Teaching Notes 1

Mohammed Asif

Name :

Roll No. :

Topic : Optics

Ph : 9391326657, 64606657

Teaching Notes (Optic)

The study of light and vision is called optics.Light is a form of energy which is propagated as Electromagnetic waves which produces the sensation of sight in us.

Geometrical optics treats propagation of light in terms of rays and is valid only if wavelength of light much lesses than the size of obstacles. i) Light does not require a medium for its propagation ii) It’s speed in free space (vaccum) is 3 x 108m/siii) It is transverse in natureIn the spectrum of e.m.w. it lies between u.v. and infra-red region and has wavelength between

4000 to 7000 . i.e

Indigo is not distensible from blue.

BASIC - DEFINATIONS Source:

A body which emits light is called source. Source can be a point one (or) extended one.(a) Self-luminous-source: The source which possess light of it own.

Ex:- Sun, Electric arc, Candle, etc.

Flat No.301, Rukkus & Yellus Arcade, Fever Hospital Road, Barkathpura, Hyd-500065. 1 Ph: 040 – 64606657, 9391326657. www.asifiitphysics.vriti.com

http://www.asifiitphysics.vriti.com/

(b) Non-luminous-Source: It is a source of light which does not possesses light of its own but acts as source of light by reflecting the light received by it.Ex: Moon, object around us, Book…….etc.

Isotropic Source: It gives out light uniformly in all directions.Non-isotropic Source: It do not give out light uniformly in all direction.Medium: Substance through which light propagates is called medium

Ray: The straight line path along with the light travels in a homogeneous medium is called a ray. A single ray cannot be propagated form a source of light.Beam: A bundle can bunch of rays is called beam it is called beam it is of following 3 typesConvergent-beam: In this case diameter of beam decreases in the direction of ray

Divergent Beam: It is a beam is with all the rays meet at a point when produced backward and the diameter of beam goes on increasing as the rays proceed forward.

Parallel Beam: It is beam in which all the rays constituting the beam move parallel to each other and diameter of beam remains same

Object: An optical object is decided by incident rays only. It is if two kindsReal Object: In this case incident rays are diverging and point of divergence is the position of real object.



Virtual Object: In this case incident ray are converging and point of convergence is the position of virtual object. Virtual object cannot be seen by human eye be cause for an object can image to be seen by eyes, ray received by eyes must be diverging.

Image: An optical image is decided by reflected (or) refracted rays only. It is of two types. (a) Real Image: This is formed due to real intersection of reflected (or) refracted rays, Real image can be obtained on screen.

Virtual-Image: This is formed due to apparent intersection of reflected (or) refracted light rays. Virtual image can’t be obtained on screen. (Note: Human ray can’t distinguish between real and virtual image because in both case rays are diverging)

REFLECTION:

The phenomenon by virtue of which incident light energy is partly or completely sent back into the same medium from which it is coming after being obstructed by a surface is called reflection.



The direction of incident energy is called incident ray and the direction in which energy is thrown back is called reflected ray. It is of two types.

LAWS OF REFLECTION:1) First Law: The incident ray, the reflected ray and the normal to the reflecting surface at the point of incidence, all lie in one plane which is to the reflecting surface.2) The angle of incidence is equal to the angle of reflection .Note: 1) The laws of reflection are valid for any smooth reflecting surface irrespective of geometry.

2) Whenever reflection takes place, the component of incident ray parallel to reflecting surface remains uncharged, while component perpendicular to reflecting surface (i.e. along normal) reverse in direction.

,



3) Vector form of laws of Reflection:

Unit vector along the reflected ray

Unit vector along the Incident ray

Unit vector along the normal ray

Image formed by a plane mirror:a) Point Source: For construction of image of a point source it is sufficient to consider any two rays falling on mirror. The point of intersection of corresponding reflected rays give the position of image as shown in figure.

OA = AI

Image I lies as much behind the mirror as the object is in front of it.

b) Extended source:

Characteristics of the image formed by a plane mirror:1) The image formed by a plane mirror is Virtual2) The image formed by a plane mirror is Erect3) The image formed by a plane mirror is of same size as object.4) The image formed by a plane mirror is at the same distance behind the mirror is the object is

infront of it. 5) The image is laterally inverted (i.e.) right appear as left and vice-versa.



