Top Banner
UTRAN Performance Measurement Message Flows UMTS Terrestrial Radio Access Network TED:PMMF A50016-G5000-F201-1-7618 ND-57172-704 (E)-01
120
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: tedpmmf

UTRAN

Performance Measurement Message Flows

UMTS Terrestrial Radio Access Network

TED:PMMF

A50016-G5000-F201-1-7618 ND-57172-704 (E)-01

Page 2: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01

Trademarks:

All designations used in this document can be trademarks, the use of which by third parties

for their own purposes could violate the rights of their owners.

Copyright (C) Siemens AG / NEC Corporation 2005.

Issued by: Siemens AG, Communications, Hofmannstraße 51, 81359 München, Germany and NEC Corporation, 7-1, Shiba 5-chome, Minato-ku, Tokyo, Japan

Technical modifications possible. Technical specifications and features are binding only insofar as they are specifically and expressly agreed upon in a written contract.

Page 3: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Preface

PR-11 Page

PREFACE

This document is prepared as a standard edition that may include descriptions not applying to your system.

This document shows basic and typical message sequence(s) per call processing. In the sequences, measurement types required for performance measurements are represented by “mtype n”, and radio channel names are accompanied with radio protocol messages (within parentheses).

The following sequences comprise this document:

• Location Registration

• MOC CS Related (Call Origination from CS)

• MTC CS Related (Call Termination to CS)

• CS Call Release

• MOC PS Related (Call Origination from PS)

• MTC PS Related (Call Termination to PS)

• PS Call Release

• Intra-Node B Handover

• Inter-Node B Handover

• Inter-RNC Handover

• Inter-Frequency Handover

• Relocation

• Inter-System Handover

• Inter-Node Connection (CS semi-normal sequence)

• Cell Update

• URA Update

• Common Measurement Report Reception

• Abbreviation List

Page 4: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01

DA 1

Reason for Update

Summary:

First edition

Details:

Issue History:

Chapter/Section Reason for Update

All First edition

Issue Number

Date of issue Reason for Update

1 5/2004 First edition

Page 5: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Contents

CL-1

CONTENTS TITLE PAGE

1. Location Registration.................................................... 1-1

2. MOC CS Related (Call Origination from CS) ........................................... 2-1

3. MTC CS Related (Call Termination to CS) ................................................3-1

4. CS Call Release................................................................ 4-1

4.1 UE-Initiated Call Release ................................................. 4-1

4.2 Network-Initiated Call Release........................................ 4-4

5. MOC PS Related (Call Origination from PS).............................................5-1

6. MTC PS Related (Call Termination to PS) ................................................6-1

7. PS Call Release................................................................ 7-1

7.1 UE-Initiated Call Release ................................................. 7-1

7.2 RNC-Initiated Call Release .............................................. 7-4

8. Intra-Node B Handover ................................................. 8-1

8.1 Radio Link Addition ......................................................... 8-1

8.2 Radio Link Deletion.......................................................... 8-4

8.3 Radio Link Addition - Failure .......................................... 8-6

9. Inter-Node B Handover ................................................. 9-1

9.1 Radio Link Addition ......................................................... 9-1

9.2 Radio Link Deletion.......................................................... 9-3

9.3 Radio Link Addition - Failure .......................................... 9-5

10. Inter-RNC Handover ..................................................... 10-1

10.1 Radio Link Addition ....................................................... 10-1

10.2 Radio Link Deletion........................................................ 10-5

11. Inter-Frequency Handover......................................... 11-1

12. Relocation ........................................................................ 12-1

Page 6: tedpmmf

A50016-G5000-E201-1-7618ND-57172-703 (E)-01 Contents

CL-22 Pages

TITLE PAGE

13. Inter-System Handover ............................................... 13-1

13.1 From UMTS to GSM ....................................................... 13-1

13.2 From UMTS to GPRS ..................................................... 13-4

13.3 From UMTS to GPRS(PS) .............................................. 13-6

13.4 From GSM to UMTS ....................................................... 13-8

14. Inter-Node Connection................................................ 14-1

14.1 NG Occurrence after Receiving RANAP: RAB Assignment Request at RAB Establishment ...... 14-1

14.2 Racing of NBAP_RLFailureInd Reception for Waiting for ALCAP Establish Confirm .................... 14-6

14.3 Racing of RRC_SigConnRelInd Reception after RRC_RRCConnSetupComp ................................. 14-8

14.4 NG Occurrence after Receiving ALCAP: Establish Confirm (Iub) at RAB Establishment ......... 14-11

14.5 RRC ConnectionSetupComplete Wait Time-out ....... 14-13

15. Cell Update....................................................................... 15-1

16. URA Update ..................................................................... 16-1

17. Common Measurement Report Reception ......... 17-1

18. Abbreviation List ........................................................... 18-1

Page 7: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01

SECTION 1Location Registration

Page 8: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Location Registration

1-1

1. Location Registration

Fig. 1-1 shows the location registration procedure for Circuit Switched (CS) and Packet Switched (PS) systems together.

The following measurement types are used in the sequence:

• mtype 1Number of attempted RRC connection establishments per establishment cause

• mtype 2Number of successful RRC connection establishments per establishment cause

• mtype 82Number of used codes per spreading factor

• mtype 102Number of attempted code requests per spreading factor

• mtype 103Number of attempted radio link establishments per SF

• mtype 104Number of successful radio link establishments per SF

• mtype 159Number of attempted RRC connection releases on DCCH per release cause

• mtype 161Number of attempted signaling connection establishments

• mtype 163Number of signaling connection releases

• mtype 186Number of Iu release commands per release cause

• mtype 221Number of successful code requests per spreading factor

Page 9: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Location Registration

1-2

Node B MSCUE RNC

Fig. 1-1 Location Registration (1/5)

mtype 2

SGSN

RRC: MEASUREMENT CONTROL(DCH: DCCH)

RRC: RRC CONNECTION SETUPCOMPLETE(DCH: DCCH)

RRC: RRC CONNECTION SETUP(FACH:CCCH)

RRC: INITIAL DIRECT TRANSFER[CS domain](MM: LOCATION UPDATING REQUEST(DCH:DCCH))

RRC: RRC CONNECTIONREQUEST(RACH: CCCH)

NBAP: RADIO LINKSETUP REQUEST

NBAP: RADIO LINKSETUP RESPONSE

mtype 82, 102, 103, 221

mtype 1

QAAL2 (Iub):ESTABLISH REQUEST

QAAL2 (Iub):ESTABLISH CONFIRM

NBAP: DEDICATED MEASUREMENTINITIATION REQUEST

NBAP: DEDICATED MEASUREMENTINITIATION RESPONSE

NBAP: RADIO LINKRESTORE INDICATION

mtype 104

Page 10: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Location Registration

1-3

Node B MSCUE RNC

Fig. 1-1 Location Registration (2/5)

SGSN

SCCP (CO): DT1[RANAP(DIRECT TRANSFER(AUTHENTICATION REQUEST))]

SCCP (CO): DT1[RANAP(DIRECT TRANSFER(AUTHENTICATION AND CIPHERING REQUEST))]

RRC: DOWNLINK DIRECT TRANSFER(GMM: AUTHENTICATION AND CIPHERING REQUEST(DCH: DCCH))

SCCP(CO): CR[RANAP(INITIAL UE MESSAGE(ATTACH REQUEST))]

mtype 161

SCCP(CO): CC[RANAP(none)]

SCCP(CO): CC[RANAP(none)]

RRC: DOWNLINK DIRECT TRANSFER(MM: AUTHENTICATION REQUEST(DCH: DCCH))

RRC: UPLINK DIRECT TRANSFER(MM: AUTHENTICATION RESPONSE(DCH: DCCH))

SCCP (CO): DT1[RANAP(DIRECT TRANSFER(AUTHENTICATION RESPONSE))]

mtype 161

RRC: INITIAL DIRECT TRANSFER[PS domain](GMM: ATTACH REQUEST(DCH:DCCH))

SCCP(CO): CR[RANAP(INITIAL UE MESSAGE(LOCATION UPDATING REQUEST))]

Page 11: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Location Registration

1-4

Fig. 1-1 Location Registration (3/5)

Node B MSCUE RNC SGSN

SCCP (CO): DT1[RANAP(SECURITY MODE COMMAND)]

SCCP (CO): DT1[RANAP(SECURITY MODE COMPLETE)]

RRC: SECURITY MODECOMMAND(DCH: DCCH)

RRC: SECURITY MODECOMPLETE(DCH: DCCH)

SCCP (CO): DT1[RANAP(SECURITY MODE COMPLETE)]

RRC: SECURITY MODECOMMAND(DCH: DCCH)

RRC: SECURITY MODECOMPLETE(DCH: DCCH)

RRC: UPLINK DIRECT TRANSFER(GMM: AUTHENTICATION AND CIPHERING RESPONSE(DCH: DCCH))

SCCP (CO): DT1[RANAP(COMMON ID)]

SCCP (CO): DT1[RANAP(COMMON ID)]

SCCP (CO): DT1[RANAP(DIRECT TRANSFER(AUTHENTICATION AND CIPHERING RESPONSE))]

SCCP (CO): DT1[RANAP(SECURITY MODE COMMAND)]

Page 12: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Location Registration

1-5

Fig. 1-1 Location Registration (4/5)

Node B MSCUE RNC SGSN

SCCP(CO): DT1[RANAP (IU RELEASE COMMAND)]

RRC: SIGNALING CONNECTION RELEASE(DCH: DCCH)

SCCP(CO): DT1[RANAP

RRC: DOWNLINK DIRECT TRANSFER(GMM: ATTACH ACCEPT(DCH: DCCH))

SCCP(CO): DT1[RANAP(IU RELEASE COMMAND)]

RRC: RRC CONNECTIONRELEASE(DCH: DCCH)

mtype 159

RRC: RRC CONNECTION RELEASECOMPLETE(DCH: DCCH)

mtype 186

mtype 186

RRC: UPLINK DIRECT TRANSFER(GMM: ATTACH COMPLETE(DCH: DCCH))

SCCP(CO): DT1[RANAP(DIRECT TRANSFER(ATTACH COMPLETE))]

SCCP(CO): DT1[RANAP(DIRECT TRANSFER(LOCATION UPDATING ACCEPT))]

RRC: DOWNLINK DIRECT TRANSFER(MM: LOCATION UPDATING ACCEPT(DCH: DCCH))

RRC: UPLINK DIRECT TRANSFER(MM: TMSI REALLOCATION COMPLETE(DCH: DCCH))

SCCP(CO): DT1[RANAP(DIRECT TRANSFER(TMSI REALLOCATION COMPLETE))]

(DIRECT TRANSFER(ATTACH ACCEPT))]

mtype 163

Page 13: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Location Registration

1-66 Pages

Fig. 1-1 Location Registration (5/5)

Node B MSCUE RNC SGSN

SCCP(CO): DT1[RANAP(IU RELEASE COMPLETE)]

NBAP: RADIO LINKDELETION REQUEST

NBAP: RADIO LINKDELETION RESPONSE

QAAL2(Iub):RELEASE REQUEST

QAAL2(Iub):RELEASE CONFIRM

SCCP(CO): RLSD

SCCP(CO): RLC

SCCP(CO): DT1[RANAP(IU RELEASE COMPLETE)]

SCCP(CO): RLSD

SCCP(CO): RLC

mtype 82

Page 14: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01

SECTION 2MOC CS Related

(Call Origination from CS)

Page 15: tedpmmf

A50016-G5000-F201-1-7618 MOC CS RelatedND-57172-704 (E)-01 (Call Origination from CS)

2-1

2. MOC CS Related (Call Origination from CS)

Fig. 2-1 shows a message sequence of the call origination from Circuit Switched (CS) network.

