TELL CATALOG - TAB 7 - DOORS AND FRAMES

tell dooRS & WindoWS— Page 1 — 2014

CORPORATE OFFICE: 2505 W. 11th Street, Houston, TX 77008 TOLL FREE: 877-956-2725 PHONE: 713-956-2725 FAX: 713-683-8695OTHER LOCATIONS: BIRMINGHAM, ALABAMA MIRA LOMA, CALIFORNIA ELKHART, INDIANA LITITZ, PENNSYLVANIA DALLAS, TEXAS

WEBSITE: www.tellmfg.com

Wind Rated / FloRida

appRoved

TIOGA DOORSTELL MFG offers a complete line of standard hollow metal doors to fit your needs. Doors are available in

20 and 18 gauge steel. All doors come with a polystyrene core as standard, making every door

smoother, flatter, and stronger. All door panels are manufactured from high quality galvannealed steel

and are thoroughly cleaned inside and out to insure excellent corrosion resistance and paint adhesion.

Doors come standard with a prime coat white or bronze, ready to be finished. Factory applied finish coat

paint is available in many colors. Contact customer service for pricing and quantities required, for factory

finish paint.

TELL MFG follows the same set of performance specifications as other door manufacturers, as set forth

in the Steel Door Institute (SDI) requirements.

— Insulated with polystyrene core— Non-handed— Galvannealed (standard)— Fire rated up to 3 hours— 7 gauge hinge reinforcements— Reinforced 161 lock prep

— Closer reinforcement (standard)— Meets ANSI standards— Universal 4 ½” hinge prep— Inverted top and bottom channel — Installed steel cap standard— Available with polyurethane core

FLUSH WITH

DEADBOLT

FLUSH VISION NARROW GLASS DUTCH DOOR

LOUVER-1 TOP LOUVER-1 VISION

LOUVER-1

NARROW LIGHT

LOUVER-1

HALF GLASS

LOUVER-1







KD Head Condition KD Jamb Profile KD Jamb Sill Condition

TYPICAL BASE AND WALL ANCHORS

HINGEREINFORCEMENT

STRIKEREINFORCEMENT

— 16 gauge for 1-3/4” doors— Precision bolted corners — Galvannealed (standard) — 7 gauge hinge reinforcements

— Heavy duty strike reinforcements — Meets ANSI standards — Universal 4 ½” hinge prep

METAL BUILDING FRAMES— Single Swing Frames / Non-Handed— Pedestrian Door Frame Head— Pedestrian Door Frame Hinge Jamb— Pedestrian Door Frame Strike Jamb

— Sill Section— Head to Girt Clip and Screw Pack— K.D. Frame Assembly Details

STOCK PROFILE

TIOGA OEM KNOCK DOWN FRAMETELL MFG offers in 16 gauge galvannealed steel. Frames are knock-down construction. FRAMES are availablefor 1 ¾” thick doors as standard. Precision bolted corners provide a smooth attractive design and allow easy

installation. FRAMES come standard with a prime coat ready to be finished white or bronze. Factory applied finishcoat paint is available in many colors. Contact customer service for pricing and quantities required, for factory

finish paint.

STANDARD FEATURES:

9î

9î

33î

33î




4-1/4” — 10-1/4” DEPTH KERFED




8-1/4” DEPTH KERFED

��

9î

9î

33î

33î












phone:fax:web:

WEIGHT:

0TDS-WS-01PER DETAIL

PER DETAIL

3/25/2010

PROPRIETARY AND CONFIDENTIAL

THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF TELL DOORS & WINDOWS, LLC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF TELL DOORS & WINDOWS, LLC. IS PROHIBITED.

COMMENTS:

SHEET: 1 OF 32

Q.A.

MFG APPR.

ENG APPR.

CHECKED

DRAWN

DATENAMEDIMENSIONS ARE IN INCHESTOLERANCES: PER SDI-117FRACTIONAL 1/16"ANGULAR: MACH 1º BEND 1ºTWO PLACE DECIMAL .06"THREE PLACE DECIMAL .031"UNLESS OTHERWISE NOTED

NEXT ASSEMBLY

TBD

APPLICATION

GAGE:

MATERIAL:

REV.

ASIZE

SCALE: NTS

Tell DOORS & WINDOWS, LLC.2505 West 11th StreetHouston, TX 77008

800-433-4047 713-683-8695

www.tellmfg.com

JSolomon

PART DESCRIPTION:

TIOGA DOORWAY SYSTEM - SINGLE WINDSTORM ASSEMBLY

FINISH:

PER ORDER

REMOVE ALL BURRS AND SHARP 1.EDGESDIMENSIONS IN ( ) ARE REFERENCE 2.ONLY AND TRIALS SHOULD BE COMPLETED TO ESTABLISH REQUIRED BEND ALLOWANCE

DWG. NO.:TDS-S-WS

USED ON

TBD

PART NO. :

TIOGA™ DOORWAY SYSTEMS - SINGLE- WINDSTORM ASSEMBLIES (TDS-S-WS)

THE FOLLOWING DOOR, FRAME AND HARDWARE SYSTEMS ARE DESIGNED TO MEET THE REQUIREMENTS OF:

TAS 201, IMPACT TEST PROCEDURES•TAS 202, CRITERIA FOR TESTING IMPACT & NON-IMPACT RESISTANT BUILDING ENVELOPE •COMPONENTS USING UNIFORM STATIC AIR PRESSURETAS 203, CRITERIA FOR TESTING PRODUCTS SUBJECT TO CYCLIC WIND PRESSURE LOADING•

LIMITS OF USEAPPROVED FOR USE IN HVHZ: YESAPPROVED FOR USE OUTSIDE HVHZ: YESIMPACT RESISTANT: YESDESIGN PRESSURE: +50/-50 PSFOTHER: NONE

SAMPLE: 0A (TDS-S-KD-A-WS)

TIOGA DOORWAY SYSTEM - SINGLE - WINDSTORM ASSEMBLYKNOCK-DOWN (KD) SYSTEM•

HARDWARE SET A1 CYLINDRICAL LOCK LC1200 SERIES, TELL MFG., INC.•3 HINGES, H4545BBNRP, TELL MFG., INC.•1 THRESHOLD, 1/2" HIGH ALUMINUM•1 SET KERF WEATHERSTRIPPING •1 DOOR SWEEP, DT100101, TELL MFG., INC.•

SAMPLE: 0B (TDS-S-KD-B-WS)


HARDWARE SET B1 MORTISE LOCK, ML1300 SERIES. TELL MFG., INC.•3 HINGES, H4545BBNRP, TELL MFG., INC.•1 THRESHOLD, 1/2" HIGH ALUMINUM•1 SET KERF WEATHERSTRIPPING •1 DOOR SWEEP, DT100101, TELL MFG., INC.•

SAMPLE: 0C (TDS-S-KD-C-WS)


HARDWARE SET C1 RIM PANIC DEVICE, 9500 SERIES, TELL MFG., INC.•3 HINGES, H4545BBNRP, TELL MFG., INC.•1 THRESHOLD, 1/2" HIGH ALUMINUM•1 SET KERF WEATHERSTRIPPING •1 DOOR SWEEP, DT100101, TELL MFG., INC.•

