This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Legal notice:
The information presented is subject to change without notice.
ALE International assumes no responsibility for inaccuracies contained herein.
3 New features .......................................................................................................................................... 5
3.9.3 GET CALL from Deskphone to DECT handset .............................................................................. 11 3.10 SIP Trunking ................................................................................................................................. 11
3.10.1 In-band DTMF support on OmniPCX Office SIP TRUNK for outgoing call ..................................... 11
3.10.2 RFC 4904 ............................................................................................................................... 12 3.10.3 Update of the list of emergency numbers for FRANCE ............................................................... 12
3.11.1 Telekom Austria Features Rights default values ........................................................................ 12
3.11.2 Feature right options disabled by default for all targets ............................................................. 12 3.11.3 Free-dialing option in Automated Attendant .............................................................................. 13
3.11.4 Systems with default password ................................................................................................ 13
3.11.5 Customized user default password ........................................................................................... 13 3.11.6 Disable callback in consultation mode by default ....................................................................... 13
6 Known restrictions ................................................................................................................................. 14
Note 8082 My IC Phone supports display of Hebrew and Arabic characters.
This display is managed locally by 8082 My IC Phone.
Also, OTCV iPhone supports Hebrew and Arabic characters. User should configure the language manually from the application.
3.2.2 Israel target
Israel country target and Hebrew language are newly introduced since OmniPCX Office R10.1. Hebrew language is available by default in Israel target.
When Hebrew language is selected for a subscriber, voice prompts are played in Hebrew and if the terminal supports the display of Hebrew characters, text (labels, menus and call information) is displayed in Hebrew.
Note If the terminal does not support Hebrew characters, text is displayed in English
3.2.3 Arabic target support
Arabic language is already available in OmniPCX Office releases prior to R10.1, but only voice prompts are played in Arabic while text is displayed in French or English (according to the terminal language configured).
There are two variants of Arabic language, Arabic Male voice and Arabic Female voice.
From OmniPCX Office R10.1, when Arabic language is selected for a subscriber, voice prompts are played in Arabic and text is displayed in Arabic on terminals supporting Arabic characters.
Note If the terminal does not support Arabic characters, text is displayed in French or English (according to the
terminal language configured).
3.3 8242 IP-Dect
See Technical Communication “Dect 8242” Reference 1942.
Warning IP-Dect 8242 SW will become available from BP Portal in the next coming weeks.
Support of 8242 DECT in CAT-iq/GAP mode on IP-DECT: for the SW version, please refer to Dect 8242
Technical Communication.
Alcatel-Lucent OmniPCX Office - Release 10.1
Release Note for OmniPCX Office RCE Release 10.1 Version 014.001 TC2040 ed.01
From OmniPCX Office Release 10.1, “Split RPN” is supported. Only two synchronization clusters one in main and another in remote site is allowed.
DAPs in main site must be in one synchronization cluster, not split up into more synchronization clusters. DAPs in remote site must be in one synchronization cluster, not split up into more synchronization clusters.
If split RPN is not enabled then there must be only one location.
A new Checkbox is introduced in the OMC DAP Configurator for Split RPN :
IP Dect / DAP Configurator / Misc Setting / Split RPN (at the bottom of the page). By default the value is unchecked.
3.5.4 Serviceability
3.5.4.1 Multicast connectivity diagnostic
OmniPCX Office R10.1 provides in Webdiag interface, a Multicast diagnostic tool. Results can be retrieved in a text file or directly displayed in the Webdiag.
One click to retrieve the Multicast information from the DAPs (can be done remotely) :
Retrieve data file from DAP Include data file in the archive
Display the content of the data file
3.5.4.2 Status of IP DECT DAP DECT synchronization
OmniPCX Office R10.1 provides in Webdiag interface, a Synchronization diagnostic tool.
Results can be retrieved in a text file or directly displayed in the Webdiag.
One click to retrieve the synchronization information from the DAPs (can be done remotely) : Retrieve data file from DAP
Include data file in the archive
Display the content of the data file
3.6 AP-8340-C
From R10.1, the new DAP 8340-C IP-DECT is supported in addition of the previous DAP models. Optimized IP-DECT AP 8340-C without G729 Daughter board / without support for G729 codec.
