Technical catalogue
Technical catalogue
1Z 0002
AT FIRST SIGHT
Important informations
Our new technical catalogue includes now all important information you will need for planing or call for tenders. Every single article withphoto, technical data and specification is described on one page. That makes it easy for you to find all necessary technical informationfor each LAUFEN article.
Technical dataHere are the main points on one view: – article number for ordering– certified standards– dimensions in mm– standard option (on stock)– special options (not on stock)– water inlet for urinals– water outlet for toilets and urinals– weight in kg– accessories excl. suits all ceramic LAUFEN articles– mounting accessories incl. automatically on delivery– mounting accessories excl. which we recommend for installation and– have to be ordered separately
SpecificationsYou can import that text directly in your offer for projects. For each article and even for each size of washbasin a separate text.
Technical dataAll necessary measurements in scale 1:20, accessories 1:10 are included in the drawings. You can easily use them for planing.
GeneralAll indicated measurements to the floor or the wall are understood tobe inclusive of the finished surface, that means from the „finished floor“or „finished wall“.
The mounting surfaces of the sanitary fixtures are flat. To compensatefor irregularities in the wall or floor, levelling material is to be applied to the mounting surfaces. Suitable materials are white cement, groutingcement, Portland cement, etc. Levelling material is available as LAUFENproduct no. 89461.4.
Wall and floor surfaces must withstand the surface pressuresimposed by the mounting and utilisation of the fixtures. The ability ofthe sanitary fixtures to bear the loads imposed in use depends on anadequate load-bearing capacity in the walls and floors on which theyare mounted.
TIPS FOR USING THIS GUIDE
INSTALLATION ADVISES
INSTRUCTIONS FOR CARE
SPECIAL REMARKS
GUARANTEE
INSTALLATION ADVISESWashbasins / Small washbasinsAs a rule, the mounting height of approx. 850 mm for washbasins andsmall washbasins refers to the height above the finished floor level, tothe upper edge of the front of the washbasin or small washbasin.
If it is decided to mount the fixtures above or below this height, the connections for the trap and corner valves must be altered appropriately.
In case of pedestal mounting, the height of the upper edge of the wash-basin must be fixed according to the height of the pedestal.
The dimensions stated for the trap connection heights in washbasinsand small washbasins apply the off-centre waste fittings. In the case of plug or screen valves, approx. 50 mm must be added to trap con-nection height depending on the type of fitting.
The glaze of ceramic fixtures resists the acids, solvents and alkaliscontained in most toiletries, cleansers and cosmetics. Please removeresidues of such agents and refer to the instructions of the manufac-turer of these products.
If sanitary fixtures with a ceramic trap (WC’s, urinals, etc.) are exposedto frost, a suitable anti-freezing preventative must be added to thewater in the trap.
For ceramic with WonderGliss surfaces and non ceramic parts, e.g. WC seat, furniture, stone, metal, etc. use abrasive cleaners.
Owing to different light conditions or variations in sanitary ware sur-faces, identical colours may evoke different impressions.
Subject to alterations. Subject to printing errors. Models and technicaldetails were updated before printing. The manufacturer reserves theright of alterations in construction and details.
5 years guarantee for ceramic products when installed by a licensedplumber.
2Z 0002
WONDERGLISS
True cleanliness is meant to last
With Wondergliss, the cleaning of your ceramic sanitary ware becomeschild’s play. Due to this especially smooth surface coating, dirt andhard water desposits don’t stand a chance – they simply drip off withthe water. And since there is no build-up of deposits, there is no moreneed for strong cleansing agents.
Wondergliss owes is fabulous properties to very tiny particles – so-callednanoparticles. Those tiny elements can be found between the atomicceramic components and are responsible for the material’s pore-freesurface. Owing to this revolutionary development of the high-tech com-pany NANOGATE, the few remaining deposits may simply be wipedaway.
ON THE SURFACE IT SEEMS TO BE A MIRACLE
THE GREATES EFFECT RESULTS FROM THESMALLEST DETAIL
GREAT SUCCESS DUE TO THE HIGH QUALITYThe surface of Wondergliss ceramic sanitary ware by Laufen will stayshining and smooth for an especially long period of time. The secret forthat lies in the furnace: The Wondergliss coating is not only applied tothe surface but is also fired. This procedure secures an especially highlevel of quality and causes absolutely no damage to the environment.
DESIGN � � � � �
FIORA DUE � � � � � �
GALLERY DUE � � � � �
OREGON � � � � � �
SANO � � �
BIJOU � � � � � �
BIROVA � � � � � �
COMPAC � � � � � �
CRISTAL � � � � � �
FIORA � � � � � �
LIPSY � � �
SAVOY � � � � � �
ALESSI �1)
FIORA � � � � � �
INDOVA � � � � � �
LAURA � � �
MYLIFE �1)
OBJECT 2) � � � � � � �
VIENNA � � � � � �
COUNTERTOP BASINS
FIORA � � � � � �
GALLERY � � � � �
PALACE / PALACE DUE � � � � � �
VIENNA-VARIA � � � � � �
COUNTERTOP BASINS CUTABLE
DROP IN BASINS
BUILT IN BASINS
000
(200
)W
hite
018
(218
)B
aham
abei
ge
037
(237
)M
anha
ttan
046
(246
)W
hisp
erb
lue
049
(249
)P
erga
mon
050
(250
)Ä
gäis
757
(290
)E
del
wei
ss
927
(299
)G
rani
ti
COLOUR TABLE
SET ALESSI �1)
SET DESIGN � � � � �
SET MYLIFE �1)
SET VIENNA � � � � � �
SET GALLERY � � � � �
SET SWING � � � � � �
STUDIO LINE
Z 0002
COLOURS
000 White
018 Bahamabeige
037 Manhattan
046 Whisperblue
049 Pergamon
050 Ägäis
757 Edelweiss
927 Graniti
WonderGliss is available on all studio lineproducts. Please use the following numbers for yourorder:
200 White 218 Bahamabeige237 Manhattan 246 Whisperblue249 Pergamon 250 Ägäis290 Edelweiss 299 Graniti
1) = only available in 200 White WonderGliss2) = not available with WonderGliss
GALLERY � � � � �
OBJECT 2) � � � � � � �
SWING � � � � � �
VIENNA � � � � � �
SEMI RECESSED BASINS
CAPRINO 2) � � � � � �
CASA 2) � � � � � � �
COMO 2) � � � �
KAPRUN 2) � � � �
TAMARO 2) / TAMARO-S60 2) / TAMARO-S60B 2) / TAMARO-VS 2) � � � � � �
TARO-NOVA 2) / TARO-UNI 2) � � � � � �
RION 2) � � � � � �
BAMBI 2) �
BERNINA 2) �
COLLEGE 2) �
REHAB 2) �
1) = only available in 200 White WonderGliss2) = not available with WonderGliss
URINALS
SPECIAL ARTICLES
000
(200
)W
hite
018
(218
)B
aham
abei
ge
037
(237
)M
anha
ttan
046
(246
)W
hisp
erb
lue
049
(249
)P
erga
mon
050
(250
)Ä
gäis
757
(290
)E
del
wei
ss
927
(299
)G
rani
ti
COLOUR TABLE
SET BATHLINE 2) � � �
SET DORADO 2) � � � � � �
SET LIBERTYLINE 2) � � � � � �
SET OBJECT 2) � � 1) � 1) � 1) � � 1) �
PROFESSIONAL LINE
UNIVERSAL 2) � � � � � � �
ACCESSORIES
ALESSI �1)
MYLIFE �1)
WASHBASIN BOWLS
Z 0002
COLOURS
000 White
018 Bahamabeige
037 Manhattan
046 Whisperblue
049 Pergamon
050 Ägäis
757 Edelweiss
927 Graniti
WonderGliss is available on all studio lineproducts. Please use the following numbers for yourorder:
200 White 218 Bahamabeige237 Manhattan 246 Whisperblue249 Pergamon 250 Ägäis290 Edelweiss 299 Graniti
S E T A L E S S I
SET ALESSI
Washbasin
1.1
220
525
7055
0
185
600
850
280
120
520
430
81097.1
Order no. 81097.1Certified to DIN EN 32Dimensions 520 x 525 mmSpecification Charge 104 – 1 centre tap hole
with integrated syphon coverSpecial specification Charge 109 – without tap hole
with integrated syphon coverWeight 20,5 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
Z 0002
Mounting acc. incl. Charge 104 – run off and overflow system Clou GEBERIT, order no. 89194.1Charge 109 – valve without overflow, order no. 89543.9Special nut M10, order no. 89097.0
Mounting acc. excl. Stone screw fixing set M10Colours see colour table
220
525
7055
0
185
600
850
280
120
600
430
Washbasin81097.2
Order no. 81097.2Certified to DIN EN 32Dimensions 600 x 525 mmSpecification Charge 104 – 1 centre tap hole
with integrated syphon coverSpecial specification Charge 109 – without tap hole
with integrated syphon coverWeight 25,5 kg
Mounting acc. incl. Charge 104 – run off and overflow system Clou GEBERIT, order no. 89194.1Charge 109 – valve without overflow, order no. 89543.9Special nut M10, order no. 89097.0
Mounting acc. excl. Stone screw fixing set M10 Colours see colour table
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
1.2Z 0002
SET ALESSI
220
530
530 ~6
55*
185
600
850120
520
~250*
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
1.3Z 0002
SET ALESSI
Washbasin81197.1
Order no. 81197.1Certified to DIN EN 32Dimensions 520 x 530 mmSpecification Charge 104 – 1 centre tap hole
with integrated pedestalSpecial specification Charge 109 – without tap hole
with integrated pedestalWeight 41,0 kg
* = Determiner the exact dimension for the fixing set 89175.7 during the installation.
Mounting acc. incl. Charge 104 – run off and overflow system Clou GEBERIT, order no. 89194.1Charge 109 – valve without overflow, order no. 89543.9Fixing set, order no. 89175.7
Colours see colour table
280
500
80
225
530/
560*
600/
660* 90
0
500
120/160*
50
Order no. 81397.1Certified to DIN EN 32Dimensions 500 x 500 mmSpecification 1 centre tap hole Weight 10,0 kg
Drop in basin81397.1
* = Adhere to these dimensions if ALESSI-INDA furniture is being fitted.
Mounting acc. incl. with concealed ceramic outlet and overflow, chrome-plated vertical cover, order no. 89097.8Template, order no. 89197.3
Mounting acc. excl. Syphon D40 chrome order no. 89397.9Colours see colour table
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
1.4Z 0002
SET ALESSI
Mounting indication
3
2
1
1. Vanity basin2. Worktop3. Silicon caoutchouc
DESCRIPTIONmatching for Drop in basin order no. 81397.1
TECHNICAL DATA
1.5Z 0002
SET ALESSI
280
520
175
530/
560*
600/
560* 90
0
520
120/160*
50
Washbasin bowl81897.1
Order no. 81897.1Certified to DIN EN 32Dimensions 520 x 520 mmSpecification Charge 104 – 1 centre tap hole Special specification Charge 109 – without tap hole Weight 12,5 kg
* = Adhere to these dimensions if ALESSI-INDA furniture is being fitted.
Mounting acc. incl. Charge 104 – run off and overflow system Clou GEBERIT, order no. 89194.1Charge 109 – valve without overflow, order no. 89543.9Template, order no. 89197.8Fixing set, order no. 89194.0
Mounting acc. excl. Syphon D40 chrome, order no. 89397.9Colours see colour table
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
1.6Z 0002
SET ALESSI
Fixing set89194.0
2
1
4
5
6
7
3
1. Washbasin bowl2. Worktop3. Silicon caoutchouc4. Plug5. Washer6. Hexagonal nut7. Grubscrew
DESCRIPTIONOrder no. 89194.0matching for Washbasin bowl, order no. 81897.1
TECHNICAL DATA
1.7Z 0002
SET ALESSI
Floorstanding WC combination
370 160
70-300
260
390
720
950
890
185
465
415
45
100
82297.6
Order no. 82297.6Certified to EN 997Specification Washdown for 6-l-flushOutlet horizontal
VARIO, vertical 70 - 300 mmWeight 36,0 kgAccessories excl. Cistern, order no. 82697.1
Seat and cover, order no. 89297.1
Mounting acc. incl. Device for fixing, order no. 89175.7Mounting acc. excl. for horizontal outlet use commercial straight
connection tubes for VARIO outlet 70 - 160 and 205 mm use GEBERIT-connection set, order no. 152.647for VARIO outlet 220 - 300 mm use only LAUFEN-connection set, order no. 89902.5
Colours see colour table
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
1.8Z 0002
SET ALESSI
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
1.9Z 0002
SET ALESSI
370 160340
485
425
100
Order no. 82697.1Certified to DIN 19542matching for Floorstanding WC pan order no. 82297.6Specification Dual-Flush (3/6-l-flush)
water condensation insulationWater inlet rearWeight 10,0 kg
Cistern82697.1
Mounting acc. includedColours see colour tablenten Mitt
390
585
70
415
45
95
125
18535
0
Floorstandimg WC pan82197.1
Order no. 82197.1Certified to DIN 19542Specification Washdown for 6-l-flushOutlet horizontal
vertical 70 and 125 mmWeight 29,5 kgAccessories excl. Seat and cover, order no. 89297.1
Mounting acc. incl. Device for fixing, order no. 89175.7Mounting acc. excl. for horizontal outlet use commercial straight
connection tubesfor outlet vertical 70 mm LAUFEN-connection set, order no. 89009.2 for outlet vertical 125 mm LAUFEN-connection set, order no. 89902.7
Colours see colour table
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
1.10Z 0002
SET ALESSI
SET ALESSI
Wallhung WC pan
1.11
390
585
180
135
225
100
30
415
45
60
82097.6
Order no. 82097.6Certified to EN 997Specification Washdown for 6-l-flushOutlet horizontalWeight 24,5 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
Z 0002
Mounting acc. incl. Fixing set for wall LAUFEN, order no. 89097.1Mounting acc. excl. commercial water outlet connection
Stone screw fixing setColours see colour table
Order no. 89297.1matching for Floorstanding WC pan order no. 82297.6,
82197.1Wallhung WC pan order no. 82097.6
Specification removablewith automatic lowering systemwith ACTIVE SHIELD
Weight 2,8 kg
Seat and cover89297.1
Mounting acc. includedColours see colour tablenten Mitt
TECHNICAL DATA
1.12Z 0002
SET ALESSI
SET ALESSI
Floorstanding bidet
1.13
585
120 25
0 415
390 225150
83297.1
Order no. 83297.1Specification 1 centre tap hole Weight 22,0 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
Z 0002
Mounting acc. incl. Run off and overflow system Clou GEBERIT, order no. 89194.1Device for fixing, order no. 89175.7
Mounting acc. excl. Syphon D40 chrome order no. 89394.9Colours see colour table
Order no. 83097.1Specification 1 centre tap hole Weight 18,5 kg
585
325
215
120 6025
0 415
390 225
180
120
Wallhung bidet83097.1
Mounting acc. incl. Run off and overflow system Clou GEBERIT, order no. 89194.1Fixing set for wall LAUFEN, order no. 89097.1
Mounting acc. excl. Syphon D40 chrome order no. 89394.9 Stone screw fixing set
Colours see colour table
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
1.14Z 0002
SET ALESSI
Order no. 84097.1Certified to DIN 1390Water inlet concealedOutlet horizontalFlushing quantity minimum 1 lFlushing capacity minimum 0,3 l/sWeight 10,0 kgAccessories excl. Cover for urinal, order no. 89497.1
200
58529
510
0
520 13
0
650
420
395
60
290
325
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
1.15Z 0002
SET ALESSI
Syphonic urinal84097.1
Mounting acc. incl. Fixing set for wall LAUFEN, order no. 89097.1Mounting acc. excl. horizontal inlet connection GEBERIT,
order no. 152.489 Syphon with horizontal outlet GEBERIT,order no. 152.939.11.1Stone screw fixing set
Colours see colour table
Cover for urinal89497.1
Order no. 89497.1matching for Syphonic urinal, order no. 84097.1Weight 0,8 kg
Mounting acc. includedColours see colour tablenten Mitt
TECHNICAL DATA
1.16Z 0002
SET ALESSI
S E T D E S I G N
700
385
590
660
255
645
360
850
600
530
80-120
370
250
280
60
210
20
80-120
250
280
60
210
600
530
~850
*
SET DESIGN
Washbasin
* = Effective height must be fixed according to the height of the pedestal.
2.1Z 0002
81154.0
Order no. 81154.0Certified to DIN EN 32Dimensions 700 x 645 mmSpecification 1 centre tap hole
anti-splash rimWeight 22,0 kgAccessories excl. Syphon cover, order no. 81997.1
Pedestal, order no. 81954.0
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAMounting acc. incl. Lateral cover, order no. 89653.9Mounting acc. excl. Mounting set, order no. 89988.2Colours see colour table
660
590
700
770
255
385
645
280
600 ~8
50*
530
60
210
80-120
250
360
850
600
530
80-120
280
60
210
250
370
20
SET DESIGN
Washbasin
* = Effective height must be fixed according to the height of the pedestal.
