectors,saves time
• Rubber boot on crimp head providesabrasion protection
• Tool provided with two, NiCd rechargeablebatteries and battery charger, allows forcontinuous operation
• High productivity — up to 35 crimps on500 kcmil copper lugs and splices on a singlebattery charge
• Eight second crimp cycle time provides quickterminations, saves time
• Battery charger charges expended batteriescompletely in 25 minutes
• Batteries include LED battery chargeindicators for visual indication of currentbattery charge
• Battery charger includes battery reconditionerfeature which prevents battery memorybuild-up and provides over 1,000 batteryrecharge cycles resulting in long life
• Uses color coded crimp dies to provide easymatching of crimp die to connector
• Embosses die index number on connectorbarrels to provide post crimp inspection
• Dies installed using spring loaded dieretention pins — no need for tools
• Crimp head rotates 180 degrees — providesversatility for use in restricted spaces
Specifications:Output: 15 tonsJaw opening: 2"Weight: 24.25 lbs. with batteryLength: 21"Height: 10.5"Width: 3.75"Warranty: 5 years tool, 1 year on batteries
CT-2940 includes:• Tool• Two CT-BC25, 14.4 VDC rechargeable batteries with LED display• One CT-CHR25 battery charger• Shoulder strap• Plastic case for storage of crimp dies• Plastic tool case with storage for batteries, charger, shoulder strap and crimp die
storage case
1
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
G20 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Die Type, Remote Hydraulic, 14 Ton, Crimp Head
Uses CD-920 and CD-930 color-coded crimp dies.Dies must be purchased separately, see page G25.*CT-901 RCH remote control handle available, offering one hand operation of crimp head with PANDUIT ® CT-901HP hydraulic pump and CT-900HPH hose, sold separately, see page G22.CG-920 crimp force measurement gauge available, sold separately, see page G31.
• Develops 14 tons of crimping force when usedwith 10,000 psi hydraulic pump and hose,crimps copper compression lugs and splicesup to 750 kcmil
• Incorporates Parker type quick-connect fittings— eases installation and saves time
• High quality, durable tool construction provideslong-term dependability
• Provides UL Listed and CSA Certifiedconnections on PANDUIT ® PAN-LUG ™ copperand aluminum lugs and splices andcopper taps
• Open “C-Head” design allows easy loading ofcrimp dies and connectors, saves time
• Uses color coded crimp dies to provide easymatching of crimp die to connector
• Embosses die index number on connectorbarrels for post crimp inspection
• Dies installed using spring loaded dieretention pins — no need for tools
• Cast in handle allows crimp head to bemounted in a bench vice
CT-930CH includes:• Tool• Steel tool case• Supplied with female Parker type quick-connect fitting assembled to tool
1
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). G21
Die Type, Remote Hydraulic, 15 Ton, Crimp Head
Uses CD-920 and CD-930 color-coded crimp dies with CD-940-DA die adapter. Uses color-coded CD-940crimp dies. Crimp dies and die adapter must be purchased separately, see pages G25 and G26.CG-940 crimp force measurement gauge available, sold separately, see page G31.*CT-901RCH remote control handle available, offering one hand operation of crimp head with PANDUIT ®
CT-901HP hydraulic pump and CT-900HPH hose, sold separately, see page G22.
• Develops 15 tons of crimping force when usedwith 10,000 psi hydraulic pump and hose,crimps copper compression lugs and splicesup to 1,000 kcmil
• Incorporates Parker type quick-connect fittings— eases installation and saves time
• High quality, durable tool construction provideslong-term dependability
• Provides UL Listed and CSA Certifiedconnections on PANDUIT ® PAN-LUG ™ copperand aluminum lugs and splices andcopper taps
• Open “C-Head” design allows easy loading ofcrimp dies and connectors, saves time
• Uses color coded crimp dies to provide easymatching of crimp die to connector
• Embosses die index number on connectorbarrels for post crimp inspection
• Dies installed using spring loaded dieretention pins, no need for tools
• Cast in handle allows crimp head to bemounted in a bench vice
CT-940CH includes:• Tool• Steel tool case• Supplied with female Parker type quick-connect fitting assembled to tool
1
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
G22 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Hydraulic Pump and Accessories, Electric, 10,000 PSI
Contact PANDUIT ® Technical Assistance for use in production environments.*For information on crimp heads, see pages G20, G21 and G30.
• Develops 10,000 psi of hydraulic pressure• Easy to operate using manual switch or
remote pendant supplied; or optionalCT-901RFS foot switch or CT-901RCH remotecontrolled handle
• Factory set relief valve — pump stops whencrimp is complete
• Convenient 120 VAC operation• Incorporates Parker type quick-connect fittings
— eases installation and saves time• Versatile — can be used with PANDUIT ®
CT-930CH, CT-940CH or CT-980CHcrimp heads
CT-901HP
CT-900HPH
CT-901RCH
CT-901RFS
Part Number Part Description
Std.Pkg.Qty.
CT-901HP Hydraulic pump. Develops 10,000 PSI output. Pump shuts off when cycle iscomplete. Will not release until down switch is activated. Compatible with CT-900HPH hydraulic hose, CT-930CH, CH-940CH and CT-980CH crimp heads sold separately.*
Specifications:Pump output: 10,000 psiTank capacity: 2.5L incorporates sight gage for visual inspection of fluid level.Fluid type: Aero Shell #4 or equalMotor: 120 VAC 50/50Hz Current: 6.5 ampsHorsepower: 1/2 hpWeight: 34 lbs.Length: 7"Height: 14"Width: 6"Warranty: 5 years
CT-901HP pump includes:• On/off pendant switch on 10' electric cord• 3 prong A/C plug on 10' electric cord• Supplied with female Parker type quick-connect fitting assembled to pump
1
CT-900HPH Electrically non-conductive 10' hose compatible with PANDUIT ® CT-901HP hydraulic pump and CT-930CH, CT-940CH and CT-980CH crimp heads, suppliedpre-filled with hydraulic fluid for fast start up. Supplied with two male Parker typequick-connect fittings. Warranty: 5 years
1
CT-901RCH Remote control handle provides plastic carrying handle incorporating on/offactivation switch that allows operator to hold crimp head and activate CT-901HPhydraulic pump with one hand. Use with PANDUIT ® remote hydraulic crimp headsCT-930CH, CT-940CH and CT-980CH. Equipped with 3/8" Parker type quick-connect coupler for attaching crimp heads to PANDUIT ® CT-900HPH hydraulic hose. Includes a 10', three wire control cable that can be directly connectedto the CT-901HP pump. Warranty: 5 years
1
CT-901RFS Dual electrical foot switch that allows convenient “hands free” operation of thePANDUIT ® CT-901HP or CT-8250HP electric hydraulic pumps used with PANDUIT ®
remote hydraulic crimp heads. Supplied with 10' electric cord that can be directlyconnected to PANDUIT ® hydraulic pumps. Warranty: 5 years
1
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). G23
Die Type, Remote Hydraulic, 10.5 Ton, Crimp Head
Uses CD-920 color-coded crimp dies. Dies must be purchased separately, see page G25.PG-1 in-line pressure gauge provides visual measurement of hydraulic output pressure, sold separately,see page G31.*For information on hydraulic pump and hose, see page G24.
• Low pressure system extends life of crimphead for high volume crimping applications
• Develops 10.5 tons of crimping force whenused with 7,500 psi hydraulic pump and hose,crimps copper compression lugs and splicesup to 250 kcmil
• Incorporates Parker type quick-connect fittings— eases installation and saves time
• High quality, durable tool construction and lowpressure hydraulic requirements provide long-term dependability and tool life
• Provides UL Listed and CSA Certifiedconnections on PANDUIT ® PAN-LUG ™ copperlugs and splices
• Open “C-Head” design allows easy loading ofcrimp dies and connectors, saves time
• Uses color-coded crimp dies to provide easymatching of crimp die to connector
• Embosses die index number on connectorbarrels for post crimp inspection
• Dies installed using spring loaded dieretention pins — no need for tools
• Cast in handle allows crimp head to bemounted in a bench vice
Part Number Part Description
Std.Pkg.Qty.
CT-930LPCH Remote hydraulic crimp head provides UL Listed or Recognized terminations ofPANDUIT ® PAN-LUG ™ copper compression lugs and splices for #8 AWG – 250 kcmilcopper code conductor.
Use with PANDUIT ® CT-8250HP hydraulic pump and CT-900LPHPH 10'hydraulic hose.*
CT-930LPCH includes:• Tool• Steel tool case• Supplied with male Parker type quick-connect fitting assembled to tool
1
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
G24 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Hydraulic Pump and Accessories, Electric, 7,500 PSI
*For more information on crimp heads, see pages G23 and G30.PG-1 in-line pressure gauge provides visual measurement of hydraulic output pressure, sold separately,see page G31.
• Develops 7,500 psi of hydraulic pressure• Easy to operate using manual switch or
remote pendant supplied; or optionalCT-901RFS foot switch
• Factory set relief valve — pump stops whencrimp is complete
• Convenient 120 VAC operation• Incorporates Parker type quick-connect fittings
— eases installation and saves time• Versatile — can be used with PANDUIT ®
CT-930LPCH or CT-980LPCH crimp heads
CT-8250HP
Part Number Part Description
Std.Pkg.Qty.
CT-8250HP Hydraulic pump. Develops 7,500 psi output. Pump shuts off when cycle is complete.Will not release until down switch is activated. Compatible with CT-900LPHPHhydraulic hose, CT-930LPCH, and CT-980LPCH crimp heads sold separately.*
Specifications:Pump output: 7,500 psiTank Capacity: 2.5L incorporates sight gauge for visual inspection of fluid levelFluid type: Aero Shell #4 or equalMotor: 120 VAC 50/50HzCurrent: 6.5 ampsHorsepower: 1/2 hpWarranty: 5 years
Weight: 34 lbs.Length: 7"Height: 14"Width: 6"
CT-8250HP pump includes:• On/off pendant switch on 10' electric cord• Three prong A/C plug on 10' electric cord• Supplied with male Parker type quick-connect fitting assembled to pump
1
CT-900LPHPH Electrically non-conductive 10' hose compatible with PANDUIT ® CT-901LPHPhydraulic pump and CT-930LPCH, and CT-980LPCH crimp heads, supplied pre-filledwith hydraulic fluid for fast start up. Supplied with two female Parker type quick-connect fittings. Warranty: 5 years
1
CT-901RFS Dual electrical foot switch that allows convenient “hands free” operation of thePANDUIT ® CT-901HP or CT-8250HP electric hydraulic pumps used with PANDUIT ®
remote hydraulic crimp heads. Supplied with 10' electric cord that can be directlyconnected to PANDUIT ® hydraulic pumps. Warranty: 5 years
1
CT-900LPHPH
CT-901RFS
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). G25
CD-920 and CDM-920 Crimping Dies
• Color coded for easy matching to color codingmarked on connectors
• Embosses die index number on connectorbarrels for post crimp inspection
• Part number permanently marked on crimp diefor easy identification
CG-980 crimp force measurement gauge available, sold separately, see page G31.
*Makita is a registered trademark of Makita Corporation in the United States.
• Dieless crimping tool design eliminatespurchase or lost crimp dies, saves cost
• Battery powered — providesfingertip operation
• Self-contained unit — completely portable• Develops 6.2 tons of crimping force with four
point indenter system, crimps coppercompression lugs and splices up to 750 kcmil
• Two stage rapid advance hydraulic systemminimizes cycle time
• Ram automatically retracts when crimp cycleis complete
• Tool provided with two, high capacity 12 VDCrechargeable nickel-metal hydride batteries —provides for continuous operation andeliminates “memory” build-up, one hourcharge time
• Uses industry standard Makita* batteries andcharger, industry proven reliability and easy toobtain from local retail sources
• Provides UL Listed and CSA Certifiedconnections on PANDUIT ® PAN-LUG ™ copperlugs and splices
• Provides UL Listed and CSA Certified wirerange-taking capability on PANDUIT ®
PAN-LUG ™ copper lugs and splices, minimizesconnector inventory and saves cost
• Flip-top crimp head design allows easyloading of splices, saves time
• Crimp head rotates 360 degrees, providesversatility for use in restricted spaces
Part Number Part Description
Std.Pkg.Qty.
CT-2981 Battery powered hydraulic UNI-DIE ™ dieless crimping tool provides UL Listed orRecognized and CSA Certified terminations of PANDUIT ® PAN-LUG ™ coppercompression lugs and splices for #4 AWG – 750 kcmil copper code conductor.Terminates PAN-LUG ™ aluminum compression lugs and splices for #6 AWG –500 kcmil copper and aluminum code conductor (not UL or CSA).
Specifications:Output: 6.2 tonsJaw opening: 1.46"Weight: 10.8 lbs. with batteryLength: 13"Height: 12"Width: 3"Warranty: 3 years
CT-2981 includes:• Tool• Two 12 VDC, NiMH rechargeable batteries• One battery charger • Steel tool case with storage for batteries, charger and crimp dies
1
SS-1 Test solder slugs 1SS-1GAGE Solder slug measurement gauge 1CT-ACADPT A.C. Adapter provides continuous operation of crimping tool using 120 VAC
60Hz available outlet. Incorporates 16.5' power cord which provides mobility oftool operation.
1
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). G29
CG-980 crimp force measurement gauge available, sold separately, see page G31. For battery charger andbattery accessories, see page G32.
• Dieless crimping tool design eliminatespurchase or lost crimp dies, saves cost
• Battery powered — providesfingertip operation
• Self-contained unit — completely portable• Develops 6.2 tons of crimping force with four
point indenter system, crimps coppercompression lugs and splices up to 750 kcmil
• Tool provided with two, NiCd rechargeablebatteries and battery charger, providescontinuous operation
• High productivity — up to 50 crimps on500 kcmil copper lugs and splices on a singlebattery charge
• Eight second crimp cycle time provides quickterminations
• Battery charger charges expended batteriescompletely in 25 minutes, saves time
• Batteries include LED battery chargeindicators to provide visual indication ofcurrent battery charge
• Battery charger provided with batteryreconditioner feature, prevents batterymemory build-up and provides over 1,000battery recharge cycles, resulting in long life
• Provides UL Listed and CSA Certifiedconnections on PANDUIT ® PAN-LUG ™ copperlugs and splices
• Provides UL Listed and CSA Certified wirerange-taking capability on PANDUIT ®
PAN-LUG ™ copper lugs and splices, minimizesconnector inventory and saves cost
• Flip-top crimp head design allows easyloading of crimp dies and connectors,saves time
• Crimp head rotates 360 degrees — providesversatility for use in restricted spaces
Part Number Part Description
Std.Pkg.Qty.
CT-2980 Battery powered hydraulic UNI-DIE ™ dieless crimping tool provides UL Listed orRecognized and CSA Certified terminations of PANDUIT ® PAN-LUG ™ coppercompression lugs and splices for #4 AWG – 750 kcmil copper code conductor.Terminates PAN-LUG ™ aluminum compression lugs and splices for #6 AWG –500 kcmil copper and aluminum code conductor (not UL or CSA).
Specifications:Output: 6.2 tonsJaw Opening: 1.46"Weight: 11.7 lbs. with batteryLength: 15.5"Height: 12"Width: 3"Warranty: 5 years
CT-2980 includes:• Tool• Two CT-BC25, 14.4 VDC rechargeable batteries with LED display• One CT-CHR25 battery charger• Shoulder strap• Plastic tool case with storage for batteries, charger, shoulder strap and crimp dies.
1
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
G30 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
UNI-DIE ™ Dieless, Remote Hydraulic, 6.2 Ton, Crimp Head
*CT-901RCH remote control handle available, offering one hand operation of crimp head with PANDUIT ®
CT-901HP hydraulic pump and CT-900HPH hose, sold separately, see page G22. CG-980 crimp force measurement gauge available, sold separately, see page G31.
• Dieless crimping tool design eliminatespurchase or lost crimp dies, saves cost
• Develops 6.2 tons of crimping force whenused with 10,000 psi hydraulic pump andhose, crimps copper compression lugs andsplices up to 750 kcmil
• Incorporates Parker type quick-connect fittings— eases installation and saves time
• Provides UL Listed and CSA Certifiedconnections on PANDUIT ® PAN-LUG ™ copperlugs and splices
• Provides UL Listed and CSA Certified wirerange-taking capability on PANDUIT ®
PAN-LUG ™ copper lugs and splices —minimizes connector inventory and saves cost
• Flip-top crimp head design allows easyloading of splices, saves time
Part Number Part Description
Std.Pkg.Qty.
CT-980CH Remote hydraulic UNI-DIE ™ dieless crimp head provides UL Listed or Recognizedand CSA Certified terminations of PANDUIT ® PAN-LUG ™ copper compression lugsand splices for #4 AWG – 750 kcmil copper code conductor. Terminates PAN-LUG ™
aluminum compression lugs and splices for #6 AWG – 500 kcmil copper andaluminum code conductor (not UL or CSA).
Use with hydraulic systems developing 10,000 PSI of hydraulic pressure.*
CT-980CH includes:• Tool• Steel tool case• Supplied with female Parker type quick-connect fitting assembled to tool
1
UNI-DIE ™ Dieless, Remote Hydraulic, 4.7 Ton, Crimp Head
Use with PANDUIT ® CT-8250HP hydraulic pump and CT-900LPHPH 10' hydraulic hose, see page G24.PG-1 in-line pressure gauge provides visual measurement of hydraulic output pressure, sold separately,see page G31.
• Low pressure system extends life of crimphead for high volume crimping application
• Dieless crimping tool design eliminatespurchase or lost crimp dies, saves cost
• Develops 4.7 tons of crimping force whenused with 7,500 psi hydraulic pump and hose,crimps copper compression lugs and splicesup to 250 kcmil
• Incorporates Parker type quick-connect fittings— eases installation and saves time
• Provides UL Listed and CSA Certifiedconnections on PANDUIT ® PAN-LUG ™ copperlugs and splices
• Flip-top crimp head design allows easyloading of splices, saves time
Part Number Part Description
Std.Pkg.Qty.
CT-980LPCH Remote hydraulic crimp head provides UL Listed or Recognized and CSA Certifiedterminations of PANDUIT ® PAN-LUG ™ copper compression lugs and splices for#4 AWG – 250 kcmil code conductor.
Specifications:Output: 4.7 tonsWeight: 6.5 lbs.Length: 10.5" with couplerHeight: 5.3"Width: 2.5"Warranty: 5 years
CT-980LPCH includes:• Tool• Steel tool case• Supplied with male Parker type quick-connect fitting assembled to tool
1
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). G31
Pressure Gauges• Provides easy visual reading of output force
for hydraulic crimping tools• Factory calibrated to provide accuracy and
quality assurance control of crimping tools inthe field
• Easy-to-read crimp force tolerance zone forapplicable tools marked on gauge
• Blank dies for fixture supplied with test gaugefor easy mounting and operation of gauge withcrimping tool
CG-920
CG-940
CG-980
PG-1
Part Number Part Description
Std.Pkg.Qty.
CG-920 Compression gauge — Used to measure crimping force generated by PANDUIT ®
crimping tools: CT-930, CT-930CH, CT-930LPCH, CT-2930 and CT-2931.
CG-920 includes:• Pressure gauge• Blank die set• Steel storage case• Warranty: 90 days
1
CG-940 Compression gauge — Used to measure output force generated by PANDUIT ®
crimping tools: CT-940CH and CT-2940.
CG-940 includes:• Pressure gauge• Blank die set• Steel storage case• Warranty: 90 days
1
CG-980 Compression gauge — Used to insure proper compression force for UNI-DIE ™
dieless tools: CT-980, CT-980CH, CT-2980 and CT-2981.
CG-980 includes:• Pressure gauge• Fixture for mounting gauge in crimp tool• Steel storage case• Warranty: 90 days
1
PG-1 In-line pressure gauge provides visual identification of hydraulic output pressurewhen used with PANDUIT ® CT-930LPCH and CT-980LPCH crimp heads,CT-8250HP pump and CT-900LPHPH hose. Includes steel storage case.Warranty: 90 days
1
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
G32 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Accessories for Battery Powered Hydraulic Crimping Tools
CT-BC25
CT-NLCBC25
Part Number Part Description
Std.Pkg.Qty.
CT-BC25 Rechargeable 14.4 volt DC NiCd battery with LED display to monitor remainingpower and number of charge cycles. Battery life is approximately 1,000 rechargecycles. Use with PANDUIT ® battery operated crimping tools: CT-2001, CT-2002,CT-2930, CT-2980 and CT-2940.Warranty: 1 year
1
CT-NLBC25 Rechargeable 14.4 volt DC NiCd battery without LED display. Battery life isapproximately 1,000 recharge cycles. Use with PANDUIT ® battery operated crimpingtools: CT-2001, CT-2002, CT-2930, CT-2980 and CT-2940.Warranty: 5 years
1
CT-CHR25 Battery charger designed to charge the CT-BC25 and CT-NLBC25 batteries in 25minutes. Includes battery reconditioning feature to maximize battery life. LED displayto visually indicate battery charge status. 120 VAC, 50/60Hz UL Listed. Use withPANDUIT ® battery powered crimping tools: CT-2001, CT-2002, CT-2930, CT-2980and CT-2940.Warranty: 5 years
1
C-2001 High impact strength, blow molded plastic case for CT-2001 crimping tool. Includesstorage for CT-CHR25 battery charger, two CT-NLBC25 batteries, shoulder strap andcrimp dies.
1
Cable Stripping Tools• Provides safe and easy stripping of cable
insulation for cables 3/16" to 1 9/16" diameter• Cutting blade provides circular, spiral and
PANDUIT ® offers a broad variety of mechanical lugs, splices and split bolt connectors suitable fora wide range of electrical terminations using code conductor. Designed to be reusable andinstalled without special tooling, PAN-LUG ™ Mechanical Connectors provide quality performance,ease of installation and lowest installed cost.
• Functional product information is marked directlyon the connector, facilitating the identification,ordering and usage of the mechanical connector
• Incorporate wire range-taking capability to minimizeinventory requirements
• Made from high strength, high conductivityelectrolytic copper and aluminum alloy materials toprovide optimum connectivity for power andgrounding applications
• UL Listed and CSA Certified, as noted
PAN-LUG ™ Mechanical Connectors include split bolt connectors, copper mechanical lugs,aluminum mechanical lugs and aluminum multi-tap connectors with clear PVC insulation.Products are available in stamped and formed, extruded and cast varieties of multiple barrel andtongue configurations to provide solutions for diverse power and grounding needs.PANDUIT ® offers a wide assortment of PAN-LUG ™ Power and Grounding Connectors to meet customer needs and today’s application requirements.
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
H2
Index
Two styles oftongues available:fixed andfloating
Features and Benefits — PAN-LUG ™ Mechanical Connectors
Cast Copper Connectors
Aluminum Connectors
Multi-Tap Connectors
Stamped and FormedCopper Connectors
Copper Split Bolt Connectors
Serrated barrel available for high pull-out strength
Dual rated foraluminum or copper conductors
Hex socket set screw(slotted set screw usedup through 2/0 AWGsizes) for assembly witha wrench or screwdriver
Part numberand conductorrange markedon part for easyidentification
Flat bottom allowsfull contact surface mountingMade from
high strength copper alloy
Made from highstrength copper alloy
Made from high strength,electrolytic copper alloy
Made from highstrength, extrudedaluminum alloy
Made from highstrength, extrudedaluminum alloy
MechanicalConnector
Type
StudHoleSize(In.)