6) Note: If two plane mirror faring each other are inclined at an angle with each other, then number of images are formed due to multiple reflection. This principle is used in the toy

kaleidoscope.

(a) If is even integer, then number of images formed is

Ex: If then

(b) If is odd integer, then number of images formed is

Ex: If (which is not the complete part of 1800) then

Deviation ( ): The angle between incident and reflected (or) refracted ray is termed as deviation.For reflection

Cases: When i = 0 (Normal incidence)

When (Grazing incidence)

Multiple Reflection: = deviation due to single reflection.

Note while summing up, sense of rotation is taken into account.

Q: 1) Two plane mirror are inclined to each other such that a ray of light incident on the first mirror and parallels to the second is reflected from the second mirror parallel to the first mirror.



Determine the angle between the two mirror. Also determine the total deviation produced in the incident ray due to the two reflections.

Solution:

From figure

A.C.W.

Or From fig.

Q: 2) Calculate deviation suffered by incident ray in situation as shown in figure, after three successive reflections?

Solution: F,B.D



Q: 3) Two plane mirrors are inclined to each other at an angle . A ray of light is reflected first at one mirror and then at the other. Find the total deviation of the ray?

Solution: Let Angle of incidence for M1

Angle of incidence for M2

Deviation due to M1

Deviation due to M2

From figure

Also ray is rotated in same secure (i.e.) anticlockwise Now in

Velocity of Image:Let

xO/m = x-co-ordinate of object w.r.t. mirrorxI/m = x-co-ordinate of image w.r.t. mirroryO/m = y-co-ordinate of object w.r.t. mirroryI/m = y-co-ordinate of image w.r.t. mirror

For plane mirror

xO/m = -xI/m

Differentiating both sides w.r.t. time (t)



Similarly yI/m = yO/m

Differentiating both sides w.r.t. time we get

In nutshell, for solving numerical problems involving calculation of velocity of image of object with respect to any observer, always calculate velocity of image first with respect to mirror using following points.

Velocity of image with respect to required observer is then calculated using basic equation for relative motion.

Note: If the velocity of the object (w.r.t mirror) is not in a direction normal to the mirror, then the velocity of the object can be resolved into two components one normal to the mirror (vn) and the other along the mirror (vp). The image has velocities –Vn and VP, normal to and along the mirror.

Q: 1) Point object is moving with a speed V before an arrangement of two mirrors as shown in figure. Find the velocity of image in mirror M1 w.r.t. image in mirror M2?

Solution: =

F.B.D



Angle between Is their magnitude is V.

Q: 2) Find the velocity of image of a moving particle in situation as shown in figure.Solution: Analysis:

For component of velocity of image to mirror

For component of velocity of image parallel to the mirror

Velocity of time

Q: 3) Two plane mirror are placed as shown in the figure below:



A point object is approaching the intersection point of mirror with a speed of 100cm/s. The velocity of the image of object formed by M2 w.r.t. velocity of image of object formed by M1 is:

Solution: The components of various velocities are as shown in the figure below

is given by the vector sum of components of velocity of image w.r.t. M2 along the normal

and to the normal.

Q: 4) In the situation show in figure, find the velocity of image?

Solution: Along x – direction, applying



Along y-direction V0 = Vi

Velocity of the image

Q: 5) An object moves with 5m/s towards right while the mirror moves with 1m/s towards the left as shown. Find the velocity of image.

Solution: Take as +ve direction.

and direction towards left.

Q: 6) Find the region on y-axis in which reflected rays are present object is at A(2, 0) and MN is a plane mirror, as shown

Solution:



Q: 7) An object moves towards a plane mirror with a speed v at an angle 600 to the to the plane of the mirror. What is the relative velocity between the object and the emage?

a) b) c) d)

Solution:

Q: 8) A ray of light making angle 200 with the horizontal is incident on a plane mirror with itself inclined to the horizontal at angle 100, with normal away from the incident ray. What is the angle made by the reflected ray with the horizontal?



