Tata Sumo Grande New DICOR / TURBO (Revision)

7/23/2019 Tata Sumo Grande New DICOR / TURBO (Revision)

1/142


2/142


3/142

TATATATATATTTTTAAAAA GRANDEGRANDEGRANDEGRANDEGRANDE

(DICOR / TURBO)

Owner's Manual & Service Book

Passenger Car Business Unit (PCBU)

Mumbai Pune

This owners manual should be considered as a permanent part of the vehicle and must remain with the vehicle


4/142

2

Q This Owners Manual is advised to be kept in the vehicle at all times.

Q This book will help you to understand the vehicle better, maximise uptime of the vehicle & obtainbetter performance at optimum cost.

Q The recommended routine maintenance servicing along with any running repairs that may be required, shouldbe entrusted to TATA Authorised Workshop to ensure that only latest methods and genuine TATA MOTORSreplacement parts are used for the continued reliability, safety and performance of the vehicle.

Q Some of the items / accessories / features shown / given in this book may not be fitted on your vehicle, butthey are applicable for other versions of TATA GRANDE.

Q (C) Copyright 2004 TATA MOTORS

Q All rights reserved. The material in this manual may not be reproduced or copied, in whole or in part, in anyform without written permission from TATA MOTORS.

Q The information and specifications given in this book are valid as on the date of printing. TATA MOTORSLimited reserves the right to make changes in design and specifications and/or to make additions to orimprovements in this product without obligation to install them on products previously sold.

Q In the event of the Vehicle being sold, please ensure that this manual is left in the vehicle for the reference ofthe new owner.

A Note


5/142

Dear Customer,

Thank you for selecting TATA GRANDE the vehicle of your choiceWe welcome you to the world of advanced automotive engineering in a form especially suited toyour operating conditions.

This book gives you all the information necessary for making your ownership of this vehicle athoroughly satisfying experience.

To assist you in maintaining your vehicle as per recommended schedule, we have a widespreadnetwork of dealers and service centres. The list is included in this book for your convenience.

Should you need any special assistance, please call on our Regional / Area offices which arealso listed in this book.

Please note that by adhering to the correct operating procedures and by availing the scheduledmaintenance services at our authorised service centres, you can obtain the maximum performancefrom your vehicle.

We request you to go through the book and derive many miles of motoring pleasure.

WE WISH YOU GOOD LUCK AND PROSPERITY

Forewo


6/142

4

Customer Assistance

Safety and vehicle damage warnings

In this manual, you will see CAUTION and NOTICE warnings.

CAUTION

This is a warning. May cause injury to people if the warning

is ignored. You are informed what you must or must not do

in order to avoid or reduce the risk to yourself and other

people.

NOTICE

This is a warning. May cause damage to the vehicle or its

equipment if the warning is ignored. You are informed what

you must or must not do in order to avoid or reduce the riskof damage to your vehicle and its equipment.

WARNING

Indicates a strong possibility of severe personal injury or

death if the instructions are not followed.

Safety symbolIn this manual, you will also see a circle with

a slash. This means "Do not", "Do not do

this", or "Do not let this happen".

IMPORTANT INFORMATION ABOUT THIS MANUAL


7/142

Content

Fuel Flap Tank Opening 44

Gear Shift Lever & Parking Brake 45

Anti Theft / Immobiliser system 46

Getting Started

Key & Door Lock 54

Child Lock 55

Tail Gate Locking / Opening 55

Seats, Seat Adjustments & Seat Belts 56

Driving

Checks Before Driving 64

Safety Checks 64

Fuel Saving Tips 66

Starting & Stopping the Engine 67

Gear Shifting 67

Braking 69

Driving In Adverse Conditions 70

Incase Of Emergency

Jack Locatation / Warning Triangle 72

Flat Tyres replacement 73

Know your TATA GRANDE 6

Warranty - Terms & Condition 8

Environmental Care 10

Tata Grande At A Glance

Driving Controls 13

Instrument Cluster 14

Operating Switches 22

Steering Lock cum Ignition Switch 24

Combi Switch 25

Analog Clock & Music System 28Heating, Vent illation & Air Condit ioning 29

Lamps 35

Sun visor, Goggle case & Grab Handle 38

Rear View Mirrors 39

Glove Box, Cup holder & Uti li ty Pockets 40

Cigarette lighter 41

Power Windows & Manual Window Winding 42Rear Side Glasses 43

Steering Wheel Position Adjustment 43


8/142

6

Contents

Spare Wheel 73

Limp Home Mode 75

Starting The Engine with Jump Leads 76

Towing the Vehicle 77

Routine Service 78

Preliminary Trouble shooting 79

Electrical Maintenance

Fuses & Relays 86

Bulb Specification 90

Bulb Replacement 91

Vehicle Care

Washing & Cleaning 94

General Precautions 96

Maintenance

Opening & Closing The Bonnet 99

Engine Compartment 100

Air Filter & Engine Oil 102

Engine Coolant 103

Brake Fluid & Power Steering Reservoir 104

Clutch Fluid & Sedimenter 106

Fuel Filter & Priming Pump 107

Windshield washer & Tyre 109

Tyre Inspection 110

Tyre Rotation 111

Wheel Al ignment, Balancing & Catalytic 112converter maintenance

Battery 113

Important Technical Information

Belt Tension 114

Fuel, Lubricants & Coolants 115

Oil Filling & Drain Points 118

Technical Specification 119

Information At a Glance (Dimensions) 122

Vehicle Identification

Loctation of Aggregate Number 123

PDI Service 125

Service Schedule 127

Record of Repairs Carried Out 134


9/142

Know Your Tata Gran

YourTATA GRANDEis a new generation multi utility

vehicles and is a result of extensive research and

development byTATA MOTORS LIMITED. This vehicle

also incorporates all the well known and proven features

of TATA MOTORSprecision and advanced technology.

Easy maneuverability and economic life cycle cost

makesTATA GRANDE ideal for operating in both urban

as well as rural areas.

This vehicle is powered by 4DL TCIC BS-III Engin

and a new generation 2.2L DICOR BS-III engine whic

is in turn mated to a 5 speed fully synchromesh gearbo

with overdrive for excellent fuel efficiency and tubeletyres for better road holding and grip.

YourTATA GRANDEs 2.2L DICOR engine is a refine

power plant employing a sophisticated common rail fu

system. The engines ECU (Electronic Control Uni

basically a 32 bit microprocessor, controls the engine

fuel injection, operation of the Variable Geomet

Turbocharger (VGT) and other related parameters for

to perform optimally.


10/142

8

Know Your Tata Grande

Your TATA GRANDE has Vacuum assisted

independent hydraulic brakes on the front and rear

wheels through tandem master cylinder and tandem

booster, ventilated front disc brakes with twin potcalipers on front wheels for better braking and safety.

The front independent suspension setup has telescopic

shock absorbers and an anti roll bar. The rear

suspension is via parabolic springs. This suspension

setup ensures good road holding and stability.The 483DL TC IC is a SOHC, turbocharged engine with

intercooler, and indirect fuel injection system.An ergonomically designed cab with added features like

collapsible power steering, central locking, powerwindows, highly effective HVAC for comfort, musicsystem, state of art headlamp and rear lamps, goodall-found visibility and easy access to areas of dailymaintenance is some of the other user-friendly featuresof theTATA GRANDE.

TATA vehicles are backed by well established servicenetwork with trained and skilled manpower ensuringproper maintenance. Timely maintenance and

servicing as recommended in this manual ensuretrouble free operation over long year.


11/142

We WARRANT each TATAGRANDE vehicles & parts thereofmanufactured by us to be free fromdefect in material andworkmanship, subject to thefollowing terms & conditions :

1. This warranty shall be for 24months OR 75000 kms,whichever is earlier from the dateof sale of the vehicle, However,for the vehicles used forcommercial applications(including those used for hire orreward viz those operating witha yellow number plate), the

warranty shall be limited to 24months or 50,000 kms,whichever occurs earlier.

2. Our ob liga tion unde r thiswarranty shall be limited torepairing or replacing, free ofcharge, such parts of the vehiclewhich, in our opinion, aredefective, on the vehicle beingbrought to us or to our dealers

within the warranty period. Theparts so repaired or replacedshall also be warranted forquality and workmanship butsuch warranty shall be co-

terminus with this originalwarranty.

3. Any part which is found to bedefective and is replaced by us

under the warranty shall be ourproperty.

4. As fo r such par ts as ty res,batteries, transfer case, rubberparts, electrical equipment andfuel injection equipment, powersteering equipment, A.C.equipment not manufactured byus but supplied by other parties,this warranty shall not apply, but

buyers of the vehicle shall beentitled to, so far as permissible

by law, all such rights as we mayhave against such parties undertheir warranties in respect ofsuch parts. Our Dealers/TASCswill assist the purchaser in takingup the complaint with therespective manufacturers andtheir decision on the warranty willbe final.

5. This warranty shall not apply if thevehicle or any part thereof isrepaired or altered otherwisethan in accordance with our

standard repair procedure, by any person other than osales or servicestablishments, our authorisedealers or service centres service points in any way so ain our judgement which shbe final and binding, to effeits reliability, nor shall it apply in our opinion which shall bfinal and binding the vehicle subjected to misusnegligence, improper inadequate maintenance accident or loading in excess such carrying capacity acertified by us, or such servicas prescribed in our OwneManual and Service Book anot carried out by the buythrough our sales or servicestablishments, our authorisedealers or service centres service points.

