TELMA WIRE INDUSTRY · TELMA WIRE INDUSTRY Telma was founded in 1980 to deal with the works in wire drawing ˜eld. In the course of time, the company has manufactured the low carbon

TELMA WIRE INDUSTRY Telma was founded in 1980 to deal with the works in wire drawing �eld. In the course of time, the company has manufactured the low carbon (iron) coils in diameters between 1.5 mm and 10 mm and the straight wire between 5 cm and 5.5 meters. The products made of wire are given as follows; • Zinc plated – straight wire, roller handle and various products etc. • Ni-Cr plated – grid wires used inside the oven, shutters used in electrical heaters, baskets etc. • Rubber plated- deep-freeze baskets, commercial and home used refrigerator shelves etc.The bending process is applied to any kind of wires between 3 mm and 8 mm. In addition, the wire meshes can be manufactures in any requested length and design in wide of maximum 1600 mm by using the wires in diameters between 3 mm and 8 mm.

OUR MISSION: The mission of Telma is to bealeading supplier of quality wire and wire products. We promise our customers to ful�ll every need of them upon their requests. The preliminary obligation of us is to improve and support the sprit of awork team required for the satisfactory products in the industry.

OUR VISION:Our vision is to achieve and apply a “Total Quality” philosophy acting as a World Brand working with the high technology and the best quality system depending on the needs and requirements of the customers both in domestic and abroad markets.

Grids in various sizes

Refrigerator shelves

Refrigerator shelves

Special shelves forBottles

Cooler shelves

Deep Freeze Baskets

Baskets

Shutters

Shutters of electrical heater

Grids used inside the ovens

Various wired products

Atatürk Organize Sanayi Bölgesi 10002 Sokak No: 31 Çiği - İZMİR / TÜRKİYE Tel.: +90 232 376 72 67 (Pbx) • Fax: +90 232 376 70 33 www.telmatel.com • E-mail: [email protected]

W I R E A N D W I R E P R O D U C T S