-
TB Wire 1532 - Issue 2.doc
The information contained herein is based on data considered
accurate and is offered at no charge. No warranty is expressed or
implied regarding the Accuracy of this data. Liabilityis expressly
disclaimed for any loss or injury arising out of this information
or the use of any materials
designed.________________________________________________________________________________________________________________________________________________
European Headquarters Regional Offices: Belgium: Tel: +32 (0) 14
44 50 00Cookson Electronics Assembly Materials France: Tel: +33 (0)
2 41 49 00 11Tandem House, Marlowe Way Germany: Tel: +49 (0) 203
55540Beddington Farm Road, Croydon Ireland: Tel: +353 (0) 1 842
1172CR0 4XS. England. Italy: Tel: +39 (0) 2 38 33 11Tel: +44 (0)20
8665 6666 Hungary: Tel: +36 (0) 24 460 72 0Fax: +44 (0)20 8665 4695
Netherlands: Tel: +31 (0) 35 695 5411www.alphametals.com
TECHNICAL BULLETIN
ALPHA FLUITIN 1532No-Clean Cored Solder Wire
Type: J-STD-004 - ROM1 / IPC-SF-818 - M3CN / ISO 12224 -
1.1.2
GENERAL DESCRIPTIONAlpha Fluitin 1532 is an activated rosin
coredsolder wire developed for general hand solderingapplications.
The unique activator system offersgood thermal stability at
pre-solderingtemperatures ensuring that Fluitin 1532
performsextremely well on parts and surfaces whichpresent poor or
difficult soldering conditions.
Fluitin 1532 leaves post-soldering residues thatare hard and
which can be safely left without theneed to remove them. If the
removal of residuesis required, then semi-aqueous or aqueoussystems
can be used effectively.
FEATURES & BENEFITS� Minimal, non-corrosive, clear and
safe
residues.� Very fast wetting.� Good spread characteristics.�
Pleasant pine smell.� Ease of solderability.� Provides good joint
appearance.� Available in 1.1%, 1.4%, & 2.2% flux contents.
TECHNICAL SPECIFICATIONPhysical Properties Typical ValuesRosin
Grade: WW per Fed Spec.
LL-R-626Rosin Softening Point: 71ºC (160ºF)Acid Value: 170-190
(mg KOH/g)Halide Content: 0.80 - 1.10% (by weight)Corrosiveness:
Classified to J-STD-004
as M type material.Copper Mirror: Classified to J-STD-004
as1E8 Ohms)
Classification: J-STD-004 - ROM1IPC-SF-818 - M3CNISO 12224 -
1.1.2.
Solder Alloys Available:Standard Alloy
DesignationMelting orSolidus /LiquidusTemp ºC
ISO 9453 (1) S-Sn63Pb37 183ISO 9453 (2) S-Sn60Pb40 183-190ISO
9453 (3) S-Sn50Pb50 183-215ISO 9453 (5) S-Pb60Sn40 183-235ISO 9453
(22) S-Sn50Pb32Cd18 145ISO 9453 (25) S-Sn60Pb38Cu2 183-190ISO 9453
(26) S-Sn50Pb49Cu1 183-215ISO 9453 (30) S-Sn62Pb36Ag2 178-190ISO
9453 (34) S-Pb93Sn5Ag2 296-301ISO 9453 (23) S-Sn99Cu1 231ISO 9453
(24) S-Sn97Cu3 230-250ISO 9453 (29) S-Sn97Ag3 221
SAC 305 215-218
APPLICATION GUIDELINESFluitin 1532 is suitable for use in any
commercialno-clean hand soldering application that
specifiescompliance to J-STD-004 - ROM1 standard.
It is suited to such areas of industry (subject to theabove
criteria) as TV, Audio equipment, Video /DVD, games box and all
types of householdappliances.
-
TB Wire 1532 - Issue 2.doc
The information contained herein is based on data considered
accurate and is offered at no charge. No warranty is expressed or
implied regarding the Accuracy of this data. Liabilityis expressly
disclaimed for any loss or injury arising out of this information
or the use of any materials
designed.________________________________________________________________________________________________________________________________________________
European Headquarters Regional Offices: Belgium: Tel: +32 (0) 14
44 50 00Cookson Electronics Assembly Materials France: Tel: +33 (0)
2 41 49 00 11Tandem House, Marlowe Way Germany: Tel: +49 (0) 203
55540Beddington Farm Road, Croydon Ireland: Tel: +353 (0) 1 842
1172CR0 4XS. England. Italy: Tel: +39 (0) 2 38 33 11Tel: +44 (0)20
8665 6666 Hungary: Tel: +36 (0) 24 460 72 0Fax: +44 (0)20 8665 4695
Netherlands: Tel: +31 (0) 35 695 5411www.alphametals.com
HINTS & TIPS ON SOLDERING INGENERALAlways remember that a
soldered joint is formedby heating the parts to be soldered to
atemperature in excess of the melting point of thealloy to be used
- in hand soldering this is how asoldering iron is used. By feeding
the cored wireonto the parts, the flux is able to flow and
removeoxide films, whilst the solder creates a thinintermetallic
bond which becomes the solder joint.
