-
PETER MOOG & CIE AG, Neufeldstrasse 11, CH-3076 Worb /
SwitzerlandPhone +41 (0)31 838 19 19 - Fax +41 (0)31 838 19 13 -
[email protected] - www.moog.ch
Tank WashersThree-dimensional rotating spray heads:For the most
efficient and economical internal cleaning of all types of
containers.
swiss quality
-
Tank Washers
Application range
Successful worldwide
PETER MOOG & CIE AG, Neufeldstrasse 11, CH-3076 WorbPhone
+41 (0)31 838 19 19 - Fax +41 (0)31 838 19 13 - [email protected]
www.moog.ch
MOOG tank washers stand out in particular through the fol-lowing
advantages:
• Availableinstandardshaftlengths,aswellasinspecial shaft
lengths (from 170 mm upwards, on request)• Topquality,ruggeddesign•
Dependingonthemodel,suitableforaworkingpressure up to 250 bar 3625
psi• Easyhandling,lowmaintenancecosts• Lightweight•
Upgradableandconvertiblewithawiderangeofoptions and accessories
MOOG tank washers are used all over the world
ChemicalindustryPharmaceuticalindustryDyeingindustryIBCandcaskrecycling
WineindustryPlant constructionFoodindustryandmanymore
Three-dimensional rotating spray heads:For the most efficient
and economical internal cleaning of all types of containers.
DryingplantsSpraytowersReactorsContainer cleaning
plantsCentrifugesFermentersSilosFiltersAgitatorsMixing
vesselsVacuum vesselsTruck cleaningFreight car cleaning
Bottling plantsPipelinesIBCCase washing plantsWine barrelsSteel
tanksFurnacesConcrete mixersGrease extractorsBottle
cleaningKegsChemical barrelsandmanymore
MOOGtankwasherscanbeemployedforthecleaning of:
-
Mode of operation and use
PETER MOOG & CIE AG, Neufeldstrasse 11, CH-3076 WorbPhone
+41 (0)31 838 19 19 - Fax +41 (0)31 838 19 13 - [email protected]
www.moog.ch
>
MOOGtankwashersarealsoavailablewithATEXcertification.
MOOGtankwashersworkwithasprayheadthatrotatesinthreedimensions,drivenbyanelectricorcompressedair
motor.
This guarantees the most rational, effective and economic
cleaning of the inside of tanks, silos, IBC, tanks, barrels and
allothertypesofcontainers.
MOOGtankwasherscanbeconnectedtoanycommercially-availablehigh-pressurecleaneroranystationaryhigh-pressurepump.
MOOG tank washers are available in various standard shaft
lengths, as well as in special
lengths.Youwillthereforealwaysbeabletofindtherightinsertionlengthforyourapplication.
Whatever the requirements for cleaning the insides of tanks and
whatever their size,
MOOGhastherightsprayheadavailable.Thesevaryintheirmaximumflowrateandmaximum
working pressure. And where no series products can be used, we can
also offer customized versions.
Through the simultaneous movement in all rotation axes,
a360degreespraypatternisformed,therebythoroughlycleaningeverylocationandeverycornerinsidethetank.
-
TheER/ARandEM/AMmodelsareavailableinvariousconfigura-tions;Forexample,madefromdifferentmaterials,orfittedwithseals
made from various materials. Furthermore there are three
differentsprayheadsizesavailable.
ApplicationsThe models ER/AR and EM/AM are used for all kind of
containers, tanks, barrels etc. Appropriate to operate with
agents.
Mounting positionThemountingpositioncanbechosenfreely.
CIPThe models ER/AR and EM/AM are CIP capable, conform to
FDA*andcapableofbeingintegratedintoautomatedcleaningprocesses.
ConsumptionIn comparison to conventional cleaning processes, the
best possible cleaning result is being achieved with a reduced
consumption of water at the same time.
Operating costsThe short cleaning time and the solid
construction offer low downtime at reduced costs.