Note AP-8340-C can be installed in “mix” topology with AP 4080 and AP 8340 (sites where G729 is not used with
present installed APs).
Warning “G729” protocol in use or not in use is a global system configuration. When AP-8340-C is installed on OmniPCX Office system : OMC / IP-Dect / DAP Configurator / Misc Settings
: G729 mode : “G729 not supported” must be selected.
If G729 protocol is enabled, AP-8340-C will not start.
Alcatel-Lucent OmniPCX Office - Release 10.1
Release Note for OmniPCX Office RCE Release 10.1 Version 014.001 TC2040 ed.01
This new feature right “Mailbox of initial Called party” can be configured with OMC in menu:
Subscribers/Base Stations List -> Select Subscriber -> Details -> Features -> Part3.
• When the feature right “Mailbox of initial called party” is enabled in the Initial called party, the destination mailbox is the initial called party’s mailbox (same as OXO R10.0 and before).
• When the Feature right “Mailbox of initial called party” is disabled in initial called party, the destination mailbox is the forwarded destination’s mailbox.
• Dynamic routed call cannot be re-routed to VMU. In R10.1, there is no change in this behavior.
Selection of voice mailbox feature is not applicable when dynamically routed calls re-routed to VMU.
Note Feature right “Mailbox of initial called party” is : - enabled for all terminals by default in OmniPCX Office Release 10.1 new installation and after cold
reset,
- is retained after warm reset of the system, - is enabled after migration from OXO release <= R10.0 to R10.1,
- retained after migration from OXO release R10.1 to >=R10.1.
3.9.2 Dynamic routing cascading
3.9.2.1 Presentation
From 10.1, if a subscriber/group receives a dynamically routed call and if the call is not answered by the receiver, then the new cascading mechanism enhances the call distribution.
Note - Dynamic Routing cascading is supported for subscribers and Hunting groups.
- Dynamic Routing configured on the resource key of cascaded destination is not taken into account
by the initial called party, while implementing Dynamic Routing cascading.
- Attendant overflow behavior is not changed in R10.1.
3.9.2.2 Feature activation
This new feature right “Maximum Number of Dynamic Routing Cascading Levels ” can be configured with OMC
in menu :
Subscribers/Base Stations List or Hunting Groups -> Select Subscriber -> Details -> Dynamic Routing, modify
« Maximum Number of Dynamic Routing Cascading Levels ».
The default value is 1 and corresponds to the same behavior as in R10.0 and before : Dynamic
Routing Cascading disabled.
Maximum value allowed (maximum number of Dynamic Routing cascading levels) : 5
The maximum number of Dynamic Routing cascading levels is configurable in OMC for each Subscriber and Hunting group.
Alcatel-Lucent OmniPCX Office - Release 10.1
Release Note for OmniPCX Office RCE Release 10.1 Version 014.001 TC2040 ed.01
If one level is not defined in the cascaded destinations, cascading ends before reaching limit defined for the
initial subscriber who receives the call. So there is an overflow to the General Level (if defined).
If one level is an external destination, cascading ends after routing the call to external destination. All the calls
are released (initial call & cascaded destinations).
If one level number is the same than level 1 of the initial called party, then the cascading ends before reaching
limit defined for the initial subscriber who receives the call. So there is an overflow to the General Level (if
defined).
If one set is out of service in the cascaded destination, the cascading continues.
Note Configuration of “Maximum Number of Dynamic Routing Cascading Levels” is : - reset to default value after cold reset. - retained after warm reset.
- set to default value after migration from OXO release <= R10.0 to R10.1. - retained after migration from OXO release R10.1 to >=R10.1.
3.9.3 GET CALL from Deskphone to DECT handset
From OmniPCX Office Release 10.1, support of Get call feature “Fixed Desktop phone to Mobile DECT” via a
soft key or Feature Code from the DECT handset 400/8232/8242 in IBS mode and with Feature Code with IP-DECT mode.
DECT sets other than 400/8232/8242 with Feature Code in IBS/IP-DECT mode.
Get Call feature facilitates the user to switch a call from one terminal to another terminal with a simple action,
when both terminals are part of multiset.
Note Call switching from Desktop Phone to OTCV or WLAN Handsets is not supported.
