Technical Furniture and Workstation Systemscustom-products.com/Industrial.nsf/get/PDF-Default-LISTA+CATALOGS/... · Technical Furniture and Workstation Systems ... productivity and

Technical Furniture and Workstation Systems

Arlink® 8000 Modular Workstations

Arlink® 7000 Workbenches

VSI Accessory System

Jim Norton

CPS Banner-Lista

Completely integrated and modular, Lista’s Arlink® 8000 workstationsand Arlink® 7000 workbenches ensure that you’ll always have the exactworkstation your work demands. Their enduring adaptability means thatyou’ll have a cost-effective solution for all of your workstation needs,both today and in the future.

From single workbenches to complete facility-wide installations, theArlink 8000 and 7000 systems’ architecture enables users to create productive workstation environments for almost any person performingalmost any task. Lista Arlink workstation systems serve a wide varietyof applications in the workplace:

• assembly• repair• service• light manufacturing• labs• clean rooms• office operations• R&D• test and calibration

Arlink 8000 workstations and Arlink 7000 workbenches share manycommon components and accessories, which increase flexibility in useand reduce the cost of ownership. Sound ergonomic principles areincorporated in the design of all Arlink 8000 and 7000 products, minimiz-ing fatigue and strain while insuring increased productivity.

Our ergonomic and adaptable systems are designed to enable easy customization of individual workstations and fast configuring of complex, multi-station systems.

CONTENTSProduct Features 4Clean Room, ESD Capabilities 4Paint and Trim Colors 4Worksurfaces 5Design Services 6Configuration Options 7Arlink 8000 Workstations 8

Features and Benefits 9Easy-Order Workstations 10Worksurface Assemblies 11Build-Your Own Workstations 12Build-Your Own Mobile Workstations 13Shelves 14-15Overhead Cabinets 15Lighting Accessories 16Panels 17Utility Accessories 18Hanging Drawers 19Storage Accessories 20Tool Accessories, Footrests 21Swing Arm System 22-23Computing Accessories 24ESD Accessories 25Utility and Parts Carts 26Flow Rack Workstations 27Progressive Assembly 27

Arlink 7000 Workbenches 28Features and Benefits 29Easy-Order Workbenches 30Workbench Components 31Below-Worksurface Accessories 32Above-Worksurface Accessories 33VSI Accessory System 34

Companion Cabinets 35

Workspace Solutions for Every Need

2

Jim Norton

CPS Banner-Lista

Ease of flexibility when positioningsystem components is a hallmark ofArlink 8000 workstations.

Lista’s Arlink 8000 Workstations and Arlink 7000 Workbenches

3

ARLINK® 7000 WORKBENCH SYSTEMS

Arlink 7000 workbench systems let you tailor traditional workbenches toyour needs while providing greater versatility than conventional work-benches. These efficient, ergonomic workbenches significantly improveproductivity and maximize use of floor space. Select a stationary ormobile workbench, and choose from our extensive selection of acces-sories to design a workbench that exactly suits your requirements.

HEAVY DUTY QUALITY. Arlink 7000 workbenches’ heavy-duty con-struction is capable of supporting 1,000 lbs. (454 kg), evenly distributed.Six heavy-duty worksurfaces are available.

ADJUSTABLE HEIGHT. Arlink 7000 workbenches include leg extenders,which allow the user to adjust the height of the worksurface from 30" to36" in 2" increments.

EXTENSIVE ACCESSORIES. Above- and below-worksurface acces-sories enable you to customize your workbenches to meet your preciseneeds. With the addition of our VSI (Vertical Space Integrator) System,Arlink 7000 benches can take advantage of the entire family of Arlink 8000accessories.

To order Arlink 7000 workbenches, see pages 28-34.

Arlink 7000 workbenches offerhigh weight-bearing capacity andflexible design.

ARLINK® 8000 MODULAR WORKSTATION SYSTEMS

With their easy reconfigurability, Arlink 8000 workstations can bealtered for multiple functions as well as changes in your workflow.

MAXIMUM RETURN ON INVESTMENT. Arlink 8000 workstations’unique column design provides a sturdy, flexible backbone for yourevolving needs. Thanks to the system’s versatility and durability, thisexceptional series of workstations pays for itself quickly, while provid-ing continuous value for years to come.

EASE OF ASSEMBLY. The Arlink 8000 offers the industry’s fastest andsimplest set up and reconfiguration. Virtually no hardware or tools arerequired, making changes free of mistakes and frustration.

LOW-COST CONVERSION. With its interchangeable modular parts, theArlink 8000 can be custom configured to suit a range of applications at alower cost than competitive workstations.

ERGONOMICS. With an emphasis on ergonomics throughout itsdesign, the Arlink 8000 improves comfort, eliminates wasted motion,minimizes fatigue and strain, and reduces workplace injuries.

To order Arlink 8000 workstations, see pages 8-27.

Jim Norton

CPS Banner-Lista

Product Features

4

CLEAN ROOM COMPATIBILITYArlink® 7000 and Arlink® 8000 products may be configured for use inClass 10,000 clean rooms per the USA Federal Standard 209E and Class 7 per ISO 14644 International Clean Room Standard. Contact your Lista distributor or representative for details.

STATIC CONTROLIndustry demands and standards require workbenches that provide astatic safe environment for the control of static electricity. One of thecardinal rules for ESD prevention is to make sure that all workers whohandle ESD sensitive components are grounded. This is frequentlyaccomplished by wearing a grounded wrist strap or by groundingthrough footwear to the floor.

Our static dissipative laminate worksurfaces are manufactured to havea specific amount of conductivity. This controls the discharge of anycharged conductor brought to the workbench. A ground bolt through theworksurface makes contact with the conductive layer of the laminateproviding a path to ground. For users of worksurface materials thatcome in contact with highly sensitive devices, it is recommended thatan ESD mat kit be used in conjunction with a dissipative laminate.

We welcome the opportunity to discuss your individual ESD program.From our extensive ESD product portfolio our technical staff can selectand recommend appropriate products for you to evaluate and test toensure your selection is the correct product for your ESD program.

PAINT COLORSAll Arlink 7000 and Arlink 8000 product steel parts and accessoriescome in Light Gray (LG) or Sand (SN), in durable powder coat finish.Other colors can be quoted on request. Please specify color choice with all orders.

ACCENT TRIM COLORSAccent trim for support columns, lights, steel shelves and footrests(included with each Arlink 8000 workstation, and with VSI AccessorySystem support columns and accessories) is available in a choice ofcontemporary colors. Please specify trim color choice with all Arlink 8000 and VSI orders.

Sand Blue Teal Dark Blue

Burgundy Light Gray Royal Blue Black

Bright Blue Classic Blue

Jim Norton

CPS Banner-Lista

Worksurfaces

Arlink® 7000 workbenches and Arlink® 8000 workstations are availablewith a choice of durable worksurfaces, appropriate for any task or use.

STANDARD LAMINATE WORKSURFACE Worksurface is constructed of medium density particle board coveredon top and all sides with non-glare matte finish plastic laminate. Thefront edge is contoured for comfort and chip resistance. The under sideof the worksurface is sealed with a plastic tension sheet to preventmoisture absorption, warping and shedding.• Laminate is dove gray when used with Light Gray workstations.• Laminate is antique white when used with Sand workstations.

STATIC DISSIPATIVE LAMINATE WORKSURFACE Worksurface is the same as the standard laminate worksurface, butwith non-glare matte finish plastic laminate that provides a controlledpath to ground for the dissipation of static electricity. The worksurfaceis provided with a grounding kit that must be used to provide properprotection for components and personnel. Static dissipative value forthe material is 10 6 - 109. (See photo on facing page). • Laminate is dove gray when used with Light Gray workstations.• Laminate is almond when used with Sand workstations.