Copper Code Conductor Size
#14AWG
#12AWG
#10AWG
#8AWG
#6AWG
#4AWG
#2AWG
#1AWG
1/0AWG
2/0AWG
3/0AWG
4/0AWG
250kcmil
300kcmil
350kcmil
500kcmil
600kcmil
750kcmil
800kcmil
1000kcmil
PANDUIT ® Part Number
One-Hole,StraightTongue
HL
1/4
HL1-25-X ■■ *
HL4-1-X ■■ *
HL8-1-X*
3/8HL13-1-5*
HL21-1-5
1/2HL30-1-2
HL50-1-2
One-Hole,StraightTongue
HLB1/4
HLB4-1-X ■■ *
One-Hole,StraightTongueHLA-90
1/4HLA4-1-90-X ■■ *
HLA8-1-90-X*
3/8HLA13-1-90-5
HLA21-1-90-5
Two-Hole,StraightTongueHL-2
1/4
HL1-2-25-X ■■ *
HL4-2-X ■■ *
HL8-2-X*
5/16 HL13-2-5
3/8
HL21-2-5
HL30-2-2
HL50-2-2
Two-Hole,StraightTongueHL-2N
1/2
HL8-2N-X*
HL13-2N-5
HL21-2N-5
HL30-2N-2
Two-Hole,StraightTongueH2L-2N
1/2
H2L4-2N-X ■■ *
H2L8-2N-2*
H2L13-2N-2
H2L21-2N-2
H2L30-2N-1
Two-Way,Connector
HC
—
HC4-3 ■■ *
HC8-3*
HC13-3
HC21-1
HC30-1
HC50-1
Two-Hole,StraightTongueHHL-2N
1/2
HHL8-2N-X*
HHL13-2N-5
HHL21-2N-5
HHL30-2N-1
One-Hole,StraightTongue
PNL
#10 PNL-8-C ■■ *
1/4 PNL-4-C ■■ *
5/16 PNL-1/0-L*
3/8 PNL-250-Q*
1/2PNL-500-3*
PNL-1000-3
One-Hole,StraightTongue
ML
3/16 ML8-C ■■ *
1/4 ML4-C ■■ *
5/16 ML1/0-L*
3/8 ML250-Q
Two-Hole,StraightTonguePNL-2
5/16 PNL-1/0-2-L*
3/8PNL-250-2-Q*
PNL-500-2-3*
1/2 PNL-1000-2-3
Two-Way,Connector
PNLC
—
PNLC-1/0-3*
PNLC-250-1*
PNLC-500-1*
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). H3
‡Type PNL is also CSA Certified, Type PNLC is not UL Listed or CSA Certified.■Uses slotted set screw. *Denotes minimum conductor size is solid conductor.
Selection Guide — PAN-LUG ™ Mechanical Connectors, Stamped and Formed
Pg. H21
Pg. H22
Pg. H22
Pg. H18
Pg. H19
Pg. H20
MechanicalConnector
Type
StudHoleSize(In.)
Aluminum/Copper Code Conductor Size
#14AWG
#12AWG
#10AWG
#8AWG
#6AWG
#4AWG
#2AWG
#1AWG
1/0AWG
2/0AWG
3/0AWG
4/0AWG
250kcmil
300kcmil
350kcmil
500kcmil
600kcmil
750kcmil
800kcmil
1000kcmil
PANDUIT ® Part Number
One Barrel, One-Hole
LAMA
1/4
LAMA6-14-Q ■■
LAMA2-14-Q ■■
LAMA1/0-14-Q ■■
LAMA2/0-14-Q ■■
5/16LAMA250-56-Q
LAMA300-56-Q
3/8
LAMA350-38-Q
LAMA500-38-6
LAMA600-38-6
LAMA600S-38-6 ‡ ^
5/8LAMA800-58-6 ^
LAMA1000-58-6
One Barrel,Two-Hole
LAMB
1/2LAMB350-12-6
LAMB600-12-3
LAMLB800-12-3 ▲
Two Barrel,One-HoleLAM2A
1/4LAM2A1/0-14-6 ■■
LAM2A2/0-14-6 ■■ ^
3/8 LAM2A250-38-6
1/2LAM2A350-12-6
LAM2A600-12-6
5/8LAM2A800-58-6
LAM2A1000-58-6 ^ ‡‡
Two Barrel, Two-HoleLAM2B
1/2
LAM2B350-12-3
LAM2B600-12-3
LAM2LB800-12-3 ▲▲ ‡‡
Two Barrel, Two-HoleLAM2SB
3/8
LAM2SB600-38-1
LAM2SB750-38-1
ThreeBarrel,
Two-HoleLAM3B
1/4 LAM3B2-14-6 ■■3/8 LAM3B1/0-38-6 ■■
1/2
LAM3B3/0-12-3 ■■
LAM3B250-12-1LAM3B350-12-1
LAM3B600-12-1
LAM3LB800-12-1 ▲▲
LAM3LB1000-12-1 ▲▲
ThreeBarrel,
Two-HoleLAM3SB
3/8
LAM3SB600-38-1
LAM3SB750-38-1
ThreeBarrel,
Four-HoleLAM3D
1/2
LAM3D3/0-12-3 ■■
LAM3D250-12-1
LAM3D350-12-1
LAM3D600-12-1
LAM3LD800-12-1 ▲▲
LAM3LD1000-12-1 ▲▲
Four Barrel, Two-HoleLAM4SB
3/8
LAM4SB600-38-1
LAM4SB750-38-1
Four Barrel, Four-HoleLAM4D
1/2
LAM4D250-12-1
LAM4D350-12-1
LAM4D600-12-1
LAM4LD800-12-1 ▲▲
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). H5
‡LAMA600S-38-6 can also be used with (2) 250 kcmil-1/0 AWG conductors. ■Uses slotted set screw.▲Uses double set screws. ^Not CSA Certified. ‡‡Not UL Listed.
Note: use of PANDUIT ® oxide inhibiting joint compound CMP-100 is recommended for use with aluminum mechanical connectors.
• True hex design for body and nut hex provides correct fit withsocket, box or open end wrenches resulting in proper torquing ofelectrical connection
• Pressure bar provides secure connection on a full range ofconductor combinations used with each connector assuringpremium wire pull-out strength
• UL Listed and CSA Certified for use up to 600V and temperaturerated 90°C
For Use with Copper Code Conductors
*Long body accommodates two tap conductors with single run; not CSA Certified.**The conductor sizes shown are for equal run and tap combinations for both solid and stranded unless otherwise listed.
H10 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Two Bolt Connector, Bronze, Tin Plated
For Use with Copper and Aluminum Code Conductors
• Made from high strength bronze for heavy duty connections• Tin plated to inhibit corrosion and oxidation• Cap swivels for easy installation of conductors• Rubber washer retains hardware to connector and
eliminates loose parts
• High strength silicon-bronze hardware provides premium mechanical performance when assembled to conductor
• Offered for use with aluminum conductors, but not UL Listed• UL Listed for use up to 600V and 90°C temperature rated when
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). H11
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
One-Hole, Straight Tongue, Barrel Post Lug
**Uses slotted head set screw.
T
L
W HP
For Use with Copper Code Conductors
• Made from high strength electrolytic copper to provide premiumelectrical and mechanical performance
• Compact design saves space• Wire range-taking capability minimizes inventory requirements• Inspection window to visually assure full conductor insertion
• Plated steel set screw provides high strength, durable electricalcontact between conductor and connector
• Flat bottom allows for complete contact with mounting surface• UL Listed for use up to 600V and temperature rated 90°C
One-Hole, Straight Tongue, Tin Plated, Barrel Post Lug
**Uses slotted head set screw.
T
L
W HP
For Use with Copper Code Conductors
• Made from high strength, electrolytic copper to provide premiumelectrical and mechanical performance
• Tin plated to inhibit corrosion• Compact design saves space• Wire range-taking capability minimizes inventory requirements
• Inspection window to visually assure full conductor insertion• Plated steel set screw provides high strength, durable electrical
contact between conductor and connector• Flat bottom allows for complete contact with mounting surface• UL Listed for use up to 600V and temperature rated 90°C
H12 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
One-Hole, Straight Tongue Lug
**Uses slotted head set screw.
L
W H
T
P
For Use with Copper Code Conductors
• Cast from high strength corrosion resistant copper alloy to providepremium electrical and mechanical performance
• Compact design saves space• Wire range-taking capability minimizes inventory requirements• Inspection window to visually assure full conductor insertion
• Plated steel set screw provides high strength, durable electricalcontact between conductor and connector
• Flat bottom allows for complete contact with mounting surface• UL Listed and CSA Certified for use up to 600V and UL
temperature rated 90°C
One-Hole, Straight Tongue Lug with Internal Pressure Plate
**Uses slotted head set screw.W
L
PT H
For Use with Copper Code Conductors
• Cast from high strength corrosion resistant copper alloy to providepremium electrical and mechanical performance
• Compact design saves space• Wire range-taking capability minimizes inventory requirements• Internal pressure plate provides uniform clamping force on
conductor for premium electrical performance
• Plated steel set screw provides high strength, durable electricalcontact between conductor and connector
• Flat bottom allows for complete contact with mounting surface• Inspection window to visually assure full conductor insertion• UL Listed for use up to 600V and temperature rated 90°C
• Internal pressure plate provides uniform clamping force on conductor for premium electrical performance
• Flush bottom allows for complete contact with mounting surface• Inspection window to visually assure full conductor insertion• UL Listed for use up to 600V and temperature rated 90°C
One-Hole, Straight Tongue, 90° Lug
**Uses slotted head set screw.
P T
L
W
H
For Use with Copper Code Conductors
• Provides connection of conductor at right angles to terminal bar• Cast from high strength corrosion resistant copper alloy to provide
• Internal pressure plate provides uniform clamping force onconductor for premium electrical performance
• Flush bottom allows for complete contact with mounting surface• Inspection window to visually assure full conductor insertion• UL Listed for use up to 600V and temperature rated 90°C
H14 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Two-Hole, Straight Tongue Lug
◆NEMA hole sizes and spacing.
L
W H
HOLESPACING T
P
For Use with Copper Code Conductors
• Cast from high strength corrosion resistant copper alloy to providepremium electrical and mechanical performance
• Wire range-taking capability minimizes inventory requirements• Inspection window to visually assure full conductor insertion
• Plated steel set screw provides high strength, durable electricalcontact between conductor and connector
• Flat bottom allows for complete contact with mounting surface• UL Listed for use up to 600V and temperature rated 90°C• Available with NEMA hole sizes and spacing
Two-Hole, Straight Tongue Lug with Internal Pressure Plate
**Uses slotted head set screw.
For Use with Copper Code Conductors
• Cast from high strength corrosion resistant copper alloy to providepremium electrical and mechanical performance
• Wire range-taking capability minimizes inventory requirements• Internal pressure plate provides uniform clamping force on
conductor for premium electrical performance
• Plated steel set screw provides high strength, durable electricalcontact between conductor and connector
• Inspection window to visually assure full conductor insertion• Flat bottom allows for complete contact with mounting surface• UL Listed for use up to 600V and temperature rated 90°C
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). H15
Two-Hole, Straight Tongue Lug with NEMA Hole Sizes and Spacing
◆NEMA hole sizes and spacing.W
L
PT
HOLESPACING
H
For Use with Copper Code Conductors
• Cast from high strength corrosion resistant copper alloy to providepremium electrical and mechanical performance
• Wire range-taking capability minimizes inventory requirements• Internal pressure plate provides uniform clamping force on
conductor for premium electrical performance
• Internal barrel serrations allow for premium wire pull-out strength• Inspection window to visually assure full conductor insertion• Flat bottom allows for complete contact with mounting surface• UL Listed for use up to 600V and temperature rated 90°C
Two-Hole, Straight Tongue, Tandem Set Screw Lug
◆NEMA hole sizes and spacing.
W
L
P
T
HOLESPACING
H
For Use with Copper Code Conductors
• Cast from high strength corrosion resistant copper alloy to providepremium electrical and mechanical performance
• Double set screws provide additional wire secureness for use inheavy duty applications
• Wire range-taking capability minimizes inventory requirements• Internal pressure plate provides uniform clamping force on
conductor for premium electrical performance
• Internal barrel serrations allow for premium wire pull-out strength • Inspection window to visually assure full conductor insertion• Flat bottom allows for complete contact with mounting surface• UL Listed for use up to 600V and temperature rated 90°C
Part Number
CopperConductorSize Range
Stud HoleSize(In.)
Stud HoleSpacing
(In.)
Hex KeySize(In.)
Figure Dimensions (In.)Tightening
Torque(In.-Lbs.)
Std.Pkg.Qty.L W H T P
◆ HL8-2N-X #4 SOL –#1 STR
1/2 1.75 7/16 3.94 1.00 .90 .22 3.00 100 10
◆ HL13-2N-5 #1 STR –2/0 STR
1/2 1.75 9/16 4.25 1.00 1.07 .22 3.00 250 5
◆ HL21-2N-5 2/0 STR –4/0 STR
1/2 1.75 9/16 4.19 1.25 1.34 .25 3.00 250 5
◆ HL30-2N-2 4/0 STR –300 kcmil
1/2 1.75 5/8 4.25 1.25 1.46 .31 3.00 350 2
Part Number
CopperConductorSize Range
Stud HoleSize(In.)
Stud HoleSpacing
(In.)
Hex KeySize(In.)
Figure Dimensions (In.)Tightening
Torque(In.-Lbs.)
Std.Pkg.Qty.L W H T P
◆ HHL8-2N-X #4 SOL –#1 STR
1/2 1.75 7/16 5.13 1.00 .80 .22 3.00 100 10
◆ HHL13-2N-5 #1 STR –2/0 STR
1/2 1.75 9/16 4.88 1.25 1.00 .22 3.00 250 5
◆ HHL21-2N-5 2/0 STR –4/0 STR
1/2 1.75 9/16 5.63 1.50 1.37 .25 3.00 250 5
◆ HHL30-2N-1 4/0 STR –300 kcmil
1/2 1.75 5/8 5.88 1.50 1.45 .31 3.00 350 1
Type HL-2N
Type HHL-2N
• Allows for termination of two copper conductors• Cast from high strength corrosion resistant copper alloy to provide
premium electrical and mechanical performance• Tin plated to inhibit corrosion• Wire range-taking capability minimizes inventory requirements• Internal barrel serrations provide premium wire pull-out strength
• Inspection window to visually assure full conductor insertion• Plated steel set screw provides high strength, durable
electrical contact• Flat bottom allows for complete contact with mounting surface• UL Listed for use up to 600V and temperature rated 90°C
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
H16 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Two-Hole, Straight Tongue, Two Barrel Lug
**Uses slotted head set screw.◆NEMA hole sizes and spacing.
H
HOLESPACING
PT
W
L
For Use with Copper Code Conductors
• Allows for termination of two copper conductors• Cast from high strength corrosion resistant copper alloy to provide
premium electrical and mechanical performance• Wire range-taking capability minimizes inventory requirements• Internal pressure plate provides uniform clamping force on
conductor for premium electrical performance
• Internal barrel serrations provide premium wire pull-out strength• Inspection window to visually assure full conductor insertion• Flat bottom allows for complete contact with mounting surface• UL Listed for use up to 600V and temperature rated 90°C
Two-Hole, Straight Tongue, Two Barrel, Tin Plated Lug
◆NEMA hole sizes and spacing.
HT
P
L
HOLESPACING
W
For Use with Copper Code Conductors
Part Number
CopperConductorSize Range
StudHole
Size (In.)
Stud HoleSpacing
(In.)
Hex KeySize(In.)
Figure Dimensions (In.)Tightening
Torque(In.-Lbs.)
Std.Pkg.Qty.L W H T P
◆ P2NLT-500-3 #4 SOL –500 kcmil
1/2 1.75 3/8 4.50 2.50 1.47 .38 3.00 375 3
Part Number
CopperConductorSize Range
Stud HoleSize(In.)
Stud HoleSpacing
(In.)
Hex KeySize(In.)
Figure Dimensions (In.)Tightening
Torque(In.-Lbs.)
Std.Pkg.Qty.L W H T P
◆ H2L4-2N-X #8 SOL –#4 STR
1/2 1.75 ** 3.75 1.25 .76 .19 3.00 35 10
◆ H2L8-2N-2 #4 SOL –#1 STR
1/2 1.75 7/16 3.94 1.38 .92 .22 3.00 100 2
◆ H2L13-2N-2 #1 STR –2/0 STR
1/2 1.75 9/16 4.00 1.63 1.06 .22 3.00 250 2
◆ H2L21-2N-2 2/0 STR –4/0 STR
1/2 1.75 9/16 4.19 1.88 1.34 .31 3.00 250 2
◆ H2L30-2N-1 4/0 STR –300 kcmil
1/2 1.75 5/8 4.38 2.00 1.45 .31 3.00 350 1
Type H2L-2N
Type P2NLT
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). H17
Two Set Screw Splice with Internal Pressure Plate
**Uses slotted head set screw.W
L
H
For Use with Copper Code Conductors
• Cast from high strength corrosion resistant copper alloy to providepremium electrical and mechanical performance
• Wire range-taking capability minimizes inventory requirements• Internal pressure plate provides uniform clamping force on
conductor for premium electrical performance
• Internal barrel serrations provide premium wire pull-out strength• Internal wire stops to prevent over-insertion of conductor• UL Listed for use up to 600V and temperature rated 90°C
Two Set Screw Splice
W
L
H
For Use with Copper Code Conductors
• Cast from high strength corrosion resistant copper alloy to providepremium electrical and mechanical performance
• Wire range-taking capability minimizes inventory requirements• Plated steel set screw provides high strength, durable electrical
contact between conductor and connector
• Internal wire stops to prevent over-insertion of conductor• For use up to 600V and temperature rated 90°C
H22 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
One-Hole, Offset Floating Tongue, Two Barrel Lug
For Use with Stranded Copper Code Conductors
• Dual barrel provides termination of two copper conductors• Made from high strength electrolytic copper to provide premium
electrical and mechanical performance• Wire range-taking capability minimizes inventory requirements• Internal pressure bar and V-bottom collar provide uniform
clamping force on conductor to assure positive contact between conductor and connector
• Inspection window to visually assure full conductor insertion• Plated steel set screw provides high strength, durable electrical
contact between conductor and connector• UL Listed and CSA Certified for use up to 600V
W
L
H
M
T
P
Two-Hole, Offset Floating Tongue Lug
For Use with Stranded Copper Code Conductors
• Made from high strength electrolytic copper to provide premiumelectrical and mechanical performance
• Wire range-taking capability minimizes inventory requirements• Internal pressure bar and V-bottom collar provide uniform clamping
force on conductor to assure positive contact between conductorand connector
• Inspection window to visually assure full conductor insertion• Plated steel set screw provides high strength, durable electrical
contact between conductor and connector• UL Listed and CSA Certified for use up to 600V• Available with NEMA hole sizes and spacing
**Uses slotted head set screw.◆NEMA holes sizes and spacing.
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). H23
One-Hole, Single Barrel Lug
For Use with Stranded Aluminum or Copper Code Conductors
The use of PANDUIT ® oxide inhibiting joint compound (CMP-100) is recommended for pad to pad and conductor connections. See pages H33, F118.*Listed torque values are for maximum conductor sizes, consult the installation instruction sheet for smaller sizes.**Uses slotted head set screw. ***Accomodates two conductors for conductor range 1/0 AWG – 250 kcmil.
Two-Hole, Single Barrel Lug
For Use with Stranded Aluminum or Copper Code Conductors
• Made from high strength, extruded aluminum alloy to providepremium electrical and mechanical performance
• Tin plated to inhibit corrosion• Compact design saves space• Wire range-taking capability minimizes inventory requirements• Inspection window to visually assure full conductor insertion
• Plated steel or aluminum set screw provides high strength, durableelectrical contact between conductor and connector
• LAMLB provided with dual set screws for premium clamping ofconductor to connector for heavy duty applications
• UL Listed and CSA Certified for use up to 600V and ULtemperature rated 90°C
The use of PANDUIT ® oxide inhibiting joint compound (CMP-100) is recommended for pad to pad and conductor connections. See pages H33, F118.◆NEMA hole sizes and spacing.
W
HOLESPACING
L
T P H
W
L
HOLESPACING
T P H
• Made from high strength, extruded aluminum alloy to providepremium electrical and mechanical performance
• Tin plated to inhibit corrosion• Compact design saves space• Wire range-taking capability minimizes inventory requirements
• Inspection window to visually assure full conductor insertion• Plated steel or aluminum set screw provides high strength,
durable electrical contact between conductor and connector• UL Listed and CSA Certified for use up to 600V and UL
H24 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
One-Hole, Two Barrel Lug
For Use with Stranded Aluminum or Copper Code Conductors
• Dual barrel provides termination of two conductors• Made from high strength, extruded aluminum alloy to
provide premium electrical and mechanical performance • Tin plated to inhibit corrosion• Wire range-taking capability minimizes inventory requirements
• Inspection window to visually assure full conductor insertion• Plated steel or aluminum set screw provides high strength, durable
electrical contact between conductor and connector• UL Listed and CSA Certified for use up to 600V and UL
temperature rated 90°C
The use of PANDUIT ® oxide inhibiting joint compound (CMP-100) is recommended for pad to pad and conductor connections. See pages H33, F118.*Listed torque values are for maximum conductor sizes, consult the installation instruction sheet for smaller sizes.**Uses slotted head set screw. ^Not CSA Certified. ▼Not UL Listed or CSA Certified.
W M
HT P
L
One-Hole, Vertical Two Barrel Lug
For Use with Stranded Aluminum or Copper Code Conductors
• Dual barrel provides termination of two conductors• Made from high strength, extruded aluminum alloy to provide
premium electrical and mechanical performance• Tin plated to inhibit corrosion• Wire range-taking capability minimizes inventory requirements
• Inspection window to visually assure full conductor insertion• Plated steel or aluminum set screw provides high strength, durable
electrical contact between conductor and connector• UL Listed and CSA Certified for use up to 600V and UL
temperature rated 90°C
The use of PANDUIT ® oxide inhibiting joint compound (CMP-100) is recommended for pad to pad and conductor connections. See pages H33, F118.*Listed torque values are for maximum conductor sizes, consult the installation instruction sheet for smaller sizes.
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). H25
Two-Hole, Two Barrel Lug
For Use with Stranded Aluminum or Copper Code Conductors
• Dual barrel provides termination of two conductors• Made from high strength, extruded aluminum alloy to provide
premium electrical and mechanical performance• Tin plated to inhibit corrosion• Wire range-taking capability minimizes inventory requirements• Inspection window to visually assure full conductor insertion
• Plated steel or aluminum set screw provides high strength,durable electrical contact between conductor and connector
• LAM2LB connector provided with dual set screws for premiumclamping of conductor to connector for heavy duty applications
• UL Listed for use up to 600V and temperature rated 90°C
The use of PANDUIT ® oxide inhibiting joint compound (CMP-100) is recommended for pad to pad and conductor connections. See pages H33, F118.*Not UL Listed. **Listed torque values are for maximum conductor sizes, consult the installation instruction sheet for smaller sizes.◆NEMA hole sizes and spacing.
LHOLE
SPACING
W
T P H
HOLESPACING
L
W
P HT
Two-Hole, Vertical Two Barrel Lug
For Use with Stranded Aluminum or Copper Code Conductors
• Dual barrel provides termination of two conductors• Vertical configuration saves space• Made from high strength, extruded aluminum alloy to provide
premium electrical and mechanical performance• Tin plated to inhibit corrosion• Wire range-taking capability minimizes inventory requirements
• Inspection window to visually assure full conductor insertion• Plated steel or aluminum set screw provides high strength,
durable electrical contact between conductor and connector• UL Listed and CSA Certified for use up to 600V and UL
temperature rated 90°C
The use of PANDUIT ® oxide inhibiting joint compound (CMP-100) is recommended for pad to pad and conductor connections. See pages H33, F118.*Not CSA Certified.
