Tank Diameter Side Shell Length Max. Overall Height 100-PSI 125-PSI 150-PSI Other Non-Code ASME Code Non-Code w/ Hydro Test Standard Epoxy Prep. for Rubber Prep for Vinyl Ester Other Yes No NSF Lining Req'd. Standard Primer Standard Epoxy Urethane Other Tank Size Design Pressure Code Requirements Tank Lining (Interior) Tank Coating (Exterior) Tank Legs & Support Skid Strap Leg Angle Leg Beam Leg Jack Saddles Jack Saddles w/ Stands Pipe Leg Support Clips Internal - Qty. Carbon Stainless Seismic Requirements No Yes Special Requirements Lift Lugs False Bottom Distributor Plate Qty. of Holes Size of Holes Head Shape Flanged & Dished 2:1 Semi-Elliptical FC (Full Coupling) HC (Half Coupling) SP (Spud) BF (Blind Flange) SDPF (Single Drilled Pad Flange) DDPF (Double Drilled Pad Flange) SW (Sight Window) 3" X 12" HH (Hand Hole) FS (Full Spool) - Raised Face Standard HS (Half Spool) - Raised Face Standard WNF (Weld Neck Flange) - Raised Face Standard MW (Manway) Round Manway (Davited) Elliptical Manway Company Contact Phone Quantity Yes No Left Hand / Right Hand Customer Notes 1. STRAP LEGS MAY ONLY BE USED THROUGH Ø 42". WHEN SEISMIC IS REQUIRED, STRUCTURAL LEGS WILL BE USED. 2. FILL IN THE SCHEDULE OF OPENINGS AND MARK THEIR APPROXIMATE LOCATION ON THE DRAWING. 3. ALL REQUIRED SPECIFICATIONS MUST BE PROVIDED AS ATTACHMENTS. 0° 90° 180° 270° PO BOX 338 KENDALLVILLE, IN 46755 PHONE: 800-348-2514 FAX: 800-348-1514 EMAIL: QUOTE @ QUICKTANKS.COM Price (ea) $ Skid/Wrap (ea) $ Weight (ea) Top Head Ship In Weeks After Drawing Approval SHOW LETTER IN APPROPRIATE BOX FOR FITTINGS LISTED IN "SCHEDULE" LOCATION IN HEAD OR SHELL IS IMPORTANT (EXACT POSITION IS NOT) (If Required) Skid - W-Beam Skid - Other (Standard for ASME Code) Installation of Customer Supplied Materials External Piping & Valves Internals Mark Type Size Service A B C D E F G H Service Type If Other Type Ring Base Full Vacuum (Not Tangent-to-Tangent) Differential Pressure CRN (Canadian Registration Number) Province (Include any In-Shop Inspection Visits) Document Package (U-1A is Included with All ASME Tanks) 11" x 15" 12" x 16" * 14" x 18" * 18" x 24" * Standard 16" 24" 18" 30" 20" Must Provide Detailed Prints to be Included in Quote Please save form, attach to email and return to [email protected] All Tanks are Carbon Steel 4 x 6 6 x 8 Raised Face (RF) Flat Face (FF) Raised Face (RF) Flat Face (FF) Raised Face (RF) Flat Face (FF) Schedule of Openings - Please Note "SS" for Stainless Fittings All fittings are Carbon Steel unless noted as Stainless Steel (Standard for Non-Code) American Iron & Steel Act (Federal EPA $) Yes Price shown is for up to 3 Tanks External - Qty. Carbon Stainless Last Revised: 7/30/2019 If Seismic Calculations are required, please complete the Seismic Data Request Form. Click Below to Download Date