BUTCHER BLOCK WORKSURFACE Worksurface is satin finish hardwood ash with squared edge.

LISTA TOP WORKSURFACEWood core sandwiched by sanded oil-resistant pressed wood on thetop and bottom. Available for Arlink 7000 workbenches only.

STAINLESS STEEL WORKSURFACELista top with durable, heavy-gauge stainless steel cover that is fitted overtop and sides of wood core.

GALVANIZED STEEL WORKSURFACELista top with durable, heavy-gauge galvanized steel cover that is fittedover top and sides of wood core.

MATERIAL TRANSFER WORKSURFACESMaterial transfer worksurfaces offer a cost-effective, efficient meansof workflow management for products or pallets in assembly, repair andrework environments.

Through the use of pop-up balls, pop-up pads, insert wheels, or insertrollers, worksurfaces are customized to accommodate the transferneeds of your product and process. Material transfer worksurfaces areoften a lower cost alternative to conveyors and can greatly improve theefficiency, safety and ergonomics associated with working on andmoving a product. The unique ability to integrate Lista’s Arlink compo-nents and accessories such as task lighting, wire and steel shelving,drawers and cabinets provides unsurpassed flexibility.

Material transfer worksurfaces may be integrated with all Arlink 8000and Arlink 7000 module sizes, worksurface depths and materials.Please contact your Lista representative for help in configuring a system and providing the solution best suited to your requirements.

5

NOMINAL WORKSURFACE THICKNESSWorksurface Arlink 8000 Arlink 7000

standard laminate 1" (2.5 cm) 1 3⁄8" (3.5 cm)static dissipative laminate 1" (2.5 cm) 1 3⁄8" (3.5 cm)butcher block 1 1⁄4" (3 cm) 1 3⁄4" (4.5 cm)Lista top NA 1 3⁄4" (4.5 cm)stainless steel 1" (2.5 cm) 1 7⁄8" (4.75 cm)galvanized steel 1" (2.5 cm) 1 7⁄8" (4.75 cm)

Jim Norton

CPS Banner-Lista

Design Services and Product Selection

6

Our software shows plan views, elevations, bills ofmaterials, and multiple, alternate configurations.

Sitting30.5" worksurface height willaccommodate 99.5% of all maleand 99.9% of all female workers.

StandingDetermine optimal worksurfaceheight depending on the type ofwork being performed.

30.5"

SELECTING THE WORKBENCH SOLUTION THAT EXACTLYMEETS YOUR NEEDSIn choosing the workstation or workbench solution that best suits yourapplication and future needs, consider these questions:

• Is reconfigurability important to your needs? If so, the Arlink 8000system is an ideal starting point. Do you need heavy-duty construc-tion and a high weight-bearing capacity? Then the Arlink 7000 familyis the solution for you.

• Stationary or mobile workstation? Sitting or standing work (seeexamples below)? Select the type, size and height that best meetsyour needs.

• Customize your workstation by making selections from our extensiveoffering of workstation accessories.

• If you need assistance selecting your workstation, laying out a room,department, or facility, or defining the best accessories for the task,contact Lista at 800-722-3020, or visit www.listaintl.com.

Lista’s goal is to provide our customers with exceptional value through a combination of excellent products and an emphasis on service thatmake specifying, procurement, installation, and use of our productssimple and satisfying. We can provide you with any of the followingservices or design a custom support program tailored just for you.

DESIGN SERVICESLista will help you with the layout of your facility, and will design work-stations specific to your needs through the use of our state-of-the-artsoftware tools. We can also lay out your entire facility to scale, eitherusing your supplied CAD drawings, or by creating depictions of yourrooms according to dimensions you provide. Our software will allow youto easily examine plan views, elevations, bills of materials, and multiple,alternate configurations.

By experimenting with various design solutions, the optimal configura-tion can be visualized before finalizing your order. This will ensure thebest solution for your present application while considering your futureneeds. Our software presents various “what if” scenarios and lists ofsystem components required for any variety of layouts or configura-tions. Ask your Lista representative for a demonstration today.

CUSTOM SOLUTIONSWhen a solution other than our standard products is required, Lista willmodify an existing standard part, or provide custom design and fabrica-tion services. We have designed solutions to meet needs in such applica-tions as labs, computer and LAN furniture, electronic assembly and manymore. We will also work with you or your other suppliers to integrateArlink® 7000 workbenches and Arlink® 8000 workstations with otherequipment or furnishings in your plan.

TECHNICAL SUPPORTLista offers superior product support through an extensive network of representatives and distributors. Our large and growing network provides support for Lista customers virtually everywhere they locateor replicate operations.

Jim Norton

CPS Banner-Lista

7

In-line Configuration

X Configuration

T Configuration

L Configuration

Y Configuration

In-line Back-to-Back Configuration

U ConfigurationFLOOR SPACE UTILIZATIONArlink® 7000 workbenches andArlink® 8000 workstations enableyou to achieve maximum produc-tivity per square foot. Our work-stations can be designed innumerous configurations to meetany application. You can configureyour workstations to suit your needs today, and as future needs evolve.

Many workstation configurations may also be ordered with mobilecapabilities, enabling you to quickly and easily re-locate entire work-station groupings.

Please contact your Lista representative for additional configurationoptions.

Single sided – operator faces con-veyor with standard worksurface

Double sided – operator faces con-veyor with standard worksurface

CONVEYOR WORKSTATION The Arlink 8000 family of conveyor workstation systems provides cost-effective, high-efficiency workflow management throughout your entireproduction stream, between auto-matic machines and in operationsincluding:

• manual assembly areas• inspection• testing• rework• packaging

Systems are available with single- or multi-level conveyor or easily inte-grated with the conveyor of your choice.

Select from Arlink 8000 workstation options to best optimize work flowmanagement, including worksurfaces and accessories (task lighting,power, air and data beams, open wire shelving and parts bin racks, etc.).

Double sided – operator at 90˚ toconveyor with standard work-surface

Double sided – operator faces conveyor with scalloped work-surface

A Multitude of Configuration Options

Jim Norton

CPS Banner-Lista

8

Arlink 8000 workstations are designed to allow the greatest user flexi-bility possible. Through the use of our unique Definite PositioningSystemTM, numerous footprint configurations, and easy-to-assembleStarter and Adder modules, you can easily adapt and reconfigure yourworkstations as your needs evolve.

DEFINITE POSITIONING SYSTEMAn innovative assembly concept whichfeatures one Macro and two Micro slotson each side of a high strength column,this approach greatly reduces the timeand effort needed to attach componentsto the system, while making highly effi-cient use of space. This unique columndesign maximizes accessory density andplacement options. Since columns aredouble sided, a single column may beused by two back-to-back workstations,as well as adjacent modules.

Macro slots, located in the center of thecolumn, provide support for heavy-duty components, such as work-surfaces and shelving. In the case of adjacent workstation modules,the Macro slot is utilized by both to save space and reduce systemcost. Components that attach to the Macro slots are verticallyadjustable in 3" (8 cm) increments.

Micro slots provide support for lighter-duty components, such aspower beams and parts bin rails. Micro slots are located to the left andright of the Macro slot, and provide maximum component placementoptions, with vertical adjustment in 1" (2.5 cm) increments.

Brackets fit into eitherMicro slots (above) orMacro slots (below).

The Uniquely Configurable Arlink® 8000 Workstation

Jim Norton

CPS Banner-Lista

9

Arlink® 8000 Workstation Features and Benefits

SIMPLICITY• Fast, easy assembly.• With our Starter and Adder system, workstations can easily link to create infinite layout options.• Workstations can be converted from single- to double-sided at any time – quickly, easily and inexpensively.

