TALAT Lecture 4105 Combination of Joining Methods 16 pages, 19 figures Basic Level prepared by Lothar Budde, Universität-Gesamthochschule Paderborn Objectives: − to describe the combination of mechanical joining with adhesive bonding with respect to application criteria, productions considerations and resultant properties Prerequisites: − General mechanical engineering background − TALAT lectures 4101 - 4104 Date of Issue: 1994 EAA - European Aluminium Association
16
Embed
TALAT Lecture 4105: Combination of Joining Methods
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
TALAT Lecture 4105
Combination of Joining Methods
16 pages, 19 figures
Basic Level
prepared by Lothar Budde, Universität-Gesamthochschule Paderborn
Objectives: − to describe the combination of mechanical joining with adhesive bonding with
respect to application criteria, productions considerations and resultant properties Prerequisites: − General mechanical engineering background − TALAT lectures 4101 - 4104 Date of Issue: 1994 EAA - European Aluminium Association
TALAT 4105 2
4105 Combination of Joining Methods
Table of Contents
4105 Combination of Joining Methods ..............................................................2 4105.01 Application Criteria.................................................................................. 3
Comparison of Functional Characteristics of Different Fastening Technologies ....3 Classification Index of Joints...................................................................................4 Advantages of Combined Joint Types .....................................................................4 Properties of Elementary Joints ...............................................................................5 Main Advantages and Disadvantages of Adhesive Joining .....................................5 Fold-Adhesive Joints ...............................................................................................6 Examples of Combined Joints Used in the Aircraft Industry ..................................6 Combination of Material Locking and Form Locking Joints...................................7 Fractured Surfaces of Combined Joints after Shear Testing....................................8
4105.02 Production Considerations...................................................................... 8 Production of Combined Joints................................................................................8 Production Variants for Combined Joints................................................................9 Technical Operations in the Production of an Adhesive-Clinch Joint Combination...............................................................................................................................10 Methods of Producing Adhesively Joint and Clinched Fastenings........................10 Form of Clinched Joints With and Without Adhesives .........................................11
4105.03 Properties of Combination Joints.......................................................... 12 Criteria for the Use of Combined Joining Technologies .......................................12 Results of Fatigue Tests with Adhesive Joints ......................................................13 Impact Strength of Different Joints........................................................................13 Shear Strength of Different Joints With and Without Ageing...............................14 Comparison of Properties of Different Joining Technologies ...............................15
4105.04 Literature/References ............................................................................ 15 4105.05 List of Figures............................................................................................ 16
TALAT 4105 3
4105.01 Application Criteria • Comparison of functional characteristics of different fastening
technologies • Classification index of joints • Advantages of combined joint types • Properties of elementary joints • Main advantages and disadvantages of adhesive joining • Fold-adhesive joints • Examples of combined joints used in the aircraft industry • Combination of material locking and form locking joints • Fractured surfaces of combined joints after shear testing
Comparison of Functional Characteristics of Different Fastening Technologies The functional characteristics of the different fastening technologies is important, since this enables us to choose the most appropriate joining technology for light constructions which are being developed and used increasingly. A large number of the so-called "classical" fastening technologies currently in use fulfil these requirements only partly, making it necessary to use solutions which are a compromise (Figure 4105.01.01).
Classification Index of Joints The joining technology used in light constructions should be such that the classification index of the joint, a value for the functional characteristics relative to the corresponding base material of the corresponding material combination, optimally approaches the limiting value of 1 (Figure 4105.01.02).At increased stresses, the principles of force actions, the reduction of disadvantageous notch effects, the constancy of the material properties and the joint reliability become increasingly important. A consequence of the above mentioned is that there is an increasing tendency to use aluminium for highly stressed constructions.
Classification Index of Joints 4105.01.02
Increasing Stress Levels
Source: Wittke, Füssel
Functional Properties of the Joint
Functional Properties of the Base Material
1
Training in Aluminium Application Technologies
alu
Advantages of Combined Joint Types A combination of joint types can be used, among others, to take advantage of the specific material properties of aluminium, thus making it possible to optimise the joint quality, allow certain materials and material combinations to be joint and/or to simplify the fastening process. A combination of different joint types can be used either to improve the statical and dynamical properties of the joint or to guarantee leakproof joints (Figure 4105.01.03).
alu
Training in Aluminium Application Technologies
Combined Joints
Improving the Static and Dynamic Properties of Joints!
