Technische Daten Technical data Mit starken Prüfwerten und einem breiten Prüfprogramm bieten die Schiebesysteme ein weites Lösungsspektrum für alle Anforderungen. Due to strong test values and a broad testing programme, the sliding systems offer a wide range of solutions to fulfil all requirements. Baubare Flügelgrößen Vent sizes Beschlagdiagramme Fittings diagrams Seite 158 Page 158 Statische Profil- und Abwick- lungswerte Structural profile and processing values für Schiebe-, Hebe-Schiebe, PASK und Falt-Schiebe-Serien for sliding, lift-and-slide, tilt/slide and folding sliding series Seite 194 Page 194 | 157 Schüco Technische Daten Technical data
68
Embed
Technische Daten Technical data€¦ · Technische Daten Technical data Mit starken Prüfwerten und einem breiten Prüfprogramm bieten die Schiebesysteme ein weites Lösungsspektrum
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Technische DatenTechnical data
Mit starken Prüfwerten undeinem breiten Prüfprogrammbieten die Schiebesystemeein weites Lösungsspektrumfür alle Anforderungen.
Due to strong test values anda broad testing programme,the sliding systems offer a widerange of solutions to fulfil allrequirements.
Baubare FlügelgrößenVent sizes
BeschlagdiagrammeFittings diagrams
Seite 158Page 158
Statische Profil- und Abwick-lungswerteStructural profile and processingvalues
für Schiebe-, Hebe-Schiebe, PASKund Falt-Schiebe-Serien
for sliding, lift-and-slide, tilt/slideand folding sliding series
Seite 194Page 194
| 157SchücoTechnische DatenTechnical data
|158 Schüco DiagrammeCharts
Schüco ASS 32.NI
Diagramme zur Ermittlung der Flügelgrößen: Schüco ASS 32.NI (Profil 308 240)Charts for calculating vent sizes: Schüco ASS 32.NI (profile 308 240)
h (m)
b / w (m)
h (m)
b / w (m)
h (m)
b / w (m)
Isolierglas
Double glazing
0 -- 8 m
8 -- 20 m
EinbauhöheInstallationheight
StatischeBelastungStructuralloading
0,5 kN/m2
0,8 kN/m2
| 159SchücoDiagrammeCharts
Schüco ASS 28 SC.NI / 32 SC.NI
Schüco-Schiebefenster und -türen(max. Flügelgewicht 80 -- 160 kg)Flügelgrößen, die unterhalb der Kurveliegen, sind statisch ausreichend.
Schüco sliding windows and doors(max. vent weight 80 -- 160 kg)Vent sizes below the line are structurallyadequate.
Diagramm zur Ermittlung der Flügelgrößen: Schüco ASS 32 SC.NI (Profil 308 110)Chart for calculating vent sizes: Schüco ASS 32 SC.NI (profile 308 110)
h (m)
b / w (m)
Diagramm zur Ermittlung der Flügelgrößen: Schüco ASS 32 SC.NI (Profil 308 120)Chart for calculating vent sizes: Schüco ASS 32 SC.NI profile (308 120)
h (m)
b / w (m)Isolierglas
Double glazing
Einfachglas
Single glazing
0 -- 8 m
8 -- 20 m
EinbauhöheInstallationheight
StatischeBelastungStructuralloading
0,5 kN/m2
0,8 kN/m2
|160 Schüco DiagrammeCharts
Schüco ASS 28 SC.NI / 32 SC.NI
Diagramm zur Ermittlung der Flügelgrößen: Schüco ASS 32 SC.NI (Profil 308 180)Chart for calculating vent sizes: Schüco ASS 32 SC.NI (profile 308 180)
h (m)
b / w (m)
Schüco-Schiebefenster und -türen(max. Flügelgewicht 80 -- 160 kg)Flügelgrößen, die unterhalb der Kurveliegen, sind statisch ausreichend.
Schüco sliding windows and doors(max. vent weight 80 -- 160 kg)Vent sizes below the line are structurallyadequate.
Isolierglas
Double glazing
Einfachglas
Single glazing
Diagramm zur Ermittlung der Flügelgrößen: Schüco ASS 28 SC.NI (Profil 308 070)Chart for calculating vent sizes: Schüco ASS 28 SC.NI (profile 308 070)
h (m)
b / w (m)
0 -- 8 m
8 -- 20 m
EinbauhöheInstallationheight
StatischeBelastungStructuralloading
0,5 kN/m2
0,8 kN/m2
| 161SchücoDiagrammeCharts
Diagramm zur Ermittlung der Flügelgrößen: Schüco ASS 28 SC.NI (Profil 308 080)Chart for calculating vent sizes: Schüco ASS 28 SC.NI (profile 308 080)
h (m)
b / w (m)
Diagramm zur Ermittlung der Flügelgrößen: Schüco ASS 28 SC.NI (Profil 309 220)Chart for calculating vent sizes: Schüco ASS 28 SC.NI (profile 309 220)
h (m)
b / w (m)
Schüco-Schiebefenster und -türen(max. Flügelgewicht 80 -- 160 kg)Flügelgrößen, die unterhalb der Kurveliegen, sind statisch ausreichend.