2.2Z 0002
81154.1
Order no. 81154.1Certified to DIN EN 32Dimensions 700 x 645 mmSpecification 1 centre tap hole
anti-splash rimwith integrated towel rail left and right
Weight 22,0 kgAccessories excl. Syphon cover, order no. 81997.1
Pedestal, order no. 81954.0
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAMounting acc. incl. Lateral cover, order no. 89653.9Mounting acc. excl. Mounting set, order no. 89988.2Colours see colour table
Order no. 81997.1matching for Washbasins order no. 81154.0, 81154.1Weight 14,5 kgMounting acc. incl. Device for fixing, order no. 89460.5Colours see colour table
Order no. 81954.0matching for Washbasins order no. 81154.0, 81154.1 Weight 24,5 kgMounting acc. includedColours see colour table
Syphon cover81997.1
Pedestal set81954.0
TECHNICAL DATA / SYPHON COVER TECHNICAL DATA / PEDESTAL SET
SET DESIGN
2.3Z 0002
2.4
280
50
80-120
600
200
530
~850
*
80-120
850
600
530
280
200
50
585
1040
180
Z 0002
Order no. 81354.7Certified to DIN EN 32Dimensions 1040 x 585 mmSpecification 1 centre tap hole
anti-splash rimSpecial specification 3 tap holes Weight 20,0 kgAccessories excl. Pedestal, order no. 81954.7
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
Countertop basin 81354.7
SET DESIGN
* = Effective height must be fixed according to the height of the pedestal.
Mounting acc. excl. Mounting set, order no. 89988.2Colours see colour table
SET DESIGN
Pedestal81954.7
Order no. 81954.7matching for Washbasin order no. 81354.7Weight 7,0 kg
TECHNICAL DATA
2.5Z 0002
Colours see colour table
SET DESIGN
Small washbasin
2.6
395
370
450
145
235
390
180
60
80-120
250
300
185
530 60
0
850
Z 0002
81697.4
Order no. 81697.4Certified to DIN EN 111Dimensions 450 x 390 mmSpecification 1 centre tap hole
anti-splash rim Weight 10,5 kgAccessories excl. Syphon cover, order no. 81997.5
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAMounting acc. incl. Lateral cover, order no. 89653.9Mounting acc. excl. Mounting set, order no. 89988.2Colours see colour table
SET DESIGN
Syphon cover81997.5
Order no. 81997.5matching for Small washbasin order no. 81697.4 Weight 3,0 kg
TECHNICAL DATA
2.7Z 0002
Mounting acc. incl. Device for fixing, order no. 89460.7Colours see colour table
SET DESIGN
Floorstanding WC combination
2.8
375
660
400
835
750
175
2539
0
70-130
170
185
Z 0002
82149.9
Order no. 82149.9Certified to EN 997, EN 33Specification Washdown for 6 l-flushOutlet horizontal
VARIO, vertical 70 - 130 mmWeight 23,5 kgAccessories excl. Cistern, order no. 82049.0, 82049.5 or 82749.0
Seat and cover, order no. 89141.0
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAMounting acc. incl. Mounting set, order no. 89553.8
Lateral cover, order no. 89653.9Mounting acc. excl. Special elbow for vertical connection
70 - 130 mm, order no. 89009.2Colours see colour table
Cistern82049.0
SET DESIGN
TECHNICAL DRAWINGS / S 1 : 20
400
335 42
0
175
Order no. 82049.0Certified to DIN 19542matching for Floorstanding WC pan order no. 82149.9Specification Flushing mechanisme GEBERIT
water condensation insulationFlush can be interrupted by pressing twice
Water inlet rearWeight 13,5 kg
TECHNICAL DATA / CISTERN
2.9Z 0002
Mounting acc. excl. Corner valve for water inletColours see colour table
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
2.10Z 0002
SET DESIGN
Order no. 82049.5Certified to BS Standardmatching for Floorstanding WC pan order no. 82149.9Specification Flushing mechanisme DUDLEY
water condensation insulationbottom water overflow
Water inlet bottomWeight 13,5 kg
Cistern82049.5
400
420
175
40
295
Mounting acc. incl. Water inlet flexibel host, order no. 89049.2flexibel host for overflow tube, order no. 89049.1
Mounting acc. excl. Corner valve for water inletColours see colour table
Order no. 82749.0matching for Floorstanding WC combination order no. 82149.9Specification Flushing mechanisme DAL
water condensation insulationFlush can be interrupted by pressing twice
Water inlet rearWeight 13,5 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
2.11Z 0002
SET DESIGN
Cistern82749.0
400
335 42
0
175
Mounting acc. excl. Corner valve for water inletColours see colour table
SET DESIGN
Floorstanding WC pan
2.12
375
570
400
390
70
390
345
185
100
Z 0002
82149.0
Order no. 82149.0Certified to EN 997, EN 37Specification Washdown for 6-l-flushOutlet horizontal
vertical 70 mm Weight 20,5 kgAccessories excl. Seat and cover, order no. 89141.0
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAMounting acc. incl. Mounting set, order no. 89553.8
Lateral cover, order no. 89653.9Mounting acc. excl. Special elbow for vertical connection 70 mm,
order no. 89009.2Colours see colour table
SET DESIGN
Seat and cover89141.0
Order no. 89141.0matching for Floorstanding WC pan order no. 82149.9
or 82149.0Specification Snap catch for easy removalWeight 2,5 kg
TECHNICAL DATA
2.13Z 0002
Mounting acc. incl. premounted on WC panColours see colour table
SET DESIGN
Floorstanding bidet
2.14
400
570
385 150
405
100
245
405
215
Z 0002
83149.1
Order no. 83149.1Specification 1 centre tap hole
anti-splash rimWeight 21,0 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAMounting acc. incl. Syphonfixing, order no. 89746.0
Mounting set, order no. 89553.8Lateral cover, order no. 89653.9
Mounting acc. excl. Connection of mixer with the angle valves with standard hoses. Note the installation instruction of the hose supplier.
Colours see colour table
Order no. 87150.0Dimensions 30 x 50 x 50 mmSpecification Self adhesive fixingWeight 0,6 kg
50
50
30
TECHNICAL DRAWINGS / S 1 : 10
TECHNICAL DATA
2.15Z 0002
SET DESIGN
Hook87150.0
Colours see colour table
Order no. 87162.0Certified to CE Dimensions 660 x 120 mmWeight 3,0 kgAccessories incl. Bulb
120
75
660
TECHNICAL DRAWINGS / S 1 : 10
TECHNICAL DATA
2.16Z 0002
SET DESIGN
Lamp87162.0
Mounting acc. includedColours see colour table
Order no. 87154.6Dimensions 660 x 140 mmWeight 3,7 kg
660 140
85
TECHNICAL DRAWINGS / S 1 : 10
TECHNICAL DATA
2.17Z 0002
SET DESIGN
Shelf87154.6
Mounting acc. includedColours see colour table
Order no. 87166.0Dimensions 120 x 140 mmWeight 0,9 kg
120
140
140
85
TECHNICAL DRAWINGS / S 1 : 10
TECHNICAL DATA
2.18Z 0002
SET DESIGN
Soap dish87166.0
Mounting acc. includedColours see colour table
Order no. 87167.0Dimensions 120 x 140 mmWeight 0,9 kg
120
140
140
85
TECHNICAL DRAWINGS / S 1 : 10
TECHNICAL DATA
2.19Z 0002
SET DESIGN
Glass holder87167.0
Mounting acc. includedColours see colour table
Order no. 87156.0Dimensions 98 x 470 x 110 mmWeight 0,35 kg
45
415
470
5525
110
45
98
TECHNICAL DRAWINGS / S 1 : 10
TECHNICAL DATA
2.20Z 0002
SET DESIGN
Towel rail87156.0
Mounting acc. includedColours see colour table
Order no. 87158.0Dimensions 600 x 85 x 140 mmWeight 3,5 kg
600 85
140
TECHNICAL DRAWINGS / S 1 : 10
TECHNICAL DATA
2.21Z 0002
SET DESIGN
Towel rail87158.0
Mounting acc. includedColours see colour table
Order no. 87161.0Dimensions 185 x 140 mmWeight 1,7 kg
140
14563
33
70
120
185
TECHNICAL DRAWINGS / S 1 : 10
TECHNICAL DATA
2.22Z 0002
SET DESIGN
Toilet roll holder87161.0
Mounting acc. includedColours see colour table
Order no. 87168.0Dimensions 140 x 140 mmWeight 2,3 kg
140
275
140
240
35
TECHNICAL DRAWINGS / S 1 : 10
TECHNICAL DATA
2.23Z 0002
SET DESIGN
Toilet brush holder87168.0
Mounting acc. includedColours see colour table
S E T M Y L I F E
SET MYLIFE
Washbasin
* = Effective height must be fixed according to the height of the pedestal.
3.1
250
530
150
50
600
530
850
750
280
120
150
50
600
530
~850
*
280
120
81094.6
Order no. 81094.6Certified to DIN EN 32Dimensions 750 x 530 mmSpecification Charge 104 – 1 centre tap holeSpecial specification Charge 108 – 3 tap holes
Charge 109 – without tap holeWeight 15,5 kgAccessories excl. Syphon cover, order no. 81994.1
Pedestal, order no. 81994.0
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
Z 0002
Mounting acc. incl. Charge 104 and 108 – run off and overflow system Clou GEBERIT, order no. 89194.1Charge 109 – valve without overflow, order no. 89543.9
Mounting acc. excl. Mounting set, order no.89988.2Colours see colour table
260
600
150
5060
053
0
850
950
280
120
150
5060
053
0
~850
*
280
120
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
3.2
SET MYLIFE
Washbasin
* = Effective height must be fixed according to the height of the pedestal.
81094.7
Order no. 81094.7Certified to DIN EN 32Dimensions 950 x 600 mmSpecification Charge 104 – 1 centre tap holeSpecial specification Charge 108 – 3 tap holes
Charge 109 – without tap holeWeight 23,0 kgAccessories excl. Syphon cover, order no. 81994.1
Pedestal, order no. 81994.0
Z 0002
Mounting acc. incl. Charge 104 and 108 – run off and overflow system Clou GEBERIT, order no. 89194.1Charge 109 – valve without overflow, order no. 89543.9
Mounting acc. excl. Mounting set, order no.89988.2Colours see colour table
SET MYLIFE
Order no. 81994.1matching for Washbasins order no. 81094.6, 81094.7 Weight 9,5 kgMounting acc. incl. Device for fixing, order no. 89001.0Colours see colour table
Order no. 81994.0matching for Washbasins order no. 81094.6, 81094.7 Weight 11,5 kgMounting acc. incl. Device for fixing, order no. 89175.5 Colours see colour table
Syphon cover81994.1
Pedestal81994.0
TECHNICAL DATA / SYPHON COVER TECHNICAL DATA / PEDESTAL
3.3Z 0002
3.4
215
480
30
145
530 60
0
850
750
120
Order no. 81194.6Dimensions 750 x 480 mmSpecification Charge 104 – 1 centre tap hole Special specification Charge 109 – without tap hole Weight 13,5 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
Drop in basin81194.6
SET MYLIFE
Mounting acc. incl. Charge 104 – run off and overflow system Clou GEBERIT, order no. 89194.1Charge 109 – valve without overflow, order no. 89543.9Template, order no. 89794.6
Mounting acc. excl. Mounting set, order no. 89909.0Colours see colour table
SET MYLIFE
Fixing set89909.0
2
3
4
6
1
5
1. Vanity basin2. Worktop3. Fixing part4. Adjusting screw5. Hexagonal screw with plug6. Silicon caoutchouc
DESCRIPTIONOrder no. 89909.0matching for Drop in basin, order no. 81194.6
TECHNICAL DATA
3.5Z 0002
225
440
140
160
530 60
0
885
650
120
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
3.6
SET MYLIFE
Washbasin bowl81894.4
Order no. 81894.4Dimensions 650 x 440 mmSpecification Charge 104 – 1 centre tap hole Special specification Charge 109 – without tap hole Weight 13,0 kg
Z 0002
Mounting acc. incl. Charge 104 – run off and overflow system Clou GEBERIT, order no. 89194.1Charge 109 – valve without overflow, order no. 89543.9Template, order no. 89794.4Mounting set, order no. 89194.0
Colours see colour table
SET MYLIFE
Fixing set89194.0
2
1
4
5
6
7
3
1. Washbasin bowl2. Worktop3. Silicon caoutchouc4. Plug5. Washer6. Hexagonal nut7. Grubscrew
DESCRIPTIONOrder no. 89194.0matching for Washbasin bowl, order no. 81894.4
TECHNICAL DATA
3.7Z 0002
SET MYLIFE
Floorstanding WC combination
3.8
415 160
70-300
260
390
720
960
875
185 40
025
100
82294.3
Order no. 82294.3Certified to EN 997, EN 33Specification Washdown for 6-l-flushOutlet horizontal
VARIO, vertical 70 - 300 mmWeight 33,0 kgAccessories Cistern, order no. 82694.1
Seat and cover, order no. 89294.1
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
Z 0002
Mounting acc. incl. Device for fixing, order no. 89175.7Mounting acc. excl. for VARIO-outlet 70 - 220 mm LAUFEN-
connection, order no. 89009.2 for VARIO-outlet 220 - 300 mm only LAUFEN-connection, order no. 89902.5
Colours see colour table
SET MYLIFE
415 160330
535
450 510
100
TECHNICAL DRAWINGS / S 1 : 20
Cistern82694.1
TECHNICAL DATA Order no. 82694.1Certified to DIN 19542matching for Floorstanding WC pan order no. 82294.3Specification Flushing mechanisme GEBERIT
water condensation insulationDual-Flush (3/6-l-flush)
Water inlet rearWeight 10,0 kg
3.9Z 0002
Mounting acc. includedColours see colour tablehinten Mitt
SET MYLIFE
Wallhung WC pan
3.10
390
610
180
135
225
100
30
400
25
40
55
82094.6
Order no. 82094.6Certified to EN 997, EN 38Specification Washdown for 6-l-flushOutlet horizontalWeight 26,0 kgAccessories excl. Seat and cover, order no. 89294.1
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
Z 0002
Colours see colour table
SET MYLIFE
TECHNICAL DATAOrder no. 89294.1matching for Floorstanding WC pan order no. 82294.3
Wallhung WC pan order no. 82094.6,
Specification Snap catch for easy removalwith automatic lowering system
Seat and cover89294.1
3.11Z 0002
Mounting acc. includedColours see colour tablehinten Mitt
SET MYLIFE
Floorstanding bidet
3.12
610
120 24
0 400
35
390
50
315150
83294.1
Order no. 83294.1Specification 1 centre tap holeSpecial specification 3 tap holesWeight 22,5 kgAccessories excl. Bidet seat, order no. 89394.1
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
Z 0002
Mounting acc. incl. Run off and overflow system Clou GEBERIT, order no. 89194.1Device for fixing, order no. 89175.7
Mounting acc. excl. Syphon LAUFEN, order no. 89394.9Colours see colour table
Order no. 83094.1Specification 1 centre tap holeWeight 18,5 kgAccessories excl. Bidet seat, order no. 89394.1
610
325
215
120 5524
0 400
35
390
40
265
180
120
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
3.13
SET MYLIFE
Wallhung bidet83094.1
Z 0002
Mounting acc. incl. Run off and overflow system Clou GEBERIT, order no. 89194.1
Colours see colour table
SET MYLIFE
Bidet seat89394.1
TECHNICAL DATAOrder no. 89394.1matching for Floorstanding bidet order no. 83294.1
Wallhung bidet order no. 83094.1 Specification Snap catch for easy removalWeight 1,0 kg
3.14Z 0002
Mounting acc. includedColours see colour table
S E T V I E N N A
600
460
220
80-120
50
280
220
530 60
0 850
80-120
50
220
530 60
0 ~845
*
280
SET VIENNA
Washbasin
* = Effective height must be fixed according to the height of the pedestal.
4.1Z 0002
81003.4
Order no. 81003.4Certified to DIN EN 32Dimensions 600 x 460 mmSpecification 1 centre tap holeSpecial specification 3 tap holes Weight 14,0 kgAccessories excl. Syphon cover, order no. 81903.1
Pedestal, order no. 81903.0
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAMounting acc. excl. Mounting set, order no. 89988.2Colours see colour table
550
280
850
600
530
220
50
80-120
280
50
220
530 60
0 ~845
*80-120
650
220
SET VIENNA
Washbasin
* = Effective height must be fixed according to the height of the pedestal.
4.2Z 0002
81003.5
Order no. 81003.5Certified to DIN EN 32Dimensions 650 x 550 mmSpecification 1 centre tap holeSpecial specification 3 tap holes Weight 16,5 kgAccessories excl. Syphon cover, order no. 81903.1
Pedestal, order no. 81903.0
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAMounting acc. excl. Mounting set, order no. 89988.2Colours see colour table
280
850
600
530
50
220
80-120
280
50
220
530 60
0 ~840
*
80-120
700
220
555
SET VIENNA
Washbasin
* = Effective height must be fixed according to the height of the pedestal.
