TANGO - Varley Castors · PDF filetango + thermoelastic rubber tyred wheel with polypropylene centre - plate fixing tango + elastic rubber tyred wheel with nylon centre - plate fixing

H Varley LimitedSpecial Application Castor range

TANGO seriesCatalogue SCT01

1www.varley.co.uk

HEAD OFFICE & WAREHOUSE: 5 CENTURY PARK, PACIFIC ROAD, BROADHEATH, ALTRINCHAM, CHESHIRE, WA14 5BJ t 0161 928 9617 f 0161 928 7824 e [email protected]

SCOTLAND & NORTH EAST: t 01698 732523 f 01698 730947 e [email protected] MIDLANDS & SOUTH: t 01952 462527 f 01952 460176 e [email protected]

CONTENTS

TANGO CASTORS

TANGO AX ANTI-STATIC CASTORS

OTHER PAGES

Introduction 2

MKL GKL Plate fixing 3MK GK Bolt hole fixing 4MKR GKR Bolt fixing 5

MKRAX GKRAX Bolt fixing 8MKAX GKAX Bolt hole fixing 7MKLAX GKLAX Plate fixing 7

Index 8

MKT GKT Expander fixing 6

H Varley Limited

Special Application Castors Range

TANGO series

Specification and product selection

All catalogue dimensions are in millimetres unless otherwise stated.

All catalogue load ratings are in kilogrammes unless otherwise stated.

Load ratings given are based on intermittent use on normal truck and trolley ap-plications. Special conditions may apply under any of the following applications or hazards:

• Uneven floor surface• Ramps, cracks, gullies, door guide rails• Track or turntable use• Power towing or driven wheels or rollers• Any application other than manually propelled truck and trolley use

It may be appropriate to select a castor or wheel with a load capacity much greater than would appear necessary in a given set of circumstances, please ask our technical sales team for assistance in product selection.

Specifications (by dimension, description, illustration or otherwise) may be approxi-mate and liable to change without notice, especially with regard to developments and improvements.

Listing of goods does not necessarily imply that they are ex-stock, nor do we accept any obligation to supply them.

All recommendations are given to the best of our knowledge and ability. No liability is accepted for their application.

Please refer to our Technical Information publication for more details.

H VARLEY has specialised in supplying the UK castor market since 1938, offering our customers the stabil-ity and strength they require. Our success has been

achieved in responding to our cus-tomers’ needs by offering:

Service and SupportA huge range of stock at our Al-trincham warehouse and, at each of our locations, technical field sales representatives supported by knowledgeable and experienced sales office personnel. Our friendly and helpful staff will make sure your requirements are met accu-rately and rapidly with a next day delivery or same day trade counter collection.

Quality and BrandsH Varley takes pride in offer-ing only the best quality branded products from the world’s leading castor and wheel manufacturers - MANNER being no exception - to make certain our customers are consistently supplied with depend-able, quality products to BS EN ISO 9001:2000.

SpecificationWe are continually exploring and developing our product ranges. By working closely with our sup-pliers and analysing market trends and requirements we endeavour to keep our customers informed and at the forefront of new technology and design with new product op-tions available into both new and existing market places.

Market PricesPrice requirements are constantly

monitored and reviewed with our suppliers to ensure our customers are consistently supplied at competitive market prices.

PREFERRED RANGE

PRESSED STEEL CASTORS

FABRICATED STEEL CASTORS

SPECIAL APPLICATION CASTORS

SPECIAL APPLICATION WHEELS

MATERIALS HANDLING

ASSOCIATED PRODUCTS

2HEAD OFFICE & WAREHOUSE: 5 CENTURY PARK, PACIFIC ROAD, BROADHEATH, ALTRINCHAM, CHESHIRE, WA14 5BJ t 0161 928 9617 f 0161 928 7824 e [email protected]

SCOTLAND & NORTH EAST: t 01698 732523 f 01698 730947 e [email protected] MIDLANDS & SOUTH: t 01952 462527 f 01952 460176 e [email protected]

1 Select from plate, bolt hole, bolt fixing (illustrated)

or expanding adaptor for tube. 2 Precision ball-bearing

swivel head with labyrinth seal. Non-corroding, glass fi-

bre reinforced polyamide housing. 3* Brake pedal oper-

ates within swept radius (100mm and 125mm diameter).