H26 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Two-Hole, Three Barrel LugFor Use with Stranded Aluminum or Copper Code Conductors
• Triple barrel provides termination of three conductors• Made from high strength, extruded aluminum alloy to provide
premium electrical and mechanical performance• Tin plated to inhibit corrosion• Wire range-taking capability minimizes inventory requirements• Inspection window to visually assure full conductor insertion
• Plated steel or aluminum set screw provides high strength,durable electrical contact between conductor and connector
• LAM3LB connector is provided with dual set screws toallow premium clamping of conductor to connector forheavy duty applications
• For use up to 600V and temperature rated 90°C• Available with NEMA hole sizes and spacing
The use of PANDUIT ® oxide inhibiting joint compound (CMP-100) is recommended for pad to pad and conductor connections. See pages H33, F118.*Listed torque values are for maximum conductor sizes, consult the installation instruction sheet for smaller sizes.**Uses slotted head set screw. ◆NEMA hole sizes and spacing.
LHOLE
SPACING
W
HT P T P
W
HOLESPACING
L
H
Two-Hole, Vertical Three Barrel LugFor Use with Stranded Aluminum or Copper Code Conductors
• Triple barrel provides termination of three conductors• Vertical configuration saves space• Made from high strength, extruded aluminum alloy to provide
premium electrical and mechanical performance• Tin plated to inhibit corrosion
• Wire range-taking capability minimizes inventory requirements• Inspection window to visually assure full conductor insertion• Plated steel or aluminum set screw provides high strength, durable
electrical contact between conductor and connector• For use up to 600V and temperature rated 90°C
The use of PANDUIT ® oxide inhibiting joint compound (CMP-100) is recommended for pad to pad and conductor connections. See pages H33, F118.
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). H27
Four-Hole, Three Barrel LugFor Use with Stranded Aluminum or Copper Code Conductors
• Three barrels provide termination of three conductors• Made from high strength, extruded aluminum alloy to provide
premium electrical and mechanical performance• Tin plated to inhibit corrosion• Wire range-taking capability minimizes inventory requirements
• Inspection window to visually assure full conductor insertion• Plated steel or aluminum set screw provides high strength, durable
electrical contact between conductor and connector• LAM3LD connector is provided with dual set screws to
allow premium clamping of conductor to connector for heavyduty applications
• For use up to 600V and temperature rated 90°C
The use of PANDUIT ® oxide inhibiting joint compound (CMP-100) is recommended for pad to pad and conductor connections. See pages H33, F118.*Listed torque values are for maximum conductor sizes, consult the installation instruction sheet for smaller sizes.**Uses slotted head set screw. ◆NEMA hole sizes and spacing.
T H
HOLESPACING
L
W
P
HOLESPACING
T P H
HOLESPACING
L
WHOLESPACING
Two-Hole, Vertical Four Barrel Lug
For Use with Stranded Aluminum or Copper Code Conductors
• Triple barrel provides termination of three conductors• Vertical configuration saves space• Made from high strength, extruded aluminum alloy to provide
premium electrical and mechanical performance• Tin plated to inhibit corrosion
• Wire range-taking capability minimizes inventory requirements• Inspection window to visually assure full conductor insertion• Plated steel or aluminum set screw provides high strength,
durable electrical contact between conductor and connector• For use up to 600V and temperature rated 90°C
The use of PANDUIT ® oxide inhibiting joint compound (CMP-100) is recommended for pad to pad and conductor connections. See pages H33, F118.
H28 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Four-Hole, Four Barrel LugFor Use with Stranded Aluminum or Copper Code Conductors
• Four barrels provide termination of four conductors• Made from high strength, extruded aluminum alloy to provide
premium electrical and mechanical performance• Tin plated to inhibit corrosion• Wire range-taking capability minimizes inventory requirements• Inspection window to visually assure full conductor insertion
• Plated steel or aluminum set screw provides high strength, durableelectrical contact between conductor and connector
• LAM4LD connector is provided with dual set screws to allowpremium clamping of conductor to connector for heavy duty applications
• For use up to 600V and temperature rated 90°C
The use of PANDUIT ® oxide inhibiting joint compound (CMP-100) is recommended for pad to pad and conductor connections. See pages H33, F118.*Listed torque values are for maximum conductor sizes, consult the installation instruction sheet for smaller sizes.◆NEMA hole sizes and spacing.
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). H29
Transformer Lug KitFor Use with Stranded Aluminum or Copper Code Conductors
• Kits include all of the connectors andhardware to make a complete transformerconnection in a single convenient package
• Lugs are made from high strength, extrudedaluminum alloy and are tin plated to inhibitcorrosion and oxidation
• Plated steel cap screws, belleville and flatwashers and hex nuts are provided to assurethat terminal to bus connections are madeusing proper hardware resulting in true torqueto pressure performance
• Hardware is packaged in a sealed plastic bagto prevent lost hardware prior to installation
• KLM6-800 and KLM350-800 kits include lugsthat accommodate 750 kcmil conductors usedwith large transformers
• Lugs are UL Listed and CSA Certified for useup to 600V and UL temperature rated 90°C
The use of PANDUIT ® oxide inhibiting joint compound (CMP-100) is recommended for pad to pad and conductor connections. See pages H33, F118.
Splicer/Reducer
For Use with Stranded Aluminum or Copper Code Conductors
• Made from high strength extruded aluminum alloy to providepremium electrical and mechanical performance
• Tin plated to inhibit corrosion• Rounded bottoms to facilitate taping
• Solid center barrier prevents contact of dissimilar metal conductors• Wire range-taking capability minimizes inventory requirements• UL Listed and CSA Certified for use up to 600V and UL
temperature rated 90°C
W
H
L
H
W
L L
H
W
The use of PANDUIT ® oxide inhibiting joint compound (CMP-100) is recommended. See pages H33, F118.*Listed torque values are for maximum conductor sizes, consult the installation instruction sheet for smaller sizes.**Uses slotted screws.
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). H31
Multi-Tap Connector with Clear Insulation, Double-Sided Entry
For Use with Stranded Aluminum or Copper Code Conductors
• Flexible design – can be used as a tap, splice or dead end connector
• Body made from high strength, extruded aluminum alloy to providepremium electrical and mechanical performance
• Insulated with clear PVC to eliminate need for taping and allow forvisual inspection of the complete conductor insertion
• Each port pre-filled with oxide inhibiting joint compound seals outair and moisture to deter surface oxidation
• Wire range-taking capability minimizes inventory requirements• Dual sided entry allows offset and opposite entry for primary and
secondary conductors• Plated steel or aluminum set screw provides high strength,
durable electrical contact between conductor and connector• UL Listed for use up to 600V and temperature rated 90°C
W
L
S
H
*Listed torque values are for maximum conductor sizes, consult the installation instruction sheet for smaller sizes.**Uses slotted head set screw. ***PCSB600-5-2 is also CSA Certified.
H32 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
In-Line Splicer/Reducer with Clear Insulation
For Use with Stranded Aluminum or Copper Code Conductors
• Flexible design – can be used as a splice or reducer• Dual rated for use with copper or aluminum conductors• Made from high strength, extruded aluminum alloy to provide
premium electrical and mechanical performance• Insulated with clear PVC to eliminate need for taping and allow for
visual inspection of the complete conductor insertion
• Each port pre-filled with oxide inhibiting joint compound seals outair and moisture to deter surface oxidation
• Wire range-taking capability minimizes inventory requirements• Plated steel or aluminum set screw provides high strength,
durable electrical contact between conductor and connector• UL Listed and CSA Certified for use up to 600V and UL
temperature rated 90°C
W
L
H
Part Number Conductor Size Range
Figure Dimensions (In.)Std.Pkg.Qty.L W H
PISR2-1 #2 STR – #14 SOL 2.38 .62 1.15 1
PISR1/0-1 1/0 STR – 14 SOL 2.91 .78 1.31 1
Type PISR
SystemOverview
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). H33
Belleville Compression Washers
• Conical spring washer for use when assembling aluminumconnectors to copper and/or steel pads, compensates for differing rates of thermal expansion to keep hardware assemblyfrom loosening
• Made from hardened steel to provide high strength• Cadmium plated to inhibit corrosion
D
T
H
Joint Compounds
• Oxide inhibitor for compression cable connections made withaluminum compression connectors lowers electrical contactresistance of compression joint while sealing out air and moisture to prevent the formation of surface oxides
• Wide operating temperature range; can be used in a wide range of electrical and environmental conditions
• Non-toxic• Non-flammable• Packaged in convenient 8 oz. dispenser bottles
Part Number Part Description
Std.Pkg.Qty.
CMP-100-1 Contact aid for pad-to-pad or thread-to-thread aluminum connections. Operatingtemperature range -60°F(-51°C) to 400°F (204°C). Maintains low electrical resistanceand seals out air and moisture to prevent the formation of surface oxides.
1
CMP-200-1 Contact aid for cable connections with compression connections made on aluminumconductor. Operating temperature range -40°F (-40°C) to 400°F (204°C). Lowers contactresistance of compression joint and seals out moisture and air to prevent the formationof surface oxides. Compatible with all insulating materials.
1
Part NumberStud Hole Size
(In.)
Figure Dimensions (In.)Std.Pkg.Qty.D H T
CW-14-L 1/4 .68 .09 .05 50
CW-56-L 5/16 .81 .08 .06 50
CW-38-L 3/8 .93 .10 .07 50
CW-12-Q 1/2 1.18 .12 .09 25
CW-58-Q 5/8 1.49 .15 .12 25
Type CW
Type CMP
Terminals
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
H34
Index
Guidelines for Installing Connectors on Aluminum Conductor Cable:
1 SELECT the correct connector for your application
• Always use an aluminum conductor with analuminum connector
• Verify that the connector is marked for the conductor size and type that you are using
2 REMOVE the insulation from insulated cable. See page G32 for PANDUIT ® cable stripping tools.
• Use care to avoid nicking the conductor strands• Strip the insulation to the proper length as listed in the
installation instruction sheets provided with PANDUIT ® connectors.
3 CLEAN the exposed conductor using a wire brush or an emerycloth. In a similar manner, clean an unplated connector pad andthe surface to which the connector will be attached. Solventshould be used to clean plated parts that are dirty, but the plating should never be disturbed with abrasives.
4 APPLY PANDUIT ® Joint Compound to the clean conductor formechanical connector applications (see pages H33, F118). Jointcompound will deter the formation of surface oxides after installation. (Aluminum compression connectors and insulatedmechanical connectors are pre-filled with joint compound.)
5 INSERT the conductor into the connector and:
a) for mechanical connectors, tighten the screws to the recommended torque values...
ORb) for compression connectors, use the recommended die and
crimping tool to make the proper compression connection
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). J1
PANDUIT ® PAN-LUG ™ Grounding Connectors provide innovative solutions for joining ground conductor to water pipe, ground rods, conduit, iron pipe and structural steel. PAN-LUG ™
mechanical grounding connectors are designed with the needs of the end user in mindfocusing on easy installation, lowest installed cost and long-term reliability.
• Functional product information is marked directlyon the connector, facilitating the identification,ordering and usage of the grounding connector
• Designed for easy installation — no specialtooling required
• Made from high strength, high conductivityelectrolytic copper and aluminum alloy materialsto provide optimum connectivity for power andgrounding applications
• Include plated or silicon bronze hardware toinhibit corrosion
• Copper and bronze grounding connectors are ULListed for direct burial in earth and concrete,as noted
• UL Listed per UL 467 for grounding and bonding,as noted
PANDUIT ® PAN-LUG ™ Grounding Connectors are available in a variety of configurations, includingwater pipe clamps, bronze grounding clamps and bronze service post connectors.PANDUIT ® offers a wide assortment of PAN-LUG ™ Power and Grounding Connectors to meet customer needs and today’s application requirements.
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
J2
Index
Provided with highstrength, corrosionresistant siliconbronze nut andpressure pad
Features and Benefits — PAN-LUG ™ Grounding Connectors
Bronze Grounding Clamp
Bronze Water Pipe Clamp
Ground Rod Clamp
Bronze Service Post Connector
Bronze Grounding Clamp
Provides twooptions:attachment ofgroundingconductor toclamp eitherparallel orperpendicular toaxis of pipe orground rod
Part number, conductor range,rod and pipe size range and “DB”suitable for direct burial markedon part for easy identification
Part number,conductorrange, waterpipe sizerange and“DB” suitablefor direct burialmarked onpart for easyidentification
Provided with highstrength steelhardware plated toinhibit corrosion
Made fromhigh strength,electrolyticcast bronze
Part number,conductor range and“DB” suitable for directburial marked on partfor easy identification
Provided with highstrength, corrosionresistant siliconbronze hardware
Spacer separatesconductor frommounting surface
Available in configurations for use withone or two copper conductors witheither a standard or long stud length
Each part accommodates awide range of copperconductor sizes and water pipesizes — minimizes inventory
Part number,conductorrange and “DB” suitablefor direct burialmarked on partfor easyidentification
Made from a singlepiece of hard drawncopper electrolyticrod — provideshigh strength
Provided with highstrength, corrosionresistant siliconbronze hardware
Part number, conductorrange, ground rod sizeand “DB” suitable fordirect burial marked onpart for easy identification
Designed to maintain properalignment between ground rodand conductor during installation
Made fromhigh strength,electrolyticcast bronze
Made fromhigh strength,electrolyticcast bronze
ULRC US
ULListedDirectBurial
ServicePostType
StudSize(In.)
ThreadLength
(In.)
Copper Code Conductor Size
#12AWG
#10AWG
#8AWG
#7AWG
#6AWG
#4AWG
#3AWG
#2AWG
#1AWG
1/0AWG
2/0AWG
3/0AWG
4/0AWG
250kcmil
300kcmil
350kcmil
400kcmil
500kcmil
PANDUIT ® Part Number
BronzeService
PostOne
ConductorSP1
1/4-20
1/2 SP1-8-C*1 SP1-8L-C*
1/2 SP1-7-C*1 SP1-7L-C*
5/16-189/16 SP1-4-C*
1 SP1-4L-C*
3/8-16
5/8 SP1-3-C*1 1/8 SP1-3L-C*5/8 SP1-2-C
1 1/8 SP1-2L-C
1/2-13
3/4 SP1-1/0-L*1 1/4 SP1-1/0L-L*3/4 SP1-2/0-Q*
1 1/4 SP1-2/0L-Q*
5/8-11
1 SP1-4/0-Q*1 1/2 SP1-4/0L-Q*
1 SP1-350-121 1/2 SP1-350L-12
3/4-101 3/8 SP1-500-121 3/4 SP1-500L-12
BronzeService
PostTwo
ConductorsSP2
1/4-20
1/2 SP2-8-C*1 SP2-8L-C*
1/2 SP2-7-C*1 SP2-7L-C*
5/16-189/16 SP2-4-C*
1 SP2-4L-C*
3/8-16
5/8 SP2-3-C*1 1/8 SP2-3L-C*5/8 SP2-2-C*
1 1/8 SP2-2L-C*
1/2-13
3/4 SP2-1/0-L*1 1/4 SP2-1/0L-L*3/4 SP2-2/0-Q*
1 1/4 SP2-2/0L-Q*
5/8-11
1 SP2-4/0-Q*1 1/2 SP2-4/0L-Q*
1 SP2-350-121 1/2 SP2-350L-12
3/4-101 3/8 SP2-500-121 3/4 SP2-500L-12
BronzeService
PostOne
ConductorSPF1
1/4-20 1/4 SPF1-8-C*SPF1-7-C*
5/16-18 5/16 SPF1-4-C*
3/8-16 3/8 SPF1-3-CSPF1-2-C
1/2-137/16 SPF1-1/0L*1/2 SPF1-2/0-Q*
5/8-11 5/8 SPF1-4/0-QSPF1-350-12
3/4-10 3/4 SPF1-500-12
BronzeService
PostTwo
ConductorsSPF2
1/4-20 1/4 SPF2-8-C*SPF2-7-C*
5/16-18 5/16 SPF2-4-C*
3/8-16 3/8 SPF2-3-C*SPF2-2-C*
1/2-137/16 SPF2-1/0-L*1/2 SPF2-2/0-Q*
5/8-11 5/8 SPF2-4/0-Q*SPF2-350-12
3/4-10 3/4 SPF2-500-12
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). J3
Selection Guide — PAN-LUG ™ Grounding Connectors
*Denotes minimum conductor size is solid conductor.
ULRC US
ULRC US
ULRC US
ULRC US
Selection Guide continues on page J4
Pg. J6
Pg. J5
Pg. J7
Pg. J8
ULListedDirectBurial
GroundClampType
GroundRodSize(In.)
PipeSize(In.)
Copper Code Conductor Size
#14AWG
#12AWG
#10AWG
#8AWG
#7AWG
#6AWG
#4AWG
#3AWG
#2AWG
#1AWG
1/0AWG
2/0AWG
3/0AWG
4/0AWG
250kcmil
300kcmil
350kcmil
400kcmil
500kcmil
PANDUIT ® Part Number
BronzeGroundClampOne
ConductorGPL
5/8 or3/4
3/8GPL-4-Q*
GPL-5-Q*GPL-6-Q*
7/8 or 1 1/2 or 3/4GPL-8-Q*
GPL-9-Q*GPL-10-Q*
— 1GPL-14-X*
GPL-15-X*GPL-16-X*
— 1 1/4GPL-20-X*
GPL-21-X*GPL-22-X*
— 1 1/2GPL-26-X*
GPL-27-X*GPL-28-X*
— 2GPL-32-3*
GPL-33-3*GPL-34-3*
— 2 1/2GPL-39-3*
GPL-40-3*
— 3GPL-44-1*
GPL-45-1*GPL-46-1*
— 3 1/2GPL-51-1*
GPL-52-1*
— 4GPL-57-1*
GPL-58-1*
BronzeGround
Clamp TwoConductors
GU
—
1 GU-2-X* ‡
1 1/4 GU-4-X* ‡
2 GU-13-3 ‡
BronzeGroundClamp
KP
—1/2-#1 KP1-C* @
1 1/4-#2 KP2-L* @
BronzeGroundClampKLS
— 1/2-1
KLS-0-Q* ‡ 1/2" hub size
KLS-1-Q* ‡ 3/4" hub size
KLS-1A-X* ‡ 1" hub size
BronzeGroundClamp
KH
—1/2-1 KH-1-L* ‡ 1/2" hub size
1 1/4-2 KH-2-L* ‡ 1/2" hub size
AluminumGroundClamp
GC
—
1/2-3/4-1 GC-15A-Q @ DR
1 1/4-1 1/2-2 GC-18A-X @ DR
2 1/2-3-3 1/2-4
GC-22A-4 @ DR
BronzeGround
RodClamp
WB
1/2
—
WB12-L*
5/8 WB34-X
3/4 WB34-X
5/8 WB58-Q
BronzeGroundClampGMS
— —
GMS-1-X*
GMS-2-Q*
GMS-3-Q*
BronzeGroundClamp
GM
— —GM-2-Q*
GM-3-Q*
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
J4
Index
*Denotes minimum conductor size is solid conductor. @Denotes not UL Listed for Direct Burial.DR Denotes Dual Rated for use with copper or aluminum conductors. ‡ Denotes not UL Listed or CSA Certified.
• True hex design for body and nut hex provides correct fit withsocket, box or open end wrenches resulting in proper torquingof electrical connection
• Pressure bar provides secure connection on a full range ofconductor combinations used with each connector providingpremium wire pull-out strength
• UL Listed for grounding and bonding and suitable for directburial in earth or concrete
Part NumberConductorSize Range
StudSize*
FigureDimensions (In.)
NutHex(In.)
BodyHex(In.)
TighteningTorque
(In.-Lbs.)
Std.Pkg.Qty.L Z
SP2-8-C #12 SOL –#8 STR
1/4 – 20 .75 .50 .50 .38 80 100
SP2-8L-C .75 1.00
SP2-7-C #10 SOL –#7 STR
1/4 – 20 1.00 .50 .69 .50 165 100
SP2-7L-C 1.00 1.00
SP2-4-C #10 SOL –#4 STR
5/16 – 18 1.16 .56 .75 .56 240 100
SP2-4L-C 1.16 1.00
SP2-3-C #10 SOL –#3 STR
3/8 – 16 1.09 .63 .81 .63 275 100
SP2-3L-C 1.09 1.13
SP2-2-C #10 SOL –#2 STR
3/8 – 16 1.38 .63 .88 .69 385 100
SP2-2L-C 1.28 1.13
SP2-1/0-L #2 SOL –1/0 STR
1/2 – 13 1.69 .75 1.00 .75 385 50
SP2-1/0L-L 1.69 1.25
SP2-2/0-Q #2 SOL –2/0 STR
1/2 – 13 1.88 .75 1.13 .88 500 25
SP2-2/0L-Q 1.88 1.25
SP2-4/0-Q #1 SOL –4/0 STR
5/8 – 11 2.25 1.00 1.38 1.13 650 25
SP2-4/0L-Q 2.25 1.50
SP2-350-12 #1 STR –350 kcmil
5/8 – 11 2.69 1.00 1.50 1.25 650 12
SP2-350L-12 2.69 1.50
SP2-500-12 3/0 STR –500 kcmil
3/4 – 10 3.19 1.38 1.81 1.50 825 12
SP2-500L-12 3.19 1.75
Type SP2
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). J7
ULRC US Service Post Connector, Female Thread, Single Conductor, Bronze
• For grounding one copper code conductor to steel structures,bus bars or transformers or for tapping from bus bar usingexternal studs, screws or bolts
• Made from high copper content, hard drawn copper rod provideshigh strength
• Wire range-taking capability minimizes inventory requirements• True hex design for body and nut hex provides correct fit with
socket, box or open end wrenches resulting in proper torquingof electrical connection
• Pressure bar provides secure connection on a full range ofconductor combinations used with each connector providingpremium wire pull-out strength
• UL Listed for grounding and bonding and suitable for directburial in earth or concrete
*UNC threads.
L
Z
Part NumberConductorSize Range
ThreadSize*
FigureDimensions (In.)
NutHex(In.)
BodyHex(In.)
TighteningTorque
(In.-Lbs.)
Std.Pkg.Qty.L Z
SPF1-8-C #12 SOL – #8STR
1/4 – 20 .91 .25 .50 .38 80 100
SPF1-7-C #10 SOL – #7STR
1/4 – 20 1.13 .25 .69 .50 165 100
SPF1-4-C #8 SOL – #4STR
5/16 – 18 1.44 .31 .75 .56 240 100
SPF1-3-C #6 STR – #3STR
3/8 – 16 1.50 .38 .81 .63 275 100
SPF1-2-C #6 STR – #2STR
3/8 – 16 1.63 .38 .88 .69 385 100
SPF1-1/0-L #2 SOL – 1/0STR
1/2 – 13 1.88 44 1.00 .75 385 50
SPF1-2/0-Q #1 SOL – 2/0STR
1/2 – 13 2.06 .50 1.13 .88 500 25
SPF1-4/0-Q 1/0 STR – 4/0STR
5/8 – 11 2.38 .63 1.38 1.13 650 25
SPF1-350-12 4/0 STR – 350kcmil
5/8 – 11 2.63 .63 1.50 1.25 650 12
SPF1-500-12 300 kcmil –500 kcmil
3/4 – 10 3.13 .75 1.81 1.50 825 12
T E R M I N A T I O N S O L U T I O N S
Type SPF1
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
J8 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
ULRC US Service Post Connector, Female Thread, Two Conductor, Bronze
• For grounding two copper code conductors to steel structures,bus bars or transformers or for tapping from bus bar using externalthreaded studs, screws or bolts
• Made from high copper content, hard drawn copper rod provideshigh strength
• Wire range-taking capability minimizes inventory requirements• True hex design for body and nut hex provides correct fit with
socket, box or open end wrenches resulting in proper torquingof electrical connection
• Pressure bar provides secure connection on a full range ofconductor combinations used with each connector providingpremium wire pull-out strength
• UL Listed for grounding and bonding and suitable for directburial in earth or concrete
*UNC threads.