4.3Z 0002
81003.7
Order no. 81003.7Certified to DIN EN 32Dimensions 700 x 555 mmSpecification 1 centre tap holeSpecial specification 3 tap holes Weight 18,0 kgAccessories excl. Syphon cover, order no. 81903.1
Pedestal, order no. 81903.0
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAMounting acc. excl. Mounting set, order no. 89988.2Colours see colour table
800
280
50
220
850
600
530
80-120
280
50
220
530 60
0 ~850
*80-120
220
565
SET VIENNA
Washbasin
* = Effective height must be fixed according to the height of the pedestal.
4.4Z 0002
81003.8
Order no. 81003.8Certified to DIN EN 32Dimensions 800 x 565 mmSpecification 1 centre tap holeSpecial specification 3 tap holes Weight 19,5 kgAccessories excl. Syphon cover, order no. 81903.1
Pedestal, order no. 81903.0
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAMounting acc. excl. Mounting set, order no. 89988.2Colours see colour table
Order no. 81903.1matching for Washbasins order no. 81003.4, 81003.5,
81003.7, 81003.8 Weight 6,0 kgMounting acc. incl. Device for fixing, order no. 89001.0Colours see colour table
Order no. 81903.0matching for Washbasins order no. 81003.4, 81003.5,
81003.7, 81003.8 Weight 7,0 kgColours see colour table
Syphon cover81903.1
Pedestal81903.0
TECHNICAL DATA / SYPHON COVER TECHNICAL DATA / PEDESTAL
SET VIENNA
4.5Z 0002
800
200
300
480
650*
300
45
80-120
50
190
530 60
0
850
280
max.775 max.295
Order no. 81347.8Certified to DIN EN 32Dimensions 800 x 480 mmSpecification 1 centre tap hole
cutable to 650 mm, with2 side cover to 680 mm
Special specification 3 tap holes Weight 13,5 kgAccessories excl. Syphon cover, order no. 81947.1Accessories excl. Side cover for cut surface
left, order no. 87340.3right, order no. 87340.4
4.6Z 0002
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
Countertop basin / cutable VARIA
81347.8
SET VIENNA
* = minimum measure for cutting
Mounting acc. excl. Mounting set, order no. 89988.2Otherwise When ordering the cut version, state total
overall measurement of washbasin (use the order form for cutting)
Colours see colour table
SET VIENNA
Order no. 81947.1matching for Washbasin order no. 81347.8 Weight 9,0 kg
Syphon cover81947.1
TECHNICAL DATA
4.7Z 0002
Mounting acc. incl. Device for fixing, order no. 89175.5Colours see colour table
1000
30021
5
550
800*
80-120
50
225
850
600
530
45
280
300
max.975 max.295
4.8Z 0002
81347.9
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
SET VIENNA
Countertop basin / cutable VARIA
* = minimum measure for cutting
Order no. 81347.9Certified to DIN EN 32Dimensions 1000 x 550 mmSpecification 1 centre tap hole
cutable to 800 mm, with2 side cover to 830 mm
Special specification 3 tap holes Weight 19,0 kgAccessories excl. Syphon cover, order no. 81947.9Accessories excl. Side cover for cut surface
left, order no. 87340.3right, order no. 87340.4
Mounting acc. excl. Mounting set, order no. 89988.2Otherwise When ordering the cut version, state total
overall measurement of washbasin (use the order form for cutting)
Colours see colour table
SET VIENNA
Order no. 81947.9matching for Washbasin order no. 81347.9 Weight 9,0 kg
Syphon cover81947.9
TECHNICAL DATA
4.9Z 0002
Mounting acc. incl. Device for fixing, order no. 89175.5Colours see colour table
4.10
300
570
1300
200
300
500
570 455
45
855
50
80-120
530 60
0 850
180
1150*
max.1275 max.295
Z 0002
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
81341.9
SET VIENNA
Order no. 81341.9Certified to DIN EN 32Dimensions 1300 x 500 mmSpecification per basin 1 centre tap hole
cutable to 1150 mm, with2 side cover to 1180 mm
Special specification per basin 3 tap holes Weight 26,6 kgAccessories excl. Side cover for cut surface
left, order no. 87340.3right, order no. 87340.4
* = minimum measure for cutting
Countertop double basin / cutable VARIA DUE
Mounting acc. excl. Mounting set, order no. 89988.2Otherwise When ordering the cut version, state total
overall measurement of washbasin (use the order form for cutting)
Colours see colour table
TECHNICAL DATA / SIDE COVER LEFTOrder no. 87340.3matching for Washbasins order no. 81341.9, 81347.8,
81347.9 Weight 0,3 kgOtherwise factory fitted end piecesColours see colour table
TECHNICAL DATA / SIDE COVER RIGHTOrder no. 87340.4matching for Washbasins order no. 81341.9, 81347.8,
81347.9 Weight 0,3 kgOtherwise factory fitted end piecesColours see colour table
Side cover left87340.3
Side cover right87340.4
SET VIENNA
4.11Z 0002
4.12
555
80-120
850
530 60
016
515
180
430
Z 0002
Order no. 81141.1Dimensions 555 x 430 mmSpecification 1 centre tap holeSpecial specification 3 tap holes Weight 7,2 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
Drop in basin81141.1
SET VIENNA
Mounting acc. incl. Template, order no. 89744.7Mounting acc. excl. Mounting set, order no. 89909.0Colours see colour table
4.13
630
210
510
80-120
2018
0
850
600
530
Z 0002
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
Drop in basin81141.2
SET VIENNA
Order no. 81141.2Dimensions 630 x 510 mmSpecification 1 centre tap holeSpecial specification 3 tap holes Weight 10,0 kg
Mounting acc. incl. Template, order no. 89744.8Mounting acc. excl. Mounting set, order no. 89909.0Colours see colour table
SET VIENNA
Semi recessed basin
4.14
555
25518
0
455
25
255
2585
0
20
85080-120
175
600
530
Z 0002
Order no. 81140.3Dimensions 555 x 455 mmSpecification 1 centre tap holeSpecial specification 3 tap holes Weight 10,0 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
81140.3
Mounting acc. incl. Template, order no. 89140.3Mounting set, order no. 89909.0
Colours see colour table
SET VIENNA
Semi recessed basin
650
25
280
2585
0
20
530
85080-120
210
600
200
540
280
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
4.15Z 0002
81140.5
Order no. 81140.5Dimensions 650 x 540 mmSpecification 1 centre tap holeSpecial specification 3 tap holes Weight 12,0 kg
Mounting acc. incl. Template, order no. 89140.5Mounting set, order no. 89909.0
Colours see colour table
SET VIENNA
Fixing set89909.0
2
3
4
6
1
5
1. Vanity basin2. Worktop3. Fixing part4. Adjusting screw5. Hexagonal screw with plug6. Silicon caoutchouc
DESCRIPTIONOrder no. 89909.0matching for Drop in basins order no. 81141.1, 81141.2
Semi recessed basins order no. 81140.3, 81140.5
TECHNICAL DATA
4.16Z 0002
SET VIENNA
Small washbasin
4.17
500
160
350
80-120
850
650
580
280
35
155
Z 0002
81530.4
Order no. 81530.4Certified to DIN EN 111Dimensions 500 x 350 mmSpecification 1 centre tap holeWeight 7,0 kgAccessories excl. Syphon cover, order no. 81903.3
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAMounting acc. excl. Mounting set, order no. 89988.2Colours see colour table
SET VIENNA
Syphon cover81903.3
Order no. 81903.3matching for Small washbasin order no. 81530.4 Weight 5,5 kg
TECHNICAL DATA
4.18Z 0002
Mounting acc. incl. Device for fixing, order no. 89001.0Colours see colour table
SET VIENNA
Floorstanding WC combination
4.19
390 185
70-300
260360
700
845
750
180 39
050
Z 0002
82159.9
Order no. 82159.9Certified to EN 997, EN 33Specification Washdown for 6-l-flushOutlet horizontal
VARIO, vertical 70 - 300 mmWeight 30,0 kgAccessories excl. Cistern, order no. 82647.0, 82759.0, 82759.3
Seat and cover, order no. 89247.0
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAMounting acc. excl. for VARIO-outlet 70 - 220 mm LAUFEN-
connection, order no. 89009.2 for VARIO-outlet 220 - 300 mm only LAUFEN-connection, order no. 89902.5
Colours see colour table
360
700
185
450
50
185
260
70-300
390
825 90
5
Order no. 82045.9Certified to EN 997, EN 33Specification Washdown for 6-l-flushOutlet horizontal
VARIO, vertical 70 - 300 mmWeight 30,0 kgAccessories excl. Cistern, order no. 82647.0, 82759.0, 82759.3
Seat and cover, order no. 89247.0
SET VIENNA
Floorstanding WC combination
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
4.20Z 0002
COMFORT82045.9
Mounting acc. incl. Device for fixing, order no. 89175.5 Mounting acc. excl. for VARIO-outlet 70 - 220 mm LAUFEN-
connection, order no. 89009.2 for VARIO-outlet 220 - 300 mm only LAUFEN-connection, order no. 89902.5
Colours see colour table
SET VIENNA
Cistern82647.0
TECHNICAL DRAWINGS / S 1 : 20
60
185
325
390
325 40
5
Order no. 82647.0Certified to DIN 19542matching for Floorstanding WC pan order no. 82045.9,
82159.9Specification Flushing mechanisme GEBERIT
water condensation insulationDual-Flush (3/6-l-flush)
Water inlet side or rearWeight 12,5 kg
TECHNICAL DATA
4.21Z 0002
Mounting acc. excl. Corner valve for water inletColours see colour table
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
4.22Z 0002
SET VIENNA
60
185
325
390
325 40
5
Cistern
Order no. 82759.0Certified to DIN 19542matching for Floorstanding WC pan order no. 82045.9,
82159.9Specification Flushing mechanisme DAL
water condensation insulationFlush can be interrupted by pressing twice
Water inlet side or rearWeight 12,5 kg
82759.0
Mounting acc. excl. Corner valve for water inletColours see colour table
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
4.23Z 0002
SET VIENNA40
120 185390
405
Cistern
Order no. 82759.3Certified to DIN 19542matching for Floorstanding WC pan order no. 82045.9,
82159.9Specification Flushing mechanisme DAL
Flush can be interrupted by pressing twiceWater inlet bottomWeight 12,5 kg
82759.3
Mounting acc. excl. Corner valve for water inletColours see colour table
Order no. 82156.1Certified to EN 997, EN 37Specification Washdown for 6-l-flushOutlet horizontal
verticalWeight 20,5 kgAccessories excl. Seat and cover, order no. 89247.0
570
360 70
125
50
350
390
190
65
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
4.24Z 0002
SET VIENNA
Floorstanding WC pan82156.1
Mounting acc. excl. for horizontal outlet use standard variable connection for outlet vertical LAUFEN-connection, order no. 89009.2
Colours see colour table
SET VIENNA
Wallhung WC pan
4.25
360
570
180
135
225
100
20
400
50
40
65
Z 0002
82158.0
Order no. 82158.0Certified to EN 997, EN 38Specification Washdown for 6-l-flushWeight 17,0 kgAccessories excl. Seat and cover, order no. 89247.0
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
Colours see colour table
360
570
90
40
450
50
20
225
135
100
180
Order no. 82347.0Certified to EN 997, EN 38Specification Washdown for 6-l-flushWeight 17,0 kgAccessories excl. Seat and cover, order no. 89247.0
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
4.26Z 0002
SET VIENNA
Wallhung WC panCOMFORT
82347.0
Colours see colour table
SET VIENNA
Seat and cover89247.0
Order no. 89247.0matching for Floorstanding WC pan order no. 82045.9,
82156.1, 82159.9Wallhung WC pan order no. 82158.0, 82347.0
Specification Snap catch for easy removalWeight 4,0 kg
TECHNICAL DATA
4.27Z 0002
Mounting acc. includedColours see colour table
SET VIENNA
Floorstanding bidet
4.28
390
100
570
150360 270
50
180
5
Z 0002
83059.1
Order no. 83059.1Specification 1 centre tap holeWeight 17,0 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAColours see colour table
360
570
50
270
270150
480
100
Order no. 83047.1Specification 1 centre tap holeWeight 19,0 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
4.29Z 0002
SET VIENNA
Floorstanding bidetCOMFORT
83047.1
Mounting acc. incl. Device for fixing, order no. 89175.5Colours see colour table
SET VIENNA
Wallhung bidet
4.30
360
570
300
325
180
100
120
45
65
450
210
225
40
Z 0002
83159.1
Order no. 83159.1Specification 1 centre tap holeWeight 15,5 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
Colours see colour table
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
4.31Z 0002
SET VIENNA
Wallhung bidetCOMFORT
83147.1
360
570
40
90290
225
500
7
150*/300**
325
120
100
180
Order no. 83147.1Specification 1 centre tap holeWeight 17,5 kg
Colours see colour table
* = corner valve inside / ** = corner valve outside
S E T G A L L E RY
SET GALLERY
* = Effective height must be fixed according to the height of the pedestal.
5.1
550
225
460
80-120
160
280
5053
0 600 ~8
10*80-120
160
280
5053
0 600
850
Z 0002
Washbasin81017.1
Order no. 81017.1Certified to DIN EN 32Dimensions 550 x 460 mmSpecification 1 centre tap holeWeight 12,0 kgAccessories excl. Syphon cover, order no. 81917.2
Pedestal, order no. 81917.0
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAMounting acc. excl. Mounting set, order no. 89988.2Colours see colour table
SET GALLERY
* = Effective height must be fixed according to the height of the pedestal.
5.2
500
600
245
80-120
50
180
~830
*
600
530
280
80-120
50
180
850
600
530
280
Z 0002
Washbasin81017.2
Order no. 81017.2Certified to DIN EN 32Dimensions 600 x 500 mmSpecification 1 centre tap holeWeight 15,0 kgAccessories excl. Syphon cover, order no. 81917.2
Pedestal, order no. 81917.0
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAMounting acc. excl. Mounting set, order no. 89988.2Colours see colour table
SET GALLERY
* = Effective height must be fixed according to the height of the pedestal.
5.3
650
530
245
80-120
530
280
50
190
600 ~8
40*
280
530
50
190
600
85080-120
Z 0002
Washbasin81017.4
Order no. 81017.4Certified to DIN EN 32Dimensions 650 x 530 mmSpecification 1 centre tap holeWeight 16,5 kgAccessories excl. Syphon cover, order no. 81917.2
Pedestal, order no. 81917.0
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAMounting acc. excl. Mounting set, order no. 89988.2Colours see colour table
SET GALLERY
* = Effective height must be fixed according to the height of the pedestal.