4 Total lock of wheel and swivel action. Also available with

directional lock for straight line travel. Ergonomic press to

engage, press to release pedal. 5 Non-

marking tread. 6 Smooth con-

tours and service-free design

make castor easy to clean.

MANNER is a Finnish, family owned company founded in 1890. Today Manner is the leading castor manufacturer in the Nordic countries.

Manner castors are internationally known and recognised as having a proud reputation for quality of design and manufacture.

Their knowledge of plastics and precision en-gineering, combined with progressive product development and awareness of customer re-quirements guarantees the ability to manu-facture high quality, durable castors and wheels.

The TANGO series is a proven castor with outstanding success rehab, medical and catering equipment provid-ing user benefits in performance and visual appearance.

The contemporary design in itself gives a new look and feel to any chosen application, while the curved shapes of the frame increase its load capacity, strength and stability while allowing the castor to be easily cleaned.

The TANGO castor is available with a number of op-tions such as total stop brake, directional lock, anti-stat-ic and stainless variations. Manner also have the ability

and flexibility to tailor castors for equipment manu-facturers’ specific requirements. A larger brake pedal is available to order where an application demands, and ensures safe use while protecting the wheel from dirt.

The standard finish for castor frames is mid-grey (dark grey for anti-static castors) but light grey and black are also available. For larger quantity orders Manner can customise the colour of brake pedals and threadguards

and pedals can even feature your brand logo! Equipment manu-facturers may also benefit from the option of plastic wrap on the wheel tread to protect tyres while in transit.

Large brake pedal is availableto factory order

Please ask fordetails 6

5

43

2

2

1

* Swept radius is calculated as the castor’s swivel offset (as detailed within data tables on the following pages) + wheel radius. The operating pedal on 75mm castors with brake or directional lock increases this figure by 21mm

3www.varley.co.uk

HEAD OFFICE & WAREHOUSE: 5 CENTURY PARK, PACIFIC ROAD, BROADHEATH, ALTRINCHAM, CHESHIRE, WA14 5BJ t 0161 928 9617 f 0161 928 7824 e [email protected]

SCOTLAND & NORTH EAST: t 01698 732523 f 01698 730947 e [email protected] MIDLANDS & SOUTH: t 01952 462527 f 01952 460176 e [email protected]

All dimensions are in mm and all loadings in kg unless otherwise stated

Contemporary designCorrosion resistant polyamide constructionPlate fixingPrecision ball bearing in swivel headLabyrinth seal for protection in wet conditions

