This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Technical Specifications
325Hydraulic Excavator
Configurations and features may vary by region. Please consult your Cat® dealer for availability in your area.
• Meets U.S. EPA Tier 4 Final emission standards.• Recommended for use up to 4500 m (14,760 ft) altitude with
engine power derate above 3000 m (9,840 ft).• Net power is tested per ISO 9249. Standards in effect at the time
of manufacture.• Net power advertised is the power available at the flywheel when
the engine is equipped with fan, air intake system, exhaust system and alternator.
• Rated speed at 2,200 rpm.(1) Cat engines are compatible with the following renewable, alternative,
and bio-fuels* with lower greenhouse gas emission impact: Up to B20 biodiesel (FAME)** Up to 100% HVO and GTL renewable fuels* Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
** For use of higher blends, consult your Cat dealer.
Swing Mechanism
Swing Speed 11.1 rpm
Maximum Swing Torque 82 kN·m 60,300 lbf-ft
Weights
Operating Weight 26 100 kg 57,500 lb
• Long undercarriage, Reach boom, R2.9B1 (9'6") stick, HD 1.19 m3 (1.56 yd3) bucket, 600 mm (24") HD triple grouser shoes and 4.9 mt (10,800 lb) counterweight + blade.
Operating Weight 26 700 kg 58,900 lb
• Long undercarriage, Reach boom, R2.9B1 (9'6") stick, GD 1.30 m3 (1.7 yd3) bucket, 790 mm (31") HD triple grouser shoes and 6.7 mt (14,770 lb) counterweight.
Operating Weight 28 400 kg 62,600 lb
• Long undercarriage, Reach boom, R2.9B1 (9'6") stick, HD 1.19 m3 (1.56 yd3) bucket, 790 mm (31") HD triple grouser shoes and 8.3 mt (18,300 lb) counterweight.
Track
Optional Track Shoes Width 600 mm 24 in
Optional Track Shoes Width 790 mm 31 in
Number of Shoes (each side) 49
Number of Track Rollers (each side) 8
Number of Carrier Rollers (each side) 2
Drive
Gradeability 35°/70%
Maximum Travel Speed 5.7 km/h 3.5 mph
Maximum Drawbar Pull 201 kN 45,232 lbf
Hydraulic System
Main System – Maximum Flow – Implement
429 L/min 113 gal/min
Maximum Pressure – Equipment – Implement
35 000 kPa 5,075 psi
Maximum Pressure – Equipment – Heavy Lift Mode/Auto Dig Boost
38 000 kPa 5,510 psi
Maximum Pressure – Travel 34 000 kPa 4,930 psi
Maximum Pressure – Swing 27 500 kPa 3,988 psi
Boom Cylinder – Bore 125 mm 5 in
Boom Cylinder – Stroke 1410 mm 56 in
Stick Cylinder – Bore 140 mm 6 in
Stick Cylinder – Stroke 1504 mm 59 in
Bucket Cylinder – Bore 120 mm 5 in
Bucket Cylinder – Stroke 1104 mm 43 in
Service Refill Capacities
Fuel Tank Capacity 313 L 82.7 gal
Cooling System 12 L 3.1 gal
Engine Oil (with filter) 15 L 4.0 gal
Swing Drive 12 L 3.2 gal
Final Drive (each) 4 L 1.1 gal
Hydraulic System (including tank) 230 L 60.8 gal
Hydraulic Tank (including suction pipe)
111 L 29.3 gal
DEF Tank 26 L 6.9 gal
Standards
Brakes ISO 10265:2008
Cab/ROPS ISO 12117-2:2008
FOGS (optional) ISO 10262:1998 Level II
Sound Performance
ISO 6395 (external) 97 dB(A)
ISO 6396 (inside cab) 70 dB(A)
• When properly installed and maintained, the cab offered by Caterpillar, when tested with doors and windows closed according to ANSI/SAE J1166 OCT98, meets OSHA and MSHA requirements for operator sound exposure limits in effect at time of manufacture.
• Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.
325 Hydraulic Excavator Specifications
3
325 Hydraulic Excavator Specifications
Operating Weights and Ground Pressures
600 mm (24 in) HD Triple Grouser Shoes
790 mm (31 in) HD Triple Grouser Shoes
Weight Ground Pressure Weight Ground PressureBase Frame with Track Rollers and Carrier Rollers
Base Machine with 4.9 mt (10,800 lb) Counterweight and Long UndercarriageReach Boom + R2.9B1 (9'6") Stick + 1.19 m3 (1.56 yd3) HD Bucket + Blade + AUX lines (HP + QC)
26 100 kg (57,500 lb)
54.3 kPa (7.9 psi)
26 800 kg (59,000 lb)
42.3 kPa (6.1 psi)
Base Machine with 6.7 mt (14,770 lb) Counterweight and Long UndercarriageReach Boom + R2.9B1 (9'6") Stick + GD 1.30m3 (1.7 yd3) Bucket + AUX lines (HP + QC)
26 000 kg (57,300 lb)
54.1 kPa (7.8 psi)
26 700 kg (58,900 lb)
42.2 kPa (6.1 psi)
Base Machine with 8.3 mt (18,300 lb) Counterweight and Long Undercarriage Reach Boom + R2.9B1 (9'6") Stick + 1.19 m3 (1.56 yd3) HD Bucket + AUX lines (HP + QC)
27 700 kg (61,100 lb)
57.6 kPa (8.4 psi)
28 400 kg (62,600 lb)
44.9 kPa (6.5 psi)
All operating weights include a 90% fuel tank with 75 kg (165 lb) operator .