6. This warranty shall not covnormal wear and tear or a

inherent normal deterioration the vehicle or any of its pararising from the actual use the vehicle or any damage du

Know Your Tata Gran

WARRANTY - TERMS & CONDITION


12/142

10

to negligent or improperoperation or storage of thevehicle. This warranty shall notapply to normal maintenanceservices viz. oils & fluid changes,head lamps focussing, fastenerretightening, wheel balancing,tyre rotation, adjustment of valveclearance, fuel timing, ignitiontiming and consumables likebulbs, fuel filters and oil filtersetc. This warranty shall not applyto any damage ordeter io ra t ion caused byenvironmental pollution orbird droppings. This warrantyshall not apply to V-belts,hoses and gas leaks in caseof air conditioned vehicle.Sl ight i r regular i t ies notrecognised as affecting thefunction or quality of the vehicleor parts such as slight noise orvibration and defects appearingonly under part icular orirregular operations or itemsconsidered characteristic ofthe vehicle.

7. This warranty shall be null andvoid if the vehicle is subjected

to abnormal use such asral ly ing, racing orpart ic ipat ion in any othercompeti t ive sports. Thiswarranty shall not apply to anyrepairs or replacement as aresult of accident or collision.

8. This warranty is expressly inlieu of all warranties, whetherby law or otherwise, expressedor impl ied, and al l otherobligations or liabilities on ourpart and we neither assume norauthor ise any person toassume on our behalf, any

other liability arising from thesale of the vehicle or anyagreement in relation thereto.

9. The buyer shall have no otherrights except those set outabove and have, particular, noright to repudiate the sale, orany agreement or to claim anyreduct ion in the purchaseprice of the vehicle, or to

demand any damages orcompensat ion for losses,inc idental or indirect, orinconvenience orconsequential damages, loss

of vehicle, or loss of t ime,otherwise, incurred oraccrued.

10. Any c la im ar is ing from th is

warranty shall be recognisedonly if it is notified in writing tous or to our concerned dealerwithout any delay soon aftersuch defect as covered andascerta ined under th iswarranty.

11. Th is warranty sha l l standterminated if the vehicle istransferred or otherwise

alienated by the buyer withoutour prior written consent.

12. We reserve our rights to makeany change or modification inthe design of the vehicle or itsparts or to introduce anyimprovement therein or toincorporate in the vehicle anyadditional part or accessory atany time without incurring anyobligation to incorporate the

same in the vehicles previouslysold.


WARRANTY - TERMS & CONDITIONS


13/142

Know Your Tata Gran

ENVIRONMENTAL CAR

TATA MOTORS LTD. iscommitted to produce the vehiclesusing environmentally sustainabletechnology. A number of featureshave been incorporated in TataMotors passenger vehicles whichhave been designed to ensureenvironmental compatibilitythroughout the life cycle of thevehicle. We would like to informyou that your vehicle meetsemission norms and this is being

regularly validated at themanufacturing stages.

As a user you too can protectthe environment by operatingyour vehicle in a proactivemanner. A lot depends on yourdriving style and the way youmaintain your car. We have

given few tips below for yourguidance.

DRIVING

Avoid frequent and violentaccelerations.

Do not carry anyunnecessary weight on thevehicle as it overloads theengine. Avoid using devicesrequir ing high powerconsumption during slow citytraffic condition.

Monitor the vehicles fuelconsumption regularly and if

showing rising trend get thevehicle immediately attendedat the Companys AuthorisedService Outlets.

Switch off the engine duringlong stops at traffic jams orsignals. If you need to keepthe engine running, avoid

unnecessary revving it up orstopping and starting.

It is not necessary to rev up

the engine before turningoff as it unnecessarily burthe fuel.

Shift to higher gears as sooas it is possible. Use eacgear upto 2/3 rd of i tmaximum engine speed. chart indicating gear shiftinspeeds is given in this boo

MAINTENANCE

Ensure that recommende

maintenance is carried oon the vehicle regularly at thAuthorised Service Outlets

As soon as you see anleakages of oil or fuel in thvehicle we recommend to git attended immediately.

Use only recommende

grades and quanti ty lubr icants and cleauncontaminated and correfuels.


14/142

12


ENVIRONMENTAL CARE

Get your vehicle checked foremission periodically byauthorised dealer

Ensure that fuel filter, oil filterand breather are checkedperiodically and replaced, ifrequired, as recommendedby Tata Motors.

Do not pour the used oils orcoolants into the sewagedrains, garden soil or openstreams. Dispose the used

fi l ters and batter ies incompliance with the currentlegislation.

Do not allow unauthorisedperson to tamper withengine settings or to carrymodifications on the vehicle.

Never allow the vehicle to runout of fuel.

Parts l ike brake l iners,clutch disc should bevacuum cleaned. Do not use

the compressed air forcleaning these parts whichmay spread the dust in theatmosphere.

While carrying out theservicing or repairs ofyour vehicle you shouldpay keen attention tosome of the importantengine aggregates andwiring harness whichgreatly affect emission.These components are :-

1. Fuel injection equipments- pump, rail, Injectors,Nozzles and high pressurepipes.

2. A ir In ta ke & E xh au stsystem especially forleakages.

3. Cylinder head for valve

leakage.4. All filters such as air, oil &

fuel f ilters (checkperiodically).

5. Turbocharger & VacuumModulator OR its vacuumhoses.

6. EGR System &

components.7. Electrical connections8. Se rvi ce l am p

contineously glows, pleasetake the vehicle to ServiceStation.

9. Catalytic Convertor10. EMS wiring harness i.e.

electrical connections to

all sensors and actuators.

This owners manual containsfurther information on drivingprecautions and maintenancecare leading to environmentprotection. Please familiariseyourself with these aspectsbefore driving.


15/142

Tata Grande At a Gla

DRIVING CONTRO

1. Steering Wheel

2. Instrument Cluster

3. Side Air Vents

4. Horn Pads

5. Accelerator Pedal

6. Brake Pedal

7. Clutch pedal

8. Cup Holder

9. Parking Brake

10. Gear Shifting Lever

11. Coin Box

12. Music System

12. A.C.Controls

13. Analog Clock

14. Central A.C. Air Vents

15. Glove Box


16/142

14

Tata Grande At a Glance

INSTRUMENT CLUSTER (GX)

10913 12 11

14

16

231524 19 201718

2221

1

2

3

4

6

7

8

9

All indicators may not be provided on some instrument cluster and may not be applicableto all models.ca

5


17/142

INSTRUMENT CLUSTER ( EX

Tata Grande At a Glan

910913 12 11

14

16

2315 1718

21

1

2

6

7

8

All indicators may not be provided on some instrument cluster and may not be applicableto all models.ca

24

3

4

5


18/142

16


INSTRUMENT CLUSTER

1. SERVICE Indicator (Red)

2. Door Open Indicator (Red)

3. Lock Indicator Warning Light

4. Hazard Warning Indicator

5. Position Lamp Indicator

6. MIL Indicator (Amber) If fitted

7. High Water level Indicator in Sedimenter (Amber)

8. Glow Plug ON Indicator (Amber) - If fitted

9. Direction Indicator (Green)

10. Head Lamp Main Bean Indicator (Blue)

11. Low Engine Oil Pressure Indicator (Red)

12. Battery Charging Indicator (Red)

13. Brake Fluid Level Check/Parking Brake Indicator(Red)

14. Seat Belt Indicator (Red)

15. Trip Odometer

16. Cumulative Odometer

17. Mode Selector Knob (Odometer)

18. Set Knob (Odometer)

19. High Temperature Warning

20. Low Fuel warning

21. Speedo Meter

22. RPM Meter

23. Fuel Gauge

24. Temperature Gauge


19/142


INSTRUMENT CLUSTE

one of the doors is partially open,the door open indicator will comeon. In addition to this, in case driverside door is not properly closed

an audio beep will come for fewseconds, when the key is inserted.

Hazard Warning:

This can be operated withoutignition ON. Press the hazardwarning switch (red knob) on thecentre of the dash board, all turnindicator l ights will flash

simultaneously to warn the otherroad users about any hazardouscondition of the car. Press theknob again to switch OFF thehazard function.

NOTE

If lights do not blink or blinkrapidly, it is an indication ofproblem in the blinker electrical

system or the indicator bulb atfront or rear has fused. Get itrectified immediately.

Position LampIndicator :

Symbol lights up when the positiolamps are switched ON(instrument cluster illuminatiolamps when the position lamps aON). Position lamps can be useas parking lamps.

Malfunction IndicatorLamp - MIL (if installed)

This indicator comes ON when thignition is turned on and goes OF

once the engine is cranked. Thindicator remains on for any enginsensor related fault due to whicemissions of the vehicle may crosthe regulatory limit.