TANGO

MKLGKL/GPL

TANGO + THERMOELASTIC RUBBER TYRED WHEEL WITH POLYPROPYLENE CENTRE - PLATE FIXING

TANGO + ELASTIC RUBBER TYRED WHEEL WITH NYLON CENTRE - PLATE FIXING

wheeldiameter

treadwidth

fittedheight

swiveloffset

shoreA

loadcapacty

bearingtype swivel fixed

swivel +total stop brake

swivel +directional lock

75 32 117 35.5 80 70 plain MKL-75 PTE 80 MKL-J-75 PTE 80 MKL-R-75 PTE 80

32 117 35.5 80 70 ball MKL-S-75 PTE/K 80 MKL-J-S-75 PTE/K 80 MKL-R-S-75 PTE/K 80

100 32 148 45 55 70 plain GKL-100 PTE 55 GPL-100 PTE 55 GKL-J-100 PTE 55 GKL-R-100 PTE 55

32 148 45 55 70 ball GKL-S-100 PTE/K 55 GPL-S-100 PTE/K 55 GKL-J-S-100 PTE/K 55 GKL-R-S-100 PTE/K 55

32 148 45 80 100 ball GKL-S-100 PTE/K 80 GPL-S-100 PTE/K 80 GKL-J-S-100 PTE/K 80 GKL-R-S-100 PTE/K 80

32 148 45 90 110 ball GKL-S-100 PTE/K 90 GPL-S-100 PTE/K 90 GKL-J-S-100 PTE/K 90 GKL-R-S-100 PTE/K 90

125 32 168 44.5 55 70 plain GKL-125 PTE 55 GPL-125 PTE 55 GKL-J-125 PTE 55 GKL-R-125 PTE 55

32 168 44.5 55 70 ball GKL-S-125 PTE/K 55 GPL-S-125 PTE/K 55 GKL-J-S-125 PTE/K 55 GKL-R-S-125 PTE/K 55

32 168 44.5 80 100 ball GKL-S-125 PTE/K 80 GPL-S-125 PTE/K 80 GKL-J-S-125 PTE/K 80 GKL-R-S-125 PTE/K 80

32 168 44.5 90 110 ball GKL-S-125 PTE/K 90 GPL-S-125 PTE/K 90 GKL-J-S-125 PTE/K 90 GKL-R-S-125 PTE/K 90

wheeldiameter

treadwidth

fittedheight

swiveloffset

shoreA

loadcapacty

bearingtype swivel fixed

swivel +total stop brake

swivel +total stop brake

100 32 148 45 60 80 ball GKL-S-100 NEK/K GPL-S-100 NEK/K GKL-J-S-100 NEK/K GKL-R-S-100 NEK/K

125 32 168 44.5 60 100 ball GKL-S-125 NEK/K GPL-S-125 NEK/K GKL-J-S-125 NEK/K GKL-R-S-125 NEK/K

77 x 67mm61 x 50mm51 x 42mmM8

95 x 70mm75 x 50mmM10

washer min Ø20mm

tighten max 15Nm

washer min Ø18mm

tighten max 12Nm

77 x 67mm61 x 50mm51 x 42mmM8

95 x 70mm75 x 50mmM10

washer min Ø20mm

tighten max 15Nm

washer min Ø18mm

tighten max 12Nm

ALTERNATIVE TOP PLATE.

Available on all castors.

Add 95X70 to castor reference.

SEALED, STAINLESS STEEL BEARING in swivel head. Includes stainless steel wheel bearing (for ball bearing wheels) and all other metal components in stainless steel.

Available on all 100, 125mm castors with 80 shore A.

Add -IX to castor reference.

Total stop castors: red pedalDirectional lock castors: dark grey pedal

Only ball bearing wheels arefitted with threadguards

4HEAD OFFICE & WAREHOUSE: 5 CENTURY PARK, PACIFIC ROAD, BROADHEATH, ALTRINCHAM, CHESHIRE, WA14 5BJ t 0161 928 9617 f 0161 928 7824 e [email protected]

SCOTLAND & NORTH EAST: t 01698 732523 f 01698 730947 e [email protected] MIDLANDS & SOUTH: t 01952 462527 f 01952 460176 e [email protected]

All dimensions are in mm and all loadings in kg unless otherwise stated

Contemporary designCorrosion resistant polyamide constructionBolt hole fixingPrecision ball bearing in swivel headLabyrinth seal for protection in wet conditions

TANGO

MKGK

TANGO + THERMOELASTIC RUBBER TYRED WHEEL WITH POLYPROPYLENE CENTRE - BOLT HOLE FIXINGwheel

diametertreadwidth

fittedheight

swiveloffset

shoreA

loadcapacty

bearingtype swivel fixed

swivel +total stop brake

swivel +directional lock

75 32 110 35.5 80 70 plain MK-75 PTE 80 MK-J-75 PTE 80

32 110 35.5 80 70 ball MK-S-75 PTE/K 80 MK-J-S-75 PTE/K 80

100 32 141 45 55 70 plain GK-100 PTE 55 GK-J-100 PTE 55

32 141 45 55 70 ball GK-S-100 PTE/K 55 GK-J-S-100 PTE/K 55

32 141 45 80 100 ball GK-S-100 PTE/K 80 GK-J-S-100 PTE/K 80

32 141 45 90 110 ball GK-S-100 PTE/K 90 GK-J-S-100 PTE/K 90

125 32 161 44.5 55 70 plain GK-125 PTE 55 GK-J-125 PTE 55

32 161 44.5 55 70 ball GK-S-125 PTE/K 55 GK-J-S-125 PTE/K 55

32 161 44.5 80 100 ball GK-S-125 PTE/K 80 GK-J-S-125 PTE/K 80

32 161 44.5 90 110 ball GK-S-125 PTE/K 90 GK-J-S-125 PTE/K 90

M10

M12

ALTERNATIVE BOLT HOLE SIZE to suit 12m bolt.

Available on all castors.

When fitting an M12 bolt, access is restricted. It is therefore recommended that the bolt be fitted from above with nut and washer underneath swivel head.

Add -12 to castor reference.