5.4
550
80-120
50
280
200
600
530
~850
*80-120
50
280
200
600
530
850
245
700
Z 0002
Washbasin81017.5
Order no. 81017.5Certified to DIN EN 32Dimensions 700 x 550 mmSpecification 1 centre tap holeSpecial specification 3 tap holesWeight 18,0 kgAccessories excl. Syphon cover, order no. 81917.2
Pedestal, order no. 81917.0
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAMounting acc. excl. Mounting set, order no. 89988.2Colours see colour table
280
850
190
45
27580-120
530 60
0
600
725
655
515280 275
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
5.5Z 0002
SET GALLERY
Washbasin for corner81416.5
Order no. 81416.5Certified to DIN EN 32 Dimensions 725 x 655 mmSpecification 1 centre tap holeWeight 12,5 kg
Mounting acc. excl. Mounting set, order no. 89988.2Colours see colour table
5.6
80-120
280
50
530 600
850
45
190
600
240
390
520
1020
355
max.990 max.345
630*
Z 0002
Countertop basin / cutable81417.6
Order no. 81417.6Certified to DIN EN 32Dimensions 1020 x 520 mmSpecification 1 centre tap hole
cutableSpecial options 3 tap holesWeight 18,0 kgAccessories excl. Syphon cover, order no. 81917.2
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
SET GALLERY
* = minimum measure for cutting
Mounting acc. excl. Mounting set, order no. 89988.2Otherwise When ordering the cut version, state total
overall measurement of washbasin (use the order form for cutting)
Colours see colour table
5.7
855
1350
640
240
600
390
520
35580-120
190
455 45
530
600
850
50
max.1320 max.345
640
Z 0002
Countertop double basin81417.8
Order no. 81417.8Certified to DIN EN 32Dimensions 1350 x 520 mmSpecification per basin 1 centre tap holeSpecial specification per basin 3 tap holesWeight 30,5 kgAccessories excl. Syphon cover, order no. 81917.2
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
SET GALLERY
Mounting acc. excl. Mounting set, order no. 89988.2Colours see colour table
Order no. 81917.2matching for Washbasins order no. 81017.1, 81017.2,
81017.4, 81017.5, 81417.6, 81417.8 Weight 6,5 kgMounting acc. incl. Device for fixing, order no. 89001.2Colours see colour table
Order no. 81917.0matching for Washbasins order no. 81017.1, 81017.2,
81017.4, 81017.5 Weight 7,0 kgColours see colour table
Syphon cover81917.2
Pedestal81917.0
TECHNICAL DATA / SYPHON COVER TECHNICAL DATA / PEDESTAL
SET GALLERY
5.8Z 0002
SET GALLERY
5.9
650
195
280
530
195
26020
80-120
20
600
850
530
Z 0002
Semi recessed basin81317.4
Order no. 81317.4Dimensions 650 x 530 mmSpecification 1 centre tap holeSpecial specification 3 tap holesWeight 14,5 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAMounting acc. incl. Template, order no. 89140.5
Mounting set, order no. 89909.0Colours see colour table
SET GALLERY
Fixing set89909.0
2
3
4
6
1
5
1. Vanity basin2. Worktop3. Fixing part4. Adjusting screw5. Hexagonal screw with plug6. Silicon caoutchouc
DESCRIPTIONOrder no. 89909.0matching for Semi recessed basin order no. 81317.4
TECHNICAL DATA
5.10Z 0002
SET GALLERY
5.11
190
380
470
80
155
180
4558
0 650
850
Z 0002
Small washbasin81517.2
Order no. 81517.2Certified to DIN EN 111Dimensions 470 x 380 mmSpecification 1 centre tap holeWeight 8,5 kgAccessories excl. Syphon cover, order no. 81917.5
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAMounting acc. excl. Mounting set, order no. 89988.2Colours see colour table
SET GALLERY
Syphon cover81917.5
Order no. 81917.5matching for Small washbasin order no. 81517.2 Weight 5,0 kg
TECHNICAL DATA
5.12Z 0002
Mounting acc. incl. Device for fixing, order no. 89001.0Colours see colour table
180
850
155
40
19580-120
580
650
470
490
470
350180 195
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
5.13Z 0002
SET GALLERY
Small washbasin for corner81616.5
Order no. 81616.5Certified to DIN EN 32Dimensions 490 x 470 mmSpecification 1 centre tap holeWeight 9,4 kg
Mounting acc. excl. Mounting set, order no. 89988.2Colours see colour table
SET GALLERY
5.14
720
360
1540
0
70-300
260
185
185390
750 825
Z 0002
Floorstanding WC combination82117.9
Order no. 82117.9Certified to EN 997, EN 33Specification Washdown for 6-l-flushOutlet horizontal
VARIO vertical 70 - 300 cmWeight 24,0 kgAccessories excl. Cistern, order no. 82717.0
Seat and cover, order no. 89517.1
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAMounting acc. excl. for VARIO-outlet 70 - 220 mm LAUFEN-
connection, order no. 89009.2 for VARIO-outlet 220 - 300 mm only LAUFEN-connection, order no. 89902.5
Colours see colour table
Cistern82717.0
SET GALLERY
TECHNICAL DRAWINGS / S 1 : 20
390
335 41
0
185
315
90
Order no. 82717.0Certified to DIN 19542matching for Floorstanding WC pan order no. 82117.9
Wallhung WC pan order no. 82007.1Specification Flushing mechanisme GEBERIT
water condensation insulationDual-Flush (3/6-l-flush)
Water inlet side or rearWeight 12,5 kg
TECHNICAL DATA
5.15Z 0002
Mounting acc. excl. Corner valve for water inletColours see colour table
SET GALLERY
5.16
360
580
400
350
185
95
125
70
Z 0002
Floorstanding WC pan82417.1
Order no. 82417.1Certified to EN 997, EN 37Specification Washdown for 6-l-flushOutlet horizontal
vertical 70 mmWeight 17,5 kgAccessories excl. Seat and cover, order no. 89517.1
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAMounting acc. excl. Special elbow for vertical connection 70 mm,
order no. 89009.2Colours see colour table
SET GALLERY
5.17
700
360
390
825
750
180
225
100
400
185
15
55 100
40
Z 0002
Wallhung WC combination82007.1
Order no. 82007.1Certified to EN 997, EN 34Specification Washdown for 6-l-flushWeight 24,0 kgAccessories excl. Cistern, order no. 82717.0
Seat and cover, order no. 89517.1
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAColours see colour table
SET GALLERY
5.18
40
360
550
180
135
100
225 60
20
400
Z 0002
Wallhung WC pan82017.0
Order no. 82017.0Certified to EN 997, EN 38Specification Washdown for 6-l-flushWeight 16,0 kgAccessories excl. Seat and cover, order no. 89517.1
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
Colours see colour table
SET GALLERY
Seat and cover89517.1
Order no. 89517.1matching for Floorstanding WC pan order no. 82117.9,
82417.1Wallhung WC pan order no. 82007.1, 82017.0
Specification removableWeight 2,5 kg
TECHNICAL DATA
5.19Z 0002
Mounting set includedColours see colour table
SET GALLERY
5.20
360
580
150
400
100
280
210
50
Z 0002
Floorstanding bidet83117.1
Order no. 83117.1Specification 1 centre tap holeWeight 18,0 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAColours see colour table
SET GALLERY
5.21
360
550
180
325
120
100
300
400
205
60
40
230
Z 0002
Wallhung bidet83017.1
Order no. 83017.1Specification 1 centre tap holeWeight 15,0 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
Colours see colour table
S E T S W I N G
540
430
185
280
530 60
0
850
60
185
80
600
280
185
530
~830
*
60
80-120
SET SWING
Washbasin
* = Effective height must be fixed according to the height of the pedestal.
6.1Z 0002
81040.1
Order no. 81040.1Certified to DIN EN 32Dimensions 540 x 430 mmSpecification 1 centre tap holeSpecial specification 3 tap holes Weight 11,0 kgAccessories excl. Syphon cover, order no. 81950.3
Pedestal, order no. 81940.0
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAMounting acc. excl. Mounting set, order no. 89988.2Colours see colour table
Syphon cover81950.3
Pedestal81940.0
SET SWING
Order no. 81950.3matching for Washbasin order no. 81040.1Weight 5,0 kgMounting acc. incl. Device for fixing, order no. 89001.0 Colours see colour table
Order no. 81940.0matching for Washbasins order no. 81040.1, 81040.2,
81040.4 Weight 6,5 kgColours see colour table
TECHNICAL DATA / SYPHON COVER TECHNICAL DATA / PEDESTAL
6.2Z 0002
620
220
510
280
60
80
195
530 60
0
850 80-120
60
195
600
530
~845
*
280
SET SWING
Washbasin
* = Effective height must be fixed according to the height of the pedestal.
6.3Z 0002
81040.2
Order no. 81040.2Certified to DIN EN 32Dimensions 620 x 510 mmSpecification 1 centre tap holeSpecial specification 3 tap holes Weight 15,0 kgAccessories excl. Syphon cover, order no. 81950.1
Pedestal, order no. 81940.0
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAMounting acc. excl. Mounting set, order no. 89988.2Colours see colour table
660
230
560
280
60
80
210
600
530
850 80-120
~860
*
280
60
210
600
530
SET SWING
Washbasin
* = Effective height must be fixed according to the height of the pedestal.
6.4Z 0002
81040.4
Order no. 81040.4Certified to DIN EN 32Dimensions 660 x 560 mmSpecification 1 centre tap holeSpecial specification 3 tap holes Weight 18,0 kgAccessories excl. Syphon cover, order no. 81950.1
Pedestal, order no. 81940.0
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAMounting acc. excl. Mounting set, order no. 89988.2Colours see colour table
SET SWING
Syphon cover81950.1
Pedestal81940.0
Order no. 81950.1matching for Washbasins order no. 81040.2, 81040.4Weight 6,0 kgMounting acc. incl. Device for fixing, order no. 89001.0Colours see colour table
Order no. 81940.0matching for Washbasins order no. 81040.1, 81040.2,
81040.4 Weight 6,5 kgColours see colour table
TECHNICAL DATA / SYPHON COVER TECHNICAL DATA / PEDESTAL
6.5Z 0002
555
180
460
80-120
25
200
850
600
530
20 240
260
SET SWING
Semi recessed basin
6.6Z 0002
Order no. 81041.1Dimensions 555 x 460 mmSpecification 1 centre tap holeSpecial specification 3 tap holes Weight 10,0 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
81041.1
Mounting acc. incl. Template, order no. 89140.1Mounting set, order no. 89060.2
Colours see colour table
SET SWING
Fixing set89060.2
4
3
1
2
1. Vanity basin2. Worktop3. Fixing part4. Silicon caoutchouc
DESCRIPTIONOrder no. 89060.2matching for Semi recessed basins order no. 81041.1
TECHNICAL DATA
6.7Z 0002
655
195
555
80-120
25
210
850
600
530
25 255
280
SET SWING
Semi recessed basin
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
6.8Z 0002
81240.4
Order no. 81240.4Dimensions 655 x 555 mmSpecification 1 centre tap holeSpecial specification 3 tap holes Weight 12,0 kg
Mounting acc. incl. Template, order no. 89140.5Mounting set, order no. 89909.0
Colours see colour table
SET SWING
TECHNICAL DATA DESCRIPTION
Fixing set89909.0
2
3
4
6
1
5
1. Vanity basin2. Worktop3. Fixing part4. Adjusting screw5. Hexagonal screw with plug6. Silicon caoutchouc
Order no. 89909.0matching for Semi recessed basin order no. 81240.4
6.9Z 0002
480
165
360
200
850
80
650
580
165
50
SET SWING
Small washbasin
6.10Z 0002
81540.0
Order no. 81540.0Certified to DIN EN 111Dimensions 480 x 360 mmSpecification 1 centre tap holeWeight 8,0 kgAccessories excl. Syphon cover, order no. 81950.5
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAMounting acc. excl. Mounting set, order no. 89988.2Colours see colour table
SET SWING
Syphon cover81950.5
Order no. 81950.5matching for Small washbasin order no. 81540.0 Weight 5,0 kg
TECHNICAL DATA
6.11Z 0002
Mounting acc. incl. Device for fixing, order no. 89001.0Colours see colour table
360
710
375
800
750
260
390
20
195
70-300
180
SET SWING
Floorstanding WC combination
6.12Z 0002
82340.1
Order no. 82340.1Certified to EN 977, EN 33 Specification Washdown for 6-l-flushOutlet horizontal
VARIO, vertical 70 - 300 mmWeight 12,0 kgAccessories excl. Cistern, order no. 82740.0, 82740.3, 82840.0
Seat and cover, order no. 89340.0
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAMounting acc. excl. for VARIO-outlet 70 - 220 mm LAUFEN-
connection, order no. 89009.2for VARIO-outlet 220 - 300 mm only LAUFEN-connection, order no. 89902.5
Colours see colour table
375
390
280
195
320
80
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
6.13Z 0002
SET SWING
Cistern
Order no. 82740.0Certified to DIN 19542 matching for Floorstanding WC pan order no. 82340.1
Wallhung WC pan order no. 82140.1Specification Flushing mechanisme DAL
water condensation insulationFlush can be interrupted by pressing twice
Water inlet side or rear Weight 16,0 kg
82740.0
Mounting acc. excl. Corner valve for water inletColours see colour table
375
395
19587,5
35
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
6.14Z 0002
SET SWING
Cistern
Order no. 82740.3Certified to DIN 19542 matching for Floorstanding WC pan order no. 82340.1Specification Flushing mechanisme DAL
Flush can be interrupted by pressing twiceWater inlet bottom Weight 16,0 kg
82740.3
Colours see colour table
375
390
280
195
320
80
SET SWING
Cistern
Order no. 82840.0Certified to DIN 19542matching for Floorstanding WC pan order no. 82340.1
Wallhung WC pan order no. 82140.1Specification Flushing mechanisme GEBERIT
water condensation insulationDual-Flush (3/6-l-flush)
Water inlet side or rear Weight 16,0 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
6.15Z 0002
82840.0
Mounting acc. excl. Corner valve for water inletColours see colour table
SET SWING
Floorstanding WC
6.16
360
580
395
95
350
185
70
125
Z 0002
82341.1
Order no. 82341.1Certified to EN 977, EN 37Specification Washdown for 6-l-flushOutlet horizontal
vertical 70 mm Weight 17,5 kgAccessories excl. Seat and cover, order no. 89340.0
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAMounting acc. excl. for horizontal outlet use standard variable
connection for outlet vertical 70 mm LAUFEN-connection, order no. 89009.2
Colours see colour table
Order no. 82140.1Certified to EN 977, EN 34 Specification Washdown for 6-l-flushWeight 20,0 kgAccessories excl. Cistern, order no. 82740.0 82840.0
Seat and cover, order no. 89340.0
360
690
375
100
180
225
750 82
0
25
400
30
50
40
195
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
6.17Z 0002
SET SWING
Wallhung WC combination82140.1
Colours see colour table
SET SWING
Wallhung WC pan
6.18
360
540
180
100
135
225
40
1540
0
60
20
Z 0002
82040.5
Order no. 82040.5Certified to EN 977, EN 38Specification Washdown for 6-l-flushWeight 14,0 kgAccessories excl. Seat and cover, order no. 89340.0
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAMounting acc. excl. Water outlet and inlet connection
Bolt caps chrome, order no. 89263.0Steel support, order no. 89900.0Steel support, UK-Version, order no. 89900.1Kombifix LIV, order no. 89380.0Cover plate Kombifix, order no. 89380.4
Colours see colour table
SET SWING
Seat and cover89340.0
Order no. 89340.0matching for Floorstanding WC pan order no. 82340.1,
82341.1Wallhung WC pan order no. 82140.1, 82040.5
Specification removableWeight 2,8 kg
TECHNICAL DATA
6.19Z 0002
Mounting set includedColours see colour table
SET SWING
Floorstanding bidet
6.20
360
580
395
255
200
50
150
100
Z 0002
83340.1
Order no. 83340.1Specification 1 centre tap holeWeight 19,0 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
Colours see colour table
SET SWING
Floorstanding bidet
6.21
580
395
255
200
50
150
100
360
Z 0002
83340.3
Order no. 83340.3Specification 3 tap holesWeight 19,0 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
Colours see colour table
Order no. 83140.1Specification 1 centre tap holeWeight 15,0 kg
360
540
300 200
400
15
40
5520532
5
120
100
180
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
6.22Z 0002
SET SWING
Wallhung bidet83140.1
Mounting acc. excl. Steel support, order no. 89900.0Steel support, UK-Version, order no. 89900.1Bolt caps, order no. 89263.1
Colours see colour table
S E T L I B E R T Y L I N E
140
50
630*
600
830
280
300
190
800
190
550
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
8.1Z 0002
SPECIAL ARTICLES
Washbasin for handicappedLIBERTYLINE
81147.8
Order no. 81147.8Certified to DIN 18024/18025, EN 32Dimensions 800 x 550 mmSpecification 1 centre tap hole
without overflowSpecial specification without tap holeWeight 16,0 kg
* = 550 mm by using run off and overflow system Clou
Mounting acc. excl. Run off and overflow system Clou GEBERIT, order no. 89194.1Mounting set, order no. 89988.2
Colours see colour table
360
700
90
90
450
50
40
225
135
100
180
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
8.2Z 0002
SPECIAL ARTICLES
Wallhung WC pan for handicappedLIBERTYLINE
82147.0
Order no. 82147.0Certified to DIN 18024/18025, EN 997, EN 38Specification Washdown for 6-l-flush, lenght 700 mmWeight 23,5 kgAccessories excl. WC seat and cover, order no. 89247.0
WC seat, order no. 89147.0
Mounting acc. excl. Water outlet and inlet connectionBolt caps chrome, order no. 89263.0Steel support, order no. 89900.0Steel support, UK-Version, order no. 89900.1Kombifix LIV, order no. 89380.0Cover plate Kombifix, order no. 89380.4
Colours see colour table
SPECIAL ARTICLES
Seat and cover LIBERTYLINE89247.0
Seat LIBERTYLINE89147.0
Order no. 89147.0matching for Wallhung WC pan order no. 82147.0Specification snap catch for easy removalWeight 3,0 kgMounting acc. includedColours see colour table
TECHNICAL DATA / SEAT AND COVEROrder no. 89247.0matching for Wallhung WC pan order no. 82147.0Specification snap catch for easy removalWeight 4,0 kgMounting acc. includedColours see colour table
TECHNICAL DATA / SEAT
8.3Z 0002
VA N I T Y B A S I N S
C O U N T E R T O PB A S I N S / C U TA B L E
9.1
800
200
530
80-120
15
455
280
235
40
530
580
850
max.680 max.460
Z 0002
Countertop basinOREGON
81149.8
Order no. 81149.8Certified to DIN EN 32Dimensions 800 x 530 mmSpecification 1 centre tap hole
anti-splash rimSpecial specification 3 tap holes Weight 23,0 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
Mounting acc. excl. Mounting set, order no. 89988.2Colours see colour table
9.2
1000
200
530
80-120
15
455
280
235
40
530
580
850
max.900 max.460
Z 0002
Countertop basinOREGON
81149.0
Order no. 81149.0Certified to DIN EN 32Dimensions 1000 x 530 mmSpecification 1 centre tap hole
anti-splash rimSpecial specification 3 tap holes Weight 29,3 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
Mounting acc. excl. Mounting set, order no. 89988.2Colours see colour table
9.3
1300
200
550
670
80-120
50 1523
5
530
600
850
455