CAUTION

MIL illuminates / flashes when malfunction occurs in the engineemission system. Do not drivethe vehicle if this indicatoremains ON or Flashes. Get theproblem attended to immediatel

SERVICE Indicator :

This lamp indicates your vehiclesengine condition when a

malfunctioning occurs in theengine, wiring harness, EMS, etc.this lamp indicates as below:

1. Comes ON when key is inIGN position and goes OFFwhen engine is running.

2. Remains ON while the engineis running if malfunctioningoccurs.

CAUTION

When Service lamp is ON whilethe engine is running, theengines performancedeteriorates marginally andsometimes drastically. .Please getthe malfunctioning rectified at anearest authorized service outlet.

Door Open Warning:

Prior to driving ensure that all thedoor are properly closed. If any


20/142

18


INSTRUMENT CLUSTER

Low Oil PressureIndicator:

When the ignition key is turned tothe IGN position, symbol lights upand goes off as soon as therequired engine oil pressure isdeveloped after starting the engine.

If the low oil pressure indicator doesnot glow or remains ON with theIGN on and engine is running, itindicates a fault in the electricalcircuit/lubrication system. Check &

get the problem attended to at anAuthorised Service outlet.

Lock Indicator WarningLight :

This system disables the startermotor circuit, ignition supply andfuel cutoff solenoid supply. Thevehicle can be unlocked onlypressing the Unlock button of thecorresponding vehicle remote.

It will blink when vehicle isimmobilised condition. Unlock withremote and start vehicle.

Turn Signal:

Turn signal lamps can be operatedonly when the ignition supply isON and by using the turn indicatorswitch on the combi switch. Thedirection indicator arrow (LHS)and (RHS) on the instrumentcluster flashes along with externalindicator lights as selected.

High Beam Indicator:

Symbol lights up when theheadlamp high beam is ON.

at a TATA Authorised ServiceOutlet. Driving the car in thiscondition may cross theregulatory emission limit and / or

damage the catalytic convertor.

Water in fuel sedimenterindicator :(DICOR)

This light indicates excess wateraccumulation in the sedimenter. Itwill come on when ignition is turnedON and will go off in approximatelyfive seconds. When this lamp

remains ON, water needs to bedrained from sedimenterimmediately.

CAUTION

If water is not drained from thesedimenter, it can cause seriousdamage to the fuel injectionsystem.


21/142


INSTRUMENT CLUSTE

When ignition key is turned toIGN position, this indicatorlights up and goes off whenengine starts in normal

condition. If it continueously ONwhile engine is running, get theproblem attended to anAuthorised Service Outlet.

Seat Belt Indicator:

The indicator initially flashes witha buzzer for 6.5 sec.when the

ignition is ON and seat belt is notfastened. It will continue to flashuntil the vehicle exceeds a speedof 10 kmph. After that, it will remaincontinuously ON accompanied bya buzzer that will buzzapproximately for 100 seconds.After that, the buzzer goes OFF butthe indicator continues to remainON.

NOTE

Battery Indicator:

Symbol lights up when the IGN isturned ON and should go OFFafter the engine starts.

If it remains ON while theengine is running. It indicatesthat the battery is not gettingcharged. Switch off allunnecessary electricalequipment and get theproblem attended to at an

Authorised Service outlet.Parking Brake Indicatorcum Low Brake FluidWarning Light :

This indicator has multiplefunctions as follows :

It lights up when the parkingbrakes is applied and goes off

when parking brake isreleased.

It also lights up when brake fluidlevel is low.

Odometer and Trip meter (oLCD):

The odometer records the tot

distance the vehicle has beedriven. The trip meter can be useto measure the distance traveleon each trip or between fuel fillingKeep track of the odometer readin& follow the maintenance scheduregularly for meeting servicrequirements.

Odometer

Tripmeter orIntensity level ofpanel illuminatio

SETknob

MODEsellector

knob

DISPLAY FOR TRIP-A

DISPLAY FORTRIP-B


22/142

20


INSTRUMENT CLUSTER

NOTE

Odometer, Trip meter andIllumination intensity control oninstrument panel (LCD):

The instrument panel has an LCDto display the following :

Main Odometer (Non- resettable)

- Counts up to 999999 kms

Trip meter A (Resettable) -

Counts up to 1999.9 kms

Trip meter B (Resettable) -

Counts up to 1999.9 kms

Intensity level of instrument

panel illumination selectionamong preset levels.

LCD has two line display. The first

line displays the Odometer count.

The second line displays either of

Trip meter A, Trip meter B,

Intensity level of panel illumination.

The selection and control of

functions are done throughMODE and SET push buttons

(knobs) provided on either side of

the LCD. The MODE knob is usedto select one of the Trip meter A,Trip meter B OR Intensity level ofpanel illumination. Switching

among the above three functionscan be done by pressing the knob.

The SET knob is used to controlthe chosen function. Pressing theknob for a few seconds resets thechosen trip meter and varies theintensity level of instrument panelillumination.

The panel illumination intensityvaries among preset levels asfollows:

Intensity Level Indicator

= Min

= = = = Max

This display returns to Trip meter

A after a few seconds of intensitylevel selection, if left in this mode.

Main odometer and trip meter Aindication will remain on displayeven if the ignition key isremoved.

Low Fuel Indicator:

(Amber/Orange) :

It comes on when fuel level in lowand needs refill at the earliest.


23/142


RPM meter (if provided) :

The meter indicates engine speed in revolutions pminute (rpm) Change gears at appropriate engine rp

and vehicle speed to get optimum fuel economy. Tpermitted engine rpm upper limit is the start of ReZone on the dial.

Fuel Gauge:

The fuel gauge indicates the approximate fuel levelthe tank. Refill the fuel tank at the earliest, before thneedle touches the red band on the gauge. At thpoint, fuel level in tank is low and it is advised to g

fuel filled immediately

Temperature gauge:

The gauge indicates the temperature of the enginecoolant. The red zone at H indicates temperature

higher than the normal. Avoid driving, when the pointeris in the red zone. It indicates engine overheating,which may be due to insufficient coolant in the radiatoror due to any other defect. At this stage take the car tothe nearest Authorised Service outlet for necessaryattention.

Caution: Never remove the radiator pressure cap fromthe radiator when the engine is hot. Do not restart the

engine until the problem has been duly attended.

The speedometer: The speedometer indicates thevehicle speed in km/hr.

SpeedometerGX EX

Temperature Guage

High

Temperature

Warning

RPM meterGX EX

Fuel Guage

Low Fuel

Warning

Fuel Guage

Tem

Gua

GAUG


24/142

22


OPERATING SWITCHES

OPERATING SWITCHES :

Four operating switches areprovided on the console.

1 2 3 4

1. Rear Windshield Demister2. Hazard Warning Switch3. Rear Fog Lamp Switch4. Front Fog Lamp Switch

Rear WindshieldDemister :( Unlatched switch)This switch can be operated

when Ignition is ON. Demister isprovided to clear the visibility ofRear Windshield on tail gatewhen required. Push the rearwindshield demister operatingswitch to turn the demister ON.The demister will switch offautomatically after 15 minutes.

Rear Wind Shield Demister willwork effectively when battery isfully charged.

NOTICE

Clean the rear windshield glasscarefully from inside to avoiddamage to demister heaterelement.

Hazard WarningSwitch:

Hazard warning is used in case ofbreakdown especially during nightand vehicle has to be parked at theside of the road or vehicle beingoperated in adverse condition.This can be operated withoutIgnition ON. Press hazard warningswitch to switch ON. All outside turnsignal lights and indicators on

cluster will flash simultaneously towarn the other road users abouthazardous condition of the vehicle.Depress the switch to switch OFFthe hazard function.

CAUTION

Ensure that all turn signalindicators are working properly.

Get it rectified in case ofproblem.


25/142


OPERATING SWITCHE

Rear Fog Lamps :(Unlatched switch)

The fog lamps are provided on rear

bumper to improve the visibility andwarning in foggy weather or duringheavy rains. The rear fog lampscan be switched on with ignition andparking lamp and front fog lampsON and can be remain ON till theparking lamp is switched ON. Therear fog lamps can also be switched

ON even if only headlights are ON.NOTICE

Use only during foggy conditionsor heavy rains if required.

Front Fog Lamps :( Unlatched switch)

The fog lamps are provided on

front bumper to improve thevisibility in foggy weather or duringheavy rains. The front fog lampscan be switched ON with ignitionand parking lamp ON and can beremain on till the parking lamp isswitched ON.

NOTICE

Use only during foggyconditions or heavy rains ifrequired.


26/142

24


STEERING LOCK CUM IGNITION SWITCH

Steering Lock cum IgnitionSwitch:

Key of ignition switch is common fordoor lock, steering lock and glove

box lock.The ignition switch is on the rightside of the steering column. For yourconvenience, to locate ignition key inthe dark, there is an illuminated keyring around the switch that lights upwhen drivers door is opened It dimsout (like the Roof Lamp) once thedoor is closed.

The ignition switch has four positions.Turn the key clockwise for furtherfunctions.

LOCK - Steering Locked

OFF - KEY IN position.

IGN - All electricals ON

START - Engine crank

LOCK:

You can insert or remove the key onlyin this position. The steering columnis locked when the key is removed.

WARNING

Do not remove the key whiledriving. It will lock the steeringand can cause loss of control.Remove the key only when thevehicle is parked.

OFF (key IN):

By turning key to OFF (key in)position. KEY IN driven load likemusic system will be ON.