Guaranteeing the Joint Gas and Fluid Tightness!
Advantages of Combined Joint Types 4105.01.03
TALAT 4105 5
Properties of Elementary Joints Depending on the load carrying capacity and the design of the light construction, the types of joints used may be of the material locking kind or of the force or shape locking type (Figure 4105.01.04). The choice of the elementary joints to be used in combination is based on the principle of elimination. According to this principle, those particular combinations of joints which do not fulfil any one out of a required list of criteria, are eliminated.
Main Advantages and Disadvantages of Adhesive Joining Adhesive joining plays an important role in the design of ultralight constructions. The main advantages of adhesive joints are the transmission of forces over large areas and the possibility of joining different and non-metallic materials as well as material combinations. The disadvantage of adhesive joining is the fact that, as a rule, the components have to be held rigidly in a fixture during the hardening process. In addition to this, adhesive joints have a limited high-temperature strength (Figure 4105.01.05).
Main Advantages and Disadvantages of Adhesive Joining 4105.01.05
One-Sided Overlapped Adhesive Joints
Advantages: Disadvantages:
Source: Budde
Training in Aluminium Application Technologies
alu
- Force Transmission overLarge Areas
- No Thermal Influence of Material Microstructure- Suitable for Different Types of Materials and for Non-Metals
- Sensitive to Peeling Forces
- Aging Problems
- Limited Warm Strength
The specific disadvantages of adhesive joining can be compensated for by using a
TALAT 4105 6
combination of this material locking joint type with force and shape locking types of joints. Examples of such combined joints can be found in the automotive (mass production) and aircraft (small series production) industries.
Fold-Adhesive Joints In the automotive industry, the combination of adhesive joining and folding can be used for fastening car-body parts. If applied properly, the folded and adhesively joint parts possess the combined advantages of both fastening technologies (Figure 4105.01.06). The main advantage of folded joints is that these can be loaded immediately, i.e., a rational production is possible. The surfaces of the folded joints produced remain smooth and clean. The additional use of adhesives in the fold leads to leakproof joints. At the same time, the adhesive used improves the damping characteristics of the whole aluminium construction.
Training in Aluminium Application Technologies
alu Fold-Adhesive Joints 4105.01.06
Interior Part
Exterior Part
Adhesive Joint
Folding Joint
Function: Strength
Function: Sealing
Aluminium Sheet
Folding and Adhesive Joining in Body Building
Soucre: Hoesch Company Document
Examples of Combined Joints Used in the Aircraft Industry Some adhesive and sealed joints are prone to a deleterious ageing, especially if exposed to industrial atmosphere, water, solvents or aggressive chemicals. Examples of combined adhesive and sealed joints used in aircraft construction illustrate how this deleterious effect can be reduced by the judicious choice of adhesive and sealant, the long-time testing of the joints, a specific design as well as the application of protective layers on the surface of the adhesive and sealed joints (Figure 4105.01.07).
TALAT 4105 7
AdhesiveSealant Coating
Sealant
Adhesive
Combination Joints Used in the Aircraft Industry
Adhesively Fastened Longitudinal Stiffener
Reinforced Rivet-Adhesive Joint
Sealed Riveted Joints
4105.01.07
Source: Endlich
AdhesiveSurface Sealant
Sealant Coating
Training in Aluminium Application Technologies
alu
Combination of Material Locking and Form Locking Joints Joints, consisting of a combination of both adhesive joining and locally active fastening methods, mostly use spot welding or mechanical joining methods like riveting and clinching. In the automotive industry, spot welding is used mainly to shorten production times in spite of the long hardening times of the adhesives. The combination of adhesive and riveted joints is used primarily in the aircraft industry for parts subject to dynamic loading (Figure 4105.01.08). Clinching with or without local incisions is an interesting technology which could be used for combined joints and shall, therefore, be illustrated for combinations with adhesive joining. The following remarks generally apply also to other mechanical fastenings.