855
670
max.460max.1195
Z 0002
Double countertop basinOREGON DUE
81149.9
Order no. 81149.9Certified to DIN EN 32Dimensions 1300 x 550 mmSpecification per basin 1 centre tap hole
anti-splash rimSpecial specification per basin 3 tap holes Weight 39,0 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
Mounting acc. excl. Mounting set, order no. 89988.2Colours see colour table
9.4
205
1200
550
855455
80-120
150
5019
053
0 600
850
800*
315
max.1170 max.295
330
Z 0002
Countertop basin / cutablePALACE81250.3
Order no. 81250.3Certified to DIN EN 32Dimensions 1200 x 550 mmSpecification 1 centre tap hole
cutable to 800 mm, with2 side cover to 830 mm
Special specification 3 tap holes Weight 40,0 kgAccessories excl. Side cover for cut surface
left, order no. 87312.1right, order no. 87312.2
Mounting acc. excl. Mounting set, order no. 89988.2Otherwise When ordering the cut version, state total
overall measurement of washbasin (use the order form for cutting)
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
* = minimum measure for cutting
9.5
1500
530
190
855
455
150
5060
0
85080-120
205
550
800*
315
max.1470 max.295
330
Z 0002
Countertop basin / cutablePALACE81250.5
Order no. 81250.5Certified to DIN EN 32Dimensions 1500 x 550 mmSpecification 1 centre tap hole
cutable to 800 mm, with2 side cover to 830 mm
Special specification 3 tap holes Weight 42,0 kgAccessories excl. Side cover for cut surface
left, order no. 87312.1right, order no. 87312.2
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
* = minimum measure for cutting
Mounting acc. excl. Mounting set, order no. 89988.2Otherwise When ordering the cut version, state total
overall measurement of washbasin (use the order form for cutting)
Colours see colour table
9.6
205
1800
550
855
455
150
50
530
600
850
1355
80-120
190
800*
315
max.1770 max.295
330
Z 0002
Countertop basin / cutablePALACE81250.6
Order no. 81250.6Certified to DIN EN 32Dimensions 1800 x 550 mmSpecification 1 centre tap hole
cutable to 800 mm, with2 side cover to 830 mm
Special specification 3 tap holes Weight 44,0 kgAccessories excl. Side cover for cut surface
left, order no. 87312.1right, order no. 87312.2
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
* = minimum measure for cutting
Mounting acc. excl. Mounting set, order no. 89988.2Otherwise When ordering the cut version, state total
overall measurement of washbasin (use the order form for cutting)
Colours see colour table
9.7
550
205
1200
800* 855455
80-120
150
5019
053
0 600
850
315
max.1170 max.295
330
Z 0002
Countertop basin / cutablePALACE81251.3
Order no. 81251.3Certified to DIN EN 32Dimensions 1200 x 550 mmSpecification 1 centre tap hole
incl. towel railcutable to 800 mm, with2 side cover to 830 mm
Special specification 3 tap holes Weight 40,0 kgAccessories excl. Side cover for cut surface
left, order no. 87312.1right, order no. 87312.2
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
* = minimum measure for cutting
Mounting acc. excl. Mounting set, order no. 89988.2Otherwise When ordering the cut version, state total
overall measurement of washbasin (use the order form for cutting)
Colours see colour table
9.8
1500
530
190
855
455
150
5060
0
85080-120
205
550
800*
315
max.1470 max.295
330
Z 0002
Countertop basin / cutablePALACE81251.5
Order no. 81251.5Certified to DIN EN 32Dimensions 1500 x 550 mmSpecification 1 centre tap hole
incl. towel railcutable to 800 mm, with2 side cover to 830 mm
Special specification 3 tap holes Weight 42,0 kgAccessories excl. Side cover for cut surface
left, order no. 87312.1right, order no. 87312.2
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
* = minimum measure for cutting
Mounting acc. excl. Mounting set, order no. 89988.2Otherwise When ordering the cut version, state total
overall measurement of washbasin (use the order form for cutting)
Colours see colour table
9.9
205
1800
550
855
455
150
50
530
600
850
1355
80-120
190
800*
315
max.1770 max.295
330
Z 0002
Countertop basin / cutablePALACE81251.6
Order no. 81251.6Certified to DIN EN 32Dimensions 1800 x 550 mmSpecification 1 centre tap hole
incl. towel railcutable to 800 mm, with2 side cover to 830 mm
Special specification 3 tap holes Weight 44,0 kgAccessories excl. Side cover for cut surface
left, order no. 87312.1right, order no. 87312.2
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
* = minimum measure for cutting
Mounting acc. excl. Mounting set, order no. 89988.2Otherwise When ordering the cut version, state total
overall measurement of washbasin (use the order form for cutting)
Colours see colour table
9.10
210
1500
330
570
185
855
455360
440
150
50
530
600
85080-120
max.1470
315
max.295
1350*
Z 0002
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
Countertop double basin / cutablePALACE DUE
81260.5
Order no. 81260.5Certified to DIN EN 32 Dimensions 1500 x 570 mmSpecification per basin 1 centre tap hole
cutable to 1350 mm, with2 side cover to 1380 mm
Special specification per basin 3 tap holes Weight 41,0 kgAccessories excl. Side cover for cut surface
left, order no. 87312.1right, order no. 87312.2
* = minimum measure for cutting
Mounting acc. excl. Mounting set, order no. 89988.2Otherwise When ordering the cut version, state total
overall measurement of washbasin (use the order form for cutting)
Colours see colour table
9.11
210
1800
330
570
185
855455
150
50
530
600
850
1355
80-120
max.1770
315
max.295
1350*
440
360
Z 0002
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
Countertop double basin / cutablePALACE DUE
81260.6
Order no. 81260.6Certified to DIN EN 32 Dimensions 1800 x 570 mmSpecification per basin 1 centre tap hole
cutable to 1350 mm, with2 side cover to 1380 mm
Special specification per basin 3 tap holes Weight 43,0 kgAccessories excl. Side cover for cut surface
left, order no. 87312.1right, order no. 87312.2
* = minimum measure for cutting
Mounting acc. excl. Mounting set, order no. 89988.2Otherwise When ordering the cut version, state total
overall measurement of washbasin (use the order form for cutting)
Colours see colour table
9.12
210
1500
330
570
185
150
50
530
600
85080-120
max.1470
315
max.295
1350* 855
455
440
360
Z 0002
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
Countertop double basin / cutablePALACE DUE
81261.5
Order no. 81261.5Certified to DIN EN 32 Dimensions 1500 x 570 mmSpecification per basin 1 centre tap hole
incl. towel railcutable to 1350 mm, with2 side cover to 1380 mm
Special specification per basin 3 tap holes Weight 41,0 kgAccessories excl. Side cover for cut surface
left, order no. 87312.1right, order no. 87312.2
* = minimum measure for cutting
Mounting acc. excl. Mounting set, order no. 89988.2Otherwise When ordering the cut version, state total
overall measurement of washbasin (use the order form for cutting)
Colours see colour table
9.13
210
1800
330
570
185
855455
150
50
530
600
850
1355
80-120
max.1770
315
max.295
1350*
440
360
Z 0002
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
Countertop double basin / cutablePALACE DUE
81261.6
Order no. 81261.6Certified to DIN EN 32 Dimensions 1800 x 570 mmSpecification per basin 1 centre tap hole
incl. towel railcutable to 1350 mm, with2 side cover to 1380 mm
Special specification per basin 3 tap holes Weight 43,0 kgAccessories excl. Side cover for cut surface
left, order no. 87312.1right, order no. 87312.2
* = minimum measure for cutting
Mounting acc. excl. Mounting set, order no. 89988.2Otherwise When ordering the cut version, state total
overall measurement of washbasin (use the order form for cutting)
Colours see colour table
We would like to order ______ piece(s)(Please use separate order form for each cut!)
symmetric cut, right angle
Colour ___________________________
Precise measurementsfor symmetric cuts
_______________ mm
81250.3 1200 mm
81250.5 1500 mm
81250.6 1800 mm
WashbasinsPalace
symmetric cut, diagonal
asymmetric cut, right angle
asymmetric cut, diagonal
right angled cut on one side
cut diagonally on one side
Right-angled cut
Precise measurementsfor symmetric cuts
Diagonal cut
B = __________ mm
F = __________ mm
81251.3 1200 mm
81251.5 1500 mm
81251.6 1800 mm
Precise measurementsfor asymmetric cuts
BL = __________ mm
FL = __________ mm
BR = __________ mm
FR = __________ mm
Precise measurementsfor asymmetric cuts
L = __________ mm
R = __________ mm
OBJECT: _____________________________________
FITTER: _______________________________________
ORDER NO. ____________________________________
WHOLESALER: __________________________________(or enclose order form)
F
B
FL FR
BL BR
L R
81260.5 1500 mm 81261.5 1500 mm
81260.6 1800 mm 81251.6 1800 mm
without end caps for cut surface
with end cap(s) (already affixed)
with 2 end caps (left and right)
___ end cap(s) left
___ end cap(s) right
Only right angled cuts are possible. In caseof deliveries with affixed end caps, the widthgiven by you is always inclusive of the endcaps.The uncut widths of the washbasins (1200,1500, 1800 mm) are the usual ceramictolerances.If exact widths for installation are required,there are also cuts for widths of 1200, 1500and 1800 mm necessary.Note additional price for cutting!We recommande the basins81250.6/81251.6 for cutting to 1500 mm,81260.6/81261.6 for cutting to 1500 mm,81250.5/81251.5 for cutting to 1200 mm,81260.5/81261.5 for cutting to 1200 mm,81250.3/81251.3 for cutting to 800 mm.
WT Palace81250.381250.581250.681260.581260.681251.381251.581251.681261.581261.6
800800800
13501350800800800
13501350
830830830
13801380830830830
13801380
815815815
13651365815815815
13651365
400400400675675400400400675675
400400400675675400400400675675
415415415690690415415415690690
415415415690690415415415690690
right min.with
end cap(mm)
left min.with
end cap(mm)
rightmin.
(mm)
leftmin.
(mm)
with 1end cap
(mm)
with 2end caps
(mm)
can becut up toa max.(mm)
M i n i m u m w e i d t h ssymmetric cut asymmetric cut
MAKE A COPY BEFORE FILLING OUT THE FORM! Mark the relevant box or give precise measurements
ATTENTION:
VANITY BASINS
Order form for variable cuts of washbasins
9.14Z 0002
9.15
920
220
310
500
280
40 50
80-120
530 60
0
850
195
305
max.895 max.300
500*
Z 0002
Countertop basin / cutableFIORA
81313.8
Order no. 81313.8Certified to DIN EN 32Dimensions 920 x 500 mmSpecification 1 centre tap hole
cutableWeight 20,0 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
* = minimum measure for cutting
Mounting acc. excl. Mounting set, order no. 89988.2Otherwise When ordering the cut version, state total
overall measurement of washbasin (use the order form for cutting)
Colours see colour table
We would like to order ______ piece(s)(Please use separate order form for each cut!)
symmetric cut, right angle
Colour ___________________________
Precise measurementsfor symmetric cut
_______________ mm
Washbasin Fiora
symmetric cut, diagonal
asymmetric cut, right angle
asymmetric cut, diagonal
right angle cut on one side
cut diagonally on one side
Right angled cut
Precise measurementsfor symmetric cut
Diagonal cut
B = __________ mm
F = __________ mm
Precise measurementsfor asymmetric cut
BL = __________ mm
FL = __________ mm
BR = __________ mm
FR = __________ mm
Precise measurementsfor asymmetric cut
L = __________ mm
R = __________ mm
OBJECT: _____________________________________
FITTER: _______________________________________
ORDER NO. ____________________________________
WHOLESALER: __________________________________(or enclose order form)
F
B
FL FR
BL BR
L R
There are no end caps for model 81313.8.The uncut width of the washbasin (920 mm) is the usualceramic tolerances.If exact width for installation is required, there is alsocut for width 920 necessary.
Note additional price for cutting!
Fiora81313.8 500 250 250
right min(mm)
left min(mm)
can be cut up to a max.(mm)
M i n i m u m w e i d t h ssymmetric cut asymmetric cut
81313.8 920 mm
MAKE A COPY BEFORE FILLING OUT THE FORM! Mark the relevant box or give precise measurements
ATTENTION:
VANITY BASINS
Order form for variable cuts of washbasins
9.16Z 0002
9.17
530
1220
220
600
310
500
455
50
855
50
80-120
195
600
850
305
max.1200 max.300
600
Z 0002
Countertop double basinFIORA DUE
81313.9
Order no. 81313.9Certified to DIN EN 32Dimensions 1220 x 500 mmSpecification per basin 1 centre tap holeWeight 25,0 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
Mounting acc. excl. Mounting set, order no. 89988.2Colours see colour table
9.18
670
200
365
510
280
45
80-120
50
190
530 60
0
850
max.635 max.340
345
Z 0001
Countertop washbasinSANO
81343.3
Order no. 81343.3Certified to DIN EN 32Dimensions 670 x 510 mmSpecification 1 centre tap holeSpecial specification 3 tap holes Weight 14,0 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
Mounting acc. excl. Mounting set, order no. 89988.2Colours see colour table
9.19
750
200
365
510
280
45
80-120
50
190
530 60
0
850
max.700 max.340
345
Z 0001
Countertop washbasinSANO
81343.4
Order no. 81343.4Certified to DIN EN 32Dimensions 750 x 510 mmSpecification 1 centre tap holeSpecial specification 3 tap holes Weight 15,5 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
Mounting acc. excl. Mounting set, order no. 89988.2Colours see colour table
9.20
max.340
345
max.810850
200
365
510
280
45
80-120
50
190
530 60
0
850
Z 0001
Countertop washbasinSANO
81343.5
Order no. 81343.5Certified to DIN EN 32Dimensions 850 x 510 mmSpecification 1 centre tap holeSpecial specification 3 tap holes Weight 16,5 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
Mounting acc. excl. Mounting set, order no. 89988.2Colours see colour table
9.21
max.340
345
max.9801050
200
365
510
280
45
80-120
50
190
530 60
0
850
Z 0001
Countertop washbasinSANO
81343.7
Order no. 81343.7Certified to DIN EN 32Dimensions 1050 x 510 mmSpecification 1 centre tap holeSpecial specification 3 tap holes Weight 19,0 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
Mounting acc. excl. Mounting set, order no. 89988.2Colours see colour table
9.22Z 0001
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
800
200
300
480
650*
300
45
80-120
50
190
530 60
0
850
280
max.775 max.295
Order no. 81347.8Certified to DIN EN 32Dimensions 800 x 480 mmSpecification 1 centre tap hole
cutable to 650 mm, with2 side cover to 680 mm
Special specification 3 tap holes Weight 13,5 kgAccessories excl. Syphon cover, order no. 81947.1Accessories excl. Side cover for cut surface
left, order no. 87340.3right, order no. 87340.4
Countertop basin / cutable VIENNA-VARIA
* = minimum measure for cutting
81347.8
Mounting acc. excl. Mounting set, order no. 89988.2Otherwise When ordering the cut version, state total
overall measurement of washbasin (use the order form for cutting)
Colours see colour table
9.23Z 0001
VANITY BASINS
1000
30021
5
550
800*
80-120
50
225
850
600
530
45
280
300
max.975 max.295
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAOrder no. 81347.9Certified to DIN EN 32Dimensions 1000 x 550 mmSpecification 1 centre tap hole
cutable to 800 mm, with2 side cover to 830 mm
Special specification 3 tap holes Weight 19,0 kgAccessories excl. Syphon cover, order no. 81947.9Accessories excl. Side cover for cut surface
left, order no. 87340.3right, order no. 87340.4
Countertop basin / cutable VIENNA-VARIA
81347.9
* = minimum measure for cutting
Mounting acc. excl. Mounting set, order no. 89988.2Otherwise When ordering the cut version, state total
overall measurement of washbasin (use the order form for cutting)
Colours see colour table
9.24
300
570
1300
200
300
500
570 455
45
855
50
80-120
530 60
0 850
180
1150*
max.1275 max.295
Z 0001
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
Countertop double basin / cutableVIENNA-VARIA DUE
81341.9
VANITY BASINS
Order no. 81341.9Certified to DIN EN 32Dimensions 1300 x 500 mmSpecification per basin 1 centre tap hole
cutable to 1150 mm, with2 side cover to 1180 mm
Special specification per basin 3 tap holesWeight 26,6 kgAccessories excl. Side cover for cut surface
left, order no. 87340.3right, order no. 87340.4
* = minimum measure for cutting
Mounting acc. excl. Mounting set, order no. 89988.2Otherwise When ordering the cut version, state total
overall measurement of washbasin (use the order form for cutting)
Colours see colour table
We would like to order ______ piece(s)(Please use separate order form for each cut!)
81347.8 800 mm
81347.9 1000 mm
81341.9 1300 mm
symmetric cut, right angle
Colour ___________________________
Precise measurementsfor symmetric cuts
_______________ mm
650800
1150
680830
1180
665815
1165
325400575
325400575
340415590
340415590
WashbasinsVienna-Varia
symmetric cut, diagonal
asymmetric cut, right angle
asymmetric cut, diagonal
right angled cut on one side
cut diagonally on one side
without end caps for cut surface
with end cap(s) (already affixed)
with 2 end caps (left and right)
___ end cap(s) left
___ end cap(s) right
Right-angled cut
Precise measurementsfor symmetric cuts
Diagonal cut
B = __________ mm
F = __________ mm
Precise measurementsfor asymmetric cuts
BL = __________ mm
FL = __________ mm
BR = __________ mm
FR = __________ mm
Precise measurementsfor asymmetric cuts
L = __________ mm
R = __________ mm
OBJECT: _____________________________________
FITTER: _______________________________________
ORDER NO. ____________________________________
WHOLESALER: __________________________________(or enclose order form)
F
B
FL FR
BL BR
L R
Only right angled cuts are possible. In case ofdeliveries with affixed end caps, the widthgiven by you is always inclusive of the endcaps.The uncut widths of the washbasins (800,1000, 1300 mm) are the usual ceramictolerances.If exact widths for installation are required,there are also cuts for widths of 800, 1000,1300 mm necessary.Note additional price for cutting!