Schüco sliding windows and doors(max. vent weight 80 -- 160 kg)Vent sizes below the line are structurallyadequate.
Isolierglas
Double glazing
Einfachglas
Single glazing
0 -- 8 m
8 -- 20 m
EinbauhöheInstallationheight
StatischeBelastungStructuralloading
0,5 kN/m2
0,8 kN/m2
|162 Schüco DiagrammeCharts
Schüco ASS 28 SC.NI / 32 SC.NI
Diagramm zur Ermittlung der Flügelgrößen: Schüco ASS 28 SC.NI (Profile 308 070 / 308 080)Chart for calculating vent sizes: Schüco ASS 28 SC.NI (profiles 308 070 / 308 080)
h (m)
b / w (m)
Schüco-Schiebefenster und -türen(max. Flügelgewicht 80 -- 160 kg)Flügelgrößen, die unterhalb der Kurveliegen, sind statisch ausreichend.
Schüco sliding windows and doors(max. vent weight 80 -- 160 kg)Vent sizes below the line are structurallyadequate.
Isolierglas
Double glazing
Einfachglas
Single glazing
Diagramm zur Ermittlung der Flügelgrößen: Schüco ASS 28 SC.NI (Profile 308 070 / 309 220)Chart for calculating vent sizes: Schüco ASS 28 SC.NI (profiles 308 070 / 309 220)
h (m)
b / w (m)
0 -- 8 m
8 -- 20 m
EinbauhöheInstallationheight
StatischeBelastungStructuralloading
0,5 kN/m2
0,8 kN/m2
| 163SchücoDiagrammeCharts
Diagramm zur Ermittlung der Flügelgrößen: Schüco ASS 32 SC.NI (Profile 308 080 / 309 220)Chart for calculating vent sizes: Schüco ASS 32 SC.NI (profiles 308 080 / 309 220)h (m)
b / w (m)
Schüco-Schiebefenster und -türen(max. Flügelgewicht 80 -- 160 kg)Flügelgrößen, die unterhalb der Kurveliegen, sind statisch ausreichend.
Schüco sliding windows and doors(max. vent weight 80 -- 160 kg)Vent sizes below the line are structurallyadequate.
Isolierglas
Double glazing
Einfachglas
Single glazing
Diagramm zur Ermittlung der Flügelgrößen: Schüco ASS 32 SC.NI (Profile 308 110 / 308 120)Chart for calculating vent sizes: Schüco ASS 32 SC.NI (profiles 308 110 / 308 120)
h (m)
b / w (m)
0 -- 8 m
8 -- 20 m
EinbauhöheInstallationheight
StatischeBelastungStructuralloading
0,5 kN/m2
0,8 kN/m2
|164 Schüco DiagrammeCharts
Schüco ASS 28 SC.NI / 32 SC.NI
Diagramm zur Ermittlung der Flügelgrößen: Schüco ASS 32 SC.NI (Profile 308 110 / 308 180)Chart for calculating vent sizes: Schüco ASS 32 SC.NI (profiles 308 110 / 308 180)h (m)
b / w (m)
Schüco-Schiebefenster und -türen(max. Flügelgewicht 80 -- 160 kg)Flügelgrößen, die unterhalb der Kurveliegen, sind statisch ausreichend.
Schüco sliding windows and doors(max. vent weight 80 -- 160 kg)Vent sizes below the line are structurallyadequate.
Isolierglas
Double glazing
Einfachglas
Single glazing
Diagramm zur Ermittlung der Flügelgrößen: Schüco ASS 32 SC.NI (Profile 308 110 / 308 120)Chart for calculating vent sizes: Schüco ASS 32 SC.NI (profiles 308 110 / 308 120)h (m)
b / w (m)
0 -- 8 m
8 -- 20 m
EinbauhöheInstallationheight
StatischeBelastungStructuralloading
0,5 kN/m2
0,8 kN/m2
| 165SchücoDiagrammeCharts
Schüco ASS 32 SC
Diagramm zur Ermittlung der Flügelgrößen: Schüco ASS 32 SC (Profil 309 150)Chart for calculating vent sizes: Schüco ASS 32 SC (profile 309 150)
h (m)
b / w (m)
Schüco-Schiebefenster und -türen(max. Flügelgewicht 80 -- 160 kg)Flügelgrößen, die unterhalb der Kurveliegen, sind statisch ausreichend.
Schüco sliding windows and doors(max. vent weight 80 -- 160 kg)Vent sizes below the line are structurallyadequate.
