Technology and Skills in the Construction Industry
Mar 28, 2015
Technology and Skills in the Construction Industry
Introduction The UK Commission is working to transform the UK’s approach to investing in the skills of its people as an intrinsic part of securing jobs and growth. Key to our ambition is the need to encourage greater employer ownership of skills, working to secure long term sustainable partnerships.
This slide pack and accompanying evidence report present the case for more employers to invest in developing higher level skills in the Construction Industry. It explores the skills required to meet the demands created by existing and emerging technologies in construction. The main focus is on innovative modern methods of construction, particularly offsite construction.
Slide packs and reports are also available for a number of other sectors from: www.ukces.org.uk Each of the sectors are important to the economy in terms of driving up higher level skills through technological advancements.
For information about this slide pack and accompanying report please contact:Helen Beck ([email protected])
Source information can be found in the notes section of each slide.
2
StoryboardWhat is the impact of
technology on higher level skills
needs in the construction
industry?
The UK construction
industry today
Technology in the construction
industry
Offsite construction and
drivers influencing take
up
Skills and job roles in offsite construction
Future skills and job roles in
offsite construction
Opportunities and challenges
Implications for the government and construction
industry
3
The UK construction industry today
• The construction industry is a key sector for the UK economy, contributing nearly £90 billion with around 3 million jobs based in construction.
• The sector is dominated by high levels of self employment, with small and micro businesses accounting for around 95% of the sector, although large companies conduct a disproportionate proportion of the work by value.
• The global construction market is forecast to grow by over 70% by 2025, with positive signs of growth for the industry in the UK.
• A key challenge for the sector is to maintain its supply of skills, especially during periods of weak demand.
4
Technology in the construction industry
• Technological change and the drive towards sustainable and low-carbon construction impacts on skills needs within the industry. High level skills will be needed to drive the development and use of innovative methods of building and the uptake of new technologies and materials.
• Modern methods of construction (MMC) have the potential to introduce greater efficiencies into the construction process, chiefly through innovations in building design and management – for example in adoption of Building Information Modelling (BIM) – and in offsite construction processes.
• This presents a major opportunity to build quicker, to a higher quality, more sustainably, foster innovation and compete on the global market.
• MMC and the implementation of low carbon systems will require new skills and the adaption and upgrading of the skills of people currently working in the sector.
5
The demand for skills and jobs
Aims to understand the requirements for high level (and supporting) technical skills, focussing on the supply chain from innovation to development through to use of technologies:
6
Innovation
Scientific research and development and birth of new technology and methods
Development
Integration of technology into new products or processes
Use
Application of new technology and processes
The study explores the skills required to meet the demands created by the use of offsite construction and the associated impact on job roles.
Definition of offsite construction
12% of construction takes place offsite. The most recent estimates (2006) suggest the value of offsite construction – specifically the part of the industry using techniques not as yet routinely used in mainstream construction – is around £1.5 billion.
Four main categories of production are recognised as ‘offsite’ and these link closely with the manufacturing sector.
7
Offsite
Component sub-
assembly
Non-volumetri
c pre-assembly
Volumetric pre-
assembly
Complete buildings
Offsite is most commonly associated with pre-fabricated post war building but is increasingly technology driven
Offsite includes modules, pods, ‘kit’ homes, panelised systems and small scale items assembled offsite, such as windows and doors
Offsite construction: Context and drivers• The current recession has supressed the adoption of new
technologies but there is a growing acceptance that offsite will increase in importance and is key in realising new opportunities for the construction industry.
Drivers influencing the uptake of offsite include:
• Offsite is an opportunity to more tightly control costs, respond to Government targets for BIM and energy efficiency, increase efficiency in the build process and improve quality (including site health and safety).
• Future potential will lie in new technologies with the most commercial application: not necessarily the most ‘innovative’ or technologically advanced concepts. 8
UK Government commitment
Energy efficiency
and sustainabilit
y
Housing shortage
Fiscal uncertainty
Emerging technologie
s
Ageing workforce
Current geographical take up of offsite
At present the distribution of offsite construction activity is fairly irregular in terms of its geographical coverage. Some regional differences have been reported in the adoption of offsite:
• Largely concentrated in the South of England (mainly infrastructure projects such as schools, prisons and hospitals);
• Scotland has a large volume of timber frame production (as does Wales to an extent);
• Some evidence to suggest production sites are commonly located in areas with a history of manufacturing;
• Limited use of offsite method in Northern Ireland.