SAMPLE: 10A (TDS-S-PA-A-WS)

TIOGA DOORWAY SYSTEM - SINGLE - WINDSTORM ASSEMBLYPRE-ASSEMBLED (PA) SYSTEM•

HARDWARE SET ASAME AS 0A•

SAMPLE: 10B (TDS-S-PA-B-WS)


HARDWARE SET BSAME AS 0B•

SAMPLE: 10C (TDS-S-PA-C-WS)


HARDWARE SET CSAME AS 0C•

WIND RATED CERTIFICATION, FL APPROVAL # / WIND RATED ~ SINGLEFL # MODEL, NUMBER OR NAME DESCRIPTION

13889.4 TIOGA DOORWAY SYSTEM TIOGA DOORWAY SYSTEM TDS-S-PA-WS OS STEEL SINGLE DOOR

Limits of Use: Installation Instructions:

Approved for use in HVHZ: Yes FL13889 R0 II 08-01021.PDF

Approved for use outside HVHZ: Yes Verified By: Luis Roberto Lomas 62514

Impact Resistant: Yes Created by Independent Third Party: Yes

Design Pressure: +50/-50 Evaluation Reports:

Other: PRODUCT WAS NOT TESTED FOR WATER FL13889 R0 AE 511586.PDF

PENETRATION AND IS TO BE INSTALLED IN AREAS FL13889 R0 AE FOAM CERTIFICATE.PDF

WHERE WATER RESISTANCE IS NOT REQUIRED Created by Independent Third Party: Yes




TIOGA™ DOORWAY SYSTEMS - DOUBLE- WINDSTORM ASSEMBLIES (TDS-D-WS)

THE FOLLOWING DOOR, FRAME AND HARDWARE SYSTEMS ARE DESIGNED TO MEET THE REQUIREMENTS OF:

TAS 201, IMPACT TEST PROCEDURES•TAS 202, CRITERIA FOR TESTING IMPACT & NON-IMPACT RESISTANT BUILDING ENVELOPE •COMPONENTSUSING UNIFORM STATIC AIR PRESSURETAS 203, CRITERIA FOR TESTING PRODUCTS SUBJECT TO CYCLIC WIND PRESSURE LOADING•

LIMITS OF USEAPPROVED FOR USE IN HVHZ: YESAPPROVED FOR USE OUTSIDE HVHZ: YESIMPACT RESISTANT: YESDESIGN PRESSURE: +50/-50 PSFOTHER: NONE

SAMPLE: 20 (TDS-D-KD-D-WS)

TIOGA DOORWAY SYSTEM - DOUBLE - WINDSTORM ASSEMBLYKNOCK-DOWN (KD) FRAME•

HARDWARE SET D1 MORTISE LOCK, ML1300 SERIES. TELL MFG., INC.•6 HINGES, H4545BBNRP, TELL MFG., INC.•1 THRESHOLD, 1/2" HIGH ALUMINUM•1 SET KERF WEATHERSTRIPPING•2 SURFACE BOLTS, 988Y, YALE SECURITY, INC.•2 DOOR SWEEP, DT100101, TELL MFG., INC.•1 TWO PIECE STEEL ASTRAGAL / EDGE CHANNEL•

SAMPLE: 30 (TDS-D-PA-D-WS)

TIOGA DOORWAY SYSTEM - DOUBLE - WINDSTORM ASSEMBLYPRE-ASSEMBLED (PA) UNIT•

HARDWARE SET DHARDWARE SAME AS 20•

phone:fax:web:

WEIGHT:

0TDS-WS-01PER DETAIL

PER DETAIL

3/25/2010

PROPRIETARY AND CONFIDENTIAL

THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF TELL DOORS & WINDOWS, LLC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF TELL DOORS & WINDOWS, LLC. IS PROHIBITED.

COMMENTS:

SHEET: 24 OF 32

Q.A.

MFG APPR.

ENG APPR.

CHECKED

DRAWN

DATENAMEDIMENSIONS ARE IN INCHESTOLERANCES: PER SDI-117FRACTIONAL 1/16"ANGULAR: MACH 1º BEND 1ºTWO PLACE DECIMAL .06"THREE PLACE DECIMAL .031"UNLESS OTHERWISE NOTED

NEXT ASSEMBLY

TBD

APPLICATION

GAGE:

MATERIAL:

REV.

ASIZE

SCALE: NTS

Tell DOORS & WINDOWS, LLC.2505 West 11th StreetHouston, TX 77008

800-433-4047 713-683-8695

www.tellmfg.com

JSolomon

PART DESCRIPTION:

TIOGA DOORWAY SYSTEM - DOUBLEWINDSTORM ASSEMBLY

FINISH:

PER ORDER

REMOVE ALL BURRS AND SHARP 1.EDGESDIMENSIONS IN ( ) ARE REFERENCE 2.ONLY AND TRIALS SHOULD BE COMPLETED TO ESTABLISH REQUIRED BEND ALLOWANCE

DWG. NO.:TDS-D-WS

USED ON

TBD

PART NO. :

WIND RATED CERTIFICATION, FL APPROVAL # / WIND RATED ~ DOUBLEFL # MODEL, NUMBER OR NAME DESCRIPTION

13889.2 TIOGA DOORWAY SYSTEM TIOGA DOORWAY SYSTEM TDS-D-PA-WS OS STEEL DOUBLE DOOR

Limits of Use: Installation Instructions:

Approved for use in HVHZ: Yes FL13889 R0 II 08-01019.PDF

Approved for use outside HVHZ: Yes Verified By: Luis Roberto Lomas 62514

Impact Resistant: Yes Created by Independent Third Party: Yes

Design Pressure: +50/-50 Evaluation Reports:

Other: PRODUCT WAS NOT TESTED FOR WATER FL13889 R0 AE 511584.PDF

PENETRATION AND IS TO BE INSTALLED IN AREAS FL13889 R0 AE FOAM CERTIFICATE.PDF

WHERE WATER RESISTANCE IS NOT REQUIRED Created by Independent Third Party: Yes







WINDOW SPECIFICATIONS




WINDOW SPECIFICATIONS




R-U VALUE INSULATION SPECS FOR TIOGA KNOCK DOWN DOORSYSTEM, PAGE 1 OF 2




R-U VALUE INSULATION SPECS FOR TIOGA KNOCK DOWN DOOR SYSTEM,PAGE 2 OF 2




GIR

TAT

TAC

HM

ENTS

SPEC

IAL

KEY

ING

SITU

ATIO

NS

DO

NO

T PA

CK

LO

CK

S IN

FR

AM

E PA

CK

AG

ES,

SHIP

SEP

AR

ATEL

YA

LL D

OO

RS

AR

E TE

XTU

RED

SK

IN A

S S

TAN

DA

RD

. LI

ST IF

S

MO

OT

H S

KIN

IS N

EED

ED.