IGN:

All electricals and accesories ON.

START :Turn the key further clockwise to theSTART position (spring loaded) tostart the engine. As soon as the

engine starts release the ignition keyto ON position. While cranking, allaccessories will be momentarilyOFF.

NOTICEDo not crank the engine more than10 secs. continuously. If the enginedoes not start wait for 30 secs.before cranking it again. Releasethe key immediately after startingthe engine otherwise starter motor/flywheel ring may get damaged.

By turning the ignition key from IGNposition to OFF position, enginecan be stopped.

NOTICE

When drivers door is opened,the key ring is illuminated andgoes off slowly (similar to atheatre effect) when the door isclosed.

T G d A Gl


27/142


COMBINATION SWITCH

T t G d At Gl


28/142

26


COMBI SWITCH

A) RIGHT HAND STALK

1) Head lamp leveling rotaryswitch:

Inner rotary switch on right hand

stalk is provided for head lampleveling. Setting is done by rotatingthe knob to select one of the 3 levelpositions depending upon theloading of the vehicle. Head lampleveling can be done with headlamp in Low Beam and in ONposition.

Setting should be done onlywhen vehicle is stationary

NOTICE

Since the leveling switch takescare of headlamp focus patternunder varying load conditions, itis advisable to select the correctposition before starting a trip(depending on load)

2) Light stalk:

Outer rotary switch on right handstalk is provided for selectingPosition or Head lamp High/Low

beam. It operates with Ignitionswitch in IGN position.

a) Head / Position lamp OFF.

Head lamp, position (Parking) lampand tail lamp will be OFF in thisposition.

b) Position lamp in ON.

Position (Parking) lamp and tail

lamp will be ON in this position.

c) Head / Posit ion lamp ON.

Head lamp, position (Parking) lampand tail lamp will be ON in thisposition. Toggling the lever (Stalk)



29/142


COMBI SWITC

Turn (Self cancellation / Manualreturn type)

LEFT HAND STALK:

1) Rear windshield - Wipe &Wash rotary switch:

Outer rotary switch on left handstalk is provided for rear windshieldwipe & wash. The top (1st) positiondenotes wash, which is springloaded. After releasing, the switchreturns to the OFF position. Firstposition below OFF position is for

Wipe and second position is forWash + Wipe which is springloaded.

A

B

C

in upward direction changes theLow beam to High beam and viceversa. For High beam flash, pull thelever halfway. For keeping the in

High beam position pulls up thelever further up to latch.

3) Light stalk (Side Indicator):

Push the stalk upwards forchanging lane or turning to Left anddownwards for changing lane orturning to Right according torequirement. It has three positions.

A) Side indicator OFF

B) Lane change for Left or RightTurn (Spring Return)

C) Lane change for Left or Right

2) Intermittent front wiper dela

Inner rotary switch on left hand stais provided for intermittent frowiper delay. The switch has 5 delatimers for intermittent function.

3)Front windshield-Wipe & Wasrotary switch:

Pull the stalk upwards to operaintermittent wipe (- - -), Slow wip( ) or fast wipe ( ). Pull th



30/142

28


ANALOG CLOCK & MUSIC SYSTEM

Tweeter Location on dash board

Speaker Location on doors

Antenna: The antenna is locatedover the inner rear view mirror.

Music System :The music system is provided onthe facia & the speakers are fittedon doors and tweeters on

dashboard.

Music System

stalk down for wipe and wash. Pulltowards driver for Flick Wipe(spring return).

NOTICE

After wash function is activated,there will be three wipes of wiper.There will be one more wipe after5 seconds to clean traces ofwater on wind screen.

Analog Clock :

The vehicle is fitted with an analog

clock on the center console. It hasa knob at the bottom of the dial forresetting the time.

SettingKnob

For operation and moreinformation of music systemplease refer manufacturers

manual.



31/142


HEATING, VENTILATION & AIR CONDITIONIN

Central Console

A.C. Controls

A B CD E

A - Air Direction Control Knob

B - Temperature Control Knob

C - Blower Speed Regulation Knob

D - A.C. ON/OFF Switch

E - Air Recirculation / Fresh Air Switch



32/142

30


HEATING, VENTILATION & AIR CONDITIONING

A. Air Direction Control Knob :

The air flow can be changed byturning the knob (A) to the desired

direction.

B. Temperature-Control Knob :

The air temperature in the vehiclecan be controlled by operating thetemperature control knob (B) onthe control panel. The temperaturecan be increased by rotating theknob towards the red segment anddecreased by rotating it towardsthe blue segment.

C. Blower Speed RegulationKnob :

The HVAC system has a four

speed blower. The blower speedscan be regulated to any one of thefollowing speeds by operating theblower knob (C) centre of thecontrol panel.

Tow ards face

Tow ards face and f eet

Tow ards feet

Towards feet & w indshield

(Recomm ended for clearingmist on windshield)

Air demist/defrost windshield(Recomm ended for clearingheavy fog or snow



33/142



D. A.C. ON/OFF Switch :The A.C. can be switched ON bypressing the switch (D) on the A.C.control panel provided the blower

is ON and the engine is running.The indicator lamp will show thatthe A.C. is `ON.

Indicator

E. Recirculation / Fresh AirSwitch :Q In HVAC version to put air

circulation mode inrecirculation, press switch 'E'.The indicator lamp will show aircirculation is in recirculation.

Q To put vehicle in Fresh mode

release switch 'E'. Indicatorlamp will be 'OFF'.

Q In recirculation mode, air insidethe vehicle is circulated againand again. In Fresh mode, airis taken from atmosphere and

circulated in the vehicle.Recirculation mode can be used

Q While driving in dusty condition

Q To avoid traffic pollution

Q To get quick cooling/heating asrequired.

Whenever discomfort is felt switch

air circulation mode to fresh.

NOTICE

Q The A.C. can be switched`ON' only if the blower is 'ONand engine is running. WhenA.C. is switched 'ON' engineidling RPM increasesmarginally, to adjust to theA.C. compressor load. Whendesired temperature isachieved A.C. trips 'OFFautomatically.

Q The A.C. compressor gets

switched 'OFF' automaticallywhen engine gets overheatedThe A.C. is automaticallyswitched 'ON' when theengine cools down.

Indicator



34/142

32


Normal Heating :(For vehicles fitted with HVAC &Heating system only)

Knob 'A' - Towards face & feetKnob 'B' - Suitable temperaturepositionKnob 'C' - Suitable blower speedA.C. - OFFAir Circulation - Fresh switch

Quick Heating :

All settings as explained beforeexcept air circulation switch torecirculation.

Once vehicle is heated, switch backto fresh mode.

Normal Cooling :

A.C. - ONKnob C - desired speed positionKnob A - towards faceSwitch E - suitably as explained

Quick Cooling :

Switch ON the A.C. and keep the

blower at maximum speed. Keepair direction in face mode. Allvents should be openedcompletely.Keep the air circulation

switch in the recirculation modeand temperature control switch inthe maximum cooling (Blue)position. At maximum cooling, A.C.trips off automatically when thedesired temperature is achieved.

Q In case you find reduction inair flow or foul smell in the

passenger compartment cleanthe evaporator

Demisting :

In this mode, air flows out fromFeet and Windshield vents. TheFRESH air mode and AC ON isautomatically selected. TheFRESH air indicator will beselected and AC indicator will turnoff.

In this mode, switching to


Recirculation mode or turning offAC is not permissible. This is asper programmed logic (inbuilt).However, status of AC ON

condition (Blue LED indicatorcomes on) can be turned on bypressing AC button. AC ismaintained in ON conditionregardless of whether or not theAC indicator is ON. This is a safetyfeature to avoid flash fogging ofwindscreen in humid condition.

The fresh air indicator will givewarning signal by blinking indicator3 times in case of attempt to turnthe setting to Recirculation mode.This is as per programmed logic(inbuilt).

Defrosting :

In this mode, air flows out fromWindshield vents only. The FRESHair mode and AC ON isautomatically selected. The



35/142



FRESH air indicator will beselected and AC indicator will turnoff. This setting clears the frontview quickly.

In this mode, switching toRecirculation mode or turning offAC is not permissible. This is asper programmed logic (inbuilt).However, status of AC ONcondition (Blue LED indicatorcomes on) can be turned on bypressing AC button. AC ismaintained in ON conditionregardless of whether or not theAC indicator is ON. This is a safetyfeature to avoid flash fogging ofwindscreen in humid condition.

The fresh air indicator will givewarning signal by blinking indicator3 times in case of attempt to turnthe setting to Recirculation mode.

This is as per programmed logic(inbuilt).

Operating Tips:

Demisting

The inside of the windshield. For

the best results, set controls asfollows:

Fan speed - To the desired fanspeed

Temperature At sui tabletemperature

Air Direction Full Demist/Defrostmode

When moving to Full Demist/Defrostmode, the air intake selects FRESHand AC gets ON automatically. Thisis to clean up the front view quickly.

Defrosting

- The outside of the windshield. Forthe best results, set controls asfollows:

Fan speed - To the desired fanspeed

NOTICE

Temperature Towards higtemperature

Air Direction Full Demist/Defromode

When moving to Full Demist/Defromode, the air intake selects FRESand AC gets ON automatically. Th

is to clean up the front view quick

Ventilator :

The air flow can be adjustecontinuously with the rotary contr

knob at the vents on the dasboard. The air vents can be adjusteupward and downward.