L
Z
Part NumberConductorSize Range
ThreadSize*
FigureDimensions (In.)
NutHex(In.)
BodyHex(In.)
TighteningTorque
(In.-Lbs.)
Std.Pkg.Qty.L Z
SPF2-8-C #12 SOL – #8STR
1/4 – 20 1.13 .25 .50 .38 80 100
SPF2-7-C #10 SOL – #7STR
1/4 – 20 1.44 .25 .69 .50 165 100
SPF2-4-C #10 SOL – #4STR
5/16 – 18 1.56 .31 .75 .56 240 100
SPF2-3-C #10 SOL – #3STR
3/8 – 16 1.63 .38 .81 .63 275 100
SPF2-2-C #10 SOL – #2STR
3/8 – 16 1.94 .38 .88 .69 385 100
SPF2-1/0-L #2 SOL – 1/0STR
1/2 – 13 2.13 .44 1.00 .75 385 50
SPF2-2/0-Q #2 SOL – 2/0STR
1/2 – 13 2.31 .50 1.13 .88 500 25
SPF2-4/0-Q #1 SOL – 4/0STR
5/8 – 11 2.50 .63 1.38 1.13 650 25
SPF2-350-12 #1 STR – 350kcmil
5/8 – 11 2.69 .63 1.50 1.25 650 12
SPF2-500-12 3/0 STR – 500kcmil
3/4 – 10 3.31 .75 1.81 1.50 825 12
Type SPF2
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). J9
ULRC US Grounding Clamp, U-Bolt, Bronze
H
LW
• Used to ground copper conductor parallel or at a right angleto a rod, tube or pipe
• Made from high strength, electrolytic cast bronze • High strength silicon bronze hardware provides long-term
reliable assembly
• Accommodates a wide range of pipe, tube, rod and conductorsizes — minimizes inventory
• UL Listed for grounding and bonding and suitable for directburial in earth or concrete
Part Number
GroundRod Size
(In.)
IronPipe Size
(In.)ConductorSize Range
Figure Dimensions (In.)BoltDia.(In.)
HexSize(In.)
TighteningTorque
(In.-Lbs.)
Std.Pkg.Qty.L W H
GPL-4-Q 5/8 or 3/4 3/8 #8 SOL – #4 STR 2.00 1.38 2.75 3/8 9/16 110 25
GPL-5-Q 5/8 or 3/4 3/8 #4 SOL – 2/0 STR 2.00 1.63 2.75 3/8 9/16 180 25
GPL-6-Q 5/8 or 3/4 3/8 2/0 SOL – 250 kcmil 2.00 1.88 2.75 3/8 9/16 240 25
GPL-8-Q 7/8 or 1 1/2 or 3/4 #8 SOL – #4 STR 2.38 1.38 2.63 3/8 9/16 110 25
GPL-9-Q 7/8 or 1 1/2 or 3/4 #4 SOL – 2/0 STR 2.38 1.63 2.63 3/8 9/16 180 25
GPL-10-Q 7/8 or 1 1/2 or 3/4 2/0 SOL – 250 kcmil 2.38 1.88 3.00 3/8 9/16 240 25
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). K1
SSUUPPPPOORRTT PPRROODDUUCCTTSSPANDUIT ® is a leading global producer of electrical products, including REEL SMART ™ System,heat shrink, printers, software, labels and cable ties. These products complement the completetermination solution and make PANDUIT ® the best source for all your electrical needs.
• PANDUIT ® REEL SMART ™ System provides the best solution for quality,high volume terminations designed to dramatically reduce set-up time and downtime. The REEL SMART ™ continuously molded offering provides product for virtually any insulationapplication, including the industry’s only continuouslymolded right angle disconnects,butt splices,and the largest reel-fed expanded barrel disconnect offering.(For more information go to www.panduit.com/reelsmart.)
• PANDUIT ® heat shrink products provide an economical and easy way to insulate,protect,harness and color code electrical / electronic components and cable in a wide variety of sizes and materials.(For more information go to www.panduit.com/heatshrink or request catalog SA-CTCB03.)
• PANDUIT ® labeling products,software and printers assist with proper identification of wires and cable.(For more information go to www.panduit.com/idproductsor request catalog SA-IDCB16.)
• PANDUIT ® cable ties are available in a broad selection of sizes,styles,materials and colors. Industry leadinginstallation tools are offered to speed installation and lower installed cost. (For more information go towww.panduit.com/cableties or request catalog SA-CTCB03.)
PANDUIT ® continually provides new designs with innovative features to meet the applicationchallenges encountered by customers, while providing the lowest installed cost.
The PANDUIT ® continuously molded REEL SMART ™ products are designed such that the terminal, disconnect, and butt splice housings are connected byan integral molded carrier in the barrel crimp zone, producing a continuous length of product. Plated metal terminals, disconnects and splices arethen assembled into the housings. During termination, the continuously molded components are fed into a universal applicator.This processproduces a reel-fed solution that eliminates a variety of problems associated with other reel-fed designs and provides high quality, high capacityproduct on reels for longer, uninterrupted production runs — resulting in the lowest installed cost.
The PANDUIT ® CA9 EZAIR ™ applicator automatically adjusts feed stroke to the correct pitch and length for the entire product line of continuouslymolded products. The need for multiple applicators is eliminated. The applicator, in conjunction with the precision, continuously molded productprovides perfect front-to-back and side-to-side alignment in the die pocket for a high quality termination every time — resulting in the mostoptimum system to terminate terminals.
Pre-insulated designeliminates the need forpost-insulation —resulting inlabor savings
Continuously moldeddesign always alignsproduct with thecarrier strip —resulting in troublefree tool operation
Plastic carrier stripeliminates sharp,unplated edges as foundon metal strip-fed carriers— providing bettercorrosion resistance
Automatic, self-adjustingfeed stroke — resulting incorrect pitch and length
Versatile applicatordesign — allows foruse in benchpresses, and mostautomatic wireprocessing systems
Universal applicatorinstalls entire REEL SMART ™
product line —resulting inlower toolinginventory costs
Quick change dies —provide fast productchange-over andreduction in set-up time
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). K3
The 3-piece design terminal provides a permanently attached tin plated brass sleeve for insulation grip in funnel and straight entry sleevedesigns. This product feature offers the highest quality reliable terminations. Nylon insulation is rated up to 600V maximum and designedfor up to 105°C (221°F) operating temperature maximum. Supplied on rings, forks, locking forks, short locking forks and flanged forks inwire sizes #22 through #10.
• Sleeved Barrel – assures crimp reliability
• PNF – funnel-entry styles available
• Metal Insulation Crimp – provides DOUBLE CRIMP wire insulationgrip sleeve for high vibration or conductor strain environments
• Product Markings – UL and CSA Rated – up to 600V, maximumoperating temperature 105° C (221° F)
The PVC insulation forms an insulation crimp on the wire insulation. Supplied on #22 – #10 rings, forks, locking forks, short locking forksand flanged forks. All polyvinylchloride 2-piece insulated terminals are rated up to 600V maximum and designed for up to 105°C (221°F)operating temperature maximum.
Performance Requirements
Part Number System for REEL SMART ™ Terminals
Applicable PAN-TERM ® products meet or exceed the following test specifications:• UL486A (Terminals)• UL486C (Splices)• UL310 (Blade Adapters)• CSA C22.2 No. 65 (all designs)
UL and CSA approved products are shown with theapplicable logos in the product section.
UL file #E52164, CSA File #LR31212
P NF 14 6 R N 3K
Type
P = Terminal
BS = Butt Splice
Insulation
N = Nylon Insulated
NF = Nylon Insulated Funnel Entry
V = VinylInsulated
SpecialConfiguration
N = Narrow Tongue
W = WideTongue
B = Butted Seam
= Standard(leave blank)
Wire Range
18 = #22 - 18
14 = #16 - 14
12 = #16 - 12
10 = #12 - 10
Std. Pkg. Size
2K = 2,000 pcs.
3K = 3,000 pcs.
Stud Size
4 = #4
5 = #5
6 = #6
8 = #8
10 = #10
14 = 1/4"
56 = 5/16"
38 = 3/8"
Tongue Configuration
—
Wire Size (AWG)
#26 #24 #22 #20 #18 #16 #14 #12 #10
UL 486A (TERMINALS), UL310 (MALE BLADE ADAPTERS)Test Current for Max. 50°Rise (Amps)
Male Blade Adapters, Vinyl Insulated — Funnel Entry
Part Number Wire Range Color Code Max. Ins.
Figure Dimensions (In.) Tab Size CA9 SeriesCrimp Die
CA-800 SeriesCrimp Die
Pieces PerReelL Y In.
DV18-145MB-3K 22-18 AWG Red .155 .90 .42 .145 x .032 CD9-1A CD-800-1 3000
DV14-145MB-3K 16-14 AWG Blue .175 .90 .42 .145 x .032 CD9-2A CD-800-2 3000
Butt Splices Nylon Insulated and Premium Grade Nylon
• One side machine applied termination replaces manual crimping• Available with insulation crimp premium grade nylon• Barrel locating ribs provide for accurate hand tool placement• Brazed seam with center wire stop for increased performance
and productivity
• Funnel entry on machine termination side to increase productivity• Also hand crimped with PANDUIT ® CT-100 or CT-1550/CT1551
crimping tools
Part Number Wire Range Color Code Max. Ins.
Figure Dimensions (In.) CA9 SeriesCrimp Die
CA-800 SeriesCrimp Die
Pieces PerReelL I.D.
BSN18-3K 22-16 AWG Red .150 .95 .05 CD9-1A CD-800-1 3000
BSN14-3K 18-14 AWG Blue .170 .95 .07 CD9-2A CD-800-2 3000
*UL and CSA Rated up to 600V per UL310 *UL and CSA Rated up to 600V
*UL and CSA rated up to 300V
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). K15
Applicable REEL SMART ™ products meet or exceed the following test specifications:• Listed per Underwriters Laboratories, Inc. Standard
UL 310 (Disconnects)• Recognized under the Component Recognition Program of Underwriters Laboratories Inc.• Certified by Canadian Standards Association (Disconnects)• UL and CSA listed products are shown with the applicable logos in the product section.• UL file #E78522. CSA file #LR31212.
Performance RequirementsWire Size (AWG)
#22 #20 #18 #16 #14 #12 #10
UL310 (DISCONNECTS)Continuous Test Current for Max.30°C Rise (Amps) (for .187",.205", .250" tab widths)
3 4 7 10 15 20 24
Continuous Test Current for Max.30°C Rise (Amps) (for .110" tab width)
2 3 4 5Not Applicable
Min. Tensile Strength* (Lbs.) 8 13 20 30 50 70 80*Pull-out force of the crimped disconnect
.187/.205: Expandable receptacle will accept male tabsfrom .187" to .205" widths in.032" or .020" thick styles.Fully reliable connection throughall widths.
Features and Benefits — REEL SMART ™ Disconnects
SupportProducts
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
K16 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
*DV10-250-2K is not UL Listed or CSA Certified.**DV10-250C-2K is UL Recognized and CSA Certified.‡Compression tab disconnect to fit .250" tabs with a post style support.
Part Number Wire Range Color Code Max. Ins.
Figure Dimensions(In.) Tab Size CA9 Series
Crimp DieCA-800 Series
Crimp DiePieces
Per ReelL W In. mm
DV18-187B-3K
22-18 AWG Red
.160 .77 .23 .187 x .032 4.8 x .8
CD9-1A CD-800-1
3000
DV18-188B-3K .160 .77 .23 .187 x .020 4.8 x .5 3000
DV18-205B-3K .160 .77 .25 .187/.205 x .032 4.8/5.2 x .8 3000
DV18-206B-3K .160 .77 .25 .187/.205 x .020 4.8/5.2 x .5 3000
DV18-250B-3K .160 .83 .29 .250 x .032 6.3 x .8 3000
DV14-187B-3K
16-14 AWG Blue
.170 .77 .23 .187 x .032 4.8 x .8
CD9-2A CD-800-2
3000
DV14-188B-3K .170 .77 .23 .187 x .020 4.8 x .5 3000
DV14-205B-3K .178 .77 .25 .187/.205 x .032 4.8/5.2 x .8 3000
DV14-206B-3K .178 .77 .25 .187/.205 x .020 4.5/5.2 x .5 3000
DV14-250B-3K .178 .83 .29 .250 x .032 6.3 x .8 3000
DV10-250-2K*12-10 AWG Yellow
.230 .95 .29 .250 x .032 6.3 x .8CD9-3B CD-800-3
2000
DV10-250C-2K‡** .220 .95 .29 .250 x .032 6.4 x .8 2000
L
W
Type DNFR-FIB
Type DV-B
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). K19
DISCOGRIP ™ Female Disconnects, Fully Insulated
• Premium grade nylon housing• Standard receptacle housings• For applications experiencing high vibration
or conductor strain
• Funnel entry• Internal wire stop
Cross section of DISCOGRIP ™
crimp showing insulation crimpof the wire insulation.
K22 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
*AMP is a registered trademark of Tyco Electronics.**For crimp die information, refer to pages K23 to K24.
Part Number Part Description
Std.Pkg.Qty.
CA-800 Applicator: used in CP-861 electric press and uses CD-800 series die inserts. 1
CA-800EZ* Applicator: runs in the AMP* Model T and K bench presses. True “quick change”applicator — no additional plates are necessary. Slide right into the press for easychangeover. Uses CD-800 Series Die inserts.
1
CA9 CA9 EZAIR ™ Applicator: terminates the entire REEL SMART ™ product line. This greatlyreduces set up and maintenance time and increases productivity. This patentedapplicator is so smart it automatically adjusts feed stroke to the correct pitch andlength for the entire product line. Crimp die changeover in less than 1 minute,minimizes down-time and increases productivity. Fast, easy loading of terminal partswithout special instructions or set-up personnel. Simply feed the parts strip into theapplicator. All the necessary adjustments are made by the dies and the automatic feed stroke.Used in CP-862 electric press.Safety lockout guard ensures operator safety.Positive stop adjustment rings allow for electrical and insulation crimp adjustments asdesired. Designed for use in wire processing machines manufactured by Komax, AMP,ShinMaywa, Artos and Megomat. Uses CD9 Series Die inserts.
1
Electric Flywheel Presses
*Applicator shown, sold separately.
Part Number Part Description
Std.Pkg.Qty.
CP-861* Electric flywheel press:4000+ terminations per hour Operates on 120 AC current Resettable counter Overall size (with reel): width: 33" depth: 19" height: 41"Total weight (without reel): 205 lbs.Includes foot switch.
1
CP-862* Electric flywheel press:4000+ terminations per hourOperates on 115 VAC currentOverall size (with reel): width: 33" depth: 19" height: 41"Total weight (without reel): 205 lbs.Includes foot switch
1
Die Sharpening Kits• Used to resharpen cutting edges and maintain reliability of
CD-800 and CD9 series cutter dies
Part Number Part DescriptionStd. Pkg.
Qty.
DSF-RS For use with black oxide cutter dies. 1
DSF-NP For use with nickel-plated cutter dies. 1
REEL SMART ™ Tooling**
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). K23
Die Information Chart
TA13721A01 = 60/40 Solder Slug with 1/8" (.125) outer diameter.TA13722A01 = 60/40 Solder Slug with 3/16" (.188) outer diameter.(1) Insulation Support: Minimum wire insulation strain relief for normal applications.Plastic & DISCOGRIP ™ insulation Crimp: Secondary wire insulation strain relief for high vibration or conductor strain applications.Metal Insulation Grip: Maximum wire insulation strain relief for high vibration or conductor strain applications.***Modified lower die for barrel insulated disconnects DV-B series. Available as a complete die set or just lower die assembly.
CD-800-4 12 – 18 Red Insulation Support DNF-FIB, DNF-FIM,DNF-FIMB, DNF-LPB
TD13833C06CD-800-4, 10
TD13505C02CD-800
C-4
TD17758B01C-4, 10
CD-800-5 16 – 14 Blue Insulation Support DNF-FIB, DNF-FIM,DNF-FIMB, DNF-LPB
TD13634C05CD-800-5, 11
TD13508C02CD-800
C-5
TD17759B01C-5, 11
CD-800-6 22 – 18 Red Insulation Support DNF-FIBX TD13652C04CD-800
-6
TD13499C02CD-800
C-6
TD17760B01C-6
CD-800-7 22 – 18 Red Insulation Support DNF-110FIB, DNF-111FIB, DNF-112FIB
.125 3.18 TD13477C05CD-800-7, 12
TD13492C03CD-800
C-7
TD17761B01C-7, 12
CD-800-8 16 – 14 22 – 18 16 – 14
Blue /Red /Blue
Insulation Support DNF-FIBX / DNF-FIMX / DNF-FIMX
.188 4.78 TD13481C06CD-800
-8
TD13502C03CD-800
C-8
TD17762B01C-8
CD-800-9 22 – 14 Red /Blue
Insulation Support DNFR-FIB .125 3.18 TD13479C05CD-800
-9
TD13495C02CD-800
C-9
TD17763B01C-9
CD-800-10 22 – 18 Red DISCOGRIP ™
Insulation CrimpDPF-FIB, DPF-FIM,
DPF-FIMB, DPF-LPB
.188 4.78
TD13633C06CD-800-4, 10
TD16233C02CD-800
C-10
TD17758B01C-4, 10
CD-800-11 16 – 14 Blue DISCOGRIP ™
Insulation CrimpDPF-FIM, DPF-FIMB /
DPF-FIB, DPF-LPBTD13634C05
CD-800-5, 10
TD16243C01CD-800
C-11
TD17759B01CD-5, 11
CD-800-12 22 – 18 Red DISCOGRIP ™
Insulation CrimpDPF-110FIB, DPF-111FIB
.125 3.18 TD13477C05CD-800-7, 12
TD16235C02CD-800
C-12
TD17761B01C-7, 12
CD-800-13 12 – 10 Yellow Insulation Support /DISCOGRIP ™
Insulation Crimp
DNF-FIB / DPF-FIB
.188 4.78 TD19116C03CD-800
-13
TD19115C05CD-800
C-13
TD19424B01C-13
CD-800-14 22 – 18 16 – 14
Red /Blue
Metal InsulationCrimp
DNG-FL .125 3.18 TD22943C01CD-800
-14
TD22944C01CD-800
C-14
TD22960B01C-14
CD-800-15 22 – 18 Red Metal InsulationCrimp
DNG-FB
.188 4.78
TD22945C01CD-800
-15
TD22946C01CD-800
C-15
TD22961B01C-15
CD-800-16 16 – 14 Blue Metal InsulationCrimp
DNG-FB TD22947C01CD-800
-16
TD22948C01CD-800
C-16
TD22962B01C-16
CD-800-17 12 – 10 Yellow Insulation Support BSN TD23601C01CD-800-17
TD23600C01CD-800-17
TD23612B01CD-800-17
CD-800-18 12 – 10 Yellow Plastic InsulationCrimp
DNF-FIMB TD13475C06CD-800-18
TD23773C01CD-800-18
TD17757B01CD-800-18
SupportProducts
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
K24
Index
Die Information Chart (continued)
TA13721A01 = 60/40 Solder Slug with 1/8" (.125) outer diameter.TA13722A01 = 60/40 Solder Slug with 3/16" (.188) outer diameter.(1) Insulation Support: Minimum wire insulation strain relief for normal applications.Plastic & DISCOGRIP ™ Insulation Crimp: Secondary wire insulation strain relief for high vibration or conductor strain applications.Metal Insulation Grip: Maximum wire insulation strain relief for high vibration or conductor strain applications.***Modified lower die for barrel insulated disconnects DV-B series. Available as a complete die set or just lower die assembly.
Part NumberColorCode
AWGWire
Range Wire Insulation Strain
Relief Part No. Prefix
60/40 SolderSlug Dia. Spare Part Number
In. mm Crimp Die Cutter Die Lower Die
CD9-1A
Red
22 – 1622 – 1622 – 1822 – 18
Insulation Support /Plastic Ins. Crimp /Plastic Ins. Crimp /
‡For clear, add “C” to end of part number package suffix (Example HSTT05-48-QC). Contact customer service for additional color information.^Meets Mil Spec AMS-DTL-23053/5 Class 1, except clear which is manufactured from non-flame retardant polyolefin cross-linked material and meets AMS-DTL-23053/5 Class 2.^^^Meets Mil Spec AMS-DTL-23053/5 Class 3.
Heat Shrink
SupportProducts
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
K26 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
*Colors include clear^^^, red, yellow, green, blue and white.^Meets Mil Spec AMS-DTL-23053/5 Class 1.^^^Meets Mil Spec AMS-DTL-23053/5 Class 3.‡Meets Mil Spec AMS-DTL-23053/5 Class 1 except clear which is manufactured from non-flame retardant polyolefin cross-linked material and meets AMS-DTL-23053/5 Class 2.
• Small package fits easily in tool box• Shrink ratio of 2:1 insulates a wide range
of diameters and irregular shapes
• Cross-linked, UV resistant materialimproves flame retardancy, chemicaland temperature resistance
Except Clear
Part Number Material Color
Length Max. Recovered
I.D.Min. Expanded
I.D.Nominal
Diameter/Size
Nominal Recovered
Wall Thickness TemperatureRange
Std.Pkg.Qty.In. mm In. mm In. mm In. mm
Black Only — Single Diameter — VW-1 Rated Heat ShrinkHSTTV06-Y
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). K29
PANACEA® LS7 Hand-Held Thermal Transfer Printer and Accessories
*Cannot be used to charge batteries.For detailed information on the PANACEA ® LS7 Hand-held Thermal Transfer Printer, request product bulletin SA-IDCB1000A.
VIPER ™ LS6 Portable Thermal Transfer Printer and Accessories
For a full product offering on the VIPER ™ LS6 Portable Thermal Transfer Printer, request product bulletin SA-ID07BR01B.
• Multi-purpose printer features the ability to create cable labels with repeat legends, continuous tapes, component labels, bin markers and safety/facility identification
• High quality thermal transfer print for professional looking labels that will not smear
• Fast loading label cassette includes bothlabel material and ribbon to make changing labels easy
• Advanced functions including repeat legend,serialization, vertical and horizontal lines, symbol library and memory
• Six AA alkaline batteries and hardsidecase included
• Create wiremarkers, heat shrink labels, continuous tapes, component labels, bin markers, pipe markers, safety/facility identification and network connectivity labels
• High quality thermal transfer print for professional looking labels that will not smear
• AC adapter included so you can start printingright out of the box
• Serial port / PC interfacing• Fast loading ribbon cartridge lets you slide,
lock and go!
• 128K file memory reduces setup time by recalling frequently used labels
• Nickel metal hydride battery provides longerbattery life
• Advanced functions including serialization, barcode printing, vertical and horizontal lines,date and time stamp, variety of font sizes anda symbol library containing over 35 electrical,safety and network symbols
Part Number Part Description
Std.Pkg.Qty.
Std.Ctn.Qty.
LS6-KIT Includes printer, 120V AC adapter/charger, LS6-RW-BLK ribbon, hardsidecarrying case and operator’s manual.