Isolierglas
Double glazing
Diagramm zur Ermittlung der Flügelgrößen: Schüco ASS 32 SC (Profil 309 160)Chart for calculating vent sizes: Schüco ASS 32 SC (profile 309 160)
h (m)
b / w (m)
0 -- 8 m
8 -- 20 m
EinbauhöheInstallationheight
StatischeBelastungStructuralloading
0,5 kN/m2
0,8 kN/m2
|166 Schüco DiagrammeCharts
Schüco ASS 32 SC
Diagramm zur Ermittlung der Flügelgrößen: Schüco ASS 32 SC (Profil 309 170)Chart for calculating vent sizes: Schüco ASS 32 SC (profile 309 170)
h (m)
b / w (m)
Schüco-Schiebefenster und -türen(max. Flügelgewicht 80 -- 160 kg)Flügelgrößen, die unterhalb der Kurveliegen, sind statisch ausreichend.
Schüco sliding windows and doors(max. vent weight 80 -- 160 kg)Vent sizes below the line are structurallyadequate.
Isolierglas
Double glazing
Diagramm zur Ermittlung der Flügelgrößen: Schüco ASS 32 SC (Profile 309 150 / 309 160)Chart for calculating vent sizes: Schüco ASS 32 SC (profiles 309 150 / 309 160)
h (m)
b / w (m)
0 -- 8 m
8 -- 20 m
EinbauhöheInstallationheight
StatischeBelastungStructuralloading
0,5 kN/m2
0,8 kN/m2
| 167SchücoDiagrammeCharts
Diagramm zur Ermittlung der Flügelgrößen: Schüco ASS 32 SC (Profile 309 150 / 309 170)Chart for calculating vent sizes: Schüco ASS 32 SC (profiles 309 150 / 309 170)
h (m)
b / w (m)
Schüco-Schiebefenster und -türen(max. Flügelgewicht 80 -- 160 kg)Flügelgrößen, die unterhalb der Kurveliegen, sind statisch ausreichend.
Schüco sliding windows and doors(max. vent weight 80 -- 160 kg)Vent sizes below the line are structurallyadequate.
Isolierglas
Double glazing
Diagramm zur Ermittlung der Flügelgrößen: Schüco ASS 32 SC (Profile 309 160 / 309 170)Chart for calculating vent sizes: Schüco ASS 32 SC (profiles 309 160 / 309 170)
h (m)
b / w (m)
0 -- 8 m
8 -- 20 m
EinbauhöheInstallationheight
StatischeBelastungStructuralloading
0,5 kN/m2
0,8 kN/m2
|168 Schüco DiagrammeCharts
ohne Statikpfosten
without structural
mullion
mit Statikpfosten
with structural
mullion
Schüco ASS 43 / 48
Diagramm zur Ermittlung der Flügelgrößen: Schüco ASS 43 (Profil 148 740)Chart for calculating vent sizes: Schüco ASS 43 (profile 148 740)
Schüco-Schiebefenster und -türen(max. Flügelgewicht 80 -- 160 kg)Flügelgrößen, die unterhalb der Kurveliegen, sind statisch ausreichend.
Schüco sliding windows and doors(max. vent weight 80 -- 160 kg)Vent sizes below the line are structurallyadequate.
Diagramm zur Ermittlung der Flügelgrößen: Schüco ASS 43 SC (Profile 148 760)Chart for calculating vent sizes: Schüco ASS 43 SC (profiles 148 760)
StatischeBelastungStructuralloading
0,4 kN/m2
0,8 kN/m2
1,2 kN/m2
h (m)
b / w (m)
h (m)
b / w (m)
| 169SchücoDiagrammeCharts
ohne Statikpfosten
without structural
mullion
mit Statikpfosten
with structural
mullion
Diagramm zur Ermittlung der Flügelgrößen: Schüco ASS 48 (Profil 148 750)Chart for calculating vent sizes: Schüco ASS 48 (profile 148 750)
Schüco-Schiebefenster und -türen(max. Flügelgewicht 80 -- 160 kg)Flügelgrößen, die unterhalb der Kurveliegen, sind statisch ausreichend.
Schüco sliding windows and doors(max. vent weight 80 -- 160 kg)Vent sizes below the line are structurallyadequate.
StatischeBelastungStructuralloading
0,4 kN/m2
0,8 kN/m2
1,2 kN/m2
h (m)
b / w (m)
|170 Schüco DiagrammeCharts
Schüco ASS 100 PS.HI
Randbedingungen der Diagrammermittlung:D DIN 1055, Teil 4 für den Gebäude-NormalbereichD Durchbiegungsberechnung: L/200 bzw. max. 15 mm
Parameters of chart calculations:D DIN 1055, Part 4 for standard building areasD Deflection calculation: L/200 or max. 15 mm
b / wFestfeldFixed light
b / wFlügelfeld
Opening vent
h
b / w (m)
h (m)
Diagramm zur Ermittlung der Flügelgrößen: Schüco ASS 100 PS.HIChart for calculating vent sizes: Schüco ASS 100 PS.HI
0 -- 8 m
8 -- 20 m
EinbauhöheInstallationheight
StatischeBelastungStructuralloading
0,5 kN/m2
0,8 kN/m2
Fensterhöhe : Fensterbreite≤ 2,5 : 1Flügelgrößen, die unterhalb der Kurveliegen, sind statisch vordimensioniertHinweis: Sie Statik-Diagramme ersetzenkeine statische Berechnung!