MODULARITY• Five standard module lengths – 30" (76 cm), 36" (91 cm), 48" (122 cm), 60" (152 cm) and 72" (183 cm) – can be

mixed and matched to suit your needs.• Three column heights – 54" (137 cm), 72" (183 cm) and 84" (213 cm) – other heights available upon request.• Full column height can be used to attach worksurfaces, shelves or other accessories.• Both sides of column may be used to attach accessories or create double-sided workstations.

STRENGTH• Made of high strength, cold rolled steel, the system’s columns provide maximum structural integrity.• Meets all applicable ANSI-BIFMA standards.

ADAPTABILITY• Definite Positioning System™ allows easy, secure placement and reconfiguration of accessories.

MOBILITY• Mobile workstations and mobile companion cabinets are easily relocated, allowing fast layout changes.

SECURE STORAGE• Hanging drawers, overhead cabinets and/or companion cabinets can be added anywhere you need them to

provide secure storage for valuable tools, equipment, parts or personal effects.

ELECTROSTATIC CONTROL• Electrostatic control products and accessories are available to meet most ESD-related requirements.

VISIBILITY• Task lighting at each station provides illumination for the most exacting work.

AESTHETICS • Contemporary appearance – all components are powder coated in attractive standard Light Gray or Sand,

with other colors available on request.• Select from ten standard trim colors to suit your decor or designate a particular department or function.

Overhead lighting

Choice of columnheights

Variety of utility beams

Adjustable work-surfaces in a variety ofsizes and materials

Variety of footrests

Leveling glides

Double-sided column– worksurfaces

and accessories canattach to either side

of column

Easily-repositionedhanging accessories

Ten decorative trim colors

Variety of application-specific outriggers

10

The Easy-Order workstation modules shown on this page are pre-con-figured to include the most popular and versatile styles of Arlink 8000workstations we offer. To design a custom workstation to suit alternateconfigurations, see pages 12-13.

Arlink 8000 workstations consist of a Starter module, and as manyAdder modules as you need for your application.

Choose from single- or double-sided Starters, Adders, or Corners in allstandard module lengths and heights. You may also select either 28"- or 30"-deep worksurfaces in either standard laminate or static dissipative material. Easy-Order modules include all accessories shownin the charts to the left. To order additional accessories, please seepages 14-25.

To configure an Easy-Order Arlink 8000 workstation moduleFollow the 5 steps below for Starter module and repeat for each Addermodule.

■ Choose Easy-Order module configuration: A-SS (single-sided Starter)A-SA (single-sided Adder)A-SC (single-sided Corner Adder)A-DS (double-sided Starter)A-DA (double-sided Adder) A-DC (double-sided Corner Adder)

■ Choose module length*: 30 (30"/76 cm), 36 (36"/91 cm), 48 (48"/122 cm),60 (60"/152 cm) or 72 (72"/183 cm) *corner adders 36" long only

■ Choose module height*: 54 (54"/137 cm), 72 (72"/183 cm), or 84 (84"/213 cm)*54" high modules do not include light assemblies

■ Choose module depth: 28 (28"/71 cm) or 30 (30"/76 cm)

■ Choose worksurface material: SL (standard laminate) or SD (static dissipative)

■ Choose powder coat paint color: LG (Light Gray) or SN (Sand)

Example: to order a Starter single-sided workstation module that is 60" long, 84" high and 30" deep with a standard laminate worksurface and alight gray finish, the part number would be A-SS608430SLLG.

To order an Adder single-sided workstation module that is 48" long, 84" highand 30" deep with a standard laminate worksurface and a light gray finish,the part number would be A-SA488430SLLG.

To order an Adder single-sided corner module that is 84" high and 30" deepwith a standard laminate worksurface and a light gray finish, the part numberwould be A-SC368430SLLG. (When ordering an “L” shaped configuration, 2 Starters must be used with a Corner Adder.)

A-SS (SINGLE-SIDED STARTER)Includes: 1 Starter assembly (see page 12)1 footrest2 outriggers1 worksurface assembly1 single-sided power beam (15 amp)1 open wire shelf, 12" depth1 light fixture assembly1 parabolic light diffuser

A-SC (SINGLE-SIDED CORNERADDER)Includes: 1 Adder assembly, 36" 1 outrigger1 corner worksurface assembly1 single-sided power beam (15 amp)1 open wire shelf, 12" depth1 light fixture assembly1 parabolic light diffuser

A-SA (SINGLE-SIDED ADDER)Includes: 1 Adder assembly (see page 12)1 footrest1 outrigger1 worksurface assembly1 single-sided power beam (15 amp)1 open wire shelf, 12" depth1 light fixture assembly1 parabolic light diffuser

A-DS (DOUBLE-SIDED STARTER)Includes: 1 Starter assembly (see page 12)2 footrests4 outriggers2 worksurface assemblies1 double-sided power beam (15 amp)2 open wire shelves, 12" depth2 light fixture assemblies2 parabolic light diffusers

A-DA (DOUBLE-SIDED ADDER)Includes: 1 Adder assembly (see page 12)2 footrests2 outriggers2 worksurface assemblies1 double-sided power beam (15 amp)2 open wire shelves, 12" depth2 light fixture assemblies2 parabolic light diffusers

A-DC (DOUBLE-SIDED CORNERADDER)Includes: 1 Adder assembly, 36" 2 outriggers2 corner worksurface assemblies1 double-sided power beam (15 amp)2 open wire shelves, 12" depth2 light fixture assemblies2 parabolic light diffusers

How to determine the number of Starter, Adder and Corner Easy-Ordermodules in a workstation configuration:

STARTER STARTER

CORNERADDER

ADDER

ADDER

PLEASE SPECIFY PAINT COLOR FOR ALL ORDERS –LIGHT GRAY (LG) OR SAND (SN)

Easy-Order Arlink® 8000 Workstations

Arlink® 8000 Worksurface AssembliesWorksurface L x D* Standard Laminate Static Dissipative

30" x 24" (76 x 61 cm) 4551 4551SD30" x 28" (76 x 71 cm) 8729 875430" x 30" (76 x 76 cm) 8730 875530" x 32" (76 x 81 cm) 8731 875630" x 34" (76 x 86 cm) 8732 875730" x 36" (76 x 91 cm) 8733 875836" x 24" (91 x 61 cm) 4351 4351SD36" x 28" (91 x 71 cm) 8924 899436" x 30" (91 x 76 cm) SA101 SA15536" x 32" (91 x 81 cm) SA102 SA15636" x 34" (91 x 86 cm) SA103 SA15736" x 36" (91 x 91 cm) SA104 SA15848" x 24" (122 x 61 cm) 4451 4451SD48" x 28" (122 x 71 cm) 8923 899248" x 30" (122 x 76 cm) SA105 SA15948" x 32" (122 x 81 cm) SA106 SA16048" x 34" (122 x 86 cm) SA107 SA16148" x 36" (122 x 91 cm) SA108 SA16260" x 24" (152 x 61 cm) 4651 4651SD60" x 28" (152 x 71 cm) 8620 862260" x 30" (152 x 76 cm) SA109 SA16360" x 32" (152 x 81 cm) SA110 SA16460" x 34" (152 x 86 cm) SA111 SA16560" x 36" (152 x 91 cm) SA112 SA16672" x 24" (183 x 61 cm) 4751 4751SD72" x 28" (183 x 71 cm) 8715 871672" x 30" (183 x 76 cm) SA113 SA16772" x 32" (183 x 81 cm) SA114 SA16872" x 34" (183 x 86 cm) SA115 SA16972" x 36" (183 x 91 cm) SA116 SA170*upright column adds 4" (10 cm) to overall workstation depth

Standard Static L x D Laminate Dissipative

36" x 24" (91 x 61 cm) 4951 4951SD36" x 28" (91 x 71 cm) 8812 881436" x 30" (91 x 76 cm) SA200 SA20436" x 32" (91 x 81 cm) SA201 SA20536" x 34" (91 x 86 cm) SA202 SA20636" x 36" (91 x 91 cm) SA203 SA20748" x 28" (122 x 71 cm) 8864 8865Y configuration for 28" d worksurface 8724 8724SDstraight back 28" (71 cm) 8800 8802round back 28" (71 cm) 8806 8808

Standard Static L x D Laminate Dissipative

36" x 60" (91 x 152 cm) 8869 886836" x 72" (91 x 183 cm) 8907 8835

WORKSURFACE ASSEMBLYWorksurface is constructed of 1" (2.5 cm) thick medium densityparticle board covered on topand all sides with non-glarematte finish plastic laminate.Under side is sealed with a plas-tic tension sheet to preventmoisture absorption, warpingand shedding. Assembly includesthreaded steel inserts, 2 worksurface support bracketsand 2 worksurface supportbeams.