Major Component Weights
kg lbBase Machine Weight (including upperframe, long undercarriage, boom cylinders, without boom, stick, bucket, stick cylinder, bucket cylinder, tracks, blade, fuel, operator)
With 4.9 mt (10,800 lb) Counterweight (for use with Blade) 17 490 38,500With 6.7 ton (14,770) Counterweight 18 690 41,200With 8.3 mt (18,300 lb) Counterweight 20 250 44,600
Track Shoes:600 mm (24") Width, 12.5 mm (0.49") Thick, HD Triple Grouser Track Shoes 3190 7,000790 mm (31") Width, 12.5 mm (0.49") Thick, HD Triple Grouser Track Shoes with Step Extension for ISO 2867
3860 8,500
Two Boom Cylinders 420 900Weight of 90% Fuel Tank and 75 kg (165 lb) Operator 310 700Blades (including lines, cylinders, frame modifications):
2980 mm (9'9") Width, suitable for use with 4.9 mt (10,800 lb) Counterweight and 600 mm (24") Width Track Shoes
1090 2,400
3170 mm (10'5") Width, suitable for use with 4.9 mt (10,800 lb) Counterweight and 790 mm (31") Width Track Shoes
–10.0 ft lb *28,950 *28,950 *34,150 *34,150 *24,600 17,950 *18,150 12,100 *15,650 10,700 22.50–4 .5 m kg *11 800 *11 800 *8600 *8600 *6850 *6850 5 .32
–15.0 ft lb *25,100 *25,100 *18,100 *18,100 *14,950 *14,950 17.50
ISO 10567
* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load . The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007 . They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load . Weight of all lifting accessories must be deducted from the above lifting capacities . Lifting capacities are based on the machine standing on a firm, uniform supporting surface . The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance .
Lift capacity stays with ±5% for all available track shoes .
Always refer to the appropriate Operation and Maintenance Manual for specific product information .
Reach Boom Lift Capacities – Counterweight: 8.3 mt (18,300 lb) – without Bucket, Heavy Lift: On
2.9 m (9'6") 5.7 m (18'8") 600 mm (24") HD Triple Grouser Shoes (Long Undercarriage)
3646 mm (12'0")
R2.9B1 TRS
2380 mm (7'8") 4455 mm (14'6")
1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft
m ft
9 .0 m kg *5000 *5000 4 .5030.0 ft lb *11,300 *11,300 14.177 .5 m kg *6100 *6100 *5300 *5300 *4200 *4200 6 .28
25.0 ft lb *13,500 *13,500 *10,050 *10,050 *9,300 *9,300 20.836 .0 m kg *6600 *6600 *6350 *6350 *3900 *3900 7 .35
20.0 ft lb *14,350 *14,350 *13,850 13,650 *8,650 *8,650 24.174 .5 m kg *10 600 *10 600 *8100 *8100 *6950 6200 *6250 4400 *3850 *3850 8 .00
15.0 ft lb *22,500 *22,500 *17,450 *17,450 *15,100 13,300 *12,650 9,450 *8,500 *8,500 26.673 .0 m kg *10 150 8950 *7900 5950 6750 4300 *3950 3700 8 .33
10.0 ft lb *21,850 19,350 *17,100 12,750 14,500 9,250 *8,700 8,100 27.501 .5 m kg *11 950 8450 *8800 5700 6600 4200 *4250 3600 8 .395.0 ft lb *25,750 18,250 *19,050 12,250 14,250 9,000 *9,300 7,850 27.50
0 m kg *7400 *7400 *12 700 8200 9000 5550 6500 4100 *4700 3650 8 .170 ft lb *16,950 *16,950 *27,500 17,650 19,350 11,900 14,050 8,800 *10,350 8,050 27.50
–10.0 ft lb *28,900 *28,900 *33,750 *33,750 *24,300 17,700 *17,950 11,900 *15,400 10,500 22.50–4 .5 m kg *11 600 *11 600 *8450 *8450 *6750 *6750 5 .32
–15.0 ft lb *24,750 *24,750 *17,850 *17,850 *14,700 *14,700 17.50
ISO 10567
* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load . The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007 . They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load . Weight of all lifting accessories must be deducted from the above lifting capacities . Lifting capacities are based on the machine standing on a firm, uniform supporting surface . The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance .
Lift capacity stays with ±5% for all available track shoes .
Always refer to the appropriate Operation and Maintenance Manual for specific product information .
TRS = Thumb Ready Stick
325 Hydraulic Excavator Specifications
8
Reach Boom Lift Capacities – Counterweight: 8.3 mt (18,300 lb) – without Bucket, Heavy Lift: On
2.9 m (9'6") 5.7 m (18'8") 790 mm (31") HD Triple Grouser Shoes (Long Undercarriage)
3646 mm (12'0")
R2.9B1
2380 mm (7'8") 4455 mm (14'6")
1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft
m ft
9 .0 m kg *5000 *5000 4 .5030.0 ft lb *11,350 *11,350 14.177 .5 m kg *6200 *6200 *5350 *5350 *4200 *4200 6 .28
25.0 ft lb *13,650 *13,650 *10,150 *10,150 *9,350 *9,350 20.836 .0 m kg *6650 *6650 *6400 *6400 *3950 *3950 7 .35
20.0 ft lb *14,500 *14,500 *14,050 *14,050 *8,700 *8,700 24.174 .5 m kg *10 650 *10 650 *8150 *8150 *7050 6400 *6300 4600 *3900 *3900 8 .00
15.0 ft lb *22,700 *22,700 *17,600 *17,600 *15,300 13,750 *12,700 9,850 *8,550 *8,550 26.673 .0 m kg *10 250 9250 *8000 6150 *6900 4500 *4000 3850 8 .33
10.0 ft lb *22,100 19,950 *17,350 13,250 15,000 9,600 *8,800 8,450 27.501 .5 m kg *12 050 8800 *8900 5900 6850 4350 *4250 3750 8 .395.0 ft lb *26,050 18,950 *19,300 12,750 14,750 9,400 *9,350 8,200 27.50
0 m kg *7450 *7450 *12 850 8550 9300 5750 6750 4300 *4750 3850 8 .170 ft lb *17,000 *17,000 *27,800 18,400 20,050 12,400 14,550 9,200 *10,450 8,450 27.50
–10.0 ft lb *28,950 *28,950 *34,150 *34,150 *24,600 18,400 *18,150 12,400 *15,650 10,950 22.50–4 .5 m kg *11 800 *11 800 *8600 *8600 *6850 *6850 5 .32
–15.0 ft lb *25,100 *25,100 *18,100 *18,100 *14,950 *14,950 17.50
ISO 10567
* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load . The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007 . They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load . Weight of all lifting accessories must be deducted from the above lifting capacities . Lifting capacities are based on the machine standing on a firm, uniform supporting surface . The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance .
Lift capacity stays with ±5% for all available track shoes .
Always refer to the appropriate Operation and Maintenance Manual for specific product information .
9
325 Hydraulic Excavator Specifications
325 Hydraulic Excavator Specifications
10
Reach Boom Lift Capacities – Counterweight: 8.3 mt (18,300 lb) – without Bucket, Heavy Lift: On
2.9 m (9'6") 5.7 m (18'8") 790 mm (31") HD Triple Grouser Shoes (Long Undercarriage)
3646 mm (12'0")
R2.9B1 TRS
2380 mm (7'8") 4455 mm (14'6")
1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft
m ft
9 .0 m kg *5000 *5000 4 .5030.0 ft lb *11,300 *11,300 14.177 .5 m kg *6100 *6100 *5300 *5300 *4200 *4200 6 .28
25.0 ft lb *13,500 *13,500 *10,050 *10,050 *9,300 *9,300 20.836 .0 m kg *6600 *6600 *6350 *6350 *3900 *3900 7 .35
20.0 ft lb *14,350 *14,350 *13,850 *13,850 *8,650 *8,650 24.174 .5 m kg *10 600 *10 600 *8100 *8100 *6950 6300 *6250 4500 *3850 *3850 8 .00
15.0 ft lb *22,500 *22,500 *17,450 *17,450 *15,100 13,600 *12,650 9,700 *8,500 *8,500 26.673 .0 m kg *10 150 9150 *7900 6050 *6800 4400 *3950 3750 8 .33
10.0 ft lb *21,850 19,750 *17,100 13,050 *14,800 9,450 *8,700 8,300 27.501 .5 m kg *11 950 8650 *8800 5800 6750 4300 *4250 3650 8 .395.0 ft lb *25,750 18,700 *19,050 12,550 14,550 9,200 *9,300 8,050 27.50
0 m kg *7400 *7400 *12 700 8400 9200 5650 6700 4200 *4700 3750 8 .170 ft lb *16,950 *16,950 *27,500 18,100 19,850 12,200 14,400 9,050 *10,350 8,250 27.50
–10.0 ft lb *28,900 *28,900 *33,750 *33,750 *24,300 18,100 *17,950 12,200 *15,400 10,800 22.50–4 .5 m kg *11 600 *11 600 *8450 *8450 *6750 *6750 5 .32
–15.0 ft lb *24,750 *24,750 *17,850 *17,850 *14,700 *14,700 17.50
ISO 10567
* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load . The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007 . They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load . Weight of all lifting accessories must be deducted from the above lifting capacities . Lifting capacities are based on the machine standing on a firm, uniform supporting surface . The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance .
Lift capacity stays with ±5% for all available track shoes .
Always refer to the appropriate Operation and Maintenance Manual for specific product information .
TRS = Thumb Ready Stick
11
325 Hydraulic Excavator Specifications
Reach Boom Lift Capacities – Counterweight: 6.7 mt (14,770 lb) – without Bucket, Heavy Lift: On
2.9 m (9'6") 5.7 m (18'8") 600 mm (24") HD Triple Grouser Shoes (Long Undercarriage)
3646 mm (12'0")
R2.9B1
2380 mm (7'8") 4455 mm (14'6")
1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft
m ft
9 .0 m kg *5000 *5000 4 .50 30.0 ft lb *11,300 *11,300 14.17 7 .5 m kg *6150 *6150 *5350 *5350 *4200 *4200 6 .28
25.0 ft lb *13,600 *13,600 *10,100 *10,100 *9,300 *9,300 20.83 6 .0 m kg *6650 *6650 *6400 5700 *3900 *3900 7 .35
20.0 ft lb *14,500 *14,500 *14,000 12,300 *8,650 *8,650 24.17 4 .5 m kg *10 650 *10 650 *8150 *8150 *7050 5550 6250 3950 *3900 3550 8 .00
15.0 ft lb *22,700 *22,700 *17,600 *17,600 *15,300 11,950 *12,650 8,450 *8,500 7,850 26.67 3 .0 m kg *10 300 8050 *8000 5350 6100 3850 *4000 3300 8 .33
10.0 ft lb *22,150 17,400 *17,350 11,450 13,150 8,300 *8,750 7,250 27.50 1 .5 m kg *12 100 7600 8350 5100 6000 3750 *4250 3200 8 .39 5.0 ft lb *26,100 16,400 17,950 11,000 12,900 8,050 *9,300 7,000 27.50
0 m kg *7400 *7400 *12 850 7350 8200 4950 5900 3650 *4750 3300 8 .17 0 ft lb *16,950 *16,950 27,650 15,850 17,600 10,650 12,750 7,900 *10,400 7,200 27.50
–10.0 ft lb *28,900 *28,900 *34,250 30,400 *24,650 15,850 17,550 10,650 15,300 9,400 22.50 –4 .5 m kg *11 800 *11 800 *8600 7600 *6850 6050 5 .32
–15.0 ft lb *25,200 *25,200 *18,150 16,350 *15,000 13,650 17.50
ISO 10567
* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load . The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007 . They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load . Weight of all lifting accessories must be deducted from the above lifting capacities . Lifting capacities are based on the machine standing on a firm, uniform supporting surface . The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance .
Lift capacity stays with ±5% for all available track shoes .
Always refer to the appropriate Operation and Maintenance Manual for specific product information .
325 Hydraulic Excavator Specifications
12
Reach Boom Lift Capacities – Counterweight: 6.7 mt (14,770 lb) – without Bucket, Heavy Lift: On
2.9 m (9'6") 5.7 m (18'8") 790 mm (31") HD Triple Grouser Shoes (Long Undercarriage)
3646 mm (12'0")
R2.9B1
2380 mm (7'8") 4455 mm (14'6")
1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft
m ft
9 .0 m kg *5000 *5000 4 .50 30.0 ft lb *11,300 *11,300 14.17 7 .5 m kg *6150 *6150 *5350 *5350 *4200 *4200 6 .28
25.0 ft lb *13,600 *13,600 *10,100 *10,100 *9,300 *9,300 20.83 6 .0 m kg *6650 *6650 *6400 5850 *3900 *3900 7 .35
20.0 ft lb *14,500 *14,500 *14,000 12,550 *8,650 *8,650 24.17 4 .5 m kg *10 650 *10 650 *8150 *8150 *7050 5700 *6300 4050 *3900 3650 8 .00
15.0 ft lb *22,700 *22,700 *17,600 *17,600 *15,300 12,250 *12,650 8,700 *8,500 8,050 26.67 3 .0 m kg *10 300 8250 *8000 5450 6300 3950 *4000 3400 8 .33
10.0 ft lb *22,150 17,800 *17,350 11,750 13,500 8,500 *8,750 7,450 27.50 1 .5 m kg *12 100 7800 8550 5250 6150 3850 *4250 3300 8 .39 5.0 ft lb *26,100 16,800 18,450 11,300 13,250 8,250 *9,300 7,200 27.50
0 m kg *7400 *7400 *12 850 7550 8400 5100 6100 3750 *4750 3350 8 .17 0 ft lb *16,950 *16,950 *27,850 16,250 18,050 10,950 13,050 8,100 *10,400 7,400 27.50
–10.0 ft lb *28,900 *28,900 *34,250 31,200 *24,650 16,250 18,050 10,900 *15,650 9,650 22.50 –4 .5 m kg *11 800 *11 800 *8600 7800 *6850 6200 5 .32
–15.0 ft lb *25,200 *25,200 *18,150 16,800 *15,000 14,000 17.50
ISO 10567
* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load . The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007 . They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load . Weight of all lifting accessories must be deducted from the above lifting capacities . Lifting capacities are based on the machine standing on a firm, uniform supporting surface . The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance .
Lift capacity stays with ±5% for all available track shoes .
Always refer to the appropriate Operation and Maintenance Manual for specific product information .
13
325 Hydraulic Excavator Specifications
Reach Boom Lift Capacities – Counterweight: 4.9 mt (10,800 lb) – without Bucket, Heavy Lift: On
2.9 m (9'6") 5.7 m (18'8") 600 mm (24") HD Triple Grouser Shoes (Blade – Up in Front)
3646 mm (12'0")
R2.9B1
2380 mm (7'8") 4455 mm (14'6")
1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft
m ft
9 .0 m kg *5000 *5000 4 .5030.0 ft lb *11,350 *11,350 14.177 .5 m kg *6200 *6200 *5350 5300 *4200 *4200 6 .28
25.0 ft lb *13,650 *13,650 *10,150 *10,150 *9,350 *9,350 20.836 .0 m kg *6650 *6650 *6400 5250 *3950 3750 7 .35
20.0 ft lb *14,500 *14,500 *14,050 11,300 *8,700 8,400 24.174 .5 m kg *10 650 *10 650 *8150 7950 *7050 5100 5450 3600 *3900 3250 8 .00
15.0 ft lb *22,700 *22,700 *17,600 17,100 *15,300 10,950 11,700 7,700 *8,550 7,150 26.673 .0 m kg *10 250 7400 7550 4850 5350 3500 *4000 3000 8 .33
10.0 ft lb *22,100 15,900 16,200 10,450 11,450 7,500 *8,800 6,550 27.501 .5 m kg 11 500 6900 7250 4650 5200 3400 *4250 2900 8 .395.0 ft lb 24,700 14,900 15,650 9,950 11,200 7,300 *9,350 6,350 27.50
0 m kg *7450 *7450 11 200 6650 7100 4500 5100 3300 4550 2950 8 .170 ft lb *17,000 *17,000 24,000 14,350 15,250 9,650 11,000 7,100 10,000 6,500 27.50
–10.0 ft lb *28,950 *28,950 *34,150 27,600 24,000 14,350 15,200 9,600 13,300 8,500 22.50–4 .5 m kg *11 800 *11 800 *8600 6900 *6850 5500 5 .32
–15.0 ft lb *25,100 *25,100 *18,100 14,900 *14,950 12,400 17.50
ISO 10567
* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load . The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007 . They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load . Weight of all lifting accessories must be deducted from the above lifting capacities . Lifting capacities are based on the machine standing on a firm, uniform supporting surface . The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance .
Lift capacity stays with ±5% for all available track shoes .
Always refer to the appropriate Operation and Maintenance Manual for specific product information .