REV

ERSI

BLE

HA

ND

ING

R

DO

OR

SW

ING

HA

ND

ING

(IF O

RD

ERIN

G D

EA

D B

OLT

OR

GLA

SS

PR

EP

S,

SEE

HA

ND

ING

OPT

ION

S C

HA

RT

)

***

24 IN

CH

ES X

30

INC

HES

INSU

LATE

D G

LASS

6 IN

CH

ES X

30

INC

HES

TEM

PER

ED G

LASS

6 IN

CH

ES X

30

INC

HES

INSU

LATE

D G

LASS

BA

LL B

EAR

ING

, N

ON

-REM

OVE

AB

LE

PIN

HIN

GE

BB

NR

PA

DA

THR

ESH

OLD

THR

ESH

SWEE

PSW

EEP

KER

F W

EATH

ERST

RIP

KER

F

DO

OR

TR

IM S

ET(S

TAN

DA

RD

)

WIN

DO

W K

IT O

PTIO

NS

24 IN

CH

ES X

30

INC

HES

TEM

PER

ED G

LASS

24X3

0 TE

MP

24X3

0 IN

S6X

30 T

EMP

6X30

INS

HA

RD

WA

RE

OPT

ION

S

(LO

CK

S A

RE

PAC

KED

INTH

E FR

AM

E C

AR

TON

AS

STA

ND

AR

D.

IF P

REF

ERR

ED T

O S

HIP

SEP

AR

ATEL

Y,PL

EASE

LIS

T - S

EE S

PE

CIA

L C

ON

DIT

ION

S)

CYL

IND

RIC

AL

GR

AD

E 2

LEVE

R (S

TAN

DA

RD

)K

EYED

DIF

FER

ENT

(STA

ND

AR

D)

KEY

ED A

LIK

E (O

PT

ION

AL)

LC26

81

GR

AD

E 2

KN

OB

KEY

ED D

IFFE

REN

T (S

TAN

DA

RD

)K

EYED

ALI

KE

(OP

TIO

NA

L)K

C23

00

PAN

IC E

XIT

LEVE

RPA

NIC

GR

AD

E 1

CLO

SER

(STA

ND

AR

D)

CLO

SER

HEA

VY D

UTY

CLO

SER

CLO

SER

LATC

H G

UA

RD

LATC

HG

RA

DE

2 D

EAD

BO

LTD

B

GR

AD

E 1

LEVE

RK

EYED

DIF

FER

ENT

(STA

ND

AR

D)

KEY

ED A

LIK

E (O

PT

ION

AL)

LC12

00

MO

RTI

SE L

EVER

KEY

ED D

IFFE

REN

T (S

TAN

DA

RD

)K

EYED

ALI

KE

(OP

TIO

NA

L)M

L130

0

DO

OR

TYP

E

3070

LC26

81TK

DD

OEM

MET

AL

BU

ILD

ING

DO

OR

& F

RA

ME

SER

IES

TIO

GA

KN

OC

KD

OW

N D

OO

RTK

DD

TIO

GA

KN

OC

KD

OW

N F

RA

ME

TKD

F

GIR

T

SPEC

IAL

CO

ND

ITIO

NS

PLEA

SE IN

DIC

ATE

ON

OR

DER

/EX

AM

PLES

LIS

TED

GIR

TK

EYIN

GLO

CK

SSK

IN

30 =

3 F

EET,

0

INC

HES

WID

E70

= 7

FEE

T,

0 IN

CH

ES T

ALL

3070

24X3

0 TE

MP

40 =

4 F

EET,

0

INC

HES

WID

E70

= 7

FEE

T,

0 IN

CH

ES T

ALL

4070

60 =

6 F

EET,

0

INC

HES

WID

E70

= 7

FEE

T,

0 IN

CH

ES T

ALL

6070

OEM OEM

18 G

AU

GE

SKIN

(OP

TIO

NA

L)18

20 G

AU

GE

SKIN

(STA

ND

AR

D)

2020 GA

UG

E*

BB

NR

P

TEXT

UR

ED D

OO

RS

AVA

ILA

BLE

O

NLY

IN 2

0 G

AU

GE

AN

D 3

070

AN

D

6070

SIZ

ES

. NO

T AV

AIL

AB

LE IN

FI

RE

-RAT

ED

.SM

OO

TH D

OO

RS

AR

E A

VAIL

AB

LEU

PO

N R

EQ

UE

ST.

NO

T AV

AIL

AB

LE IN

FI

RE

-RAT

ED

.

SIZ

E A

ND

GA

UG

E N

OT

ES

:*

SIZE

*

A

OU

TSID

E O

F B

UIL

DIN

GA

I

B BI

C CI

D DI

HA

ND

ING

CH

AR

T D

OO

R S

WIN

G O

PT

ION

S:

SPEC

IFY

USI

NG

LET

TER

S SH

OW

N B

ELO

W***

WH

PAIN

T O

PTIO

NS TIO

GA

WH

ITE

WH

TIO

GA

BR

ON

ZE

BZ

R8-

1/4”

DEP

TH(S

TAN

DA

RD

SIZ

E)

4-1/

4” D

EPTH

(OP

TIO

NA

L)

6-1/

4” D

EPTH

(OP

TIO

NA

L)

10-1

/4”

DEP

TH(O

PT

ION

AL)

12-1

/4”

DEP

TH(O

PT

ION

AL)

5-3/

4” D

EPTH

(OP

TIO

NA

L)

**FR

AM

E / J

AM

B D

EPTH

814

414

614

1014

1214

534

GIR

T AT

TAC

HM

ENTS

(OP

TIO

NA

L)G

IRT

814

JAM

B D

EPTH

**FR

AM

E /

8-1/

4”

TIOGA KNOCK DOWN DOOR AND FRAME HOW TO ORDER CHART






DOORSTELL MFG offers a complete line of standard hollow metal doors to fit your needs. SPARTAN DOORS are avail-

able in 20 and 18 gauge steel. All doors come with a polystyrene core as standard, making every door

smoother, flatter, and stronger. SPARTAN DOORS are available in a complete range of fire ratings (up to 3

hours) and are certified by Underwriters Laboratories. All door panels are manufactured from high quality

galvannealed steel and are thoroughly cleaned inside and out to insure excellent corrosion resistance and

paint adhesion. SPARTAN DOORS come standard with a prime coat, ready to be finished. Factory applied fin-

ish coat paint is available in many colors. Contact customer service for pricing and quantities required, for

factory finish paint.

TELL MFG follows the same set of performance specifications as other door manufacturers, as set forth in

the Steel Door Institute (SDI) requirements.

— Insulated with polystyrene core— Non-handed— Galvannealed (standard)— Fire rated up to 3 hours— 7 gauge hinge reinforcements

— Reinforced 161 lock prep— Closer reinforcement (standard)— Meets ANSI standards— Universal 4 ½” hinge prep— Inverted top and bottom channel — Installed steel cap standard




Handing of doors and frames present a problem for many, even within the door industry.The below chart is designed to make your choice easy, reducing the chances of error.