alu
Training in Aluminium Application Technologies
Combination of Material Locking and Form Locking Joints 4105.01.08
Adhesive Joining(Material Locking)
+ Spot Welding(Material Locking)
+ Conventional Riveting (Quasi Form Locking)
+ Clinching(Quasi Form Locking)
Source: Budde
TALAT 4105 8
Fractured Surfaces of Combined Joints after Shear Testing During the clinching process, aluminium shaped sheet components and profiles are joint together according to the quasi form locking principle simply through the action of local plastic material deformation without using auxiliary parts or thermally influencing the microstructure. Material spray, which occurs as a joint defect due to the high material pressure in the spot welded region, thereby reducing the joint strength, is absent in joint combinations of clinching and adhesive joining (Figure 4105.01.09).
alu
Training in Aluminium Application Technologies
Spot Welding andAdhesive Joining
Clinching andAdhesive Joining
Source: Budde
Fractured Surface of Combined Joints after Shear Testing
35 mm
4105.01.09
4105.02 Production Considerations
• Production of combined joints • Production variants for combined joints • Technical operations in the production of an adhesive-clinch joint
combination • Methods of producing adhesively joint and clinched fastenings • Form of clinched joints with and without adhesives
Production of Combined Joints Joint combinations consisting of more than one elementary joint can be fabricated by producing the individual joints either simultaneously or one after the other (see Figure 4105.02.01). This chronological order can influence the properties of the joint.
TALAT 4105 9
Production of Combined Joints
No. ofProcesses
ChronologicalOrder of Process
Moment ofReaching theRequiredProperties
4105.02.01Training in Aluminium Application Technologies
alu
Source: Füssel
During Use
One Process
Simultaneously Consecutively
Prior to Use
During Use
Prior to Use
During Use
Multiple Processes
FabricatingCombined Joints
Prior to Use
Production Variants for Combined Joints In principle, three variants are possible for the consecutive production of adhesive joining and mechanical joining (see Figure 4105.02.02).
Training in Aluminium Application Technologies
alu 4105.02.02Production Variants for Combined Joints
Variant 1
1. apply adhesive2. place parts together3. mechanical joining4. curing adhesive
Variant 2
1. place parts together2. mechanical joining3. apply adhesive4. curing adhesive
Variant 3
1. apply adhesive2. place parts together3. curing adhesive4. mechanical joining
Source: Stepanski
(1.)
(2.)
(4.)=RT..200°C (3.)
"Capillary Method"
(1.) (2.)
(3.)
(4.)=RT..200°
(3.)=RT..200°
(1.) (2.)
(4.)
In the so-called "capillary" method, a mechanical joint is first prepared and then an adhesive of low viscosity is brought into the joint crevice. In this variation - which is characterised by a clear separation of the parts to be joint - the adhesive serves generally as a sealant and/or as an inhibitor for corrosion. The adhesive joining of sheet and profile parts followed by a mechanical fastening process, the latter being used to improve the peeling strength of the joint, has till now played only a secondary role. Another fastening process has been found to be industrially most suitable for making combined joints, especially for mass production. In this process, the adhesive is first
TALAT 4105 10
applied to the parts and then, before the adhesive hardens, followed by a mechanical joining process which goes through the unhardened adhesive. The hardening then follows as usual, depending on the type of adhesive used.
Technical Operations in the Production of an Adhesive-Clinch Joint Combination A closer look at the individual process steps involved in the production of the combined adhesive-clinch joint shows that the combined adhesive-mechanical joining process can be easily integrated in the mass production of thin sheet constructions (Figure 4105.02.03).
alu
Training in Aluminium Application Technologies4105.02.03
Operations in the Productionof an Adhesive-Clinch Joint Combination
Source: Budde
Raw Parts SurfaceElement
AdhesiveApplication
Finished PartHandle
Fix
Join
Setting
Methods of Producing Adhesively Joint and Clinched Fastenings The advantage of using clinching instead of spot welding in combination with adhesive joining is that the former allows the use of not only fluid and pasty adhesives but also of adhesive foils and bands (Figure 4105.02.04). Solid adhesives have special advantages, both as far as process technology as well as health aspects are concerned.
TALAT 4105 11
Source: Budde
4105.02.04Training in Aluminium Application Technologies
alu
Clinching Without LocalIncision
With LocalIncision
Fluid Pasty SolidAdhesive
Clinching and Adhesive Joining
Combined With
Methods of Producing Adhesively Joint andClinched Fastenings
Form of Clinched Joints With and Without Adhesives Clinching without local incision can be used as the mechanical fastening partner for adhesive joining using pasty adhesives. On the other hand, clinching with local incision is used together with adhesive foils and bands. The geometry of the joint element of combined clinched fastenings illustrates that in spite of the presence of adhesives, an optimal form of the clinch joint is created, assuming of course that an appropriate process technology is applied (Figure 4105.02.05).