Window height : window width≤ 2.5 : 1Vent sizes below the line are subject topreliminary structural calculations.Note: Statics charts are no substitutefor structural calculations.
Isolierglas
Double glazing
20 -- 100 m 1,1 kN/m2
| 171SchücoDiagrammeCharts
Schüco ASS 50.NI
Diagramm zur Ermittlung der Flügelgrößen: Schüco ASS 50.NI(Profile 148 180 / 148 190)Chart for calculating vent sizes: Schüco ASS 50.NI(profiles 148 180 / 148 190)
b / w (m)
h (m)
Schüco-Schiebe- und Hebeschiebetür(max. Flügelgewicht 150 kg)Flügelgrößen, die unterhalb der Kurveliegen, sind statisch ausreichend.
Schüco sliding and lift-and-slide door(max. vent weight 150 kg)Vent sizes below the line are structurallyadequate.
Isolierglas
Double glazing
0 -- 8 m
8 -- 20 m
EinbauhöheInstallationheight
StatischeBelastungStructuralloading
0,5 kN/m2
0,8 kN/m2
|172 Schüco DiagrammeCharts
Schüco ASS 50
Diagramme zur Ermittlung der Flügelgrößen Schüco ASS 50Profilauswahl für Flügelgewicht bis 150 kg (Basis: Profil 148 310)Charts for calculating vent sizes: Schüco ASS 50Profile selection for vent weight up to 150 kg (base: profile 148 310)
b / w (m)
b / w (m)
b / w (m)
h (m)
h (m)
h (m)
0 -- 8 m
8 -- 20 m
EinbauhöheInstallation height
Statische BelastungStructural loading
0,5 kN/m2
0,8 kN/m2
20 -- 100 m 1,1 kN/m2
Flügelgrößen, die unterhalb der Kurve
liegen, sind statisch ausreichend.
Vent sizes below the line are structurally
adequate.
Isolierglas / Double glazing
| 173SchücoDiagrammeCharts
Diagramme zur Ermittlung der Flügelgrößen Schüco ASS 50Profilauswahl für Flügelgewicht bis 150 kg (Basis: Profil 148 350)Charts for calculating vent sizes: Schüco ASS 50Profile selection for vent weight up to 150 kg (base: profile 148 350)
b / w (m)
b / w (m)
h (m)
h (m)
Flügelgrößen, die unterhalb der Kurve
liegen, sind statisch ausreichend.
Vent sizes below the line are structurally
adequate.
Isolierglas / Double glazing
0 -- 8 m
8 -- 20 m
EinbauhöheInstallation height
Statische BelastungStructural loading
0,5 kN/m2
0,8 kN/m2
20 -- 100 m 1,1 kN/m2
|174 Schüco DiagrammeCharts
Diagramme zur Ermittlung der Flügelgrößen Schüco ASS 50Profilauswahl für Flügelgewicht bis 300 kg (Basis: Profil 148 330)Charts for calculating vent sizes: Schüco ASS 50Profile selection for vent weight up to 300 kg (base: profile 148 330)
b / w (m)
b / w (m)
b / w (m)
h (m)
h (m)
h (m)
Flügelgrößen, die unterhalb der Kurve
liegen, sind statisch ausreichend.
Vent sizes below the line are structurally
adequate.
Isolierglas / Double glazing
0 -- 8 m
8 -- 20 m
EinbauhöheInstallation height
Statische BelastungStructural loading
0,5 kN/m2
0,8 kN/m2
20 -- 100 m 1,1 kN/m2
Schüco ASS 50
| 175SchücoDiagrammeCharts
Diagramme zur Ermittlung der Flügelgrößen Schüco ASS 50Profilauswahl für Flügelgewicht bis 300 kg (Basis: Profil 148 370)Charts for calculating vent sizes: Schüco ASS 50Profile selection for vent weight up to 300 kg (base: profile 148 370)
b / w (m)
b / w (m)
b / w (m)
h (m)
h (m)
h (m)
Flügelgrößen, die unterhalb der Kurve
liegen, sind statisch ausreichend.
Vent sizes below the line are structurally
adequate.
Isolierglas / Double glazing
0 -- 8 m
8 -- 20 m
EinbauhöheInstallation height
Statische BelastungStructural loading
0,5 kN/m2
0,8 kN/m2
20 -- 100 m 1,1 kN/m2
|176 Schüco DiagrammeCharts
Schüco ASS 70.HI
Diagramme zur Ermittlung der Flügelgrößen Schüco ASS 70.HIProfilauswahl für Flügelgewicht bis 150 kg / Flügel mit schubfestem Verbund 148 510 / 148 590Charts for calculating vent sizes: Schüco ASS 70.HIProfile selection for vent weight up to 150 kg / Vent with fixed insulating bar 148 510 / 148 590
Flügelgrößen, die unterhalb der Kurve
liegen, sind statisch ausreichend.