SINGLE SWING DOORS

IN-S

WIN

G D

OO

RS

SINGLE SWING DOORS

OU

T-S

WIN

G D

OO

RS

RHA LHA

(Right Hand Active) (Left Hand Active)

RHR

(Right Hand Reverse) (Left Hand Reverse)

LHR

Inside

Outside

Inside

Outside

DOUBLE SWING DOORS

DOUBLE SWING DOORS

Inside

Outside

RH LH

(Right Hand) (Left Hand)

RHRA

(Right Hand Reverse Active)

LHRA

(Left Hand Reverse Active)

Inside

Outside

SPARTAN HOLLOW METAL HANDING CHART

Urethane Flush


CORPORATE OFFICE: 2505 W. 11th Street, Houston, TX 77008 TOLL FREE: 877-956-2725 PHONE: 713-956-2725 FAX: 713-683-8695

BOTTOM

TOP

4-1/2”HINGEPREP

B

C

AHINGESIDE

TOPOF

HINGE

LATCHSIDE

2-1/4”X

1-1/8”LATCHPREP

*WITH 3/4" UNDERCUT

DOOR HEIGHT*

6-5/8" 39-5/8" 72-5/8" 41-7/8"7'0"

OTHER SIZES AND HINGE LOCATIONSAVAILABLE ON REQUEST

A B C D

D

HINGECLOSEUP

LATCHCLOSEUP

DOOR DIMENSIONS

3’0

4-1/2”

4-1/2”

4-1/2”




SPARTAN DOORS COLOR OPTIONS

TIOGA BRONZEBZ

BRIGHT WHITE

BW

NOTE: ACTUAL COLORS MAY VARY FROM THOSE SHOWN DUE TO LIMITATIONS OF THE PRINTING PRODUCTION PROCESS.

MEDIUM GRAY(MSD/PRIMER GRAY)PR













R-U VALUE INSULATION SPECS FOR SPARTAN DOORS, PAGE 1 OF 2




R-U VALUE INSULATION SPECS FOR SPARTAN DOORS, PAGE 2 OF 2




OPT

ION

S

DEA

D B

OLT

INVI

SIB

LE D

EAD

BO

LT P

REP

NO

CLO

SER

REI

NFO

RC

EMEN

T

AM

WEL

D /

STEE

LCR

AFT

/ R

EPU

BLI

CSM

OO

TH F

LUSH

TEXT

UR

ED F

LUSH

18 G

AU

GE

GA

LVA

NN

EAL

16 G

AU

GE

GA

LVA

NN

EAL

DO

OR

ED

GE

AN

DH

ING

E TY

PES

DO

OR

SER

IES

SIZE

DH

MU

F30

70

LOC

K O

PTIO

NS

PAIN

T O

PTIO

NS

161

SQSQ

UA

RE

EDG

E W

/ C

UT

THR

U H

ING

ESSQ

SPA

RTA

N D

OO

R

HO

LLO

W M

ETA

L /

UR

ETH

AN

E C

OR

ED

HM

U

SPA

RTA

N D

OO

R

HO

LLO

W M

ETA

L /

POLY

STYR

ENE

CO

RE

DH

M

FIN

ISH

HIN

GE

PATT

ERN

OPT

ION

S

FA

AM

WEL

D R

EVER

SIB

LEA

RC

ECO

CE

PIO

NEE

RPI

CU

RR

IES

/ PR

EMIE

RC

UTI

MEL

YTM

NO

HIN

GE

PREP

NH

DO

MIN

ION

/ D

IAM

ON

DD

O

X

DB

NC

RSE

E C

HA

RT

BEL

OW

**

DO

OR

DES

IGN

S

IDB

DB

AB

W30

= 3

FEE

T,

0 IN

CH

ES W

IDE

70 =

7 F

EET,

0

INC

HES

TA

LL

3070

GA

UG

E

18A

20 G

AU

GE

GA

LVA

NN

EAL

20A

STA

ND

AR

D C

YLIN

DER

PREP

2-3

/4”

BA

CK

SET

161

MO

RTI

SE B

OX

WIT

H O

VAL

CU

T-O

UT

& M

OR

TISE

ED

GE

PREP

86M

OR

TISE

BO

X W

ITH

NO

CU

T-O

UT;

M

OR

TISE

ED

GE

PREP

ON

LY00

BLA

NK

: NO

FA

CE

OR

ED

GE

PREP

B

AB

OVE

WIT

H P

RO

VISI

ON

FO

R L

EVER

TH

RU

-BO

LTS

161L

WIN

D R

ATED

161W

R16

A

20A

** D

OO

R D

ESIG

NS

/ WIN

DO

W O

PTIO

NS

(ALL

OPT

ION

S N

OT

LIST

ED, P

LEA

SE C

ON

TAC

TC

UST

OM

ER S

ERVI

CE

FOR

MO

RE

OPT

ION

S)

FLU

SH

HA

LF G

LAS

SFU

LL G

LAS

SN

AR

RO

W L

ITE

VIS

ION

PA

NE

L

*FIR

E R

ATED

DO

OR

S - S

TAN

DA

RD

— 1

.5 H

OU

RS

ON

20

GA

UG

E D

OO

RS

— 3

HO

UR

S O

N 1

8 G

AU

GE

DO

OR

S

DO

OR

HA

ND

ING

CH

AR

TOU

T-SW

ING

DOOR

SSI

NGLE

SW

ING

DOOR

S

RHR

(Rig

ht H

and

Reve

rse)

(Lef

t Han

d Re

vers

e)

LHR

Insi

de

Outs

ide

DOUB

LE S

WIN

G DO

ORS

RHRA

(Rig

ht H

and

Reve

rse

Activ

e)

LHRA

(Lef

t Han

d Re

vers

e Ac

tive)

Insi

de

Outs

ide

BR

IGH

T W

HIT

E (T

ELST

AR

)B

WM

EDIU

M G

RAY

(MSD

/ PR

IMER

GR

AY)

PRB

RO

NZE

(TIO

GA

)B

Z*

SPARTAN DOOR HOW TO ORDER CHARTMANUFACTURED STEEL DOOR (MSD SERIES)




FRAMESTELL MFG offers SPARTAN FRAMES in 16 gauge galvannealed steel. Frames are knock-down construction and

are designed to be installed on standard and non-standard wall sizes over pre-finished or unfinished drywall.

SPARTAN steel frames are available for 1-3/4” thick doors. They have precision mitered corners, providing a

smooth attractive design and easy installation. SPARTAN FRAMES come standard with a prime coat, ready to be

finished. Factory applied finish coat paint is available in many colors. Contact customer service for pricing and

quantities required, for factory finish paint.

TELL MFG follows the same set of performance specifications as other door manufacturers, as set forth in the

Steel Door Institute (SDI) requirements.




COMPRESSIONANCHOR

DRYWALL FRAMES (DW)

Jamb Size = Throat Size +1

4-5/8" or 4-7/8"Standard Throat SizeAvailable 3-1/2”-8”

2"

1-9/16" 1-15/16"

TYPICAL WALL CONSTRUCTIONUnequal Rabbet Frame

— 16 gauge for 1-3/4” doors— Precision fitted corners — Galvannealed (standard) — 7 gauge hinge reinforcements — Heavy duty strike reinforcements

— Fire rated up to 1-1/2 hours. Available on frame openings up to 8’-0” high and 3’-8” wide single door, 7’-4” double door.

— Meets ANSI standards — Universal 4 ½” hinge prep

STANDARD FEATURES:

All SPARTAN DRYWALL FRAMES come with adjustable compression anchors in each jamb. These anchors

provide a tight rigid fit in the opening.




ENGINEERING DATA FOR SPARTAN DRYWALL FRAMES

SPECIFICATIONS:

1. Will accommodate 1-3/4” doors.

2. Frames are manufactured from 16 gage steel.

A1008, or Galvannealed ASTM A653.