SEALED, STAINLESS STEEL BEARING in swivel head. Includes stainless steel wheel bearing (for ball bearing wheels) and all other metal components in stainless steel.

Available on all 100, 125mm castors with 80 shore A.

Add -IX to castor reference.

wheeldiameter

treadwidth

fittedheight

swiveloffset

shoreA

loadcapacty

bearingtype swivel fixed

swivel +total stop brake

swivel +total stop brake

100 32 141 45 60 80 ball GK-S-100 NEK/K GK-J-S-100 NEK/K

125 32 161 44.5 60 100 ball GK-S-125 NEK/K GK-J-S-125 NEK/K

TANGO + ELASTIC RUBBER TYRED WHEEL WITH NYLON CENTRE - BOLT HOLE FIXING

Only ball bearing wheelsare fitted with threadguards

5www.varley.co.uk

HEAD OFFICE & WAREHOUSE: 5 CENTURY PARK, PACIFIC ROAD, BROADHEATH, ALTRINCHAM, CHESHIRE, WA14 5BJ t 0161 928 9617 f 0161 928 7824 e [email protected]

SCOTLAND & NORTH EAST: t 01698 732523 f 01698 730947 e [email protected] MIDLANDS & SOUTH: t 01952 462527 f 01952 460176 e [email protected]

All dimensions are in mm and all loadings in kg unless otherwise stated

Contemporary designCorrosion resistant polyamide constructionBolt fixingPrecision ball bearing in swivel headLabyrinth seal for protection in wet conditions

TANGO

MKRGKR/GPR

TANGO + THERMOELASTIC RUBBER TYRED WHEEL WITH POLYPROPYLENE CENTRE - BOLT FIXINGwheel

diametertreadwidth

fittedheight

swiveloffset

shoreA

loadcapacty

bearingtype swivel fixed

swivel +total stop brake

swivel +directional lock

75 32 110 35.5 80 70 plain MKR-75 PTE 80 MKR-J-75 PTE 80 MKR-R-75 PTE 80

32 110 35.5 80 70 ball MKR-S-75 PTE/K 80 MKR-J-S-75 PTE/K 80 MKR-R-S-75 PTE/K 80

100 32 141 45 55 70 plain GKR-100 PTE 55 GPR-100 PTE 55 GKR-J-100 PTE 55 GKR-R-100 PTE 55

32 141 45 55 70 ball GKR-S-100 PTE/K 55 GPR-S-100 PTE/K 55 GKR-J-S-100 PTE/K 55 GKR-R-S-100 PTE/K 55

32 141 45 80 100 ball GKR-S-100 PTE/K 80 GPR-S-100 PTE/K 80 GKR-J-S-100 PTE/K 80 GKR-R-S-100 PTE/K 80

32 141 45 90 110 ball GKR-S-100 PTE/K 90 GPR-S-100 PTE/K 90 GKR-J-S-100 PTE/K 90 GKR-R-S-100 PTE/K 90

125 32 161 44.5 55 70 plain GKR-125 PTE 55 GPR-125 PTE 55 GKR-J-125 PTE 55 GKR-R-125 PTE 55

32 161 44.5 55 70 ball GKR-S-125 PTE/K 55 GPR-S-125 PTE/K 55 GKR-J-S-125 PTE/K 55 GKR-R-S-125 PTE/K 55

32 161 44.5 80 100 ball GKR-S-125 PTE/K 80 GPR-S-125 PTE/K 80 GKR-J-S-125 PTE/K 80 GKR-R-S-125 PTE/K 80

32 161 44.5 90 110 ball GKR-S-125 PTE/K 90 GPR-S-125 PTE/K 90 GKR-J-S-125 PTE/K 90 GKR-R-S-125 PTE/K 90

M10 x 16mm17mm A/Ftighten 20-30Nm

M12 x 16mm19mm A/Ftighten 20-30Nm

M10 x 16mm17mm A/Ftighten 20-30Nm

M12 x 16mm19mm A/Ftighten 20-30Nm

ALTERNATIVE BOLT SIZE. M12 x 16mm, 19mm A/F.

Only available on swivel castors.

Add M12 to castor reference.

SEALED, STAINLESS STEEL BEARING in swivel head. Includes stainless steel wheel bearing (for ball bearing wheels) and all other metal components in stainless steel.

Available on all 100, 125mm castors with 80 shore A.