1 —
LS6-RWBLK Black wax ribbon, 2" x 100'. For use with self-laminating vinyl, heat shrink andvinyl cloth materials.
1 6
LS6-RRBLK Black resin ribbon, 2" x 100'. For use with polyester, polyolefin andvinyl materials.
1 6
LS6-RRWHT White resin ribbon, 2" x 75'. For use with clear and colored polyester andvinyl tapes.
1 6
LS6-RHBLK Black hybrid ribbon, 2" x 100'. For use with self-laminating vinyl, heat shrinkand vinyl cloth materials.
1 6
LS6-BP Replacement battery pack. 1 6
LS6-ACS Replacement 120V AC adapter/charger. 1 —
LS6-PCKIT PC interface kit includes serial cable and VIPERLINK ™ Software. 1 —
LS6-CLN Cleaning kit. 1 5
Labeling & Administration
SupportProducts
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
K30 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
PAN-QUIK ™ LS3E Hand-Held Dot Matrix Printer and Accessories
For detailed information on the PAN-QUIK ™ LS3E Hand-held Dot Matrix Printer, request product bulletin SA-101N398A-ID.
• Lightweight, versatile printer for high quality labelsthat you can print anytime, anywhere
• Flexibility to print self-laminating cable labels, heatshrink labels and network system component labelsfaster than other hand-held dot-matrix printers
• Features the QUIK-KEY ™ Fast Label FormattingSystem for reduced set-up time
• 20Kb file storage memory saves time whenproducing frequently used labels
• Automatic serialization and legend repeat functions• Automatic recall of last legend entered so there is no
need to re-enter information after shut-off orrecharging battery pack
• Rotated legends allow printing of continuous stripsfor marking terminal blocks, patch panels and more!
Part Number Part DescriptionStd. Pkg.
Qty.Std. Ctn.
Qty.
LS3E-KIT Includes printer, battery pack, battery charger, printer ribbon, wrist strap andoperator’s manual, plus LS3EAK-S AC adapter and carrying case.
1 —
LS3-RIB LS3E Ribbon. 1 6
Thermal Transfer Ribbons for use with the TDP43M Thermal Transfer Desktop PrinterAvailable in three types:• Resin for harsh environments
• Hybrid for printing on a wide range of materials• Wax for general purpose labeling
Order number of ribbons required.
Part Number Part DescriptionHeight Length
Std.Pkg.Qty.
Std.Ctn.Qty.In. mm Ft. M
RMH2BL Black, hybrid thermal transfer ribbon. For use with polyester,heat shrink, vinyl and vinyl cloth.
2.52 63.50 240.0 73.0 1 12
RMH4BL Black, hybrid thermal transfer ribbon. For use with polyester,heat shrink, vinyl and vinyl cloth.
4.33 110.00 240.0 73.0 1 12
RMR2BL Black, resin thermal transfer ribbon. For use with polyester andvinyl materials.
2.52 63.50 240.0 73.0 1 12
RMR2WH White, resin thermal transfer ribbon. For use with polyester andvinyl materials.
2.52 63.50 240.0 73.0 1 12
RMR4BL Black, resin thermal transfer ribbon. For use with polyester andvinyl materials.
4.33 110.00 240.0 73.0 1 12
RMR4BU Blue, resin thermal transfer ribbon. For use with polyester andvinyl materials.
4.33 110.00 240.0 73.0 1 12
RMR4GR Green, resin thermal transfer ribbon. For use with polyesterand vinyl materials.
4.33 110.00 240.0 73.0 1 12
RMR4RD Red, resin thermal transfer ribbon. For use with polyester andvinyl materials
4.33 110.00 240.0 73.0 1 12
RMR4WH White, resin thermal transfer ribbon. For use with polyester andvinyl materials.
4.33 110.00 240.0 73.0 1 12
RMW2BL Black, wax thermal transfer ribbon. For use with self-laminatingvinyl and heat shrink.
2.52 63.50 240.0 73.0 1 12
RMW4BL Black, wax thermal transfer ribbon. For use with self-laminatingvinyl and heat shrink.
4.33 110.00 240.0 73.0 1 12
TDP43M Thermal Transfer Desktop Printer and Accessories• It’s Quick! – Custom capability allows high
quality labels to be produced in-house for mediumvolume applications
• Choose from an assortment of self-laminatingwire markers, heat shrink markers, vinyl clothwire/cable markers, continuous vinyl tape andcomponent labels
• Produces high quality, 300 dpi thermal transfer printfor labels that are both professional and robust
• Works with most standard PC’s and labeling printingsoftware including PANDUIT ® EASY-MARK ™ orPAN-MARK ® for WINDOWS^ Labeling Software
• Flexibility and speed make the TDP43M a useful toolfor your on-demand labeling needs!
^WINDOWS is a registered trademark of Microsoft Corp. in the United States and/or other countries.For detailed information on the TDP43M Thermal Transfer Desktop Printer, request product bulletin SA-IDCB17.
Part Number Part Description
Std.Pkg.Qty.
TDP43M 300 dpi printer; includes printer, PANDUIT ® EASY-MARK ™ Labeling Software, RMH4BL hybrid blackribbon, 120-220 VAC adapter, power cords (US and Euro), manual and quick start card.
1
TDP43M-RS External label roll stand – used to rear feed labels that are not supplied on 1.00" core. 1
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). K31
PAN-MARK ® for WINDOWS^ Labeling Software
For detailed information on PAN-MARK ® for WINDOWS^ Labeling Software, request product bulletin SA-IDCB1043A.^WINDOWS, EXCEL and ACCESS are registered trademarks of Microsoft Corp. in the United States and other countries.*True Type is a registered trademark of Apple Computing.
• PAN-MARK ® for WINDOWS^ Labeling Softwarehas preloaded and ready to use, thermaltransfer, dot-matrix, laser and ink jet label formats.
• ODBC (Open Data-Base Connectivity) allowsimporting of information from electronic databases such as EXCEL^ and ACCESS^directly onto the label formats
• On-line help function files, including theTIA/EIA-606-A Labeling Compliance Brochurethat assists in understanding the TIA/EIA-606-A standard and insure networklabeling compliance
• Easy to install and supplied on CD-ROM
• Uses full range of WINDOWS^ fonts includingTrue Type* fonts
• Use image library to add commonly used symbols to your labels (fax, data, voice, etc.)
• Import bitmap (.bmp) graphic images intoa label
• Create alpha and numeric serializations
System Requirements:• WINDOWS^ 95, 98, Me, 2000, NT 4.x, and
XP; minimum 486 processor; minimum 8MBof RAM; 30 MB hard drive space
EASY-MARK ™ Labeling Software
For detailed information on EASY-MARK ™ Labeling Software, request product bulletin SA-IDCB02.^WINDOWS is a registered trademark of Microsoft Corp. in the United States and other countries.*True Type is a registered trademark of Apple Computing.
• WYSIWYG — What You See Is What You Get— program allows you to see labels on-screenas they will appear when printed
• Quick text entry — feature allows you to enter text on individual labels or over an entire range
• Advanced alpha and numeric serializationspeeds label creation
• All PANDUIT ® thermal transfer, dot-matrix,laser and inkjet label formats
• On-line help function files, including theTIA/EIA-606-A Labeling Compliance Brochure that assists in understanding theTIA/EIA-606-A standard and insure networklabeling compliance
• Easy to install and supplied on CD-ROM• Uses full range of WINDOWS^ fonts including
True Type* fonts
System Requirements:• WINDOWS^ 95, 98, Me, 2000, NT4.x, and XP;
minimum 486 processor; minimum 32 MBRAM; 64 MB hard drive space
Part Number Part Description
Std.Pkg.Qty.
Std.Ctn.Qty.
PROG-WIN2CD WINDOWS^ labeling software, CD-ROM, compatible with WINDOWS^ 95, 98,Me, 2000, NT 4.x and XP.
1 10
Part Number Part Description
Std.Pkg.Qty.
Std.Ctn.Qty.
PROG-EMCD WINDOWS^ labeling software, CD-ROM, compatible with WINDOWS^ 95, 98,Me, 2000, NT 4.x and XP.
1 10
SupportProducts
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
K32 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Self-Laminating Labels for Wire and Cables
*Order number of labels required in multiples of Std. Pkg. Qty.
• Labels for wire/cable applications arespecifically sized and consistent across printtechnologies: laser/ink jet, thermal transfer,dot matrix and portable printers
• PANDUIT ® labeling software packages includeall label formats to quickly and economicallyidentify wires and cables
• White print-on area with clear overlaminateprotects legend for clear anddurable identification
*Order number of rolls required.Also available on 3" core size, replace S100X075VA* with T.
Self-Laminating Labels for TDP43M Thermal Transfer Desktop Printer Supplied on Rolls
K34 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
Heat Shrink Labels for Wire and Cables• Produce durable, high quality chemical/abrasion
resistant heat shrink markers• Pre-cut tubing mounted on plastic carrier• Flattened polyolefin material• Service temperature range: -22° to 220°
(-30°C to 105°C)• Shrink ratio 3:1 at 212°F (100°C)
• Meets UL Standard 224 for flammability• For best results when using desktop thermal
transfer printers use PANDUIT ® hybrid thermaltransfer ribbon, TTRH-BL found on page K30.When using the VIPER ™ LS6 Portable ThermalTransfer Printer, use with LS6-RHBLK found on page K29.
‡Bulk packaging available, add *-B to end of part number. Bulk packaging quantity is 5 times the standard roll quantity.Also printable with pin feed for dot matrix printers.Other colors available, contact PANDUIT ® Customer Service, 800-777-3300.
Heat Shrink Labels for VIPER ™ LS6 Portable Thermal Transfer Printer Supplied on Rolls
Heat Shrink Labels for Thermal Transfer Desktop Printers Supplied on Rolls
Part Number Part Description Width LengthMin. Cable
K36 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.
Index
PAN-TY ® Cable Ties• One piece construction for consistent
performance and reliability• Lowest threading force of any one piece cable
tie in the industry
• Versatile cable ties that can be used in countless applications
• Material: Nylon 6.6
Except PLT10LH,PLT5H/6H/8H/13H
& all EH Ties
For cable tie installation tooling, see page K41.
HOT STAMPING — Custom Printed Cable TiesA wide variety of information can be imprinted on PANDUIT ® cable ties, marker ties and markerplates. Printing utilizes a durable “Hot Stamping” process that is an economical and convenientway to permanently mark cable ties. Customize with a wide variety of choices:
• Seven basic text colors
• Special logos and diagrams (with customer supplied camera-ready artwork)
• Alphanumeric and sequential numbering for serialization
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). K41
Cable Tie Installation Tools
Hand Operated Tools — Installer-Controlled Tension and Cut-Off
• Tool-controlled tension and cut-off providesconsistent results and speeds installation tolower installed cost
• Ergonomic tools (GTS & GTH) are lightweightand comfortable to use, reducingoperator fatigue
• Tools provide flush cut-off of cable tie, whichlimits exposure to sharp edges
• Tension adjustment conveniently locatedand easy to change
• Replacement blades available
Hand-Operated Tools — Tool-Controlled Tension and Cut-Off
Part Number Part Description
Std.Pkg.Qty.
STS2 Installs Miniature, Intermediate and Standard cross section cable ties. Install cable tiearound bundle and tension tie by squeezing tool handle. Reduce tension slightly andtwist tool 1/4 turn either direction to cut off excess cable tie.
Color identification: black.Weight: 2.5 oz. (71g).
1
STH2 Installs Standard, Light-Heavy and Heavy cross section cable ties. Inexpensive,maintenance-free, all purpose tool. Ergonomic handle design and short handle span.Top loading feature for right or left-handed users. Install cable tie around bundle andtension tie by squeezing tool handle. Reduce tension slightly and twist tool 1/4 turneither direction to cut off excess cable tie.
Color identification: red.Weight: 2.5 oz. (71g).
1
ST2EH Installs Light-Heavy, Heavy and Extra-Heavy cross section cable ties. Durable all steelconstruction with comfortable rubber handles. Install cable tie around bundle andtension tie by squeezing tool handle. Reduce tension slightly and twist tool 1/4 turneither direction to cut off excess cable tie.
Color identification: black.Weight: 16 oz. (454g).
1
Part Number Part Description
Std.Pkg.Qty.
GTS Installs Subminiature, Miniature, Intermediate and Standard cross section cable ties.Qualified Product Listed per Mil. Std. MS90387-1 and Mil. Spec. MIL-T-81306A.
Color identification: black trigger handle.Body: gray plastic housing with black selector knob.Weight: 8.8 oz. (249g).
1
GTH Installs Standard, Heavy-Standard, Light-Heavy and Heavy cross section cable ties.
Color identification: red trigger handle.Body: gray plastic housing with red selector knob.Weight: 11.2 oz. (318g).
1
GS4EH Installs Light-Heavy, Heavy and Extra-Heavy cross section cable ties.
Color identification: blue trigger handle.Body: gray metal housing with blue selector knob.Weight: 16 oz. (454g).
1
Cable Tie Installation Tools for use with PANDUIT ® cable ties on pages K36 to K39.
• Economical series of tools for maintenance or construction applications• Operator-controlled tension and cut-off• Excellent tool for low volume applications
SupportProducts
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
K42 Prime items appear in BOLD.
Index
NOTES
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). L1
TTEECCHHNNIICCAALL SSPPEECCIIFFIICCAATTIIOONN AANNDD SSEELLEECCTTIIOONN IINNFFOORRMMAATTIIOONNThe following pages provide information helpful in specifying PANDUIT ® Power and GroundingConnectors and selecting the appropriate connector and tooling for your applications.
TTEESSTTIINNGG AAGGEENNCCIIEESS AANNDD TTEESSTT SSTTAANNDDAARRDDSSUNDERWRITERS LABORATORY, INC.Is an independent, not-for-profit safetytesting and certification organization basedin the United States. Underwriters Laboratory, Inc.Standards applicable to specified PANDUIT ®
PAN-TERM ® Terminals and PAN-LUG ™ PowerConnectors: ◆ UL 486A Wire Connectors and Soldering Lugs
for Use with Copper Conductors — Coverspressure wire connectors and soldering lugs foruse with copper conductors according to theNational Electrical Code NFPA 70.
◆ UL 486B Wire Connectors for Use withAluminum Conductors
◆ UL 467 Grounding and Bonding Equipment◆ UL 310 Electrical Quick-Connect Terminals◆ UL 94 Test for Flammability of Plastic Materials
for Parts in Devices and Appliances
CANADIAN STANDARDSASSOCIATIONCanadian Standards Association is a not-for-profitmembership based association serving business,industry, government, and consumers in Canada andthe global market place. C.S.A. works in Canada andaround the world to develop standards that enhancepublic safety and health.Canadian Standards Association standards that areapplicable to specified PANDUIT ® PAN-TERM ®
Terminals and PAN-LUG ™ Power Connectors:◆ C22.2 NO. 65-03 Wire Connectors◆ C22.2 NO. 41-M1987 (R1999) Grounding and
Bonding Equipment
NATIONAL ELECTRICAL MANUFACTURERSASSOCIATION NEMA NEMA is the largest trade association in the U.S.representing electro-industry manufacturers. NEMAdevelops industry standards that are in the bestinterest of the industry and users of its products.NEMA standards for electrical power connector forsubstations covers uninsulated connectors and busbar supports which are made of metal and intendedfor use in substations. Included in the standard aremanufacturing standards for bolt hole sizes andspacings for terminal connectors with single tangs.PANDUIT ® offers connectors that meet NEMAmanufacturing standards and these are speciallynoted as listed within this catalog.
TELECOMMUNICATIONS INDUSTRYASSOCIATION TIA The Telecommunications Industry Association is a leadingU.S. non-profit trade association serving the communicationsand information technology industry. TIA represents providersof communications and information technology products andservices for the global marketplace through its corecompetencies in standards development.
ALLIANCE FOR TELECOMMUNICATIONSINDUSTRY SOLUTIONS ATIS ATIS is a technical planning and standardsdevelopment organization that is committed to rapidly developing andpromoting technical and operations standards for the communications andrelated information technologies industry worldwide using a pragmatic,flexible and open approach. Over 1,200 participants from more than 400communications companies are active in ATIS' 22 industry committees, andits Incubator Solutions Program. www.atis.org◆ J-STD-607-A-2002, Commercial Building Grounding (Earthing) and
Bonding Requirements for Telecommunications is jointly developed by TIA/EIA and ATIS' technical committee T1E1. This document is available on the ATIS Document Center at www.atis.org.
Adhering to the grounding principles outlined in J-STD-607-A-2002 helpsensure that telecommunications equipment and systems operate reliably. Asstated in J-STD-607-A-2002, the preferred means of connecting conductorsto busbars is by using two-hole irreversible compression lugs listed by anationally recognized testing laboratory (NRTL) such as UL. The PANDUIT ®
PAN-LUG ™ line of copper compression connectors meets these requirements,in all of the barrel sizes specified by the 607 standard.
NEBS LEVEL 3 APPROVAL AS TESTED BYTELCORDIA TECHNOLOGIESPANDUIT ® is the first in the industry to have a system of coppercompression lugs and splices (#8 AWG - 1,000 kcmil) and crimping toolsphysically and rigorously tested by Telcordia Technologies to meet NetworkEquipment-Building Systems (NEBS) Level 3 compliance.Telcordia Technologies, formerly known as Bellcore, serves as the testingagency for the Regional Bell Operating Companies.NEBS was developed by Bellcore and is currently maintained by TelcordiaTechnologies. NEBS was developed to standardize requirements for CentralOffice Equipment and to develop criteria for personal safety, protection ofproperty and operational continuity.NEBS level 3 Criteria is the minimum level of environmental compatibilityneeded to provide maximum assurance of equipment operability within thenetwork facility environment. The Level 3 Criteria is the highest assuranceof product operability. Products that meet NEBS level 3 Criteria are suitedfor equipment applications which demand minimal service interruptionsover the life span of the equipment.
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
L2
Index
Tooling Selection Guide for PANDUIT ® Terminals, Splices and Disconnects
PANDUIT ®
TerminalSeries
TerminalDescription
Std. WireRange(AWG)
WireStrip
Length(In.)
[+1/32;-0]
Plier Tools Controlled Cycle Hand Tools
Crimp Headsfor Pneumatic
CT-600 Tool Mechanical
CT-
100
CT-
160
CT-
200
CT-
260
CT-
300-
1
CT-
310
CT-
400
CT-
460
CT-
1014
CT-
1015
CT-
1525
CT-
1550
CT-
1551
CT-
1570
CT-
1701
CT-
500C
H
CT-
520C
H
CT-
550C
H
CT-
570C
H
CT-720
BS Non-InsulatedButt Splices
26-22 1/4 X X22-18 9/32 X X X X X X16-14 9/32 X X X X X X12-10 9/32 X X X X X X X
J Non-Insulated WireJointsJ214-312 18-12 1/2 X XJ318-412 18-10 1/2 X XJ216-410 16-10 3/4 X
JN Nylon Insulated WireJointsJN224-318 24-14 7/16 X X X X X X X XJN218-216 22-14 7/16 X X X X X X XJN418-212 18-12 1/2 X X X X X XJN314-412 16-10 5/8 X
P-HDR Non-Insulated HeavyDuty Rings
16-12 9/32 X X X X X X X
P-P Non-InsulatedPin Terminals
22-18 9/32 X X X X X X16-14 9/32 X X X X X X12-10 9/32 X X X X X X X
P-R Non-Insulated LargeRing Terminals
8 3/8 X6 7/16 X4 1/2 X2 1/2 X
See Crimping Tools Tab — Section G
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
L4
Index
Tooling Selection Guide for PANDUIT ® Terminals, Splices and Disconnects (continued)
*TEFZEL is a registered trademark of E.I. DuPont de Nemours Co.‡Use Die CD--700P-8-2.
*Half width dies.**CD-920 Dies can be used with CT-940CH and CT-2940 tools with the CT-940-AD adapter.① CT-1700 crimp die pockets are integrated into the tool frame.② Minimum size: 4 AWG Lugs and Splices.
Installation Tooling and Die Selections for:For use withCopper
Conductors
PANDUIT ® (See Crimping Tools Tab — Section G) Thomas & Betts
CT-1700① CT-720
CT-920, CT-920CH,CT-930, CT-930CH,
CT-2930, CT-930LPCH,CT-2931, CT-2940**,
CT-2920, CT-940CH**
CT-980, CT2980,CT-980CH,CT-2981,
CT-980LPCH,CT-2950***
CT-2001,CT-2002
TBM20S,TBM25S TBM5 TBM8
PANDUIT ® Part NumberStd.WireSize
WireStrip
Length(In.)Lug Splice Die Part Number / Color Code & Die Index Number / (Number Of Crimps)
LCAS8 SCSS88
AWG7/16
Red P21 (2)
CD-720-1 Red P21
(1)
CD-920-8 Red P21
(1)—
CD-2001-8 Red P21
(1)
Red (2)
Red (1)
Red (1)
LCAS6 — 6AWG
1/2 Blue P24 (2)
CD-720-1 Blue P24
(1)
CD-920-6 Blue P24
(1)
STD (1)
CD-2001-6 Blue P24
(1)
Blue (2)
Blue (1)
Blue (1)— SCSS6 7/16
LCAS4 — 4AWG
9/16 Gray P29(2)
CD-720-1 Gray P29
(1)
CD-920-4 Gray P29
(1)
STD (1)
CD-2001-4 Gray P29
(1)
Gray (2)
Gray (1)
Gray (1)— SCSS4 7/16
LCAS2 SCSS22
AWG9/16
Brown P33 (2)
CD-720-1 Brown P33
(1)
CD-920-2 Brown P33
(1)
STD (1)
CD-2001-2 Brown P33
(1)
Brown (2)
Brown(1)
Brown (1)
LCAS1 — 1AWG
5/8 Green P37(3)
CD-720-2 Green P37
(1)
CD-920-1 Green P37
(1)
STD (1)
CD-2001-1 Green P37
(1)—
Green(1)
Green (1)— SCSS1 11/16
LCAS1/0 SCSS1/01/0
AWG11/16 —
CD-720-2 Pink P42
(1)
CD-920-1/0 Pink P42
(1)
STD (1)
CD-2001-1/0 Pink P42
(1)—
Pink (1)
Pink (1)
LCAS2/0 SCSS2/02/0
AWG3/4 —
CD-720-2 Black P45
(2)
CD-920-2/0 Black P45
(1)
STD (1)
CD-2001-2/0 Black P45
(2)—
Black (2)
Black (2)
LCAS3/0 — 3/0AWG
13/16—
CD-720-2 Orange P50
(2)
CD-920-3/0 Orange P50
(1)
STD (1)
CD-2001-3/0 Orange P50
(2)—
Orange (2)
Orange (2)— SCSS3/0 3/4
LCAS4/0 — 4/0AWG
15/16—
CD-720-3 Purple P54
(2)
CD-920-4/0 Purple P54
(1)
STD (1)
CD-2001-4/0 Purple P54
(2)—
Purple (2)
Purple (2)— SCSS4/0 13/16
LCAS250 SCSS250250
kcmil1-1/16 —-
CD-720-3 Yellow P62
(2)
CD-920-250 Yellow P62
(1)
STD (1)
CD-2001-250 Yellow P62
(2)—
Yellow (2)
Yellow (2)
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). L7
Types LCAS & SCSS (continued)
*Half width dies.**CD-920 Dies can be used with CT-940CH and CT-2940 tools with the CT-940-AD adapter.① CT-1700 crimp die pockets are integrated into the tool frame.② Minimum size: 4 AWG Lugs and Splices.