325 Hydraulic Excavator Specifications
14
Reach Boom Lift Capacities – Counterweight: 4.9 mt (10,800 lb) – without Bucket, Heavy Lift: On
2.9 m (9'6") 5.7 m (18'8") 600 mm (24") HD Triple Grouser Shoes (Blade – Down)
3646 mm (12'0")
R2.9B1
2380 mm (7'8") 4455 mm (14'6")
1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft
m ft
9 .0 m kg *5000 *5000 4 .5030.0 ft lb *11,350 *11,350 14.177 .5 m kg *6200 *6200 *5350 *5350 *4200 *4200 6 .28
25.0 ft lb *13,650 *13,650 *10,150 *10,150 *9,350 *9,350 20.836 .0 m kg *6650 *6650 *6400 5700 *3950 *3950 7 .35
20.0 ft lb *14,500 *14,500 *14,050 12,300 *8,700 *8,700 24.174 .5 m kg *10 650 *10 650 *8150 *8150 *7050 5550 *6300 3900 *3900 3550 8 .00
15.0 ft lb *22,700 *22,700 *17,600 *17,600 *15,300 11,950 *12,700 8,400 *8,550 7,800 26.673 .0 m kg *10 250 8100 *8000 5300 *6900 3800 *4000 3250 8 .33
10.0 ft lb *22,100 17,500 *17,350 11,450 *15,000 8,200 *8,800 7,150 27.501 .5 m kg *12 050 7650 *8900 5100 *7300 3700 *4250 3150 8 .395.0 ft lb *26,050 16,400 *19,300 10,900 *15,900 7,950 *9,350 6,950 27.50
0 m kg *7450 *7450 *12 850 7350 *9450 4900 *7550 3650 *4750 3250 8 .170 ft lb *17,000 *17,000 *27,800 15,850 *20,500 10,600 *16,300 7,800 1*0,450 7,100 27.50
–10.0 ft lb *28,950 *28,950 *34,150 31,150 *24,600 15,850 *18,150 10,550 *15,650 9,300 22.50–4 .5 m kg *11 800 *11 800 *8600 7600 *6850 6050 5 .32
–15.0 ft lb *25,100 *25,100 *18,100 16,400 *14,950 13,600 17.50
ISO 10567
* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load . The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007 . They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load . Weight of all lifting accessories must be deducted from the above lifting capacities . Lifting capacities are based on the machine standing on a firm, uniform supporting surface . The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance .
Lift capacity stays with ±5% for all available track shoes .
Always refer to the appropriate Operation and Maintenance Manual for specific product information .
15
325 Hydraulic Excavator Specifications
Reach Boom Lift Capacities – Counterweight: 4.9 mt (10,800 lb) – without Bucket, Heavy Lift: On
2.9 m (9'6") 5.7 m (18'8") 600 mm (24") HD Triple Grouser Shoes (Blade – Up in Front)
3646 mm (12'0")
R2.9B1 TRS
2380 mm (7'8") 4455 mm (14'6")
1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft
m ft
9 .0 m kg *5000 *5000 4 .5030.0 ft lb *11,300 *11,300 14.177 .5 m kg *6100 *6100 *5300 5200 *4200 *4200 6 .28
25.0 ft lb *13,500 *13,500 *10,050 *10,050 *9,300 *9,300 20.836 .0 m kg *6600 *6600 *6350 5200 *3900 3700 7 .35
20.0 ft lb *14,350 *14,350 *13,850 11,150 *8,650 8,250 24.174 .5 m kg *10 600 *10 600 *8100 7850 *6950 5050 5400 3550 *3850 3150 8 .00
15.0 ft lb *22,500 *22,500 *17,450 16,950 *15,100 10,800 11,550 7,550 *8,500 7,000 26.673 .0 m kg *10 150 7300 7450 4800 5250 3450 *3950 2900 8 .33
10.0 ft lb *21,850 15,700 16,000 10,300 11,300 7,350 *8,700 6,400 27.501 .5 m kg 11 400 6800 7200 4550 5150 3300 *4250 2800 8 .395.0 ft lb 24,400 14,600 15,450 9,750 11,050 7,100 *9,300 6,150 27.50
0 m kg *7400 *7400 11 050 6550 7000 4400 5050 3250 4450 2900 8 .170 ft lb *16,950 *16,950 23,700 14,050 15,050 9,400 10,850 6,950 9,850 6,300 27.50
–10.0 ft lb *28,900 *28,900 *33,750 27,150 23,750 14,050 15,000 9,400 13,100 8,300 22.50–4 .5 m kg *11 600 *11 600 *8450 6800 *6750 5400 5 .32
–15.0 ft lb *24,750 *24,750 *17,850 14,650 *14,700 12,200 17.50
ISO 10567
* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load . The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007 . They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load . Weight of all lifting accessories must be deducted from the above lifting capacities . Lifting capacities are based on the machine standing on a firm, uniform supporting surface . The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance .
Lift capacity stays with ±5% for all available track shoes .
Always refer to the appropriate Operation and Maintenance Manual for specific product information .