Refrigerant charged in the aiconditioning circuit has beeidentified on the label over fronbody member. Use onl

refrigerant as given in the labefor topping up or recharge, i.edo not charge R12 (CFC) in the



36/142

34


speed. four adjustable air vents areprovided on roof. Air flow anddirection can be adjusted on eachair vent.

NOTICE

vehicle earlier charged withR134a (Non CFC) or vice versa.

Fresh air is taken from the grill

opening provided at base ofwindshield glass outside thevehicle. Keep these openingsclear and free from fallen leavesetc.

AC Gas charging Quantity shouldbe 700 + 20 gms. (R 134a - Non

CFC)

Rear AC:

Rear AC is provided for rear seatspassengers. When front AC is ON,it will provide cool air from front AC.When front AC is OFF, it can beused as blower (supplying normalair). Rear AC switch is providedon roof and can be used to switchON the blower and select the blower



37/142

LAMP

Head Lamp:Head lamps are clear lens typehaving multi focal reflector and are

1 Main/Dip Beam2 Position/Parking Lamp3 Direction Indicator

provided with H4 halogen lamp withdouble fitment for providing straightahead illumination of the road forthe long distance or deep beamwhich illuminates the roadimmediately ahead for short

distance visibility. It also containsside indicator lamp and a parkinglamp.

Tail Lamp:The tail lamp assemblyincorporates the following

1 Reverse Lamp2 Direction Indicator

3 Tail / Brake LampSide Repeater Indicator Lamp

Front Fog Lamp

Rear Fog Lamp

Fog Lamp :

Front and rear fog lamps aprovided for your convenience anthey can be operated by rotatin

the Selector on Combi switch.



38/142

36

LAMPS

High Mounted Stop Lamp:High mounted stop lamp isprovided on the tail gate, and itglows whenever service brake is

applied.

Registration Plate Lamps:Two concealed lamps are providedfor illumination of the rearregistration number plate.

Door Lamp :

These are provided on the innerside of the front and rear doors towarn the traffic coming from therear that the door is open.

Door Ajar Lamp :

This is provided on the bottom sideof the doors to assist the user foreasy entry and exit during night.

Engine Compartment Lamp :

This lamp is provided for yourconvenience.

High Mounted Stop Lamp

Registration Plate Lamps

Engine Compartment Lamp



39/142

Front interior light with readinglamps:

Interior roof lighting and readinglamps with inbuilt switches are

provided on the roof near the rearview mirror.

The central rectangular switch hasthree positions:ON - The lamp will come ON as longas switch is in this position.DOOR - In this position the lampcomes on when either of the doors areopened. When the door is closed, the

lamp will not go OFF immediately, butremain ON for 5-8 sec. This helpssettling in the seat and inserting the key

in the ignition switch. When the key isturned to the IGN position, the lampgoes OFF immediately with unlockpulse it will come ON, if it is kept atDOOR position..

OFF - In this position the lamp will notcome ON at all. Two rectangularshaped push type ON / OFF switchesare provided separately for the right andleft reading lamps.

Rear roof lamp :

A roof mounted lamp is provided abovethe rear seat. It has following threepositions :

ON, DOOR & OFF

The function of this switch is similar tofront interior light.

LAMP

Left Right

Middle

Follow me home Headlamps

When the parking lamp switch iOFF and key is not inserted, then the headlamp flash input is mad

active 9by pulling right hand stalk), any of the doors is opened within 2sec., the headlamp low beam will turON for 1 minute to help you to reacyour destination in the dark.

If any of the doors is NOT openewithin 20 sec., then the head lambeam is turned OFF in 20 sec. Thremote lock operation will be ignore

within 60 sec. for follow me conditionIf lock input comes after 60 sec., thethe head lamp beam will be ON foanother 30 sec. after which healamp ON time can not be extendeagain with remote lock input. Thmaximum time in which the healamp ON time can be extended aftehead lamp flash input is 5 minutes.



40/142

38

SUNVISORS & GRAB HANDLE

Sun visors:

Two adjustable sun visors areprovided inside the cab above thewindshield to prevent sun glare.

Lower the sun visors to protect theeyes from bright sunlight. The sunvisors can also be moved sidewaystowards the door.

A vanity Mirror has been providedon the back of the Co-driverssunvisor.

Roof Grab Handle :

These are provided on all seatsexcept driver seat. This helps incomfortable positoning of

passengers during journey.

NOTEWhen not in use keep the

sunvisors in their original positionotherwise they may block thedrivers vision.

Sunvisor

Vanity Mirror

Goggle Case :

A goggle case is provided nearinner rear view mirror for keepingthe goggle. Pull the cover to open,place the goggle (keeping glassfacing towards antidust cloth) andpress to lock.



41/142

REAR VIEW MIRROR

Motorised Outer Rear ViewMirror :

Motorised Rear View Mirrors arefitted on both front doors and canbe adjusted to the desired positionwith the help of a switch providedon the driver side door. The switchfacilitates the driver to adjust themirrors without lowering the windowglasses and without moving fromhis/her position.

1. Move the main switch to L (for

adjusting left side mirror) andR (for adjusting right sidemirror)

2. Use the 4 positions of the knobto adjust the rear view mirrorsto correct angles.

NOTE : Manually adjusted outer

rear view mirror are also availablein few version

Inner Rear View Mirror:

Antiglare mirror The antiglaremirror is fitted inside the cab.Provision has been made for two

positions:1. Normal position2. Antiglare positionUse antiglare position only whennecessary, as it reduces rear viewclarity.

1. Inner Rear View Mirror2. Operating Knob

Motorised Outer Rear ViewMirror

Mirror Adjustment Switch



42/142

40

GLOVE BOX, CUP HOLDER & UTILITY POCKET

Glove Box:The glove box is located on thedash board in front of the co-drivers seat. The glove box can

be locked with the ignition key.

Cup holder :

Two cup holders are provided inthe glove box lid for yourconvenience.

Cup holder

Utility pocket / box :

Utility pocket is provided to all thedoors to keep magazines / booksetc.

Front utility pocket / box

Glove Box

Rear utility pocket / box



43/142

CIGARATTE LIGHTE

Floor Console :

Cigarette Lighters:

Two cigarette lighters are providedon floor console at front and rear.

Press the cigarette lighter in thesocket to heat up. When it reachesthe desired temperature, it will popup and can be used. These lighterswill operate only when Engine isON or Ignition key in ON position.

CAUTION

Handle the lighter carefully toavoid personal injury.

If lighter does not pop out,remove it to avoid overheating.

Avoid smoking inside thevehicle; it may spoil insideambience, interiors, upholstery

etc.

Cigarette Lighter for front passengers

Cigarette Lighter for Rear passengers



44/142

42

WINDOW GLASS

Power Windows

Glasses on all four windows of yourvehicle can be operated by switchesprovided on the main control panel

located on the drivers arm rest. Theywork only when the key is in the IGNposition.

Glasses are wound up by pulling theswitch and are lowered by pressingit down.If you would prefer to have theglass at its lower most position, pressthe switch down a little longer and theglass glides down. This feature isknown as Express Down.

A safety locking arrangement hasalso been provided and can beactivated by a push type switchlocated at the centre, below thewindow switches. It has two positions:

LOCK When switch is pressed

UNLOCK When switch is released

When the switch is in LOCK

position, the rear window switches(located on rear doors) do notfunction. The rear window glasses can

Power window switch (On RearDoors): Individual window windingswitches have been provided onlyon the rear doors.

To close the door window glass pullthe knob up and to open, push theknob down.

If key is taken out, power windowscan be operated within 30 sec.without giving IGN.

still be operated by using theswitches on the console. Illumination

on the rear window switch goes offwhen the switch is in locked condition.Press down the lock button to unlock.

Individual window winding switcheshave been provided only on otherdoors.

WARNING

While raising the glass, take careto avoid fingers / hands getting

trapped between glass and theframe.



45/142

WINDOW GLASS & STEERING ADJUSTMEN

Manual window winding :

In few versions, power windows arenot provided. In such vehicle, usewinder handle manually for

lowering down or raising up windowglasses.

Rear Side Window Glasses :

Butterfly windows are provided onboth rear sides of vehicle to provideventilation for 3rd row occupantswhen required. Pull the toggle tounlock and open the window. For

Toggle

locking, pull toggle lever and pressit to lock.

NOTICE

It is advisable not to open thewindows when AC is ON. This willadversely affect the ACperformance.

Steering Wheel PositionAdjustment

You can adjust the steering wheelposition to suit your convenience.

Adjust the steering wheel positionas follows before you start driving.

1. Adjust the seat to a comfortableposition.

2. The lever to tilt the steeringwheel is under steering column.Pull the lever up and hold in thatposition.

3. Move the steering wheel up ordown to the desired position.

Position the wheel such a wathat all the instrument pangauges and warning lights avisible.

4. Release the lever. Make suthat steering wheel is securelocked by moving up and dow

CAUTION

Steering wheel should beadjusted only when the vehicleis stationary.