3. Frames are knocked down and field assembled

with mitered corner joint. Welded frames are avail-

able.

4. Integral compression anchors allow easy

adjustment.

5. Snap-in, strap or dimple base anchors available.

6. Head jambs are reinforced with closer reinforce-

ments when required.

7. Hinge reinforcements are 10 ga (.125min) steel.

8. Strike preparation is 4-7/8 ASA with integral box.

Deadbolt strike preps available.

9. Hinge and strike locations are available in manu-

facturers standard locations. Custom locations are

available special order.

10.Frames are prepped for three silencers per single

frames.

11. Frames are e-coated with environmentally friendly

water base gray. E-coat will serve as primer or top

coat. Special colors available on volume orders.

12.Shim plate is attached for on-site vertical

shimming.

13.Fire rating (UL) is available for most sizes.

14.Frame structure complies with ANSI A250.8-2003.

15.Hardware preparations, reinforcements and

locations comply with ANSI A250.6-2003 and

ANSI/BHMA A156.115.

Jamb Size = Throat Size +1

4-5/8" or 4-7/8"Standard Throat SizeAvailable 3-1/2”-8”

2"

1-9/16" 1-15/16"




HINGEREINFORCEMENT

STRIKEREINFORCEMENT

1-9/16"2-1/4"

1-15/16"

Throat Size5” min - 13” max

2"

Jamb Size = Throat Size + 1”

One Piece WeldedBased Anchor Masonry Wire Anchor

Existing OpeningAnchor (E.O.A.)

TYPICAL BASE AND WALL ANCHORS

SPOTWELDEDTO FRAME

SUPPORT HATSPOTWELDEDTO FRAME

5/16” DIA.

STOCK PROFILE

MASONRY FRAMES (MS) TELL MFG offers SPARTAN MASONRY FRAMES in 16 gauge galvannealed steel. Frames are knock-down construc-

tion designed to be installed as a welded frame, or can be used as non welded. SPARTAN MASONRY FRAMES are

available for 1 ¾” thick doors as standard. Precision interlocking corners provide a smooth attractive design

and allow easy installation. SPARTAN MASONRY FRAMES come standard with a prime coat, ready to be finished.

Factory applied finish coat paint is available in many colors. Contact customer service for pricing and quantities

required, for factory finish paint.

STANDARD FEATURES:

SPARTAN MASONRY FRAMES come with ½” returns. Masonry, Wood, and Existing Opening Anchoring (E.O.A.)

systems are all available.

— 16 gauge for 1-3/4” doors— Precision fitted corners — Galvannealed (standard) — 7 gauge hinge reinforcements

— Heavy duty strike reinforcements — Fire rated up to 3 hours— Meets ANSI standards — Universal 4 ½” hinge prep




SPARTAN FRAMES COLOR OPTIONS

TIOGA BRONZEBZ

BRIGHT WHITE

BW

NOTE: ACTUAL COLORS MAY VARY FROM THOSE SHOWN DUE TO LIMITATIONS OF THE PRINTING PRODUCTION PROCESS.

MEDIUM GRAY(MSD/PRIMER GRAY)PR




CLO

SER

REI

NFO

RC

EMEN

T

UL

LAB

ELA

MW

ELD

REV

ERSI

BLE

PIO

NEE

R

CEC

O

CU

RR

IES

/ PR

EMIE

R

DO

MIN

ION

TIM

ELY

AM

WEL

D /

STEE

LCR

AFT

/ R

EPU

BLI

C

RIG

HT

HA

ND

LEFT

HA

ND

HA

ND

ING

FRA

ME

SER

IES

SIZE

FR30

70

GA

UG

E*

HIN

GE

PATT

ERN

OPT

ION

S

16LHR

H LHSP

AR

TAN

FRA

ME

FR

AD

DIT

ION

S ~

NR

= N

O R

ETU

RN

, K

F =

KER

F ST

YLE

MET

AL

BU

ILD

ING

(KN

OC

K D

OW

N)

MA

SON

RY W

/ DO

UB

LE R

ETU

RN

MA

SON

RY W

/ SIN

GLE

RET

UR

N,

MIT

ER C

OR

NER

S

DRY

WA

LL W

/ DO

UB

LE R

ETU

RN

TELS

TAR

PR

O

TELS

TAR

STA

ND

AR

D

TIO

GA

PRE-

ASS

EMB

LED

TI

PRO

FILE

TITSTPDWMS

MS2MB

NR

KF

AD

DIT

ION

S ~

TIO

GA

SIN

GLE

RA

BB

ETTI

SRA

DD

ITIO

NS

~ 2

= D

OU

BLE

RET

UR

N2

ASA

STR

IKE

/ STA

ND

AR

D

CYL

IND

ER P

REP

ASA

STR

IKE

INVI

SIB

LE D

EAD

BO

LT

ASA

STR

IKE

DEA

DB

OLT

BLA

NK

/ N

O S

TRIK

E

LOC

K O

PTIO

N

ASA

ASA

IDB

ASA

DB

BL

ASA

A30

= 3

FEE

T, 0

INC

HES

WID

E70

= 7

FEE

T, 0

INC

HES

TA

LL30

7030

= 3

FEE

T, 0

INC

HES

WID

E68

= 6

FEE

T, 8

INC

HES

TA

LL30

6830

= 3

FEE

T, 0

INC

HES

WID

EH

D =

HEA

DER

Com

pone

nt30

HD

60 =

6 F

EET,

0 IN

CH

ES W

IDE

HD

= H

EAD

ER C

ompo

nent

60H

D60

= 6

FEE

T, 8

INC

HES

WID

EH

J =

HIN

GE

JAM

B C

ompo

nent

68H

J

60 =

6 F

EET,

8 IN

CH

ES W

IDE

SJ =

STR

IKE

JAM

B C

ompo

nent

68SJ

70 =

7 F

EET,

0 IN

CH

ES W

IDE

SJ =

STR

IKE

JAM

B C

ompo

nent

70SJ

70 =

7 F

EET,

0 IN

CH

ES W

IDE

HJ

= H

ING

E JA

MB

Com

pone

nt70

HJ

5-3/

4” D

EPTH

534

4” D

EPTH

400

4-3/

4” D

EPTH

4-1/

4” D

EPTH

6-1/

4” D

EPTH

8-1/

4” D

EPTH

434

414

614

814

16 G

AU

GE

GA

LVA

NN

EAL

1614

GA

UG

E G

ALV

AN

NEA

L, O

PTIO

NA

L 14

OPT

ION

S

CR

CR UL

A AR PICE

CU

DO

TM

BW

PAIN

T O

PTIO

NS BR

IGH

T W

HIT

E (T

ELST

AR

)B

WM

EDIU

M G

RAY

(MSD

/ PR

IMER

GR

AY)

PRB

RO

NZE

(TIO

GA

)B

Z

*JA

MB

DEP

TH

THR

OAT

DEP

TH

NO

TE:

If th

e “T

HR

OAT

DEP

TH”

dim

ensi

on is

kno

wn,

ad

d 1”

for “

JAM

B D

EPTH

” di

men

sion

534

*FIR

E R

ATED

FR

AM

ES -

STA

ND

AR

D—

1.