Solution: AO = Incident rayOB = Reflected ray

The reflected ray goes along the horizontal. Hence angle made by the reflected ray with the horizontal is zero.

Q: 9) A ray of light making angle 100 with the horizontal is incident on a plane mirror making angle with the horizontal. What should be the value of , so that the reflected ray goes vertically

upwards?a) 300 b) 400 c) 500 d) 600

Solution:

Number of Images Formed by two Inclined-Plane Mirrors:a) When mirror are parallel: In this case, infinite images are formed due to multiple reflections.



b) When mirror are perpendicular: In this case, three images are formed. The ray diagram is shown.

Note that the third image is formed due to rays undergoing two successive reflection. Also, object and its images lie on a circle whose equation is given by .When an object is placed in front of arrangement of three mutually perpendicular mirror, then total seven images are formed.Further, object and its image lie on a sphere whose equation is given by , where a, b and c are co-ordinates of object.

Minimum size of Mirror to see Full-Image:

AB is the person with E as his eyes, M1 M2 = plane mirror infront of him.For the length of the mirror to be minimum, the rays coming from the extreme top and bottom portions of his body. (i.e.) A and B, Should after reflection, be able to just enter his eyes.The light ray AM, is incident ray and M1E the reflected ray.So As are similar.

……..(1)

Similarly the light rays BM2 and M2E are incident and reflection rays respectivelySo

are similar



………(2)

Adding equation (1) and (2) yield

length of mirror (Height of person)

Note:- Minimum size is independent of distance between man and mirror.

Q: 1) A plane mirror is inclined at an angle with the horizontal surface. A particle is projected from point P (see fig.) at t = 0 with a velocity v at angle with the horizontal. The image of the particle is observed from the frame of the particle projected. Assuming the particle does not collide the mirror, find the (a) time when the image will come momentarily at rest w.r.t. the particle (b) path of the image as seen by the particle.

Solution:(a) The image will appear to be at rest w.r.t. the particle at the instant, the velocity of the particle is parallel to the mirror.

(b) St. line to mirror

Q: 2) An a oblong object PQ of height ‘h’ stands erect on a flat horizontal mirror. Sun rays fall on the object at a certain angle. Find the length of the shadow on screen placed beyond the shadow on the mirror.

Solution: PS = Shadow on the mirror

P’ Q’ = Inversed shadow of PQ on the screen



Let angle of incidence Then PS = h tan and QS = h secFrom the properly of image P’ Q’ =

Q: 3) A plane mirror is placed at parallel of y-axis, facing the positive x-axis. An object starts form (2m, 0, 0) with a velocity of . The relative velocity of image with respect to object is along

Solution:

Relative velocity of image with respect to object is in negative x-direction as shown in figure.

Q: 4) A reflection surface is represented by the equation . A ray traveling in negative x-direction is directed towards positive y-direction after reflection from the surface at some point ‘P’. Then co-ordinates of point ‘P’ are

Solution: From figure



Q: 5) A ray is traveling along x-axis in negative x-direction. A plane mirror is placed at origin facing the ray. What should be the angle of plane mirror with the x-axis so that the ray of light offer reflecting from the plane mirror passes through point (1m, )?

Solution:

Q: 6) Two plane mirror A and B are aligned parallel to each other as shown in the figure. A light ray is incident at an angle 300 at a point just inside one end of A. The plane of incidence coincides with the plane of the figure. The maximum number of times the ray undergoes reflection (including the first one) before it emerges out is____

Solution:

REFLECTIN FROM CURVED SURFACE: (Spherical – Surface only)



A curved mirror is a smooth reflecting part of any geometry. The nomenclature of curved mirror depends on the geometry of reflecting surface. There are different types of curved mirror like paraboloidal, ellipsoidal, cylindrical, spherical ….etc.

Sign-Conversion:

Rules for Ray-Diagrams1) A ray of light parallel to principal axis passes (or) appears to pass through four after reflection.