Vent sizes below the line are structurally
adequate.
Isolierglas / Double glazing
b / w (m)
b / w (m)
b / w (m)
0 -- 8 m
8 -- 20 m
EinbauhöheInstallation height
Statische BelastungStructural loading
0,5 kN/m2
0,8 kN/m2
20 -- 100 m 1,1 kN/m2
| 177SchücoDiagrammeCharts
Flügelgrößen, die unterhalb der Kurve
liegen, sind statisch ausreichend.
Vent sizes below the line are structurally
adequate.
Isolierglas / Double glazing
b / w (m)
b / w (m)
b / w (m)
h (m)
h (m)
h (m)
0 -- 8 m
8 -- 20 m
EinbauhöheInstallation height
Statische BelastungStructural loading
0,5 kN/m2
0,8 kN/m2
20 -- 100 m 1,1 kN/m2
|178 Schüco DiagrammeCharts
Schüco ASS 70.HI
Diagramme zur Ermittlung der Flügelgrößen Schüco ASS 70.HIProfilauswahl für Flügelgewicht bis 150 kg / Flügel mit schublosem Verbund 148 530 / 148 610Charts for calculating vent sizes: Schüco ASS 70.HIProfile selection for vent weight up to 150 kg / Vent with split insulating bar 148 530 / 148 610
b / w (m)
b / w (m)
b / w (m)
h (m)
h (m)
h (m)
Flügelgrößen, die unterhalb der Kurve
liegen, sind statisch ausreichend.
Vent sizes below the line are structurally
adequate.
Isolierglas / Double glazing
0 -- 8 m
8 -- 20 m
EinbauhöheInstallation height
Statische BelastungStructural loading
0,5 kN/m2
0,8 kN/m2
20 -- 100 m 1,1 kN/m2
| 179SchücoDiagrammeCharts
b / w (m)
b / w (m)
b / w (m)
h (m)
h (m)
h (m)
Flügelgrößen, die unterhalb der Kurve
liegen, sind statisch ausreichend.
Vent sizes below the line are structurally
adequate.
Isolierglas / Double glazing
0 -- 8 m
8 -- 20 m
EinbauhöheInstallation height
Statische BelastungStructural loading
0,5 kN/m2
0,8 kN/m2
20 -- 100 m 1,1 kN/m2
|180 Schüco DiagrammeCharts
Schüco ASS 70.HI
Diagramme zur Ermittlung der Flügelgrößen Schüco ASS 70.HIProfilauswahl für Flügelgewicht bis 300 kg / Flügel mit schublosem Verbund 148 550 / 148 630Charts for calculating vent sizes: Schüco ASS 70.HIProfile selection for vent weight up to 300 kg / Vent with split insulating bar 148 550 / 148 630
Flügelgrößen, die unterhalb der Kurve
liegen, sind statisch ausreichend.
Vent sizes below the line are structurally
adequate.
Isolierglas / Double glazing
b / w (m)
b / w (m)
b / w (m)
h (m)
h (m)
h (m)
0 -- 8 m
8 -- 20 m
EinbauhöheInstallation height
Statische BelastungStructural loading
0,5 kN/m2
0,8 kN/m2
20 -- 100 m 1,1 kN/m2
| 181SchücoDiagrammeCharts
Flügelgrößen, die unterhalb der Kurve
liegen, sind statisch ausreichend.
Vent sizes below the line are structurally
adequate.
Isolierglas / Double glazing
b / w (m)
b / w (m)
b / w (m)
h (m)
h (m)
h (m)
0 -- 8 m
8 -- 20 m
EinbauhöheInstallation height
Statische BelastungStructural loading
0,5 kN/m2
0,8 kN/m2
20 -- 100 m 1,1 kN/m2
|182 Schüco DiagrammeCharts
Schüco ASS 70.HI
Diagramme zur Ermittlung der Flügelgrößen Schüco ASS 70.HIProfilauswahl für Flügelgewicht bis 300 kg / Flügel mit schublosem Verbund 148 570 / 148 650Charts for calculating vent sizes: Schüco ASS 70.HIProfile selection for vent weight up to 300 kg / Vent with split insulating bar 148 570 / 148 650
Flügelgrößen, die unterhalb der Kurve
liegen, sind statisch ausreichend.
Vent sizes below the line are structurally
adequate.
Isolierglas / Double glazing
b / w (m)
b / w (m)
b / w (m)
h (m)
h (m)
h (m)
0 -- 8 m
8 -- 20 m
EinbauhöheInstallation height
Statische BelastungStructural loading
0,5 kN/m2
0,8 kN/m2
20 -- 100 m 1,1 kN/m2
| 183SchücoDiagrammeCharts
Flügelgrößen, die unterhalb der Kurve
liegen, sind statisch ausreichend.