Vienna-Varia81347.881347.981341.9
right min.with
end cap(mm)
left min.with
end cap(mm)
rightmin.
(mm)
leftmin.
(mm)
with 1end cap
(mm)
with 2end caps
(mm)
can becut up toa max.(mm)
M i n i m u m w e i d t h ssymmetric cut asymmetric cut
MAKE A COPY BEFORE FILLING OUT THE FORM! Mark the relevant box or give precise measurements
ATTENTION:
VANITY BASINS
Order form for variable cuts of washbasins
9.25Z 0002
9.26
280
50
80-120
600
200
530
~850
*
80-120
850
600
530
280
200
50
585
1040
180
Z 0002
Countertop basinDESIGN81354.7
Order no. 81354.7Certified to DIN EN 32Dimensions 1040 x 585 mmSpecification 1 centre tap hole
anti-splash rimSpecial specification 3 tap holes Weight 20,0 kgAccessories excl. Pedestal, order no. 81954.7
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
* = Effective height must be fixed according to the height of the pedestal.
Mounting acc. excl. Mounting set, order no. 89988.2Colours see colour table
VANITY BASINS
Pedestal81954.7
Order no. 81954.7matching for Washbasin order no. 81354.7Weight 7,0 kg
TECHNICAL DATA
9.27Z 0002
Colours see colour table
9.28
80-120
280
50
530 600
850
45
190
600
240
390
520
1020
355
max.990 max.345
630*
Z 0002
Countertop basin / cutableGALLERY
81417.6
Order no. 81417.6Certified to DIN EN 32Dimensions 1020 x 520 mmSpecification 1 centre tap hole
cutableSpecial specification 3 tap holesWeight 18,0 kgAccessories excl. Syphon cover, order no. 81917.2
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
* = minimum measure for cutting
Mounting acc. excl. Mounting set, order no. 89988.2Otherwise When ordering the cut version, state total
overall measurement of washbasin (use the order form for cutting)
Colours see colour table
We would like to order ______ piece(s)(Please use separate order form for each cut!)
symmetric cut, right angle
Colour ___________________________
Precise measurementsfor symmetric cut
_______________ mm
There are no end caps for model 81417.6.The uncut width of the washbasin (1020 mm) is the usualceramic tolerances.If exact width for installation is required, there is alsocut for width 1020 necessary.
Note additional price for cutting!
Gallery81417.6 630 315 315
right min(mm)
left min(mm)
can be cut up to a max.(mm)
M i n i m u m w e i d t h ssymmetric cut asymmetric cut
Washbasin Gallery
symmetric cut, diagonal
asymmetric cut, right angle
asymmetric cut, diagonal
right angle cut on one side
cut diagonally on one side
Right angled cut
Precise measurementsfor symmetric cut
Diagonal cut
B = __________ mm
F = __________ mm
Precise measurementsfor asymmetric cut
BL = __________ mm
FL = __________ mm
BR = __________ mm
FR = __________ mm
Precise measurementsfor asymmetric cut
L = __________ mm
R = __________ mm
OBJECT: _____________________________________
FITTER: _______________________________________
ORDER NO. ____________________________________
WHOLESALER: __________________________________(or enclose order form)
F
B
FL FR
BL BR
L R
81417.6 1020 mm
MAKE A COPY BEFORE FILLING OUT THE FORM! Mark the relevant box or give precise measurements
ATTENTION:
VANITY BASINS
Order form for variable cuts of washbasins
9.29Z 0002
9.30
855
1350
640
240
600
390
520
35580-120
190
455 45
530
600
850
50
max.1320 max.345
640
Z 0002
Countertop double basinGALLERY
81417.8
Order no. 81417.8Certified to DIN EN 32Dimensions 1350 x 520 mmSpecification per basin 1 centre tap holeSpecial specification per basin 3 tap holesWeight 30,5 kgAccessories excl. Syphon cover, order no. 81917.2
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
Mounting acc. excl. Mounting set, order no. 89988.2Colours see colour table
VANITY BASINS
Syphon cover81917.2
Order no. 81917.2matching for Washbasins order no. 81417.6, 81417.8 Weight 6,5 kg
TECHNICAL DATA
9.31Z 0002
Mounting acc. incl. Device for fixing, order no. 89001.2 Colours see colour table
B U I LT I N B A S I N S
9.32
405
80-120
850
600
530
200
30
530
115
490
355
Z 0002
Built in basinBIROVA81119.1
Order no. 81119.1Dimensions 530 x 405 mm Specification without tap holeSpecial specification glazed outer surface Weight 8,0 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
Mounting acc. excl. Mounting set, order no. 89904.0Colours see colour table
9.33
400
80-120
200
600
530
850
30
415
165
365
445
Z 0002
Built in basinBIJOU
81122.0
Order no. 81122.0Dimensions 445 x 400 mm Specification 1 centre tap holeWeight 7,0 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
Mounting acc. excl. Mounting set, order no. 89904.0Colours see colour table
9.34
455
80-120
30
210
530 60
0
850
480
165
400
520
Z 0002
Built in basinBIJOU
81123.0
Order no. 81123.0Dimensions 520 x 455 mm Specification 1 centre tap holeSpecial specification glazed outer surfaceWeight 9,5 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
Mounting acc. excl. Mounting set, order no. 89904.0Colours see colour table
9.35
480
80-120
30
210
600
530
850
510
175
550
420
Z 0002
Built in basinBIJOU
81124.0
Order no. 81124.0Dimensions 550 x 480 mm Specification 1 centre tap holeSpecial specification glazed outer surfaceWeight 9,5 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
Mounting acc. excl. Mounting set, order no. 89904.0Colours see colour table
9.36
485
80-120
225
850
600
530
30
510
170
430
555
Z 0002
Built in basinBIJOU
81124.5
Order no. 81124.5Dimensions 555 x 485 mm Specification without tap holeWeight 10,0 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
Mounting acc. excl. Mounting set, order no. 89904.0Colours see colour table
9.37
565
95
415
350
505
80-120
1253
0 600
850
220
Z 0002
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
Built in basinLIPSY
Order no. 81129.1Dimensions 565 x 415 mm Specification without tap holeWeight 8,0 kg
81129.1
Mounting acc. excl. Mounting set, order no. 89911.0Colours see colour table
9.38
455
80-120
30
195
530 60
0
850
410
180
410
455
Z 0002
Built in basinFIORA
81178.0
Order no. 81178.0Dimensions 455 x 455 mmSpecification 1 centre tap holeWeight 8,0 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
Mounting acc. excl. Mounting set, order no. 89904.0Colours see colour table
9.39
440
190
440
485
485
530
80-120
850
600
30
205
Z 0002
Built in basinFIORA
81178.2
Order no. 81178.2Dimensions 485 x 485 mmSpecification 1 centre tap holeSpecial specification 3 tap holes Weight 9,0 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
Mounting acc. excl. Mounting set, order no. 89904.0Colours see colour table
9.40Z 0002
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
400
80-120
30
195
530 60
0
850
410
160
365
440
COMPAC81188.0
Order no. 81188.0Dimensions 440 x 400 mm Specification 1 centre tap holeSpecial specification 3 tap holesWeight 8,0 kg
Built in basin
Mounting acc. excl. Mounting set, order no. 89904.0Colours see colour table
9.41
420
80-120
30
205
530 60
0
850
500
130
350
545
Z 0002
Built in basinSAVOY
81319.2
Order no. 81319.2Dimensions 545 x 420 mm Specification without tap hole
hidden overflowglazed outer surface
Weight 8,4 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
Mounting acc. excl. Mounting set, order no. 89904.0Colours see colour table
9.42
485
180
405
446
520
80-120
30
210
530 60
0
850
Z 0002
Built in basinCRISTAL
81323.0
Order no. 81323.0Dimensions 520 x 446 mm Specification 1 centre tap holeWeight 8,2 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
Mounting acc. excl. Mounting set, order no. 89904.0Colours see colour table
VANITY BASINS
Fixing set89904.0
1. Vanity basin2. Silicon caoutchouc3. Syntetic resin top4. Syntetic resin adhesive5. Worktop6. Wooden wedge7. Tension clip8. Wood screw9. Dowelling paste10. Pastened stone
DESCRIPTIONOrder no. 89904.0matching to Built in basins order no. 81119.1, 81122.0,
81123.0, 81124.0, 81124.5, 81178.0, 81178.2,81188.0, 81319.2, 81323.0
TECHNICAL DATA
3
wooden worktop 4
5
6
7
8
2
1
9.43Z 0002
stone worktop
9aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 5 2 1
7
8aaaaaaaaaaaaaaa7
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaastone worktop
2
1
8
5
10
9
VANITY BASINS
Fixing set89911.0
1. Vanity basin2. Worktop3. Tension clip4. Wood screw5. Silicon caoutchouc6. Hexagonal screw with plug7. Dowelling paste
DESCRIPTIONOrder no. 89911.0matching to Built in basin order no. 81129.1
TECHNICAL DATA
50
18
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa a23 ca. 6
stone worktop
2
7
3
6
5
1
4
wooden worktop
5
2
3
4
1
9.44Z 0002
D R O P I N B A S I N S
9.45
560
160
450
80-120
1219
560
0
530
850
Z 0002
Drop in basinINDOVA81139.1
Order no. 81139.1Dimensions 560 x 450 mmSpecification 1 centre tap holeWeight 8,0 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
Mounting acc. incl. Template, order no. 89139.2Mounting acc. excl. Silicon caoutchoucColours see colour table
9.46
600
160
480
80-120
1219
5
530 600
850
Z 0002
Drop in basinINDOVA81139.2
TECHNICAL DRAWINGS / S 1 : 20
VANITY BASINS
Order no. 81139.2Dimensions 600 x 480 mmSpecification 1 centre tap holeWeight 9,0 kg
TECHNICAL DATAMounting acc. incl. Template, order no. 89139.2Mounting acc. excl. Silicon caoutchoucColours see colour table
9.47
620
175
485
80-120
1519
5
530 600
850
Z 0002
Drop in basinINDOVA81139.3
TECHNICAL DRAWINGS / S 1 : 20
VANITY BASINS
Order no. 81139.3Dimensions 620 x 485 mmSpecification 1 centre tap holeSpecial specification 3 tap holes Weight 9,5 kg
TECHNICAL DATAMounting acc. incl. Template, order no. 89742.7Mounting acc. excl. Silicon caoutchoucColours see colour table
9.48
555
80-120
850
530 60
016
515
180
430
Z 0002
Drop in basinVIENNA81141.1
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
Order no. 81141.1Dimensions 555 x 430 mmSpecification 1 centre tap holeSpecial specification 3 tap holesWeight 7,2 kg
Mounting acc. incl. Template, order no. 89744.7Mounting acc. excl. Mounting set, order no. 89909.0Colours see colour table
9.49
630
210
510
80-120
2018
0
850
600
530
Z 0002
Drop in basinVIENNA81141.2
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
Order no. 81141.2Dimensions 630 x 510 mmSpecification 1 centre tap holeSpecial specification 3 tap holesWeight 10,0 kg
Mounting acc. incl. Template, order no. 89744.8Mounting acc. excl. Mounting set, order no. 89909.0Colours see colour table
9.50
490
80-120
1517
553
0 600 85
0
490
180
Z 0002
Drop in basinFIORA
81177.2
Order no. 81177.2Dimensions Ø 490 mmSpecification 1 centre tap holeWeight 12,0 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
Mounting acc. incl. Template, order no. 89139.2Mounting acc. excl. Silicon caoutchoucColours see colour table
9.51Z 0002
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
Drop in basinMYLIFE81194.6
215
480
30
145
530 60
0
850
750
120
Order no. 81194.6Dimensions 750 x 480 mmSpecification Charge 104 – 1 centre tap hole Special specification Charge 109 – without tap hole Weight 13,5 kg
Mounting acc. incl. Charge 104 – run off and overflow system Clou GEBERIT, order no. 89194.1Charge 109 – valve without overflow, order no. 89543.9Template, order no. 89794.6
Mounting acc. excl. Mounting set, order no. 89909.0Colours see colour table
9.52
560
1518
560
0
530
850
80-120
160
420
Z 0002
Drop in basin OBJECT81206.4
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
Order no. 81206.4Dimensions 560 x 420 mmSpecification 1 centre tap holeSpecial specification 3 tap holes Weight 8,5 kg
Mounting acc. incl. Template, order no. 89206.4Mounting acc. excl. Mounting set, order no. 89909.0Colours see colour table
9.53
565
190
480
80-120
1518
060
0
530
850
Z 0002
81253.2
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
Drop in basin LAURA
Order no. 81253.2Dimensions 565 x 480 mmSpecification 1 centre tap holeSpecial specification 3 tap holes Weight 8,0 kg
Mounting acc. incl. TemplateColours see colour table
9.54Z 0002
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
280
500
80
225
530/
560*
600/
660* 90
0
500
120/160*
50
Order no. 81397.1Certified to DIN EN 32Dimensions 500 x 500 mmSpecification 1 centre tap hole Weight 10,0 kg
Drop in basinALESSI
* = Adhere to these dimensions if ALESSI-INDA furniture is being fitted.
Mounting acc. incl. with concealed ceramic outlet and overflow, chrome-plated vertical cover, order no. 89097.8Template, order no. 89197.3
Mounting acc. excl. Syphon D40 chrome order no. 89397.9Colours see colour table
81397.1
VANITY BASINS
Mounting indication
3
2
1
1. Vanity basin2. Worktop3. Silicon caoutchouc
DESCRIPTIONmatching to Drop in basins order no. 81139.1, 81139.2,
81139.3, 81177.2, 81253.2
TECHNICAL DATA
9.55Z 0002
VANITY BASINS
Fixing set89909.0
2
3
4
6
1
5
1. Vanity basin2. Worktop3. Fixing part4. Adjusting screw5. Hexagonal screw with plug6. Silicon caoutchouc
DESCRIPTIONOrder no. 89909.0matching to Drop in basins order no. 81141.1, 81141.2,
81194.6, 81206.4
TECHNICAL DATA
9.56Z 0002
VANITY BASINS
9.57Z 0002
Mounting indication
3
2
1
1. Vanity basin2. Worktop3. Silicon caoutchouc
DESCRIPTIONmatching for Drop in basin order no. 81397.1
TECHNICAL DATA
S E M I R E C E S S E D B A S I N S
9.58
555
180
460
80-120
25
200
850
600
530
20 240
260
Z 0002
Semi recessed basinSWING
81041.1
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
Order no. 81041.1Dimensions 555 x 460 mmSpecification 1 centre tap holeSpecial specification 3 tap holesWeight 14,0 kg
Mounting acc. incl. Template, order no. 89140.1Mounting set, order no. 89060.2
Colours see colour table
9.59
655
195
555
80-120
25
210
850
600
530
25 255
280
Z 0002
Semi recessed basinSWING
81240.4
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
Order no. 81240.4Dimensions 655 x 555 mmSpecification 1 centre tap holeSpecial specification 3 tap holesWeight 19,0 kg
Mounting acc. incl. Template, order no. 89140.5Mounting set, order no. 89909.0
Colours see colour table
9.60
555
25518
0
455
25
255
2585
0
20
85080-120
175
600
530
Z 0002
Semi recessed basinVIENNA81140.3
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
Order no. 81140.3Dimensions 555 x 455 mmSpecification 1 centre tap holeSpecial specification 3 tap holesWeight 10,0 kg
Mounting acc. incl. Template, order no. 89140.3Mounting set, order no. 89909.0
Colours see colour table
9.61
650
25
280
2585
0
20
530
85080-120
210
600
200
540
280
Z 0002
Semi recessed basinVIENNA81140.5
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
Order no. 81140.5Dimensions 650 x 540 mmSpecification 1 centre tap holeSpecial specification 3 tap holesWeight 12,0 kg
Mounting acc. incl. Template, order no. 89140.5Mounting set, order no. 89909.0
Colours see colour table
9.62
430
80-120
530 60
0
850
2520
0
270
560
160
Z 0002
Semi recessed basinOBJECT81306.4
Order no. 81306.4Dimensions 560 x 430 mmSpecification 1 centre tap holeSpecial specification 3 tap holesWeight 8,8 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
Mounting acc. incl. Template, order no. 89306.4Mounting set, order no. 89909.0
Colours see colour table
9.63
650
195
280
530
195
26020
80-120
20
600
850
530
Z 0002
Semi recessed basinGALLERY
81317.4
Order no. 81317.4Dimensions 650 x 530 mmSpecification 1 centre tap holeSpecial specification 3 tap holesWeight 14,5 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
Mounting acc. incl. Template, order no. 89140.5Mounting set, order no. 89909.0
Colours see colour table
VANITY BASINS
Fixing set89060.2
4
3
1
2
1. Vanity basin2. Worktop3. Fixing part4. Silicon caoutchouc
DESCRIPTIONOrder no. 89060.2matching to Semi recessed basins oder no. 81041.1
TECHNICAL DATA
9.64Z 0002
VANITY BASINS
Fixing set89909.0
2
3
4
6
1
5
1. Vanity basin2. Worktop3. Fixing part4. Adjusting screw5. Hexagonal screw with plug6. Silicon caoutchouc
DESCRIPTIONOrder no. 89909.0matching to Semi recessed basins order no. 81140.3,
81140.5, 81240.4, 81306.4, 81317.4
TECHNICAL DATA
9.65Z 0002
W A S H B A S I N B O W L S
225
440
140
160
530 60
0
885
650
120
Order no. 81894.4Dimensions 650 x 440 mmSpecification Charge 104 – 1 centre tap hole Special specification Charge 109 – without tap hole Weight 13,0 kg
Mounting acc. incl. Charge 104 – run off and overflow system Clou GEBERIT, order no. 89194.1Charge 109 – valve without overflow, order no. 89543.9Template, order no. 89794.4Mounting set, order no. 89194.0
Colours see colour table
9.66Z 0002
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
Washbasin bowlMYLIFE81894.4
280
520
175
530/
560*
600/
560* 90
0
520
120/160*
50
Order no. 81897.1Certified to DIN EN 32Dimensions 520 x 520 mmSpecification Charge 104 – 1 centre tap hole Special specification Charge 109 – without tap hole Weight 12,5 kg
* = Adhere to these dimensions if ALESSI-INDA furniture is being fitted.