Add -IX to castor reference.

wheeldiameter

treadwidth

fittedheight

swiveloffset

shoreA

loadcapacty

bearingtype swivel fixed

swivel +total stop brake

swivel +total stop brake

100 32 141 45 60 80 ball GKR-S-100 NEK/K GPR-S-100 NEK/K GKR-J-S-100 NEK/K GKR-R-S-100 NEK/K

125 32 161 44.5 60 100 ball GKR-S-125 NEK/K GPR-S-125 NEK/K GKR-J-S-125 NEK/K GKR-R-S-125 NEK/K

TANGO + ELASTIC RUBBER TYRED WHEEL WITH NYLON CENTRE - BOLT FIXING

Total stop castors: red pedalDirectional lock castors: dark grey pedal

Only ball bearing wheelsare fitted with threadguards

6HEAD OFFICE & WAREHOUSE: 5 CENTURY PARK, PACIFIC ROAD, BROADHEATH, ALTRINCHAM, CHESHIRE, WA14 5BJ t 0161 928 9617 f 0161 928 7824 e [email protected]

SCOTLAND & NORTH EAST: t 01698 732523 f 01698 730947 e [email protected] MIDLANDS & SOUTH: t 01952 462527 f 01952 460176 e [email protected]

All dimensions are in mm and all loadings in kg unless otherwise stated

Contemporary designCorrosion resistant polyamide constructionExpander fixingPrecision ball bearing in swivel headLabyrinth seal for protection in wet conditions

TANGO

MKTGKT

TANGO + THERMOELASTIC RUBBER TYRED WHEEL WITH POLYPROPYLENE CENTRE - EXPANDER FIXINGwheel

diametertreadwidth

fittedheight

swiveloffset

shoreA

loadcapacty

bearingtype swivel fixed

swivel +total stop brake

swivel +directional lock

75 32 110 35.5 80 70 plain MKT-75 PTE 80 MKT-J-75 PTE 80

32 110 35.5 80 70 ball MKT-S-75 PTE/K 80 MKT-J-S-75 PTE/K 80

100 32 141 45 55 70 plain GKT-100 PTE 55 GKT-J-100 PTE 55

32 141 45 55 70 ball GKT-S-100 PTE/K 55 GKT-J-S-100 PTE/K 55

32 141 45 80 100 ball GKT-S-100 PTE/K 80 GKT-J-S-100 PTE/K 80

32 141 45 90 110 ball GKT-S-100 PTE/K 90 GKT-J-S-100 PTE/K 90

125 32 161 44.5 55 70 plain GKT-125 PTE 55 GKT-J-125 PTE 55

32 161 44.5 55 70 ball GKT-S-125 PTE/K 55 GKT-J-S-125 PTE/K 55

32 161 44.5 80 100 ball GKT-S-125 PTE/K 80 GKT-J-S-125 PTE/K 80

32 161 44.5 90 110 ball GKT-S-125 PTE/K 90 GKT-J-S-125 PTE/K 90

17mm A/Ftighten 20-30Nm

SEALED, STAINLESS STEEL BEARING in swivel head. Includes stainless steel wheel bearing (for ball bearing wheels) and all other metal components in stainless steel except for expander bolt and nut.

Available on all 100, 125mm castors with 80 shore A.

Add -IX to castor reference.

wheeldiameter

treadwidth

fittedheight

swiveloffset

shoreA

loadcapacty

bearingtype swivel fixed

swivel +total stop brake

swivel +total stop brake

100 32 141 45 60 80 ball GKT-S-100 NEK/K GKT-J-S-100 NEK/K

125 32 161 44.5 60 100 ball GKT-S-125 NEK/K GKT-J-S-125 NEK/K

TANGO + ELASTIC RUBBER TYRED WHEEL WITH NYLON CENTRE - EXPANDER FIXING

internal sizeof tube round square

17 GKT-17X17

18 GKT-18

22 GKT-22 GKT-22X22

25 GKT-25

27 GKT-27X27

28 GKT-28

37 GKT-37 GKT-37X37

Expander sizes. Add to castor reference

Only ball bearing wheelsare fitted with threadguards

7www.varley.co.uk

HEAD OFFICE & WAREHOUSE: 5 CENTURY PARK, PACIFIC ROAD, BROADHEATH, ALTRINCHAM, CHESHIRE, WA14 5BJ t 0161 928 9617 f 0161 928 7824 e [email protected]