Note the following tips:1. Use a soldering iron bit size and
form to suit
the operation: small bits for soldering largecomponents may
prevent the formation of ajoint or slow the process down.
2. Always select wire diameters to suit bothsoldering iron bit
and the parts/components tobe soldered.
3. Soldering irons systems should providesufficient heat to
satisfy the requirements of 1and 2 above.
4. Cored solder wires can be provided indifferent grades of
alloy so always ensure youhave selected the right grade for
theapplication.
5. Do not overheat as this causes an increase inthe depth of the
intermetallic layer, which inturn weakens the joint.
All materials from Cookson Electronics AssemblyMaterials are
manufactured to meet the moststringent of standards and to ensure
the bestpossible finish to every soldering application.
TECHNICAL SUPPORTFor technical assistance and support:North
Europe: Tel: +44 (0) 20 8665 6666 Central Europe: Tel: +32 (0) 14
44 50 00South Europe: Tel: +33 (0) 2 41 49 00 11
HEALTH & SAFETYObserve standard precautions for handling
anduse. Use in well ventilated areas. DO NOTSMOKE.
Alpha Fluitin 1532 wire is not considered toxic.However, its use
in typical soldering applicationswill generate a small amount of
decompositionand fumes. These fumes must be
adequatelyexhausted/vented for operator safety and comfort.
In order to carry out your full COSHH assessment,consult the
product Material Safety Data Sheet(MSDS).
-
ALPHA FLUITIN 1532NOCLEANCOREDSOLDER WIRE
Type: J-STD-004 – ROM1 / IPC-SF-818-M3CN / ISO 12224 – 1.1.2 /
DIN 8511-F-SW26
DESCRIPTION
Alpha Fluitin 1532 is an activated rosin cored solder wire
developed for general hand soldering applications. The unique
activatorsystem offers good thermal stability at pre-soldering
temperatures ensuring that Fluitin 1532 performs extremely well on
parts andsurfaces which present poor or difficult soldering
conditions.
Fluitin 1532 leaves post-soldering residues that are hard and
which can be safely left without the need to remove them. If the
removal ofresidues is required then semi-aqueous or aqueous systems
can be used effectively.
FEATURES & BENEFITS
ÿ Minimal, non-corrosive, clear and safe residues.
ÿ Very fast wetting.
ÿ Good spread characteristics.
ÿ Pleasant pine smell.
ÿ Ease of solderability.
ÿ Provides good joint appearance.
APPLICATION
Fluitin 1532 is suitable for use in any commercial no-clean hand
soldering application that specifies compliance to J-STD-004 –
ROM1standard.
It is suited to such areas of industry (subject to the above
criteria) as TV, Audio equipment, Video/DVD, Games box and all
types ofhousehold appliances.
HINTS & TIPS ON SOLDERING IN GENERAL
Always remember that a soldered joint is formed by heating the
parts to be soldered to a temperature in excess of the melting
point ofthe alloy to be used – in hand soldering this is how a
soldering iron is used. By feeding the cored wire onto the parts,
the flux is able toflow and remove oxide films, whilst the solder
creates a thin intermetallic bond which becomes the solder
joint.Note the following tips:
ÿ Use a soldering iron bit size and form to suit the operation:
small bits for soldering large components may prevent the formation
of ajoint or slow the process down.
ÿ Always select wire diameters to suit both soldering iron bit
and the parts/components to be soldered.
ÿ Soldering irons systems should provide sufficient heat to
satisfy the requirements of the points above.
ÿ Cored solder wires can be provided in different grades of
alloy so always ensure you have selected the right grade for
theapplication.
ÿ Do not overheat as this causes an increase in the depth of the
intermetallic layer, which in turn weakens the joint.
Issue 7
-
The information contained herein is based on data considered
accurate and is offered at no charge. No warranty is expressed or
implied regardingthe accuracy of this data. Liability is expressly
disclaimed for any loss or injury arising out of the use of this
information or the use of any materialsdesignated.
All materials from Cookson Electronics Assembly Material are
manufactured to meet the most stringent of standards and to
ensurethe best possible finish to every soldering application.
TECHNICAL SPECIFICATION
Physical
Properties
Typical Values Standard Alloy
Designation
Melting or
Solidus /
Liquidus
Temp °C
Flux
Configuration
Rosin Grade: WW per Fed Spec.LL-R-626
ISO 9453 (1)-Sn63Pb37
183 1.1% & 2.2%
RosinSoftening Point:
71°C (160°F) ISO 9453 (2)S-Sn60Pb40
183 - 190 1.1% & 2.2%
Acid Value: 170-190 (mg KOH/g) ISO 9453 (25)S-Sn60Pb38Cu2
183 - 190 1.1% & 2.2%
Halide Content: 0.80 – 1.10%(by weight)
ISO 9453 (30)S-SN62Pb36Ag2
178 - 190 2.2%
Corrosiveness: Classified toJ-STD-004 as M typematerial
LEAD FREESAC 305
LEAD FREE
217 2.2% & 3.3%
Copper Mirror: Classified toJ-STD-004 as 1E08 Ohms)
LEAD FREE SAC 405 217-219 2.2% & 3.3%
LEAD FREE Sn99Cu1 230-240 2.2% & 3.3%
Classification: J-STD-004 – ROM1IPC-SF-818 – M3CNISO 12224 –
1.1.2.Din 8511 – F – SW26
HEALTH & SAFETY
Observe standard precautions for handling and use. Use in well
ventilated areas. DO NOT SMOKE.Alpha Fluitin 1532 wire is not
considered toxic. However, its use in typical soldering
applications will generate a small amount ofdecomposition and
fumes.
