TDB011 PAGE 1 VERSION 1.1 16/06/2016 TDB011 VAG GROUP IGNITION BYPASS AND PORT TESTER OPERATING MANUAL
TDB011! PAGE 1VERSION 1.1! 16/06/2016
TDB011 VAG GROUP IGNITION BYPASS AND PORT TESTER
OPERATING MANUAL
CONTENTSCONTENTS
INTRODUCTION PAGE 3
APPLICATIONS PAGE 4
GENERAL OPERATION PAGE 5
VEHICLE TESTING PAGE 6
BATTERY OPERATION PAGE 7
SPECIFICATION PAGE 8
CONTACT INFORMATION PAGE 9
DECLARATION OF CONFORMITY PAGE 10
DISPOSAL & RECYCLING INFORMATION PAGE 11
CONTENTS
TDB011! PAGE 2VERSION 1.1! 16/06/2016
TTDB011 VW AUDI SEAT SKODA FORCED IGNITION CABLE
The TDB011 VW, Audi, Seat and Skoda has the ability to force the ignition on without an ignition key, the TDB011 also tests the OBD socket wiring for power and faults and has a convenient LED to help with socket location when light is low or at night.
Plug the TDB011 into the OBD, check the lights on the device to ensure the wiring is all correct and the OBD port has power and ground connections.
Once the wiring has been checked, the TDB011 makes it possible to force the ignition on (Terminal 15) on VW, Audi, Seat and Skoda vehicles from the OBD diagnostic port.
This will allow you to wake up the control unit on the vehicle and establish communication without a key.
NOTE : Although the control units become live, dash lights will not necessarily illuminate, however an audible click of a relay
can be heard.
It is fitted with an OBD male port at one end and a female port at the other, and enables you to continue to use the diagnostics without having tounplug the unit.
INTRODUCTION
TDB011! PAGE 3VERSION 1.1! 16/06/2016
TAPPLICATIONS LIST
• VW Touran 1T • VW Golf 1K • VW GOLF 5M • VW EOS 1F • VW PASSAT 3B • VW TOUAREG 7L • VW PASSAT 3C • VW TIGUAN 5N • VW POLO 9N • VW JETTA 1K • VW CADDY 2K • VW LT35 2D • VW TRANSPORTER 7H • VW SCIRROCO 13 • VW BEETLE 1Y • VW SHARAN 7M • VW FOX 5Z • VW POLO 6R • AUDI A3 8P • Audi A4 8E • Audi A6 4F • Audi Q5 8R • AUDI Q7 4L • AUDI TT 8J • AUDI A8 8K • Bentley 3W • Porsche 9P • Skoda Fabis 6Y • Skoda Octavia 1Z • Skoda Roomster 5J • Seat Ibiza 6L • Seat Alhambra 7N • Seat Altea 5P • Seat Leon 1P
APPLICATIONS
TDB011! PAGE 4VERSION 1.1! 16/06/2016
GENERAL OPERATION
TDB011! PAGE 5VERSION 1.1! 16/06/2016
POWER AND GROUND CHECK LAMP
PIN 7 CHECK FOR FAULT LAMP
TOUCH SWITCH TO TURN ON LED TORCH
TOUCH SWITCH TO BYPASS IGNITION
LED TORCH WITH AUTO POWER OFF
VEHICLE TESTING
TDB011! PAGE 6VERSION 1.1! 16/06/2016
LOCATE OBD PORT USING THE TOUCH LED TORCH IF REQUIRED.
TOUCH THE IGNITION BYPASS SWITCH AND
THE RED LED WILL ILLUMINATE.
YOU CAN NOW COMMUNICATE WITH THE VEHICLE WITH YOUR DIAGNOSTIC
EQUIPMENT.
CHECK THE POWER IS CORRECT AND THAT
PIN 7 IS NOT ILLUMINATED.
IF PIN 7 LAMP IS ON, DO NOT CONNECT
DIAGNOSTIC EQUIPMENT.
BATTERY OPERATION
TDB011! PAGE 7VERSION 1.1! 16/06/2016
THE TDB011 IS FITTED WITH IN INTERNAL
CHARGEABLE BATTERY.
IT IS CHARGED BY CONNECTING IT TO A POWERED OBD PORT.
CHARGING TIME IS APPROX 6 HOURS TO REACH FULL CHARGE
BLUE LED WIILL GO OFF WHEN CHARGED
FULLY
BATTERY LASTS FOR 2 WEEKS WHEN NOT IN
USE
THE LED TORCH ALSO INCLUDES A 30
SECOND AUTO POWER OFF
CHARGING INDICATOR BLUE LED
OPERATING VOLTAGE 12 VOLTS
POWER CONSUMPTION 300 mW
BATTERY 50mAh/3.7V Lithium-Ion Polymer
OPERATING TEMPERATURE RANGE 0 to 50 degrees C
IP RATING IP61
SIZE 1 metre
WEIGHT 160 g
CHARGING VOLTAGE 4.2 VOLTS
CHARGING TIME 6 HOURS
AUTO POWER OFF 30 SECONDS
SPECIFICATION
TDB011! PAGE 8VERSION 1.1! 16/06/2016
CONTACT INFORMATION
The Diagnostic BoxChillingtonKingsbridgeDevonTQ7 2EZUnited Kingdom
Tel : +44 1548 580348Fax : +44 1548 580348
Email : [email protected]
Web : www.thediagnosticbox.com
Skype : diagnosticbox
TDB011! PAGE 9VERSION 1.1! 16/06/2016
TDB011! PAGE 10VERSION 1.1! 16/06/2016
DECLARATION OF CONFORMITY
Manufacturer’s Name: The Diagnostic Box
Manufacturer’s Address: Chillington
Kingsbridge
Devon
TQ7 2EZ
United Kingdom
Product Name: VAG Group Ignition Bypass Cable and OBD Port Tester
Product Model: TDB011
Conforms to: Specifications
EN 55022:1998, A1: 2000 + A2: 2003
EN 55024:1998, A1: 2001 + A2: 2003
Following the Provisions of EMC Directive: 204/108/EEC
Product conforms to class A emission standards
Signed : G CHAMBERS
Signed on behalf of The Diagnostic Box
DECLARATION of CONFORMITY
TDB011! PAGE 11VERSION 1.1! 16/06/2016
The symbol on the product or its packaging signifies that this product has to be disposed separately from ordinary household wastes at its end of life. Please kindly be aware that this is your responsibility to dispose electronic equipment at recycling centers so as to help conserve natural resources. Each country in the European Union should have its collection centers for electrical and electronic equipment recycling.
For information about your recycling drop off point, please contact your local electrical and electronic equipment waste management authority or the retailer where you bought the product.
•Do not dispose of the TDB011 with household waste.•Batteries are not to be disposed of in municipal waste stream and require separate collection.•Disposal of the packaging and your TDB011 should be done in accordance with local regulation
DISPOSAL & RECYCLING INFORMATION