2) A ray of light passing through focus (or) appears to pass through focus becomes parallel to principal-axis after reflection.

3) A ray of light passing through (or) appears to pass through centre of curvature is reflected back.

4) A ray of light hitting pole is reflected making equal angle with principal oxis

Note: 1) Focal length and radius of curvature of plane mirror = 2) Concave mirror = Convergent mirror Convex mirror = Divergent mirrorRelation between focal-length and radius of curvature:

Both for concave and convex mirror.

Mirror formula (or) Mirror Equation:The relation between u, v and f of a mirror is known as mirror formula

Relation between the speeds of object and image formed by a spherical mirrorWe know that, mirror formula is given by



……….(1)

Differentiating both sides w.r.t. time (t), we get

…………(2)

Since

………….(3)

From equation (1),

Hence equation (2) become

0.vfu

fvi

Linear magnification: It is defined as the ratio of the size (or) height of the image to the size (or) height of the object.

Magnification produced by concave mirror:

image of object AB and are similar

…………(1)

Applying sign conversion

Equation (1) can be rewritten as



same for convex-mirror also.

Magnification in terms of u, v and f

a) As we know that

Multiplying both sides by ‘u’ we get

Since

b) As we know that

Multiplying both sides by V, we get

Since

Note: a) +ve magnification mean both object and image are upright b) –ve magnification means, object and image have different orientation (i.e.) if object is

upright, then image is inverted.

LATERAL-MAGNIFICATION (mL)



For extended objects the lateral magnification can be obtained by independently imaging the two end points and calculating the length of the image. There is no direct formula to obtain the magnification.However, if the length of the object is small, them the lateral magnification can be directly obtained from equation

Differentiating both sides, we get

Q: 1) What do we do if the size of the object is large as compared to the distance u?Analysis:For extended object

For tip A

from which VB can be obtained

Subtracting VB from VA, we can calculate the length of the image.

Combinations of mirrors:What do we do if we have a combination of mirror? If an object is placed between the mirrors, how do we find the final position of he image?Analysis: In such situations, we need to simply solve for the reflection at each of the mirror keeping in mind that the image formed by the first mirror is the object of the second mirror and so on.Case must be taken to correctly apply the sign conversion at each of the mirror.



Q: 1) Find the velocity of image in situation as shown in figure?

Solution:

m/s

= -(-2)2 11

= -44 m/s.

Q: 2) A thin rod of length is placed along the principal axis of a concave mirror of focal-length ‘f’

such that its image just touches the rod, calculate magnification?Solution: Since image touches the rod, the rod must be placed with one end at centre of curvature.

Case –I Case –II



CONCEPTUAL POINTSIt a hole is formed at the center of mirror, the image position and size will not change.The intensity will reduce depending on the size of the hole.For all object positions a convex-mirror forms a virtual and erect image

PROBLEMS OF MIRRORS Q: 1) A short linear object of length ‘b’ lies along the axis of a concave mirror of focal-length f, at a

distance u from the mirror. The size of image approximately is

Solution:



Q: 2) Two spherical mirrors M1 and M2 one convex and other concave having same radius of curvature R are arranged coaxially at a distance 2R (consider their pole separation to be 2R). A bead of radius a is placed at the pole of the convex mirror as shown. The ratio of the sizes of the first three images of the bead is

Solution: The first image is formed due to the reflection from concave mirror M2

.

object distance



So radius of second image

Similarly radius of third image is

Answer

Q: 3) When an object is placed at a distance of 60cm from a convex spherical mirror, the magnification produced is 1/2. where should the object be placed to get a magnification of 1/3?

Solution:

(or)

In second case

As

Q: 4) Two objects A and B when placed one after another in front of a concave mirror of focal-length 10cm, form images if same size. Size of object A is 4 times that of B. If object A is placed at a distance of 50cm from the mirror, what should be the distance of B from the mirror?

Solution: For object A For object B

As and ,

Q: 5) A concave mirror of focal length 10cm is placed at a distance of 35cm form a wal. How far from the wall should an object be placed to get in image on the wall?