SCOTLAND & NORTH EAST: t 01698 732523 f 01698 730947 e [email protected] MIDLANDS & SOUTH: t 01952 462527 f 01952 460176 e [email protected]

Anti-static / conductive / ESD. Resistivity < 10kΩ Contemporary designCorrosion resistant polyamide constructionPlate, bolt hole or bolt fixingPrecision ball bearing in swivel headLabyrinth seal for protection in wet conditions

TANGO AX

MK AX GK AX

TANGO + ANTI-STATIC THERMOELASTIC RUBBER TYRED WHEEL WITH POLYPROPYLENE CENTRE - PLATE FIXING

TANGO + ANTI-STATIC THERMOELASTIC RUBBER TYRED WHEEL WITH POLYPROPYLENE CENTRE - BOLT HOLE FIXING

wheeldiameter

treadwidth

fittedheight

swiveloffset

shoreA

loadcapacty

bearingtype swivel fixed

swivel +total stop brake

swivel +directional lock

75 32 117 35.5 86 70 ball MKL-S-75 PTE/K AX MKL-JY-S-75 PTE/K AX MKL-R-S-75 PTE/K AX

100 32 148 45 86 100 ball GKL-S-100 PTE/K AX GKL-JY-S-100 PTE/K AX GKL-R-S-100 PTE/K AX

125 32 168 44.5 86 100 ball GKL-S-125 PTE/K AX GKL-JY-S-125 PTE/K AX GKL-R-S-125 PTE/K AX

wheeldiameter

treadwidth

fittedheight

swiveloffset

shoreA

loadcapacty

bearingtype swivel fixed

swivel +total stop brake

swivel +directional lock

75 32 110 35.5 86 70 ball MK-S-75 PTE/K AX MK-JY-S-75 PTE/K AX

100 32 141 45 86 100 ball GK-S-100 PTE/K AX GK-JY-S-100 PTE/K AX

125 32 161 44.5 86 100 ball GK-S-125 PTE/K AX GK-JY-S-125 PTE/K AX

77 x 67mm61 x 50mm51 x 42mmM8

95 x 70mm75 x 50mmM10

washer min Ø20mm

tighten max 15Nm

washer min Ø18mm

tighten max 12Nm

M10

Total stop castors: yellow pedalDirectional lock castors: dark grey pedal

Total stop castors: yellow pedalDirectional lock castors: dark grey pedal

77 x 67mm61 x 50mm51 x 42mmM8

95 x 70mm75 x 50mmM10

washer min Ø20mm

tighten max 15Nm

washer min Ø18mm

tighten max 12Nm

ALTERNATIVE TOP PLATE.

Available on all castors.

Add 95X70 to castor reference.

M12

ALTERNATIVE BOLT HOLE SIZE to suit 12m bolt.

Available on all castors.

Add -12 to castor reference.

8HEAD OFFICE & WAREHOUSE: 5 CENTURY PARK, PACIFIC ROAD, BROADHEATH, ALTRINCHAM, CHESHIRE, WA14 5BJ t 0161 928 9617 f 0161 928 7824 e [email protected]

SCOTLAND & NORTH EAST: t 01698 732523 f 01698 730947 e [email protected] MIDLANDS & SOUTH: t 01952 462527 f 01952 460176 e [email protected]

TANGO AX

MK AX GK AX

Anti-static / conductive / ESD. Resistivity < 10kΩ Contemporary designCorrosion resistant polyamide constructionPlate, bolt hole or bolt fixingPrecision ball bearing in swivel headLabyrinth seal for protection in wet conditions