5 H

OU

RS

ON

16

GA

UG

E F

RA

ME

S—

O

PTIO

NA

L ~

3 H

OU

RS

UP

ON

RE

QU

ES

T

AS

PE

RM

ITTE

D

SPARTAN FRAMES HOW TO ORDER CHARTMANUFACTURED STEEL FRAMES (MSD SERIES)













R-U VALUE INSULATION SPECS FOR TELSTAR DOORS, PAGE 1 OF 2




R-U VALUE INSULATION SPECS FOR TELSTAR DOORS, PAGE 2 OF 2




STEE

LA

LL D

OO

RS

& F

RA

MES

AR

EA

40 G

ALV

ALU

ME

STEE

L

A40

30 =

3 F

EET,

0 IN

CH

ES W

IDE

68 =

6 F

EET,

8 IN

CH

ES T

ALL

INVI

SIB

LE D

EAD

BO

LT

DEA

DB

OLT

DB

IDB

DO

OR

HO

LLO

W M

ETA

L

SIZE

DR

3068

DB

DEA

DB

OLT

10”

X 10

”,

BLA

NK

/ N

O W

IND

OW

DR

WIN

DO

W S

IZE C

OLO

R O

F PA

INT

OPT

ION

S

W/1

0X10

W/1

0X10

30 =

3 F

EET,

0 IN

CH

ES W

IDE

70 =

7 F

EET,

0 IN

CH

ES T

ALL

PRO

SER

IES

3070

PRO

30 =

3 F

EET,

0 IN

CH

ES W

IDE

68 =

6 F

EET,

8 IN

CH

ES T

ALL

PRO

SER

IES

3068

PRO

STA

ND

AR

DSE

RIE

S ST

AN

DA

RD

3068

60 =

3 F

EET,

0 IN

CH

ES W

IDE

68 =

6 F

EET,

8 IN

CH

ES T

ALL

STA

ND

AR

DSE

RIE

S ST

AN

DA

RD

6068

OFF

WH

ITE

OW

OW

LIG

HT

GR

AYG

RB

RIG

HT

WH

ITE

BW

TRU

E W

HIT

E (3

070

PR

O S

ERIE

S)W

HB

RO

NZE

(307

0 P

RO

SER

IES)

BZ

RO

UG

H O

PEN

ING

SIZ

E

3068

TELS

TAR

STA

ND

AR

D

60 =

6 F

EET,

0 IN

CH

ES W

IDE

70 =

7 F

EET,

0 IN

CH

ES T

ALL

PRO

SER

IES

PRO

6070

60 =

6 F

EET,

0 IN

CH

ES W

IDE

68 =

6 F

EET,

8 IN

CH

ES T

ALL

PRO

SER

IES

PRO

6068

RIG

HT

HA

ND

REV

ERSE

LEFT

HA

ND

REV

ERSE

HA

ND

ING

*

RH

RLH

R

RH

R35

.5 X

79.

7535

.5”

X 79

.75”

6068

TELS

TAR

STA

ND

AR

D71

.5”

X 79

.75”

3068

TELS

TAR

PR

O S

TAN

DA

RD

38”

X 81

”30

70TE

LSTA

R P

RO

STA

ND

AR

D

6068

TELS

TAR

PR

O S

TAN

DA

RD

6070

TELS

TAR

PR

O S

TAN

DA

RD

38”

X 85

”74

” X

81”

74”

X 85

”

*DO

OR

HA

ND

ING

CH

AR

TOU

T-SW

ING

DOOR

SSI

NGLE

SW

ING

DOOR

S

RHR

(Rig

ht H

and

Reve

rse)

(Lef

t Han

d Re

vers

e)

LHR

Insi

de

Outs

ide

DOUB

LE S

WIN

G DO

ORS

RHRA

(Rig

ht H

and

Reve

rse

Activ

e)

LHRA

(Lef

t Han

d Re

vers

e Ac

tive)

Insi

de

Outs

ide

TELSTAR DOORHOW TO ORDER CHART




Standard Features:n Door Leaf 20 gauge insulated door, galvanized, heavy duty hinge reinforcements, non-handed

(reversible)

n Frame 16 gauge, galvanized, heavy duty hinge reinforcement, non-handed (reversible),

standard profile

n Sub Frame 16 gauge, galvannealed, paintable

n Hardware Extra heavy duty lever lock (LC2481 CTL 26D), latchguard, 4.5” x 4.5” BB NRP hinges

26D, threshold ADA compliant, door bottom sweep, adjustable weather seal, adjustable

“L” mounting clips

n SDI Standards TELL MFG follows the same set of performance specifications as other door manufacturers, as set

forth in the Steel Door Institute (SDI) requirements.

Common Features: — Complete preassembly in factory

— White or Bronze finish

— Heavy duty crating, per job

Optional Features: — Door(s) may be upgraded to 18 gauge.

— All hardware sold by Tell Manufacturing, Inc. can be added or substituted as an option.

— Masonry system available

— Fire rated system available




A

SWING: SPECIFY USING LETTERS SHOWN BELOW

OUTSIDE OF BUILDING

AI

B

BI

C

CI

D

DI

TIOGA METAL BUILDING HANDING CHARTHanding of doors and frames present a problem for many, even within the door industry. The below

chart is designed to make your choice easy, reducing the chances of error.

At TELL MANUFACTURING, INC., our goal is to reduce problems that often arise for the builders / erec-

tors. The TIOGA preassembled door system is a result of this effort. With complete factory assembly of

all components — door, frame, sub frame and hardware — problems found during field installation are

held to a minimum. Typical field installation is usually completed in under 30 minutes. Time normally

added for the field installation of numerous options are now a thing in the past. We invite you to "expe-

rience the difference" of how the TIOGA door system can benefit your company.




R-U VALUE INSULATION SPECS FOR TIOGA DOORS, PAGE 1 OF 2




R-U VALUE INSULATION SPECS FOR TIOGA DOORS, PAGE 2 OF 2




BA

LL B

EAR

ING

, N

ON

-REM

OVE

AB

LE

PIN

HIN

GE

(STA

ND

AR

D)

