Top Banner
Technician License Course Chapter 2 Lesson Plan Module 3 – Radio Equipment Basics
17

Technician License Course Chapter 2 Lesson Plan Module 3 – Radio Equipment Basics.

Jan 17, 2016

Download

Documents

Beryl Reed
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: Technician License Course Chapter 2 Lesson Plan Module 3 – Radio Equipment Basics.

Technician License CourseChapter 2

Lesson Plan Module 3 –

Radio Equipment Basics

Page 2: Technician License Course Chapter 2 Lesson Plan Module 3 – Radio Equipment Basics.

The Basic Radio Station

Page 3: Technician License Course Chapter 2 Lesson Plan Module 3 – Radio Equipment Basics.

Basic Station Organization

• Station Equipment– Receiver– Transmitter– Antenna– Power Supply

• Accessory Station Equipment• Microphones, speakers, Morse Code keys

Page 4: Technician License Course Chapter 2 Lesson Plan Module 3 – Radio Equipment Basics.

Transmit/Receive (TR) Switch

• If the station antenna is shared between the transmitter and receiver, the TR switch allows the antenna to be switched to the transmitter when sending and to the receiver when receiving.– In a transceiver, this TR switch is inside the unit and

requires no attention by the operator.

Page 5: Technician License Course Chapter 2 Lesson Plan Module 3 – Radio Equipment Basics.

Special Stations You Will Use (Repeaters)

• Repeaters are automated stations located at high places that receive and then retransmit your signal – simultaneously.– Dramatically improves range of low power or

mobile stations.

• The basic components of a repeater are the same as your station: receiver, transmitter, antenna and power supply.

Page 6: Technician License Course Chapter 2 Lesson Plan Module 3 – Radio Equipment Basics.

Repeaters

• But, repeaters are transmitting and receiving at the same time using the same antenna.

• This requires a very high quality and specialized filter to prevent the transmitted signal from overpowering the receiver.

• This specialized filter is called a duplexer.

Page 7: Technician License Course Chapter 2 Lesson Plan Module 3 – Radio Equipment Basics.

Repeaters

• Repeater Station Equipment– Receiver– Transmitter– Antenna– Power Supply– Duplexer– Controller

Page 8: Technician License Course Chapter 2 Lesson Plan Module 3 – Radio Equipment Basics.

Repeater

Page 9: Technician License Course Chapter 2 Lesson Plan Module 3 – Radio Equipment Basics.

Basic Station Accessories

• Human interface accessories:– Microphones– Speakers– Earphones– Computer– Morse code key– TV camera– Etc.

• Station performance accessories:– Antenna tuner– SWR meter (antenna

match checker)– Amplifier– Antenna rotator

(turning antenna)– Filters– Etc.

Page 10: Technician License Course Chapter 2 Lesson Plan Module 3 – Radio Equipment Basics.

Accessory Equipment

Page 11: Technician License Course Chapter 2 Lesson Plan Module 3 – Radio Equipment Basics.

What type of amateur station simultaneously retransmits the signal of another amateur

station on a different channel or channels? (T1F09)

• A. Beacon station

• B. Earth station

• C. Repeater station

• D. Message forwarding station

Page 12: Technician License Course Chapter 2 Lesson Plan Module 3 – Radio Equipment Basics.

What type of amateur station simultaneously retransmits the signal of another amateur

station on a different channel or channels? (T1F09)

• A. Beacon station

• B. Earth station

• C. Repeater station

• D. Message forwarding station

Page 13: Technician License Course Chapter 2 Lesson Plan Module 3 – Radio Equipment Basics.

What could be used in place of a regular speaker to help you copy signals in a noisy

area? (T4A02)

• A. A video display

• B. A low pass filter

• C. A set of headphones

• D. A boom microphone

Page 14: Technician License Course Chapter 2 Lesson Plan Module 3 – Radio Equipment Basics.

What could be used in place of a regular speaker to help you copy signals in a noisy

area? (T4A02)

• A. A video display

• B. A low pass filter

• C. A set of headphones

• D. A boom microphone

Page 15: Technician License Course Chapter 2 Lesson Plan Module 3 – Radio Equipment Basics.

If Figure T5 represents a transceiver in which block 1 is the transmitter portion and block 3 is the receiver portion, what is the function of block 2?

(T7A07)

• A. A balanced modulator• B. A transmit-receive switch• C. A power amplifier• D. A high-pass filter

Page 16: Technician License Course Chapter 2 Lesson Plan Module 3 – Radio Equipment Basics.

If Figure T5 represents a transceiver in which block 1 is the transmitter portion and block 3 is the receiver portion, what is the function of block 2?

(T7A07)

• A. A balanced modulator• B. A transmit-receive switch• C. A power amplifier• D. A high-pass filter

Page 17: Technician License Course Chapter 2 Lesson Plan Module 3 – Radio Equipment Basics.

• Reading Assignment: Chapter 3