See page 5 for details.

For integrated material transferworksurfaces, see page 5.

STATIC DISSIPATIVELAMINATE WORKSURFACE Plastic laminate provides a con-trolled path to ground for the dis-sipation of static electricity.Provided with a grounding kit.Static dissipative value is 106-109.

For grounding kit, see page 25.

For details and other work-surface materials, see page 5.

CORNER WORKSURFACE Construction is the same asother worksurfaces. Length is36" (91 cm). Assembly includesrequired brackets .

PENINSULA WORKSURFACEMounts on standard 36" (91 cm)module with support leg at front.

WORKSURFACE SUPPORT LEG Adjustable from 28" (71 cm) to34" (86 cm) high.

SPLIT BAY WORKSTATIONSplit bay workstation spans 2 modules with 1 worksurface.Select worksurface assemblyequal to the length of the com-bined modules. Select a split baybracket to join worksurfaceassembly to center column.

Description Use Part No.

corner leg support free-standing worksurface 8094front support leg increased load capacity, dampen vibration 8265worksurface leg for Y configuration 8723

Depth Description Part No.

28"-32" (71-81 cm) split bay bracket 810234"-36" (86-91 cm) split bay bracket 8115

8094

8102 8115

8265 8723

8724

8812

8800

8806


11

12


Build-Your-Own Arlink® 8000 Workstations

Designing a custom Arlink 8000 workstation is a simple and straightforward process. Start by selecting thestructural elements (Starter and Adder assemblies), add outriggers, choose a worksurface, and add the acces-sories that fulfill your needs.

In addition to the column heights shown, columns can be custom cut to any size you request. Modules in anycombination of sizes may be joined to create lines of unlimited length.

1. SELECT STARTERASSEMBLYThe Starter Assembly is the firstcomponent for each workstationand includes 2 columns withouter and inner trim, and aclosed stabilizer panel. Optionalopen stabilizer panel may beordered for full access from therear of the workstation (add theprefix "O" to the part number).

2. SELECT ADDERASSEMBLIESThe Adder Assembly for eachadjoining module includes a sin-gle column with outer and innertrim, and a closed stabilizerpanel. Optional open stabilizerpanel may be ordered for fullaccess from the rear of theworkstation (add the prefix "O"to the part number).

3. SELECT OPTIONALCOLUMN CAPGray plastic cap finishes off topof column. Comes included withall 54" (137 cm) high Starter andAdder Assemblies.

Module Length30" 36" 48" 60" 72"

Column Height 76 cm 91 cm 122 cm 152 cm 183 cm

30" (76 cm) 8692C30 8897C30 8896C30 8601C30 8702C3036" (91 cm) 8692C36 8897C36 8896C36 8601C36 8702C3654" (137 cm) 8692 8897 8896 8601 870272" (183 cm) 8694 8901 8900 8600 870084" (213 cm) 8696 8903 8902 8603 8704

Module Length30" 36" 48" 60" 72"



L x H Part No.

4" x 1 1⁄2" (10 x 4 cm) 8004

5. SELECT WORKSURFACEASSEMBLY – SEE PAGE 11

6. SELECT ACCESSORIES –SEE PAGES 14-25

4. SELECT OUTRIGGERSSee charts to right for uses.

8044 for worksurfaces 28"-32" deepand shelving 20"-22" deep

8040 heavy-duty, for worksurfaces28"-32" deep and shelving 20"-22" deep

8042 for shelving 12"-18" deep8041 for worksurfaces 34"-36" deep8043 for rear of single-sided applica-

tions, to increase stability

FOR APPLICATIONS USING WORKSURFACEWorksurface Depth

Outrigger Outrigger 28" 30" 32" 34" 36" SwivelLength 71 cm 76 cm 81 cm 86 cm 91 cm Footrest

22" (56 cm) 8044* • • • NA NA •23" (58 cm) 8040 • • • NA NA NA30" (76 cm) 8041* NA NA NA • • •4" (10 cm) 8043 • • • • • NA*slotted to accept swivel footrest (see page 21)

FOR APPLICATIONS USING SHELVING ONLYShelf Depth

Outrigger Outrigger 12" 14" 16" 18" 20" 22" 24"Length 30 cm 36 cm 41 cm 46 cm 51 cm 56 cm 61cm

22" (56 cm) 8044* NA NA NA NA • • •23" (58 cm) 8040 NA NA NA NA • • •15" (38 cm) 8042 • • • • NA NA NA4" (10 cm) 8043 • • • • • • •*slotted to accept swivel footrest (see page 21)

8044

8040

8042

8043

8041

13


Build-Your-Own Arlink® 8000 Mobile Workstations

All Arlink 8000 modules can be ordered in a mobile format, providing for easy relocation and smooth rolling ofworkstations, flow racks, or carts.

Designing a custom Arlink 8000 mobile workstation is a similar process to designing a stationary workstation.Start by choosing a base (either single-sided or double-sided), select structural elements (Starter and Adderassemblies), choose worksurface(s), and add the accessories that fulfill your needs. Maximum worksurfacedepth for mobile workstations is 30". In addition to the column heights shown, columns can be custom cut toany size you request. Modules in any combination of sizes may be joined to create lines of unlimited length.

1. SELECT MOBILESTARTER BASEBase consists of mobile baseframe, 2 swivel 4" locking and 2 swivel 4" non-locking casters,mobile outriggers and allrequired hardware. Single-sidedbase is 34" (86 cm) deep; double-sided base is 54" (137 cm) deep.

2. SELECT MATCHINGSTARTER ASSEMBLYThe Starter Assembly includes 2 columns with outer and innertrim and a closed stabilizerpanel. Optional open stabilizerpanel may be ordered for fullaccess from the rear of theworkstation (add the prefix "O"to the part number).

3. SELECT MOBILE ADDERBASEBase consists of mobile baseframe, 1 swivel 4" locking and 1 swivel 4" non-locking caster,mobile outrigger(s) and allrequired hardware. Adder basesmust always be mounted on theright-hand side of a single-sidedStarter base.

Module Length30" 36" 48" 60" 72"

Description 76 cm 91 cm 122 cm 152 cm 183 cm

single-sided 8313SS 8969SS 8968SS 8668SS 8768SSdouble-sided 8313DS 8967DS 8974DS 8669DS 8769DS

Module Length30" 36" 48" 60" 72"



Module Length30" 36" 48" 60" 72"


single-sided 8313SA 8969SA 8968SA 8668SA 8768SAdouble-sided 8313DA 8967DA 8974DA 8669DA 8769DA

5. SELECT OPTIONALCOLUMN CAP – SEE P. 12

6. SELECT WORKSURFACEASSEMBLY – SEE P. 11Maximum worksurface depth is30" for mobile workstations.

7. SELECT ACCESSORIES –SEE PP. 14-25

4. SELECT MATCHINGADDER ASSEMBLYThe Adder Assembly for eachadjoining module includes a sin-gle column with outer and innertrim and a closed stabilizerpanel. Optional open stabilizerpanel may be ordered for fullaccess from the rear of theworkstation (add the prefix "O"to the part number).