Installation Tooling and Die Selections for:For use withCopper
Conductors
Thomas & Betts Burndy Penn-Union Greenlee
TBM12,13642M
TBM15,TBM15I,
TBM15BSCR
TBM8-750M-I,TBM8-750,
TBM8-750BSCR,TBM750BSCR②
TBM14M,TBM14BSCR,BPLT14BSCR,
13100A
Y2MR,Y1MRTC,
Y1MR MY29
Y35,Y35BH, Y39,Y39BH,
Y45, Y46, Y750,Y750-2, Y750BH,
Y750BH-2,Y750HS, PAT750,BAT750, BAT35
Y644M,Y644HS,
Y644MBH,PAT644,BAT644 VC6 TDY-1 1989
Die Part Number / Color Code & Die Index Number / (Number Of Crimps)
21 (1)
21 (1)
STD (1)
21 (1)
Red (2)
#8 (1)
U8CRTRed 49
(1)— — — —
24 (1)
24 (1)
STD (1)
24 (1)
Blue (2)
#6 (1)
U5CRT Blue 7
(1)
STD(1)
STD(1)
— —
29(1)
29 (1)
STD(1)
29 (1)
Gray (2)
#4 (1)
U4CRT Gray 8
(1)
STD(1)
STD(1)
STD(1)
STD(1)
33 (1)
33 (1)
STD(1)
33 (1)
Brown(2)
#2 (1)
U2CRT Brown 10
(1)
STD(1)
STD(1)
STD(1)
STD(1)
37(1)
37 (1)
STD(1)
37 (1)
—#1(1)
U1CRT Green 11
(1)
STD(1)
STD(1)
STD(1)
STD(1)
42 (1)
42H* (2)
STD(1)
42H*(2)
—1/0 (1)
U25RT Pink 12
(1)
STD(1)
STD(1)
STD(1)
STD(1)
45 (1)
45 (1)
STD(1)
45 (1)
—2/0 (1)
U26RT Black 13
(1)
STD(1)
STD(1)
STD(1)
STD(1)
50 (1)
50 (1)
STD(1)
50 (1)
—3/0(1)
U27RT Orange 14
(1)
STD(1)
STD(1)
STD(1)
STD(1)
54 (1)
54H* (2)
STD(1)
54H* (2)
—-4/0(1)
U28RT Purple 15
(1)
STD(1)
STD(1)
STD(1)
STD(1)
62 (1)
62 (1)
STD(1)
62 (1)
—250 (1)
CD-920-250 Yellow P62
(1)
STD (1)
CD-2001-250 Yellow P62
(2)—
Yellow (2)
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
L8
Index
Types LCA, LCAN, LCD, LCDN and SCS
**CD-920 dies can be used with CT-940CH and CT-2940 tools with CD-940-DA adapter.① Maximum size with CT-2950 is 500 kcmil lugs, 250 kcmil splices.② CD-940 dies to be used exclusively with CT-940CH and CT-2940 tools.③ Half width dies.④ The CT-1700 crimp pockets are integrated into the crimp head.⑤ Maximum size: 250 kcmil lugs and splices.⑥ Minimum size: 4 AWG lugs and splices.
Installation Tooling and Die Selections for:For use withCopper
Conductors
PANDUIT ® (See Crimping Tools Tab — Section G) Thomas & Betts
CT-1700④ CT-720
CT-920, CT-920CH,CT-930, CT-930CH,
CT-930LPCH⑤,CT-2920, CT-2930,
CT-2931,CT-940CH**,
CT-2940**
CT-980,CT-2980,
CT-980LPCH⑤,CT-980CH,CT-2950①,CT-2981
CT-2001,CT-2002
TBM20S,TBM25S
TBM5,TBM8
TBM12,13642M
PANDUIT ®
PartNumber
Std. WireSize
WireStrip
Length(In.)
L = Lug S = Splice
Die Part Number / Color Code & Die Index Number / (Number of Crimps)LCA8
8 AWG9/16 Red P21
(2)
CD-720-1 Red P21
(1)
CD-920-8 Red P21
(1)—
CD-2001-8 Red P21
(1)
Red 21 (2)
Red 21 (1)
Red 21 (1)
LCAN8LCD8LCDN8SCS8 1-1/16
LCA6
6 AWG 13/16Blue P24
(2)
CD-720-1 Blue P24
(1)
CD-920-6 Blue P24
(1)—
CD-2001-6 Blue P24
(1)
Blue 24 (2)
Blue 24 (1)
Blue 24 (1)
LCAN6LCD6LCDN6SCS6LCA4
2 AWGSOL
4-3 AWGSTR
13/16Gray P29
(2)
CD-720-1 Gray P29
(1)
CD-920-4 Gray P29
(1)
STD (1)
CD-2001-4 Gray P29
(1)
Gray 29 (2)
Gray 29 (1)
Gray 29 (1)
LCAN4LCD4LCDN4SCS4
LCA2
2 AWG 7/8Brown P33
(2)
CD-720-1 Brown P33
(1)
CD-920-2 Brown P33
(1)
STD (1)
CD-2001-2 Brown P33
(1)
Brown 33 (2)
Brown 33 (1)
Brown 33 (1)
LCAN2
LCD2
LCDN2
SCS2
LCA1
1 AWG 7/8Green P37
(3)
CD-720-2 Green P37
(1)
CD-920-1 Green P37
(1)
STD (1)
CD-2001-1 Green P37
(1)—
Green 37 (1)
Green 37 (1)
LCAN1LCD1LCDN1SCS1LCA1/0
1/0 AWG15/16
—CD-720-2 Pink P42
(1)
CD-920-1/0 Pink P42
(1)
STD (1)
CD-2001-1/0 Pink P42
(1)—
Pink 42 (1)
Pink 42 (1)
LCAN1/0LCD1/0LCDN1/0SCS1/0 7/8
LCA2/0
2/0 AWG1
—CD-720-2 Black P45
(2)
CD-920-2/0 Black P45
(2)
STD (1)
CD-2001-2/0 Black P45
(2) —
Black 45 (2)
Black 45 (1)
LCAN2/0LCD2/0LCDN2/0SCS2/0 15/16
LCA3/0
3/0 AWG1-1/8
—CD-720-2
Orange P50 (2)
CD-920-3/0 Orange P50
(2)
STD (1)
CD-2001-3/0 Orange P50
(2)—
Orange50 (2)
Orange 50 (1)
LCAN3/0LCD3/0LCDN3/0SCS3/0 1
LCA4/0
4/0 AWG1-3/16
—CD-720-3
Purple P54 (2)
CD-920-4/0 Purple P54
(2)
STD (1)
CD-2001-4/0 Purple P54
(2)—
Purple 54 (2)
Purple 54 (1)
LCAN4/0LCD4/0LCDN4/0SCS4/0 1
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
L9
Types LCA, LCAN, LCD, LCDN and SCS (continued)
For use withCopper
Conductors
Installation Tooling and Die Selections for:
Thomas & Betts Burndy Anderson Penn-Union
Greenlee
TBM15,TBM15I,
TBM15BSCR
TBM8-750M-1,TBM8-750,
TBM8-750BSCR,TBM750BSCR ⑥
TBM14M,TBM14BSCR,BPLT14BSCR,
13100A
Y2MR,Y1MR,
Y1MRTC MY29
BAT35, Y39BH,Y35BH, Y750,
Y750BH,Y750-2, Y750HS,Y750BH-2, Y39,
PAT750,Y35, BAT750 Y45, Y46
Y644M,Y644HS,PAT644,BAT644,
Y644MBH VC6 TDY-1 1989
Die Part Number / Color Code & Die Index Number / (Number of Crimps)
Red 21(1)
STD (1)
Red 21 (1)
Red 49 (1)
#8 (1)
U8CRTRed 49
(1)
U8CRTRed 49
(1)— — — —
Blue 24 (1)
STD (1)
Blue 24 (1)
Blue 7 (2)
#6 (1)
U5CRT Blue 7
(1)
U5CRT Blue 7
(1)
STD (1)
STD (1)
— —
Gray 29 (1)
STD (1)
Gray 29 (1)
Gray 8 (2)
#4 (1)
U4CRT Gray 8
(1)
U4CRT Gray 8
(1)
STD (1)
STD (1)
—STD (1)
Brown 33 (1)
STD (1)
Brown 33 (1)
Brown 10 (2)
#2 (1)
U2CRT Brown 9 [solid] /
Brown 10 [stranded] (1)
U2CRT Brown 9[solid] /
Brown 10[stranded]
(1)
STD (1)
STD (1)
STD (1)
STD (1)
Green 37 (1)
STD (1)
Green 37 (1)
—#1 (1)
U1CRT Green 11
(1)
U1CRT Green 11
(1)
STD (1)
STD (1)
STD (1)
STD (1)
Pink 42H③
(2)STD (1)
Pink 42H③
(2)—
1/0 (1)
U25RT Pink 12
(1)
U25RT Pink 12
(1)
STD (1)
STD (1)
STD (1)
STD (1)
Black 45 (1)
STD (1)
Black 45 (1)
—2/0 (1)
U26RT Black 13
(1)
U26RT Black 13
(1)
STD (1)
STD (1)
STD (1)
STD (1)
Orange 50 (1)
STD (1)
Orange 50 (1)
—3/0 (1)
U27RT Orange 14
(1)
U27RT Orange 14
(1)
STD (1)
STD (1)
STD (1)
STD (1)
Purple 54H③
(2)STD (1)
Purple 54H③
(2)—
4/0 (1)
U28RT Purple 15
(1)
U28RT Purple 15
(1)
STD (1)
STD (1)
STD (1)
STD (1)
Chart continues on Pages L10,L11 (250 kcmil to 1000 kcmil sizes)
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
L10
Index
T E R M I N A T I O N S O L U T I O N S
**CD-920 dies can be used with CT-940CH and CT-2940 tools with CD-940-DA adapter.① Maximum size with CT-2950 is 500 kcmil lugs, 250 kcmil splices.② CD-940 dies to be used exclusively with CT-940CH and CT-2940 tools.③ Half width dies.④ The CT1700 crimp pockets are integrated into the crimp head.⑤ Maximum size: 250 kcmil lugs and splices.⑥ Minimum size: 4 AWG lugs and splices.
Types LCA, LCAN, LCD, LCDN and SCS (continued)
For use withCopper
Conductors
Installation Tooling and Die Selections for:
PANDUIT ® (See Crimping Tools Tab — Section G) Thomas & Betts
CT-1700 ④ CT-720
CT-920, CT-920CH,CT-930, CT-930CH,
CT-930LPCH⑤,CT-2920, CT-2930,
CT-2931,CT-940CH**CT-2940**
CT-980,CT-2980,
CT-980LPCH⑤,CT-980CH,CT-2950①,CT-2981
CT-2001,CT-2002
TBM20S,TBM25S TBM5 TBM8
TBM12,13642M
PANDUIT ®
PartNumber
Std.WireSize
WireStrip
Length(In.)
L = Lug
S = Splice Die Part Number / Color Code & Die Index Number / (Number of Crimps)LCA250
250kcmil
1-1/4—
CD-720-3 Yellow P62
(2)
CD-920-250 Yellow P62
(2)
STD (2)
CD-2001-250 Yellow P62
(2)—
Yellow 62 (2)
Yellow 62 (2)
Yellow 62 (1)
LCAN250LCD250LCDN250SCS250 1-1/16LCA300
300kcmil
1-1/4—
CD-720-4 White P66
(2)
CD-920-300White P66
(2)
STD (2)
CD-2001-300 White P66
(2)— —
White 66 (2)
White 66H③
(1)
LCAN300LCD300LCDN300SCS300 1-1/16LCA350
350kcmil
1-1/4—
CD-720-5 Red P71
(2)
CD-920-350 Red P71
(2)
STD (2)
CD-2001-350 Red P71
(2)— —
Red 71 (2)
Red 71H③
(2)
LCAN350LCD350LCDN350SCS350 1-1/8LCA400
400kcmil
1-7/16—
CD-720-6 Blue P76
(2)
CD-920-400 Blue P76
(2)
STD (2)
CD-2001-400 Blue P76
(3)— —
Blue 76 (2)
Blue 76H③
(2)
LCAN400LCD400LCDN400SCS400 1-3/16LCA500
500kcmil
1-11/16—
CD-720-7 Brown P87
(2)
CD-920-500 Brown P87
(2)
STD (2)
CD-2001-500 Brown P87
(3)— —
Brown 87 (2)
Brown 87H③
(2)
LCAN500LCD500LCDN500SCS500 1-3/8LCA600
600kcmil
1-9/16— —
CD-920-600 Green P94
(2)
STD (2)
— — — —Green 94H③
(2)
LCAN600LCD600LCDN600SCS600 1-3/8LCA750
750kcmil
1-5/8 — —
CD-920-750 CD-940-750②
Black P106 (2)
STD (2)
— — — —Black 106H③
(2)
LCAN750LCD750LCDN750SCS750
— 1000kcmil
1-7/8 — —CD-940-1000②
White P125 (4)
— — — — — —SCS1000
Chart continues fromPages L8,L9
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). L11
T E R M I N A T I O N S O L U T I O N S
Types LCA, LCAN, LCD, LCDN and SCS (continued)
For use withCopper
Conductors
**CD-920 dies can be used with CT-940CH and CT-2940 tools with CD-940-DA adapter.① Maximum size with CT-2950 is 500 kcmil lugs, 250 kcmil splices.② CD-940 dies to be used exclusively with CT-940CH and CT-2940 tools.③ Half width dies.④ The CT1700 crimp pockets are integrated into the crimp head.⑤ Maximum size: 250 kcmil lugs and splices.⑥ Minimum size: 4 AWG lugs and splices.
Installation Tooling and Die Selections for:
Thomas & Betts Burndy AndersonPenn-Union
Greenlee
TBM15,TBM15I,
TBM15BSCR
TBM8-750M-1,TBM8-750,
TBM8-750BSCR,TBM750BSCR ⑥
TBM14M,TBM14BSCR,BPLT14BSCR,
13642M,13100A
Y2MR,Y1MR,
Y1MRTC MY29
BAT35, Y35BH,Y750, Y39BH,
Y750BH,Y750-2, Y750HS,
Y750BH-2,Y39, PAT750,Y35, BAT750 Y45, Y46
Y644M,Y644HS,PAT644,BAT644,
Y644MBH VC6 TDY-1 1989
Die Part Number / Color Code & Die Index Number / (Number of Crimps)
Yellow 62 (1)
STD (1)
Yellow 62 (1)
—-250 (1)
U29RT Yellow 16
(1)
U29RT Yellow 16
(1)
STD (1)
STD (2)
STD (1)
STD (1)
White 66 (1)
STD (1)
White 66 (1)
— —U30RT
White 17 (2)
U30RT White 17
(2)
STD (1)
STD (2)
STD (1)
STD (1)
Red 71H®(2)
STD (1)
Red 71H③(2)
— —U31RT Red 18
(2)
U31RT Red 18
(2)
STD (1)
STD (2)
STD (1)
STD (1)
Blue 76H®(2)
STD (1)
Blue 76 (1)
— —U32RT Blue 19
(2)
U32RT Blue 19
(2)
STD (1)
STD (2)
STD (1)
STD (1)
Brown 87H®(2)
STD (1)
Brown 87H®(2)
— —U34RT
Brown 20 (2)
U34RT Brown 20
(2)
STD (1)
STD (2)
STD (1)
STD (1)
Green 94H®(2)
STD (1)
Green 94H®(2)
— —U36RT
Green 22 (2)
U36RT Green 22
(2)
STD (1)
—STD (1)
—
Black 106H®(2)
STD (1)
Black 106H®(2)
— —U39RT
Black 24 (3)
U39RT Black 24
(3)
STD (1)
—STD (1)
—
125H®(2)
—125H®
(2)— — —
S44RT White 27
(4)— — — —
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
L12
Index
T E R M I N A T I O N S O L U T I O N S
Types LCB, LCBN, LCC, LCCN & SCL
For use withCopper
Conductors
*Half width dies.**CD-920 Dies can be used with CT-940CH and CT-2940 tools
with CD-940-DA adapter.① Require U Die adapter.② CD-940 Dies to be used exclusively with C-940CH tool.③ Maximum size: 500 kcmil lugs and 250 kcmil splices.
④ The CT-1700 crimp die pockets are integrated into thetool head.
⑤ Maximum size: 250 kcmil lugs and splices.⑥ Minimum size: 4 AWG lugs and splices.
Installation Tooling and Die Selections for:
PANDUIT ® (See Crimping Tools Tab — Section G) Thomas & Betts
CT-1700④ CT-720
CT-920, CT-920CH,CT-930, CT-930CH,
CT-2920,CT-2930, CT-2931,
CT-930LPCH⑤,CT-940CH**,
CT-2940**
CT-980,CT-980CH,CT-2950③,CT-2980,CT-2981,
CT-980LPCH⑤
CT-2001,CT-2002
TBM20S,TBM25S TBM5 TBM8
TBM12,13642M
PANDUIT ®
PartNumber
Std. WireSize
WireStrip
Length(In.)
L = Lug
S = Splice Die Part Number / Color Code & Die Index Number / (Number Of Crimps)LCB8LCBN8LCC8LCCN8
8 AWG11/16 Red P21
(3)
CD-720-1Red P21
(2)
CD-920-8 Red P21
(1)—
CD-2001-8 Red P21
(2)
Red 21 (3)
Red 21 (1)
Red 21 (1)
Red 21 (1)
SCL8 1-1.16LCB6LCBN6LCC6LCCN6
6 AWG1-1.16 Blue P24
(3)
CD-720-1 Blue P24
(2)
CD-920-6 Blue P24
(1)—
CD-2001-6 Blue P24
(2)
Blue 24 (3)
Blue 24 (1)
Blue 24 (1)
Blue 24 (1)
SCL6 1-1/8LCB4LCBN4LCC4LCCN4
2 AWGSOL,
4–3 AWGSTR
1-1.16 Gray P29 (3)
CD-720-1 Gray P29
(2)
CD-920-4 Gray P29
(1)
STD (1)
CD-2001-4 Gray P29
(2)
Gray 29 (3)
Gray 29 (1)
Gray 29 (1)
Gray 29 (1)
SCL4 1-1/8LCB2LCBN2LCC2LCCN2 2 AWG
1-3/16 BrownP33 (3)
CD-720-1 Brown P33
(2)
CD-920-2 Brown P33
(1)
STD (1)
CD-2001-2 Brown P33
(2)
Brown 33 (3)
Brown 33(1)
Brown 33 (1)
Brown 33 (1)
SCL2 1-1/4LCB1LCBN1LCC1LCCN1
1 AWG 1-3/8GreenP37 (4)
CD-720-2 Green P37
(2)
CD-920-1 Green P37
(1)
STD (1)
CD-2001-1 Green P37
(2)—
Green 37 (1)
Green 37 (1)
Green 37 (1)
SCL1LCB1/0LCBN1/0LCC1/0LCCN1/0
1/0 AWG1-7/16
—CD-720-2 Pink P42
(2)
CD-920-1/0Pink P42
(2)
STD(2)
CD-2001-1/0 Pink P42
(2)—
Pink 42 (2)
Pink 42(2)
Pink 42 (2)
SCL1/0 1-3/8LCB2/0LCBN2/0LCC2/0LCCN2/0
2/0 AWG 1-1/2 —CD-720-2 Black P45
(3)
CD-920-2/0Black P45
(3)
STD(2)
CD-2001-2/0 Black P45
(3)
— Black 45 (3)
Black 45 (3)
Black 45 (2)
SCL2/0LCB3/0LCBN3/0LCC3/0LCCN3/0
3/0 AWG 1-1/2 —CD-720-2
Orange P50 (3)
CD-920-3/0 Orange P50
(3)
STD(2)
CD-2001-3/0 Orange P50
(3)
— Orange 50 (3)
Orange 50 (3)
Orange 50 (2)
SCL3/0LCB4/0LCBN4/0LCC4/0LCCN4/0
4/0 AWG1-9/16
—CD-720-3
Purple P54 (3)
CD-920-4/0 Purple P54
(3)
STD(2)
CD-2001-4/0 Purple P54
(3)
— Purple 54 (3)
Purple 54 (3)
Purple 54 (2)
SCL4/0 1-5/8LCB250LCBN250LCC250LCCN250
250 kcmil 1-5/8 —CD-720-3 Yellow P62
(4)
CD-920-250 Yellow P62
(3)
STD (3)
CD-2001-250 Yellow P62
(3)
— Yellow 62 (4)
Yellow 62(4)
Yellow 62(2)
SCL250LCB300LCBN300LCC300LCCN300
300 kcmil 2 —CD-720-4 White P66
(4)
CD-920-300 White P66
(3)
STD (3)
CD-2001-300 White P66
(3)
— — White 66 (4)
White 66H* (4)
SCL300
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). L13
T E R M I N A T I O N S O L U T I O N S
Types LCB, LCBN, LCC, LCCN & SCL (continued)
For use withCopper
Conductors
Installation Tooling and Die Selections for:
* Half width dies.**CD-920 Dies can be used with CT-940CH and CT-2940
tools with CD-940-DA adapter.① Require U Die adapter.② CD-940 Dies to be used exclusively with C-940CH tool.③ Maximum size: 500 kcmil lugs and 250 kcmil splices.
④ The CT-1700 crimp die pockets are integrated into thetool head.
⑤ Maximum size: 250 kcmil lugs and splices.⑥ Minimum size: 4 AWG lugs and splices.
Thomas & Betts Burndy Anderson Penn-Union Greenlee
TBM15TBM15I
TBM15BSCR
TBM8-750M-1TBM8-750
TBM750BSCR⑥,TBM8-750BSCR
TBM14MTBM14BSCRBPLT14BSCR
13100A
Y2MRY1MR
Y1MRTC MY29
Y35, Y39, Y39BH,Y750, Y750-2,
Y750BH, Y750HS,Y750BH-2,
PAT750,BAT750, BAT35 Y45①, Y46①
Y644M,Y644HS,
Y644MBH,PAT644,BAT644 VC6 TDY-1 1989
Die Part Number / Color Code & Die Index Number / (Number of Crimps)
Red 21 (1)
STD (1)
Red 21 (1)
Red 49 (2)
#8 (1)
U8CRTRed 49
(1)
U8CRTRed 49
(1)— — — —
Blue 24 (1)
STD (1)
Blue 24 (1)
Blue 7 (2)
#6 (1)
U5CRT Blue 7
(1)
U5CRT Blue 7
(1)
STD (1)
STD (1)
— —
Gray 29 (1)
STD (1)
Gray 29 (1)
Gray 8 (2)
#4(1)
U4CRT Gray 8
(1)
U4CRT Gray 8
(1)
STD (1)
STD (1)
—STD (1)
Brown 33 (1)
STD (1)
Brown 33 (1)
Brown 10(2)
#2 (1)
U2CRT Brown 9 (solid)
/ Brown 10 (stranded)
(2)
U2CRT Brown 9 (solid)
/ Brown 10 (stranded)
(2)
STD (1)
STD (1)
STD (1)
STD (1)
Green 37 (1)
STD (1)
Green 37 (1)
—#1(1)
U1CRT Green 11
(2)
U1CRT Green 11
(2)
STD (1)
STD (1)
STD (1)
STD (1)
Pink 42H* (4)
STD (2)
Pink 42H* (4)
—1/0(2)
U25RT Pink 12
(2)
U25RT Pink 12
(2)
STD (1)
STD (1)
STD (1)
STD (1)
Black 45 (2)
STD (2)
Black 45 (2)
—2/0(2)
U26RT Black 13
(2)
U26RT Black 13
(2)
STD (1)
STD (1)
STD (1)
STD (1)
Orange 50 (2)
STD (2)
Orange 50 (2)
—3/0(2)
U27RT Orange 14
(2)
U27RT Orange 14
(2)
STD (1)
STD (2)
STD (1)
STD (1)
Purple 54H* (4)
STD (2)
Purple 54H* (4)
—4/0(2)
U28RT Purple 15
(2)
U28RT Purple 15
(2)
STD (1)
STD (2)
STD (1)
STD (1)
Yellow 62(2)
STD (2)
Yellow 62 (2)
—250(2)
U29RT Yellow 16
(2)
U29RT Yellow 16
(2)
STD (1)
STD (2)
STD (1)
STD (1)
White 66 (3)
STD (3)
White 66 (3)
— —U30 RT White 17
(3)
U30 RT White 17
(3)
STD (1)
STD(3)
STD (2)
STD (1)
Chart continues on Pages L14,L15 (350 kcmil to 1000 kcmil sizes)
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
L14
Index
T E R M I N A T I O N S O L U T I O N S
Types LCB, LCBN, LCC, LCCN & SCL (continued)
For use withCopper
Conductors
*Half width dies.**CD-920 Dies can be used with CT-940CH and CT-2940 tools with CD-940-DA adapter.① Require U Die adapter.② CD-940 Dies to be used exclusively with CT-940CH tool.③ Maximum size: 500 kcmil lugs and 250 kcmil splices.④ The CT-1700 crimp die pockets are integrated into the tool head.⑤ Maximum size: 250 kcmil lugs and splices.⑥ Minimum size: 4 AWG lugs and splices.