These fumes must adequately exhausted/vented for operator safety
and comfort.
The information contained herein is based on data considered
accurate and is offered at no charge. No warranty is expressed or
implied regarding theaccuracy of this data. Liability is expressly
disclaimed for any loss or injury arising out of the use of this
information or the use of any materialsdesignated.
Issue 7
-
In order to carry out your full COSHH assessment, consult the
product Material Safety Data Sheet (MSDS).
--------------------------------------------------------------------------------------------------------------------------------------------------------------
European Headquarters: Worldwide Headquarters Regional
OfficesCookson Electronics Assembly Materials Cookson Electronics
Assembly Materials Belgium: Tel: +32 (0) 14 44 50 00Forsyth Road,
Sheerwater 600 Route 440 France: Tel: +33 (0) 2 41 49 00 11Woking,
Surrey Jersey City, New Jersey 07304 Germany: Tel: +49 (0) 2173
8490 300GU21 5RZ. United Kingdom USA Ireland: Tel: +353 (0) 1 842
1172Tel: +44 (0) 1483 793100 Tel: +1 (201) 434 6778 Italy: Tel: +39
(0) 2 38 33 11Fax: +44 (0) 1483 793101 Fax: + 1 (201) 434 7508
Hungary: Tel: +36 (0) 24 460 720
Netherlands: Tel: +31 (0) 35 695 5411
www.alphametals.com
The information contained herein is based on data considered
accurate and is offered at no charge. No warranty is expressed or
implied regarding theaccuracy of this data. Liability is expressly
disclaimed for any loss or injury arising out of the use of this
information or the use of any materialsdesignated.
Issue 7
-
The information contained herein is based on data considered
accurate and is offered at no charge. No warranty is expressed or
implied regarding the accuracy of this data. Liability is expressly
disclaimed for any loss or injury arising out of the use of this
information or the use of any materials designated. Page 1 of 9
Purpose The declaration below is intended for use as disclosure
of the substances contained in products supplied by Alpha, an Alent
plc company. This disclosure is provided for manufacturers of
Electrical and Electronic Equipment (EEE) and sub assemblies of EEE
and the End of Life Vehicles Directive.
Date February 5, 2015
Company Name ALPHA®, an Alent company
Product Name ALPHA Solder Wire Cored (SAC305) Alloy, Fluitin
1532 Flux
Alloys 96.5Sn / 3.0Ag / 0.5Cu
Product Total Mass (g) Not applicable – bulk material,
concentrations reported in ppm Materials and Substances The table
below references Level A and B Materials and Substances indicated
in the Joint Industry Guide – Material, JIG-101A Composition
Declaration Guide September 18th 2007 and the End of Life Vehicles
Directive 2000/53/EU and Global Automotive Declaration Substances
List (GADSL). This includes the materials defined in Article 4 .1
of the European Directive 2011/65/EU on the restriction of the use
of certain hazardous substances in electrical and electronic
equipment (RoHS Directive). It also includes references to the
European Chemicals Agency (ECHA), for the identification of
Substances of Very High Concern (SVHC) – the REACh Regulation as
defined in Article 57 of Regulation (EC) No. 1907/2006.