The following measurement types are used in the sequence:

• mtype 2Number of successful RRC connection establishments per establishment cause

• mtype 5Number of attempted RAB establishments per RAB type

• mtype 6Number of successful RAB establishments per RAB type

• mtype 82Number of used codes per spreading factor

• mtype 102Number of attempted code requests per spreading factor

• mtype 103Number of attempted radio link establishments per SF

• mtype 104Number of successful radio link establishments per SF

• mtype 115Number of CN initiated RAB releases per release cause

• mtype 161Number of attempted signaling connection establishments

• mtype 221Number of successful code requests per spreading factor

Page 16: tedpmmf

A50016-G5000-F201-1-7618 MOC CS RelatedND-57172-704 (E)-01 (Call Origination from CS)

2-2

QAAL2 (Iub):ESTABLISH REQUEST

QAAL2 (Iub):ESTABLISH CONFIRM

Node B MSCUE RNC

Fig. 2-1 Call Origination from CS (1/4)

RRC: RRC CONNECTION SETUPCOMPLETE (DCH:DCCH)

RRC: RRC CONNECTION SETUP(FACH:CCCH)

RRC: RRC CONNECTIONREQUEST (RACH: CCCH)

NBAP: DEDICATED MEASUREMENTINITIATION REQUEST

NBAP: DEDICATED MEASUREMENTINITIATION RESPONSE

mtype 2

RRC: MEASUREMENT CONTROL (DCH: DCCH)

NBAP: RADIO LINKRESTORE INDICATION

RRC: INITIAL DIRECT TRANSFER(MM: CM SERVICE REQUEST (DCH:DCCH))

NBAP: RADIO LINKSETUP REQUEST

NBAP: RADIO LINKSETUP RESPONSE

mtype 103

mtype 104

Page 17: tedpmmf

A50016-G5000-F201-1-7618 MOC CS RelatedND-57172-704 (E)-01 (Call Origination from CS)

2-3

Node B MSCUE RNC

Fig.2-1 Call Origination from CS (2/4)

SCCP (CO): DT1[RANAP(COMMON ID)]

SCCP (CO): DT1[RANAP(SECURITY MODE COMMAND)]

SCCP (CO): DT1[RANAP(SECURITY MODE COMPLETE)]

RRC: SECURITY MODECOMMAND(DCH: DCCH)

RRC: SECURITY MODECOMPLETE(DCH: DCCH)

SCCP (CO): DT1[RANAP(DIRECT TRANSFER(TMSI REALLOCATION COMMAND))]

RRC: DOWNLINK DIRECT TRANSFER(MM: TMSI REALLOCATION COMMAND(DCH: DCCH))

mtype 161

SCCP(CO): CC [RANAP (none)]

SCCP(CO): CR [RANAP (INITIAL UE MESSAGE(CM SERVICE REQUEST))]

SCCP (CO): DT1[RANAP(DIRECT TRANSFER(AUTHENTICATION REQUEST))]

RRC: UPLINK DIRECT TRANFER(MM: AUTHENTICATION RESPONSE(DCH: DCCH))

RRC: DOWNLINK DIRECT TRANFER(MM: AUTHENTICATION REQUEST(DCH: DCCH))

SCCP (CO): DT1[RANAP(DIRECT TRANSFER(AUTHENTICATION RESPONSE))]

Page 18: tedpmmf

A50016-G5000-F201-1-7618 MOC CS RelatedND-57172-704 (E)-01 (Call Origination from CS)

2-4

Node B MSCUE RNC

mtype82, 102, 221

NBAP: RADIO LINKRECONFIGURATION READY

QAAL2(Iub):ESTABLISH REQUEST

QAAL2(Iub):ESTABLISH CONFIRM

SCCP(CO): DT1[RANAP(RAB ASSIGNMENT REQUEST)]mtype 5, 115

QAAL2(Iu): ESTABLISH REQUEST

QAAL2(Iu): ESTABLISH CONFIRM

NBAP: RADIO LINKRECONFIGURATION PREPARE

NBAP: RADIO LINKRECONFIGURATION COMMIT

SCCP(CO): DT1[RANAP(DIRECT TRANSFER(SETUP))]

RRC: UPLINK DIRECT TRANSFER(CC: SETUP(DCH: DCCH))

SCCP(CO): DT1[RANAP(DIRECT TRANSFER(CALL PROCEEDING))]

RRC: DOWNLINK DIRECT TRANSFER(CC: CALL PROCEEDING(DCH: DCCH))

SCCP (CO): DT1[RANAP(DIRECT TRANSFER(TMSI REALLOCATION COMMPLETE))]

RRC: UPLINK DIRECT TRANSFER(MM: TMSI REALLOCATION COMPLETE(DCH: DCCH))

Fig.2-1 Call Origination from CS (3/4)

Page 19: tedpmmf

A50016-G5000-F201-1-7618 MOC CS RelatedND-57172-704 (E)-01 (Call Origination from CS)

2-55 Pages

Fig. 2-1 Call Origination from CS (4/4)

Node B MSCUE RNC

RRC: RADIO BEARER SETUPCOMPLETE(DCH: DCCH)

RRC: RADIO BEARERSETUP(DCH: DCCH)

SCCP(CO): DT1[RANAP(DIRECT TRANSFER(ALERTING))]

mtype 6,81SCCP(CO): DT1[RANAP(RAB ASSIGNMENT RESPONSE)]

RRC: DOWNLINK DIRECT TRANSFER(CC: ALERTING(DCH: DCCH))

SCCP(CO): DT1[RANAP(DIRECT TRANSFER(CONNECT))]

RRC: DOWNLINK DIRECT TRANSFER(CC: CONNECT(DCH: DCCH))

RRC: UPLINK DIRECT TRANSFER(CC: CONNECT ACKNOWLEDGE(DCH: DCCH))

SCCP(CO): DT1[RANAP(DIRECT TRANSFER(CONNECT ACKNOWLEDGE))]

RRC: MEASUREMENT CONTROL(DCH: DCCH)

Page 20: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01

SECTION 3MTC CS Related

(Call Termination to CS)

Page 21: tedpmmf

A50016-G5000-F201-1-7618 MTC CS RelatedND-57172-704 (E)-01 (Call Termination to CS)

3-1

3. MTC CS Related (Call Termination to CS)

Fig. 3-1 shows a message sequence of the call termination to Circuit Switched (CS) network.

The following measurement types are used in the sequence:

• mtype 1Number of attempted RRC connection establishments per establishment cause

• mtype 2Number of successful RRC connection establishments per establishment cause

• mtype 5Number of attempted RAB establishments per RAB type

• mtype 6Number of successful RAB establishments per RAB type

• mtype 82Number of used codes per spreading factor

• mtype 102Number of attempted code requests per spreading factor

• mtype 103Number of attempted radio link establishments per SF

• mtype 104Number of successful radio link establishments per SF

• mtype 111Number of CN originated pagings type 1 per paging cause (IDLE/PCH)

• mtype 115Number of CN initiated RAB releases per release cause

• mtype 161Number of attempted signaling connection establishments

• mtype 221Number of successful code requests per spreading factor

Page 22: tedpmmf

A50016-G5000-F201-1-7618 MTC CS RelatedND-57172-704 (E)-01 (Call Termination to CS)

3-2

NBAP: RADIO LINKSETUP REQUEST

NBAP: RADIO LINKSETUP RESPONSE

QAAL2 (Iub):ESTABLISH REQUEST

QAAL2 (Iub):ESTABLISH CONFIRM

Node B MSCUE RNC

Fig. 3-1 Call Termination to CS (1/4)

RRC: RRC CONNECTION SETUP(FACH:CCCH)

RRC: RRC CONNECTIONREQUEST (RACH: CCCH)

mtype 1

mtype82, 102, 103, 221

NBAP: DEDICATED MEASUREMENTINITIATION REQUEST

NBAP: DEDICATED MEASUREMENTINITIATION RESPONSE

SCCP(CL): UDT [RANAP (PAGING)]

RRC: RRC PAGING TYPE1 (PCH: PCCH)

The following is the same sequence as callorigination except for DIRECT TRANSFER (CC:)messages, basically.

mtype 111

NBAP: RADIO LINKRESTORE INDICATION

mtype 104

Page 23: tedpmmf

A50016-G5000-F201-1-7618 MTC CS RelatedND-57172-704 (E)-01 (Call Termination to CS)

3-3

Node B MSCUE RNC

Fig. 3-1 Call Termination to CS (2/4)

SCCP (CO): DT1[RANAP(COMMON ID)]

SCCP (CO): DT1[RANAP(SECURITY MODE COMMAND)]

SCCP (CO): DT1[RANAP(SECURITY MODE COMPLETE)]

RRC: SECURITY MODECOMMAND(DCH: DCCH)

RRC: SECURITY MODECOMPLETE(DCH: DCCH)

SCCP (CO): DT1[RANAP(DIRECT TRANSFER(AUTHENTICATION REQUEST))]

RRC: UPLINK DIRECT TRANFER(MM: AUTHENTICATION RESPONSE(DCH: DCCH))

RRC: DOWNLINK DIRECT TRANFER(MM: AUTHENTICATION REQUEST(DCH: DCCH))

SCCP (CO): DT1[RANAP(DIRECT TRANSFER(AUTHENTICATION RESPONSE))]

mtype 2

RRC: MEASUREMENT CONTROL(DCH: DCCH)

RRC: INITIAL DIRECT TRANSFER(MM: PAGING RESPONSE (DCH:DCCH))

mtype 161

SCCP(CO): CC [RANAP (none)]

SCCP(CO): CR [RANAP(INITIAL UE MESSAGE(PAGING RESPONSE))]

RRC: RRC CONNECTIONSETUPCOMPLETE(DCH:DCCH)

Page 24: tedpmmf

A50016-G5000-F201-1-7618 MTC CS RelatedND-57172-704 (E)-01 (Call Termination to CS)

3-4

RRC: RADIO BEARER SETUP(DCH: DCCH)

Node B MSCUE RNC

NBAP: RADIO LINKRECONFIGURATION COMMIT

SCCP(CO): DT1[RANAP(DIRECT TRANSFER(SETUP))]

RRC: DOWNLINK DIRECT TRANSFER(CC: SETUP(DCH: DCCH))

RRC: UPLINK DIRECT TRANSFER(CC: CALL CONFIRM(DCH: DCCH))

SCCP(CO): DT1[RANAP(DIRECT TRANSFER(CALL CONFIRM))]

SCCP(CO): DT1[RANAP(RAB ASSIGNMENT REQUEST)]mtype 5, 115

QAAL2(Iu): ESTABLISH REQUEST

NBAP: RADIO LINKRECONFIGURATION PREPARE

QAAL2(Iu): ESTABLISH RESPONSE

NBAP: RADIO LINKRECONFIGURATION READY

QAAL2(Iub):ESTABLISH REQUEST

QAAL2(Iub):ESTABLISH CONFIRM

mtype82, 102, 221

RRC: RADIO BEARER SETUPCOMPLETE(DCH: DCCH)

Fig. 3-1 Call Termination to CS (3/4)

Page 25: tedpmmf

A50016-G5000-F201-1-7618 MTC CS RelatedND-57172-704 (E)-01 (Call Termination to CS)

3-55 Pages

Fig. 3-1 Call Termination to CS (4/4)

Node B MSCUE RNC

SCCP(CO): DT1[RANAP(DIRECT TRANSFER(ALERTING))]

mtype 6,81SCCP(CO): DT1[RANAP(RAB ASSIGNMENT RESPONSE)]

SCCP(CO): DT1[RANAP(DIRECT TRANSFER(CONNECT))]

RRC: UPLINK DIRECT TRANSFER(CC: CONNECT(DCH: DCCH))

RRC: DOWNLINK DIRECT TRANSFER(CC: CONNECT ACKNOWLEDGE(DCH: DCCH))

SCCP(CO): DT1[RANAP(DIRECT TRANSFER(CONNECT ACKNOWLEDGE))]

RRC: MEASUREMENT CONTROL(DCH: DCCH)

RRC: UPLINK DIRECT TRANSFER(CC: ALERTING(DCH: DCCH))

Page 26: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01

SECTION 4CS Call Release

Page 27: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 CS Call Release

4-1

4. CS Call Release

4.1 UE-Initiated Call Release

Fig. 4-1 shows a message sequence of the UE-initiated call release.