The training offer for offsite is equally as fragmented.9
Hubs of activity
Skills for offsite
10
Core skills, knowledge and behaviours
• Greater focus in future on a knowledge economy and increased interaction between design, construction, manufacturing and engineering disciplines
Knowledge, mutual understanding and
collaboration
• Increasing importance of ‘selling’ the concept of offsite, requiring skills in negotiation and influencing, and technical understanding of the technology
Marketing and business case development
• Management of the interface between offsite and onsite, requiring skills in timing, sequencing and scheduling
Project management
• BIM requires well developed IT skills• Knowledge of CAD and automated toolsInformation technology
• Requiring skills in phasing of the building process: development, production, utilisation and disposalPlanning and design
• Design to consider repair and maintenance requirements (such as air tightness), particularly critical to maintain energy efficiency
A whole life approach
Skills and job roles in offsite
A key function for the future will be subsequent onsite ‘assembly’ of offsite manufactured components: rather than ‘construction’ in the traditional sense.
11
Key differences between onsite and offsite
Integral link with manufacturing sector
Offsite construction is closely associated with manufacturing: relating the build process to manufacturing processes. The management of this process and the interface between the offsite and onsite environment is critical.
“There is a need for multi-skilled people that are able to understand the interaction between different materials, for example if you put timber and insulation products together, that will require knowledge of factors such as condensation risk. It is less about the individual materials but more about how they interact” (Technology developer)
Offsite manufacturing: Specialists skilled in highly repetitive
tasks
Onsite assembly: Specialists in assembly with a high degree of situational awareness
Skills and job roles in offsite
12
Primary, secondary and tertiary job roles required for offsite construction:
Primary
• Architect• BIM Modeller• CAD Specialist• Consultant• Designer• Logistics Manager• Manufacturer• Planner• Project Manager• Quantity Surveyor• Site Supervisor• Structural Engineer• Supply Chain Manager• Technician• Technical Salesperson
Secondary
• Bricklayer• Carpenter/Joiner• Electrician• Factory Worker• Glazer• Heating, Ventilation,
Air-Conditioning and Refrigeration Engineer
• Insulation Installer• Masonry Worker• Painter/Decorator• Plasterer• Plumber• Roofer• Tiler• Welder
Tertiary
• Banker• Design Office
Administrator• General Labourer• Insurer• Procurer• Scheduler
Qualifications and training
13
Concerns with existing education, training and qualification provision:
Training is largely conducted in
discipline silos
Much training takes place in-house
Disconnection between industry
and academia
Fragmented provision
Bespoke nature of offsite creates challenges to provision of
qualifications and training
Apprenticeship provision focussing on ‘traditional’ brick
and block construction
methods
Limited understanding of offsite and some
employer resistance to
change
“There are not enough design engineers – we have been trying to recruit them for months. Because the right skills are not available in
the market place the next best thing is to find people with the right drive
and train them up” (Technology developer)
“Businesses are developing their own,
better solutions (than are offered by many training
providers) to deliver training that is bespoke
to their needs” (Technology innovator)
Example: Timber frame construction Using a prefabricated timber frame is much
faster than traditional brick and block construction.
At present Scotland maintains the greatest
market share of timber framed building at
around 40% of all new housing.
14
“One of the main benefits in offsite timber frame construction is the speed at which erection can be carried out. We erected four new classrooms at a school in just less than 11 weeks, as a traditional construction project it would have taken months. Reducing timescales reduces disturbance and hazard” (Timber frame manufacturer)
Skills requir
ed
Dynamic insulation
Insulation fitting
Thermal bridging detailing
Waste water heat recovery
Procurement
Task manageme
nt
Cost manageme
nt
Mechanical ventilation installation
Timber frame construction: job roles
15
Job roles across all levels:
Design
• Architect• Architectural
Technician• Design
Consultant• Technical
Management• Timber Frame
Designer
Construction
• Contracts Manager
• Factory Manager
• Factory Operatives
• Health and Safety Manager
• Site Manager and Assistant
• Site Trades• Subcontractor
Commerce
• Buyer• Commercial
Manager• Site Surveyor
Sales and customer
care• Customer
Service Manager
• Customer Service Operative
• Marketing Executive
• Sales Administrator
• Sales Consultant
• Sales Manager
Example: Straw bale construction
• Straw bale construction uses straw bales either as a loadbearing structure or as infill to an independent structural system.
• Straw is warm, durable, renewable and has a negative carbon footprint, absorbing CO2 from the atmosphere.
• Emphasis on drawing and planning, as well as fitting and erection onsite. Roles within factories manufacturing panels are commonly filled with those trained in traditional construction methods such as carpentry and joinery.