RoHS Substances
Material/Substance Threshold Level Material/Substance
Concentration
Cadmium/Cadmium Compounds 100ppm or Intentionally added Less
than Threshold Level and Not Intentionally Added
Hexavalent Chromium/ Hexavalent Chromium Compounds 1000ppm or
Intentionally added Less than Threshold Level and Not Intentionally
Added
Lead/Lead Compounds 1000ppm or Intentionally added Less than
Threshold Level and Not Intentionally Added
Mercury/Mercury Compounds 1000ppm or Intentionally added Less
than Threshold Level and Not Intentionally Added
Polybrominated Biphenyls (PBBs) 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
Polybrominated Biphenylethers (PBDEs) 1000ppm or Intentionally
added Less than Threshold Level and Not Intentionally Added
-
The information contained herein is based on data considered
accurate and is offered at no charge. No warranty is expressed or
implied regarding the accuracy of this data. Liability is expressly
disclaimed for any loss or injury arising out of the use of this
information or the use of any materials designated. Page 2 of 9
REACH SVHC Substances
# Substance Name CAS # Concentration Threshold (PPM) Material /
Substance Concentration
1 Anthracene 120-12-7 1000ppm or Intentionally added Less than
Threshold Level and Not Intentionally Added
2 4,4'- Diaminodiphenylmethane 101-77-9 1000ppm or Intentionally
added Less than Threshold Level and Not Intentionally Added
3 Dibutyl phthalate 84-74-2 1000ppm or Intentionally added Less
than Threshold Level and Not Intentionally Added
4 Cobalt dichloride 7646-79-9 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
5 Diarsenic pentaoxide 1303-28-2 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
6 Diarsenic trioxide 1327-53-3 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
7 Sodium dichromate, dihydrate 10588-01-9 1000ppm or
Intentionally added Less than Threshold Level and Not Intentionally
Added
8 5-tert-butyl-2,4,6-trinitro-m-xylene (musk xylene) 81-15-2
1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
9 Bis (2-ethyl(hexyl)phthalate) (DEHP) 117-81-7 1000ppm or
Intentionally added Less than Threshold Level and Not Intentionally
Added
10 Hexabromocyclododecane (HBCDD) 25637-99-4; 3194-55-6
1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
11 Alkanes, C10-13, chloro (Short Chain Chlorinated Paraffins)
85535-84-8 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
12 Bis(tributyltin) oxide,hexabutyldistannoxane 56-35-9 1000ppm
or Intentionally added Less than Threshold Level and Not
Intentionally Added
13 Lead hydrogen arsenate 7784-40-9 1000ppm or Intentionally
added Less than Threshold Level and Not Intentionally Added
14 Triethyl arsenate 15606-95-8 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
15 Benzyl butyl phthalate 85-68-7 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
16 2,4-Dinitrotoluene 121-14-2 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
17 Anthracene oil 90640-80-5 1000ppm or Intentionally added Less
than Threshold Level and Not Intentionally Added
18 Anthracene oil, anthracene paste 90640-81-6 1000ppm or
Intentionally added Less than Threshold Level and Not Intentionally
Added
19 Anthracene oil, anthracene paste, anthracene fraction
91995-15-2 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
20 Anthracene oil, anthracene paste,distn. lights 91995-17-4
1000ppm or Intentionally added Less than Threshold Level and Not
Intentionally Added
21 Anthracene oil, anthracene-low 90640-82-7 1000ppm or
Intentionally added Less than Threshold Level and Not Intentionally
Added
22 Diisobutyl phthalate 84-69-5 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
23 Lead chromate 7758-97-6 1000ppm or Intentionally added Less
than Threshold Level and Not Intentionally Added
24 Lead chromate molybdate sulphate red (C.I. Pigment Red 104)
12656-85-8 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
25 Lead sulfochromate yellow (C.I. Pigment Yellow 34) 1344-37-2
1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
-
The information contained herein is based on data considered
accurate and is offered at no charge. No warranty is expressed or
implied regarding the accuracy of this data. Liability is expressly
disclaimed for any loss or injury arising out of the use of this
information or the use of any materials designated. Page 3 of 9
# Substance Name CAS # Concentration Threshold (PPM) Material /
Substance Concentration
26 Pitch, coal tar, high temp. 65996-93-2 1000ppm or
Intentionally added Less than Threshold Level and Not Intentionally
Added
27 Tris(2-chloroethyl)phosphate 115-96-8 1000ppm or
Intentionally added Less than Threshold Level and Not Intentionally
Added
28 Acrylamide 79-06-1 1000ppm or Intentionally added Less than
Threshold Level and Not Intentionally Added
29 Trichloroethylene 79-01-6 1000ppm or Intentionally added Less
than Threshold Level and Not Intentionally Added
30 Boric acid 10043-35-3 1000ppm or Intentionally added Less
than Threshold Level and Not Intentionally Added
31 Disodium tetraborate, anhydrous 1330-43-4 1000ppm or
Intentionally added Less than Threshold Level and Not Intentionally
Added
32 Tetraboron disodium heptaoxide, hydrate 12267-73-1 1000ppm or
Intentionally added Less than Threshold Level and Not Intentionally
Added
33 Sodium chromate 7775-11-3 1000ppm or Intentionally added Less
than Threshold Level and Not Intentionally Added
34 Potassium chromate 7789-00-6 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
35 Ammonium dichromate 7789-09-5 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
36 Potassium dichromate 7778-50-9 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
37 2-Ethoxyethanol 110-80-5 1000ppm or Intentionally added Less
than Threshold Level and Not Intentionally Added
38 2-Methoxyethanol 109-86-4 1000ppm or Intentionally added Less
than Threshold Level and Not Intentionally Added
39 Chromic acid 7738-94-5 1000ppm or Intentionally added Less
than Threshold Level and Not Intentionally Added
40 Chromium trioxide 1333-82-0 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