The following measurement types are used in the sequence:

• mtype 31Number of successful outgoing hard handovers per handover type (Intra-Node B)Number of successful outgoing hard handovers per handover type (Inter-Node B/Intra-RNC)Number of successful outgoing hard handovers per handover type (Inter-RNC)Number of successful outgoing hard handovers per handover type (Inter-RAT)

• mtype 82Number of used codes per spreading factor

• mtype 115Number of CN initiated RAB releases per release cause

• mtype 159Number of attempted RRC connection releases on DCCH per release cause

• mtype 177Number of successful outgoing inter-system handovers per adjacent cell pair

• mtype 186Number of Iu release commands per release cause

Page 28: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 CS Call Release

4-2

Node B MSCUE RNC

SCCP(CO): DT1[RANAP(DIRECT TRANSFER(RELEASE))]

RRC: DOWNLINK DIRECT TRANFER(CC: RELEASE(DCH: DCCH))

RRC: UPLINK DIRECT TRANFER(CC: RELEASE COMPLETE(DCH: DCCH))

SCCP(CO): DT1[RANAP(DIRECT TRANSFER(RELEASE COMPLETE))]

SCCP(CO): DT1[RANAP(IU RELEASE COMMAND)]

RRC: UPLINK DIRECT TRANFER(CC: DISCONNECT(DCH: DCCH))

SCCP(CO): DT1[RANAP(DIRECT TRANSFER(DISCONNECT))]

mtype31, 115, 177, 186

RRC: RRC CONNECTIONRELEASE(DCH: DCCH)

NBAP: RADIO LINKDELETION REQUEST

mtype 159

RRC: RRC CONNECTION RELEASECOMPLETE(DCH: DCCH)

NBAP: RADIO LINKDELETION RESPONSE

mtype 82

QAAL2(Iub):RELEASE REQUEST

For DCCHQAAL2(Iub):RELEASE CONFIRM

QAAL2(Iub):RELEASE REQUEST

QAAL2(Iub):RELEASE CONFIRM

For DTCH

Fig. 4-1 UE-Initiated Call Release (1/2)

Page 29: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 CS Call Release

4-3

Fig. 4-1 UE-Initiated Call Release (2/2)

Node B MSCUE RNC

QAAL2(Iu): RELEASE REQUEST

QAAL2(Iu): RELEASE CONFIRM

SCCP(CO): DT1[RANAP(IU RELEASE COMPLETE)]

SCCP(CO): RLSD

SCCP(CO): RLC

Page 30: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 CS Call Release

4-4

4.2 Network-Initiated Call Release

Fig. 4-2 shows a message sequence of the network-initiated call release.

The following measurement types are used in the sequence:

• mtype 31Number of successful outgoing hard handovers per handover type (Intra-Node B)Number of successful outgoing hard handovers per handover type (Inter-Node B/Intra-RNC)Number of successful outgoing hard handovers per handover type (Inter-RNC)Number of successful outgoing hard handovers per handover type (Inter-RAT)

• mtype 82Number of used codes per spreading factor

• mtype 115Number of CN initiated RAB releases per release cause

• mtype 159Number of attempted RRC connection releases on DCCH per release cause

• mtype 177Number of successful outgoing inter-system handovers per adjacent cell pair

• mtype 186Number of Iu release commands per release cause

Page 31: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 CS Call Release

4-5

Node B MSCUE RNC

SCCP(CO): DT1[RANAP(DIRECT TRANSFER(RELEASE))]

RRC: UPLINK DIRECT TRANFER(CC: RELEASE)(DCH: DCCH))

RRC: UPLINK DIRECT TRANFER(CC: RELEASE COMPLETE(DCH: DCCH))

SCCP(CO): DT1[RANAP(DIRECT TRANSFER(RELEASE COMPLETE))]

SCCP(CO): DT1[RANAP(IU RELEASE COMMAND)]

RRC: DOWNLINK DIRECT TRANFER(CC: DISCONNECT(DCH: DCCH))

SCCP(CO): DT1[RANAP(DIRECT TRANSFER(DISCONNECT))]

mtype31, 115, 177, 186

RRC: RRC CONNECTIONRELEASE(DCH: DCCH)

NBAP: RADIO LINKDELETION REQUEST

mtype 159

RRC: RRC CONNECTION RELEASECOMPLETE(DCH: DCCH)

NBAP: RADIO LINKDELETION RESPONSE

mtype 82

QAAL2(Iub):RELEASE REQUEST

For DCCHQAAL2(Iub):RELEASE CONFIRM

QAAL2(Iub):RELEASE REQUEST

QAAL2(Iub):RELEASE CONFIRM

For DTCH

Fig. 4-2 Network-Initiated Call Release (1/2)

Page 32: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 CS Call Release

4-66 Pages

Fig. 4-2 Network-Initiated Call Release (2/2)

Node B MSCUE RNC

QAAL2(Iu): RELEASE REQUEST

QAAL2(Iu): RELEASE CONFIRM

SCCP(CO): DT1[RANAP(IU RELEASE COMPLETE)]

SCCP(CO): RLSD

SCCP(CO): RLC

Page 33: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01

SECTION 5MOC PS Related

(Call Origination from PS)

Page 34: tedpmmf

A50016-G5000-F201-1-7618 MOC PS RelatedND-57172-704 (E)-01 (Call Origination from PS)

5-1

5. MOC PS Related (Call Origination from PS)

Fig. 5-1 shows a message sequence of the call origination from Packet Switched (PS) network.

The following measurement types are used in the sequence:

• mtype 1Number of attempted RRC connection establishments per establishment cause

• mtype 2Number of successful RRC connection establishments per establishment cause

• mtype 5Number of attempted RAB establishments per RAB type

• mtype 6Number of successful RAB establishments per RAB type

• mtype 82Number of used codes per spreading factor

• mtype 102Number of attempted code requests per spreading factor

• mtype 103Number of attempted radio link establishments per SF

• mtype 104Number of successful radio link establishments per SF

• mtype 161Number of attempted signaling connection establishments

• mtype 221Number of successful code requests per spreading factor

Page 35: tedpmmf

A50016-G5000-F201-1-7618 MOC PS RelatedND-57172-704 (E)-01 (Call Origination from PS)

5-2

NBAP: RADIO LINKSETUP REQUEST

NBAP: RADIO LINKSETUP RESPONSE

QAAL2 (Iub):ESTABLISH REQUEST

QAAL2 (Iub):ESTABLISH CONFIRM

Node BUE RNC

Fig. 5-1 Call Origination from PS (1/3)

RRC: RRC CONNECTION SETUPCOMPLETE (DCH:DCCH)

RRC: RRC CONNECTIONSETUP (FACH:CCCH)

RRC: RRC CONNECTIONREQUEST (RACH: CCCH)

mtype 1

mtype82, 102, 103, 221

NBAP: DEDICATED MEASUREMENTINITIATION RESPONSE

mtype 2

NBAP: RADIO LINKRESTORE INDICATION

SGSN

RRC: MEASUREMENTCONTROL (DCH: DCCH)

NBAP: DEDICATED MEASUREMENTINITIATION REQUEST

mtype 104

Page 36: tedpmmf

A50016-G5000-F201-1-7618 MOC PS RelatedND-57172-704 (E)-01 (Call Origination from PS)

5-3

Node BUE RNC

Fig. 5-1 Call Origination from PS (2/3)

SGSN

SCCP (CO): DT1[RANAP(DIRECT TRANSFER(AUTHENTICATION AND CIPHERING REQUEST))]

SCCP (CO): DT1[RANAP(COMMON ID)]

SCCP (CO): DT1[RANAP(SECURITY MODE COMMAND)]

SCCP (CO): DT1[RANAP(SECURITY MODE COMPLETE)]

RRC: SECURITY MODECOMMAND(DCH: DCCH)

RRC: SECURITY MODECOMPLETE(DCH: DCCH)

SCCP(CO): CR [RANAP (INITIAL UE MESSAGE(SERVICE REQUEST(TYPE=SIGNALING)))]

mtype 161

SCCP(CO): CC[RANAP(none)]

RRC: INITIAL DIRECT TRANSFER(GMM: SERVICE REQUEST(TYPE=SIGNALING)(DCH:DCCH))

RRC: DOWNLINK DIRECT TRANFER(GMM: AUTHENTICATION AND CIPHERING REQUEST(DCH: DCCH))

RRC: UPLINK DIRECT TRANFER(GMM: AUTHENTICATION AND CIPHERING RESPONSE(DCH: DCCH))

SCCP (CO): DT1[RANAP(DIRECT TRANSFER(AUTHENTICATION AND CIPHERING RESPONSE))]

Page 37: tedpmmf

A50016-G5000-F201-1-7618 MOC PS RelatedND-57172-704 (E)-01 (Call Origination from PS)

5-44 Pages

Fig. 5-1 Call Origination from PS (3/3)

Node BUE RNC SGSN

mtype 82

NBAP: RADIO LINKRECONFIGURATION PREPARE

QAAL2(Iub):ESTABLISH REQUEST

SCCP(CO): DT1[RANAP(DIRECT TRANSFER)ACTIVATE PDP CONTEXT ACCEPT))]

QAAL2(Iub):ESTABLISH CONFIRM

SCCP(CO): DT1[RANAP(DIRECT TRANSFER(ACTIVATE PDP CONTEXT REQUEST))]

SCCP(CO): DT1[RANAP(RAB ASSIGNMENT REQUEST)]

mtype 5

mtype 102,221,82

NBAP: RADIO LINKRECONFIGURATION READY

RRC: RADIO BEARER SETUPCOMPLETE(DCH: DCCH)

SCCP(CO): DT1[RANAP(RAB ASSIGNMENT RESPONSE)]

mtype 6, 81

RRC: MEASUREMENT CONTROL(DCH: DCCH)For Traffic Volume

NBAP: RADIO LINKRECONFIGURATION COMMIT

RRC: UPLINK DIRECT TRANFER(SM: ACTIVATE PDP CONTEXT REQUEST(DCH: DCCH))

RRC: RADIO BEARER SETUP(DCH: DCCH)

RRC: DOWNLINK DIRECT TRANSFER(SM: ACTIVATE PDP CONTEXT ACCEPT(DCH: DCCH))

Page 38: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01

SECTION 6MTC PS Related

(Call Termination to PS)

Page 39: tedpmmf

A50016-G5000-F201-1-7618 MTC PS RelatedND-57172-704 (E)-01 (Call Termination to PS)

6-1

6. MTC PS Related (Call Termination to PS)

Fig. 6-1 shows a message sequence of the call termination to Packet Switched (PS) network.

