BEST IN DEVELOPMENT AND TECHNOLOGY TECHNICAL DATA SHEET /// MULTISTAK GENERAL Half-height, Full-height LTO-5 or -6 Drive Type SAS or Fibre Channel Interface Type Ultrium LTO-5 or -6 (Drive dependent) Media Type 6U Form Factor CONFIGURATION Max. 6 drives HH Drive Capacity 80 Slot Capacity 10 Mailslot Quantity 2 Number of Magazines CAPACITY From 200 TBytes (LTO-6) per Tape Native Capacity 500 TBytes (LTO-6) per Tape Compressed Capacity (2.5:1) Drive and interface dependent (with LTO-6 150 MB/s) Transfer Rate SPEED 2.000.000 Cycles Robotic MCBF RELIABILITY ACCESS AND OPERATION Password-protected with menus for configuration, management, status and diag- nostics; 5.7‘‘ color display with touch panel Front Operator Panel Via standard Ethernet connection 10/100/1000 Mbit; web-based, no client tool necessary, touch panel and configuration on main module Remote Management Interface 1 Main Module Number of Modules BASE MODULE FULL STACK Max. 42U Main Module with 6 Expansion Modules Max. 42 LTO-5, -6 drives, also mixed 560 Max. 70 14 1.4 PBytes (LTO-6) per Library 3.5 PBytes (LTO-6) per Library
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Best in development and technology
technical data sheet/// mUltistaK
general Half-height, Full-height LTO-5 or -6Drive Type
SAS or Fibre ChannelInterface Type
Ultrium LTO-5 or -6 (Drive dependent)Media Type
6UForm Factor
configUration
Max. 6 drives HHDrive Capacity
80Slot Capacity
10Mailslot Quantity
2Number of Magazines
capacityFrom 200 TBytes (LTO-6) per TapeNative Capacity
500 TBytes (LTO-6) per TapeCompressed Capacity (2.5:1)
Drive and interface dependent (with LTO-6 150 MB/s)Transfer Ratespeed
2.000.000 CyclesRobotic MCBFreliaBility
access and operationPassword-protected with menus for configuration, management, status and diag-nostics; 5.7‘‘ color display with touch panel
Front Operator Panel
Via standard Ethernet connection 10/100/1000 Mbit; web-based, no client tool necessary, touch panel and configuration on main module
Remote Management Interface
1 Main ModuleNumber of Modules
BASE MODULE FULL STACK
Max. 42U
Main Module with 6 Expansion Modules
Max. 42 LTO-5, -6 drives, also mixed
560
Max. 70
14
1.4 PBytes (LTO-6) per Library
3.5 PBytes (LTO-6) per Library
environmental reqUirements ≤ 5.8dBNoise Emissions
0.21 Grms 5-500 Hz (operating)Vibration
10°C to 35°COperating Temperature
20% to 80% (non-condensing)Operating Humidity
Best in development and technology
technical data sheet/// mUltistaK
poWer1 or 2 (2nd as redundant) per modulePower Supply Quantity
100-240 VAC (50-60 Hz)Input Voltage
300W (with one supply; Bronze 80 Plus - Green Power Supply)
Power Consumption
BDT MeDia auToMaTion GMBHSaline 29 /// 78628 Rottweil /// Germany
Tel. +49 (0) 741 / 248 01 /// Fax +49 (0) 741 / 248 224
www.bdt.de /// Mail [email protected]
The information contained herein is subject to change without notice. BDT shall not be
liable for technical or editorial errors or omissions contained herein.
As of: July 2015. Rev.: 2015-7.1
physical dimensions 475 mm (18.7‘‘)Width
892 mm (35.1‘‘)Depth
268 mm (10.55‘‘) Height
43.6 kg (90.4 lbs)Weight
featUres Max. 20, dynamically configurablePartitions
SSL/TLS 1.2, User Management / LDAP Integration
Safety
1 Gbit EthernetNetwork
IPv4 / IPv6Protocol
Wizard basedConfiguration
SNMP with Trap Alerts; Error and Warning Email Alert System
Network Management
Sophisticated log-system using error depen-dent user guidance
Error and System Logging
800 mm (31.5‘‘)
1200 mm (47.2‘‘)
615 mm (24.2‘‘)
54.5 kg (120.1 lbs)
OUT OF BOX SHIPPING
NOTE:
The weight of each library varies somewhat based on the type and number
of LTO tape drives contained in the configuration. Configurations with diffe-
rent numbers of tape drives can be calculated by adding or subtracting the
weight of a tape drive.
An LTO-6 Ultrium drive weighs 2.1 kg (4.63 lbs).
Related Documents