• Skills for operational management and business roles include design, marketing and project management.
• Few universities include modules on prefabrication.16
Skills required
Future jobs and skills
• Multi-skilling and greater flexibility within
job roles is likely for onsite assembly.
• Offsite could result in multi-skilling becoming
more ‘mainstream’, with smaller teams being required to assemble
components onsite, needing to work more closely together.
• Occupations will be expected to work more collaboratively, rather than in silos, requiring a clearer knowledge and understanding of other job roles and how they contribute to the holistic offsite project.
• Roles may become more interlinked particularly at managerial and professional levels, for example, a technical sales role will require an overlap between commercial and technical skills.
17
The evolution of job rolesDesign
Engineering
Construction/ Manufacturin
g
“It is not really about new job roles, as it’s merely a transfer of skills from onsite to offsite.This will require people with a very good understanding of how systems are put together onsite” (Technology developer)
Future jobs and skills
• Understanding of the design/manufacture/construction interface;
• Highly developed skills in project management, scheduling and planning;
• High level skills in marketing, technical
sales, influencing and negotiating;
• Wider adoption of a ‘whole life approach’ to structures.
18
An increased requirement for:
“Designing for manufacture is a skill that we need to work on. It’s a mix really of a traditional design architect and a consulting engineer role. It’s all about turning what was a construction process into a manufacturing process” User of technology
“Offsite makes it more important to consider how work is planned, designed and scheduled. If managers have qualified with high level current qualifications but their expertise is traditionally onsite then it could be very difficult to move to offsite. It’s not necessarily the technical skills that are different but more the softer skills including planning, sequencing and link between design and build” User of technology
Future higher level job roles
• Architect
• BIM Modellers
• Designer
• Planner
• Site supervisor/manager or project manager
• Structural engineer
• Design office staff, including BIM modellers and CAD specialists
• Engineers
• Project managers
• Quantity surveyors
• Schedulers19
Greatest impact of offsite is expected for:
Future demand expected for
Opportunities
• Potential to encourage a greater diversity of people, including more young people, into the sector due to weatherproof working conditions and reduction in the use of manual labour;
• Contribute to environmental and sustainability targets;
• Respond to housing demand;
• Realise cost savings through reduced build time;
• Improve sector productivity and build quality;
• Improve health and safety;
• Increase efficiency in the construction process;
• Greater integration of roles and collaborative working;
• Expand construction export market to compete. globally
20
The increasing uptake and use of offsite construction can realise the following opportunities for the construction industry
“Offsite construction carried out in factories can employ many thousands of people who would otherwise be out of work. It opens up a new labour market” Technology developer
ChallengesThe future potential of offsite is heavily influenced by a number of competing factors affecting the level of market demand
• Construction industry can be conservative, leading to reluctance of some builders to adopt MMC/offsite;
• Need to achieve critical mass in production to realise cost-savings and avoid high capital costs;
• Risk averse financiers, investors and insurers;
• Time lag in new technologies reaching the market due to time required to gain certification and the recognition of new technologies;
• Strong and established international competition;
• Negative public associations with ‘pre-fabricated’ structures;
• Patchy’ geographical distribution of offsite industry and expertise;
• Lack of collaboration or direct connection between academia and industry;
• Fragmented training provision offer;
• Difficulties in forecasting growth and uptake of offsite technologies.
21
Conclusions: Implications for government and the industryCloser collaborative relationships
• Greater collaboration between industry and academia to influence the design of training programmes and qualifications.
• Consideration could be given to the creation of an Offsite Skills Network to bring together academia, research institutes and industry to share knowledge and establish an interface between innovation and commercial application.
Stimulating demand
• Trade Federations and Professional Bodies may wish to work collaboratively on programmes to educate investors, industry stakeholders and home-owners.
22
Conclusions: Implications (continued)
Training and qualifications
• A culture of ‘multi-skilling’ could be embedded at training stage. For instance, training could seek to equip students with a broader skills and knowledge base about offsite.
• Training and education providers could consider approaches to offsite training provision in Austria and Germany and identify good practice which can be transferred to the UK.
Careers information
• Advice and guidance to those seeking opportunities in the construction sector that includes consideration of offsite construction job roles could help offer clear pathways to higher level occupations and promote offsite to a greater diversity of people.
Continuing Professional Development
• The construction industry is more likely to be able to take advantage of CPD that can be delivered flexibly (for example via webinars outside of core working hours), and that is not cost prohibitive.
23