The following measurement types are used in the sequence:

• mtype 1Number of attempted RRC connection establishments per establishment cause

• mtype 2Number of successful RRC connection establishments per establishment cause

• mtype 5Number of attempted RAB establishments per RAB type

• mtype 6Number of successful RAB establishments per RAB type

• mtype 82Number of used codes per spreading factor

• mtype 102Number of attempted code requests per spreading factor

• mtype 103Number of attempted radio link establishments per SF

• mtype 104Number of successful radio link establishments per SF

• mtype 111Number of CN originated pagings type 1 per paging cause (IDLE/PCH)

• mtype 161Number of attempted signaling connection establishments

• mtype 221Number of successful code requests per spreading factor

Page 40: tedpmmf

A50016-G5000-F201-1-7618 MTC PS RelatedND-57172-704 (E)-01 (Call Termination to PS)

6-2

NBAP: RADIO LINKSETUP REQUEST

NBAP: RADIO LINKSETUP RESPONSE

QAAL2 (Iub):ESTABLISH REQUEST

QAAL2 (Iub):ESTABLISH CONFIRM

Node BUE RNC

Fig. 6-1 Call Termination to PS (1/4)

RRC: RRC CONNECTION SETUPCOMPLETE (DCH:DCCH)

RRC: RRC CONNECTIONSETUP (FACH:CCCH)

RRC: RRC CONNECTIONREQUEST (RACH: CCCH)

mtype 1

mtype82, 102, 103, 221

NBAP: DEDICATED MEASUREMENTINITIATION REQUEST

NBAP: DEDICATED MEASUREMENTINITIATION RESPONSE

mtype 2

NBAP: RADIO LINKRESTORE INDICATION

SGSN

RRC: MEASUREMENT CONTROL (DCH: DCCH)

The following is the same sequence ascall origination except the DIRECTTRANSFER(CC:) messages, basically.

mtype 111RRC: PAGING TYPE1 (PCH: PCCH)

SCCP(CL): UDT[RANAP(PAGING)]

mtype 104

Page 41: tedpmmf

A50016-G5000-F201-1-7618 MTC PS RelatedND-57172-704 (E)-01 (Call Termination to PS)

6-3

Node BUE RNC

Fig. 6-1 Call Termination to PS (2/4)

SGSN

SCCP (CO): DT1[RANAP(DIRECT TRANSFER(AUTHENTICATION AND CIPHERING RESPONSE))]

SCCP (CO): DT1[RANAP(DIRECT TRANSFER(AUTHENTICATION AND CIPHERING REQUEST))]

SCCP (CO): DT1[RANAP(COMMON ID)]

SCCP (CO): DT1[RANAP(SECURITY MODE COMMAND)]

SCCP (CO): DT1[RANAP(SECURITY MODE COMPLETE)]

RRC: SECURITY MODECOMMAND(DCH: DCCH)

RRC: SECURITY MODECOMPLETE(DCH: DCCH)

SCCP(CO): CR [RANAP (INITIAL UE MESSAGE(SERVICE REQUEST(TYPE=SIGNALING)))]

mtype 161

SCCP(CO): CC [RANAP (none)]

RRC: INITIAL DIRECT TRANSFER (GMM: SERVICE REQUEST(TYPE=SIGNALING)(DCH:DCCH))

RRC: DOWNLINK DIRECT TRANFER(GMM: AUTHENTICATION AND CIPHERING REQUEST(DCH: DCCH))

RRC: UPLINK DIRECT TRANFER(GMM: AUTHENTICATION AND CIPHERING RESPONSE(DCH: DCCH))

Page 42: tedpmmf

A50016-G5000-F201-1-7618 MTC PS RelatedND-57172-704 (E)-01 (Call Termination to PS)

6-4

Node BUE RNC SGSN

mtype82

NBAP: RADIO LINKRECONFIGURATION PREPARE

QAAL2(Iub):ESTABLISH REQUEST

QAAL2(Iub):ESTABLISH CONFIRM

SCCP(CO): DT1[RANAP(DIRECT TRANSFER(ACTIVATE PDP CONTEXT REQUEST))]

SCCP(CO): DT1[RANAP(RAB ASSIGNMENT REQUEST)]

RRC: RADIO BEARER SETUP(DCH: DCCH)

mtype 5

mtype 102,221,82

NBAP: RADIO LINKRECONFIGURATION PREPARE

RRC: RADIO BEARER SETUPCOMPLETE(DCH: DCCH)

NBAP: RADIO LINKRECONFIGURATION COMMIT

SCCP(CO): DT1[RANAP(DIRECT TRANSFER(REQUEST PDP CONTEXT ACTIVATION))]

RRC: DOWNLINK DIRECT TRANFER(SM: REQUEST PDP CONTEXT ACTIVATION(DCH: DCCH))

RRC: UPLINK DIRECT TRANFER(SM: ACTIVATE PDP CONTEXT REQUEST(DCH: DCCH))

Fig. 6-1 Call Termination to PS (3/4)

Page 43: tedpmmf

A50016-G5000-F201-1-7618 MTC PS RelatedND-57172-704 (E)-01 (Call Termination to PS)

6-55 Pages

Fig. 6-1 Call Termination to PS (4/4)

Node BUE RNC SGSN

SCCP(CO): DT1[RANAP(DIRECT TRANSFER)ACTIVATE PDP CONTEXT ACCEPT))]

SCCP(CO): DT1[RANAP(RAB ASSIGNMENT RESPONSE)]

mtype 6, 81

RRC: MEASUREMENT CONTROL(DCH: DCCH)For Traffic Volume

RRC: DOWNLINK DIRECT TRANSFER(SM: ACTIVE PDP CONTEXT ACCEPT(DCH: DCCH))

Page 44: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01

SECTION 7PS Call Release

Page 45: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 PS Call Release

7-1

7. PS Call Release

7.1 UE-Initiated Call Release

Fig. 7-1 shows a message sequence (on Cell_DCH) of the UE-initiated call release.

The following measurement types are used in the sequence:

• mtype 31Number of successful outgoing hard handovers per handover type (Intra-Node B)Number of successful outgoing hard handovers per handover type (Inter-Node B/Intra-RNC)Number of successful outgoing hard handovers per handover type (Inter-RNC)Number of successful outgoing hard handovers per handover type (Inter-RAT)

• mtype 82Number of used codes per spreading factor

• mtype 115Number of CN initiated RAB releases per release cause

• mtype 159Number of attempted RRC connection releases on DCCH per release cause

• mtype 177Number of successful outgoing inter-system handovers per adjacent cell pair

• mtype 186Number of Iu release commands per release cause

Page 46: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 PS Call Release

7-2

NBAP: RADIO LINKDELETION RESPONSE

Node BUE RNC SGSN

mtype 82

NBAP: RADIO LINKDELETION REQUEST

SCCP(CO): DT1[RANAP(DIRECT TRANSFER(DEACTIVATE PDP CONTEXT REQUEST))]

SCCP(CO): DT1[RANAP(IU RELEASE COMMAND)]mtype 31, 115,

177, 186

mtype 159

SCCP(CO): DT1[RANAP(DIRECT TRANSFER(DEACTIVATE PDP CONTEXT ACCEPT))]

RRC: RRC CONNECTIONRELEASE(DCH: DCCH)

RRC: RRC CONNECTION RELEASECOMPLETE(DCH: DCCH)

RRC: UPLINK DIRECT TRANFER(SM: DEACTIVATE PDP CONTEXT REQUEST(DCH: DCCH))

RRC: DOWNLINK DIRECT TRANFER(SM: DEACTIVATE PDP CONTEXT ACCEPT(DCH: DCCH))

Fig. 7-1 UE-Initiated Call Release (1/2)

Page 47: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 PS Call Release

7-3

Fig. 7-1 UE-Initiated Call Release (2/2)

Node BUE RNC SGSN

QAAL2(Iub):RELEASE REQUEST

SCCP(CO): RLSD

QAAL2(Iub):RELEASE CONFIRM

SCCP(CO): DT1[RANAP(IU RELEASE COMPLETE)]

QAAL2(Iub):RELEASE REQUEST

QAAL2(Iub):RELEASE CONFIRM

SCCP(CO): RLC

For DCCH

For DTCH

Page 48: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 PS Call Release

7-4

7.2 RNC-Initiated Call Release

Fig. 7-2 shows a message sequence (on Cell_DCH) of the RNC-initiated call release.

The following measurement types are used in the sequence:

• mtype 31Number of successful outgoing hard handovers per handover type (Intra-Node B)Number of successful outgoing hard handovers per handover type (Inter-Node B/Intra-RNC)Number of successful outgoing hard handovers per handover type (Inter-RNC)Number of successful outgoing hard handovers per handover type (Inter-RAT)

• mtype 112Number of UTRAN originated pagings type 1 in CELL_PCH per paging cause

• mtype 114Number of UTRAN initiated RAB releases per release cause

• mtype 115Number of CN initiated RAB releases per release cause

• mtype 160Number of attempted RRC connection releases on CCCH per release cause

• mtype 167Number of cell updates per update cause

• mtype 168Number of incoming cell updates per update cause per adjacent cell pair

• mtype 177Number of successful outgoing inter-system handovers per adjacent cell pair

• mtype 185Number of Iu release requests per release cause

• mtype 186Number of Iu release commands per release cause

Page 49: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 PS Call Release

7-55 Pages

Fig. 7-2 RNC-Initiated Call Release

Node BUE RNC SGSN

mtype 112

mtype167, 168

SCCP(CO): DT1[RANAP(IU RELEASE COMMAND)]

RRC: RRC CONNECTIONRELEASE (FACH: CCCH)

mtype 160

SCCP(CO): RLSD

SCCP(CO): DT1[RANAP(IU RELEASE COMPLETE)]

SCCP(CO): RLC

SCCP(CO): DT1[RANAP(IU RELEASE REQUEST)]

RRC: PAGING TYPE 1(PCH: PCCH)

RRC: CELL UPDATE(RACH: CCCH)

mtype 31, 115,177, 186

mtype 114

Page 50: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01

SECTION 8Intra-Node B Handover

Page 51: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Intra-Node B Handover

8-1

8. Intra-Node B Handover

8.1 Radio Link Addition

Fig. 8-1 shows a message sequence of the radio link addition in the intra-Node B handover procedure.

The following measurement types are used in the sequence:

• mtype 17Number of drifting UEs (adjacent RNC)

• mtype 34Number of attempted intra Node B branch additions per addition cause

• mtype 36Number of successful intra Node B branch additions per addition cause

• mtype 46Number of attempted intra RNC branch additions per addition cause

• mtype 48Number of successful intra RNC branch additions per addition cause

• mtype 82Number of used codes per spreading factor

• mtype 102Number of attempted code requests per spreading factor

• mtype 103Number of attempted radio link establishments per SF

• mtype 104Number of successful radio link establishments per SF

• mtype 170Number of attempted outgoing radio link addition movements per adjacent cell

• mtype 171Number of successful outgoing radio link addition movements

Page 52: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Intra-Node B Handover

8-2

per adjacent cell

• mtype 205Number of UEs per active link set size

• mtype 221Number of successful code requests per spreading factor

Page 53: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Intra-Node B Handover

8-3

Fig. 8-1 Radio Link Addition

RRC: MEASUREMENT CONTROL(DCH: DCCH)

RRC: ACTIVE SET UPDATE(DCH: DCCH)

NBAP: RADIO LINKADDITION RESPONSE

NBAP: RADIO LINKADDITION REQUEST

Node BUE RNC

mtype46, 34, 170

RRC: ACTIVE SET UPDATECOMPLETE(DCH: DCCH) mtype

17, 36, 48, 171

mtype82, 102, 103, 221

RRC: MEASUREMENT REPORT(DCH: DCCH)

mtype 205

mtype 104

Page 54: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Intra-Node B Handover

8-4

8.2 Radio Link Deletion

Fig. 8-2 shows a message sequence of the radio link deletion in the intra-Node B handover procedure.