BB

NR

P

HIN

GES

WIN

DO

W K

IT O

PTIO

NS

6 IN

CH

ES X

30

INC

HES

TEM

PER

ED G

LASS

6X30

TEM

P

6 IN

CH

ES X

30

INC

HES

INSU

LATE

D G

LASS

6X30

INS

16 IN

CH

ES X

16

INC

HES

TEM

PER

ED G

LASS

16X1

6 TE

MP

16 IN

CH

ES X

16

INC

HES

INSU

LATE

D G

LASS

16X1

6 IN

S

24 IN

CH

ES X

30

INC

HES

TEM

PER

ED G

LASS

24X3

0 TE

MP

24 IN

CH

ES X

30

INC

HES

INSU

LATE

D G

LASS

24X3

0 IN

S

10 IN

CH

ES X

10

INC

HES

TEM

PER

ED G

LASS

10X1

0 TE

MP

10 IN

CH

ES X

10

INC

HES

INSU

LATE

D G

LASS

10X1

0 IN

S

HA

RD

WA

RE

OPT

ION

SGR

AD

E 1

LEVE

RLC

1200

GR

AD

E 2

CYL

IND

RIC

AL

LEVE

R(S

TAN

DA

RD

)LC

2481

GR

AD

E 2

DEA

DB

OLT

DB

GR

AD

E 1

CLO

SER

CLO

SER

LATC

H G

UA

RD

LATC

H

MO

RTI

SE L

EVER

ML1

300

PAN

IC L

EVER

EXIT

DO

OR

TYP

E

3070

LC12

00A

LEFT

HA

ND

REV

ERSE

ALE

FT H

AN

DA

I

RIG

HT

HA

ND

REV

ERSE

BR

IGH

T H

AN

DB

I

LEFT

HA

ND

REV

ERSE

AC

TIVE

C

LEFT

HA

ND

AC

TIVE

CI

RIG

HT

HA

ND

REV

ERSE

AC

TIVE

D

RIG

HT

HA

ND

AC

TIVE

DI

DO

OR

SER

IES

STD

STA

ND

AR

D T

IOG

APR

E-A

SSEM

BLE

DD

OO

R

MA

SON

RY

STD

EXIS

TIN

G

OPE

NIN

G A

NC

HO

RS

EXTE

ND

EDG

IRT

HEI

GH

T***

EXTR

AC

LIPS

CA

LL-O

UT

CU

RB

WA

LL

SPEC

IAL

KEY

ING

SITU

ATIO

NS

SPEC

IAL

CO

ND

ITIO

NS

PLEA

SE IN

DIC

ATE

ON

OR

DER

/EX

AM

PLES

LIS

TED

EOA

EOA

GIR

TC

LIP

CU

RB

KEY

ING

30 =

3 F

EET,

0

INC

HES

WID

E70

= 7

FEE

T,

0 IN

CH

ES T

ALL

3070

6X30

TEM

P

40 =

4 F

EET,

0

INC

HES

WID

E70

= 7

FEE

T,

0 IN

CH

ES T

ALL

4070

60 =

6 F

EET,

0

INC

HES

WID

E70

= 7

FEE

T,

0 IN

CH

ES T

ALL

6070

MA

MA

FIR

E R

ATED

FR20

GA

UG

E TE

XTU

RED

SK

IN(O

PT

ION

AL)

20X

18 G

AU

GE

SKIN

(OP

TIO

NA

L)18

A

20 G

AU

GE

SKIN

(STA

ND

AR

D)

20A

20A

GA

UG

E*

BB

NR

P

FIR

E R

ATED

DO

OR

S - S

TAN

DA

RD

— 1

.5 H

OU

RS

ON

20

GA

UG

E D

OO

RS

— 3

HO

UR

S O

N 1

8 G

AU

GE

DO

OR

STE

XTU

RED

DO

OR

S AV

AIL

AB

LE O

NLY

IN 2

0 G

AU

GE

A

ND

307

0 A

ND

607

0 S

IZE

S. N

OT

AVA

ILA

BLE

IN F

IRE

-RAT

ED

.FI

RE-

RAT

ED A

ND

18

GA

UG

E D

OO

RS

NE

ED

HE

AVY-

DU

TY

CLO

SE

R T

O M

EE

T R

EQ

UIR

EM

EN

TS.

SA

ME

AP

PLI

ES

TO

407

0 D

OO

RS

.

SIZ

E A

ND

GA

UG

E N

OT

ES

:*

4-3/

4” -

SP

EC

IAL

OR

DE

R, 2

-5 W

EE

KS

LE

AD

TIM

E6-

1/2”

- S

PE

CIA

L O

RD

ER

, 2-5

WE

EK

S L

EA

D T

IME

7”- S

PE

CIA

L O

RD

ER

, 2-5

WE

EK

S L

EA

D T

IME

8” -

IN S

TOC

K S

IZE

8-1/

2” -

IN S

TOC

K S

IZE

9-1/

2” -

SP

EC

IAL

OR

DE

R, 2

-5 W

EE

KS

LE

AD

TIM

E10

” - S

PE

CIA

L O

RD

ER

, 2-5

WE

EK

S L

EA

D T

IME

12”

- SP

EC

IAL

OR

DE

R, 2

-5 W

EE

KS

LE

AD

TIM

E

GIR

T (

SU

BJA

MB

) W

IDT

H O

PT

ION

S***

SIZE

*

DO

OR

SW

ING**

***

A

OU

TSID

E O

F B

UIL

DIN

GA

I

B BI

C CI

D DI

DO

OR

SW

ING

: SP

ECIF

Y U

SIN

G L

ETTE

RS

SHO

WN

BEL

OW

**

WH

PAIN

T O

PTIO

NSTIO

GA

WH

ITE

WH

TIO

GA

BR

ON

ZE

BZ

TIOGA PRE-ASSEMBLED DOOR HOW TO ORDER CHART




Wood Doors

n TELL MFG follows the same set of performance specifications as other door manufacturers, as set forth in the Steel Door Institute (SDI) requirements.

Birch Door n 1-3/4” solid core unfinished hardwooddoor with a birch veneer

n Standard size 3'0" x 6'8" x 1-3/4"

n Handed

n 20 minute fire rated

n Beveled lock edge

n Standard lock prep for 2-3/4" backsetcylindrical lock

n Standard hinge prep for 3 each 4-1/2" x4-1/2" standard weight hinges

Oak Door n 1-3/4” solid core prefinished door withan embossed imperial oak veneer

n Standard size 3'0" x 6'8" x 1-3/4"

n Handed

n 20 minute fire rated

n Beveled lock edge

n Standard lock prep for 2-3/4" backsetcylindrical lock

n Standard hinge prep for 3 each 4-1/2"x 4-1/2" standard weight hinges




BIR

CHIM

PER

IAL

OA

K

EMB

OSS

ED

1-3/

4” IN

CH

ES

1-3/

8” IN

CH

ES

HA

ND

ING

(OPT

ION

AL)

SEE

HA

ND

ING

CH

AR

T**

LEFT

HA

ND

(IN

-SW

ING

)

RIG

HT

HA

ND

(IN

-SW

ING

)

HO

LLO

W C

OR

E

FULL

GLA

SS

HA

LF G

LASS

THIC

KN

ESS

BIR

FIN

ISH

(OT

HE

RFI

NIS

HE

SA

VA

ILA

BLE

)D

OO

R P

REP

UN

F13

413

413

8

CO

RE

BIR

HC

PAR

TIC

LE C

OR

EPC

20 M

INU

TEPA

RTI

CLE

CO

RE

(FIR

E R

ATED

)20

45 M

INU

TEM

INER

AL

CO

RE

(FIR

E R

ATED

)45

60 M

INU

TEM

INER

AL

CO

RE

(FIR

E R

ATED

)60

90 M

INU

TEM

INER

AL

CO

RE

(FIR

E R

ATED

)90

IMPO

KPL

AIN

SLI

CED

RED

OA

KPS

RO

KW

ALN

UT

EMB

OSS

EDW

ALN

T

LHRH

RIG

HT

HA

ND

REV

ERSE

(OU

T-SW

ING

)R

HR

LEFT

HA

ND

REV

ERSE

(OU

T-SW

ING

)LH

R

LH

HC

A

DO

OR

DES

IGN

SSE

E C

HA

RT

BEL

OW

*

FGFL

USH

FU

NFI

NIS

HED

UN

FC

LEA

RC

LRH

G

BIF

OLD

BF

NA

RR

OW

LIT

EN

LVI

SIO

N P

AN

ELVPF

* DO

OR

DES

IGN

S / W

IND

OW

OPT

ION

S(A

LL O

PTIO

NS

NO

T LI

STED

, PLE

ASE

CO

NTA

CT

CU

STO

MER

SER

VIC

E FO

R M

OR

E O

PTIO

NS)