Vent sizes below the line are structurally
adequate.
Isolierglas / Double glazing
b / w (m)
b / w (m)
b / w (m)
h (m)
h (m)
h (m)
0 -- 8 m
8 -- 20 m
EinbauhöheInstallation height
Statische BelastungStructural loading
0,5 kN/m2
0,8 kN/m2
20 -- 100 m 1,1 kN/m2
|184 Schüco DiagrammeCharts
Schüco ASS 50 FD.NI
Typ 3
Type 3
Typ 5
Type 5
5 5
1 12 2
Typ 4
Type 4
1 12
190 190
330190 190
5
470Typ 6
Type 6 Typ 7
Type 7
Schüco ASS 70 FD
Die Mindestflügelbreite bei Einsatz vonintegrierten Dk-Flügeln beträgt 634 mm.The minimum vent width for usingintegrated turn/tilt vents is 634 mm.
* Für die Schlagregendichtheit Klasse 9A / EN 12208muss Blendrahmen 372 090 eingesetzt werdenFor weathertightness class 9A / EN 12208,outer frame 372 090 must be used.
PASK Fenster bzw. TürenTilt/slide windows or doors
PASK Beschlag ohne Zwangsan- und abdruck bis 130 kg Flügelgewicht, bis WK1Tilt/slide fittings without engagement mechanism for vent weights up to 130 kg, up to WK1
Profilgruppe VProfile group V
Profilgruppe IVProfile group IV
IV
Profilgruppe III+III.AProfile groups III+III.A
Profilgruppe III+III.A(Basissicherheit)Profile groups III+III.A(basic security)
IV+V
Die Zuordnung der Profilgruppen zuden Flügelprofilen entnehmen Sie bitteden ProfilübersichtenSee the summary of profiles for a list ofprofile groups for vent profiles.
Flügelbreite (b), cm / Vent width (w), cm
Flügelhöhe(h),cm
/Ventheight(h),cm
Profil-gruppeProfilegroup
III.A
WK1III
IV
V
III.A Basis-sicherheitBasicsecurity
III
IV
V
Widerstands-klasseResistanceclass
max. Flügel-gewichtMax. ventweight
130 kg
Einbauhöhe 0-20 mInstallation height 0 -- 20 m
|186 Schüco DiagrammeCharts
PASK Fenster bzw. Türen (mit Stulp)Tilt/slide windows or doors (with meeting stile)
PASK Beschlag mit Zwangsan- und abdruck bis 200 kg, WK1Tilt/slide fittings with engagement mechanism for vent weights up to 200 kg, WK1
Die Zuordnung der Profilgruppen zuden Flügelprofilen entnehmen Sie bitteden ProfilübersichtenSee the summary of profiles for a list ofprofile groups for vent profiles.
| 187SchücoDiagrammeCharts
PASK Fenster bzw. Türen (ohne Stulp)Tilt/slide windows or doors (without meeting stile)
PASK Beschlag mit Zwangsan- und abdruck bis 150 kg Flügelgewicht, bis WK1Tilt/slide fittings with engagement mechanism for vent weights up to 150 kg, up to WK1
Profilgruppe III+III.A(Basissicherheit)Profile groups III+III.A(basic security)
IV V
IV
Profilgruppe III+III.AProfile groups III+III.A
Die Zuordnung der Profilgruppen zu den Flügelprofilenentnehmen Sie bitte den ProfilübersichtenSee the summary of profiles for a list of profile groups forvent profiles.
Einbauhöhe 0-100 mInstallation height 0 -- 100 m
Profilgruppe V / Profile group VAb Einbauhöhe 20 m H < 225 cm
PASK Fenster bzw. Türen (mit Stulp)Tilt/slide windows or doors (with meeting stile)
PASK Beschlag mit Zwangsan- und abdruck bis 150 kg Flügelgewicht, bis WK1Tilt/slide fittings with engagement mechanism for vent weights up to 150 kg, up to WK1
Die Zuordnung der Profilgruppen zuden Flügelprofilen entnehmen Sie bitteden ProfilübersichtenSee the summary of profiles for a list ofprofile groups for vent profiles.