Solution:

Distance of the object form wall = 35 – 14 = 21 cm

Q: 6) An object is placed at a distance of 36cm form a convex mirror. A plane mirror is placed in between so that the two virtual images so formed coincide. If the plane mirror is at a distance if 24cm from the object, find the radius of curvature of the convex mirror.

Solution:

Q: 7) A convex mirror of focal length ‘f’ forms an image which is times the object. The distance of

the object which is times the object. The distance of the object from the mirror is



Solution:

Q: 8) An object of size 7.5cm is placed in front of a convex mirror of radius of curvature 25cm at a distance of 40cm. The size of the image should be

Solution:

Q: 9) The image formed by a convex mirror of focal length 30cm is a quarter of the size of the object. The distance of the object from the mirror is

Solution:

Q: 10) A concave mirror of focal length f (in air) is immersed in water . The focal length of the mirror in water will be

a) b) c) d)

Solution: On immersing a mirror in water, focal length of the mirror remains uncharged.

Q: 11) An object is 20cm away form a concave mirror with focal-length 15cm. If the object moves with a speed of 5m/s along the axis, then the speed of the image will be

Solution:



Q: 12) A concave mirror is placed at the bottom of an empty tank with face upwards and axis vertical when Sun-light falls normally in the mirror, it is focused at distance of 32cm form the mirror. If

the tank filled with water upto a height of 20cm, then the Sunlight will now get focused

at Ans: 9cm above water level

Q: 13) A small piece of wire bent into an ‘L’ shape with upright and horizontal portions of equal-lengths, is placed with the horizontal portion along the axis of the concave mirror whose radius of curvature is 10cm. If the bend is 20cm from the pole of the mirror, then the ratio of the lengths of the images of the upright and horizontal portions of the wire is

Solution:

For part PQ

For part QR

CONCEPT OF NEWTON’S FORMULA (FOR A MIRROR)In this formula, the object and image distance are expressed w.r.t. focus. Consider an object O kept beyond ‘C’ of a concave mirror, and whose image is formed at I with in C.



Let OF = x and IF = yFrom triangle OMC

…………(1)

And from triangle ICM

………….(2)

Dividing equation (1) and (2) yields

(since M is close to P)

(or)

(or)

1) As (or)

(i.e.) The distance of object and image form the focus are inversely proportional to each other. In other words, the more the object distance (from the focus), the less will be the image distance (from the focus) and vice versa

2) If and if . If the object is at focus the image is a far off distance and vice-versa.

3) From , then .Thus, if the object be at C, then image will also be at C (for a concave mirror) and if the object is at P, then the image will also be at P (for a convex mirror)

4) Since is necessarily +ve for both types of mirror, so x and y bear the same sign, which implies that both the object and the image always lie an the same side of focus.

A) GRAPH OF | x | Versus | y | : Since represents a rectangular hyperbola, existing in the first and third quadrant ( being positive).

The graph of |y| vs |x| will be a rectangular hyperbola existing only in the first quadrant.



B) GRAPH OF U Versus V :Since

For a convex mirror, u is always negative and V is always positive. Further ‘f’ is also positive. Putting and we have

This is the equation of a rectangular hyperbola with its origin shifted to and ’x’ being always negative while y lies between O and f. (see figure) for a concave mirror, u is always negative, v can be positive (or) negative, ‘f’ is negative

We have, form

OrEvidently it is again an equation of a rectangular hyperbola with origin of coordinates shifted to the point (-f, -f) (see figure )



3) GRAPH OF VERSUS

From mirror formula

Putting and , we have

It is the equation of a straight line having a slope +1 (or) -1 according as u and v bear the same

(or) opposite signs. The intercepts on x and y axis are each according as the

object and image are to the right (or) left of the mirror.For a concave mirror:u is always –vev can be positive (or) negative and f is –ve.

For a convex mirror u is always negative v is always positive and f is always positive.



CONCEPT OF CRITICLA ANGLE When a ray of light is traveling form denser medium to rarer medium, it get refracted and the ray derivates away form the normal.If we keep increasing angle of incidence then at an angle, the angle of refraction becomes 90 0 . This is known as Critical –Angle (c).When angle of incidence is increased, further the ray gets reflected back in the same medium. This phenomena is known as T.I.R.