Steering Adjustment Lever

Tata Grande At a GlanceFUEL FLAP OPENING


46/142

44

FUEL FLAP OPENING

Fuel Tank flap opening:The fuel flap is located on the leftrear side of the vehicle. The fuelflap can be opened by pulling the

opening lever located at the righthand side of the drivers side forRHD vehicle & left hand side forLHD vehicle

WARNINGFuel vapour is extremelyhazardous. Always stop theengine before refueling and

never refuel near sparks or openflames.

CAUTION

Remove the fuel filler cap slowly,and wait for any hissing to stop,then remove it. The fuel may beunder pressure & may sprayout, causing injury if the cap is

opened suddenly.

Fuel Flap Openning Lever

Always use only originalspecification fuel cap or anapproved equivalent, available atAuthorised Dealers. The wrong

cap can result in a seriousmalfunction of the fuel systemand the emission controlsystem.


GEAR SHIFT LEVER & PARKING BRAK


47/142

NOTICE

Gearshift lever & shiftingpattern:

The gearshift lever is mounted onthe center console between the two

front seats. The gearshift patternis shown on the gear lever knob.

The reverse gear should beengaged only when the vehicleis stationary. Wait for 5 secondsafter declutching to ensuresmooth engagement of thereverse gear.

Parking brake:Mechanical parking brake actingonly on the rear wheel is providedon your vehicle. The parking brakelever is located behind the

gearshift lever. To apply theparking brake, pull the lever upfully. The indicator light on theinstrument panel will become ON.To release it, pull the lever upslightly, press the release buttonand push the lever down. Theparking brake indicator on theinstrument panel will go OFF whenthe parking brake lever is fully

released.

1. Release Button

2. Parking brake lever

A. Applied Condition

B. Released Condition

GEAR SHIFT LEVER & PARKING BRAK

NOTICE

Q Apply the parking brakeproperly before leaving thevehicle & release it beforemoving.

Q When parking on a steepslope, do not rely on the handbrake alone to hold thevehicle. Leave the vehicleparked with gear box in lowforward gear when facinguphill and reverse gear whenfacing downhill.


Anti Theft/ Immobiliser cum Keyless Entry System (If fitted)


48/142

46


ANTI THEFT / IMMOBILISER CUMKEYLESS ENTRY SYSTEM :

This system is essentially an anti-theft security system, which has a

keyless operation for door unlock/lock. It immobilizes the vehicle bydisabling starter motor, ignition andfuel supply in case of unauthorisedentry.

The system consists of follow-ing :

1. One User "Remote" withLOCK

and UNLOCK button fornormal use.

2. Body Control Module (BCM).

3. "Lock Indicator Warning" oninstrument cluster for indicationof "mode" of the system.

Features :

Q Locking/ unlocking the vehicle

from distant place. (Refer armmode)

Q Immobilisation of vehicle andcontinuous flashing of turnindicators and hooting, if theftis detected (Refer Armed

Panic).Q Protection when user forgets to

lock using remote.(Refer AutoArm Mode).

Q Immobilisation of vehicle if theftis detected in Auto Arm mode.(Refer Auto Arm immobilised)

Q Finding the vehicle. (Refer carseek).

Q Manual central door locking/unlocking (Refer central doorlocking feature).

Q Unlocks all doors in case of anaccident. (In case of vehiclecrash)

Q Continuous flashing of turnindicators and hooting (Refer

Forced Panic).


Anti Theft/ Immobiliser cum Keyless Entry Syste


49/142

Anti Theft/ Immobiliser cum Keyless Entry Syste

Q Auto lock and unlock optionalfeature on some vehicles.(Refer Auto lock and unlock).

Q Additional/ new remote can be

added. Stolen remote can bedisabled. (Refer LearningAdditional Remote / UnlearningLost Remote).

MODES OF THE SYSTEM :

MODE MODE INDICATION VEHICLE STATUS

1 LOCK (To lock the vehicle) Turn indicators two f lashes Vehicle gets lockedPress LOCK on the remote and LOCKLED starts blinking

2 LOCATE (To loacate the vehicle Turn indicators give three Vehicle gets lockedin the park) Press LOCK button flasheson the remote after locking thevehicle by remote LOCK pulse

3 UNLOCK (To unlock the vehicle) Turn indicators give single Vehicle gets lockedPress UNLOCK button on the flash.remote

4 FORCED PANIC (To seek for Turn indicators start flashing During this mode vehiclehelp)- Press LOCK or UNLOCK along with hooting. To stop remains in the previous

button simultaneously hooting, flashing, press LOCK state i.e. LOCK / UNLOCKor UNLOCK button on the state.remote




50/142

48


DESCRIPTION OF MODES ANDUSAGE OF "REMOTE" ARMMODE:

Used to lock the vehicle from Dis-

tant place (Do not use Mech. Key).Press "LOCK" on User Remote.

Q Gives two flashes. Locks alldoors.Gives delayed flashthrough turn indicators afterlocking.

Q Lock Indicator on instrumentcluster starts blinking (typically

once in 1.5 sec)The vehicle arms (i.e. Vehiclecannot be driven.If attempted, thesystem goes to immobilisedMode).Press UNLOCK to disarmthe vehicle.

UNLOCK/ DISARM MODE :

Used to UNLOCK the vehicle fromDistant Place. (Do not use Me-chanical Key)

Press UNLOCK on User Remote.

Q Gives one flash on turnindicators.

Q Unlocks all door.

Q Lock Indicator on dashboardstops blinking and remain OFF.

Q The vehicle disarms (User candrive the vehicle).

NOTE : To disarm the vehicle,unlock button must be pressedbefore turning the key to ignitionposition.

This procedure ensures userauthentification.

ARMED PANIC MODE :

In Armed Mode, if Theft is detected(door opened/Key inserted inignition switch/cranking attempted)

vehicle immobilises and flashes theturn indicators for about 25 to 30seconds (To stop the flashing pressany button on the user Remote;Hooting gets enabled along withflashing for 30 sec.

AUTO ARM MODE :

Protection when user forgets to lockthe vehicle using remote.

Q In Unlock mode, after the keyis taken out of the Ignition switchand leaving the vehicle (door isopened and closed), vehiclearms automatically in 55 sec.,(i.e. Vehicle cannot be drivenwithout pressing UNLOCK

button on the User remote. Ifattempted, vehicle goes to autoarmed immobilised mode)


Anti Theft/ Immobiliser cum Keyless Entry System (If fitted


51/142


Q As an additional securitymeasure, the system has a backup facility. In Unlock modeafter taking the key out of

Ignition switch, the vehicle armsautomatically in 4.5 sec., evenif no door activity is detected.

Q The Lock Indicator on theinstrument cluster starts blink-ing once in 1.5 seconds.

When Lock Indicator oninstrument cluster is blinking, thevehicle cannot be driven.Press

UNLOCK to disarm the vehicle.

AUTO ARMED IMMOBILISEDMODE :

In Auto Armed Mode if Theft isdetected (Key inserted in ignitionswitch/or attempt to crank)

Lock Indicator on the dashboardstarts blinking at faster rate and thevehicle immobilises. When LockIndicator on instrument cluster is

blinking the vehicle cannot bedriven. Press unlock to disarm thevehicle.

CAR SEEK :

Used to locate the vehicle.Press LOCK on User Remotewhen the vehicle is locked.(Range7.5 meters max.) approx. fromvehicle.

Q Gives three flashes on turnindicators and remains locked.

FORCED PANIC MODE :

Q Press LOCK and UNLOCKon User Remote simultaneously.

Q Hooting and flashing will startcontinuously.

CENTRAL DOOR LOCKINGFEATURE :

All doors can be locked/unlocked

by manually locking / unlocking thedrivers door (using mechanicalkey/knob)

Press any button on the remoto stop flashing.

AUTO LOCK AND UNLOCK :

(When driving the vehicle)

1. New locking strategy : Wheever vehicle is cranked anengine is fired, all doors will blocked automatically once vehicreaches above 10 kmph providethey are closed properly. If any onof the doors is open, then lockiwill not take place.

2. After the key is taken out fromthe Ignition switch, the systemautomatically unlocks the adoors.




52/142

50


EMERGENCY DISARMINGPROCEDURE :

THIS PROCEDURE ISAPPLICABLE IN CASE OF LOST

REMOTE & SYSTEM IN ARMED /IMMOBILISED STATE I.E. CLUS-TER LED IS BLINKING

1. Enter the vehicle by openingthe door through physical key& close the door.In case thevehicle is in armed condition,the system will enter armedpanic in immobilised state-will

hoot (if provided) and flash formax. 27 seconds.

2. Open driver door or turn onhazard switch.

3. Turn ignition ON and OFF 3times within 5 seconds.

4. On successful completion ofstep 3, the sysytem will come

out of the immobilised state toenter emergency dis-armingstate. (This state is similar to

the immobilised state withoutthe hooting and side indicatorflashing).The left and rightindicators will remain ON for 5sec. and will go OFF after that.

NOTE: If step 3 is notcompleted within 5 seconds thesystem will remain inimmobilised state and the leftand right indicators will notcome ON as in point no.4.Close the drivers door andfollow the step no. 2

5. Then the left and right indica-tors start flashing (ON /OFF)for max. 9 counts the user.Must count the number offlashes and turn ignition ONas soon as this count matchesthe first digit of secretcode.The left and right indica-tors will stop flashing.