Mounting acc. incl. Charge 104 – run off and overflow system Clou GEBERIT, order no. 89194.1Charge 109 – valve without overflow, order no. 89543.9Template, order no. 89197.8Fixing set, order no. 89194.0
Mounting acc. excl. Syphon D40 chrome, order no. 89397.9Colours see colour table
9.67Z 0002
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
VANITY BASINS
Washbasin bowl
81897.1ALESSI
VANITY BASINS
Fixing set89194.0
DESCRIPTIONTECHNICAL DATA
2
1
4
5
6
7
3
1. Washbasin bowl2. Worktop3. Silicon caoutchouc4. Plug5. Washer6. Hexagonal nut7. Grubscrew
Order no. 89194.0matching to Washbasin bowl order no. 81894.4, 81897.1
9.68Z 0002
S E T D O R A D O
* = Effective height must be fixed according to the height of the pedestal.
600
205
500
280 280
80-120
45
215
530 60
0 ~850
*
45
215
600
530
85080-120
SET DORADO
Washbasin
10.1Z 0001
81004.4
Order no. 81004.4Certified to DIN EN 32Dimensions 600 x 500 mmSpecification 1 centre tap holeSpecial specification 3 tap holesWeight 17,0 kgAccessories excl. Syphon cover, order no. 81901.1
Pedestal, order no. 81901.0
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAMounting acc. excl. Mounting set, order no. 89988.2Colours see colour table
* = Effective height must be fixed according to the height of the pedestal.
280 280
80-120
45
215
~840
*
530 60
0
80-120
45
215
530 60
0
850
650
500
200
SET DORADO
Washbasin
10.2Z 0001
81004.5
Order no. 81004.5Certified to DIN EN 32Dimensions 650 x 500 mmSpecification 1 centre tap holeSpecial specification 3 tap holesWeight 19,0 kgAccessories excl. Syphon cover, order no. 81901.1
Pedestal, order no. 81901.0
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAMounting acc. excl. Mounting set, order no. 89988.2Colours see colour table
Syphon cover81901.1
Pedestal81901.0
Order no. 81901.0matching for Washbasins order no. 81004.4, 81004.5Weight 8,6 kgColours see colour table
TECHNICAL DATA / SYPHON COVEROrder no. 81901.1matching for Washbasins order no. 81004.4, 81004.5Weight 4,6 kgMounting acc. incl. Device for fixing, order no. 89001.0Colours see colour table
TECHNICAL DATA / PEDESTAL
SET DORADO
10.3Z 0002
Order no. 81794.4Certified to DIN EN 111Dimensions 440 x 380 mmSpecification without tap hole Special specification 1 centre tap hole Weight 5,0 kg
850
175
70
13580-120
565
615
185
440
380
300
185135
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
10.4Z 0001
SET DORADO
Small washbasinTRIBERG
81794.4
Mounting acc. incl. Mounting set, order no. 89840.0 Colours see colour table
Floorstanding WC combination
SET DORADO
DUO
10.5
360
720
380
840
750
3040
0
175
260
70-300
180
Z 0002
82276.0
Order no. 82276.0Certified to EN 977, EN 33Specification Washdown for 6-l-flushOutlet horizontal
VARIO, vertical 70 - 300 mmWeight 23,5 kgAccessories excl. Cistern, order no. 82035.0, 82636.0, 82645.3,
82835.0Seat and cover, order no. 89021.0
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAMounting acc. excl. Special elbow for vertical LAUFEN connection
70 - 220 mm, order no. 89009.2Special elbow for vertical only LAUFEN-connection 220 - 300 mm, order no. 89902.5
Colours see colour table
175
60
315
380
295 41
0
TECHNICAL DRAWINGS / S 1 : 20
SET DORADO
Cistern
82035.0
Order no. 82035.0Certified to DIN 19542matching for Floorstanding WC pan order no. 82276.0Specification Flushing mechanisme GEBERIT
water condensation insulationFlush can be interrupted by pressing twice
Water inlet side or rearWeight 13,0 kg
TECHNICAL DATA
10.6Z 0002
Mounting acc. excl. Corner valve for water inletColours see colour table
MODERNA
175
60
315
380
295 41
0
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
10.7Z 0002
SET DORADO
CisternMODERNA
Order no. 82636.0Certified to Australian Standardmatching for Floorstanding WC pan order no. 82276.0Specification Flushing mechanisme GEBERIT
water condensation insulationDual-Flush (3/6-l-flush)
Water inlet side or rearWeight 13,0 kg
82636.0
Mounting acc. excl. Corner valve for water inletColours see colour table
140
35
380
410
175
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
10.8Z 0002
SET DORADO
CisternMODERNA
Order no. 82645.3Certified to Taiwan Standardmatching for Floorstanding WC pan order no. 82276.0Specification Flushing mechanisme DAL
Flush can be interrupted by pressing twiceWater inlet bottom Weight 13,0 kg
82645.3
Colours see colour table
Order no. 82835.0Certified to DIN 19542matching for Floorstanding WC pan order no. 82276.0Specification Flushing mechanisme DAL
water condensation insulationFlush can be interrupted by pressing twice
Water inlet side or rearWeight 13,0 kg
175
60
315
380
295 41
0
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
10.9Z 0002
SET DORADO
CisternMODERNA
82835.0
Mounting acc. excl. Corner valve for water inletColours see colour table
Order no. 82061.9Specification WashdownOutlet vertical Weight 13,0 kgAccessories excl. Seat and cover, order no. 89021.0
390
2404034
5
365
460
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
10.10Z 0002
SET DORADO
Floorstanding WC panSEDAN
82061.9
Colours see colour table
355
470 515
390 60
340
20
270-300
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
10.11Z 0002
SET DORADO
Order no. 82140.8Certified to EN 977, EN 37Specification Washdown for 6-l-flushOutlet vertical Weight 12,0 kgAccessories excl. Seat and cover, order no. 89021.0
Floorstanding WC panMELOS
82140.8
Colours see colour table
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
10.12Z 0002
SET DORADO
Wallhung WC panPROFIL
355
510
180
100
135
225
20
1040
0
65
40
82019.0
Order no. 82019.0Certified to EN 977, EN 38Specification Washdown for 6-l-flushWeight 14,0 kgAccessories excl. Seat and cover, order no. 89021.0
Colours see colour table
Wallhung WC pan
SET DORADO
SUPREMA
10.13
355
530
180
100
135
225
20
1040
0
50
40
Z 0002
82165.0
Order no. 82165.0Certified to EN 977, EN 38Specification Washdown for 6-l-flushWeight 14,0 kgAccessories excl. Seat and cover, order no. 89021.0
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAColours see colour table
SET DORADO
Seat and cover OBJECT89021.0
Order no. 89021.0matching for Floorstanding WC pan order no. 82061.9,
82140.8, 82276.0Wallhung WC pan order no. 82019.0, 82165.0
Weight 2,8 kg
TECHNICAL DATA
10.14Z 0002
Mounting set includedColours see colour table
Order no. 83073.0Specification 1 centre tap holeWeight 18,0 kg
360
600
50
200
245150
100
400
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
10.15Z 0001
SET DORADO
MODERNAFloorstanding bidet
83073.0
Colours see colour table
Order no. 83006.1Specification 1 centre tap holeWeight 14,5 kg
355
530
180
325
300
100
120
40
400
210
60 180
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
10.16Z 0001
SET DORADO
SUPREMA83006.1
Wallhung bidet
Mounting acc. excl. Steel support, order no. 89900.0Steel support, UK-Version, order no. 89900.1Bolt caps, order no. 89263.0
Colours see colour table
S E T O B J E C T
SET OBJECT
Washbasin
* = Effective height must be fixed according to the height of the pedestal.
11.1
430
280 280
550
200
80-120
55
195
530 60
0 ~850
*
80-120
55
195
530 60
0
850
Z 0002
81106.1
Order no. 81106.1Certified to DIN EN 32Dimensions 550 x 430 mmSpecification 1 centre tap hole Special specification 3 tap holes Weight 12,5 kgAccessories excl. Syphon cover, order no. 81916.1
Pedestal, order no. 81916.0
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
Mounting acc. excl. Mounting set, order no. 89988.2Colours see colour table
SET OBJECT
Washbasin
* = Effective height must be fixed according to the height of the pedestal.
11.2
400
280 280
600
200
80-120
55
195
530 60
0
850 80-120
55
195
530 60
0 ~850
*
Z 0002
81106.2
Order no. 81106.2Certified to DIN EN 32Dimensions 600 x 400 mmSpecification 1 centre tap hole Special specification 3 tap holes Weight 12,5 kgAccessories excl. Syphon cover, order no. 81916.1
Pedestal order, no. 81916.0
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
Mounting acc. excl. Mounting set, order no. 89988.2Colours see colour table
SET OBJECT
Washbasin
* = Effective height must be fixed according to the height of the pedestal.
11.3
600
205
465
280280
55
80-120
195
~855
*
530 60
080-120
55
195
530 60
0
850
Z 0002
81106.4
Order no. 81106.4Certified to DIN EN 32Dimensions 600 x 465 mmSpecification 1 centre tap hole Special specification 3 tap holes Weight 13,5 kgAccessories excl. Syphon cover, order no. 81916.1
Pedestal, order no. 81916.0
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
Mounting acc. excl. Mounting set, order no. 89988.2 Colours see colour table
SET OBJECT
Washbasin
* = Effective height must be fixed according to the height of the pedestal.
11.4
650
200
480
280 280
80-120
55
~865
*
600
530
195
55
195
850
600
53080-120
Z 0002
81106.5
Order no. 81106.5Certified to DIN EN 32Dimensions 650 x 480 mmSpecification 1 centre tap hole Special specification 3 tap holes Weight 17,0 kgAccessories excl. Syphon cover, order no. 81916.1
Pedestal, order no. 81916.0
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
Mounting acc. excl. Mounting set, order no. 89988.2 Colours see colour table
Order no. 81916.1matching for Washbasins order no. 81106.1, 81106.2,
81106.4, 81106.5 Weight 6,5 kgMounting acc. incl. Device for fixing, order no. 89001.0Colours see colour table
Order no. 81916.0matching for Washbasins order no. 81106.1, 81106.2,
81106.4, 81106.5 Weight 7,0 kgColours see colour table
Syphon cover81916.1
Pedestal81916.0
TECHNICAL DATA / SYPHON COVER TECHNICAL DATA / PEDESTAL
SET OBJECT
11.5Z 0002
11.6
560
1518
560
0
530
850
80-120
160
420
Z 0002
Order no. 81206.4Dimensions 560 x 420 mmSpecification 1 centre tap hole Special specification 3 tap holes Weight 8,5 kgAccessories incl. Template, order no. 89206.4
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
Drop in basin81206.4
SET OBJECT
Mounting acc. excl. Mounting set, order no. 89909.0Colours see colour table
SET OBJECT
Semi recessed basin
11.7
430
80-120
530 60
0
850
2520
0
270
560
160
Z 0002
Order no. 81306.4Dimensions 560 x 430 mmSpecification 1 centre tap hole Special specification 3 tap holes Weight 8,8 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
81306.4
Mounting acc. incl. Template, order no. 89306.4Mountimg set, order no. 89909.0
Colours see colour table
SET OBJECT
Fixing set89909.0
2
3
4
6
1
5
1. Vanity basin2. Worktop3. Fixing part4. Adjusting screw5. Hexagonal screw with plug6. Silicon caoutchouc
DESCRIPTIONOrder no. 89909.0matching for Drop in basin order no. 81206.4
Semi recessed basin order no. 81306.4
TECHNICAL DATA
11.8Z 0002
SET OBJECT
Small washbasin
11.9
500
95
220
365
45
155
850
650
580
80-120 40
Z 0002
81506.0
Order no. 81506.0Certified to DIN EN 111Dimensions 500 x 220 mmSpecification Prepunched tap hole left and right Weight 6,0 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
Mounting acc. excl. Mounting set, order no. 89988.2Colours see colour table
SET OBJECT
Small washbasin
270
80-120
850
650
580
180
45
145
350
135
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
11.10Z 0002
81506.3
Order no. 81506.3Certified to DIN EN 111Dimensions 350 x 270 mmSpecification 1 centre tap hole Weight 5,2 kg
Mounting acc. excl. Mounting set, order no. 89988.2Colours see colour table
Order no. 81506.4Certified to DIN EN 111Dimensions 450 x 310 mmSpecification 1 centre tap hole Weight 8,0 kg
450
145
310
280
80-120
45
155
850
650
580
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
11.11Z 0002
SET OBJECT
Small washbasin81506.4
Mounting acc. excl. Mounting set, order no. 89988.2 Colours see colour table
Order no. 81506.5Certified to DIN EN 111Dimensions 500 x 320 mmSpecification 1 centre tap hole Weight 9,5 kg
320
280
580 65
0 850
160
45
80-120500
145
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
11.12Z 0002
SET OBJECT
Small washbasin81506.5
Mounting acc. excl. Mounting set, order no. 89988.2Colours see colour table
SET OBJECT
Floorstanding WC combination
11.13
680
225
390
165
40
355
615
800
750
355
Z 0002
82126.0
Order no. 82126.0Certified to DIN 1385-6 EN 33Specification Washdown for 6-l-flushOutlet vertical Weight 20,0 kgAccessories excl. Cistern, order no. 82616.0, 82621.3, 82621.8,
82806.0 Seat and cover, order no. 89021.0
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAMounting acc. excl. Mounting set, order no. 89734.4Colours see colour table
SET OBJECT
Floorstanding WC combination
11.14
670
390
355
615
14570-130
185
165
40
800
750
355
Z 0002
82126.9
Order no. 82126.9Certified to EN 977, EN 33Specification Washdown for 6-l-flushOutlet horizontal
VARIO, vertical 70 - 130 mm Weight 20,0 kgAccessories excl. Cistern, order no. 82616.0, 82621.3, 82621.8,
82806.0Seat and cover, order no. 89021.0
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAMounting acc. excl. Special elbow for vertical connection,
order no. 89009.2 Mounting set, order no. 89734.4
Colours see colour table
Cistern82616.0
Order no. 82616.0Certified to DIN 19542matching for Floorstanding WC pan order no. 82126.0,
82126.9Specification Flushing mechanisme GEBERIT
water condensation insulationDual-Flush (3/6-l-flush)
Water inlet rear or side Weight 11,0 kg
TECHNICAL DATA
SET OBJECT
TECHNICAL DRAWINGS / S 1 : 20
355 165
80
370
320
340
390
11.15Z 0002
Mounting set incl. Corner valve for water inletColours see colour table
11.16Z 0002
SET OBJECT
Order no. 82621.3Certified to China Standardmatching for Floorstanding WC pan order no. 82126.0,
82126.9Specification Flushing mechanisme DAL, Charge 290
Flush can be interrupted by pressing twiceWater inlet bottom Weight 11,0 kg
165
370
355
390
35
95
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
Cistern82621.3
Colours see colour table
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
11.17Z 0002
SET OBJECT
Order no. 82621.8Certified to Taiwan Standardmatching for Floorstanding WC pan order no. 82126.0,
82126.9Specification Flushing mechanisme GEBERIT, Charge 291
Dual-Flush (3/6-l-flush)Water inlet bottom Weight 11,0 kg
165
370
355
390
35
95
Cistern82621.8
Colours see colour table
Order no. 82806.0Certified to DIN 19542 KIWAmatching for Floorstanding WC pan order no. 82126.0,
82126.9Specification Flushing mechanisme DAL
Flush can be interrupted by pressing twiceWater inlet rear or side Weight 11,0 kg
355 165
80
370
320
340
390
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
11.18Z 0002
SET OBJECT
Cistern82806.0
Mounting set excl. Corner valve for water inletColours see colour table
Order no. 82146.0Certified to EN 977, EN 37Specification Washdown for 6-l-flushOutlet horizontalWeight 12,5 kgAccessories excl. Seat and cover, order no. 89021.0
355
470 39
0
40
340
180
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
11.19Z 0002
SET OBJECT
Floorstanding WC pan82146.0
Colours see colour table
SET OBJECT
Wallhung WC pan
11.20
530
180
135
225
100
400
15
20
40
40
355
Z 0002
82106.0
Order no. 82106.0Certified to EN 977, EN 38Specification Washdown for 6-l-flushWeight 13,0 kgAccessories excl. Seat and cover, order no. 89021.0
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAColours see colour table
SET OBJECT
Seat and cover89021.0
Order no. 89021.0matching for Floorstanding WC pan order no. 82126.0,
82126.9, 82146.0Wallhung WC pan order no. 82106.0
Weight 2,8 kg
TECHNICAL DATA
11.21Z 0002
Mounting set includedColours see colour table
SET OBJECT
Floorstanding bidet
11.22
565
150
100
390
260
195
50
355
Z 0002
83076.1
Order no. 83076.1Specification 1 centre tap hole Weight 17,0 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAColours see colour table
Order no. 83076.3Specification 3 tap holes Weight 19,0 kg
565
150
100
390
260
195
50
355
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
11.23Z 0002
SET OBJECT
Floorstanding bidet83076.3
Colours see colour table
SET OBJECT
Wallhung bidet
11.24
20
180
215
400
125
40
565
210
355 150
325
120
100
Z 0002
83106.1
Order no. 83106.1Specification 1 centre tap hole Weight 16,0 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAMounting acc. excl. Steel support, order no. 89900.0
Steel support, UK-Version, order no. 89900.1Bolt caps, order no. 89263.1
Colours see colour table
S E T B AT H L I N E
SET BATHLINE
* = Effective height must be fixed according to the height of the pedestal.