Module Length30" 36" 48" 60" 72"



Single-sided Starter

Double-sidedStarter

Single-sided Adder

Double-sidedAdder

L x H Part No.

4" x 1 1⁄2" (10 x 4 cm) 8004

Jim Norton

CPS Banner-Lista

14

OPEN WIRE SHELFWelded steel wire shelf haschrome plated finish. Adjustsvertically in 3" (7.5 cm) incre-ments and adjusts horizontally15° and 30°. Includes front lip(can be oriented up or down).Weight capacity 150 lbs. (68 kg).Mounts in Macro slots.

LAB STYLE WIRE SHELFLab Style wire shelves are 9"deep to accommodate normal-sized work boxes and sampletrays. They have cross wirewelded on underside of shelf, sowork boxes slide easily alonglength of shelf when front lip isfacing up. Weight capacity 150lbs. (68 kg). Mounts in Macroslots.

WIRE SHELF DIVIDERShelf divider snaps into place.For open wire shelf only.

STEEL SHELFSturdy steel shelf adjusts verti-cally in 3" (7.5 cm) incrementsand adjusts horizontally 15° and30°. Weight capacity is 300 lbs. (136 kg). Includes color trim(color matches column trim).Mounts in Macro slots.

STEEL SHELF DIVIDERShelf divider mounts on shelfwith 2 screws. 8" (20 cm) tall.

STEEL SHELF LIPShelf lip mounts to front of shelfand can be positioned at heightof either 5⁄8" (1.5 cm) or 1 1⁄2" (4 cm).

L x D Part No.

30" x 12" (76 x 30 cm) 888436" x 12" (91 x 30 cm) 892748" x 12" (122 x 30 cm) 892560" x 12" (152 x 30 cm) 862572" x 12" (183 x 30 cm) 8725

L x D Part No.

30" x 9" (76 x 23 cm) 458136" x 9" (91 x 23 cm) 438148" x 9" (122 x 23 cm) 448160" x 9" (152 x 23 cm) 468172" x 9" (183 x 23 cm) 4781

Height Part No.

12" (30 cm) 8145

Depth12" 14" 16" 18" 20" 22"

Length 30 cm 36 cm 41 cm 46 cm 51 cm 56 cm

30" (76 cm) 8285 8286 8287 8288 8289 829036" (91 cm) 8321 8331 8341 8351 8361 836348" (122 cm) 8320 8330 8340 8350 8360 836260" (152 cm) 8482 - 8484 - 8486 -72" (183 cm) 8592 - 8593 - 8594 -

For Shelf Depth Part No.

12"-14" (30-36 cm) 831916"-18" (41-46 cm) 833918"-20" (46-51 cm) 8349

For Shelf Length Part No.

30" (76 cm) 831136" (91 cm) 838648" (122 cm) 838760" (152 cm) 844872" (183 cm) 8595

Shelves, Shelf Accessories, Overhead Cabinet


L x D With Lip Without Lip*

30" x 18" (76 x 46 cm) 8312 458336" x 18" (91 x 46 cm) 8328 438348" x 18" (122 x 46 cm) 8327 448360" x 18" (152 x 46 cm) 8497 468330" x 24" (76 x 61 cm) 8314 458436" x 24" (91 x 61 cm) 8355 438448" x 24" (122 x 61 cm) 8354 4484*accepts wire shelf dividers (see below)

Length Part No.

30" (76 cm) 829836" (91 cm) 831648" (122 cm) 831560" (152 cm) 845572" (183 cm) 8590

L x D Part No.

30" x 22" (76 x 56 cm) 825636" x 22" (91 x 56 cm) 825748" x 22" (122 x 56 cm) 8268

15


H x D Part No.

6" x 18" (15 x 46 cm) 41686" x 24" (15 x 61 cm) 417210" x 18" (25 x 46 cm) 416910" x 24" (25 x 61 cm) 417318" x 18" (46 x 46 cm) 417018" x 24" (46 x 61 cm) 4174

VARIABLE ANGLE SHELFShelf mounts in forward, center,or set back position. Adjustsvariably from totally flat to 25° angle and has a full perime-ter lip. 150 lb. (68 kg) capacity.Mounts in Micro slots.

Shelf without lip is similar tovariable angle shelf but includespre-punched holes to acceptvertical wire dividers (see below).

SHELF DIVIDER FOR VARIABLE ANGLESHELVES WITHOUT LIPSDivider is 1⁄4" diameter galva-nized wire that fits into pre-punched holes in the shelf. Nohardware required. Depth mustmatch shelf depth.

SLOPING DOCUMENTSHELF15° vertical steel shelf is 12" (30 cm) high and has a 2" (5 cm)lip to hold books, manuals,drawings, etc. Mounts in Microslots.

SERVER SHELF ON CASTERSThe mobile server shelf, whichsits on the floor, is 2 1⁄2" (6 cm)high, and is mounted on 1" (2.5 cm)casters. Load capacity is 250 lb.(113 kg) evenly distributed.

OVERHEAD CABINETSteel cabinet with retractablelocking door. Includes mountingbrackets, lock and 2 keys.Mounts in Micro slots.

L x D x H Part No.

30" x 15" x 16" (76 x 38 x 41 cm) 829736" x 15" x 16" (91 x 38 x 41 cm) 895648" x 15" x 16" (122 x 38 x 41 cm) 895560" x 15" x 16" (152 x 38 x 41 cm) 8650

16


DUAL LAMPFLUORESCENT LIGHTFIXTURE ASSEMBLYEconomical twin tube fluores-cent light fixture. Uses energy-saving T8 lamps and electronicballasts. Comes complete with(2) 32 watt lamps and parabolicdiffuser. Mounts in Macro slotsover worksurface with 14" (36 cm), 19" (48 cm) or 26" (66 cm) light brackets. Color trimattaches to front lip of fixture.Includes 9' power cord.

SWITCHABLE 2/4 LAMPFLUORESCENT LIGHT Switchable 2 or 4 tube fluores-cent light fixture allows user toselect light intensity according to the task. Uses energy saving T8 lamps and electronic ballasts.Comes complete with (4) 32 wattlamps and acrylic diffuser.Fixture tilts up or down 10°.Mounts in Macro slots overworksurface with 14" (36 cm),19" (48 cm) or 26" (66 cm) lightbrackets. Includes 9' powercord.

PARABOLIC DIFFUSERFor 2/4 lamp lights. Optionalchrome plated plastic parabolicgrid directs light onto worksur-face while eliminating glare onadjacent workstations. Replacesacrylic diffuser that is includedwith light fixture assembly.

Length Part No.

36" (91 cm) 437648" (122 cm) 4476for 60" (152 cm) and 72" (183 cm) lights 4676

Fixture Bracket DepthLength 14" (36 cm) 19" (48 cm) 26" (66 cm)

36" (91 cm) 4375S 4375L 4375XL48" (122 cm) 4475S 4475L 4475XL60" (152 cm) 4675S 4675L 4675XL72" (183 cm) 4775S 4775L 4775XL

Fixture Bracket DepthLength 14" (36 cm) 19" (48 cm) 26" (66 cm)

30" (76 cm) 8511S 8511L 8511XL36" (91 cm) 8533S 8533L 8533XL48" (122 cm) 8534S 8534L 8534XL60" (152 cm) 8655S 8655L 8655XL72" (183 cm) 8784S 8784L 8784XL

Lighting Accessories

Jim Norton

CPS Banner-Lista

PEGBOARD PANELSturdy painted steel pegboardpanel, ideal for hanging tools,etc. Mounts in Micro slots. 18" (46 cm) high.