FLU

SHN

AR

RO

W L

ITE

VISI

ON

PA

NEL

FULL

GLA

SSH

ALF

GLA

SS

**D

OO

R H

AN

DIN

G C

HA

RT

AM

WEL

DA

TIM

ELY

TMC

ECO

CE

SIZE

(OTH

ER S

IZES

AVA

ILA

BLE

)

30 =

3 F

EET,

0

INC

HES

WID

E68

= 6

FEE

T,

8 IN

CH

ES T

ALL

3068

30 =

3 F

EET,

0

INC

HES

WID

E70

= 7

FEE

T,

0 IN

CH

ES T

ALL

3070

3068

WO

OD

DO

OR

DO

OR

SER

IES

WD

WD

BIF

OLD

SING

LE S

WIN

G DO

ORS

IN-SWING DOORS

SING

LE S

WIN

G DO

ORS

OUT-SWING DOORSRH

ALH

A

(Rig

ht H

and

Activ

e)(L

eft H

and

Activ

e)

RHR

(Rig

ht H

and

Reve

rse)

(Lef

t Han

d Re

vers

e)

LHR

Insi

de

Outs

ide

Insi

de

Outs

ide

DOUB

LE S

WIN

G DO

ORS

DOUB

LE S

WIN

G DO

ORS

Insi

de

Outs

ide

RHLH

(Rig

ht H

and)

(Lef

t Han

d)

RHRA

(Rig

ht H

and

Reve

rse

Activ

e)

LHRA

(Lef

t Han

d Re

vers

e Ac

tive)

Insi

de

Outs

ide

VEN

EER

(OT

HE

R V

EN

EE

RS

AV

AIL

AB

LE)

WOOD DOOR HOW TO ORDER CHART




FOR ADJUSTABLE AND STANDARD TIMELY FRAME INSTALLATION VIDEOS, PLEASE GO TO OUR WEBSITE =http://www.tellmfg.com/Timely_Doors_ADJ_FRAME_INSTALL_VIDEO.html

n TELL MFG follows the same set of performance specifications as other door manufacturers, as set forth in the Steel Door Institute (SDI) requirements.













TELL MANUFACTURING, INC. and TELL DOOR AND WINDOWS, LLC, (henceforth referred to as “TELL” or “Manufacturer”) man-ufacturers of commercial grade door and frames, hereby offers the following described warranty.

ALL doors and door frames manufactured by the above company(s) carry a full one year warranty. Said product will be freefrom defects in workmanship and material for a period of one year from date of purchase. This warranty further extends todefects of splitting, cracking or deterioration due to rusting through of the product, from the date of purchase. If during thisperiod a door or frame is found defective in workmanship or material, such claim must be submitted to Tell Manufacturing,18 Richard Drive, Lititz, PA 17543; Attention: Claims Department. TELL reserves the right to send an approved represen-tative to inspect on site or may require photographs be sent showing the item(s) in question. Upon inspection if the item(s)is deemed defective or faulty, Authorization for repair or replacement will be made at TELL’S option. The item(s) will be pro-vided at no charge to the customer. No warranty is extended by the manufacturer for any field labor, travel time, or freightinvolving said item(s).

All products must be stored on site, installed properly and maintained in accordance with Manufacturer’s instructions. Thiswarranty shall be null and void if the product is not stored, installed properly and maintained pursuant to the Manufacturer’sspecifications and/or instructions. This warranty does not extend to normal wear or to damage by circumstances beyond theManufacturer’s control and is VOID when any component part or the complete door unit fails, due to the following: alteration,misuse, negligence, accident, improper installation, lightning, water damage, exposure to corrosive fumes or chemicals, con-densation, fire, riots, war or any acts of God, or when performance coatings used to finish the door are not suitable. NOWARRANTY is extended by the Manufacturer for broken windows or light frames or for the indirect cost (ie. shipping, fieldlabor) which may be required to repair or replace defective part(s). NO WARRANTY is extended by the Manufacturer forminor scratches, rubs or slight variations in color of doors and frames, as these are not considered defects.

Claims must be made within fifteen (15) calendar days of the discovery of the suspected defect and such notice shall indi-cate the nature of the defect. The full and proper address, contact name, and telephone number for a return reply must beincluded. Photographs of the problem should accompany a claim if at all possible. After receiving notification of a claim, aTELL field representative shall be permitted to inspect if needed. Inspection will be performed within a reasonable period oftime, and if upon verification a defect due to defective materials or faulty workmanship on the part of the manufacturer isfound, and not caused by the aforementioned exclusions, the repair(s) or replacement(s) (Manufacturer’s option), exclusive oflabor or freight will be made at no cost to the owner.

TELL provides product pre-painted. Each door and frame is carefully constructed of corrosion resistant galvanized/galval-ume steel. All door and frame products are factory prefinished with a low gloss industrial quality paint which is designed tomeet or exceed the paint requirements for steel doors and frames, as set by the Steel Door Institute. This allows a customerthe option of applying a final coat of paint, or no additional painting is required to honor the 1 year warranty. No claim is madethat this is to be considered a long term finish/final coat. Manufacturer does not consider minor scratches or rubs to bedefects. Variations in color may occur.

Products stored “on site” awaiting building construction, must be uncrated and stored at a minimum incline of thirty degreesto allow for proper drainage and drying. Failure to do so may result in paint adhesion failure. NO WARRANTY is extended by the manufacturer for paint adhesion failure due to improper storage of the product.

THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED AND ALL OTHER OBLI-

GATIONS OR LIABILITIES OF TELL MANUFACTURING, INC. AND TELL DOOR AND WINDOW, LLC. THIS WARRAN-

TY NEITHER ASSUMES NOR AUTHORIZES ANY PERSON TO ASSUME FOR TELL ANY OTHER OBLIGATION OR

LIBILITIES IN CONNECTION WITH SAID DOORS AND FRAMES. TELL’S LIABILITY SHALL BE LIMITED TO REPLAC-

ING OR REPAIRING THE MATERIAL FOUND TO BE DEFECTIVE AND TELL SHALL NOT BE RESPONSIBLE FOR ANY

INCIDENTIAL OR CONSEQUENTIAL LOSS OR DAMAGES ARISING OUT OF ANY BREACH OF THIS EXPRESS LIM-

ITED WARRANTY, including but not limited to, (1) cost of parts, labor and service charges which are performed by others atany time or place, (2) damage to buildings or other property, (3) injuries or damages sustained by any persons whomever,(4) recovery of any direct or indirect costs such as shipping, installation labor charges, paint or painting, (5) other buildingmaterials. ALL CLAIMS UNDER THIS WARRANTY SHALL REQUIRE PROOF OF PURCHASE.

LIMITED WARRANTY

TELL CATALOG - TAB 7 - DOORS AND FRAMES

Documents