All dimensions are in mm and all loadings in kg unless otherwise stated

INDEXGK-100 PTE 55 4GK-125 PTE 55 4GK-J-100 PTE 55 4GK-J-125 PTE 55 4GK-J-S-100 NEK/K 4GK-J-S-100 PTE/K 55 4GK-J-S-100 PTE/K 80 4GK-J-S-100 PTE/K 90 4GK-J-S-125 NEK/K 4GK-J-S-125 PTE/K 55 4GK-J-S-125 PTE/K 80 4GK-J-S-125 PTE/K 90 4GK-JY-S-100 PTE/K AX 7GK-JY-S-125 PTE/K AX 7GKL-100 PTE 55 3GKL-125 PTE 55 3GKL-J-100 PTE 55 3GKL-J-125 PTE 55 3GKL-J-S-100 NEK/K 3GKL-J-S-100 PTE/K 55 3GKL-J-S-100 PTE/K 80 3GKL-J-S-100 PTE/K 90 3GKL-J-S-125 NEK/K 3GKL-J-S-125 PTE/K 55 3GKL-J-S-125 PTE/K 80 3GKL-J-S-125 PTE/K 90 3GKL-JY-S-100 PTE/K AX 7GKL-JY-S-125 PTE/K AX 7GKL-R-100 PTE 55 3GKL-R-125 PTE 55 3GKL-R-S-100 NEK/K 3GKL-R-S-100 PTE/K 55 3GKL-R-S-100 PTE/K 80 3GKL-R-S-100 PTE/K 90 3GKL-R-S-100 PTE/K AX 7

GKL-R-S-125 NEK/K 3GKL-R-S-125 PTE/K 55 3GKL-R-S-125 PTE/K 80 3GKL-R-S-125 PTE/K 90 3GKL-R-S-125 PTE/K AX 7GKL-S-100 NEK/K 3GKL-S-100 PTE/K 55 3GKL-S-100 PTE/K 80 3GKL-S-100 PTE/K 90 3GKL-S-100 PTE/K AX 7GKL-S-125 NEK/K 3GKL-S-125 PTE/K 55 3GKL-S-125 PTE/K 80 3GKL-S-125 PTE/K 90 3GKL-S-125 PTE/K AX 7GKR-100 PTE 55 5GKR-125 PTE 55 5GKR-J-100 PTE 55 5GKR-J-125 PTE 55 5GKR-J-S-100 NEK/K 5GKR-J-S-100 PTE/K 55 5GKR-J-S-100 PTE/K 80 5GKR-J-S-100 PTE/K 90 5GKR-J-S-125 NEK/K 5GKR-J-S-125 PTE/K 55 5GKR-J-S-125 PTE/K 80 5GKR-J-S-125 PTE/K 90 5GKR-JY-S-100 PTE/K AX 8GKR-JY-S-125 PTE/K AX 8GKR-R-100 PTE 55 5GKR-R-125 PTE 55 5GKR-R-S-100 NEK/K 5GKR-R-S-100 PTE/K 55 5GKR-R-S-100 PTE/K 80 5GKR-R-S-100 PTE/K 90 5

GKR-R-S-100 PTE/K AX 8GKR-R-S-125 NEK/K 5GKR-R-S-125 PTE/K 55 5GKR-R-S-125 PTE/K 80 5GKR-R-S-125 PTE/K 90 5GKR-R-S-125 PTE/K AX 8GKR-S-100 NEK/K 5GKR-S-100 PTE/K 55 5GKR-S-100 PTE/K 80 5GKR-S-100 PTE/K 90 5GKR-S-100 PTE/K AX 8GKR-S-125 NEK/K 5GKR-S-125 PTE/K 55 5GKR-S-125 PTE/K 80 5GKR-S-125 PTE/K 90 5GKR-S-125 PTE/K AX 8GK-S-100 NEK/K 4GK-S-100 PTE/K 55 4GK-S-100 PTE/K 80 4GK-S-100 PTE/K 90 4GK-S-100 PTE/K AX 7GK-S-125 NEK/K 4GK-S-125 PTE/K 55 4GK-S-125 PTE/K 80 4GK-S-125 PTE/K 90 4GK-S-125 PTE/K AX 7GKT-100 PTE 55 6GKT-125 PTE 55 6GKT-17X17 6GKT-18 6GKT-22 6GKT-22X22 6GKT-25 6GKT-27X27 6GKT-28 6