41 Cobalt(II) carbonate 513-79-1 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
42 Cobalt(II) diacetate 71-48-7 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
43 Cobalt(II) dinitrate 10141-05-6 1000ppm or Intentionally
added Less than Threshold Level and Not Intentionally Added
44 Cobalt(II) sulphate 10124-43-3 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
45 1,2,3-Trichloropropane 96-18-4 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
46 1,2-Benzenedicarboxylic acid, di-C6-8-branched alkyl esters,
C7-rich 71888-89-6 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
47 1,2-Benzenedicarboxylic acid, di-C7-11-branched and linear
alkyl esters 68515-42-4 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
48 1-Methyl-2-pyrrolidone 872-50-4 1000ppm or Intentionally
added Less than Threshold Level and Not Intentionally Added
49 2-Ethoxyethyl acetate 111-15-9 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
50 Hydrazine 302-01-2 / 7803-57-8 1000ppm or Intentionally
added
Less than Threshold Level and Not Intentionally Added
51 Strontium chromate 7789-06-2 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
52 Dichromium tris(chromate) 24613-89-6 1000ppm or Intentionally
added
Less than Threshold Level and Not Intentionally Added
-
The information contained herein is based on data considered
accurate and is offered at no charge. No warranty is expressed or
implied regarding the accuracy of this data. Liability is expressly
disclaimed for any loss or injury arising out of the use of this
information or the use of any materials designated. Page 4 of 9
# Substance Name CAS # Concentration Threshold (PPM) Material /
Substance Concentration
53 Potassium hydroxyoctaoxodizincatedi-chromate 11103-86-9
1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
54 Pentazinc chromate octahydroxide 49663-84-5 1000ppm or
Intentionally added Less than Threshold Level and Not Intentionally
Added
55 Aluminosilicate Refractory Ceramic Fibres (RCF) - 1000ppm or
Intentionally added
Less than Threshold Level and Not Intentionally Added
56 Zirconia Aluminosilicate Refractory Ceramic Fibres (Zr-RCF) -
1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
57 Formaldehyde, oligomeric reaction products with aniline
(technical MDA) 25214-70-4 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
58 Bis(2-methoxyethyl) phthalate 117-82-8 1000ppm or
Intentionally added Less than Threshold Level and Not Intentionally
Added
59 2-Methoxyaniline; o-Anisidine 90-04-0 1000ppm or
Intentionally added Less than Threshold Level and Not Intentionally
Added
60 4-(1,1,3,3-tetramethylbutyl)phenol, (4-tert-Octylphenol)
140-66-9 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
61 1,2-Dichloroethane 107-06-2 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
62 Bis(2-methoxyethyl) ether 111-96-6 1000ppm or Intentionally
added Less than Threshold Level and Not Intentionally Added
63 Arsenic acid 7778-39-4 1000ppm or Intentionally added Less
than Threshold Level and Not Intentionally Added
64 Calcium arsenate 7778-44-1 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
65 Trilead diarsenate 3687-31-8 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
66 N,N-dimethylacetamide (DMAC) 127-19-5 1000ppm or
Intentionally added Less than Threshold Level and Not Intentionally
Added
67 2,2'-dichloro-4,4'-methylenedianiline (MOCA) 101-14-4 1000ppm
or Intentionally added Less than Threshold Level and Not
Intentionally Added
68 Phenolphthalein 77-09-8 1000ppm or Intentionally added Less
than Threshold Level and Not Intentionally Added
69 Lead azide Lead diazide 13424-46-9 1000ppm or Intentionally
added Less than Threshold Level and Not Intentionally Added
70 Lead styphnate 15245-44-0 1000ppm or Intentionally added Less
than Threshold Level and Not Intentionally Added
71 Lead dipicrate 6477-64-1 1000ppm or Intentionally added Less
than Threshold Level and Not Intentionally Added
72
α,α.Bis[4.(dimethylamino)phenyl].4
(phenylamino)naphthalene.1.methanol (C.I.
Solvent Blue 4) [with ≥ 0.1% of Michler's ketone (EC No.
202.027.5) or Michler's base
(EC No. 202.959.2)]
6786-83-0
1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
73 N,N,N',N'.tetramethyl.4,4'.methylenedianiline (Michler’s
base) 101-61-1 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
74 1,3,5.tris[(2S and
2R).2,3.epoxypropyl].1,3,5.triazine.2,4,6.(1H,3H,5H).trione
(β.TGIC)
59653-74-6 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
75 Diboron trioxide 1303-86-2 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
76 1,2.bis(2.methoxyethoxy)ethane (TEGDME; triglyme) 112-49-2
1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
-
The information contained herein is based on data considered
accurate and is offered at no charge. No warranty is expressed or
implied regarding the accuracy of this data. Liability is expressly
disclaimed for any loss or injury arising out of the use of this
information or the use of any materials designated. Page 5 of 9
# Substance Name CAS # Concentration Threshold (PPM) Material /
Substance Concentration
77
4,4'.bis(dimethylamino).4''.(methylamino)trityl alcohol [with ≥
0.1% of Michler's ketone (EC
No. 202.027.5) or Michler's base (EC No. 202.959.2)]
561-41-1
1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
78 Lead(II) bis(methanesulfonate) 17570-76-2 1000ppm or
Intentionally added Less than Threshold Level and Not Intentionally
Added
79 Formamide 75-12-7 1000ppm or Intentionally added Less than
Threshold Level and Not Intentionally Added
80
[4.[4,4'.bis(dimethylamino)
benzhydrylidene]cyclohexa.2,5.dien.1.ylidene
]dimethylammonium chloride (C.I. Basic Violet 3) [with ≥ 0.1% of
Michler's ketone (EC
No. 202.027.5) or Michler's base (EC No. 202.959.2)]
548-62-9
1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
81 1,2.dimethoxyethane; ethylene glycol dimethyl ether (EGDME)
110-71-4 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
82
[4.[[4.anilino.1.naphthyl][4.(dimethylamino)phenyl]methylene]cyclohexa.2,5.dien.1.ylidene]
dimethylammonium chloride (C.I. Basic Blue 26) [with ≥ 0.1% of
Michler's ketone (EC No.
202.027.5) or Michler's base (EC No. 202.959.2)]
2580-56-5
1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
83 1,3,5.Tris(oxiran.2.ylmethyl).1,3,5.triazinane.2,4,6.trione
(TGIC) 2451-62-9 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
84 4,4'.bis(dimethylamino)benzophenone (Michler’s ketone)
90-94-8 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
85 Pyrochlore, antimony lead yellow 8012-00-8 1000ppm or
Intentionally added Less than Threshold Level and Not Intentionally
Added
86 6-methoxy-m-toluidine (p-cresidine) 120-71-8 1000ppm or
Intentionally added Less than Threshold Level and Not Intentionally
Added
87 Henicosafluoroundecanoic acid 2058-94-8 1000ppm or
Intentionally added Less than Threshold Level and Not Intentionally
Added
88
Hexahydromethylphthalic anhydride [1],
Hexahydro-4-methylphthalic anhydride [2],
Hexahydro-1-methylphthalic anhydride [3],
Hexahydro-3-methylphthalic anhydride [4]
[The individual isomers [2], [3] and [4] (and all possible
combinations of the isomers [1] are
covered by this entry]
25550-51-0, 19438-60-9, 48122-14-1, 57110-29-9
1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
89
Cyclohexane-1,2-dicarboxylic anhydride [1],
cis-cyclohexane-1,2-dicarboxylic anhydride
[2], trans-cyclohexane-1,2-dicarboxylic anhydride [3] [The
individual cis- [2] and
trans- [3] isomer
85-42-7, 13149-00-3, 14166-21-3
1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
90 Dibutyltin dichloride (DBTC) 683-18-1 1000ppm or
Intentionally added Less than Threshold Level and Not Intentionally
Added
91 Lead bis(tetrafluoroborate) 13814-96-5 1000ppm or
Intentionally added Less than Threshold Level and Not Intentionally
Added
92 Lead dinitrate 10099-74-8 1000ppm or Intentionally added Less
than Threshold Level and Not Intentionally Added
93 Silicic acid, lead salt 11120-22-2 1000ppm or Intentionally
added Less than Threshold Level and Not Intentionally Added
94 4-Aminoazobenzene 60-09-3 1000ppm or Intentionally added Less
than Threshold Level and Not Intentionally Added
-
The information contained herein is based on data considered
accurate and is offered at no charge. No warranty is expressed or
implied regarding the accuracy of this data. Liability is expressly
disclaimed for any loss or injury arising out of the use of this
information or the use of any materials designated. Page 6 of 9
# Substance Name CAS # Concentration Threshold (PPM) Material /
Substance Concentration
95 Lead titanium zirconium oxide 12626-81-2 1000ppm or
Intentionally added Less than Threshold Level and Not Intentionally
Added
96 Lead monoxide (lead oxide) 1317-36-8 1000ppm or Intentionally
added Less than Threshold Level and Not Intentionally Added
97 o-Toluidine 95-53-4 1000ppm or Intentionally added Less than
Threshold Level and Not Intentionally Added
98 3-ethyl-2-methyl-2-(3-methylbutyl)-1,3-oxazolidine
143860-04-2 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
99 Silicic acid (H2Si2O5), barium salt (1:1), lead-
doped
68784-75-8 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
100 Trilead bis(carbonate)dihydroxide 1319-46-6 1000ppm or
Intentionally added Less than Threshold Level and Not Intentionally
Added
101 Furan 110-00-9 1000ppm or Intentionally added Less than
Threshold Level and Not Intentionally Added
102 N,N-dimethylformamide 68-12-2 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
103
4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated [covering
well-defined substances
and UVCB substances, polymers and homologues]
-
1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
104
4-Nonylphenol, branched and linear [substances with a linear
and/or branched
alkyl chain with a carbon number of 9 covalently bound in
position 4 to phenol,
covering also UVCB- and well-defined substances which include
any of the individual
isomers or a combination thereof]
-
1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
105 4,4'-methylenedi-o-toluidine 838-88-0 1000ppm or
Intentionally added Less than Threshold Level and Not Intentionally
Added
106 Diethyl sulphate 64-67-5 1000ppm or Intentionally added Less
than Threshold Level and Not Intentionally Added
107 Dimethyl sulphate 77-78-1 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
108 Lead oxide sulfate 12036-76-9 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
109 Lead titanium trioxide 12060-00-3 1000ppm or Intentionally
added Less than Threshold Level and Not Intentionally Added
110 Acetic acid, lead salt, basic 51404-69-4 1000ppm or
Intentionally added Less than Threshold Level and Not Intentionally
Added
111 [Phthalato(2-)]dioxotrilead 69011-06-9 1000ppm or
Intentionally added Less than Threshold Level and Not Intentionally
Added
112 Bis(pentabromophenyl) ether (decabromodiphenyl ether;
DecaBDE) 1163-19-5 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
113 N-methylacetamide 79-16-3 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
114 Dinoseb (6-sec-butyl-2,4-dinitrophenol) 88-85-7 1000ppm or
Intentionally added Less than Threshold Level and Not Intentionally
Added
115 1,2-Diethoxyethane 629-14-1 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
116 Tetralead trioxide sulphate 12202-17-4 1000ppm or
Intentionally added
Less than Threshold Level and Not Intentionally Added
-
The information contained herein is based on data considered
accurate and is offered at no charge. No warranty is expressed or
implied regarding the accuracy of this data. Liability is expressly
disclaimed for any loss or injury arising out of the use of this
information or the use of any materials designated. Page 7 of 9
# Substance Name CAS # Concentration Threshold (PPM) Material /
Substance Concentration
117 N-pentyl-isopentylphthalate 776297-69-9 1000ppm or
Intentionally added Less than Threshold Level and Not Intentionally
Added
118 Dioxobis(stearato)trilead 12578-12-0 1000ppm or
Intentionally added Less than Threshold Level and Not Intentionally
Added
119 Tetraethyllead 78-00-2 1000ppm or Intentionally added Less
than Threshold Level and Not Intentionally Added
120 Pentalead tetraoxide sulphate 12065-90-6 1000ppm or
Intentionally added Less than Threshold Level and Not Intentionally
Added
121 Pentacosafluorotridecanoic acid 72629-94-8 1000ppm or
Intentionally added Less than Threshold Level and Not Intentionally
Added
122 Tricosafluorododecanoic acid 307-55-1 1000ppm or
Intentionally added Less than Threshold Level and Not Intentionally
Added
123 Heptacosafluorotetradecanoic acid 376-06-7 1000ppm or
Intentionally added Less than Threshold Level and Not Intentionally
Added
124 1-bromopropane (n-propyl bromide) 106-94-5 1000ppm or
Intentionally added Less than Threshold Level and Not Intentionally
Added
125 Methoxyacetic acid 625-45-6 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
126 4-methyl-m-phenylenediamine (toluene-2,4-diamine) 95-80-7
1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
127 Methyloxirane (Propylene oxide) 75-56-9 1000ppm or
Intentionally added Less than Threshold Level and Not Intentionally
Added
128 Trilead dioxide phosphonate 12141-20-7 1000ppm or
Intentionally added Less than Threshold Level and Not Intentionally
Added
129 o-aminoazotoluene 97-56-3 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
130 1,2-Benzenedicarboxylic acid, dipentylester, branched and
linear 84777-06-0 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
131 4,4'-oxydianiline and its salts 101-80-4 1000ppm or
Intentionally added Less than Threshold Level and Not Intentionally
Added
132 Orange lead (lead tetroxide) 1314-41-6 1000ppm or
Intentionally added Less than Threshold Level and Not Intentionally
Added
133 Biphenyl-4-ylamine 92-67-1 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
134 Diisopentylphthalate 605-50-5 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
135 Fatty acids, C16-18, lead salts 91031-62-8 1000ppm or
Intentionally added Less than Threshold Level and Not Intentionally
Added
136 Diazene-1,2-dicarboxamide (C,C'-azodi(formamide)) 123-77-3
1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
137 Sulfurous acid, lead salt, dibasic 62229-08-7 1000ppm or
Intentionally added Less than Threshold Level and Not Intentionally
Added
138 Lead cyanamidate 20837-86-9 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
139 Cadmium 7440-43-9 1000ppm or Intentionally added Less than
Threshold Level and Not Intentionally Added
140 Cadmium Oxide 1306-19-0 1000ppm or Intentionally added Less
than Threshold Level and Not Intentionally Added
141 Ammonium pentadecafluorooctanoate (APFO) 3825-26-1 1000ppm
or Intentionally added
Less than Threshold Level and Not Intentionally Added
142 Pentadecafluorooctanoic acid (PFOA) 335-67-1 1000ppm or
Intentionally added Less than Threshold Level and Not Intentionally
Added
143 Dipentyl phthalate (DPP) 131-18-0 1000ppm or Intentionally
added
Less than Threshold Level and Not Intentionally Added
-
The information contained herein is based on data considered
accurate and is offered at no charge. No warranty is expressed or
implied regarding the accuracy of this data. Liability is expressly
disclaimed for any loss or injury arising out of the use of this
information or the use of any materials designated. Page 8 of 9
# Substance Name CAS # Concentration Threshold (PPM) Material /
Substance Concentration
144
4-Nonylphenol, branched and linear, ethoxylated
[substances with a linear and/or branched alkyl chain with a
carbon number of 9
covalently bound in position 4 to phenol, ethoxylated covering
UVCB- and well-defined substances, polymers and homologues, which
include any of the individual isomers and/or
combinations thereof]
-
1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
145 Cadmium sulphide 1306-23-6 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