TRS = Thumb Ready Stick
325 Hydraulic Excavator Specifications
16
Reach Boom Lift Capacities – Counterweight: 4.9 mt (10,800 lb) – without Bucket, Heavy Lift: On
2.9 m (9'6") 5.7 m (18'8") 600 mm (24") HD Triple Grouser Shoes (Blade – Down)
3646 mm (12'0")
R2.9B1 TRS
2380 mm (7'8") 4455 mm (14'6")
1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft
m ft
9 .0 m kg *5000 *5000 4 .5030.0 ft lb *11,300 *11,300 14.177 .5 m kg *6100 *6100 *5300 *5300 *4200 *4200 6 .28
25.0 ft lb *13,500 *13,500 *10,050 *10,050 *9,300 *9,300 20.836 .0 m kg *6600 *6600 *6350 5650 *3900 *3900 7 .35
20.0 ft lb *14,350 *14,350 *13,850 12,150 *8,650 *8,650 24.174 .5 m kg *10 600 *10 600 *8100 *8100 *6950 5500 *6250 3850 *3850 3450 8 .00
15.0 ft lb *22,500 *22,500 *17,450 *17,450 *15,100 11,800 *12,650 8,250 *8,500 7,650 26.673 .0 m kg *10 150 8000 *7900 5250 *6800 3750 *3950 3200 8 .33
10.0 ft lb *21,850 17,250 *17,100 11,250 *14,800 8,050 *8,700 7,000 27.501 .5 m kg *11 950 7500 *8800 5000 *7200 3650 *4250 3100 8 .395.0 ft lb *25,750 16,150 *19,050 10,700 *15,650 7,800 *9,300 6,750 27.50
0 m kg *7400 *7400 *12 700 7250 *9350 4800 *7450 3550 *4700 3150 8 .170 ft lb *16,950 *16,950 *27,500 15,550 *20,250 10,350 *16,100 7,600 *10,350 6,950 27.50
–10.0 ft lb *28,900 *28,900 *33,750 30,700 *24,300 15,600 *17,950 10,350 *15,400 9,150 22.50–4 .5 m kg *11 600 *11 600 *8450 7500 *6750 5950 5 .32
–15.0 ft lb *24,750 *24,750 *17,850 16,200 *14,700 13,400 17.50
ISO 10567
* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load . The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007 . They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load . Weight of all lifting accessories must be deducted from the above lifting capacities . Lifting capacities are based on the machine standing on a firm, uniform supporting surface . The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance .
Lift capacity stays with ±5% for all available track shoes .
Always refer to the appropriate Operation and Maintenance Manual for specific product information .
TRS = Thumb Ready Stick
17
325 Hydraulic Excavator Specifications
Reach Boom Lift Capacities – Counterweight: 4.9 mt (10,800 lb) – without Bucket, Heavy Lift: On
2.9 m (9'6") 5.7 m (18'8") 790 mm (31") HD Triple Grouser Shoes (Blade – Up in Front)
3646 mm (12'0")
R2.9B1
2380 mm (7'8") 4455 mm (14'6")
1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft
m ft
9 .0 m kg *5000 *5000 4 .5030.0 ft lb *11,350 *11,350 14.177 .5 m kg *6200 *6200 *5350 *5350 *4200 *4200 6 .28
25.0 ft lb *13,650 *13,650 *10,150 *10,150 *9,350 *9,350 20.836 .0 m kg *6650 *6650 *6400 5400 *3950 3900 7 .35
20.0 ft lb *14,500 *14,500 *14,050 11,600 *8,700 8,650 24.174 .5 m kg *10 650 *10 650 *8150 8150 *7050 5250 5600 3700 *3900 3350 8 .00
15.0 ft lb *22,700 *22,700 *17,600 17,500 *15,300 11,250 12,000 7,950 *8,550 7,350 26.673 .0 m kg *10 250 7600 7750 5000 5500 3600 *4000 3050 8 .33
10.0 ft lb *22,100 16,350 16,650 10,750 11,800 7,750 *8,800 6,750 27.501 .5 m kg 11 850 7100 7500 4750 5350 3500 *4250 3000 8 .395.0 ft lb 25,400 15,350 16,100 10,300 11,550 7,500 *9,350 6,550 27.50
0 m kg *7450 *7450 11 550 6850 7300 4600 5300 3400 4700 3050 8 .170 ft lb *17,000 *17,000 24,700 14,800 15,700 9,950 11,350 7,350 10,300 6,700 27.50
–10.0 ft lb *28,950 *28,950 *34,150 28,400 *24,600 14,800 15,700 9,900 13,700 8,800 22.50–4 .5 m kg *11 800 *11 800 *8600 7100 *6850 5650 5 .32
–15.0 ft lb *25,100 *25,100 *18,100 15,300 *14,950 12,750 17.50
ISO 10567
* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load . The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007 . They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load . Weight of all lifting accessories must be deducted from the above lifting capacities . Lifting capacities are based on the machine standing on a firm, uniform supporting surface . The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance .
Lift capacity stays with ±5% for all available track shoes .
Always refer to the appropriate Operation and Maintenance Manual for specific product information .
325 Hydraulic Excavator Specifications
18
Reach Boom Lift Capacities – Counterweight: 4.9 mt (10,800 lb) – without Bucket, Heavy Lift: On
2.9 m (9'6") 5.7 m (18'8") 790 mm (31") HD Triple Grouser Shoes (Blade – Down)
3646 mm (12'0")
R2.9B1
2380 mm (7'8") 4455 mm (14'6")
1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft
m ft
9 .0 m kg *5000 *5000 4 .5030.0 ft lb *11,350 *11,350 14.177 .5 m kg *6200 *6200 *5350 *5350 *4200 *4200 6 .28
25.0 ft lb *13,650 *13,650 *10,150 *10,150 *9,350 *9,350 20.836 .0 m kg *6650 *6650 *6400 6100 *3950 *3950 7 .35
20.0 ft lb *14,500 *14,500 *14,050 13,050 *8,700 *8,700 24.174 .5 m kg *10 650 *10 650 *8150 *8150 *7050 5900 *6300 4200 *3900 3750 8 .00
15.0 ft lb *22,700 *22,700 *17,600 *17,600 *15,300 12,700 *12,700 8,950 *8,550 8,300 26.673 .0 m kg *10 250 8700 *8000 5650 *6900 4100 *4000 3500 8 .33
10.0 ft lb *22,100 18,700 *17,350 12,200 *15,000 8,750 *8,800 7,650 27.501 .5 m kg *12 050 8200 *8900 5450 *7300 3950 *4250 3400 8 .395.0 ft lb *26,050 17,600 *19,300 11,700 *15,900 8,550 *9,350 7,450 27.50
0 m kg *7450 *7450 *12 850 7900 *9450 5250 *7550 3900 *4750 3450 8 .170 ft lb *17,000 *17,000 *27,800 17,050 *20,500 11,350 *16,300 8,350 *10,450 7,600 27.50
–10.0 ft lb *28,950 *28,950 *34,150 33,750 *24,600 17,050 *18,150 11,300 *15,650 10,000 22.50–4 .5 m kg *11 800 *11 800 *8600 8150 *6850 6450 5 .32
–15.0 ft lb *25,100 *25,100 *18,100 17,600 *14,950 14,600 17.50
ISO 10567
* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load . The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007 . They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load . Weight of all lifting accessories must be deducted from the above lifting capacities . Lifting capacities are based on the machine standing on a firm, uniform supporting surface . The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance .
Lift capacity stays with ±5% for all available track shoes .
Always refer to the appropriate Operation and Maintenance Manual for specific product information .
19
325 Hydraulic Excavator Specifications
Reach Boom Lift Capacities – Counterweight: 4.9 mt (10,800 lb) – without Bucket, Heavy Lift: On
2.9 m (9'6") 5.7 m (18'8") 790 mm (31") HD Triple Grouser Shoes (Blade – Up in Front)
3646 mm (12'0")
R2.9B1 TRS
2380 mm (7'8") 4455 mm (14'6")
1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft
m ft
9 .0 m kg *5000 *5000 4 .5030.0 ft lb *11,300 *11,300 14.177 .5 m kg *6100 *6100 *5300 *5300 *4200 *4200 6 .28
25.0 ft lb *13,500 *13,500 *10,050 *10,050 *9,300 *9,300 20.836 .0 m kg *6600 *6600 *6350 5350 *3900 3800 7 .35
20.0 ft lb *14,350 *14,350 *13,850 11,450 *8,650 8,500 24.174 .5 m kg *10 600 *10 600 *8100 8050 *6950 5150 5550 3650 *3850 3250 8 .00
15.0 ft lb *22,500 *22,500 *17,450 17,350 *15,100 11,100 11,850 7,800 *8,500 7,200 26.673 .0 m kg *10 150 7500 7650 4900 5400 3550 *3950 3000 8 .33
10.0 ft lb *21,850 16,150 16,450 10,600 11,650 7,600 *8,700 6,600 27.501 .5 m kg 11 700 7000 7400 4700 5300 3400 *4250 2900 8 .395.0 ft lb 25,100 15,050 15,900 10,050 11,350 7,350 *9,300 6,400 27.50
0 m kg *7400 *7400 11 400 6750 7200 4500 5200 3350 4600 3000 8 .170 ft lb *16,950 *16,950 24,400 14,500 15,500 9,700 11,150 7,150 10,150 6,550 27.50
–10.0 ft lb *28,900 *28,900 *33,750 28,000 *24,300 14,500 15,450 9,700 13,500 8,600 22.50–4 .5 m kg *11 600 *11 600 *8450 7000 *6750 5550 5 .32
–15.0 ft lb *24,750 *24,750 *17,850 15,100 *14,700 12,550 17.50
ISO 10567
* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load . The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007 . They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load . Weight of all lifting accessories must be deducted from the above lifting capacities . Lifting capacities are based on the machine standing on a firm, uniform supporting surface . The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance .
Lift capacity stays with ±5% for all available track shoes .
Always refer to the appropriate Operation and Maintenance Manual for specific product information .
TRS = Thumb Ready Stick
325 Hydraulic Excavator Specifications
20
Reach Boom Lift Capacities – Counterweight: 4.9 mt (10,800 lb) – without Bucket, Heavy Lift: On
2.9 m (9'6") 5.7 m (18'8") 790 mm (31") HD Triple Grouser Shoes (Blade – Down)
3646 mm (12'0")
R2.9B1 TRS
2380 mm (7'8") 4455 mm (14'6")
1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft
m ft
9 .0 m kg *5000 *5000 4 .5030.0 ft lb *11,300 *11,300 14.177 .5 m kg *6100 *6100 *5300 *5300 *4200 *4200 6 .28
25.0 ft lb *13,500 *13,500 *10,050 *10,050 *9,300 *9,300 20.836 .0 m kg *6600 *6600 *6350 6000 *3900 *3900 7 .35
20.0 ft lb *14,350 *14,350 *13,850 12,900 *8,650 *8,650 24.174 .5 m kg *10 600 *10 600 *8100 *8100 *6950 5850 *6250 4100 *3850 3700 8 .00
15.0 ft lb *22,500 *22,500 *17,450 *17,450 *15,100 12,550 *12,650 8,800 *8,500 8,150 26.673 .0 m kg *10 150 8550 *7900 5600 *6800 4000 *3950 3400 8 .33
10.0 ft lb *21,850 18,450 *17,100 12,000 *14,800 8,600 *8,700 7,500 27.501 .5 m kg *11 950 8050 *8800 5350 *7200 3900 *4250 3300 8 .395.0 ft lb *25,750 17,350 *19,050 11,500 *15,650 8,350 *9,300 7,250 27.50
0 m kg *7400 *7400 *12 700 7800 *9350 5150 *7450 3800 *4700 3400 8 .170 ft lb *16,950 *16,950 *27,500 16,750 *20,250 11,100 *16,100 8,150 *10,350 7,450 27.50
–10.0 ft lb *28,900 *28,900 *33,750 33,300 *24,300 16,750 *17,950 11,100 *15,400 9,800 22.50–4 .5 m kg *11 600 *11 600 *8450 8050 *6750 6350 5 .32
–15.0 ft lb *24,750 *24,750 *17,850 17,350 *14,700 14,400 17.50
ISO 10567
* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load . The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007 . They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load . Weight of all lifting accessories must be deducted from the above lifting capacities . Lifting capacities are based on the machine standing on a firm, uniform supporting surface . The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance .
Lift capacity stays with ±5% for all available track shoes .
Always refer to the appropriate Operation and Maintenance Manual for specific product information .