LOUVERED PANELSturdy painted steel louveredpanel designed to hold plasticbin boxes, tool or supply hold-ers. Mounts in Micro slots. 18" (46 cm) high.

REVERSIBLEMARKERBOARD/TACKBOARDTwo-sided reversible board.Features white magnetic marker-board on one side and gray fab-ric tackboard on the other. Alsofunctions as privacy panel andsound dampener. Mounts inMicro slots. 30" (76 cm) high.

MODESTY PANELSteel or fabric-covered modestypanel is typically positionedabove the worksurface, and actsas a privacy screen. Steel pan-els can be used as fill-in panel ormagnet panel to hold instructionsor drawings. Fabric-coveredmodesty panel acts as tackboard and sound dampener.Standard fabric color is gray.Other colors available onrequest.

WORKSURFACE BACK STOPSteel back stop prevents itemsfrom rolling off worksurface. Mounts in Micro slots. 3" (8 cm) high.

Panel Steel Panel Ht. Fabric-Covered Panel Ht.Length 10" (25 cm) 20" (51 cm) 20" (51 cm)

30" (76 cm) 8137 8138 813936" (91 cm) 8032 8033 803648" (122 cm) 8030 8031 804860" (152 cm) 8452 8453 846272" (183 cm) 8581 8582 8586

Length Part No.

30" (76 cm) 833336" (91 cm) 833448" (122 cm) 833560" (152 cm) 833672" (183 cm) 8337

Length Part No.

30" (76 cm) 844236" (91 cm) 844348" (122 cm) 844460" (152 cm) 844572" (183 cm) 8447

Length Part No.

30" (76 cm) 877136" (91 cm) 877248" (122 cm) 8773

Length Part No.

30" (76 cm) 844936" (91 cm) 846148" (122 cm) 846360" (152 cm) 846672" (183 cm) 8468

17


Panels

Description Part No.

single outlet 4866


15 amp, 6 outlets 894220 amp, 6 outlets 894315 amp GFCI, 6 outlets 894720 amp GFCI, 6 outlets 8948

Length Single-Sided Double-Sided

30" (76 cm) 8858 885936" (91 cm) 8870 887248" (122 cm) 8871 887360" (152 cm) 8653 865272" (183 cm) 8752 8753


30" (76 cm) 8879 885336" (91 cm) 8949 897748" (122 cm) 8950 897860" (152 cm) 8951 866072" (183 cm) 8750 8751


18

Utility Accessories

HORIZONTAL POWERBEAMAvailable in single- or double-sided configuration. Each sidehas 8 receptacles, lighted powerswitch and 15 amp or 20 ampbreaker. Mounts in Micro slots.Includes 7 1⁄2' power cord.

POWER BEAM WITHLIGHT SWITCHAvailable in single- or double-sided configuration. Providedwith separate on/off switch forlight which allows remainder ofbeam to be left powered. 7 out-lets per side. 15 amp standard.Mounts in Micro slots. Includes7 1⁄2' power cord.

VERTICAL POWER STRIPAvailable in 15 amp or 20 amp,and GFCI. Lighted on/off switch,6' cord with grounded plug andcircuit breaker included. Paintedblack. Mounts vertically to frontand back of Micro slots. Bracketand hardware supplied.

DATA BEAMModular data beams feature 4 duplex-style outlets with 8 ports that accept modularsnap-in/snap-out jacks or con-nectors for data, video, or audioconnectivity. Beams come withoutlets, but jacks/connectorsmust be purchased separately.On-site wiring for ports isresponsibility of customer.Contact Lista for additional specifying assistance.

AIR BEAMAir beam is supplied with:

• (1) 1⁄4" NPT female inlet ontop

• (3) 1⁄4" NPT female outlets on front (single-sided) and (3) 1⁄4" NPT female outlets perside (double-sided)

• (2) end mounted jumpers

Mounts in Micro slots.

AIR SUPPLY BRACKETSupplied with (1) 1⁄4" NPT femaleoutlet. Mounts under worksur-face to worksurface supportbeam.


30" (76 cm) 8860 886236" (91 cm) 8937 894448" (122 cm) 8930 893160" (152 cm) 8647 864872" (183 cm) 8745 8746

Single-Sided Double-Sided Single-SidedLength 15 Amp 15 Amp 20 Amp

30" (76 cm) 8876 8877 887536" (91 cm) 8941 8946 895948" (122 cm) 8940 8945 899160" (152 cm) 8640 8645 865772" (183 cm) 8740 8741 8743

19


PELICAN® DRAWERSecure storage for legal hangingfiles or personal effects, plussegmented tray for supplies.Allows easy clearance for user’sknees. Thermo-formed poly-styrene body with polyurethanedrawer face. Mounts underworksurface, and can slide toany horizontal position. Includesconcealed ball bearing slides andlocking system.

TOTE BOX WITH HOLDERSlides into tote box holder whichmounts under worksurface, andcan slide to any horizontal posi-tion. Comes with tote box holderand hangers.

TOTE BOX WITH PULL-OUTWORKSURFACESimilar to tote box with holderbut with additional 10" (25 cm) x24" (61 cm) pull-out work sur-face. Weight capacity of 75 lbs.

For companion stationary and mobile drawer storagecabinets, see page 35.

Drawer Height Part No.

1 drawer 6 1⁄4" (16 cm) 88411 drawer (shallow)* 3" (8 cm) 48502 drawer 13" (33 cm) 88443 drawer 19 1⁄2" (50 cm) 8843box/file drawer 19 1⁄2" (50 cm) 8842*no lock available

HANGING DRAWERASSEMBLYSteel drawer mounts underworksurface, and can slide toany horizontal position. Includessteel ball bearings, recessedhandles and drawer stops. 100% full extension. Eachdrawer comes with a lock andeach assembly comes with 2 keys, except as noted.Includes mounting brackets.

Height HeightW x D (Front) (Back) Part No.

19 1⁄2" x 24" (50 x 61 cm) 2 1⁄4" (6 cm) 10" (25 cm) 8845

W x D x H Part No.

11" x 17" x 6" (28 x 43 x 15 cm) 8998

8841

4850

8844

8843

8842

W x D x H Part No.

11" x 17" x 8" (28 x 43 x 20 cm) 8850

Hanging Drawers

Jim Norton

CPS Banner-Lista


20

L x D x H Part No.

30" x 4" x 2" (76 x 10 x 5 cm) 829936" x 4" x 2" (91 x 10 x 5 cm) 824748" x 4" x 2" (122 x 10 x 5 cm) 824660" x 4" x 2" (152 x 10 x 5 cm) 844672" x 4" x 2" (183 x 10 x 5 cm) 8578

L x D x H Part No.


DepthLength 2" (5 cm) 4" (10 cm) 6" (15 cm)

30" (76 cm) 8293 8294 829536" (91 cm) 8243 8244 824548" (122 cm) 8240 8241 824260" (152 cm) 8478 8479 848072" (183 cm) 8575 8576 8577

8276 8277

8275 4863

8281

UTILITY BINFull length steel bin holds tools,bottles, wipes, reeled solder dis-penser, etc. Front edge can beused as a parts bin rail. Mountsin Micro slots.

LOCKABLE TOOL BOXFull length steel tool box storestools and other valuables. Comeswith lock and key. Mounts inMicro slots.

FIXED LIGHT DUTY PARTS BIN RAILLight duty parts bin rail is idealfor smaller/lighter componentsand where space efficiency is apriority. Three depths providefor compact tiered placementand allow access to all binswithout interference. Chromefinish. Mounts in Micro slots.(Bins not included.)

TILTABLE HEAVY DUTYPARTS BIN RAILHeavy duty parts bin rail holdsheavier items such as hardware,fittings, etc. Rail also tilts to 15°angle. Mounts in Micro slots.(Bins not included.)