The following measurement types are used in the sequence:

• mtype 17Number of drifting UEs (adjacent RNC)

• mtype 38Number of attempted branch deletions per deletion cause

• mtype 50Number of successful branch deletions per deletion cause

• mtype 82Number of used codes per spreading factor

• mtype 205Number of UEs per active link set size

Page 55: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Intra-Node B Handover

8-5

Fig. 8-2 Radio Link Deletion

NBAP: RADIO LINKDELETION RESPONSE

RRC: MEASUREMENT CONTROL(DCH: DCCH)

RRC: ACTIVE SET UPDATE(DCH: DCCH)

NBAP: RADIO LINKDELETION REQUEST

RRC: MEASUREMENT REPORT(DCH: DCCH)

Node BUE RNC

mtype 38

RRC: ACTIVE SET UPDATECOMPLETE(DCH: DCCH)

mtype 82

mtype 17, 50

mtype 205

Page 56: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Intra-Node B Handover

8-6

8.3 Radio Link Addition - Failure

Fig. 8-3 shows a failed message sequence of the radio link addition -failure in the intra-Node B handover procedure.

The following measurement types are used in the sequence:

• mtype 34Number of attempted intra Node B branch additions per addition cause

• mtype 35Number of unsuccessful intra Node B branch additions per failure cause

• mtype 46Number of attempted intra RNC branch additions per addition cause

• mtype 47Number of unsuccessful intra RNC branch additions per failure cause

• mtype 82Number of used codes per spreading factor

• mtype 102Number of attempted code requests per spreading factor

• mtype 103Number of attempted radio link establishments per SF

• mtype 104Number of successful radio link establishments per SF

• mtype 159Number of attempted RRC connection releases on DCCH per release cause

• mtype 170Number of attempted outgoing radio link addition movements per adjacent cell

• mtype 172Number of failed outgoing radio link addition movements per failure cause per adjacent cell

Page 57: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Intra-Node B Handover

8-7

• mtype 185Number of Iu release requests per release cause

• mtype 186Number of Iu release commands per release cause

• mtype 221Number of successful code requests per spreading factor

Page 58: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Intra-Node B Handover

8-8

NBAP: RADIO LINKADDITION RESPONSE

NBAP: RADIO LINKADDITION REQUEST

RRC: MEASUREMENT REPORT(DCH: DCCH)

Node BUE RNC

RRC: ACTIVE SET UPDATEFAILURE(DCH: DCCH) mtype

35, 47, 172

SGSN

RRC: CONNECTION RELEASE (DCH:DCCH)

RRC: CONNECTION COMPLETE (DCH:DCCH)

mtype 159

NBAP: RADIO LINKDELETION REQUEST

mtype 82

CS, UDI

mtype 185

mtype 186, 81

SCCP (CO): DT1[RANAP(IU RELEASE REQUEST)]

SCCP (CO): DT1[RANAP(IU RELEASE COMMAND)]

PS

mtype 185

mtype 186, 81

mtype34, 46, 170

mtype82, 102, 103, 221

NBAP: RADIO LINKDELETION RESPONSE

mtype 82(For 2nd RL Deletion)

MSC

SCCP (CO): DT1[RANAP(IU RELEASE REQUEST)]

SCCP (CO): DT1[RANAP(IU RELEASE COMMAND)]

RRC: ACTIVE SET UPDATE(DCH: DCCH)

Fig. 8-3 Radio Link Addition - Failure (1/2)

mtype 104

Page 59: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Intra-Node B Handover

8-99 Pages

Fig. 8-3 Radio Link Addition - Failure (2/2)

Node BUE RNC SGSN MSC

QAAL2 (Iu): RELEASE REQUEST

QAAL2 (Iu): RELEASE CONFIRM

SCCP (CO): DT1[RANAP(IU RELEASE COMPLETE)]

SCCP (CO): RLSD

SCCP (CO): RLC

SCCP (CO): DT1[RANAP(IU RELEASE COMPLETE)]

SCCP (CO): RLSD

SCCP (CO): RLC

PS

CS, UDI

QAAL2 (Iub):RELEASE REQUEST

QAAL2 (Iub):RELEASE CONFIRM

For DCCH

QAAL2 (Iub):RELEASE REQUEST

QAAL2 (Iub):RELEASE CONFIRM

For DTCH

Page 60: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01

SECTION 9Inter-Node B Handover

Page 61: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Inter-Node B Handover

9-1

9. Inter-Node B Handover

9.1 Radio Link Addition

Fig. 9-1 shows a message sequence of the radio link addition in the inter-Node B handover procedure.

The following measurement types are used in the sequence:

• mtype 17Number of drifting UEs (adjacent RNC)

• mtype 46Number of attempted intra RNC branch additions per addition cause

• mtype 48Number of successful intra RNC branch additions per addition cause

• mtype 82Number of used codes per spreading factor

• mtype 102Number of attempted code requests per spreading factor

• mtype 103Number of attempted radio link establishments per SF

• mtype 104Number of successful radio link establishments per SF

• mtype 170Number of attempted outgoing radio link addition movements per adjacent cell

• mtype 171Number of successful outgoing radio link addition movements per adjacent cell

• mtype 221Number of successful code requests per spreading factor

Page 62: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Inter-Node B Handover

9-2

Fig. 9-1 Radio Link Addition

NBAP: RADIO LINKRESTORE INDICATION

QAAL2(Iub):ESTABLISH CONFIRM

QAAL2(Iub):ESTABLISH REQUEST

NBAP: RADIO LINKSETUP RESPONSE

NBAP: RADIO LINKSETUP REQUEST

RRC: MEASUREMENT REPORT(DCH: DCCH)

Node BUE RNC

mtype46, 170

RRC: ACTIVE SET UPDATECOMPLETE(DCH: DCCH) mtype

17, 48, 171

NBAP: DEDICATED MEASUREMENTINITIATION REQUEST

NBAP: DEDICATED MEASUREMENTINITIATION RESPONSE

mtype82, 102, 103, 221

RRC: ACTIVE SET UPDATE(DCH: DCCH)

RRC: MEASUREMENT CONTROL(DCH: DCCH)

mtype 104

Page 63: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Inter-Node B Handover

9-3

9.2 Radio Link Deletion

Fig. 9-2 shows a message sequence of the radio link deletion in the inter-Node B handover procedure.

The following measurement types are used in the sequence:

• mtype 17Number of drifting UEs (adjacent RNC)

• mtype 38Number of attempted branch deletions per deletion cause

• mtype 50Number of successful branch deletions per deletion cause

• mtype 82Number of used codes per spreading factor

Page 64: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Inter-Node B Handover

9-4

Fig. 9-2 Radio Link Deletion

RRC: MEASUREMENT CONTROL(DCH: DCCH)

RRC: ACTIVE SET UPDATE(DCH: DCCH)

QAAL2(Iub):ESTABLISH CONFIRM

QAAL2(Iub):ESTABLISH REQUEST

NBAP: RADIO LINKDELETION RESPONSE

NBAP: RADIO LINKDELETION REQUEST

RRC: MEASUREMENT REPORT(DCH: DCCH)

Node BUE RNC

mtype 38

RRC: ACTIVE SET UPDATECOMPLETE(DCH: DCCH)

mtype 82

mtype 17, 50

Page 65: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Inter-Node B Handover

9-5

9.3 Radio Link Addition - Failure

Fig. 9-3 shows a failed message sequence of the radio link addition -failure in the inter-Node B handover procedure.

The following measurement types are used in the sequence:

• mtype 46Number of attempted intra RNC branch additions per addition cause

• mtype 47Number of unsuccessful intra RNC branch additions per failure cause

• mtype 82Number of used codes per spreading factor

• mtype 102Number of attempted code requests per spreading factor

• mtype 103Number of attempted radio link establishments per SF

• mtype 104Number of successful radio link establishments per SF

• mtype 159Number of attempted RRC connection releases on DCCH per release cause

• mtype 170Number of attempted outgoing radio link addition movements per adjacent cell

• mtype 172Number of failed outgoing radio link addition movements per failure cause per adjacent cell

• mtype 185Number of Iu release requests per release cause

• mtype 186Number of Iu release commands per release cause

• mtype 221Number of successful code requests per spreading factor

Page 66: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Inter-Node B Handover

9-6

Fig. 9-3 Radio Link Addition - Failure (1/2)

UE RNC

mtype46, 170

mtype 47 (172)

Node B112

SCCP (CO): DT1[RANAP(IU RELEASE REQUEST)]

SCCP (CO): DT1[RANAP(IU RELEASE COMMAND)]

CS, UDI

mtype 185

mtype186(81)

SCCP (CO): DT1[RANAP(IU RELEASE REQUEST)]

SCCP (CO): DT1[RANAP(IU RELEASE COMMAND)]

PS

mtype 185

mtype186(81)

QAAL2(Iub):

QAAL2(Iub):

mtype82, 102, 103, 221

SGSN MSCNode B111

mtype 104

RRC: MEASUREMENT REPORT(DCH: DCCH)

NBAP: RADIO LINKSETUP REQUEST

NBAP: RADIO LINKSETUP RESPONSE

ESTABLISH REQUEST

ESTABLISH CONFIRM

NBAP: DEDICATED MEASUREMENTINITIATION REQUEST

NBAP: DEDICATED MEASUREMENTINITIATION RESPONSE

RRC: ACTIVE SET UPDATE(DCH: DCCH)

RRC: ACTIVE SET UPDATEFAILURE(DCH: DCCH)

NBAP: RADIO LINKRESTORE INDICATION

Page 67: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Inter-Node B Handover

9-77 Pages

Fig. 9-3 Radio Link Addition - Failure (2/2)

UE RNCNode B111

QAAL2 (Iu): RELEASE REQUEST

QAAL2 (Iu): RELEASE CONFIRM

SCCP (CO): DT1[RANAP(IU RELEASE COMPLETE)]

SCCP (CO): RLSD

SCCP (CO): RLC

SCCP (CO): DT1[RANAP(IU RELEASE COMPLETE)]

SCCP (CO): RLSD

SCCP (CO): RLC

PS

QAAL2(Iub):RELEASE REQUEST

QAAL2(Iub):RELEASE REQUEST

QAAL2(Iub):RELEASE CONFIRM

QAAL2(Iub):RELEASE CONFIRM

SGSN MSC

CS, UDI

mtype 159

RRC: RRC CONNECTIONRELEASE (DCH: DCCH)

RRC: RRC CONNECTIONCOMPLETE (DCH: DCCH)

NBAP: RADIO LINKDELETION REQUEST

NBAP: RADIO LINKDELETION REQUEST

NBAP: RADIO LINKDELETION RESPONSE

NBAP: RADIO LINKDELETION RESPONSE

mtype 82

mtype 82

Node B112

Page 68: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01

SECTION 10Inter-RNC Handover

Page 69: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Inter-RNC Handover

10-1

10. Inter-RNC Handover

10.1 Radio Link Addition

Fig. 10-1 shows a message sequence of the radio link addition in the inter-RNC handover procedure.