Installation Tooling and Die Selections for:
PANDUIT ® (See Crimping Tools Tab — Section G) Thomas & Betts
CT-1700④ CT-720
CT-920, CT-920CH,CT-930, CT-930CH,
CT-2920,CT-2930, CT-2931,
CT-930LPCH⑤,CT-940CH**,
CT-2940**
CT-980,CT-980CH,CT-2950③,CT-2980,CT-2981,
CT-980LPCH⑤
CT-2001,CT-2002
TBM20S,TBM25S TBM5 TBM8
TBM12,13642M
PANDUIT ®
PartNumber
Std.WireSize
WireStrip
Length(In.)
L = Lug
S = Splice Die Part Number / Color Code & Die Index Number / (Number Of Crimps)LCB350LCBN350LCC350LCCN350
350kcmil
2 —CD-720-5 Red P71
(4)
CD-920-350Red P71
(3)
STD(3)
CD-2001-350Red P71
(3)— —
Red 71(4)
Red 71H*(4)
SCL350LCB400LCBN400LCC400LCCN400
400kcmil
2—
CD-720-6Blue P76
(4)
CD-920-400Blue P76
(3)
STD(3)
CD-2001-400Blue P76
(4)— —
Blue 76(4)
Blue 76H*(4)
SCL400 2-1/8LCB500LCBN500LCC500LCCN500
500kcmil
2-1/4 —CD-720-7
Brown P87(4)
CD-920-500Brown P87
(3)
STD(3)
CD-2001-500Brown P87
(4)— —
Brown 87(4)
Brown 87H*(4)
SCL500LCB600LCBN600LCC600LCCN600
600kcmil
2-11/16 — —CD-920-600Green P94
(4)
STD(3)
— — — —Green 94H*
(4)
SCL600LCB750LCBN750LCC750LCCN750
750kcmil
2-15/16— —
CD-920-750 CD-940-750②
Black P106(4)
STD(3)
— — — —Black 106H*
(4)
SCL750 2-7/8LCB800LCBN800LCC800LCCN800
800kcmil
2-7/8 — —CD-940-800②
Orange P107(4)
— — — — — —
LCB1000LCBN1000LCC1000LCCN1000
1000kcmil
3-3/16— —
CD-940-1000②
White P125(4)
— — — — —Yellow 125H*
(4)
SCL1000 3
Chart continues fromsizes 8 AWG
thru 300 kcmilon Pages L12,L13
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). L15
T E R M I N A T I O N S O L U T I O N S
Types LCB, LCBN, LCC, LCCN & SCL (continued)
For use withCopper
Conductors
*Half width dies.**CD-920 Dies can be used with CT-940CH and CT-2940 tools with CD-940-DA adapter.① Require U Die adapter.② CD-940 Dies to be used exclusively with CT-940CH tool.③ Maximum size: 500 kcmil lugs and 250 kcmil splices.④ The CT-1700 crimp die pockets are integrated into the tool head.⑤ Maximum size: 250 kcmil lugs and splices.⑥ Minimum size: 4 AWG lugs and splices.
Installation Tooling and Die Selections for:
Thomas & Betts Burndy AndersonPenn-Union
Greenlee
TBM15TBM15I
TBM15BSCR
TBM8-750M-1TBM8-750
TBM750BSCR±TBM8-750BSCR
TBM14MTBM14BSCRBPLT14BSCR
13100A
Y2MRY1MR
Y1MRTC MY29
Y35, Y35BH, Y39,Y39BH, Y750,
Y750-2,Y750BH, Y750HS,
Y750BH-2,PAT750,
BAT750, BAT35 Y45①, Y46①
Y644M,Y644MBH,
PAT644,Y644HS,BAT644 VC6 TDY-1 1989
Die Part Number / Color Code & Die Index Number / (Number Of Crimps)
Red 71H* (4)
STD (3)
Red 71 (4)
— —U31RT (Red 18
(3)
U31RT Red 18
(3)
STD (1)
STD (3)
STD (2)
STD (1)
Blue 76H* (4)
STD (3)
Blue 76 (4)
— —U32RT Blue 19
(3)
U32RT Blue 19
(3)
STD (1)
STD (3)
STD (2)
STD (1)
Brown 87H* (4)
STD (3)
Brown 87 (4)
— —U34RT
Brown 20 (3)
U34RT Brown 20
(3)
STD (1)
STD (3)
STD (2)
STD (1)
Green 94H* (4)
STD (4)
Green 94 (4)
— —U36RT
Green 22(4)
U36RT Green 22
(4)
STD (1)
—STD (4)
—
Black 106H* (4)
STD (4)
Black 106 (4)
— —U39RT
Black 24 (5)
U39RT Black 24
(5)
STD (1)
—STD (2)
—
— — — — — — — — — — —
125H*(4)
—125H*
(4)— — —
S44RT White 27
(6)— — — —
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
L16
Index
T E R M I N A T I O N S O L U T I O N S
Types LCBH, LCCH and SCH
For use withCopper
Conductors
*Half width dies.**CD-920 Dies can be used with CT-940CH Tool with
CD-940-DA Die Adapter.‡Maximum Size: 500 kcmil lug, 250 kcmil splice.
▲CD-940 Dies to be used exclusively with CT-940CH Tool.① CT-1700 crimp die pockets are integrated into the tool head.② Maximum size: 250 kcmil lugs and splices.③ Minimum size: 4 AWG lugs and splices.
Installation Tooling and Die Selections for:
PANDUIT ® (See Crimping Tools Tab — Section G) Thomas & Betts
CT-1700① CT-720
CT-920,CT-920CH,
CT-2920, CT930,CT-930CH③,
CT-2930, CT2931,CT-930LPCH②,
CT-940CH** CT-2940**
CT-980,CT-980CH,CT-2950‡,CT-2980,CT-2981
CT980LPCH②
CT-2001,CT-2002 TBM5 TBM8
TBM1213642M
PANDUIT ®
Part NumberStd.WireSize
WireStrip
Length(In.)
L = Lug
S = Splice Die Part Number / Color Code & Die Index Number / (Number Of Crimps)LCBH6LCCH6 6
AWG1-1/8 Blue P24
(3)
CD-720-1 Blue P24
(2)
CD-920-6 Blue P24
(1)—-
CD-2001-6 Blue P24
(2)
Blue 24 (1)
Blue 24 (1)
Blue 24 (1)
SCH6 15/16
LCBH4 LCCH4 4
AWG1-1/8 Gray P29
(3)
CD-720-1 Gray P29
(2)
CD-920-4 Gray P29
(1)
STD (1)
CD-2001-4 Gray P29
(2)
Gray 29 (1)
Gray 29 (1)
Gray 29 (1)
SCH4 15/16
LCBH2 LCCH2 2
AWG1-1/4 Brown P33
(3)
CD-720-1 Brown P33
(2)
CD-920-2 Brown P33
(1)
STD (1)
CD-2001-2 Brown P33
(2)
Brown 33 (1)
Brown 33 (1)
Brown 33 (1)
SCH2 1-1/16
LCBH1 LCCH1 1
AWG1-7/16 Green P37
(3)
CD-720-2 Green P37
(2)
CD-920-1 Green P37
(1)
STD (1)
CD-2001-1 Green P37
(2)
Green 37 (1)
Green 37 (1)
Green 37 (1)
SCH1 1-1/16
LCBH1/0 LCCH1/0 1/0
AWG1-1/2
—CD-720-2 Pink P42
(2)
CD-920-1/0 Pink P42
(2)
STD (2)
CD-2001-1/0 Pink P42
(2)
Pink 42 (2)
Pink 42 (2)
Pink 42 (2)
SCH1/0 1-1/16
LCBH2/0 LCCH2/0 2/0
AWG1-9/16
—CD-720-2 Black P45
(3)
CD-920-2/0 Black P45
(3)
STD(2)
CD-2001-2/0 Black P45
(3)
Black 45 (3)
Black 45 (3)
Black 45 (2)
SCH2/0 1-1/8
LCBH3/0 LCCH3/0 3/0
AWG1-9/16
—CD-720-2
Orange P50(3)
CD-920-3/0 Orange P50
(3)
STD(2)
CD-2001-3/0 Orange P50
(3)
Orange 50 (3)
Orange 50 (3)
Orange 50 (2)
SCH3/0 1-1/4
LCBH4/0 LCCH4/0 4/0
AWG1-5/8
—CD-720-3
Purple P54 (3)
CD-920-4/0 Purple P54
(3)
STD(2)
CD-2001-4/0 Purple P54
(3)
Purple 54 (3)
Purple 54 (3)
Purple 54 (3)
SCH4/0 1-1/4
LCBH250 LCCH250 250
kcmil1-11/16
—CD-720-3 Yellow P62
(4)
CD-920-250 Yellow P62
(3)
STD(3)
CD-2001-250 Yellow P62
(3)
Yellow 62 (4)
Yellow 62 (4)
Yellow 62 (2)
SCH250 1-5/16
LCBH300 LCCH300 300
kcmil2-5/16
—CD-720-4 White P66
(4)
CD-920-300 White P66
(3)
STD(3)
CD-2001-300 White P66
(3)—
White 66 (4)
White 66H* (4)
SCH300 1-3/8
LCBH350 LCCH350 350
kcmil2-5/16
—CD-720-5 Red P71
(4)
CD-920-350 Red P71
(3)
STD(3)
CD-2001-350 Red P71
(3)—
Red 71 (4)
Red 71H* (4)
SCH350 1-7/16
LCBH400 LCCH400 400
kcmil2-3/8
—CD-720-6 Blue P76
(4)
CD-920-400 Blue P76
(3)
STD(3)
CD-2001-400 Blue P76
(4)—
Blue 76 (4)
Blue 76H* (4)
SCH400 1-9/16
LCBH500 LCCH500 500
kcmil2-9/16
—CD-720-7
Brown P87 (4)
CD-920-500 Brown P87
(3)
STD(3)
CD-2001-500 Brown P87
(4)—
Brown 87 (4)
Brown 87H* (4)
SCH500 1-13/16
LCBH600 LCCH600 600
kcmil2-3/4
— —CD-920-600 Green P94
(4)
STD(3)
— — —Green 94H*
(4)SCH600 1-15/16
LCBH750 LCCH750 750
kcmil2-15/16
— —
CD-920-750, CD-940-750▲
Black P106 (4)
STD(3)
— — —Black 106H*
(4)SCH750 2-3/16
LCBH1000 LCCH1000 1000
kcmil3-1/16
— —CD-940-1000▲
Green P125 (4)
— — — —125H*
(4)SCH1000 2-9/16
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). L17
Installation Tooling and Die Selections for:
Types LCBH, LCCH and SCH (continued)
*Half width dies.**CD-920 Dies can be used with CT-940CH Tool with CD-940-DA Die Adapter.‡Maximum Size: 500 kcmil lug, 250 kcmil splice.▲CD-940 Dies to be used exclusively with CT-940CH Tool.
① CT-1700 crimp die pockets are integrated into the tool head.② Maximum size: 250 kcmil lugs and splices.③ Minimum size: 4 AWG lugs and splices.
For use withCopper
Conductors
Thomas & Betts Burndy AndersonPenn-Union
Greenlee
TBM15,TBM15I,
TBM15BSCR
TBM8-750M-1,TBM8-750,
TBM8-750BSCR TBM750BSCR③
TBM14M,TBM14BSCR,BPLT14BSCR,
13100A MY29
Y39, Y35, Y35BH,BAT35, Y750,
Y750BH-2,Y750HS,
Y750-2, BAT750,PAT750, Y39BH,
Y750BH Y45, Y46
Y644,Y644HS,PAT644,BAT644,
Y644MBH VC6 TDY-1 1989
Die Part Number / Color Code & Die Index Number / (Number Of Crimps)
Blue 24 (1)
STD(1)
Blue 24 (1)
6 (1)
U5CRT Blue 7
(1)
U5CRT Blue 7
(1)
STD(1)
STD(1)
— —
Gray 29 (1)
STD(1)
Gray 29 (1)
4 (1)
U4CRT Gray 8
(1)
U4CRT Gray 8
(1)
STD(1)
STD(1)
—-STD(1)
Brown 33 (1)
STD(1)
Brown 33 (1)
2 (1)
U2CRT Brown 10
(2)
U2CRT Brown 10
(2)
STD(1)
STD(1)
STD(1)
STD(1)
Green 37 (1)
STD(1)
Green 37 (1)
1 (1)
U1CRT Green 11
(2)
U1CRT Green 11
(2)
STD(1)
STD(1)
STD(1)
STD(1)
Pink 42H* (4)
STD(2)
Pink 42H* (4)
1/0 (2)
U25RT Pink 12
(2)
U25RT Pink 12
(2)
STD(1)
STD(1)
STD(1)
STD(1)
Black 45 (2)
STD(2)
Black 45 (2)
2/0 (2)
U26RT Black 13
(2)
U26RT Black 13
(2)
STD(1)
STD(1)
STD(1)
STD(1)
Orange 50 (2)
STD(2)
Orange 50 (2)
3/0 (2)
U27RT Orange 14
(2)
U27RT Orange 14
(2)
STD(1)
STD(2)
STD(1)
STD(1)
Purple 54H* (4)
STD(2)
Purple 54H* (4)
4/0 (2)
U28RT Purple 15
(2)
U28RT Purple 15
(2)
STD(1)
STD(2)
STD(1)
STD(1)
Yellow 62 (2)
STD(2)
Yellow 62 (2)
250 (2)
U29RT Yellow 16
(2)
U29RT Yellow 16
(2)
STD(1)
STD(2)
STD(2)
STD(1)
White 66H* (4)
STD(3)
White 66 (4)
—U30RT
White 17 (3)
U30RT White 17
(3)
STD(1)
STD(3)
STD(2)
STD(1)
Red 71H* (4)
STD(3)
Red 71H* (4)
—U31RT Red 18
(3)
U31RT Red 18
(3)
STD(1)
STD(3)
STD(2)
STD(1)
Blue 76H* (4)
STD(3)
Blue 76 (4)
—U32RT Blue 19
(3)
U32RT Blue 19
(3)
STD(1)
STD(3)
STD(2)
STD(1)
Brown 87H* (4)
STD(3)
Brown 87H* (4)
—U34RT
Brown 20 (3)
U34RT Brown 20
(3)
STD(1)
STD(3)
STD(2)
STD(1)
Green 94H* (4)
STD(4)
Green 94H* (4)
—U36RT
Green 22 (4)
U36RT Green 22
(4)
STD(1)
—STD(2)
—
Black 106H* (4)
STD(4)
Black 106H* (4)
—U39RT Black24
(5)
U39RT Black24
(5)
STD(1)
—STD(2)
—
125H* (4)
—125H*
(4)— —
S44RT White 27
(6)— — — —
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
L18
Index
Installation Tooling and Die Selections for:
*Half width dies.**CD-920 Dies can be used with CT-940CH Tool with CD-940-DA Die Adapter.‡Maximum Size: 250 kcmil.① The CT-1700 crimp die pockets are integrated into the tool head.
Type SCT
For use withCopper
Conductors
PANDUIT ® (See Crimping Tools Tab — Section G) Thomas & Betts
CT-1700① CT-720
CT-920,CT-920CH,
CT-2920, CT930,CT-930CH,
CT-2930, CT2931,CT-940CH** CT-2940**
CT-980,CT-980CH,CT-2950‡,CT-2980,CT-2981
CT-2001,CT-2002 TBM5 TBM8
PANDUIT ®
Part Number
Std.WireSize
WireStrip
Length(In.)
MainTap
MainTap Die Part Number / Color Code & Die Index Number / (Number of Crimps)
SCT2-22 AWG 2 Brown P33
(3)
CD-720-1 Brown P33
(2)
CD-920-2 Brown P33
(1)
STD(1)
CD-2001-2 Brown P33
(2)
Brown (1)
Brown (1)2 AWG 1-9/16
SCT1/0-1/01/0 AWG 2-1/16 Pink P42
(3)
CD-720-2 Pink P42
(2)
CD-920-1/0 Pink P42
(2)
STD(1)
CD-2001-1/0 Pink P42
(2)
Pink (2)
Pink (2)1/0 AWG 1-9/16
SCT2/0-2/02/0 AWG 2-1/16
—-CD-720-2 Black P45
(3)
CD-920-2/0 Black P45
(3)
STD(1)
CD-2001-2/0 Black P45
(3)
Black (3)
Black (3)2/0 AWG 1-9/16
SCT4/0-1/0
4/0 AWG 2-1/16
—
CD-720-2 Orange P50
(3)
CD-920-3/0 Orange P50
(3) STD(1)
CD-2001-3/0 Orange P50
(3)
Orange (3)
Orange (3)
1/0 AWG 1-9/16CD-720-2 Pink P42
(3)
CD-920-1/0 Pink P42
(3)
CD-2001-1/0 Pink P42
(3)
Pink (3)
Pink (3)
SCT4/0-4/04/0 AWG 2-1/8
—CD-720-3
Purple P54(3)
CD-920-4/0 Purple P54
(3)
STD(1)
CD-2001-4/0 Purple P54
(3)
Purple (3)
Purple (3)4/0 AWG 1-11/16
SCT250-250250 kcmil 2-3/16
—CD-720-3 Yellow P62
(4)
CD-920-250 Yellow P62
(3)
STD(1)
CD-2001-250 Yellow P62
(3)
Yellow(4)
Yellow(4)250 kcmil 1-11/16
SCT300-300300 kcmil 2-13/16
—CD-720-4 White P65
(4)
CD-920-300 White P65
(3)
STD(1)
CD-2001-300 White P66
(3)—
White (4)300 kcmil 2-1/16
SCT350-350350 kcmil 2-13/16
—CD-720-5 Red P71
(4)
CD-920-350 Red P71
(3)
STD(1)
CD-2001-350 Red P71
(3)—
Red (4)350 kcmil 2-1/16
SCT500-4/0
500 kcmil 2-15/16
—
CD-720-7 Brown P87
(4)
CD-920-500 Brown P87
(3) STD(1)
CD-2001-500 Brown P87
(4)—
Brown (4)
4/0 AWG 2-15/16CD-720-3
Purple P54 (4)
CD-920-4/0 Purple P54
(4)
CD-2001-4/0 Purple P54
(4)—
Purple (4)
SCT500-500500 kcmil 3-1/8
—CD-720-7
Brown P87 (4)
CD-920-500 Brown P87
(3)
STD(1)
CD-2001-500 Brown P87
(4)—
Brown(4)500 kcmil 2-9/16
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). L19
Installation Tooling and Die Selections for:
*Half width dies.**CD-920 Dies can be used with CT-940CH Tool with CD-940-DA Die Adapter.‡Maximum Size: 250 kcmil.① The CT-1700 crimp die pockets are integrated into the tool head
Type SCT (continued)
For use withCopper
Conductors
Thomas & Betts Burndy AndersonPenn-Union
Greenlee
TBM12,13642M
TBM15,TBM15I,
TBM15BSCR
TBM8-750M-1,TBM8-750,
TBM8-750BSCR
TBM14M,TBM14BSCR,BPLT14BSCR,
13100A MY29
Y39, Y35, Y35BH,Y750HS, Y750,
BAT35, Y45,Y39BH, Y46,
Y750-2,BAT750,PAT750,
Y750BH-2,Y750BH
Y644,Y644HS,PAT644,BAT644,
Y644MBH VC6 TDY-1 1989
Die Part Number / Color Code & Die Index Number / (Number of Crimps)
Brown 33 (1)
Brown 33 (1)
STD(1)
Brown 33 (1)
2 (1)
U2CRTBrown 10
(2)
STD(1)
STD(1)
STD(1)
STD(1)
Pink 42H* (2)
Pink 42H* (4)
STD(2)
Pink 42H* (4)
1/0 (2)
U25RTPink 12
(2)
STD(1)
STD(1)
STD(1)
STD(1)
Black 45 (2)
Black 45 (2)
STD(2)
Black 45 (2)
2/0 (2)
U26RTBlack 13
(2)
STD(1)
STD(1)
STD(1)
STD(1)
Orange 50 (2)
Orange 50(2)
STD(2)
Orange 50 (2)
3/0 (2)
U27RTOrange 14
(2) STD(1)
STD(2)
STD(1)
STD(1)
Pink 42 (2)
Pink 42H* (4)
Pink 42H* (4)
1/0 (2)
U25RTPink 12
(2)
Purple 54 (2)
Purple 54H*(4)
STD(2)
Purple 54H* (4)
4/0 (2)
U28RTPurple 15
(2)
STD(1)
STD(2)
STD(1)
STD(1)
Yellow 62(2)
Yellow 62 (2)
STD(2)
Yellow 62 (2)
250 (2)
U29RTYellow 16
(2)
STD(1)
STD(2)
STD(1)
STD(1)
White 66H* (4)
White 66H* (4)
STD(3)
White 66H* (4)
—U30RT
White 17 (3)
STD(1)
STD(3)
STD(2)
STD(1)
Red 71H*(4)
Red 71H* (4)
STD(3)
Red 71 (3)
—U31RTRed 18
(3)
STD(1)
STD(3)
STD(2)
STD(1)
Brown 87H* (4)
Brown 87H*(4)
STD(3)
Brown 87 (3)
—U34RT
Brown 20 (3) STD
(1)STD(3)
STD(2)
STD(1)
Olive 54 (4)
Olive 54H* (4)
Olive 54H* (3)
—U28RT
Purple 15(3)
Brown 87H* (4)
Brown 87H* (4)
STD(3)
Brown 87H* (4)
—U34RT
Brown 20(3)
STD(1)
STD(3)
STD(2)
STD(1)
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
L20
Index
Installation Tooling and Die Selections for:
Type PS
*Half width dies.**CD-920 Dies can be used with CT-940CH Tool with CD-940-DA Die Adapter.