TOOL AND ACCESSORYHOLDERSTool and accessory holders addconvenience to the workplace.They hang on the parts bin railand can be positioned for easyreach. Airgun holder mounts toworksurface support beam.

WIRE HOLDER ASSEMBLYAND GUIDESAssembly includes supportbrackets (pair) which mount intoMicro slots, and wire holder –3⁄4" (2 cm) tube with threadedinserts.

WIRE GUIDEChrome plated bar with severalholes, guides wire on the jobwithout tangling or de-railing.

Description Size Part No.

solder spool holder 5" x 5" (13 x 13 cm) 8276tool holder 3" x 5" (8 x 13 cm) 8277Kim Wipe holder 5" x 5" (13 x 13 cm) 8275airgun holder 1 1⁄2" x 1 1⁄2" with 1" diam. hole 4863bottle holder 3" (8 cm) inside diam. 8281

Length Part No.

30" (76 cm) 822336" (91 cm) 822548" (122 cm) 822660" (152 cm) 847572" (183 cm) 8546

Storage Accessories

Length Wire Holder Assembly Wire Guide

30" (76 cm) 8886 830136" (91 cm) 8928 827448" (122 cm) 8929 827360" (152 cm) 8685 847172" (183 cm) 8785 8583

21


TOOL GLIDE TRACK ANDTROLLEY ASSEMBLYSmooth-moving glide keepselectric and pneumatic toolsproperly positioned. If used inconjunction with fluorescentlight assembly, glide trackmounts on brackets for fluores-cent lights. If used alone, mount-ing brackets must be orderedseparately (see below).

MOUNTING BRACKETSUsed to mount tool track when a light fixture assembly is notused or needed. Come in pairs.

TURBO TRAYMolded of durable plastic with24 compartments. Rotates onheavy-duty ball bearing. Notstatic dissipative.

SWIVEL FOOTRESTDrops into slots on 8044 and8041 slotted outriggers.Adjustable to suit worker at individual benches. Includescolor trim.

FREESTANDING FOOTRESTErgonomic footrest is heightadjustable from 3" (8 cm) to 12" (30 cm). Platform is 15" (38 cm) deep by 21 3⁄4" (55 cm)wide. Adjusts 0 to 25°. Includesribbed rubber mat.

Diameter Height Part No.

30" (76 cm) 4 1⁄2" (11 cm) 8510

Length Part No.

30" (76 cm) 895836" (91 cm) 897548" (122 cm) 897660" (152 cm) 863372" (183 cm) 8728


tool trolley only 8184

Depth Part No.

14" (36 cm) 819919" (48 cm) 819626" (66 cm) 8182

Tool Accessories, Footrests

8184

L x D Part No.

20" x 14" (51 x 36 cm) 890920" x 14" (51 x 36 cm) 8909SD**freestanding with ground snap for static dissipative environments

Length Part No.

30" (76 cm) 888536" (91 cm) 891148" (122 cm) 891060" (152 cm) 861072" (183 cm) 8710

Jim Norton

CPS Banner-Lista

22


Description W x D Part No.

monitor shelf with keyboard holder 12 3⁄8" x 12 3⁄8" (31 x 31 cm) 8878optional mouse tray 9 1⁄2" x 7 5⁄8" (24 x 19 cm) 8895

Description For Swing Arms Part No.

standard 8408, 8416, 8410 8420heavy duty 8410 8423

UNIVERSAL BRACKETStandard hinge-type bracket8420 is made of cast zinc alu-minum alloy. Mounts in Macroslots and is vertically adjustablein 3" (8 cm) increments.

Heavy-duty bracket 8423 iswelded steel. Bolts through col-umn and is vertically adjustablein 3" increments.

SWING ARMCast 8" and 16" swing arms canbe linked together in variouscombinations to achieve desiredlength. When 8" and 16" arms arelinked, load capacity is 20 lbs. (9 kg). Contact your Lista repre-sentative for other combinedload capacities.

Tubular swing arm is 18" overalllength. Weight capacity is 75 lbs34 kg). Can mount left or right.Requires universal bracket formounting (see above).

MONITOR SHELF WITHKEYBOARD HOLDERHolds computer monitor.Includes retractable wire key-board holder. Requires universalbracket, ordered separately (seeabove).

Optional mouse tray attaches to monitor shelf with keyboardholder. Holds mouse/mouse pad.

Size Load Capacity For Brackets Part No.

cast 8" (20 cm) 60 lbs. (27 kg) 8420 8408cast 16" (41 cm) 40 lbs. (18 kg) 8420 8416tubular 18" (46 cm) 75 lbs. (34 kg) 8420, 8423 8410

8408 8416

8410

84238420

Swing Arm System

Jim Norton

CPS Banner-Lista

23


ACCESSORY SHELFFor easy access to small tools,instruments, parts, etc. Ribbedmat optional (see below). 75 lb.(34 kg) capacity. Requires univer-sal bracket, ordered separately(see page 22).

RIBBED RUBBER MATMat fits accessory shelf. Pro-vides soft, slip resistant surface.

PARTS BIN RACKHolds industry-standard plasticparts bins (not included).Requires universal bracket and 8410 swing arm, orderedseparately (see page 22).

BIN CONTAINERHolds 3 rows of parts bins foreasy access to parts and com-ponents. Interior space per shelfis 20" (51 cm) x 6" (15 cm) deep.Top shelf is 3 1⁄4" (8 cm) high;second and third shelves are 3 3⁄4" (9.5 cm) high. Requiresaccessory shelf for support (notincluded – see above), or can beused freestanding. 50 lb. (23 kg)capacity. Does not include binboxes.

PARTS BIN BOXESBlue plastic bin fits in rack or onrail and slides to position. Con-ductive bin is black.

EQUIPMENT SHELFHolds a variety of customer sup-plied equipment or tools. 75 lb.(34 kg) capacity. Requires univer-sal bracket, ordered separately(see page 22).

DOCUMENT HOLDERFor displaying papers, plans, etc.Includes lip for pencils, pens,etc. Requires universal bracket,ordered separately (see page 22).Document holder 8918 alsorequires either 8408 or 8416 cast swing arm.

W x D Part No.

21 1⁄4" x 7 3⁄8" (54 x 19 cm) 8887


ribbed rubber mat 8759

L x D Part No.

12 3⁄8" x 12 3⁄8" (31 x 31 cm) 8857


bin container 8888

Description W x D Part No.

small document holder 11 7⁄8" x 13 3⁄4" (30 x 35 cm) 8666large document holder 25 5⁄8" x 13 3⁄4" (65 x 35 cm) 8670document holder 12" x 14" (30 x 36 cm) 8918**document holder only; requires either 8408 or 8416 cast swing arm

L x H Part No.

18" x 10" (46 x 25 cm) 8432

L x D x H Conductive Non-Conductive

4 1⁄2" x 4" x 3" (11 x 10 x 8 cm) 8252 82535 1⁄2" x 4" x 3" (14 x 10 x 8 cm) 8250 82547 1⁄2" x 4" x 3" (19 x 10 x 8 cm) 8251 8255

Jim Norton

CPS Banner-Lista

24


Description w x d Part No.

pullout for keyboard only 21" x 10" (53 x 25 cm) 8437pullout for keyboard and mouse 28" x 10" (71 x 25 cm) 8450swivel for keyboard only 21" x 10" (53 x 25 cm) 8438swivel for keyboard and mouse 28" x 10" (71 x 25 cm) 8451for use with swing arm system 24" x 10" (61 x 25 cm) 8414

CPU HOLDERAllows CPU to be mountedunder worksurface (off of floor),with access to rear of CPU.Mounts under worksurface, and can slide to any horizontalposition.

PULLOUT CPU HOLDERSame as above, but pulls out onball bearing slides.

