C:My documents\salesofficeandrew\270173 Toyota Prado. Revision 1 – 6/04/2010 This is an Uncontrolled document. 270173 L.P. GAS CYLINDER INSTALLATION INSTRUCTIONS TOYOTA LANDCRUISER PRADO 2003 & 2010 Models This Automotive LP Gas cylinder must be installed in the vehicle in strict accordance with the latest requirements of AS/NZS1425. Any modifications to the cylinder will render the warranty null and void. General Cylinder Specifications: DIAMETER : 375mm LENGTH : 847mm WATER CAPACITY: 84L L.P GAS CAPACITY : 67L VALVE ORIENTATION : 90 degrees Installation: 1. This cylinder is designed to be mounted 2. Remove the rear secondary fuel tank underneath the vehicle behind the rear from the vehicle. differential. 3. Loosely fix the right hand attachment bracket 4. Jack the cylinder up into position ensuring the as shown above to the right hand cylinder bracket. right bracket is positioned on the inner side Loosely fix the left hand bracket. of the chassis and the left is on the outer side of the chassis. Move the cylinder as close to the differential as possible ensuring clearance.