According to Snell’s Law

C depends on colour and and tempCRed > Cviolet CRed < Cviolet

If temp Q: 1) The sum (diameter d) subtends an angle radius at the pole of a concave mirror of focal length

f. Find te diameter of the image of sun formed by mirror?

Solution: we get



( u is very large so

Or It means image is formed at focusTaking as radius and using

REFRACTION AT SPHERICAL SURFACE:

From OBC and IBCWe have And From Snell’s law

For small angle of incidence I, we can write As ‘i’ is small, and so are also small. Thus



And

After simplifying we get

This formula is derived for convex surface and for real

ImageFrom denser to rarer medium

Q: How can we derive a mathematical expression for the equation of a ray in the medium? The medium is of variable refractive index. Ray of light is incident at an angle at air medium interface?Analysis: Here two cases a rise. Refractive index is varying either as function of y (or) function of x.Case-I: Refractive index varies with yAt some height h angle of incidence is and refractive index is from Snell’s Law

constant……..(1)

Slope of curve at A



From equation (1)

Case-I: Refractive index varies as function of x. According to Snell’s Law

constantFor initial refraction at the air medium interface

Here angle of refracting ray at point A with OX

So

And

Now Snell’s Law at M gives

Or

Now slope of tangent at M is given as

Q: 1) If and ray of light is incident at grazing incidence at origin, then find equation of path of refracted ray.



Solution: We can use result derived above for which

So

Q: 2) An object is at a distance 25cm form the curved surface of a glass hemisphere of radius 10cm. Find the position of the image and draw the ray diagram

Solution: For refraction at first face

R = 140cm

The rays are converging beyond of at 140cm form Q. Again refraction takes place at the plane surface.For refraction at second face

Using

The ray meet axis at 93.3cm form point Q.

PROBLEMS ON REFRACTION



1) A light ray is incident at an angle of incidence double that of refraction on one face of a parallel sided transparent slab of refractive index and thickness ‘t’. Find the lateral displacement of the ray?

Solution:

As

Q: 2) A light ray is incident on a transparent slab of R. I. , at an angle of incidence . Find the ratio of the lateral displacement suffered by the light ray to the maximum value which it could have suffered?

Solution:



Q: 3) Light of a certain colour has 2000 waves in one millimeter of air. Find the number of waves of that light in one millimeter length of water and glass respectively?

Solution: wavelength in air wavelength in medium

The number of waves of that light in a length of ‘d’ will be

And

in water in glass

Q: 4) Light from a sodium-lamp traverses a distance of 60m in a chloroform in a certain time. Determine the time difference occurring when light happens to traverse the same length in ethyl ether

Solution:

For ethyl ether

Q: 5) A rectangular glass slab of thickness 12cm is placed over a small coin kept on a table. A thin transparent beaker filled with wager to a height 6cm & placed over the block. Find the apparent shift of the position of the coin, when viewed from a point directly above it?



Solution:

= 1.5 cm

Q: 6) The time taken by light to cover a distance of 9mm in water is____

Solution:

Q: 7) A ray incident at an angle of incident 600 enters a glass – sphere of R.I . The ray is reflected and reflected and refracted at the farther surface of the sphere. The angle between reflected and refracted rays at this surface is_____

Solution:



PC = QC

Angle between reflected ray QR and refracted ray QS at the other face

REFRACTION AT SPERICAL SURFACESQ: 1) Sunshine recorder globe of 30cm diameter is made of glass of refractive index . A ray

enters the globe parallel to the axis. Find the position from the centre of the sphere where the ray crosses the principal axis?

Solution:

For first refraction (Rares to deuces)

For second refraction (douses to rarer)



Using

Distance of image from centre of globe is (15 + 7.5) = 22.5cm

Q: 2) A particle executes a simple harmonic motion of amplitude 1.0cm along the principal axis of a convex lens of focal length 12cm. The mean position of oscillation is at 20cm from the lens. Find the amplitude of oscillation of the image of the particle?