6. Switch OFF the ignition.7. The user must enter the 2nd,

3rd and 4th digit of the secretcode in a similar fashion asdescribed in step 6 & 7 above.

9. After successful entry of all the

four digits of secret codes thecluster left and right indicatorsstops flashing. The system willdis-armed and vehicle will get

mobilised.

9. Close driver door or turn OFFhazard switch.

10. In case of any error in enter-ing the secret code digits the

left and right indicators con-tinue to flash and the systemremains in immobilsed state tore-enter secret code. Performstep 10 and start thep r o c e -dure from step2 onwards.

11. All previously learned remoteswill get unlearnt.

12. Vehicle engine is released for5 cranks only.




53/142


13. The vehicle can be crankedand driven.

LEARNING OF NEW REMOTE :

THIS PROCEDURE IS APPLI-

CABLE IN CASE OF LOSTREMOTE & SYSTEM IN ARMED/AUTO ARMED/IMMOBILISEDSTATE I.E. CLUSTER LED ISBLINKING.

Step 1-12 mentioned above, shouldbe completed successfully andthen follow steps 1,2 below, within30 sec.

1. Open driver door (OR turn ONhazard switch).

2. Parking light should be OFF.

3. Turn ignition ON & OFF 5times within 10 sec.

4. The system enters the learnmode. The left and rightindicators remain ON for 30

sec.5. Press any key on the remote

once within 5 sec.

6. On successful learning of theremote, system gives singleflash.

7. Repeat step 4 & 5 above forlearning other remote (Max.4remotes)

8. Learning mode will be exited in30 seconds, if any of theremotes is not learnt during thistime. The learning process hasto be repeated.

CHANGING OF SECRET CODE :

THIS PROCEDURE ISAPPLICABLE IN CASE WHENTHE USER WANTS TO CHANGETHE SECRET CODE.

CHANGING OF PIN WILL BEPOSSIBLE WHEN IMMOBILISERIS IN UNSET STATE OR REMOTEKEY ENTRY IN UNLOCK STATE

1. Press UNLOCK button from theremote.

2. Switch ON the parking lights.

3. Turn ignition ON and OFFtimes within 5 sec.

4. If step 3 is not completed withfive seconds, the left and rig

indicators will not become Oas is case 4. Switch OFF thparking light and follow step 2onwards.

5. The Left and right indicatostart flashing (0.5 sec. ON / 0sec. OFF) for max. 9 counts.

6. The user has to enter thexisting secret number. Th

user must count number of leand right indicators flashes anturn the ignition switch ON asoon as the count matches th'1st' digit of the existing secrcode. On successful entry, tright and left indicators will stoflashing.

7. Switch OFF the ignition.




54/142

52


8. The user must enter the 2nd,3rd and 4th digit of secret codein similar fashion as describedin step 6,7 and 8 above.

9. After successful entry of all the4 digits of existing secret code,the left and right indicatorsstops flashing for 10 sec.

10.If a wrong secret code isentered, the LED continues toflash and the system remainsin immobilised state. To re-enter secret code, switch OFF

the parking lights and startprocedure from step 2onwards.

11.Repeat steps 7, 8 and 9 but withthe new 4 digit number. Thedigits to be entered can be from1 to 9. After successful entryof all 4 digits of new s e c r e tcodes the left and right

indicators stops flashing for 10sec.

12.Again repeat the steps 7,8 and9 with the same new 4 digitnumber. After successful entryof all the 4 digits of new secretcode, the left and rightindicators stops flashing for10 sec.

13.If the new secret code enteredtwice is not matching then theflashing of side indicators willstart for 5 sec. To restart theprocedure of entering newcode, steps from 12 onwards

to be performed. The left andright indicators starts flashingafter 10 sec.

14.If secret code entered twice ismatching then the system givesinformation of newly enteredcode with the equivalentnumber of left and rightindicators flashes for each

digit, with a 5 sec. gap betweentwo digits.

15.Switch OFF the parking lights.

16.The newly entered secretnumber to be used here afteremergency dis-arming and

remote learning.NOTE : No remote will get unlearntwith this procedure.

During this procedure any keypressed from the remote will beignored.

REPLACEMENT OF REMOTEBATTERY :(replace every year for normal use)

1. Place the remote button-sidefacing down and removescrews.

2. Change the battery withGOLDEN POWER Battery GP23A or equivalent (eg:- DuracellMS21/ MN21).

3. Put back the screws.

4. Press any button and checkthat the LED on the remoteglows.


Anti Theft/ Immobiliser cum Keyless Entry System (If fitte


55/142

y y y (

GUIDELINES FOR USER :

Q The vehicle does not start(Engine does not crank/fire)Check the Lock Indicator on

the dashboard. If it is blinkingthen the vehicle is not supposedto start ( Arm Mode/Auto ArmMode). Press UNLOCK buttonon the User Remote and thenstart the vehicle.

If the turn indicators are blink-ing, pressing the UNLOCKbutton of the User Remote will

stop the blinking of the lamps.The next pressing of theUNLOCK button of the UserRemote will unlock / disarm thevehicle and then the vehicle canbe driven.Contact the dealer ifthe vehicle still could not bestarted.

Q Pressing UNLOCK/LOCK

does not UNLOCK/LOCK thevehicle.

If the turn indicators are blink-ing, pressing UNLOCK / LOCKwill stop the blinking of lamps.The next UNLOCK / LOCKpress will actually unlock /disarm the vehicle and thevehicle can be driven.

Q Battery Low Indication :

1.Operating Distance has comedown

2. LED on user remote flasheswhenever UNLOCK / LOCKbutton is pressed on the remote

(under normal batteryconditions, the LED on the userremote lights continuouslywhenever UNLOCK / LOCKbutton is pressed).

3. Replace the battery to get increased range.

Q Press any of keys on remote,

if LED of the remote iscontineously 'ON' means

battery is OK. If it is blinkinthen remote battery is to replaced.

NOTE : Remote may not

operative in near transmissivicinity of high power anten(Like TV)

KEYS & DOOR LOCK

Getting Started


56/142

54

Front Doors (Driver & Co-driver)

Locking / unlocking doors withkey from outside :

Both front doors (drivers & co-driver) have separate lockingfacility. Front doors can be lockedor unlocked from outside with key.

Insert the key and turn it anti-clockwise to open or clockwise tolock the door. Pull the Door handle

to open an unlocked door.

Keys:

The key operates all locks andIgnition switch.

A code number is stamped on the

plate attached to the key set.Detach this plate and store at safeplace (Not in the vehicle). Thisreference number is necessarywhile getting duplicate keys fromyour Authorised Dealer. Itadvisable to keep another key atsafe place for use in case ofemergency.

NOTICE

Do not use locally made keys,get duplicate key through yourauthorized dealer.

Locking without a key frominside:

All the doors can also be locked orunlocked independently frominside by pressing or pulling theknob (1).

NOTE

When locking doors this way, donot leave the key inside thevehicle.

DOOR LOCK & CHILD LOC

Getting Start


57/142

Opening the doors from inside :

All doors can be opened frominside. To open pull the dooropening lever / latch (2).

Childproof lock :Both the rear doors of the vehicleare provided with child proof lock.Push the lock lever located onvertical face near the lockdownward before closing the door.The door which has been lockedcannot be opened from inside, itcan be opened only from theoutside.

Tail gate Locking / Unlocking

Insert the key and turn it anclockwise to open or clockwise lock the door. Pull the Door hand

to open an unlocked door and juby closing the tail gate to its originposition, it gets locked.

Location of door opening lever/latch

Tail gate Swing Handle

CAUTION

Deactivate the childproof lockwhen not required.

SEAT ADJUSTMENTS

Getting Started


58/142

56

Seats :

Bucket type seats are providedwith a lever and recliner handleknob, to adjust seat positions.

Lumbar Support :The lumbar support is provided togive you maximum driving comfort.and adjusted by the lever (1)provided at the side of the seatbackrest.

Seat Back Recliner :

To change the seat back angle,lean forward slightly and raise the

lever (2). Then lean back to theposition you want and release it.Make sure that lever return to itsoriginal position.

Moving the Seat Forward &Backward:

To adjust the seat position, lift thelever under the seat cushion front,then slide the seat to the desiredposition and release the lever.Once the desired position is

achieved release the lever to lockthe seat. Make sure the seat islocked in position.

Height Adjustment (DriversSeat):

Drivers seat height can beadjusted by a lever located on theseat base on the right hand side,just ahead of the seat backadjustment lever. You can raise theseat height by pumping / pullingthe lever upwards until appropriateseat height is reached and lower it

by pumping / pushing the leverdownwards.

1. Lumbar Support

2. Seat Back Recliner

3. Seat Height Adjustment Lever

4. Lever for forward/backward movement

5. Utility Tray (C0-driver Side)

2

4

5

1

SEAT FOLDIN

Getting Start


59/142

Poor Adjustment Good Adjustment

Head restraint :

Adjustable head restraints areprovided for bucket seats in front.Neck rest for rear bench seat

(Crew cab) cannot be adjusted. Toincrease the height lift up and leaveat desired click position. To reducethe height, press the unlock button& push the head restraint downwards.

CAUTION

Avoid driving the car with thehead-rest removed as it is asafety item. Do not attempt toadjust the head-rest while drivingthe vehicle.

REAR SEAT ADJUSTMENTS

Getting Started


60/142

58

REAR SEAT ADJUSTMENTS

Middle seats-Split type (if fitted)

Middle row seat is in 2 parts i. e.60 / 40 split. Two adjustable neck

restraints are provided on themiddle row seat. Foldable arm restis provided in centre of the seat.Pull out the arm rest when neededand fold back when not required.

These seats can be independentlyfolded as and when required whileentering and getting down from thevehicle for the third row seat

passenger or for carrying extraluggage.

Folding of middle row seats fromoutside the vehicle.

Latches are provided on both seatson outer side for folding the seatbackrest. Operate the seat latchA to fold the seat back on seatbase.

Pull the seat release strap Bprovided on seat base and tilt the

seat base up so that it is verticaland touching front seat.

To unfold the seat, slide the knobC, drop the seat. Operate latch

A to unfold back rest.

1.Head Restraint 2. Foldable Handrest

1

2

REAR SEAT ADJUSTMENT

Getting Start


61/142

Folding of middle row seats frominside the vehicle (from third rowseat).

Operate the seat latch A to fold

the seat back on seat base.Pull the seat release strap Dprovided on seat base rear sideand tilt the seat base up so that itis vertical and touching front seat.

To unfold the seat, slide the knobD, drop the seat. Operate latchA to unfold back rest.

Front facing third row seat (iffitted)

The third row seat is also frontfacing. It can be accessed after

folding one of the middle row seats.Two adjustable neck restraints areprovided on the third row seat.

This seat can be folded and alsocan be removed as and whenrequired for more luggages.

Folding of third row seat

Latch is provided on back rest forfolding the seat backrest. Open thetail gate to access the latch. Pull

the seat latch 1 to drop the seback on seat base.

Lift the handle 2 and tilt the sebase up so that it is vertical antouching middle row seat.

SEAT FOLDING

Getting Started


62/142

60

Hook the straps provided on seatbase rear side into middle row seatneck restraints. This will hold theseat firmly.

Removal of third row seat

Once the seat is folded, it can betaken out from the vehicle. Operatethe levers to release the seat andcare fully takes out seat fromvehicle.

Seat Release Lever

Side Facing seats (if fitted) :

In this there are two options, 7-Seater and 9-seater. In the 7-seateroption, two occupants can beaccommodated and in 9-seateroption, four occupants can beaccommodated in the rear mostpart of the vehicle.

In this version, 60:40 split typemiddle seat is not provided. Acushion bench seat is providedfor the middle passengers.

SEAT BELT

Getting Starte

S B l


63/142

Seat Belts

The safety of the occupants is ofprime importance to us.

This vehicle is equipped with seat

belts as a part of occupantrestraint system.

Why Seat Belts

Wearing seat belts properly canprotect you from being thrownagainst the inside of the vehicle,against other occupants or out ofthe vehicle, in case of an accidentor sudden braking. It will reducethe chances of severe injury.

How to use seat belts

This vehicle has three point inertiareel type front and rear seat beltsin the out board positions and alap belt for middle passenger onrear seat. In normal driving the beltlets you move freely in your seat.

In case of an accident or suddenbraking inertia reel automatically

tightens the belt to help restrainyour body.

The anchor end of the shoulder beltis adjustable to suit the height ofthe passenger wearing it. The lapbelt has one manually adjusted beltthat fits across the hip bone. It issimilar to safety belt used inaeroplanes.

Make sure that your seat isadjusted to a good driving positionand the back of the seat is upright.

1. Pull the tongue across your bodyand insert it into the buckle.

2. Check and ensure that the beis not twisted.

WARNING

Twisted seat belts can cause

injury, in a collision, the full widthof the belt isnt available toabsorb the impact. This putsmore force on the bonesbeneath the belt, which couldbreak them or cause otheserious injury. Dont weatwisted seat belts.

3. Position the lap portion of thbelt as low as possible acroyour hip bone.

4. Pull up the shoulder part of thbelt to remove the slack. Maksure that the belt goes over yocollar bones and across ches

5. To unlatch the belt, press the rebutton on the buckle. Guide th

belt to the pillar as it retracts.

1. Seat Belt 3. Lock Buckle2. Tongue 4. Lap Belt

2

1

3 4

SEAT BELTS

Getting Started

L b l


64/142

62

WARNING

Improper positioning of theshoulder portion of the seat beltis dangerous. An improperlypositioned belt will provide littleor no protection in a collision.Always make sure the shoulderportion of the seat belt ispositioned across your shoulderand near your neck, but neverunder your arm. on your neck,or on your upper arm.

6. Each belt should be used by

one occupant only . The beltmust not be put round a child,seated on passengers lap.

7. When the belt has been in usein a serious accident or showssigns of severe fraying or ofhaving been cut, replace with anapproved belt kit.

8. The belt must not be altered ormodified during use.

WARNING

Using one seat belt for morethan one person at a time isdangerous. A seat belt used Inthis way cant spread the impactforces properly and the twopassengers could be crushedtogether and seriously injured.Never use one belt for morethan one person at a time.

9 The belts are meant (intended)for adult occupants only.

10.The belts if required should be

replaced, by Authorisedpersonnel only.

11.The belt should not bedisassembled. If required,authorised personnel onlyshould carry out disassemblyand assembly.

12 Clean the webbing with a mildsoap solution recommended for

upholstery or bleach or dye thewebbing this may weaken it.

Lap belt

Pull the tongue to the desiredlength.

Insert it into the buckle until you

hear a click.Adjust the belt length. To lengthenthe belt, hoId the tongue at a rightangle to the webbing and pull. Toshorten, pull the loose end of thewebbing.

To unfasten, depress the button inthe buckle.

WARNING

Positioning the lap portion of theSeat Belt too high can bedangerous, in a collision, thiswould concentrate the impactforce directly on the abdominalarea, causing serious injury.Wear the lap portion of the beltsnugly and as low as possible.

SEAT BELT

Getting Start

TATA MOTORS strongly urges Child restraint systems are


65/142

TATA MOTORS strongly urgesthat the driver and passengers inthe vehicle be properly restrainedat all times with the seat-belts.Failure to do so could increase the

chance of injury and / or theseverity of injury in accidents.

Baby or Small Child :

Use child restraint systemappropriate for the child until thechild becomes large enough toproperly wear the vehicles seat-belts.

If a child is too large for a childrestraint system, the child shouldsit in the seat and must berestrained using the vehicles seat-belt.

Also use the seat-belt while thechild is in the rear seat. Accordingto accident statistics, the child issafer when properly restrained in

the rear seat than in the front seat.

Child restraint systems areavailable. TATA MOTORSrecommend the use of a typewhich fits to your vehicle. Beforeinstallation, always read the

manufacturers instructions.Pregnant Woman :

TATA MOTORS recommends theuse of a seat-belt. Doctors adviseis recommended. The lap beltshould be worn securely and aslow as possible over the hips andnot to waist.

Injured person :TATA MOTORS recommends theuse of a seat-belt for injured person.Depending on the injury, consultyour doctor for specificrecommendations.

Driving

SAFETY CHECKS

Before Driving please ensure to Ensure SAFETY CHECKS


66/142

64

Before Driving, please ensure tocheck (Refer maintenance)

1. Tyre pressure and condition oftyres. Inflate recommended tyrepressure if required.

2. Coolant level to Max level.

3. Engine oil level up to Max markon dipstick.

4. Brake fluid level .

5. Water in windshield washerreservoir. Top up if required.

6. Power steering oil level.

7. Battery electrolyte level.

8. Fuel level. Ensure sufficientFuel.

Adjust

1. Check posit ion of seat. I frequired adjust to yourconvenience.

2. Check adjustment of all rearview mirrors.

Ensure

1. Bonnet is fully closed.

2. All doors are properly closed &locked.

3. Check that any items you maybe carrying inside with you arestored properly or fasteneddown securely.

4. Seat belts are fastened

5. Ensure all mirrors, windows andoutside lights are clean andunobstructed. Remove dust,frost, snow or ice if any, on

these.6. All switches & lamps are working

7. Check and ensure that all thegauges and indicators in theinstrument cluster are working.

8. Gear shift lever is in neutralposition

9. Parking brake is released.

10.Adjust steering wheel position.

SAFETY CHECKS

Windshield/wiper/windshieldwasher

Always keep windshield glass cleanto avoid any distraction in visibility.Ensure proper working of wipersand condition of wiper blade.Ensure that windshield washerreservoir is full. Do not operatewiper alone when the windshieldglass is dry, this would damage thewindshield.

Headlights

Keep headlight lenses clean. Checkfor operation of headlamps in bothhigh/low beam condition. Check forcorrect focusing of headlamps. Useonly recommended type of bulbs.Do not use the high beam unless itis inevitable. Its dazzle may glarethe driver of the oncoming car thecondition thus causing an accident.

Drivi

DRIVING SAFET

Side

Tata Sumo Grande New DICOR / TURBO (Revision)

Documents