TRS = Thumb Ready Stick
21
325 Hydraulic Excavator Specifications
Bucket Specifications and Compatibility
LinkageWidth Capacity Weight Fill
Long Undercarriage8.3 mt (18,300 lb) Counterweight
6.7 mt (14,770 lb) Counterweight
4.9 mt (10,800 lb) Counterweight
No Blade No Blade With Blade Up in FrontReach Boom Reach Boom Reach Boom
mm in m3 yd3 kg lb % R2 .9 (9'6") R2 .9 (9'6") TR 2 .9 m (9'6") R2 .9 (9'6") R2 .9 (9'6") TRPin-On (No Quick Coupler)General Duty B 600 24 0 .55 0 .72 620 1,366 100
Maximum load with pin-on (payload + bucket)kg 3780 3690 3360 2900 2805 lb 8,333 8,135 7,408 6,393 6,184
The above loads are in compliance with hydraulic excavator standard EN474-5:2006 + A3:2013, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity with front linkage fully extended at ground line with bucket curled .Capacity based on ISO 7451:2007 .Bucket weight with General Duty tips .
Maximum Material Density:
2100 kg/m3 (3,500 lb/yd3)
1800 kg/m3 (3,000 lb/yd3)
1500 kg/m3 (2,500 lb/yd3)
1200 kg/m3 (2,000 lb/yd3)
900 kg/m3 (1,500 lb/yd3)
X Not Recommended
Caterpillar recommends using appropriate work tools to maximize the value customers receive from our products . Use of work tools, including buckets, which are outside of Caterpillar’s recommendations or specifications for weight, dimensions, flows, pressures, etc . may result in less-than-optimal performance, including but not limited to reductions in production, stability, reliability, and component durability . Improper use of a work tool resulting in sweeping, prying, twisting and/or catching of heavy loads will reduce the life of the boom and stick .
(continued on next page)
325 Hydraulic Excavator Specifications
22
Bucket Specifications and Compatibility (continued)
LinkageWidth Capacity Weight Fill
Long Undercarriage8.3 mt (18,300 lb) Counterweight
6.7 mt (14,770 lb) Counterweight
4.9 mt (10,800 lb) Counterweight
No Blade No Blade With Blade Up in FrontReach Boom Reach Boom Reach Boom
mm in m3 yd3 kg lb % R2 .9 (9'6") R2 .9 (9'6") TR 2 .9 m (9'6") R2 .9 (9'6") R2 .9 (9'6") TRWith Pin Grabber CouplerGeneral Duty B 600 24 0 .55 0 .72 620 1,366 100
Maximum load with coupler (payload + bucket)kg 3358 3268 2938 2478 2383 lb 7,404 7,205 6,478 5,463 5,254
The above loads are in compliance with hydraulic excavator standard EN474-5:2006 + A3:2013, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity with front linkage fully extended at ground line with bucket curled .Capacity based on ISO 7451:2007 .Bucket weight with General Duty tips .
Maximum Material Density:
2100 kg/m3 (3,500 lb/yd3)
1800 kg/m3 (3,000 lb/yd3)
1500 kg/m3 (2,500 lb/yd3)
1200 kg/m3 (2,000 lb/yd3)
900 kg/m3 (1,500 lb/yd3)
Caterpillar recommends using appropriate work tools to maximize the value customers receive from our products . Use of work tools, including buckets, which are outside of Caterpillar’s recommendations or specifications for weight, dimensions, flows, pressures, etc . may result in less-than-optimal performance, including but not limited to reductions in production, stability, reliability, and component durability . Improper use of a work tool resulting in sweeping, prying, twisting and/or catching of heavy loads will reduce the life of the boom and stick .
23
325 Hydraulic Excavator Specifications
PIN-ON ATTACHMENTSUndercarriage L L L with Blade Down L with Blade Up In FrontCounterweight 8.3 mt
(18,300 lb)6.7 mt
(14,770 lb)4.9 mt
(10,800 lb)4.9 mt
(10,800 lb)Boom Type Reach Reach Reach ReachStick Length 2.9 m
(9'6")2.9 m
(9'6") TR2.9 m (9'6")
2.9 m (9'6")
2.9 m (9'6") TR
2.9 m (9'6")
2.9 m (9'6") TR
Hydraulic Hammers H120 GC H120 GC S H120 S H130 GC H130 GC S H130 S † † †
TRS18 (PIN-ON TOP/S70 BOTTOM) ATTACHMENTSUndercarriage L L L with Blade Up In FrontCounterweight 8.3 mt (18,300 lb) 6.7 mt (14,770 lb) 4.9 mt (10,800 lb)Boom Type Reach Reach ReachStick Length 2.9 m (9'6") 2.9 m (9'6") TR 2.9 m (9'6") 2.9 m (9'6") 2.9 m (9'6") TRHydraulic Hammers H115 S
H120 GC S † † † H120 S † † †
Compactors (Vibratory Plate)
CVP75 CVP110
BOOM-MOUNT ATTACHMENTSUndercarriage L L with Blade Down L with Blade Up In FrontCounterweight 8.3 mt (18,300 lb) 4.9 mt (10,800 lb) 4.9 mt (10,800 lb)Boom Type Reach Reach ReachMobile Scrap and Demolition Shears
S2050 S3035 S3035 Flat Top
Attachments Offering Guide (continued)Not all Attachments are available in all regions . Consult your Cat dealer for configurations available in your region .
Match * Working range front only † Allowed usage on machine less than 50% No Match
25
325 Hydraulic Excavator Specifications
Thumb SpecificationsNot all Attachments are available in all regions . Consult your Cat dealer for configurations available in your region .
Materials and specifications are subject to change without notice . Featured machines in photos may include additional equipment . See your Cat dealer for available options .
CAT, CATERPILLAR, LET’S DO THE WORK, their respective logos, “Caterpillar Corporate Yellow,” the “Power Edge” and Cat “Modern Hex” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission .