HUAWEI TECHNOLOGIES CO., LTD. www.huawei.com Huawei Confidential Technical Explanation For HUAWEI Dual-mode BTS Evolution
Dec 03, 2014
英文标题 :40-47pt
副标题 :26-30pt
字体颜色 : 反白内部使用字体 :
FrutigerNext LT Medium
外部使用字体 : Arial
中文标题 :35-47pt
字体 : 黑体 副标题 :24-28pt
字体颜色 : 反白字体 : 细黑体
HUAWEI TECHNOLOGIES CO., LTD.
www.huawei.com
Huawei Confidential
Technical Explanation For HUAWEI Dual-mode BTS Evolution
英文标题 :32-35pt
颜色 : R153 G0 B0
内部使用字体 :
FrutigerNext LT Medium
外部使用字体 : Arial
中文标题 :30-32pt
颜色 : R153 G0 B0
字体 : 黑体
英文正文 :20-22pt
子目录 (2-5 级 ) :18pt
颜色 : 黑色内部使用字体 :
FrutigerNext LT Regular
外部使用字体 : Arial
中文正文 :18-20pt
子目录 (2-5 级 ):18pt
颜色 : 黑色字体 : 细黑体
Contents
Dual-mode BTS Evolve Scenarios
What We Need to Do for BTS Mode
Evolution
英文标题 :32-35pt
颜色 : R153 G0 B0
内部使用字体 :
FrutigerNext LT Medium
外部使用字体 : Arial
中文标题 :30-32pt
颜色 : R153 G0 B0
字体 : 黑体
英文正文 :20-22pt
子目录 (2-5 级 ) :18pt
颜色 : 黑色内部使用字体 :
FrutigerNext LT Regular
外部使用字体 : Arial
中文正文 :18-20pt
子目录 (2-5 级 ):18pt
颜色 : 黑色字体 : 细黑体
Add hardware
GSM/UMTS Evolution
G
GG
G
G+U
G+U
G+U G
U
G+U
G+UG+U
RF evo
lutio
n by
SDR
G/U will co-exist for a long time
U
U
U U
Move GTMU
Add hardware
英文标题 :32-35pt
颜色 : R153 G0 B0
内部使用字体 :
FrutigerNext LT Medium
外部使用字体 : Arial
中文标题 :30-32pt
颜色 : R153 G0 B0
字体 : 黑体
英文正文 :20-22pt
子目录 (2-5 级 ) :18pt
颜色 : 黑色内部使用字体 :
FrutigerNext LT Regular
外部使用字体 : Arial
中文正文 :18-20pt
子目录 (2-5 级 ):18pt
颜色 : 黑色字体 : 细黑体
Contents
Dual-mode BTS Evolve Scenarios
What We Need to Do for BTS Mode
Evolution
英文标题 :32-35pt
颜色 : R153 G0 B0
内部使用字体 :
FrutigerNext LT Medium
外部使用字体 : Arial
中文标题 :30-32pt
颜色 : R153 G0 B0
字体 : 黑体
英文正文 :20-22pt
子目录 (2-5 级 ) :18pt
颜色 : 黑色内部使用字体 :
FrutigerNext LT Regular
外部使用字体 : Arial
中文正文 :18-20pt
子目录 (2-5 级 ):18pt
颜色 : 黑色字体 : 细黑体
BTS - Smooth Evolution
Common platform of G/U/L for smooth migration Hardware sharing for GSM/UMTS/LTE by SDR to save the investment One MRRU/MRFU supports 6 GSM, or 4 UMTS carriers BBU shared by any RF
GSM
GSM
GS M
GS M
GS M
GS M
U M TS
UMTS
UMTS
GSM GSM + UMTS
Different RF
Co-Cabinet
Add UMTS card
in BBU
Different RF
Co-Cabinet
Add LTE card
in BBU
GSM + UMTS+LTE
LTE
LTE
LTE
Co-Cabinet
GS M
GS M
GS M
U M TS
UMTS
UMTS
Future version Evolution
GSM
GSM+UMTS
2G
3G2G
UMTS
RRU3908 MRFU
SDR
SDR: Software-defined radio
3G3G
BBU3900
BBU F
A
N WBBP
WBBP
GMPT
WMPT
PWR
PWR
英文标题 :32-35pt
颜色 : R153 G0 B0
内部使用字体 :
FrutigerNext LT Medium
外部使用字体 : Arial
中文标题 :30-32pt
颜色 : R153 G0 B0
字体 : 黑体
英文正文 :20-22pt
子目录 (2-5 级 ) :18pt
颜色 : 黑色内部使用字体 :
FrutigerNext LT Regular
外部使用字体 : Arial
中文正文 :18-20pt
子目录 (2-5 级 ):18pt
颜色 : 黑色字体 : 细黑体
Typical configuration for GSM only
GTMU
FAN
PWR
PWR
RRU3908 RRU3908 RRU3908
The GTMU includes the function of main control, transmission, clock and interfacing three CPRIs to three RRU3908.
The GTMU includes the function of main control, transmission, clock and interfacing three CPRIs to three RRU3908.
GO GOGO
英文标题 :32-35pt
颜色 : R153 G0 B0
内部使用字体 :
FrutigerNext LT Medium
外部使用字体 : Arial
中文标题 :30-32pt
颜色 : R153 G0 B0
字体 : 黑体
英文正文 :20-22pt
子目录 (2-5 级 ) :18pt
颜色 : 黑色内部使用字体 :
FrutigerNext LT Regular
外部使用字体 : Arial
中文正文 :18-20pt
子目录 (2-5 级 ):18pt
颜色 : 黑色字体 : 细黑体
Appearance of the BBU3900
GTMUGSM Transmission & Timing & Management Unit for BBUConfiguration quantity: 0 or 1, mandatory in GX mode.WMPTWCDMA Main Processing & Timing unit Configuration quantity: 0 to 2, mandatory in UX mode.WBBPWCDMA Baseband Processing unitConfiguration quantity: 0 to 4, mandatory in UX mode.
GTMUGSM Transmission & Timing & Management Unit for BBUConfiguration quantity: 0 or 1, mandatory in GX mode.WMPTWCDMA Main Processing & Timing unit Configuration quantity: 0 to 2, mandatory in UX mode.WBBPWCDMA Baseband Processing unitConfiguration quantity: 0 to 4, mandatory in UX mode.
英文标题 :32-35pt
颜色 : R153 G0 B0
内部使用字体 :
FrutigerNext LT Medium
外部使用字体 : Arial
中文标题 :30-32pt
颜色 : R153 G0 B0
字体 : 黑体
英文正文 :20-22pt
子目录 (2-5 级 ) :18pt
颜色 : 黑色内部使用字体 :
FrutigerNext LT Regular
外部使用字体 : Arial
中文正文 :18-20pt
子目录 (2-5 级 ):18pt
颜色 : 黑色字体 : 细黑体
Appearance of the RRU3908
Mode Total Number of Carriers
Number of GSM Carriers of PA1
Number of UMTS Carriers of PA2
Power per GSM Carrier (Power not Shared) (W)
Power per GSM Carrier (Power Shared) (W)
Power per UMTS Carrier (W)
GxUy 2 1 1 20 20 40
3 2 1 15 15 30
4 3 1 10 12 30
3 1 2 20 20 20
4 2 2 10 10 20
5 3 2 10 12 15
英文标题 :32-35pt
颜色 : R153 G0 B0
内部使用字体 :
FrutigerNext LT Medium
外部使用字体 : Arial
中文标题 :30-32pt
颜色 : R153 G0 B0
字体 : 黑体
英文正文 :20-22pt
子目录 (2-5 级 ) :18pt
颜色 : 黑色内部使用字体 :
FrutigerNext LT Regular
外部使用字体 : Arial
中文正文 :18-20pt
子目录 (2-5 级 ):18pt
颜色 : 黑色字体 : 细黑体
Hardware change:• WMPT and WBBP are needed to be added to meet the typical 2G/3G application.
• CPRI cables are necessary to connect between GTMU and WBBP.
Iub and Abis Transmission :
Interface Iub can share the Abis transmission resource. When the primary Abis transmission resource is not
enough, additional transmission resource can be added either on GTMU or WMPT.
Hardware change:• WMPT and WBBP are needed to be added to meet the typical 2G/3G application.
• CPRI cables are necessary to connect between GTMU and WBBP.
Iub and Abis Transmission :
Interface Iub can share the Abis transmission resource. When the primary Abis transmission resource is not
enough, additional transmission resource can be added either on GTMU or WMPT.
GSM Only Evolve to GU Dual Mode
GO GOGO
GTMU
FAN
PWR
PWR
RRU3908 RRU3908 RRU3908Abis
CPRI
GTMU
FAN
PWR
PWR
RRU3908 RRU3908 RRU3908Abis
WBBP WMPT
+ Iub
GU GU GU
CPRI
GSM ONLY
GSM&UMTS
英文标题 :32-35pt
颜色 : R153 G0 B0
内部使用字体 :
FrutigerNext LT Medium
外部使用字体 : Arial
中文标题 :30-32pt
颜色 : R153 G0 B0
字体 : 黑体
英文正文 :20-22pt
子目录 (2-5 级 ) :18pt
颜色 : 黑色内部使用字体 :
FrutigerNext LT Regular
外部使用字体 : Arial
中文正文 :18-20pt
子目录 (2-5 级 ):18pt
颜色 : 黑色字体 : 细黑体
Software change and configuration:• The data of NodeB and relative logical target in RNC should be configured.
• RRU’s work mode should be GSM&UMTS in NodeB.
• The switch of SFP interface on GTMU should be configured consistent with hardware connection.
• The work mode of RRU should be changed into GSM&UMTS in BSC maintenance terminal.
• The UMTS software include WMPT,WBBP,RRU3908 should be downloaded and activated via
NodeB maintenance terminal.
Influence:• In the whole procedure, GTMU will not restart.
• RRU3908 will restart automatically when the UMTS software of RRU has been activated. At this
time, the GSM cell on the same RRU will be influenced until the RRU runs normally.
Software change and configuration:• The data of NodeB and relative logical target in RNC should be configured.
• RRU’s work mode should be GSM&UMTS in NodeB.
• The switch of SFP interface on GTMU should be configured consistent with hardware connection.
• The work mode of RRU should be changed into GSM&UMTS in BSC maintenance terminal.
• The UMTS software include WMPT,WBBP,RRU3908 should be downloaded and activated via
NodeB maintenance terminal.
Influence:• In the whole procedure, GTMU will not restart.
• RRU3908 will restart automatically when the UMTS software of RRU has been activated. At this
time, the GSM cell on the same RRU will be influenced until the RRU runs normally.
GSM Only Evolve to GU Dual Mode
英文标题 :32-35pt
颜色 : R153 G0 B0
内部使用字体 :
FrutigerNext LT Medium
外部使用字体 : Arial
中文标题 :30-32pt
颜色 : R153 G0 B0
字体 : 黑体
英文正文 :20-22pt
子目录 (2-5 级 ) :18pt
颜色 : 黑色内部使用字体 :
FrutigerNext LT Regular
外部使用字体 : Arial
中文正文 :18-20pt
子目录 (2-5 级 ):18pt
颜色 : 黑色字体 : 细黑体
Change the Working Mode of MBSC
英文标题 :32-35pt
颜色 : R153 G0 B0
内部使用字体 :
FrutigerNext LT Medium
外部使用字体 : Arial
中文标题 :30-32pt
颜色 : R153 G0 B0
字体 : 黑体
英文正文 :20-22pt
子目录 (2-5 级 ) :18pt
颜色 : 黑色内部使用字体 :
FrutigerNext LT Regular
外部使用字体 : Arial
中文正文 :18-20pt
子目录 (2-5 级 ):18pt
颜色 : 黑色字体 : 细黑体
Networking Application Between the BBU3900 and RRU3908/MRFU
The networking modes between the BBU3900 and
RRU3908/MRFU include the convergence
connection on the CPRI panel and two-star
connection. The MRFU supports only the two-star
connection. For a new site, the two-star
connection is first selected for the RRU3908. For
the expansion and upgrade, the convergence
connection on the CPRI panel can be selected as
required.
英文标题 :32-35pt
颜色 : R153 G0 B0
内部使用字体 :
FrutigerNext LT Medium
外部使用字体 : Arial
中文标题 :30-32pt
颜色 : R153 G0 B0
字体 : 黑体
英文正文 :20-22pt
子目录 (2-5 级 ) :18pt
颜色 : 黑色内部使用字体 :
FrutigerNext LT Regular
外部使用字体 : Arial
中文正文 :18-20pt
子目录 (2-5 级 ):18pt
颜色 : 黑色字体 : 细黑体
Convergence connection on the CPRI panel
If the RRU/RFU in GSM only or UMTS only mode is used,
the CPRI interface can be from the GTMU or WBBP.
WBBP
WBBP
UFAN
UPEUWBBP
WBBP
WMPT
GTMU
RF module
RF module
RF module
GU
BBUCPRI Optical
英文标题 :32-35pt
颜色 : R153 G0 B0
内部使用字体 :
FrutigerNext LT Medium
外部使用字体 : Arial
中文标题 :30-32pt
颜色 : R153 G0 B0
字体 : 黑体
英文正文 :20-22pt
子目录 (2-5 级 ) :18pt
颜色 : 黑色内部使用字体 :
FrutigerNext LT Regular
外部使用字体 : Arial
中文正文 :18-20pt
子目录 (2-5 级 ):18pt
颜色 : 黑色字体 : 细黑体
Two-star connection in GU mode
2G and 3G data can be transmitted on their own CPRI optical cables to implement decoupling. In this way, 2G and 3G equipment can coexist.
WBBP
WBBP
UFAN
UPEUWBBP
WBBP
WMPT
GTMU
RFU/RRU
RFU/RRU
RFU/RRU
BBU
2G Data3G Data
英文标题 :32-35pt
颜色 : R153 G0 B0
内部使用字体 :
FrutigerNext LT Medium
外部使用字体 : Arial
中文标题 :30-32pt
颜色 : R153 G0 B0
字体 : 黑体
英文正文 :20-22pt
子目录 (2-5 级 ) :18pt
颜色 : 黑色内部使用字体 :
FrutigerNext LT Regular
外部使用字体 : Arial
中文正文 :18-20pt
子目录 (2-5 级 ):18pt
颜色 : 黑色字体 : 细黑体
Hardware change:
• GTMU board must be removed while the whole site work in UMTS only mode. (This procedure will lead to all
the service suspend of the site )
• CPRI cables from GTMU to RRU and from WBBP to GTMU are not necessary without GTMU board.
• CPRI cables are necessary to connect between RRU3908 and WBBP.
• Transmission of interface Iub should be connected to WMPT .
Hardware change:
• GTMU board must be removed while the whole site work in UMTS only mode. (This procedure will lead to all
the service suspend of the site )
• CPRI cables from GTMU to RRU and from WBBP to GTMU are not necessary without GTMU board.
• CPRI cables are necessary to connect between RRU3908 and WBBP.
• Transmission of interface Iub should be connected to WMPT .
GU Dual Mode Evolve to UMTS Only
FAN
PWR
PWR
RRU3908 RRU3908 RRU3908
WBBP WMPT
Iub
UO UOUO
UMTS only
FAN
PWR
PWR
RRU3908 RRU3908 RRU3908
WBBP WMPT
Iub
Abis +
GTMU
GU GU GU
GSM&UMTS
英文标题 :32-35pt
颜色 : R153 G0 B0
内部使用字体 :
FrutigerNext LT Medium
外部使用字体 : Arial
中文标题 :30-32pt
颜色 : R153 G0 B0
字体 : 黑体
英文正文 :20-22pt
子目录 (2-5 级 ) :18pt
颜色 : 黑色内部使用字体 :
FrutigerNext LT Regular
外部使用字体 : Arial
中文正文 :18-20pt
子目录 (2-5 级 ):18pt
颜色 : 黑色字体 : 细黑体
Software change and configuration:
• The configuration of 2G BTS should be deleted.
• The work mode of RRU should be changed into UMTS only in UMTS system.
• The software version of BBU and RRU need not to be changed.
Influence:• It will impact whole site 3G traffic • In the whole procedure, WMPT and WBBP will not restart.• RRU3908 will restart automatically when the CPRI cables is moved and
GSM/UMTS cells service will be suspended until the RRU runs normally.
Software change and configuration:
• The configuration of 2G BTS should be deleted.
• The work mode of RRU should be changed into UMTS only in UMTS system.
• The software version of BBU and RRU need not to be changed.