• mtype 17Number of drifting UEs (adjacent RNC)

• mtype 46Number of attempted intra RNC branch additions per addition cause

• mtype 48Number of successful intra RNC branch additions per addition cause

• mtype 58Number of attempted inter RNC branch additions per addition cause

• mtype 59Number of successful inter RNC branch additions per addition cause

• mtype 82Number of used codes per spreading factor

• mtype 102Number of attempted code requests per spreading factor

• mtype 103Number of attempted radio link establishments per SF

• mtype 104Number of successful radio link establishments per SF

• mtype 170Number of attempted outgoing radio link addition movements per adjacent cell

• mtype 171Number of successful outgoing radio link addition movements per adjacent cell

Page 70: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Inter-RNC Handover

10-2

• mtype 221Number of successful code requests per spreading factor

Page 71: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Inter-RNC Handover

10-3

SCCP(CO): CR[RNSAP(none)]

Node B111

UE RNC11 RNC12

SCCP(CO): CR[RNSAP(none)]

Node B112

SCCP(CO): DT1[RNSAP(RADIO LINK SETUP REQUEST)]

NBAP: RADIO LINKSETUP RESPONSE

NBAP: RADIO LINKSETUP REQUEST

QAAL2(Iub):ESTABLISH REQUEST

QAAL2(Iur):ESTABLISH CONFIRM

QAAL2(Iur):ESTABLISH REQUEST

QAAL2(Iub):ESTABLISH CONFIRM

For Outer LoopPower Control

mtype82, 102, 103, 221

RRC: MEASUREMENT REPORT(DCH: DCCH)

SCCP(CO): DT1[RNSAP(RADIO LINK SETUP RESPONSE)]

SCCP(CO): DT1[RNSAP(DEDICATED MEASUREMENT INITIATION REQUEST)]

NBAP: DEDICATED MEASUREMENTINITIATION REQUEST

NBAP: DEDICATED MEASUREMENTINITIATION RESPONSE

Fig. 10-1 Radio Link Addition (1/2)

mtype46, 58, 170

mtype 104

Page 72: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Inter-RNC Handover

10-4

Fig. 10-1 Radio Link Addition (2/2)

Node B111

UE RNC11 RNC12Node B112

RRC: MEASUREMENT CONTROL(DCH: DCCH)

RRC: ACTIVE SET UPDATECOMPLETE(DCH: DCCH)

NBAP: RADIO LINKRESTORE INDICATION

RRC: ACTIVE SET UPDATE(DCH: DCCH)

SCCP(CO): DT1[RNSAP(RADIO LINK RESTORE INDICATION)]

SCCP(CO): DT1[RNSAP

mtype17, 48, 59, 171

(DEDICATED MEASUREMENT INITIATION RESPONSE)]

Page 73: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Inter-RNC Handover

10-5

10.2 Radio Link Deletion

Fig. 10-2 shows a message sequence of the radio link deletion in the inter-RNC handover procedure.

The following measurement types are used in the sequence:

• mtype 17Number of drifting UEs (adjacent RNC)

• mtype 38Number of attempted branch deletions per deletion cause

• mtype 50Number of successful branch deletions per deletion cause

• mtype 82Number of used codes per spreading factor

Page 74: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Inter-RNC Handover

10-66 Pages

Fig. 10-2 Radio Link Deletion

RRC: MEASUREMENT CONTROL(DCH: DCCH)

RRC: MEASUREMENT REPORT(DCH: DCCH)

Node B111

UE RNC11

NBAP: RADIO LINKDELETION RESPONSE

NBAP: RADIO LINKDELETION REQUEST

QAAL2(Iub):RELEASE REQUEST

QAAL2(Iub): RELEASE CONFIRM

QAAL2(Iub): RELEASE REQUEST

QAAL2(Iub):RELEASE CONFIRM

RRC: ACTIVE SET UPDATECOMPLETE(DCH: DCCH)

SCCP(CO): RLSD

SCCP(CO): RLC

RRC: ACTIVE SET UPDATE(DCH: DCCH)mtype 38

mtype17, 50

mtype 82

Node B112

RNC12

SCCP(CO): DT1[RNSAP(RADIO LINK DELETION REQUEST)]

SCCP(CO): DT1[RNSAP(RADIO LINK DELETION RESPONSE)]

Page 75: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01

SECTION 11Inter-Frequency Handover

Page 76: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Inter-Frequency Handover

11-1

11. Inter-Frequency Handover

Fig. 11-1 shows a message sequence of the inter-frequency handover procedure.

The following measurement types are used in the sequence:

• mtype 27Number of attempted outgoing hard handovers per adjacent cell pair

• mtype 28Number of successful outgoing hard handovers per adjacent cell pair

• mtype 29Number of unsuccessful outgoing hard handovers per adjacent cell per failure cause

• mtype 30Number of attempted outgoing hard handovers per handover type (Intra-Node B)Number of attempted outgoing hard handovers per handover type (Inter-Node B/Intra-RNC)Number of attempted outgoing hard handovers per handover type (Inter-RNC)Number of attempted outgoing hard handovers per handover type (Inter-RAT)

• mtype 31Number of successful outgoing hard handovers per handover type (Intra-Node B)Number of successful outgoing hard handovers per handover type (Inter-Node B/Intra-RNC)Number of successful outgoing hard handovers per handover type (Inter-RNC)Number of successful outgoing hard handovers per handover type (Inter-RAT)

• mtype 32Number of unsuccessful outgoing hard handovers per handover type per failure cause (Intra-Node B)Number of unsuccessful outgoing hard handovers per handover type per failure cause (Inter-Node B/Intra-RNC)Number of unsuccessful outgoing hard handovers per handover type per failure cause (Inter-RNC)

Page 77: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Inter-Frequency Handover

11-2

Number of unsuccessful outgoing hard handovers per handover type per failure cause (Inter-RAT)

• mtype 82Number of used codes per spreading factor

• mtype 102Number of attempted code requests per spreading factor

• mtype 103Number of attempted radio link establishments per SF

• mtype 104Number of successful radio link establishments per SF

• mtype 105Number of radio link failures per failure cause

• mtype 164Number of attempted physical channel reconfigurations

• mtype 165Number of successful physical channel reconfigurations

• mtype 205Number of UEs per active link set size

• mtype 221Number of successful code requests per spreading factor

Page 78: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Inter-Frequency Handover

11-3

NBAP: RADIO LINKADDITION REQUEST

mtype27, 30, 164

RRC: PHYSICAL CHANNEL RECONFIGURATIONCOMPLETE(DCH: DCCH)

RRC: MEASUREMENT REPORT(DCH: DCCH)

NBAP: RADIO LINKADDITION RESPONSE

RRC: PHYSICAL CHANNELRECONFIGURATION(DCH: DCCH)

NBAP: RADIO LINKRESTORE INDICATION

NBAP: RADIO LINKFAILURE INDICATION

NBAP: RADIO LINKFAILURE INDICATION

NBAP: RADIO LINKFAILURE INDICATION

RNSAP: RADIO LINKFAILURE INDICATION

mtype28, 29, 31, 32, 165

Fig. 11-1 Inter-Frequency Handover (1/2)

UENode B111

Node B112

RNC11Node B121

RNC12

NBAP: RADIO LINKDELETION RESPONSE

mtype82, 102, 103, 221

mtype 105

mtype 105

NBAP: RADIO LINKDELETION REQUEST

mtype 105

mtype 82

NBAP: RADIO LINKDELETION REQUEST

mtype 82

end ofcoverage

Node B111

Node B112

RNC12(DRNC)

Node B121

RNC11(SRNC)

freq 2

freq 1

UEsame

antennaend of

coverage

Node B111

Node B112

Node B121

freq 2

freq 1

UEsameantenna

RNC12RNC11(SRNC)

mtype 104

Page 79: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Inter-Frequency Handover

11-44 Pages

Fig. 11-1 Inter-Frequency Handover (2/2)

end ofcoverage

QAAL2(Iub):RELEASE REQUEST

QAAL2(Iub):RELEASE CONFIRM

SCCP(CO): RLSD

SCCP(CO): RLC

Node B111

Node B112

RNC12(DRNC)

Node B121

RNC11(SRNC)

freq 2

freq 1

UEsame

antenna

Node B111

Node B111

Node B112

RNC12

Node B121

RNC11(SRNC)

freq 2

freq 1

UEsame

antenna

QAAL2(Iur): RELEASE REQUEST

QAAL2(Iur): RELEASE CONFIRM

QAAL2(Iub):RELEASE REQUEST

QAAL2(Iub):RELEASE CONFIRM

mtype 205

mtype 82

NBAP: RADIO LINKDELETION REQUEST

NBAP: RADIO LINKDELETION RESPONSE

RRC: MEASUREMENT CONTROL(DCH: DCCH)

RRC: MEASUREMENT CONTROL(DCH: DCCH)

RRC: MEASUREMENT CONTROL(DCH: DCCH)

NBAP: RADIO LINKDELETION RESPONSE

UENode B112

Node B121

RNC12

end ofcoverage

SCCP(CO): DT1[RNSAP(RADIO LINK DELETION REQUEST)]

SCCP(CO): DT1[RNSAP(RADIO LINK DELETION RESPONSE)]

RNC11

Page 80: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01

SECTION 12Relocation

Page 81: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Relocation

12-1

12. Relocation

Fig. 12-1 shows a message sequence of the relocation.

The following measurement types are used in the sequence:

• mtype 167Number of cell updates per update cause

• mtype 180Number of attempted outgoing relocation preparations per relocation cause per relocation type (per intra/inter PLMN)

• mtype 182Number of successful outgoing relocation preparations per relocation cause per relocation type (per intra/inter PLMN)

• mtype 183Number of attempted incoming relocations per relocation cause

• mtype 184Number of successful incoming relocations per relocation cause

• mtype 186Number of Iu release commands per release cause

Page 82: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Relocation

12-2

Fig. 12-1 Relocation (1/2)

UE RNC11

mtype 180

RRC: CELL UPDATE(RACH: CCCH)

(GTP-C: FORWARDRELOCATION REQUEST)

SCCP(CO): DT1[RANAP(RELOCATION REQUIRED)]

SGSN2 RNC21

mtype 167

SCCP(CO):CR[RANAP(none)]

SCCP(CO):CC[RANAP(none)]

SCCP(CO): DT1[RANAP(RELOCATION REQUEST)]

mtype 183

SCCP(CO): DT1[RANAP(RELOCATION REQUEST ACKNOWLEDGE)]

mtype 184

(GTP-C: FORWARDRELOCATION RESPONSE)

SCCP(CO): DT1[RANAP(RELOCATION COMMAND)]

mtype 182This is counted uponreceiving theRELOCATON COMMAND.

SCCP(CL): UDT[RNSAP(RELOCATION COMMIT)]

FORWARDING OF DATA

SCCP(CO): DT1[RANAP(RELOCATION DETECT)]

SCCP(CL): UDT[RNSAP(UPLINK SIGNALING TRANSFER INDICATION)]

SGSN1

Page 83: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Relocation

12-33 Pages

Fig. 12-1 Relocation (2/2)

UE SGSN1

mtype186, 81

(GTP-C: FORWARDRELOCATION COMPLETE)

SGSN2 RNC21

RRC: DOWNLINK DIRECT TRANSFER(FACH: DCCH)

(GTP-C: FORWARD RELOCATIONCOMPLETE ACKNOWLEDGE)

RNC11

SCCP(CO): DT1[RANAP(IU RELEASE COMPLETE)]

SCCP(CO): RLSD

SCCP(CO): RLC

(UPDATE PDPCONTEXT REQUEST)

(UPDATE PDP CONTEXTRESPONSE)

GGSN

RRC: RADIO BEARER RECONFIGURATION(RACH: DCCH)

SCCP(CO): DT1[RANAP(RELOCATION COMPLETE)]

RRC: CELL UPDATE CONFIRM(FACH: CCCH)

RRC: MEASUREMENT CONTROL(FACH: DCCH)

SCCP(CO): DT1[RANAP(IU RELEASE COMMAND)]

Page 84: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01

SECTION 13Inter-System Handover

Page 85: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Inter-System Handover

13-1

13. Inter-System Handover

13.1 From UMTS to GSM

Fig. 13-1 shows a message sequence of the inter-system handover (from UMTS to GSM).