For use withCopper
Conductors
PANDUIT ® (See Crimping Tools Tab — Section G) Thomas & Betts
Min. Max. Die Part Number / Color Code & Die Index Number / (Number of Crimps)
PS8 19,000 25,000CD-720-1Red P21
(1)
CD-920-8Red P21
(1)—
CD-2001-8Red P21
(1)
Red(1)
Red 21(1)
PS6 25,000 40,000CD-720-1Blue P24
(1)
CD-920-6Blue P24
(1)
Std(1)
CD-2001-6Blue P24
(1)
Blue(1)
Blue 24(1)
PS4 40,000 65,000CD-720-1Gray P29
(1)
CD-920-4Gray P29
(1)
Std(1)
CD-2001-4Gray P29
(1)
Gray(1)
Gray 29(1)
PS2 65,000 100,000CD-720-1
Brown P33(1)
CD-920-2Brown P33
(1)
Std(1)
CD-2001-2Brown P33
(1)
Brown(1)f
Brown 33(1)
PS1 100,00 130,000CD-720-2Green P37
(1)
CD-920-1Green P37
(1)
Std(1)
CD-2001-1Green P37
(1)
Green(1)
Green 37(1)
PS1/0 130,000 160,000CD-720-2Pink P42
(2)
CD-920-1/0Pink P42
(1)
Std(1)
CD-2001-1/0Pink P42
(2)
Pink(2)
Pink 42(1)
PS2/0 160,000 200,00CD-720-2Black P45
(2)
CD-920-2/0Black P45
(1)
Std(1)
CD-2001-2/0Black P45
(2)
Black(2)
Black 45(1)
PS3/0 200,000 240,000CD-720-2
Orange P50(2)
CD-920-3/0Orange P50
(1)
Std(1)
CD-2001-3/0Orange P50
(2)
Orange(2)
Orange 50(1)
PS4/0 240,000 280,000CD-720-3
Purple P54(2)
CD-920-4/0Purple P54
(1)
Std(1)
CD-2001-4/0Purple P54
(2)
Purple(2)
Purple 54(1)
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). L21
Installation Tooling and Die Selections for:
Type PS (continued)
For use withCopper
Conductors
Thomas & Betts Burndy Anderson Penn-Union Greenlee
TBM15,TBM15I,
TBM15BSCRTBM20S,TBM25S
TBM8-750M-1,TBM8-750,
TBM8-750BSCR
TBM14M,TBM14BSCR,BPLT14BSCR,
13100A MY29
Y35, Y35BH, Y39,Y39BH, Y45, Y46,
Y750, Y750-2,Y750BH, YY750BH-2,
Y750HS, PAT750,BAT35, BAT750
Y644M,Y644MBH,Y644HS,PAT644,BAT644,
Y644 VC6 TDY-1 1989
Die Part Number / Color Code & Die Index Number / (Number Of Crimps)
Red 21 (1)
Red 21(1)
Std.(1)
Red 21 (1)
#8 (1)
U8CRTRed 49
(1)— — — —
Blue 24(1)
Blue 24(1)
Std.(1)
Blue 24(1)
#6(1)
U5CRT Blue 7
(1)
Std.(1)
Std.(1)
— —
Gray 29 (1)
Gray 29(1)
Std.(1)
Gray 29 (1)
#4 (1)
U4CRT Gray 8
(1)
Std.(1)
Std.(1)
—Std.(1)
Brown 33 (1)
Brown 33(1)
Std.(1)
Brown 33 (1)
#2 (1)
U2CRT Brown 10
(1)
Std.(1)
Std.(1)
Std.(1)
Std.(1)
Green 37 (1)
—Std.(1)
Green 37 (1)
#1 (1)
U1CRT Green 11
(1)
Std.(1)
Std.(1)
Std.(1)
Std.(1)
Pink 42H* (2)
—Std.(1)
Pink 42H* (2)
1/0 (1)
U25RT Pink 12
(1)
Std.(1)
Std.(1)
Std.(1)
Std.(1)
Black 45 (1)
—Std.(1)
Black 45 (1)
2/0 (1)
U26RT Black 13
(1)
Std.(1)
Std.(1)
Std.(1)
Std.(1)
Orange 50 (1)
—Std.(1)
Orange 50
3/0 (1)
U257RT Orange 14
(1)
Std.(1)
Std.(1)
Std.(1)
Std.(1)
Purple 54H* (2)
—Std.(1)
Purple 54H* (2)
4/0 (1)
U28RT Purple 15
(1)
Std.(1)
Std.(1)
Std.(1)
Std.(1)
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
L22
Index
Installation Tooling and Die Selections for:
Types LCAX, LCAXN, LCBX, LCDX, LCDXN,LCCX, LCEX and LCJX
*CD-920 Dies can be used with CT-940CH and CT2940 tools with CD-940-DA Die Adapter.**CD-940 dies to be used with CT-940CH and CT-2940 tools.***CT-1700 crimp die pockets are integrated into the tool frame.
For use withCopper
Conductors
PANDUIT ® (See Crimping Tools Tab — Section G)
CT-1700*** CT-2001, CT-2002
CT-920, CT-920CH,CT-2920, CT-930,
CT-930CH,CT-2930, CT-2931,
CT-2940*, CT-940CH*
PANDUIT ®
Part Number Std. Wire Size Cable Classes
WireStrip
Length.(In.)
Die Part Number / Color Code & Die Index Number (Number Of Crimps)
LCAX8, LCDX8,LCDXN8,LCEX8, LCJX8
8 AWGCompact, B, G, H, I, K, M,
Locomotive (DLO)
1/2Red P21
( 2 )
CD-2001-8 Red P21
(1) CD-920-8 Red P21
(1)LCBX8, LCCX8 3/4
Red P21 ( 3 )
CD-2001-8 Red P21
(2)
LCAX6, LCDX6,LCDXN6,LCEX6, LCJX6
6 AWGCompact, B, G, H, I, K, M,
Locomotive (DLO)
9/16Blue P24
( 2 )
CD-2001-6 Blue P24
(1) CD-920-6 Blue P24
(1)LCBX6, LCCX6 1-1/8
Blue P24 ( 3 )
CD-2001-6 Blue P24
(2)
LCAX4, LCDX4,LCDXN4,LCEX4, LCJX4
4 AWG Compact, B, G, H, I, K, M5/8
Gray P29 ( 2 )
CD-2001-4 Gray P29
(1) CD-920-4 Gray P29
(1)
5, 4, 3 AWG Locomotive (DLO)
LCBX4, LCCX44 AWG Compact, B, G, H, I, K, M
1-1/8Gray P29
( 3 )
CD-2001-4 Gray P29
(2)5, 4, 3 AWG Locomotive (DLO)
LCAX2, LCDX2,LCDXN2,LCEX2, LCJX2
2 AWGCompact, B, G, H, I, K, M,
Locomotive (DLO)
11/16Brown P33
( 2 )
CD-2001-2 Brown P33
(1) CD-920-2 Brown P33
(1)LCBX2, LCCX2 1-7/16
Brown P33 ( 3 )
CD-2001-2 Brown P33
(2)
LCAX1, LCDX1,LCDXN1,LCEX1, LCJX1
1 AWGCompact, B, G, H, I, K, M,
Locomotive (DLO)
3/4
—
CD-2001-1 Green P37
(1)
CD-920-1 Green P37
(1)
LCBX1, LCCX1 1-1/2CD-2001-1 Green P37
(2)
CD-920-1 Green P37
(2)
LCAX1/0, LCDX1/0,LCDXN1/0,LCEX1/0, LCJX1/0
1/0 AWGCompact, B, G, H, I, K, M,
Locomotive (DLO)
3/4
—
CD-2001-1/0 Pink P42
(2)
CD-920-1/0 Pink P42
(1)
LCBX1/0, LCCX1/0 1-9/16CD-2001-1/0
Pink P42(3)
CD-920-1/0 Pink P42
(3)
LCAX2/0, LCDX2/0,LCDXN2/0,LCEX2/0, LCJX2/0
2/0 AWGCompact, B, G, H, I, K, M,
Locomotive (DLO)
7/8
—
CD-2001-2/0 Black P45
(2)
CD-920-2/0 Black P45
(1)
LCBX2/0, LCCX2/0 1-9/16CD-2001-2/0
Black P45(3)
CD-920-2/0 Black P45
(3)
LCAX3/0, LCDX3/0,LCDXN3/0,LCEX3/0, LCJX3/0
3/0 AWGCompact, B, G, H, I, K, M,
Locomotive (DLO)
1
—
CD-2001-3/0 Orange P50
(2)
CD-920-3/0 Orange P50
(1)
LCBX3/0, LCCX3/0 1-5/8CD-2001-3/0 Orange P50
(3)
CD-920-3/0 Orange P50
(3)
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). L23
Installation Tooling and Die Selections for:
*CD-920 Dies can be used with CT-940CH and CT2940 tools with CD-940-DA Die Adapter.**CD-940 dies to be used with CT-940CH and CT-2940 tools.***CT-1700 crimp die pockets are integrated into the tool frame.
Types LCAX, LCAXN, LCBX, LCDX, LCDXN,LCCX, LCEX and LCJX (continued)
For use withCopper
Conductors
PANDUIT® Tool Part Number
CT-1700*** CT-2001, CT-2002
CT-920, CT-920CH,CT-2920, CT-930,
CT-930CH,CT-2930, CT-2931,
CT-2940*, CT-940CH*
PANDUIT®Part Number Std. Wire Size Cable Classes
WireStrip
Length.(In.)
Die Part Number / Color Code & Die Index Number / (Number Of Crimps)
*CD-940 dies to be used exclusively with CT-940CH and CT-2940 tools.**Can only be crimped with CT-940CH and CT-2940 tools.***CD-920 dies can be used with the CT-940CH and CT-2940 tools with CD-940-DA die adapter.****CT-1700 crimp die pockets are integrated into the tool frame.
Die Part Number / Color Code & Die Index Number / (Number Of Crimps)
for LCAF, SCSF Parts for LCCF Parts for LCAF, SCSF Parts for LCCF Parts
LCAF8LCCF8 8 AWG Locomotive (DLO)
13/16 Red P21(2)
Red P21(3)
CD-920-8 Red P21
(1)SCSF8 11/16
LCAF6
6 AWGK, M,
Locomotive (DLO)
7/8Blue P24
(2)Blue P24
(3)
CD-920-6 Blue P24
(1)
CD-920-6 Blue P24
(2)LCCF6 1-5/16
SCSF6 13/16
LCAF4
4 AWGK, M,
Locomotive (DLO)
7/8Gray P29
(2)Gray P29
(3)
CD-920-4 Gray P29
(1)
CD-920-4 Gray P29
(2)LCCF4 1-5/16
SCSF4 13/16
LCAF2
2 AWGK, M,
Locomotive (DLO)
15/16Brown P33
(2)Brown P33
(3)
CD-920-2 Brown P33
(1)
CD-920-2 Brown P33
(2)LCCF2 1-7/16
SCSF2 7/8
LCAF1
1 AWGK, M,
Locomotive (DLO)
1
— —CD-920-1/0
Pink P42 (1)
CD-920-1/0 Pink P42
(2)LCCF1 1-1/2
SCSF1 7/8
LCAF1/0
1/0 AWGK, M,
Locomotive (DLO)
1-7/16
— —CD-920-2/0 Black P45
(2)LCCF1/0 1-9/16
SCSF1/0 1-3/16
LCAF2/0
2/0 AWGK, M,
Locomotive (DLO)
1-7/16
— —CD-920-3/0 Orange P50
(2)LCCF2/0 1-9/16
SCSF2/0 1-3/16
LCAF3/0
3/0 AWGK, M,
Locomotive (DLO)
1-7/16
— —CD-920-4/0 Purple P54
(2)LCCF3/0 1-5/8
SCSF3/0 1-3/16
LCAF4/0
4/0 AWGK, M,
Locomotive (DLO)
1-7/16
— —CD-920-250 Yellow P62
(2)LCCF4/0 1-11/16
SCSF4/0 1-3/16
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). L25
Installation Tooling and Die Selections for:
Types LCAF, LCCF and SCSF (continued)
*CD-940 dies to be used exclusively with CT-940CH and CT-2940 tools.**Can only be crimped with CT-940CH and CT-2940 tools.***CD-920 dies can be used with the CT-940CH and CT-2940 tools with CD-940-DA die adapter.****CT-1700 crimp die pockets are integrated into the tool frame.
Die Part Number / Color Code & Die Index Number / (Number Of Crimps)
for LCAF, SCSF Parts for LCCF Parts for LCAF, SCSF Parts for LCCF Parts
LCAF250250 kcmil
K, M, Locomotive (DLO)
1-3/4
— —CD-920-300 White P66
(2)
CD-920-300 White P66
(3)
262.6 kcmil
LCCF250250 kcmil
2-5/16262.6 kcmil
SCSF250250 kcmil
1-3/16262.6 kcmil
LCAF300300 kcmil
K, M, Locomotive (DLO)
1-3/4
— —CD-920-350
Red P71(2)
CD-920-350 Red P71
(3)
313.1 kcmil
LCCF300300 kcmil
2-3/8313.1 kcmil
SCSF300300 kcmil
1-1/4313.1 kcmil
LCAF350350 kcmil
K, M, Locomotive (DLO)
1-5/16
— —CD-920-400
Blue P76 (2)
CD-920-400 Blue P76
(3)
373.7 kcmil
LCCF350350 kcmil
2-9/16373.7 kcmil
SCSF350350 kcmil
1-1/2373.7 kcmil
LCAF400400 kcmil
K, M, Locomotive (DLO)
2-1/4
— —CD-920-500 Brown P87
(2)
CD-920-500 Brown P87
(3)
444.4 kcmil
LCCF400400 kcmil
2-3/4444.4 kcmil
SCSF400400 kcmil
1-11/16444.4 kcmil
LCAF500500 kcmil
K, M, Locomotive (DLO)
2-5/16
— —CD-920-500A
Pink P99 (2)
CD-920-500A Pink P99
(3)
535.3 kcmil
LCCF500500 kcmil
2-15/16535.3 kcmil
SCSF500500 kcmil
1-5/8535.3 kcmil
LCAF600**646.4 kcmil Locomotive (DLO)
2-3/8— —
CD-920-750 Black P106
(2)
CD-920-750 Black P106
(3)LCCF600** 3
SCSF600** 1-5/8
LCAF750**777.7 kcmil Locomotive (DLO)
2-7/16— —
CD-940-800* Orange P107
(2)
CD-940-800* Orange P107
(4)LCCF750** 3-1/16
SCSF750** 1-5/8
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
L26
Index
Installation Tooling and Die Selections for:
Type RSC In-Line Reducing Splice
*CT-1700 crimp die pockets are integrated into the tool head.**CD-920 Dies can be used with CT-940CH Tool and CT-2940 Tool with CD-940-DA Die Adapter.^CD-940 Dies to be used with CT-940CH and CT-2940 Tool.‡Maximum conductor size: 500 flex I and 750 kcmil.‡‡Maximum conductor size: 250 flex I and 400 kcmil.
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). L37
Installation Tooling and Die Selections for:For use withCopper orAluminumConductors
Type HTAP
*Built into the CT-2001 Crimp Tool.**CD-940 dies to be used exclusively with CT-940CH or CT-2940 Crimp Tools.***CD-920 and CD-930 dies can be used with CT-940CH or CT-2940 Crimp Tools with CD-940-DA die adapter.
PANDUIT ® (See Crimping Tools Tab — Section G)
CT-2001CT-2002
CT-920, CT-920CH,CT-930, CT-930CH,
CT2920, CT2930, CT2931,CT-2940***, CT-940CH***
PANDUIT ®
Part Number
Conductor Sizes
Run TapDie Part Number / Color Code & Die Index Number
/ (Number of Crimps)
HTAP2-8 2-6 AWG str.1-6 AWG sol.
8-14 AWG str.7-14 AWG sol.
CD-2001-3/0Orange P50
(2)
CD-920-3/0(1)
HTAP1-1 1-6 AWG str.2-6AWG sol.
1-6 AWG str.2-6 AWG sol.
CD-2001-0Green P0
(4)
CD-920-0(1)
HTAP1/0-1 1/0-6 AWG str.2-6 AWG sol.
1-6 AWG str.2-6 AWG sol.
CD-2001-0Green P0
(4)
CD-920-0(1)
HTAP2/0-1 2/0-2 AWG str.2 AWG sol.
1-6 AWG str.2-6 AWG sol.
CD-2001-0Green P0
(4)
CD-920-0(1)
HTAP3/0-1 3/0-1/0 AWG str.4/0-3/0 AWG sol.
1-6 AWG str.2-6 AWG sol.
CD-2001-D3*(4)
CD-920-D3(1)
HTAP3/0-3/0 3/0-1/0 AWG str.4/0-3/0 AWG sol.
3/0-1/0 AWG str.4/0-3/0 AWG sol.
CD-2001-D3*(5)
CD-920-D3(1)
HTAP4/0-2 4/0-3/0 AWG str. 1-6 AWG str.2-6 AWG sol.
CD-2001-D3*(4)
CD-920-D3(1)
HTAP4/0-3/0 4/0-3/0 AWG str. 3/0-1 AWG str. CD-2001-D3*(6)
CD-920-D3(1)
HTAP4/0-4/0 4/0-3/0 AWG str. 4/0-3/0 AWG str. CD-2001-D3*(7)
CD-920-D3(2)
HTAP500-4/0 500 kcmil str. -4/0 AWG str. 4/0-1/0 AWG str. —
CD-930-NCD-940-N**
(3)
HTAP500-500 500 kcmil str. -4/0 AWG str.
500 kcmil str. -4/0-1/0 AWG str. —
CD-930-NCD-940-N**
(2)
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
L38
Index
Installation Tooling and Die Selections for:
*Half width dies.**CD-920 Dies can be used with CT940CH Tool with CD-940-DA Die Adapter. Maximum size
splice is 250 kcmil with CT-920, CT-920CH and CT-2920 Tools.‡CD-940 Dies to be used exclusively with CT-940CH Tool.
Die Part Number / Color Code & Die Index Number / (Number Of Crimps)
BPC6 6 AWG 1-1/16CD-720-2Tan P50
(2)
CD-2001-3/0Tan P50
(2)STD (1)
CD-920-3/0Tan P50
(2)
BPC4 4 AWG 1-1/16CD-720-2Tan P50
(2)
CD-2001-3/0Tan P50
(2)STD(1)
CD-920-3/0Tan P50
(2)
BPC2 2 AWG 1-1/16CD-720-2Tan P50
(2)
CD-2001-3/0Tan P50
(2)STD(1)
CD-920-3/0Tan P50
(2)
BPC1 1 AWG 1-1/16CD-720-2Tan P50
(2)
CD-2001-3/0Tan P50
(2)STD(1)
CD-920-3/0Tan P50
(2)
BPC1/0 1/0 AWG 1-5/16CD-720-5Red P71
(2)
CD-2001-350Red P71
(3)STD(2)
CD-920-350Red P71
(2)
BPC2/0 2/0 AWG 1-5/16CD-720-5Red P71
(2)
CD-2001-350Red P71
(3)STD(2)
CD-920-350Red P71
(2)
BPC3/0 3/0 AWG 1-5/16CD-720-5Red P71
(2)
CD-2001-350Red P71
(3)STD(2)
CD-920-350Red P71
(2)
BPC4/0 4/0 AWG 1-5/16CD-720-5Red P71
(2)
CD-2001-350Red P71
(3)STD(2)
CD-920-350Red P71
(2)
BPC250 250 kcmil 1-7/16 — — STD(2)
CD-920-800Green P94
(2)
BPC300 300 kcmil 1-7/16 — — STD(2)
CD-920-800Green P94
(2)
BPC350 350 kcmil 1-7/16 — — STD(2)
CD-920-800Green P94
(2)
BPC400 400 kcmil 1-7/16 — — STD(2)
CD-920-750,CD-940-750‡Black P106
(2)
BPC500 500 kcmil 1-7/16 — — STD(2)
CD-920-750,CD-940-750‡Black P106
(2)
BPC600 600 kcmil 1-15/16 — — —CD-940-750A‡
Red P125(2)
BPC750 750 kcmil 1-15/16 — — —CD-940-750A‡
Red P125(2)
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
Index
T E R M I N A T I O N S O L U T I O N S
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover). L39
Installation Tooling and Die Selections for:
Type BPC (continued)
For use withCopper orAluminumConductors
Thomas & Betts Burndy
13642M TBM8TBM15, TBM15I,
TBM15BSCR
Y35, BAT35, Y750,Y750-HS, Y750BH,Y750-2, PAT750,
Y750BH-2, BAT750Y39, Y45, Y46,
Y39BH
Y644M, Y644-HS,PAT644, BAT644,
Y644MBH
Die Part Number / Color Code & Die Index Number / (Number Of Crimps)
Orange 50(2)
Tan 50(2)
Orange 50(2)
U25ARTTan 296
(2)
U25ARTTan 296
(2)
STD(1)
Orange 50(2)
Tan 50(2)
Orange 50(2)
U25ARTTan 296
(2)
U25ARTTan 296
(2)
STD(1)
Orange 50(2)
Tan 50(2)
Orange 50(2)
U25ARTTan 296
(2)
U25ARTTan 296
(2)
STD(1)
Orange 50(2)
Tan 50(2)
Orange 50(2)
U25ARTTan 296
(2)
U25ART Tan 296
(2)
STD(1)
Blue 76H*(2)
Blue 76(2)
Blue 76(2)
U28ARTWhite 298
(2)
U28ARTWhite 298
(2)
STD(1)
Blue 76H*(2)
Blue 76(2)
Blue 76(2)
U28ARTWhite 298
(2)
U28ARTWhite 298
(2)
STD(1)
Blue 76H*(2)
Blue 76(2)
Blue 76 (2)
U28ARTWhite 298
(2)
U28ARTWhite 298
(2)
STD(1)
Blue 76H*(2)
Blue 76(2)
Blue 76(2)
U28ARTWhite 298
(2)
U28ARTWhite 298
(2)
STD(1)
Pink 99H* (2)
Brown 87 (3)
Brown 87H*(2)
U31ARTBrown 299
(2)
U31ARTBrown 299
(2)
STD(1)
Pink 99H*(2)
Brown 87(3)
Brown 87H*(2)
U31ARTBrown 299
(2)
U31ARTBrown 299
(2)
STD(1)
Pink 99H*(2)
Brown 87(3)
Brown 87H*(2)
U31ARTBrown 299
(2)
U31ARTBrown 299
(2)
STD(1)
Black 106H*(3) — Black 106H*
(3)
U34ARTPink 300
(3)
U34ARTPink 300
(3)
STD(1)
Black 106H*(3) — Black 106H*
(3)
U34ARTPink 300
(3)
U34ARTPink 300
(3)
STD(1)
Yellow 115H*(3) — Yellow 115H*
(3) —U39ART-2Yellow 936
(3)—
Yellow 115H*(3) — Yellow 115H*
(3) —U39ART-2Yellow 936
(3)—
SystemOverview
Terminals
Disconnects
Splices
Ferrules
CompressionConnectors
CrimpingTools
MechanicalConnectors
GroundingConnectors
SupportProducts
TechnicalInfo
T E R M I N A T I O N S O L U T I O N S
L40
Index
Installation Tooling and Die Selections for:
Types LAA, LAB and SA
*Half width dies.**CD-920 Dies can be used with CT-940CH Tool with CD-940-DA Die Adapter. Maximum size splice is 250 kcmil
with CT-920, CT-920CH and CT-2920 Tools.***CT-1700 Crimp Pockets are integrated into the tool head.‡CT-940 Dies to be used exclusively with CT-940CH Tool.
Common Conductor Sizes and StrandingsReference Chart
This chart details the different conductors commonly used in the industry.For each size, either AWG or Metric, various stranding options are listed.Typically the higher stranding is used in applications requiring greaterconductor flexibility.
Common Conductor Sizes and StrandingsReference Chart (continued)
This chart details the different conductors commonly used in the industry.For each size, either AWG or Metric, various stranding options are listed.Typically the higher stranding is used in applications requiring greaterconductor flexibility.