Influence:• It will impact whole site 3G traffic • In the whole procedure, WMPT and WBBP will not restart.• RRU3908 will restart automatically when the CPRI cables is moved and
GSM/UMTS cells service will be suspended until the RRU runs normally.
GU Dual Mode Evolve to UMTS Only
英文标题 :32-35pt
颜色 : R153 G0 B0
内部使用字体 :
FrutigerNext LT Medium
外部使用字体 : Arial
中文标题 :30-32pt
颜色 : R153 G0 B0
字体 : 黑体
英文正文 :20-22pt
子目录 (2-5 级 ) :18pt
颜色 : 黑色内部使用字体 :
FrutigerNext LT Regular
外部使用字体 : Arial
中文正文 :18-20pt
子目录 (2-5 级 ):18pt
颜色 : 黑色字体 : 细黑体
Hardware change:
• GTMU is needed to be added to meet the 2G application.
• CPRI cables should be changed to connect between RRU and GTMU. (This procedure will lead to the
service suspend of the site )
• CPRI cables are necessary to connect between GTMU and WBBP.
• Transmission of interface Abis should be added.
Hardware change:
• GTMU is needed to be added to meet the 2G application.
• CPRI cables should be changed to connect between RRU and GTMU. (This procedure will lead to the
service suspend of the site )
• CPRI cables are necessary to connect between GTMU and WBBP.
• Transmission of interface Abis should be added.
UMTS Only Evolve to GU Dual ModeRRU3908
FAN
PWR
PWR
RRU3908 RRU3908
WBBP WMPT
Iub
UO UOUO
FAN
PWR
PWR
RRU3908 RRU3908 RRU3908
WBBP WMPT
Iub
Abis +
GTMU
GU GU GU
GSM&UMTS
英文标题 :32-35pt
颜色 : R153 G0 B0
内部使用字体 :
FrutigerNext LT Medium
外部使用字体 : Arial
中文标题 :30-32pt
颜色 : R153 G0 B0
字体 : 黑体
英文正文 :20-22pt
子目录 (2-5 级 ) :18pt
颜色 : 黑色内部使用字体 :
FrutigerNext LT Regular
外部使用字体 : Arial
中文正文 :18-20pt
子目录 (2-5 级 ):18pt
颜色 : 黑色字体 : 细黑体
Software change and configuration:• The data of 2G BTS should be configured.
• RRU’s work mode should be GSM&UMTS and SFP interface should be configured consistent
with hardware connection.
• The work mode of RRU should be changed into GSM&UMTS in NodeB maintenance terminal.
• The GSM software of GTMU should be downloaded and activated via BSC maintenance terminal
Influence:• It will impact whole site 3G traffic while hardware connecting.
• In the whole procedure, WMPT and WBBP will not restart.
• RRU3908 will restart automatically when the CPRI cables is moved and UMTS cells service will
be suspended until the RRU runs normally.
Software change and configuration:• The data of 2G BTS should be configured.
• RRU’s work mode should be GSM&UMTS and SFP interface should be configured consistent
with hardware connection.
• The work mode of RRU should be changed into GSM&UMTS in NodeB maintenance terminal.
• The GSM software of GTMU should be downloaded and activated via BSC maintenance terminal
Influence:• It will impact whole site 3G traffic while hardware connecting.
• In the whole procedure, WMPT and WBBP will not restart.
• RRU3908 will restart automatically when the CPRI cables is moved and UMTS cells service will
be suspended until the RRU runs normally.
UMTS Only Evolve to GU Dual Mode
英文标题 :32-35pt
颜色 : R153 G0 B0
内部使用字体 :
FrutigerNext LT Medium
外部使用字体 : Arial
中文标题 :30-32pt
颜色 : R153 G0 B0
字体 : 黑体
英文正文 :20-22pt
子目录 (2-5 级 ) :18pt
颜色 : 黑色内部使用字体 :
FrutigerNext LT Regular
外部使用字体 : Arial
中文正文 :18-20pt
子目录 (2-5 级 ):18pt
颜色 : 黑色字体 : 细黑体
GSM/UMTS Flexible Configuration
Conditions:
• Whole site works in GSM&UMTS dual mode
• Site must have one GSM cell at least.
• RRU should connect to GTMU
• Only change RRU work mode or capacity
No hardware change in dual mode flexible configuration change.