PASK Beschlag mit Zwangsan- und abdruck bis 180 kg Flügelgewicht, bis WK1Tilt/slide fittings with engagement mechanism for vent weights up to 180 kg, up to WK1
Einbauhöhe 0-20 mInstallation height 0 -- 20 m
Profilgruppe VProfile group V
Profilgruppe III.AProfile group III.A IV V
V
IVProfilgruppe IVProfile group IV
Profilgruppe IIIProfile group III
grau gekennzeichneter Bereich = Basissicherheit
Shaded area = basic security
Flügelhöhe(h),cm
/Ventheight(h),cm
Flügelbreite (b), cm / Vent width (w), cm
Profil-gruppeProfilegroup
WK1
III
IV
V
Basis-sicherheitBasicsecurity
III
IV
V
Widerstands-klasseResistanceclass
maximalesFlügelgewichtMax. ventweight
180 kg
Die Zuordnung der Profilgruppen zuden Flügelprofilen entnehmen Sie bitteden ProfilübersichtenSee the summary of profiles for a list ofprofile groups for vent profiles.
|190 Schüco DiagrammeCharts
PASK Fenster bzw. Türen (ohne Stulp)Tilt/slide windows or doors (without meeting stile)
PASK Beschlag mit Zwangsan- und abdruck bis 180 kg Flügelgewicht, bis WK1Tilt/slide fittings with engagement mechanism for vent weights up to 180 kg, up to WK1
Einbauhöhe 0-100 mInstallation height 0 -- 100 m
IV V
grau gekennzeichneter Bereich = Basissicherheit
Shaded area = basic security
Profilgruppe IIIProfile group III
Profilgruppe IVAb Einbauhöhe 20 m b < 160 cmProfile group IVFor installation heights over20 m w < 160 cm
Profilgruppe VAb Einbauhöhe 20 m b < 180 cm, h < 240 cmProfile group VFor installation heightsover 20 m w < 180 cm, h < 240 cm
IV
V
Profilgruppe IIIProfile group III
Die Zuordnung derProfilgruppen zuden Flügelprofilenentnehmen Sie bitteden ProfilübersichtenSee the summary ofprofiles for a list ofprofile groups for ventprofiles.
PASK Beschlag mit Zwangsan- und abdruck bis 180 kg Flügelgewicht, WK2Tilt/slide fittings with engagement mechanism for vent weights up to 180 kg, WK2
Einbauhöhe 0-20 mInstallation height 0 -- 20 m
Profil-gruppeVProfilegroupV
Profilgruppe IVProfile group IV
Profilgruppe IIIProfile group III
Flügelhöhe(h),cm
/Ventheight(h),cm
Flügelbreite (b), cm / Vent width (w), cm
Profil-gruppeProfilegroup
WK2
III
IV
V
Widerstands-klasseResistanceclass
maximalesFlügelgewichtMax. ventweight
180 kg
Die Zuordnung der Profilgruppen zuden Flügelprofilen entnehmen Sie bitteden ProfilübersichtenSee the summary of profiles for a list ofprofile groups for vent profiles.
|192 Schüco DiagrammeCharts
PASK Fenster bzw. Türen (ohne Stulp)Tilt/slide windows or doors (without meeting stile)
Profilgruppe IIIAb Einbauhöhe 20 mb < 180 cmProfile group IIIFor installation heightsover 20 m w < 180 cm
Profilgruppe IVAb Einbauhöhe 20 m b < 190 cmProfile group IVFor installation heights over20 m w < 190 cm
Profilgruppe VAb Einbauhöhe 20 m b < 200 cm, h < 240 cmProfile group VFor installation heightsover 20 m w < 200 cm, h < 240 cm
V
IV
Einbauhöhe 0-100 mInstallation height 0 -- 100 m
III
Die Zuordnung derProfilgruppen zuden Flügelprofilenentnehmen Sie bitteden ProfilübersichtenSee the summary ofprofiles for a list ofprofile groups for ventprofiles.
Flügelhöhe(h),cm
/Ventheight(h),cm
PASK Beschlag mit Zwangsan- und abdruck bis 200 kg Flügelgewicht, bis WK1Tilt/slide fittings with engagement mechanism for vent weights up to 200 kg, up to WK1
Flügelbreite (b), cm / Vent width (w), cm
Profil-gruppeProfilegroup
III.A
WK1III
IV
V
III.A Basis-sicherheitBasicsecurity
III
IV
V
Widerstands-klasseResistanceclass
maximalesFlügelgewichtMax. ventweight
200 kg
| 193SchücoDiagrammeCharts
PASK Beschlag mit Zwangsan- und abdruck bis 200 kg Flügelgewicht, WK2Tilt/slide fittings with engagement mechanism for vent weights up to 200 kg, WK2
Die Zuordnung der Profilgruppen zuden Flügelprofilen entnehmen Sie bitteden ProfilübersichtenSee the summary of profiles for a list ofprofile groups for vent profiles.
|194 Schüco ProfilübersichtenSummary of profiles
Schüco ASS 32.NI
323 390
FlügelrahmenVent frames
GrundprofileBasic profiles
308 220
308 230
308 040
308 240
308 270
308 256
199 460
ZusatzprofileSupplementary profiles
199 450
308 260
Maßstab 1:2
Scale 1:2
| 195SchücoProfilübersichtenSummary of profiles
199 450 38 182 1.77 1.68
110 505 18.75 20.93
84 552 8.12 56.41
83 428 5.91 21.60
89 320 5.32 18.69
ProfilArt.-Nr.ProfileArt. No.