The following measurement types are used in the sequence:

• mtype 30Number of attempted outgoing hard handovers per handover type (Inter-RAT)

• mtype 31Number of successful outgoing hard handovers per handover type (Inter-RAT)

• mtype 82Number of used codes per spreading factor

• mtype 115Number of CN initiated RAB releases per release cause

• mtype 173Number of attempted relocation preparations for outgoing inter-system handovers per adjacent cell pair

• mtype 175Number of attempted outgoing inter-system handovers per adjacent cell pair

• mtype 177Number of successful outgoing inter-system handovers per adjacent cell pair

• mtype 180Number of attempted outgoing relocation preparations per relocation cause per relocation type (per intra/inter PLMN)

• mtype 182Number of successful outgoing relocation preparations per relocation cause per relocation type (per intra/inter PLMN)

Page 86: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Inter-System Handover

13-2

Fig. 13-1 From-UMTS-to-GSM Handover

Node B

NBAP: RADIO LINKDELETION RESPONSE

UE MSC

mtype 82

NBAP: RADIO LINKDELETION REQUEST

QAAL2(Iub):RELEASE REQUEST

SCCP(CO): RLSD

QAAL2(Iub):RELEASE CONFIRM

RRC: MEASUREMENT REPORT(DCH: DCCH)

SCCP(CO): DT1[RANAP(RELOCATION REQUIRED)]

SCCP(CO): DT1[RANAP(IU RELEASE COMMAND)]

mtype173, 180

mtype30, 175

SCCP(CO): DT1[RANAP(IU RELEASE COMPLETE)]

RRC: HANDOVER FROM UTRANCOMMAND(DCH: DCCH)

QAAL2(Iu): RELEASE REQUEST

QAAL2(Iu): RELEASE CONFIRM

SCCP(CO): RLC

SCCP(CO): DT1[RANAP(RELOCATION COMMAND)]

mtype 182

RNC

mtype31, 115, 177

Page 87: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Inter-System Handover

13-3

13.2 From UMTS to GPRS

Fig. 13-2 shows a message sequence of the inter-System handover (from UMTS to GPRS).

The following measurement types are used in the sequence:

• mtype 31Number of successful outgoing hard handovers per handover type (Inter-RAT)

• mtype 115Number of CN initiated RAB releases per release cause

• mtype 177Number of successful outgoing inter-system handovers per adjacent cell pair

Page 88: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Inter-System Handover

13-4

Fig. 13-2 From-UMTS-to-GPRS Handover

Node BUE MSC

SCCP(CO): RLSD

SCCP(CO): DT1[RANAP(SRNS CONTEXT REQUEST)]

SCCP(CO): DT1[RANAP(IU RELEASE COMMAND)]

SCCP(CO): DT1[RANAP(IU RELEASE COMPLETE)]

SCCP(CO): RLC

SCCP(CO): DT1[RANAP(SRNS CONTEXT RESPONSE)]

RNC

mtype31, 115, 177

CELL_FACH,CELL_PCH,or URA_PCH

Page 89: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Inter-System Handover

13-5

13.3 From UMTS to GPRS(PS)

Fig. 13-3 shows a message sequence of the inter-System handover (from UMTS to GPRS) of PS call on Cell_DCH.

The following measurement types are used in the sequence:

• mtype 31Number of successful outgoing hard handovers per handover type (Inter-RAT)

• mtype 82Number of used codes per spreading factor

• mtype 115Number of CN initiated RAB releases per release cause

• mtype 175Number of attempted outgoing inter-system handovers per adjacent cell pair

• mtype 177Number of successful outgoing inter-system handovers per adjacent cell pair

Page 90: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Inter-System Handover

13-6

Fig. 13-3 From-UMTS-to-GPRS(PS) Handover

Node BUE SGSN

SCCP(CO): RLSD

SCCP(CO): DT1[RANAP(SRNS CONTEXT REQUEST)]

SCCP(CO): DT1[RANAP(IU RELEASE COMMAND)]

SCCP(CO): DT1[RANAP(IU RELEASE COMPLETE)]

SCCP(CO): RLC

SCCP(CO): DT1[RANAP(SRNS CONTEXT RESPONSE)]

RNC

mtype31, 115, 177

PS CELL_DCH Single Call

RRC: MEASUREMENT REPORT

(DCH:DCCH AM) (Event:3A)

RRC: CELL CHARGE ORDER

FROM UTRAN (DCH:DCCH AM)

mtype 175

NBAP: RADIO LINKDELETION RESPONSE

mtype 82

NBAP: RADIO LINKDELETION REQUEST

QAAL2(Iub):RELEASE REQUEST

QAAL2(Iub):RELEASE CONFIRM

Page 91: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Inter-System Handover

13-7

13.4 From GSM to UMTS

Fig. 13-4 shows a message sequence of the inter-System handover (from GSM to UMTS).

The following measurement types are used in the sequence:

• mtype 82Number of used codes per spreading factor

• mtype 102Number of attempted code requests per spreading factor

• mtype 103Number of attempted radio link establishments per SF

• mtype 104Number of successful radio link establishments per SF

• mtype 179Number of successful incoming CS inter RAT handovers

• mtype 221Number of successful code requests per spreading factor

Page 92: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Inter-System Handover

13-88 Pages

Fig. 13-4 From-GSM-to-UMTS Handover

Node B MSCUE RNC

mtype 179

SGSN

RRC: HANDOVER TO UTRANCOMPLETE(DCH: DCCH AM)

SCCP(CO): CR [RANAP(none)]

NBAP: RADIO LINKSETUP REQUEST

NBAP: RADIO LINKSETUP RESPONSE

mtype 82, 102, 103, 221

QAAL2 (Iub):ESTABLISH REQUEST

QAAL2 (Iub):ESTABLISH CONFIRM

NBAP: RADIO LINKRESTORE INDICATION

mtype 104

SCCP(CO): CC [RANAP(none)]

QAAL2(Iu): ESTABLISH REQUEST

SCCP(CO): DT1 [RANAP(RELOCATION REQUEST)]

QAAL2(Iu): ESTABLISH CONFIRM

SCCP(CO): DT1 [RANAP(RELOCATION ACKNOWLEDGE)]

SCCP(CO): DT1 [RANAP(RELOCATION DETECT)]

SCCP(CO): DT1 [RANAP(RELOCATION COMPLETE)]

RRC: UTRAN MOBILITY INFORMATION(DCH: DCCH UM)

RRC: UTRAN MOBILITY INFORMATIONCONFIRM(DCH: DCCH AM)

Page 93: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01

SECTION 14Inter-Node Connection

Page 94: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Inter-Node Connection

14-1

14. Inter-Node Connection

14.1 NG Occurrence after Receiving RANAP: RAB Assignment Request at RAB Establishment

Fig. 14-1 shows a CS semi-normal message sequence of the NG occurrence after receiving RANAP: RAB assignment request at RAB establishment in the inter-node connection.

The following measurement types are used in the sequence:

• mtype 1Number of attempted RRC connection establishments per establishment cause

• mtype 2Number of successful RRC connection establishments per establishment cause

• mtype 82Number of used codes per spreading factor

• mtype 102Number of attempted code requests per spreading factor

• mtype 103Number of attempted radio link establishments per SF

• mtype 104Number of successful radio link establishments per SF

• mtype 109Number of unsuccessful RAB establishments per failure cause

• mtype 159Number of attempted RRC connection releases on DCCH per release cause

• mtype 161Number of attempted signaling connection establishments

• mtype 185Number of Iu release requests per release cause

• mtype 186

Page 95: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Inter-Node Connection

14-2

Number of Iu release commands per release cause

• mtype 221Number of successful code requests per spreading factor

Page 96: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Inter-Node Connection

14-3

QAAL2 (Iub):ESTABLISH REQUEST

QAAL2 (Iub):ESTABLISH CONFIRM

Node B MSCUE RNC

RRC: RRC CONNECTIONREQUEST(RACH: CCCH)

mtype 1

mtype82, 102, 103, 221

NBAP: RADIO LINKSETUP RESPONSE

NBAP: RADIO LINKSETUP REQUEST

mtype 2

NBAP: RADIO LINKRESTORE INDICATION

Fig. 14-1 NG Occurrence after Receiving RANAP: RAB Assignment Request (1/3)

INITIATION RESPONSE

INITIATION REQUEST

INITIATION RESPONSE

INITIATION REQUEST

mtype 104

NBAP: DEDICATED MEASUREMENT

NBAP: DEDICATED MEASUREMENT

NBAP: DEDICATED MEASUREMENT

NBAP: DEDICATED MEASUREMENT

RRC: RRC CONNECTION SETUP(FACH:CCCH)

RRC: RRC CONNECTION SETUPCOMPLETE(DCH: DCCH)

RRC: MEASUREMENT CONTROL(DCH: DCCH)

RRC: INITIAL DIRECT TRANSFER(MM: CM SERVICE REQUEST(DCH:DCCH))

Page 97: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Inter-Node Connection

14-4

Node B MSCUE RNC

RRC: SECURITY MODECOMMAND (DCH: DCCH)

RRC: UPLINK DIRECT TRANSFER(CC: SETUP (DCH: DCCH))

SCCP (CO): DT1 [RANAP (SECURITY MODE COMPLETE)]

RRC: SECURITY MODECOMPLETE (DCH: DCCH)

SCCP (CO): DT1 [RANAP (DIRECT TRANSFER (SETUP))]

SCCP (CO): DT1 [RANAP (DIRECT TRANSFER(CALL PROCEEDING))]

RRC: DOWNLINK DIRECT TRANSFER(CC: CALL PROCEEDING(DCH: DCCH))

SCCP (CO): DT1 [RANAP (RAB ASSIGNMENT REQUEST)]NG occurrencepoint:due toabnormal messagereception orinternal resourceshortage

mtype 161

SCCP(CO): CC[RANAP(none)]

SCCP(CO): CR[RANAP(INITIAL UE MESSAGE(CM SERVICE REQUEST))]

SCCP(CO): DT1[RANAP(DIRECT TRANSFER(AUTHENTICATION REQUEST))]

SCCP(CO): DT1[RANAP(DIRECT TRANSFER(AUTHENTICATION RESPONSE))]

SCCP(CO): DT1[RANAP(COMMAND ID)]

SCCP(CO): DT1[RANAP(SECURITY MODE COMMAND)]

RRC: DOWNLINK DIRECT TRANSFER(MM: AUTHENTICATION REQUEST (DCH: DCCH))

RRC: UPLINK DIRECT TRANSFER(MM: AUTHENTICATION RESPONSE (DCH: DCCH))

Fig. 14-1 NG Occurrence after Receiving RANAP: RAB Assignment Request (2/3)

Page 98: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Inter-Node Connection

14-5

Fig. 14-1 NG Occurrence after Receiving RANAP: RAB Assignment Request (3/3)

Node B MSCUE RNC

mtype 185SCCP (CO): DT1 [RANAP (IU RELEASE REQUEST)]

SCCP (CO): DT1 [RANAP (IU RELEASE COMMAND)]mtype186, 81

RRC: RRC CONNECTIONRELEASE (DCH: DCCH)

mtype 159

RRC: RRC CONNECTIONCOMPLETE (DCH: DCCH)

NBAP: RADIO LINKDELETION REQUEST

mtype 82

NBAP: RADIO LINKDELETION RESPONSE

QAAL2 (Iub):RELEASE REQUEST

QAAL2 (Iub):RELEASE CONFIRM

SCCP (CO): DT1 [RANAP (IU RELEASE COMPLETE)]

SCCP (CO): DT1 [RANAP (RAB ASSIGNMENT RESPONSE)]mtype 109

Page 99: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Inter-Node Connection

14-6

14.2 Racing of NBAP_RLFailureInd Reception for Waiting for ALCAP Establish Confirm

Fig. 14-2 shows a CS semi-normal message sequence of the racing of NBAP_RLFailureInd reception for waiting for ALCAP Establish Confirm in the inter-node connection.