Solution: When the particle is

At R

When the particle is at left extreme position

Amplitude of oscillation of image

Q: 3) A point object is moving with velocity 0.01m/s on principal axis towards a convex lens of local-length 0.3m when object is a distance of 0.4m form the lens, finda) Rate of charge of position of the image andb) Rate of charge of lateral magnification of image



Solution: Differentiating the

a) Equation w.r.t. time

b)

Q: 4) Find the position of the image formed by the lens combination given in figure?

Solution: Image formed by first lens



The image formed by the first lens server as the object for the second.This is at a distance of (15 – 5)cm i.e. 10cm to the right of the second lens. It is a virtual object

Now

The virtual image is formed at an infinite distance to the left of the second lens. This acts as an object for the third lens.

The final image is formed 30cm to the fight of the third lens.

Q: 5) Two Plano-concave lenses of glass of refractive index 1.5 have radii of curvature 20cm and 30cm respectively. They are placed in contact with the curved surfaces towards each other and the space between them is filled with a liquid of refractive index 5/2. Find the focal length of the combination.

Solution: For first plano concave lens

For second plano concave lens

The focal length of the liquid lens is given by

R1 = 20cm, R2 = 30cm



Q: 6) Given the object image and principal axis find the positions and nature of the lensSolution: First join the object and image

If the one point is above the optical axis and the other below it, then the lens is always a convex lens.

If object and image points areAbove the principal axis and image point is higher, then the lens is convex and is present between the image and object points. Other wise the lens is concave.

Q: 7) For the given positions of the objects and the image in figure determine the location and the nature of the lens used?

Solution:

Q: 8) A ray of light passes through a medium whose refractive index varies with distance as

. If the ray enters the medium parallel to the x-axis, what will be the trajectory of

the ray and what will be the time taken for the ray to travel a distance a?Solution: The ray enters normally and proceeds along a straight line. At a distance ‘x’ in the

medium consider a slab of thickness “dx”. Velocity of the light ray at this point is



Time taken to cross the distance ‘dx’ is

Total time of travel is

Q: 9) A fish is rising up vertically inside a pond with velocity 4cm/s and notices a bird which is diving vertically downward and in velocity appears to be 16cm/s (to the fish). What is the velocity of the diving bird, if R. I of water is 4/3?

Solution:

Q: 10) Solar rays are incident at 450 on the surface of water . What is the length of the shadow of a pole of length 1.2m erected at the bottom of the pond, if the pole is vertical assuming that 0.2m of the pole is above the water surface?

Solution: Applying Snell’s law at point c



Here

The length of shadow = AB = AE + EB = 0.2+0.625 = 0.825Q: 11) In a lake, a fish rising vertically to the surface of water uniformly at the rate of 3m/s, observes a

bird diving vertically towards the water at a rate of 9m/s vertically above it. The actual velocity of the dive of the bird is_______

Solution:



Differentiating

Q: 12) A convex lens of focal length 0.2m is cut into two halves each of which is displaced by 0.0005m and a point object is placed at a distance of 0.3m form the lens, as shown in figure. The position of the image is ________

Solution:

Q: 13) A pole 5m high is situated on a horizontal surface. Sun rays are incident at an angle 300 with the vertical. The size of shadow in horizontal surface is______

Solution:



Q: 14) The Sun subtends an angle at the pole of a concave mirror. The radius is curvature of concave mirror is R = 1.5m. The size of image formed by the concave mirror is_____

Solution: As Sun is at infinity image is formed at the focus of mirror

1)

= 0.654 cm

Or

magnification



MAGNIFICAIOTN IN CASE OF CURVED SURFACE:Consider an extended object “QO” placed to the principal axis at the point O. The image of the point ‘O’ is formed at I. Image of extended object is ‘IQ’

From we can say that

and

But since are very small, we can approximate Also Sign conversion

LATERAL MAGNIFICATION

The lateral magnification is

Which can be obtained by differentiating equation

Thus

REFRACTION AT PRISMA prism is a portion of a transparent medium bounded by two plane faces inclined to each other at a suitable angle.a) Calculation of angle of Derivation:



