(2,00 mm) .0787" TCSD SERIES TCSD TMM .26" (6,6 mm) TCSD–08–D–02.00–01–N–R WWW.SAMTEC.COM Due to technical progress, all designs, specifications and components are subject to change without notice. Mates with: TMM, TMMH, STMM, MMT, TW, MTMM, EHT, ETMM (-SR), ZSTMM TYPE STRIP NO. PINS PER ROW END OPTION –“XX.XX” = Assembled Length OTHER OPTION –F = Gold flash on contact Assembled Length in INCHES (± 1 / 8") 2 inches minimum Leave blank for standard plating: 30μ" (0,76 μm) Gold on contact area –04, –05, –06, –07, –08, –10, –12, –13, –15, –17, –20, –22, –25 (Standard sizes) 01 PLATING OPTION N LENGTH Note: TCSD Series assemblies are non- standard, non-returnable. –S = Single End –D = Double End (2,00) .0787 No. of positions x (2,00) .0787 + (4,00) .157 (5,08) .200 (2,00) .0787 (1,00) .039 (4,00) .158 01 (3,17) .125 (1,02) .040 –N = Notch Polarization For complete specifications see www.samtec.com?TCSD Insulator Material: Black Glass Filled Polyester Contact: BeCu Plating: Au or Sn over 50μ" (1,27 μm) Ni Wire: 28 AWG 7/36 Stranded, Tinned, Copper with Gray PVC Insulator Current Rating (TCSD/STMM): 2.8 A per pin (1 pin powered per row) Operating Temp Range: -40°C to +105°C Lead Size Accepted: (0,48 mm) .019" to (0,53 mm) .021" Contact Resistance: 15 mΩ Insertion Depth: (2,87 mm) .113" to (3,17 mm) .125" RoHS Compliant: Yes EJECTOR HEADERS & LOCKING CLIPS See TMM Series. See EHT Series. TCSD = Socket Strip –O = Outside Reverse 4 5 5 Requires –DXX 5 Requires –DXX 3 –P “XX” = Position Polarization –RW = Reverse Wiring 1 Not available with –O, –M, –R, –DXX or –BXX Blue or black wire opposite position #1. 2 –B “XX” = Breakout –M = Middle Reverse –R = Reversed –SR = Strain Relief –D “XX” = Daisy Chain No. of positions x (2,00) .0787 + (7,874) .3100 Specify “XX” as position number. Same position will be polarized on both ends. 01 02 “XX” 5"max. 2"min. Specify “XX” as number of conductors to be broken out. Breakout starts with Number 1 lead indicated by brown wire or red stripe. Shown on top side. 2" min. 4" minimum “XX” 1/8" Double Row Connectors Outer Most (End of assembly) 01 02 SPECIFICATIONS TIGER EYE ™ IDC SOCKET CABLE ™ • Ejector headers • Locking clips • Strain relief option F-215 For complete scope of recognitions see www.samtec.com/quality RECOGNITIONS POLARIZING KEY Specify PK-01-07 for polarizing key (Available in wheels of six each). Also polarizes SMM Series socket strips. ALSO AVAILABLE (MOQ Required) • Other sizes • Other platings Contact Samtec.