Conditions:
• Whole site works in GSM&UMTS dual mode
• Site must have one GSM cell at least.
• RRU should connect to GTMU
• Only change RRU work mode or capacity
No hardware change in dual mode flexible configuration change.
GTMU
FAN
PWR
PWR
RRU3908 GUAbis
WBBP WMPT
+ Iub
A CB
RRU3908 GSM RRU3908 UMTS
英文标题 :32-35pt
颜色 : R153 G0 B0
内部使用字体 :
FrutigerNext LT Medium
外部使用字体 : Arial
中文标题 :30-32pt
颜色 : R153 G0 B0
字体 : 黑体
英文正文 :20-22pt
子目录 (2-5 级 ) :18pt
颜色 : 黑色内部使用字体 :
FrutigerNext LT Regular
外部使用字体 : Arial
中文正文 :18-20pt
子目录 (2-5 级 ):18pt
颜色 : 黑色字体 : 细黑体
GSM/UMTS Flexible Configuration
Original Mode Target Mode Hardware Software configuration Software Version
GSM only GSM&UMTS No change RRU mode and SFP change Change to GU
GSM only UMTS only No change RRU mode and SFP change Change to UMTS
GSM&UMTS GSM only No change RRU mode and SFP change Change to GSM
GSM&UMTS UMTS only No change RRU mode and SFP change No change
UMTS only GSM only No change RRU mode and SFP change Change to GSM
UMTS only GSM&UMTS No change RRU mode and SFP change No Change
Change of RRU mode (Not concern transmission resource and UMTS baseband capacity)
Influence: • In the whole procedure, the boards in BBU will not restart.
• RRU will restart when the work mode is changed and service on the RRU will suspend until the RRU runs normally.
Influence: • In the whole procedure, the boards in BBU will not restart.
• RRU will restart when the work mode is changed and service on the RRU will suspend until the RRU runs normally.
英文标题 :32-35pt
颜色 : R153 G0 B0
内部使用字体 :
FrutigerNext LT Medium
外部使用字体 : Arial
中文标题 :30-32pt
颜色 : R153 G0 B0
字体 : 黑体
英文正文 :20-22pt
子目录 (2-5 级 ) :18pt
颜色 : 黑色内部使用字体 :
FrutigerNext LT Regular
外部使用字体 : Arial
中文正文 :18-20pt
子目录 (2-5 级 ):18pt
颜色 : 黑色字体 : 细黑体
IP sharing transmission
As shown in Figure 4-9, the dual-mode BTS can use the FE port (electrical port or optical port) or E1/T1 port. The 3G main control board provides routing functions for 2G traffic, and 2G traffic can be sent to the 3G transmission board through the interconnection between FE ports. In this way, the protocol termination and data distribution can be implemented. In addition, the 3G IP protocol stack should provide related router functions such as DHCP relay and ARP proxy for 2G traffic. Currently, the 3G version already supports the functions.
IP MW/PTN/IP MW/PTN/NGSDH/IP MPLSNGSDH/IP MPLS
RNC
BSC
IP over E1/FE
2G BSC data
NodeB integrate BTS data into IP over E1/FE pipe
PTN/Router/LAN switch, router the traffic to RNC and NodeB according to different VLAN
IP over E1/FE
GE
GE
3G data
2G BTS data
GTMU
WMPT
FE E1
FE E1/FE
IP MW/PTN/IP MW/PTN/NGSDH/IP MPLSNGSDH/IP MPLS
RNC
BSC
IP over E1/FE
2G BSC data
NodeB integrate BTS data into IP over E1/FE pipe
PTN/Router/LAN switch, router the traffic to RNC and NodeB according to different VLAN
IP over E1/FE
GE
GE
3G data
2G BTS data
GTMU
WMPT
FE E1
FE E1/FE
英文标题 :40-47pt
副标题 :26-30pt
字体颜色 : 反白内部使用字体 :
FrutigerNext LT Medium
外部使用字体 : Arial
中文标题 :35-47pt
字体 : 黑体 副标题 :24-28pt
字体颜色 : 反白字体 : 细黑体
HUAWEI TECHNOLOGIES CO., LTD.
www.huawei.com
Huawei Confidential
Thank You !
www.huawei.com