In passing through the prism, ray KL suffers two refractions and has tweed through an . (with is angle of direction)

In ,

……………(1)In

……………(2)In Quadrilateral ALOM,As ( Sum of 4 angles of a Quad = 360)

using equation (2) we can write

…………….(3)Putting (3) in (1)

……………(4) (for bigger refracting angles) If is the refractive index of the material of the prism, then according to Snell’s Law

(when angles are small)

similarly Putting the above two in equation (4) we get

(when refracting angle are small)This is the angle through which a ray derivate on passing through a thin prism of small refracting angle A.

Prism formula:In minimum derivation position

i1 = i2 = i and r1 = r2 = r from equation (3)



And from equation (4)

from Snell’s Law

Note : The deviation through a prism is maximum when i1 = 900. Thus

MAXIMUM DEVIATION:

For

At surface BD

We know that

For surface CD



CONCEPT: Sometimes a part of a prism is given and the keep on thinking whether how should we proceed? To solve such problems first complete the prism then solve as the problems of prism are solved

Defects in Image formed by leuses:The defect in the lens on account of which it does not form a white point image of white point object is defined as Aberration.

Axial Chromatic Aberration: The variation of the image distance form the lens with the colour measures axial chromatic Aberration.Lateral Chromatic Aberration: The variation in the size of the image with colour measures the lateral transverse chromatic aberration.

Concept of Dispersion of Light:

Dispersion of light is the phenomenon of splitting of a beam of white light into its constituent colours on passing through a prism. (accuse due to wavelength).The band of seven colours so obtained is called the visible spectrum.The order of colours from the lower end of spectrum is “VIBGYOR”.Violet colour deviates through maxi. Value and red colour deviates through the minimum angle.

Causes of Dispersion: Each colour has in own wavelength according to Cauchy’s formulaR.I. of a material depends on wavelength



For a prism of small refracting angle of deviation is Angular dispersion: It is the angle in which all colous of white light are contained dv = deviation of violet colourdr = deviation of red colour

Angular dispersion = dv - dr

As

Dispersive Power (w): Ratio of angular deviation to the mean position produced by the prism.

Note: Single prism produces both deviation and dispersion simultaneously. It cannot give deviation without dispersion (or) dispersion without deviation. However a suitable combination of two prisms can do so.Dispersion of light occurs because velocity of light in a material depends upon its colourThere is no dispersion of light refracted through a rectangular glass slab.

Combinations of prim:I) Deviation without dispersion: Net dispersion = 0, Net deviation 0Necessary condition

In this Situation

Net deviation =



Usually so is in the same direction as produced by the first prism.The prism which produces deviation without dispersion is called achromatic prism.

II) Dispersion without deviation:Net deviation = 0, Net dispersion 0Necessary condition

In this situation

Net dispersion

If , the resultant dispersion is negative. (i.e.) opposite to that produced by the first prism. This prism which produces dispersion without derivation is called direct vision prism.

Q: 1) A prism having an apex angle 40 and refractive index 1.5 is located in front of a vertical plane mirror. Through what total angle is the ray deviated after reflected form the mirror?Solution:



Q: 2) A container contains water upto a height of 20cm and there is a point source at the centre of the bottom of the container. A rubber ring of radius ‘r’ floats centrally on the water. The ceiling of the from is 2.0m above the wager surface. (a) Find the radius of the shadow of the ring formed on the ceiling if r = 15cm.(b) Find the maximum value of ‘r’ for which the shadow of the ring is formed on the ceiling

?Solution: a) Using Snell’s Law

Radius of shadow =

b) For shadow to be formed angle of incidence should be less than critical angleusing Snell’s Law



Q: 3) Monochromatic light falls on a right angled prism at an angle of incidence 450. The emergent light is found to slide along the face AC. Find the refractive index of material of prism?

Solution:

………..(1)

………..(2)

and

Snell’s law AR





Teaching Notes 1

Documents

source of light

refracted light rays

point source

normal ray image

incident light energy

medium ray

propagation of light

wavelength of light