Top Banner
TC-KR Bluetooth Hose-End Timer and Misting Controller INSTRUCTIONS FOR USE K-Rain Manufacturing Corp. 1640 Australian Avenue | Riviera Beach, FL 33404 USA 561.844.1002 | FAX: 561.842.9493 | 1.800.735.7246 www.krain.com 99901350
12

TC-KR - Drip irrigation · TC-KR Bluetooth Hose-End Timer and Misting Controller INSTRUCTIONS FOR USE ... to reset the password, you must remove the battery for 10 seconds, then re-power

Sep 19, 2018

Download

Documents

lydat
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: TC-KR - Drip irrigation · TC-KR Bluetooth Hose-End Timer and Misting Controller INSTRUCTIONS FOR USE ... to reset the password, you must remove the battery for 10 seconds, then re-power

TC-KRBluetooth Hose-End Timerand Misting Controller

INSTRUCTIONS FOR USE

K-Rain Manufacturing Corp.1640 Australian Avenue | Riviera Beach, FL 33404 USA561.844.1002 | FAX: 561.842.9493 | 1.800.735.7246www.krain.com

99901350

Page 2: TC-KR - Drip irrigation · TC-KR Bluetooth Hose-End Timer and Misting Controller INSTRUCTIONS FOR USE ... to reset the password, you must remove the battery for 10 seconds, then re-power

01

1. Install the free K-RainBL App:

From the App Store or Google Play

2. The unit requires a 9V battery prior to operating. Install one 9V battery by removing the blue plastic shield and rubber gasket.

3. To associate the module with your Smartphone or tablet, launch the application and choose the TC-KR Photo:

Page 3: TC-KR - Drip irrigation · TC-KR Bluetooth Hose-End Timer and Misting Controller INSTRUCTIONS FOR USE ... to reset the password, you must remove the battery for 10 seconds, then re-power

02

1. Install the free K-RainBL App:

From the App Store or Google Play

2. The unit requires a 9V battery prior to operating. Install one 9V battery by removing the blue plastic shield and rubber gasket.

3. To associate the module with your Smartphone or tablet, launch the application and choose the TC-KR Photo:

4. You will see the TC-KR module, followed by the serial number and the signal strength:

5. To associate, tap on the controller name, then tap “ASSOCIATE” and the ap will initialize connection:

Page 4: TC-KR - Drip irrigation · TC-KR Bluetooth Hose-End Timer and Misting Controller INSTRUCTIONS FOR USE ... to reset the password, you must remove the battery for 10 seconds, then re-power

03

6. When the TC-KR is associated, it will show up in your list of modules. To add another controller, tap the + sign on the bottom left hand corner:

Page 5: TC-KR - Drip irrigation · TC-KR Bluetooth Hose-End Timer and Misting Controller INSTRUCTIONS FOR USE ... to reset the password, you must remove the battery for 10 seconds, then re-power

04

6. When the TC-KR is associated, it will show up in your list of modules. To add another controller, tap the + sign on the bottom left hand corner:

7. To bring up the main programming screen, tap the controller name:

From this screen you can:

1. Choose the mode, either misting or irrigating

2. Program the duration, days or intervals

3. Run the system manually

4. View battery status and signal strength

5. Change your controller’s name

6. Add a security key

2

3

4

5

6

1

Page 6: TC-KR - Drip irrigation · TC-KR Bluetooth Hose-End Timer and Misting Controller INSTRUCTIONS FOR USE ... to reset the password, you must remove the battery for 10 seconds, then re-power

05 05

Note: When you change from misting to watering mode, your programming will be lost.

Note: to reset the password, you must remove the battery for 10 seconds, then re-power and follow steps 2-6.

Page 7: TC-KR - Drip irrigation · TC-KR Bluetooth Hose-End Timer and Misting Controller INSTRUCTIONS FOR USE ... to reset the password, you must remove the battery for 10 seconds, then re-power

05

Nota: Cuando se cambia de nebulización al modo de riego, la programación se perderá.

Nota: Para restablecer la contraseña, debe quitar la bateria durante 10 segundos, luego volver a reconectar la bateria y siga los pasos 2-6.

Page 8: TC-KR - Drip irrigation · TC-KR Bluetooth Hose-End Timer and Misting Controller INSTRUCTIONS FOR USE ... to reset the password, you must remove the battery for 10 seconds, then re-power

03

6. Cuando el TC-KR está asociado, se mostrará en la lista de sus módulos. Para añadir otro controlador, presione el signo + en la esquina inferior izquierda:

Page 9: TC-KR - Drip irrigation · TC-KR Bluetooth Hose-End Timer and Misting Controller INSTRUCTIONS FOR USE ... to reset the password, you must remove the battery for 10 seconds, then re-power

04

6. Cuando el TC-KR está asociado, se mostrará en la lista de sus módulos. Para añadir otro controlador, presione el signo + en la esquina inferior izquierda:

7. Para mostrar la pantalla de programación principal, toque el nombre del controlador:

Desde esta pantalla se puede:

1. Elegir el modo, ya sea el nebulización o irrigación

2. Programar la duración, diario o interdiario

3. Ejecutar el sistema manualmente

4. Ver el estado de la batería y la potencia de la señal

5. Cambiar el nombre de su controlador

6. Agregar una clave de seguridad

2

3

4

5

6

1

Page 10: TC-KR - Drip irrigation · TC-KR Bluetooth Hose-End Timer and Misting Controller INSTRUCTIONS FOR USE ... to reset the password, you must remove the battery for 10 seconds, then re-power

01

1. Instalar la K-Rain BL App:

Desde el App Store o Google Play

2. La unidad requiere una batería de 9V antes de operar. Instalar la batería de 9V removiendo la guarda protectora plástica azul y la junta de goma.

3. Para asociar el módulo con su teléfono inteligente o tableta, inicie la aplicación y seleccione la foto del producto TC-KR:

Page 11: TC-KR - Drip irrigation · TC-KR Bluetooth Hose-End Timer and Misting Controller INSTRUCTIONS FOR USE ... to reset the password, you must remove the battery for 10 seconds, then re-power

02

1. Instalar la K-Rain BL App:

Desde el App Store o Google Play

2. La unidad requiere una batería de 9V antes de operar. Instalar la batería de 9V removiendo la guarda protectora plástica azul y la junta de goma.

3. Para asociar el módulo con su teléfono inteligente o tableta, inicie la aplicación y seleccione la foto del producto TC-KR:

4. Podrá ver el módulo TC-KR, seguido de su número serial y la intensidad de la señal:

5. Para asociar, toque en el nombre del controlador, luego toque “ASOCIAR” y la aplicación inicializará la conexión:

Page 12: TC-KR - Drip irrigation · TC-KR Bluetooth Hose-End Timer and Misting Controller INSTRUCTIONS FOR USE ... to reset the password, you must remove the battery for 10 seconds, then re-power

TC-KRControlador Nebulizador y Temporizador TC-KR Bluetooth Para Manguera.

INSTRUCCIONES

K-Rain Manufacturing Corp.1640 Australian Avenue | Riviera Beach, FL 33404 USA561.844.1002 | FAX: 561.842.9493 | 1.800.735.7246www.krain.com

99901350