146
Disodium
4-amino-3-[[4'-[(2,4-diaminophenyl)azo][1,1'-biphenyl]-4-yl]azo]
-
5-hydroxy-6-(phenylazo)naphthalene-2,7-disulphonate (C.I. Direct
Black 38)
1937-37-7
1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
147 Dihexyl phthalate 84-75-3 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
148 Imidazolidine-2-thione; (2-imidazoline-2-thiol) 96-45-7
1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
149 Trixylyl phosphate 25155-23-1 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
150 Disodium 3,3'-[[1,1'-biphenyl]-4,4'-
diylbis(azo)]bis(4-aminonaphthalene-1-sulphonate) (C.I. Direct
Red 28)
573-58-0 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
151 Lead di(acetate) 301-04-2 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
152 1,2-Benzenedicarboxylic acid, dihexyl ester, branched and
linear 68515-50-4 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
153 Sodium perborate; perboric acid, sodium salt - 1000ppm or
Intentionally added Less than Threshold Level and Not Intentionally
Added
154 Sodium peroxometaborate 7632-04-4 1000ppm or Intentionally
added Less than Threshold Level and Not Intentionally Added
155 Cadmium chloride 10108-64-2 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
156 2-(2H-benzotriazol-2-yl)-4,6-ditertpentylphenol (UV-328)
25973-55-1 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
157 2-benzotriazol-2-yl-4,6-di-tert-butylphenol (UV-320)
3846-71-7 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
158 2-ethylhexyl
10-ethyl-4,4-dioctyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate
(DOTE) 15571-58-1 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
159 Cadmium fluoride 7790-79-6 1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
160 Cadmium sulphate 10124-36-4; 31119-53-6 1000ppm or
Intentionally added
Less than Threshold Level and Not Intentionally Added
161
Reaction mass of 2-ethylhexyl
10-ethyl-4,4-dioctyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate
and 2-ethylhexyl
10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-octyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate
(reaction mass of DOTE and MOTE)
-
1000ppm or Intentionally added
Less than Threshold Level and Not Intentionally Added
-
The information contained herein is based on data considered
accurate and is offered at no charge. No warranty is expressed or
implied regarding the accuracy of this data. Liability is expressly
disclaimed for any loss or injury arising out of the use of this
information or the use of any materials designated. Page 9 of 9
Other Regulated Substances of Concern
Material/Substance Threshold Level Material/Substance
Concentration
Asbestos Intentionally added Not Intentionally Added Azo
colorants Intentionally added Not Intentionally Added Brominated
Flame Retardants (other than PBB or PBDE’s) 1000ppm Less than
threshold level DecaBDE, Decabromodiphenylether, 1163-19-5 1000ppm
or Intentionally added Not Intentionally Added Halogen - Bromine
(Br), CAS No. 007726-95-6 1000ppm Less than Threshold Level Halogen
- Chlorine (Cl), CAS No. 007782-50-5 1000ppm Less than Threshold
Level Halogens Total (Br & Cl) 1500ppm Less than Threshold
Level Ozone Depleting Substances (CFCs, HCFCs, HBFCs, carbon
tetrachloride etc.)
Class I : Intentionally added Class II : HCFCs : 1000ppm
Less than Threshold Level and Not Intentionally Added
Phthalates 1000ppm Less than Threshold Level Polychlorinated
Biphenyls (PCBs) Intentionally added Not Intentionally Added
Polychlorinated Napthalenes (more than three chlorine atoms)
Intentionally added Not Intentionally Added
PFOS & PFOA ( perfluorooctane sulfonate &
perfluorooctanoic acid)
1000ppm or Intentionally added Not Intentionally Added
Radioactive Substances Intentionally added Not Intentionally
Added Shortchain Chlorinated Paraffins Intentionally added Not
Intentionally Added Tributyl Tin (TBT) and Triphenyl Tin (TPT)
Intentionally added Not Intentionally Added Tributyl Tin Oxide
(TBTO) Intentionally added Not Intentionally Added Vinyl Chloride
Polymer (PVC) 1000ppm Less than Threshold Level Antimony/Antimony
Compounds 1000ppm Less than Threshold Level Arsenic/Arsenic
Compounds 1000ppm Less than Threshold Level Beryllium/Beryllium
Compounds 1000ppm Less than Threshold Level Bismuth/Bismuth
Compounds 1000ppm Less than Threshold Level Copper/Copper Compounds
1000ppm 5,000 ppm nominal Gold/Gold Compounds 1000ppm Less than
threshold level Magnesium 1000ppm Less than Threshold Level
Nickel/Nickel Compounds 1000ppm Less than threshold level
Palladium/Palladium Compounds 1000ppm Less than Threshold Level
Selenium/Selenium Compounds 1000ppm Less than Threshold Level
Silver/Silver Compounds 1000ppm 30,000 ppm nominal
Source data used for Declaration:
Third-party Analysis GLB-RoHS-SM-019
√ Subject Matter Expert Assessment Revision 3: Date: February 5,
2015