3.10 SIP Trunking
3.10.1 In-band DTMF support on OmniPCX Office SIP TRUNK for outgoing call
Support of In band DTMF on SIP trunk per SIP gateway.
This parameter allows to select the method used to send and receive DTMF.
Till R10.0, “SIPdtmflnB” noteworthy address is used to enable the InBand DTMF digits detection on SIP
trunk.
This noteworthy does not support InBand DTMF transmission from OXO SIP trunk gateway. From R10.1, new “DTMF” list box is introduced in :
OMC -> Numbering -> ARS -> Gateway Parameters -> Line selection -> Details -> “Media” Tab -> DTMF. DTMF list box has two options : “Out-Of-Band (RFC4733)” mode and “In-Band” mode.
Default value is “Out-Of-Band (RFC4733)” for all targets
Alcatel-Lucent OmniPCX Office - Release 10.1
Release Note for OmniPCX Office RCE Release 10.1 Version 014.001 TC2040 ed.01
Standardized mechanism to convey trunk group parameters in SIP and Tel Uniform Resource Identifiers
(URIs).
From R10.1 two new SIP/Tel URI parameters “Trunk Group ID” and “Trunk Context” are introduced in :
OMC -> Numbering -> ARS -> Gateway Parameters -> Line selection -> Details -> Protocol” to convey trunk group information in SIP messages as per RFC4904.
“Trunk Group ID” parameter specifies trunk group label or identifier.
"Trunk Context" parameter establishes a scope of Trunk group specified in the "Trunk Group ID" parameter.
3.10.3 Update of the list of emergency numbers for FRANCE
For the system targets France and OBS, the following numbers have been added to the list of emergency
numbers:
115 (SAMU Social - SOS Sans Abri)
119 (enfance maltraitée)
116 000 (enfants disparus)
196 (secours maritime)
911
3.11 Security
3.11.1 Telekom Austria Features Rights default values
Following feature right options are disabled by default in Austria and Telecom Austria target. • Paging
• Selective diversion • Intrusion allowed
• UUS allowed • Inhibit flag
• DND override allowed
• Remote Substitution • Inhibition time ranges
3.11.2 Feature right options disabled by default for all targets
Following feature right options are disabled by default for all targets.
• Remote Substitution • Inhibit flag
• Inhibition time ranges
Note Remote Substitution is not available by default in Public Numbering Plan in OMC (Numbering -> Numbering Plans -> Public Numbering Plans) for all targets.
Alcatel-Lucent OmniPCX Office - Release 10.1
Release Note for OmniPCX Office RCE Release 10.1 Version 014.001 TC2040 ed.01
Free-dialing option is not available by default in Automated Attendant Menu configuration (OMC -> Voice Processing -> Automated Attendant -> AA Menu) for all country targets.
3.11.4 Systems with default password
From R10.1, at first connection the installer is forced to change default passwords of all accounts that can be used to access management services of the system.
3.11.5 Customized user default password
From R10.1, Subscribers EDN default password is randomly generated after fresh installation or after upgrade to Release 10.1.
This default password is specific to each system and only known by the users of the system. Installer also can define the EDN user password from OMC.
3.11.6 Disable callback in consultation mode by default
Callback option is enabled / disabled by a new feature right “Callback in VM Consultation” for each user. By default, this feature right is disabled for all country targets.
4 OmniPCX Office R10.1 Licence
No new licence (same licence level than for OmniPCX Office R10.0) but following existing licences must be
available in the OmniPCX Office system for :
PIMphony Touch : PIMphony “PRO” licence (same “PRO” licence as for PIMphony v6.8 legacy
application).
OTCV Windows : “My IC Mobile” licence
At Offer level / catalog : introduction of “OTCV for windows mobile” license.
5 MIGRATION
See “OmniPCX Office Migration” technical communication reference “1808” for more details.
For migrations from R10.0 SW to R10.1 SW you may use :
OMC_10.1_8.1a (and above) : automatic upgrade with database save and restore can be performed
with OMC_10.1a_8.1a (and above).
LOLA version 15.1 with database restore,
For migrations < R10.0 (i.e. R920, R820) to R10.1 software you may use.
LOLA version 15.1 with database restore.
Alcatel-Lucent OmniPCX Office - Release 10.1
Release Note for OmniPCX Office RCE Release 10.1 Version 014.001 TC2040 ed.01