The following measurement types are used in the sequence:

• mtype 1Number of attempted RRC connection establishments per establishment cause

• mtype 82Number of used codes per spreading factor

• mtype 102Number of attempted code requests per spreading factor

• mtype 103Number of attempted radio link establishments per SF

• mtype 104Number of successful radio link establishments per SF

• mtype 105Number of radio link failures per failure cause

• mtype 107Number of failed RRC connection establishments per failure cause

• mtype 221Number of successful code requests per spreading factor

Page 100: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Inter-Node Connection

14-7

Fig. 14-2 Racing of NBAP_RLFailureInd Reception

Node BUE RNC

QAAL2 (Iub):ESTABLISH REQUEST

mtype 1

mtype82, 102, 103, 221

NBAP: RADIO LINKFAILURE INDICATION

NBAP: RADIO LINKSETUP RESPONSE

NBAP: RADIO LINKSETUP REQUEST

mtype 105

RRC: RRC CONNECTIONREJECT(PACT: CCCH)

mtype 107

RRC: RRC CONNECTIONREQUEST(RACH: CCCH)

NBAP: RADIO LINKDELETION REQUEST

QAAL2 (Iub):RESET REQUEST

mtype 82

NBAP: RADIO LINKDELETION RESPONSE

QAAL2 (Iub):RESET CONFIRM

mtype 104

Page 101: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Inter-Node Connection

14-8

14.3 Racing of RRC_SigConnRelInd Reception after RRC_RRCConnSetupComp

Fig. 14-3 shows a CS semi-normal message sequence of the racing of RRC_SigConnRelInd reception after RRC_RRConnSetupComp in the inter-node connection.

The following measurement types are used in the sequence:

• mtype 1Number of attempted RRC connection establishments per establishment cause

• mtype 2Number of successful RRC connection establishments per establishment cause

• mtype 82Number of used codes per spreading factor

• mtype 102Number of attempted code requests per spreading factor

• mtype 103Number of attempted radio link establishments per SF

• mtype 104Number of successful radio link establishments per SF

• mtype 159Number of attempted RRC connection releases on DCCH per release cause

• mtype 162Number of signaling connection release requests

• mtype 221Number of successful code requests per spreading factor

Page 102: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Inter-Node Connection

14-9

QAAL2 (Iub):ESTABLISH REQUEST

QAAL2 (Iub):ESTABLISH CONFIRM

Node BUE RNC

mtype 1

mtype82, 102, 103, 221

NBAP: RADIO LINKSETUP RESPONSE

NBAP: RADIO LINKSETUP REQUEST

mtype 2

RRC: RRC CONNECTIONREQUEST(RACH: CCCH)

INITIATION RESPONSE

INITIATION REQUEST

INITIATION RESPONSE

mtype 162

INITIATION REQUEST

Fig. 14-3 Racing of RRC_SigConnRelInd Reception (1/2)

mtype 104

NBAP: DEDICATED MEASUREMENT

NBAP: DEDICATED MEASUREMENT

NBAP: DEDICATED MEASUREMENT

NBAP: DEDICATED MEASUREMENT

RRC: RRC CONNECTION SETUP(FACH:CCCH)

RRC: RRC CONNECTION SETUPCOMPLETE(DCH: DCCH)

RRC: SIGNALING CONNECTION RELEASEINDICATION (DCH:DCCH)

Page 103: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Inter-Node Connection

14-10

Fig. 14-3 Racing of RRC_SigConnRelInd Reception (2/2)

Node BUE RNC

RRC: RRC CONNECTIONRELEASE(DCH: DCCH)

mtype 159

RRC: RRC CONNECTION RELEASECOMPLETE(DCH: DCCH)

NBAP: RADIO LINKDELETION REQUEST

QAAL2 (Iub):RESET REQUEST

mtype 82

NBAP: RADIO LINKDELETION RESPONSE

QAAL2 (Iub):RESET CONFIRM

Page 104: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Inter-Node Connection

14-11

14.4 NG Occurrence after Receiving ALCAP: Establish Confirm (Iub) at RAB Establishment

Fig. 14-4 shows a CS semi-normal message sequence of the NG occurrence after Receiving ALCAP: Establish Confirm (Iub) at RAB Establishment in the inter-node connection.

The following measurement type is used in the sequence:

• mtype 31Number of successful outgoing hard handovers per handover type (Inter-RAT)

• mtype 109Number of unsuccessful RAB establishments per failure cause

• mtype 114Number of UTRAN initiated RAB releases per release cause

• mtype 115Number of CN initiated RAB releases per release cause

• mtype 177Number of successful outgoing inter-system handovers per adjacent cell pair

Page 105: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Inter-Node Connection

14-12

Fig. 14-4 NG Occurrence after Receiving ALCAP: Establish Confirm (Iub)

Node B MSCUE RNC

NBAP: RADIO LINKDELETION RESPONSE

mtype 109

QAAL2(Iu): RELEASE REQUEST

QAAL2 (Iub):ESTABLISH REQUEST

QAAL2 (Iub):ESTABLISH CONFIRM

SCCP(CO): DT1[RANAP(RAB ASSIGNMENT RESPONSE)]

SCCP(CO): DT1[RANAP(IU RELEASE REQUEST)]

SCCP(CO): DT1[RANAP(IU RELEASE COMMAND)]

NBAP: RADIO LINKDELETION REQUEST

QAAL2 (Iub):RELEASE REQUEST

QAAL2 (Iub):RELEASE CONFIRM

QAAL2 (Iub):RELEASE REQUEST

QAAL2 (Iub):RELEASE CONFIRM

For DCCH

For DTCH

QAAL2(Iu): RELEASE CONFIRM

SCCP(CO): DT1[RANAP(IU RELEASE COMPLETE)]

SCCP(CO): RLSD

SCCP(CO): RLC

mtype 114

mtype31, 115, 177

RRC: RRC CONNECTION RELEASE(DCH:DCCH)

RRC: RRC CONNECTION RELEASECOMPLETE(DCH:DCCH)

Page 106: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Inter-Node Connection

14-13

14.5 RRC ConnectionSetupComplete Wait Time-out

Fig. 14-5 shows a PS semi-normal message sequence of the RRC ConnectionSetupComplete Wait Time-out in the inter-node connection.

The following measurement type is used in the sequence:

• mtype 107Number of failed RRC connection establishments per failure cause

Page 107: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Inter-Node Connection

14-1414 Pages

Fig. 14-5 RRC ConnectionSetupComplete Wait Time-out

Node BUE RNC

NBAP: RADIO LINKDELETION RESPONSE

RRC: RRC CONNECTIONREJECT (FACH:CCCH)

NBAP: RADIO LINKDELETION REQUEST

QAAL2 (Iub):RELEASE REQUEST

QAAL2 (Iub):RELEASE CONFIRM

mtype 107

RRC: RRC CONNECTION SETUP(FACH:CCCH)

NBAP: RADIO LINKRESTORE INDICATION

RRC: RRC CONNECTION SETUP COMPLETE Wait Time-out

Page 108: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01

SECTION 15Cell Update

Page 109: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Cell Update

15-1

15. Cell Update

Fig. 15-1 shows a message sequence of the cell update.

The following measurement types are used in the sequence:

• mtype 167Number of cell updates per update cause

• mtype 168Number of incoming cell updates per update cause per adjacent cell pair

Page 110: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Cell Update

15-22 Pages

Fig. 15-1 Cell Update

Node BUE RNC SGSN

mtype167, 168

RRC: CELL UPDATE CONFIRM(FACH: CCCH)

RRC: CELL UPDATE(RACH: CCCH)

Page 111: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01

SECTION 16URA Update

Page 112: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 URA Update

16-1

16. URA Update

Fig. 16-1 shows a message sequence of the URA update.

The following measurement type is used in the sequence:

• mtype 169Number of URA updates per update cause

Page 113: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 URA Update

16-22 Pages

Fig. 16-1 URA Update

Node BUE RNC SGSN

mtype 169

RRC: URA UPDATE(RACH: CCCH)

RRC: URA UPDATE CONFIRM(FACH: CCCH)

Page 114: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01

SECTION 17Common Measurement

Report Reception

Page 115: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Common Measurement Report Reception

17-1

17. Common Measurement Report Reception

Fig. 17-1 shows a message sequence of the common measurement report reception.

The following measurement types are used in the sequence:

• mtype 99Transmitted carrier power

• mtype 206Received total wide band power

Page 116: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Common Measurement Report Reception

17-22 Pages

Fig. 17-1 Common Measurement Report Reception

Node BUE RNC SGSN

NBAP: COMMONMEASUREMENT REPORT mtype

206, 99

Page 117: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01

SECTION 18Abbreviation List

Page 118: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Abbreviation List

18-1

18. Abbreviation List

Abbreviation Meaning

ALCAP Access Link Control Application Part

CC Connection Confirm

CCCH Common Control Channel

CE Channel Element

CGI Cell Global ID

CL Connectionless

CM Configuration Management

CO Connection Oriented

CR Connection Request

CS Circuit Switched

DCCH Dedicated Control Channel

DCH Dedicated Channel

DHT Diversity Handover Trunk

DL Downlink

DRNC Drift Radio Network Controller

DT1 Data Type 1

DTCH Dedicated Traffic Channel

EDGE Enhanced Data Rates for GSM Evolution

FACH Forward Link Access Channel

GERAN GSM/EDGE Radio Access Network

GGSN Gateway GPRS Support Node

GMM GPRS Mobility Management

GPRS General Packet Radio Service

GSM Global System for Mobile Communications

GTP-C GPRS Tunneling Protocol - Control Plane

HHO Hard Handover

Page 119: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Abbreviation List

18-2

IU Interface Between an RNC and a Core Network

MEID managedElementId

MM Mobility Management

MOC Managed Object Class Mobile Originated Call

MSC Mobile-services Switching Center

MTC Mobile Terminated Call

mtype Measurement Type

NBAP Node B Application Part

PCCH Paging Control Channel

PCH Paging Channel

PDP Packet Data Protocol

PF Platform

PRACH Physical Random Access Channel

PRLC Packet for Radio Link Control

PS Packet Switched

PTI Protocol Type Identifier

QAAL2 ATM Adaptation Layer Type Signaling Protocol 2

QoS Quality of Service

RAB Radio Access Bearer

RACH Random Access Channel

RANAP Radio Access Network Application Part

RL Radio Link

RLC Release Complete

RLSD Released

RNC Radio Network Controller

RNS Radio Network System

RNSAP Radio Network Subsystem Application Part

RRC Radio Resource Control

Abbreviation Meaning

Page 120: tedpmmf

A50016-G5000-F201-1-7618ND-57172-704 (E)-01 Abbreviation List

18-33 Pages

RC Radio Commander

SCCP Signalling Connection Control Part

SCCPCH Secondary Common Control Physical Channel

SF Spreading Factor

SHO Soft Handover

SGSN Serving GPRS Support Node

SM Session Management

SRNC Source RNC

SRNS Serving Radio Network Subsystem

TMSI Temporary Mobile Subscriber Identity

UDI Unrestricted Digital Information

UDT User Data Transfer

UE User Equipment

UL Uplink

UMTS Universal Mobile Telecommunications System

URA UTRAN Registration Area

UTRAN UMTS Terrestrial Radio Access Network

VC Virtual Channel

VCI Virtual Channel Identifier

VP Virtual Path

Abbreviation Meaning