Water connection3/8“ as a
standardOptionallyavailablewithdifferentthreads
Mounting flange/clampWiderangeofaccessorymountingsavailable or
custom-designed fabrication
Options3 or 4 nozzles (sprayheadØ55/40mmonly)Solvent-resistant
sealsSealsmadeofEPDMVacuum-resistant**ATEXcertified*
*exclusivelymodelER/AR**exclusivelymodelER/AR
withsprayheadØ55/40mm
MaterialsStainlesssteel316L(model ER/AR)Nickel plated brass
(model EM/AM)Other materials on request
Working pressureMax. 250 bar 3625 psi (model ER/AR) Max. 180 bar
2610 psi (model EM/AM)
Water flow
rateMax.50L/min.13.2gal(sprayheadØ55/40mm)Max.30L/min.7.9gal(sprayheadØ32mm)
DriveElectric motor (model ER/EM)Air motor (model AR/AM)
Nozzles2 nozzles
Shaft length500/700/1000/1500/2000/3000/4000
mm(SprayheadØ32mmlimitedto2000mm)
Optionallyavailableinothershaftlengths
SprayheadØ55mm
SprayheadØ40mm
SprayheadØ32mm(in316Lonly,workingpressure
limited to 180 bar/2610 psi)
Description Spray head
Technical data
Models ER/AR and EM/AM
PETER MOOG & CIE AG, Neufeldstrasse 11, CH-3076 WorbPhone
+41 (0)31 838 19 19 - Fax +41 (0)31 838 19 13 - [email protected]
www.moog.chMOO
G 2
008
- Sub
ject
to te
chni
cal c
hang
es
-
Model ERD/ARD
MaterialStainlesssteel316LOther materials on request
Working pressureMax. 200 bar 2900 psi
Water flow rateMax.80L/min.21.1 gal
DriveElectric motor (modelERD)Air motor (modelARD)
Nozzles4 nozzles
Shaft length500/700/1000/1500/2000/3000/4000
mmOptionallyavailableinothershaftlengths
Doublesprayhead
Description Spray head
Technical data
>
PETER MOOG & CIE AG, Neufeldstrasse 11, CH-3076 WorbPhone
+41 (0)31 838 19 19 - Fax +41 (0)31 838 19 13 - [email protected]
www.moog.ch
TheERD/ARDmodelisespeciallysuitableforlargetanks,duetoitshighwaterthroughput.Twosprayheadsmountedoppositetoeachotherguaranteeaveryfinespraypatternandauniformcleaningresult.
ApplicationsThemodelERD/ARDisusedforalllargecontainers,tanks,silosetc.
Suitable for the suspension on a chain hoist. Appropriate to
operate with agents.
Mounting positionThemountingpositioncanbechosenfreely.
CIPThemodelsERD/ARDisCIPcapable,conformtoFDAandcapable of being
integrated into automated cleaning processes.
ConsumptionIn comparison to conventional cleaning processes, the
best possible cleaning result is being achieved with a reduced
consumption of water at the same time.
Operating costsThe short cleaning time and the solid
construction offer low downtime at reduced costs.
Water connection3/8“ as a
standardOptionallyavailablewithdifferentthreads
Mounting flange/clampWiderangeofaccessorymountingsavailable or
custom-designed fabrication
OptionsSolvent-resistant sealsSealsmadeofEPDMATEXcertified
Also available as model ERD70/ARD70:Working pressure max. 70 bar
1015 psiWaterflowratemax.200L/min.52.8 gal
-
Model ERK/ARK
TheERK/ARKmodelhasbeenspeciallydevelopedforautomatedinsertion
into wine barrels. The spherical shape and compact design
ofthesprayheadmakesitpossibletoinserttheunitevenintothesmallest
openings.
ApplicationsThe model ERK/ARK is used for all wine barrels, as
well as for smaller containers, tanks etc. Appropriate to operate
with agents.
Mounting positionThemountingpositioncanbechosenfreely.
CIPThemodelERK/ARKisCIPcapable,conformtoFDAandcapable of being
integrated into automated cleaning processes.
ConsumptionIn comparison to conventional cleaning processes, the
best possible cleaning result is being achieved with a reduced
consumption of water at the same time.
Operating costsThe short cleaning time and the solid
construction offer low downtime at reduced costs.
Water connection3/8“ as a
standardOptionallyavailablewithdifferentthreads
Mounting flange/clampWiderangeofaccessorymountingsavailable or
custom-designed fabrication
OptionsSolvent-resistant sealsATEXcertifieddevice
MaterialStainlesssteel316LOther materials on request
Working pressureMax. 180 bar 2610 psi
Water flow rateMax.30L/min.7.9 gal
Minimum size of built-in opening38,0 mm 1.49”
DriveElectric motor (model ERK)Air motor (model ARK)
Nozzles2 nozzles
Shaft length500/700/1000/1500/2000
mmOptionallyavailableinothershaftlengths
Round-shapedsprayheadØ37mm
Description Spray head
Technical data
PETER MOOG & CIE AG, Neufeldstrasse 11, CH-3076 WorbPhone
+41 (0)31 838 19 19 - Fax +41 (0)31 838 19 13 - [email protected]
www.moog.chMOO
G 2
008
- Sub
ject
to te
chni
cal c
hang
es
-
Model ERW/ARW
Duetoitsshape,theERW/ARWmodelwiththeangledsprayheadonlycoversanareaof270°tothefront,asaresultthecleaningcanbeaimedataspecificareadependingontheinstallation
situation. In addition, sensitive areas or installation openings
can be excluded from the cleaning.
ApplicationsThe model ERW/ARW is used for all kind of
containers, tanks etc. Appropriate to operate with agents.
Mounting positionThemountingpositioncanbechosenfreely.
CIPThemodelERW/ARWisCIPcapable,conformtoFDAandcapable of being
integrated into automated cleaning processes.
ConsumptionIn comparison to conventional cleaning processes, the
best possible cleaning result is being achieved with a reduced
consumption of water at the same time.
Operating costsThe short cleaning time and the solid
construction offer low downtime at reduced costs.