GKT-37 6GKT-37X37 6GKT-J-100 PTE 55 6GKT-J-125 PTE 55 6GKT-J-S-100 NEK/K 6GKT-J-S-100 PTE/K 55 6GKT-J-S-100 PTE/K 80 6GKT-J-S-100 PTE/K 90 6GKT-J-S-125 NEK/K 6GKT-J-S-125 PTE/K 55 6GKT-J-S-125 PTE/K 80 6GKT-J-S-125 PTE/K 90 6GKT-S-100 NEK/K 6GKT-S-100 PTE/K 55 6GKT-S-100 PTE/K 80 6GKT-S-100 PTE/K 90 6GKT-S-125 NEK/K 6GKT-S-125 PTE/K 55 6GKT-S-125 PTE/K 80 6GKT-S-125 PTE/K 90 6GPL-100 PTE 55 3GPL-125 PTE 55 3GPL-S-100 NEK/K 3GPL-S-100 PTE/K 55 3GPL-S-100 PTE/K 80 3GPL-S-100 PTE/K 90 3GPL-S-125 NEK/K 3GPL-S-125 PTE/K 55 3GPL-S-125 PTE/K 80 3GPL-S-125 PTE/K 90 3GPR-100 PTE 55 5GPR-125 PTE 55 5GPR-S-100 NEK/K 5GPR-S-100 PTE/K 55 5GPR-S-100 PTE/K 80 5

GPR-S-100 PTE/K 90 5GPR-S-125 NEK/K 5GPR-S-125 PTE/K 55 5GPR-S-125 PTE/K 80 5GPR-S-125 PTE/K 90 5MK-75 PTE 80 4MK-J-75 PTE 80 4MK-J-S-75 PTE/K 80 4MK-JY-S-75 PTE/K AX 7MKL-75 PTE 80 3MKL-J-75 PTE 80 3MKL-J-S-75 PTE/K 80 3MKL-JY-S-75 PTE/K AX 7MKL-R-75 PTE 80 3MKL-R-S-75 PTE/K 80 3MKL-R-S-75 PTE/K AX 7MKL-S-75 PTE/K 80 3MKL-S-75 PTE/K AX 7MKR-75 PTE 80 5MKR-J-75 PTE 80 5MKR-J-S-75 PTE/K 80 5MKR-JY-S-75 PTE/K AX 8MKR-R-75 PTE 80 5MKR-R-S-75 PTE/K 80 5MKR-R-S-75 PTE/K AX 8MKR-S-75 PTE/K 80 5MKR-S-75 PTE/K AX 8MK-S-75 PTE/K 80 4MK-S-75 PTE/K AX 7MKT-75 PTE 80 6MKT-J-75 PTE 80 6MKT-J-S-75 PTE/K 80 6MKT-S-75 PTE/K 80 6

TANGO + ANTI-STATIC THERMOELASTIC RUBBER TYRED WHEEL WITH POLYPROPYLENE CENTRE - THREAD FIXING

wheeldiameter

treadwidth

fittedheight

swiveloffset

shoreA

loadcapacty

bearingtype swivel fixed

swivel +total stop brake

swivel +directional lock

75 32 110 35.5 86 70 ball MKR-S-75 PTE/K AX MKR-JY-S-75 PTE/K AX MKR-R-S-75 PTE/K AX

100 32 141 45 86 100 ball GKR-S-100 PTE/K AX GKR-JY-S-100 PTE/K AX GKR-R-S-100 PTE/K AX

125 32 161 44.5 86 100 ball GKR-S-125 PTE/K AX GKR-JY-S-125 PTE/K AX GKR-R-S-125 PTE/K AX

M10 x 16mm17mm A/Ftighten 20-30Nm

M12 x 16mm19mm A/Ftighten 20-30Nm

Total stop castors: yellow pedalDirectional lock castors: dark grey pedal

M10 x 16mm17mm A/Ftighten 20-30Nm

M12 x 16mm19mm A/Ftighten 20-30Nm

ALTERNATIVE BOLT SIZE. M12 x 16mm, 19mm A/F.

Only available on swivel castors.

Add M12 to castor reference.

H Varley LimitedSpecial Application Castor range

TANGO seriesCatalogue SCT01 Cert. No. Q10773

Head Office and Warehouse

Scotland and the North East

Midlands and the South

Unit 5 Century ParkPacific Road Broadheath

Altrincham CheshireWA14 5BJ

0161 928 9617 0161 928 7824 [email protected]

01698 732523 01698 730947 [email protected]

01952 462527 01952 460176 [email protected]

www.varley.co.uk

STOCKPORTM60 M56

MANCHESTERM60 M62

CHESTERM6 M56

GEO RICHARDS WAY

ATLANTIC ST

RETAIL PARK

CANAL

A56

M

ANCH

ESTE

R RD

CRESTACOURTHOTEL

B&Q

HALFORDS

Access from Northto Atlantic St viaGeo Richards Way

BROADHEATH

A560

PACI

FIC

RD

t

t

t

e

e

e

f

f

f

w