Abwicklung(mm)
Circumference(mm) Ix
(cm4)pol.pol.
uml.total
TrägheitsmomentMoment of inertia
Iy(cm4)
199 460
308 040
308 220
308 230
308 240
308 256
308 260
308 270
323 390
347 260
347 260 347 270347 260
ZusatzprofileSupplementary profiles
WetterschenkelWeather bars
309 200 309 190
184 430
184 450
184 440
184 460
LaufschienenTracks
202 428308 130
347 270
184 430
184 440
184 450
184 460
202 428
308 130
309 190
309 200
128 396 5.22 11.47
— — — —
105 268 3.68 7.26
35 108 — —
29.5 86 — —
32 102 — —
22 70 — —
25 71 — —
35 91 — —
45 111 — —
55 131 — —
— — — —
— 48
32 99 — —
46 117 — —
— —
Maßstab 1:2
Scale 1:2
|196 Schüco ProfilübersichtenSummary of profiles
Schüco ASS 28 SC.NI / 32 SC.NI
GrundprofileBasic profiles
308 010 308 030
308 020 308 050
308 140
308 040
308 190
176 620
Maßstab 1:2
Scale 1:2
| 197SchücoProfilübersichtenSummary of profiles
129 560 30 78 — —
40 98 — —
ProfilArt.-Nr.ProfileArt. No.
Abwicklung(mm)
Circumference(mm) Ix
(cm4)pol.pol.
uml.total
TrägheitsmomentMoment of inertia
Iy(cm4)
129 570
ZusatzprofileSupplementary profiles
WetterschenkelWeather bars
309 200 309 190
184 430
184 450
184 440
184 460
LaufschienenTracks
202 428308 130
184 430
184 440
184 450
184 460
202 428
309 190
309 200
25 71 — —
35 91 — —
45 111 — —
55 131 — —
— — — —
48 99
46 117 — —
— —
129 560
129 570
129 580
50 118 — —129 580
308 130 48 — — —
Maßstab 1:2
Scale 1:2
176 620 12 46 — —
158 445 20.34 6.42308 020
308 030
308 040
308 050
308 140
308 190
76 349 11.94 4.97
84 552 56.41 8.12
79 492 28.11 9.54
53 375 22.62 7.25
32 225 — —
84 374 13.36 5.69308 010
|198 Schüco ProfilübersichtenSummary of profiles
Nur für Schüco ASS 28 SC.NIFor Schüco ASS 28 SC.NI only
GrundprofileBasic profiles
133 300 114 245 3.03 5.55
108 268 3.25 5.29
ProfilArt.-Nr.ProfileArt. No.
Abwicklung(mm)
Circumference(mm) Ix
(cm4)pol.pol.
uml.total
TrägheitsmomentMoment of inertia
Iy(cm4)
308 060
308 070
308 080
309 210
309 220
67 203 3.72 1.96
88 223 8.22 3.04
37 109 — —
122 252 13.85 3.78
— — — —133 516
308 070
309 220
133 600 133 300
308 060
309 210133 516
308 080
114 322 2.74 5.95133 600
Maßstab 1:2
Scale 1:2
| 199SchücoProfilübersichtenSummary of profiles
Nur für Schüco ASS 32 SC.NIFor Schüco ASS 32 SC.NI only
Anschlussprofile für FensterfußpunkteAttachment profiles for window sills
184 800
184 480 189 920
139 090
110 210
372 020 119 340 32.41 46.10
372 030 208 584 84.58 117.60
372 040 234 645 84.58 117.60
Maßstab 1:2
Scale 1:2
|206 Schüco ProfilübersichtenSummary of profiles
Schüco ASS 50.NI
Grundprofile (Schiebe- bzw. Hebeschiebeanlagen)Basic profiles (sliding or lift-and-slide systems)
max. Flügelgewicht 150 kgMax. vent weight 150 kg
148 170
303 620 190 620
z 190 360
202 438
" 365 350
Zusatzprofile (Schiebe- bzw. Hebeschiebeanlagen)Supplementary profiles (sliding or lift-and-slide systems)
Maßstab 1:2
Scale 1:2
| 207SchücoProfilübersichtenSummary of profiles
148 170 55 573 104.29 6.59
71 362 13.71 9.66
ProfilArt.-Nr.ProfileArt. No.
Abwicklung(mm)
Circumference(mm) Ix
(cm4)pol.pol.
uml.total
TrägheitsmomentMoment of inertia
Iy(cm4)
148 190
190 620
202 438
303 620
365 350
— 122 — —
— — — —
32 90 — —
156 441 24.08 33.88
22 160 — —190 360
148 190
Profile für Mittelpunkt 4(Schiebe- bzw. Hebeschiebeanlagen)max. Flügelgewicht 150 kgProfiles for interlock stile 4(sliding or lift-and-slide systems)max. vent weight 150 kg