12.1
600
460
200
80-120
200
280
50
600
530
850 80-120
200
280
50
600
530
~850
*
Z 0002
Washbasin81015.4
Order no. 81015.4Certified to DIN EN 32Dimensions 600 x 460 mmSpecification 1 centre tap holeWeight 15,0 kg Accessories excl. Syphon cover, order no. 81915.1
Pedestal, order no. 81915.0
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
Mounting acc. excl. Mounting set, order no. 89988.2 Colours see colour table
Order no. 81915.1matching for Washbasins order no. 81015.4 Weight 8,5 kg Mounting acc. incl. Device for fixing, order no. 89001.2 Colours see colour table
Order no. 81915.0matching for Washbasins order no. 81015.4 Weight 7,0 kgColours see colour table
Syphon cover81915.1
Pedestal81915.0
TECHNICAL DATA / SYPHON COVER TECHNICAL DATA / PEDESTAL
SET BATHLINE
12.2Z 0002
SET BATHLINE
12.3
365
700
15
215
390
5
185400
800
Z 0002
Floorstanding WC combination82315.0
Order no. 82315.0Certified to EN 997, EN 33Specification Washdown for 6-l-flush Outlet vertical Weight 20,0 kg Accessories excl. Cistern, order no. 82615.6
Seat and cover, order no. 89315.0
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAColours see colour table
SET BATHLINE
12.4
250
45
185400
405
Z 0002
Cistern82615.6
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAOrder no. 82615.6Certified to DIN 19542 matching for Floorstanding WC pan order no. 82315.0Specification Flushing mechanisme GEBERIT
water condensation insulationDual-Flush (3/6-l-flush)
Water inlet bottom Weight 13,5 kg
Colours see colour table
SET BATHLINE
Seat and cover89315.0
Order no. 89315.0matching for Floorstanding WC pan order no. 82315.0 Specification removableWeight 1,95 kg
TECHNICAL DATA
12.5Z 0002
Mounting set includedColours see colour table
SET BATHLINE
12.6
360
585
50
185
280150
395
100
Z 0002
Floorstanding bidet83015.1
Order no. 83015.1Specification 1 centre tap holeWeight 16,5 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAColours see colour table
A C C E S S O R I E SU N I V E R S A L
Order no. 87025.0Dimensions 400 x 135 mmWeight 2,0 kg
400
135
195*
60 35*
TECHNICAL DRAWINGS / S 1 : 10
TECHNICAL DATA
13.1Z 0002
ACCESSORIES
ShelfUNIVERSAL
87025.0
* = The exact measure must be determined at the installation.
Colours see colour table
Order no. 87025.2Dimensions 500 x 135 mmWeight 3,4 kg
500
135
255*
65 40*
TECHNICAL DRAWINGS / S 1 : 10
TECHNICAL DATA
13.2Z 0002
ACCESSORIES
ShelfUNIVERSAL
87025.2
* = The exact measure must be determined at the installation.
Colours see colour table
Order no. 87025.4Dimensions 600 x 140 mm Weight 3,4 kg
600
140
360*
65 50*
TECHNICAL DRAWINGS / S 1 : 10
TECHNICAL DATA
13.3Z 0002
ACCESSORIES
ShelfUNIVERSAL
87025.4
* = The exact measure must be determined at the installation.
Colours see colour table
Order no. 87025.5Dimensions 650 x 145 mm Weight 3,7 kg
650
145
405*
50*
75
TECHNICAL DRAWINGS / S 1 : 10
TECHNICAL DATA
13.4Z 0002
ACCESSORIES
ShelfUNIVERSAL
87025.5
* = The exact measure must be determined at the installation.
Colours see colour table
Order no. 87261.0Dimensions 140 x 95 mmWeight 0,8 kg
140
95
95
TECHNICAL DRAWINGS / S 1 : 10
TECHNICAL DATA
13.5Z 0002
ACCESSORIES
Toilet roll holderUNIVERSAL
87261.0
Mounting acc. includedColours see colour table
Order no. 87368.0Dimensions 105 x 180 x 90 mmWeight 1,1 kg
10590
50
180
TECHNICAL DRAWINGS / S 1 : 10
TECHNICAL DATA
13.6Z 0002
ACCESSORIES
Toilet brush holderUNIVERSAL
87368.0
Mounting acc. includedColours see colour table
U R I N A L S
14.1
745
65
650
400
650
ø35
250
500
150
25550
70
390
390
Z 0002
Syphonic urinal TARO-NOVA
84000.0
URINALS
Order no. 84000.0Certified to DIN 1390Water inlet concealedOutlet horizontal or verticalFlushing quantity minimum 1 lFlushing capacity minimum 0,3 l/sWeight 20,0 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAMounting acc. excl. horizontal inlet connection GEBERIT
no. 119 692 order no. 89900.6syphon with horizontal outlet GEBERITno. 152.942.11.1, order no. 89497.4syphon with vertical outlet and connection bend GEBERIT no.152.941.11.1, order no. 89903.8Stone screws, order no. 89406.0
Colours see colour table
14.2
745
650
65
400
720
90
55
ø35~280
ø9
250
150
25550
390
390
~40
Z 0002
Syphonic urinal
84000.5
URINALS
Order no. 84000.5Certified to DIN 1390Water inlet external Outlet horizontal or verticalFlushing quantity minimum 1 lFlushing capacity minimum 0,3 l/sWeight 20,0 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
TARO-UNI
Mounting acc. excl. vertical inlet connection GEBERIT no. 119 688, order no. 89900.7syphon with horizontal outlet GEBERITno. 152.942.11.1, order no. 89497.4syphon with vertical outlet and connection bend GEBERIT no.152.941.11.1, order no. 89903.8Stone screws, order no. 89406.0
Colours see colour table
14.3
640
65
650
345
~105
0
50
320
610
285
185
380
375
Z 0002
Syphonic urinal
84005.0
URINALS
Order no. 84005.0 Certified to DIN 1390Water inlet external Outlet horizontal or verticalFlushing quantity minimum 2 lFlushing capacity minimum 0,3 l/smatching for Corner urinal COMO order no. 84412.0Weight 16,5 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
KAPRUN
Mounting acc. excl. Syphon with horizontal or vertical outlet, order no. 89415.3vertical inlet connection GEBERIT no. 119 688, order no. 89900.7 mounting set no. 89406.0, Charge 063
Colours see colour table
14.4
770
650
65
400
650
ø35
70
250
500
150
50550
360
395
Z 0002
Syphonic urinal TAMARO
84009.0
URINALS
Order no. 84009.0Certified to DIN 1390Water inlet concealedOutlet horizontal or verticalFlushing quantity minimum 1 lFlushing capacity minimum 0,3 l/sWeight 21,5 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAMounting acc. excl. horizontal inlet connection GEBERIT
no. 119 692 order no. 89900.6syphon with horizontal outlet GEBERITno. 152.942.11.1, order no. 89497.4syphon with vertical outlet and connection bend GEBERIT no.152.941.11.1, order no. 89903.8Stone screws, order no. 89406.0
Colours see colour table
470
30
180
770
650
250
500
150
50550
1/2"
65400
650
70
360
395
14.5Z 0002
Syphonic urinal
84010.0
URINALS
Order no. 84010.0 / Charge 402Certified to DIN 1390 Specification incl. control system GEBERIT for batteryWater inlet concealed, 1/2“Outlet horizontal or verticalFlushing quantity minimum 1 lFlushing capacity minimum 0,3 l/sWeight 23,0 kgAccessories excl. GEBERIT Service-Handy, order no. 115.830
GEBERIT Clean-Handy, order no. 115.831
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
TAMARO-S60B
Mounting acc. incl. brass inlet R 1/2“, GEBERIT IR-electronic with 9V lithium battery
Mounting acc. excl. syphon with horizontal outlet GEBERITno. 152.942.11.1, order no. 89497.4syphon with vertical outlet and connection bend GEBERIT no.152.941.11.1, order no. 89903.8Stone screws, order no. 89406.0
Colours see colour table
770
650
250
500
150
50550
1/2"
65400
650
70
360
395
110
470
30
180
14.6Z 0002
URINALS
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAOrder no. 84010.2 Certified to DIN 1390 Specification incl. control system GEBERIT for netWater inlet concealed, 1/2“Outlet horizontal or verticalFlushing quantity minimum 2 lFlushing capacity minimum 0,3 l/sWeight 23,0 kgAccessories excl. GEBERIT Service-Handy, order no. 115.830
GEBERIT Clean-Handy, order no. 115.831
Syphonic urinal
84010.2TAMARO-S60
Mounting acc. incl. brass inlet R 1/2“, GEBERIT IR-electronic with plug and power supply
Mounting acc. excl. syphon with horizontal outlet GEBERITno. 152.942.11.1, order no. 89497.4syphon with vertical outlet and connection bend GEBERIT no.152.941.11.1, order no. 89903.8Stone screws, order no. 89406.0
Colours see colour table
14.7
670
70
650
7540
0
825
85
1/2"
658
258
100
200120395
365
390
Z 0002
Syphonic urinal
84012.2
URINALS
Order no. 84012.2Certified to DIN 1390Specification incl. control system GEBERIT for main circuit
connectionWater inlet concealed, 1/2“Outlet horizontal Flushing quantity minimum 2 lFlushing capacity minimum 0,3 l/sWeight 28,0 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
TAMARO-VS
Accessories incl. Control system with all mounting accessoriesconcealed water inlet, horizontal outlet
Accessories excl. Concealed electric socket to urinal, order no. 89412.6(To be installed by raw installation)
Colours see colour table
14.8
650
465
375
1200
415 4563
0
365
240
305
285
Z 0002
Syphonic urinal
84014.1
URINALS
Order no. 84014.1Certified to DIN 1390Specification Only to be used with coverWater inlet concealedOutlet horizontalFlushing quantity minimum 2 lFlushing capacity minimum 0,3 l/sWeight 10,0 kgAccessories excl. Cover for urinal, order no. 89414.1
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
CASA
Mounting acc. incl. Fixing srews, order no. 89553.8Mounting acc. excl. Syphon with concealed outlet,
order no. 89415.3horizontal inlet connection GEBERITno. 152 489, order no. 89009.7
Colours see colour table
Order no. 89414.1matching for Syphonic urinal CASA, order no. 84014.1Weight 2,5 kg
Cover for urinalCASA
89414.1
URINALS
TECHNICAL DATA
14.9Z 0002
Mounting acc. includedColours see colour table
14.10
35
65
650
430
400
270
660
240540
170
325
305
340
Z 0002
Syphonic urinal CAPRINO
84406.0
URINALS
Order no. 84406.0 Certified to DIN 1390Specification Charge 400 with flyWater inlet concealedOutlet horizontal or verticalFlushing quantity minimum 2 lFlushing capacity minimum 0,3 l/sWeight 12,1 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAMounting acc. excl. Syphon with horizontal or vertical outlet,
order no. 89415.3horizontal inlet connection GEBERITno. 152 489 order no. 89009.7mounting set no. 89406.0, Charge 063
Colours see colour table
14.11
660
65
650
400
270
~100
0
50
240540
325
310
340
Z 0002
Syphonic urinal
84406.1
URINALS
Order no. 84406.1Certified to DIN 1390Specification Charge 420 incl. control system WIMTEC for
battery includedCharge 400 with fly
Water inlet externalOutlet horizontal or verticalFlushing quantity minimum 2 lFlushing capacity minimum 0,3 l/sWeight 12,1 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
CAPRINO
Mounting acc. incl. only Charge 420Syphon with horizontal or vertical outlet, order no. 89415.3mounting set no. 89406.0, Charge 063
Mounting acc. excl. Syphon with horizontal or vertical outlet, order no. 89415.3vertical inlet connection GEBERIT no. 119 688, order no. 89900.7 mounting set no. 89406.0, Charge 063
Colours see colour table
14.12
450
610
60
285
185
650
~105
0
340
90
50
65
Z 0002
Syphonic corner urinal COMO
84412.0
URINALS
Order no. 84412.0 Specification Charge 400 with flyWater inlet external Outlet horizontal or verticalFlushing quantity minimum 2 lFlushing capacity minimum 0,3 l/smatching for Syphonic urinal KAPRUN, order no. 84005.0Weight 14,0 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAMounting acc. excl. Syphon with horizontal or vertical outlet,
order no. 89415.3vertical inlet connection GEBERIT no. 119 688, order no. 89900.7Brackets, order no. 89840.0
Colours see colour table
1380
650
80
730
590
35
760
400
14.13Z 0002
Urinal division
84760.0
URINALS
Order no. 84760.0Weight 14,0 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
RION
Mounting acc. incl. Fixing device, order no. 89980.0Colours see colour table
S P E C I A L A R T I C L E S
165
60
625
660
195
550
300
280
50
190
850
625
SPECIAL ARTICLES
Washbasin for handicappedREHAB
15.1Z 0002
81060.3
Order no. 81060.3Dimensions 660 x 550 mmSpecification without tap hole
without overflowSpecial specification 1 centre tap holeWeight 17,0 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATAMounting acc. excl. Mounting set, order no. 89988.2
Concealed syphon GEBERIT, order no. 151.112.21.1
Colours see colour table
505
510
300
8562
5 710
75
120
590
ø102
300
350
ø55 60
30
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
15.2Z 0002
SPECIAL ARTICLES
Wall sink
85421.0
Order no. 85421.0Dimensions 505 x 510 mmWater inlet concealedOutlet concealedFlushing quantity minimum 8 lFlushing capacity minimum 2,1 l/sWeight 25 kg
BERNINA
Accessories excl. Grating, order no. 89947.0Screws to grating, order no. 89949.0
Colours see colour table
SPECIAL ARTICLES
School washbasin
15.3
600
210
455
240 280
600
210
455
300
120
55
200
225
850
500
Z 0002
85760.0
Order no. 85760.0Dimensions 600 x 450 mmSpecification without tap holeSpecial specification Charge 104 – 1 centre tap hole
Charge 503 – 1 centre tap hole middle basinWeight 20,5 kg
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
COLLEGE
Charge 503 Charge 104
Mounting acc. excl. Mounting set, order no. 89988.2Colours see colour table
TECHNICAL DRAWINGS / S 1 : 20
TECHNICAL DATA
15.4Z 0002
SPECIAL ARTICLES
Wallhung WC for children
320
525
180
320
220 35
5
55
6535
0
60
15
BAMBI82185.0
Order no. 82185.0Specification Washdown for 6-l-flush
Seating height 350 mmWeight 14,0 kgAccessories excl. WC seat and cover, order no. 89065.7
Colours see colour table
SPECIAL ARTICLES
Seat and cover BAMBI
89065.7
Order no. 89065.7matching for Wallhung WC pan order no. 82185.0Weight 1,3 kg
TECHNICAL DATA
15.5Z 0002
Mounting set includedColours see colour table
Technical catalogue
LAUFEN Austria
ÖSPAGÖsterreichische Sanitär-, Keramik- und Porzellan-Industrie AG Färbergasse 11, P.O.Box 62A - 3150 WilhelmsburgTelephon ++43-2746-6060Fax ++43-2746-6060-52Internet: www.laufen.com