KEYBOARD HOLDERPullout keyboard holder allowscomputer keyboard to be storedunder worksurface when not inuse.

Swivel holder pivots horizontallyand vertically to provide maxi-mum ergonomic comfort.

8414 provides room for mouseand keyboard. Requires 8408 or8416 cast swing arm and univer-sal bracket (see page 22).

FLAT PANEL MONITORBRACKETFor use with flat panel monitors.8422 mounts on 8408 or 8416cast swing arm (see page 22).

8415 mounts in Macro slots, isvertically adjustable in 3" (8 cm)increments, swings left andright, and has 2 articulatingpoints.

8628 extender allows positioningof monitor screen away fromadjacent accessories.

CABLE TRAYTray neatly gathers bundles ofhorizontal loose wires and pro-vides random access for cablerouting along its length. Paintedblack. Mounts in Micro slots.

VERTICAL CABLE CLIPNeatly gathers bundles of verti-cal loose wires. Painted black.Mounts in Micro slots.

W x D x H Part No.

9 1⁄2" x 22" x 19" (24 x 56 x 48 cm) 8440

W x D x H Part No.

9 1⁄2" x 22" x 19" (24 x 56 x 48 cm) 8439

8414

8438

8437

W x D Part No.

3" x 3" (8 x 8 cm) 8391

L x D x H Part No.


8422


attaches to swing arm assembly 8422attaches to column 84159" (23 cm) bracket extender 8628

Computing Accessories

8628

8415

25


ESD Accessories

WORKSURFACEGROUNDING KITKit is supplied with all static dis-sipative worksurfaces. 8' cordincludes 1 meg. ohm resistor.

DUAL WRIST STRAPRECEPTACLEMounts under worksurface toworksurface support beams.Dual plugs accept operator’s andsupervisor’s wrist strap at sametime.

COMMON POINT GROUNDBLOCKTwo connection sides – direct toground and 1 meg. ohm resistorin series to ground.

ESD MAT KIT Kit includes either a durable 2-layer rubber mat or a 3-layervinyl mat. Includes wrist strapand dual receptacle. Mats avail-able in gray or blue.

Rubber mat resistance is Rtg <8 x106 ohms, Rtt <2 x 107 ohms.

Vinyl mat resistance is Rtg <1.7 x107 ohms, Rtt <2.8 x 107 ohms.

Part No.

SC10


dual wrist strap receptacle SC12wrist strap with 6' coil cord SC15

Part No.

SC14

Rubber Rubber Vinyl VinylW x D (gray) (blue) (gray) (blue)

36" x 24" (91 x 61 cm) 6436G 6436B 6236G 6236B48" x 24" (122 x 61 cm) 6448G 6448B 6248G 6248B60" x 24" (152 x 61 cm) 6460G 6460B 6260G 6260B72" x 24" (183 x 61 cm) 6472G 6472B 6272G 6272B

Jim Norton

CPS Banner-Lista

26


Description Module Length Part No.

single sided 30" (76 cm) 8326SSsingle sided 36" (91 cm) 8915SSsingle sided 48" (122 cm) 8964SSdouble sided 30" (76 cm) 8326DSdouble sided 36" (91 cm) 8915DSdouble sided 48" (122 cm) 8964DS

UTILITY AND PARTS CARTSingle- or double-sided modularcarts can be configured with anycombination of shelves, partsbins, utility bins, etc. to meetyour exact needs. All are con-structed using Lista’s standardArlink 8000 column to allowcomplete interchangeability ofcomponents with workstations.54" (137 cm) high. Carts feature 2 wheel-locking and 2 non-locking casters, 3 1⁄2" (9 cm)diameter. Wheels are rubber,non-marking. Maximum shelfdepth for parts cart is 14" (36 cm).

For accessories for utility andparts carts, see pages 14-25.

Arlink® 8000 Utility and Parts Carts

Jim Norton

CPS Banner-Lista

27


Arlink® 8000 Flow Rack Workstations, Progressive Assembly Systems

Flow racks can be used to stage and deliver parts utilizing gravity, reducing material handling time and costs.Bins or totes are loaded on flow rack frames from the rear, and as operators remove one from the front, a newbin glides forward on rollers. Similarly, flow rack frames can be inclined away from an operator to allowremoval of completed work.

Flow racks are constructed utilizing the same Starter and Adder system common to all Arlink 8000 worksta-tions, and worksurface assemblies and accessories as shown in this catalog can be added to create a com-plete parts presentation and integrated workstation system. Ball transfer tables and other material handlingworksurfaces (see page 5) or conveyors (see page 7) may also be integrated into the worksurface as needed,and flow racks can be made mobile by the addition of caster sets.

Flow rack modules may be joined side by side, using Starter and Adder assemblies to achieve any overalllength and combination of module sizes.

Arlink 8000 flow racks modules are available in 4 standard lengths from 36" (91 cm) to 72" (183 cm).

Flow racks are height adjustable in 1" increments. The flow rack angle is adjustable.

FLOW RACK STARTERASSEMBLYConsists of 2 Starter assemblies,2 outriggers, 1 flow rack assem-bly and 4 connectors.

FLOW RACK ADDERASSEMBLYConsists of 2 Adder assemblies,1 outrigger, 1 flow rack assemblyand 2 connectors.

FLOW RACK ASSEMBLYONLYConsists of 1 flow rack assembly.

L x D x H 72" High 84" High

36" x 48" (91 x 122 cm) FRS3672 FRS368448" x 48"(122 x 122 cm) FRS4872 FRS488460" x 48" (152 x 122 cm) FRS6072 FRS608472" x 48" (183 x 122 cm) FRS7272 FRS7284

L x D x H 72" High 84" High

36" x 48" x 72" (91 x 122 x 183 cm) FRA3672 FRA368448" x 48" x 72" (122 x 122 x 183 cm) FRA4872 FRA488460" x 48" x 72" (152 x 122 x 183 cm) FRA6072 FRA608472" x 48" x 72" (183 x 122 x 183 cm) FRA7272 FRA7284

L x D x H Part No.

36" x 48" x 3" (91 x 122 x 8 cm) FR3648" x 48" x 3" (122 x 122 x 8 cm) FR4860" x 48" x 3" (152 x 122 x 8 cm) FR6072" x 48" x 3" (183 x 122 x 8 cm) FR72

SHELF MOUNTConsists of 2 aluminum sliderails, 2 channel rails, 2 joiner pinsand 1 chrome plated part trough.Shelves must be ordered sepa-rately (see page 14).

BENCH TOPConsists of 2 steel end supports(left and right), 2 channel rails, 1 stiffener panel, 2 aluminumslide rails and 2 joiner pins. Basefootprint size 36" wide x 20" deep(91 cm x 51 cm).

Shelf LengthShelf Depth 36" (91 cm) 48" (122 cm) 60" (152 cm)

18" (46 cm) 8936-18 8935-18 8637-1820" (51 cm) 8936-20 8935-20 8637-2022" (56 cm) 8936-22 8935-22 -

Description Module Length Part No.

bench top progressive assembly system 36" (91 cm) 8979bench top progressive assembly system 48" (122 cm) 8980bench top progressive assembly system 60" (152 cm) 8690additional side rail 36" (91 cm) 8379additional side rail 48" (122 cm) 8380additional side rail 60" (152 cm) 8476parts bin rail supports (pair) 24" (61 cm) 8505

PROGRESSIVE ASSEMBLY SYSTEMDesigned for transportation of circuit boards or other panelized items, not to exceed 15" (38 cm) wide and 3⁄8" (.95 cm) thick. Two versions are available.

Technical Furniture and Workstation Systemscustom-products.com/Industrial.nsf/get/PDF-Default-LISTA+CATALOGS/... · Technical Furniture and Workstation Systems ... productivity and

Documents