Water connection3/8“ as a
standardOptionallyavailablewithdifferentthreads
Mounting flange/clampWiderangeofaccessorymountingsavailable or
custom-designed fabrication
OptionsSolvent-resistant sealsSealsmadeofEPDMATEXcertified
MaterialStainlesssteel316LOther materials on request
Working pressureMax. 250 bar 3625 psi
Water flow rateMax.50L/min.13.2 gal
DriveElectric motor (model ERW)Air motor (model ARW)
Nozzles2 nozzles
Shaft length500/700/1000
mmOptionallyavailableinothershaftlengths
Angledsprayhead
Description Spray head
Technical data
>
PETER MOOG & CIE AG, Neufeldstrasse 11, CH-3076 WorbPhone
+41 (0)31 838 19 19 - Fax +41 (0)31 838 19 13 - [email protected]
www.moog.ch
-
Model BASIC 40
TheBASIC40modelofferstheusualhighqualityataveryattracti-veprice.Theconstructionfromstainlesssteelin304qualityallowsformanyapplicationsinthefoodstuffindustrywithoutfurtherrequi-rements.Thismodelisonlyavailablewithanelectricaldriveandashaft
length of 1000 mm.
ApplicationsThe model BASIC 40 is used for all kind of
containers, tanks etc. Appropriate to operate with agents.
Mounting positionThemountingpositioncanbechosenfreely.
CIPThemodelBASIC40isCIPcapable,conformtoFDAandcapable of being
integrated into automated cleaning processes.
ConsumptionIn comparison to conventional cleaning processes, the
best possible cleaning result is being achieved with a reduced
consumption of water at the same time.
Operating costsThe short cleaning time and the solid
construction offer low downtime at reduced costs.
Water connectionM22x1,5 as a
standardOptionallyavailablewithdifferentthreads
Mounting flange/clampWiderangeofaccessorymountingsavailable or
custom-designed fabrication
MaterialStainless steel 304
Working pressureMax. 250 bar 3625 psi
Water flow rateMax.50L/min.13.2 gal
DriveElectric motor
Nozzles2 nozzles
Shaft length1000 mm
SprayheadBASIC40
Description Spray head
Technical data
PETER MOOG & CIE AG, Neufeldstrasse 11, CH-3076 WorbPhone
+41 (0)31 838 19 19 - Fax +41 (0)31 838 19 13 - [email protected]
www.moog.chMOO
G 2
008
- Sub
ject
to te
chni
cal c
hang
es
-
Model ERVC/ARVC
The ERVC/ARVC model excels at extreme conditions. The
comple-telyencapsulatedandsealedteethofthesprayheaddefyanydirt,glue,paintparticlesorsimilarforeignbodies;theunitremainsreadyfor
use at all times.
ApplicationsThe model ERVC/ARVC is used for the cleaning of all
kind of
containers,tanks,silosetc.underdifficultconditions.Appropriate to
operate with agents.
Mounting positionThemountingpositioncanbechosenfreely.
CIPThemodelERVC/ARVCisCIPcapable,conformtoFDAandcapable of being
integrated into automated cleaning processes.
ConsumptionIn comparison to conventional cleaning processes, the
best possible cleaning result is being achieved with a reduced
consumption of water at the same time.
Operating costsThe short cleaning time and the solid
construction offer low downtime at reduced costs.
Water connection3/8“ as a
standardOptionallyavailablewithdifferentthreads
Mounting flange/clampWiderangeofaccessorymountingsavailable or
custom-designed fabrication
Options3 or 4 nozzlesSolvent-resistant
sealsSealsmadeofEPDMATEXcertified
MaterialStainlesssteel316LOther materials on request
Working pressureMax. 250 bar 3625 psi
Water flow rateMax.50L/min.13.2 gal
DriveElectric motor (model ERVC)Air motor (model ARVC)
Nozzles2 nozzles
Shaft length500/700/1000/1500/2000/3000/4000
mmOptionallyavailableinothershaftlengths
Sealedsprayhead
Description Spray head
Technical data
>
PETER MOOG & CIE AG, Neufeldstrasse 11, CH-3076 WorbPhone
+41 (0)31 838 19 19 - Fax +41 (0)31 838 19 13 - [email protected]
www.moog.ch
-
Accessories for Tank Washers
Bunghole mounts
Clamping device / Stand
Add-ons for drive
Custom products on request
Spray head protection
Screwings
Ask for our complete accessories brochure!
Motor protection covers
Screw-in mounts / Counter nuts
Double handle
Suspension bail
MO
OG
200
8 - S
ubje
ct to
tech
nica
l cha
nges
Angular gear Rubber protection cap Stainless steel motor
covers
BungholemountswithDelrinorrubberconeDoublehandleforallmodels(stainlesssteel)
Brassnickelplated Delrinorstainlesssteel
Delrinorstainlesssteelscrew-inmounts screwing barrel screwings and
counter-nuts
Gearing protection Basket guard Suspension bail Water bearing
suspension bail
ClampStandCustomproductssuchasfittingsandflanges available on
request