Training in Aluminium Application Technologies
alu Form of Clinched Joints with and without Adhesives 4105.02.05
Clinching withLocal Incision
Clinching withoutLocal Incision
Without Adhesive
With Pasty Adhesive
With Adhesive Film
Without Adhesive
Source: Budde
TALAT 4105 12
4105.03 Properties of Combination Joints
• Criteria for the use of combined joining technologies • Results of fatigue tests with adhesive joints • Impact strength of different joints • Shear strength of different joints with and without ageing • Comparison of properties of different joining technologies
Criteria for the Use of Combined Joining Technologies In principle, the choice of the combined technology, mechanical fastening and adhesive joining, which may be used for joining in light constructions depends mainly on two application criteria. In mechanical fastenings combined with adhesive joining, the former is the main joining process. The adhesive used serves primarily as a sealant, corrosion inhibitor and/or as a damping material. In adhesive joints combined with mechanical joining, the former is the main joining process. The mechanical joining serves as a positioning (fixing) help and helps the adhesive joint to withstand peeling forces and long-time static forces (Figure 4105.03.01).
4105.03.01
Mechanical Joining Combined with Adhesive Joining
Clinching is the main joining process. The applied adhesive servesprimarily as sealant, corrosion protection and/ or damping materialand relieves the joint in regions where the force lines lie outside thejoining point.
Adhesive joining Combined with Mechanical Fastening
Adhesive joining is the main joining process. The mechanical jointserves as a help in fixing and relieves the adhesive layer duringfabrication or peeling loads or long-time static loads.
Source: Budde
Training in Aluminium Application Technologies
alu Criteria for the Use of Combined Joining Technologies
TALAT 4105 13
Results of Fatigue Tests with Adhesive Joints The properties of the adhesive used are the main deciding criteria for the application. Under quasi static, dynamic and impact loading, the load carrying capacity of, for example, clinched adhesive joints compares well with that of spot welded joints (see Figure 4105.03.02). Under the action of dynamic loads, the geometric notch effect of the "point formed" joint element has a deleterious effect on the load carrying capacity of the combined joint.
Training in Aluminium Application Technologies
alu
103 4 5 6 7 8
10 10 10 10 10No. of Cycles
Forc
e Am
plitu
de
Results of Fatigue Tests with Adhesive Joints 4105.03.02
BA
BC
A
Pasty EpoxyResin Adhesive
CAdhesive Joint Spot WeldedAdhesive Joint
Clinched-Adhesive Joint
Source: Budde
6,0
5,0
4,0
3,0
2,0
N / mm2
f = 80 Hz / R =0,0
F F
Al Mg 5 Mn
1,0
4535
105
1,0
Impact Strength of Different Joints Joints made with ductile adhesives having a high deformability and low strength behave differently. Here again, depending on the loading, the joint strength is determined mainly by the clinch joint (Figure 4105.03.03). By giving proper consideration to factors like property profile and processing properties of the adhesive, it is basically possible to design combined joints with properties which are a combination of the individual properties of the joints.
TALAT 4105 14
alu
Training in Aluminium Application Technologies
BA C
Rup
ture
Ene
rgy
5
0
10
15
20
J
A B C
Spot Welding Clinching Adhesive Joiningwith Adhesive Band
DD
DD
Impact Strength of Different Joints 4105.03.03
Source: Budde
Vs= 5 m/s
F F
Al Mg 5 Mn
1,0
4535
105
1,0
Shear Strength of Different Joints With and Without Ageing In connection with combined fastenings of mechanical and adhesive joints, the aspect of ageing of the combined joint plays a central role.
It has been found that corrosion increases the strength of riveted and clinched joints of aluminium sheets (see Figure 4105.03.04). This is due to the fact that the corrosion products of aluminium occupy a larger volume than the uncorroded aluminium material. This increases the strain on the joint causing the force locking component to increase.
Although the mechanical fastening process can cause aluminium sheets to be pulled apart in the joint vicinity, the supporting action of the mechanical joint in the combined mechanical-adhesive joint greatly reduces the decrease in joint strength caused by ageing.
Training in Aluminium Application Technologies
alu
ElementaryJoint
CombinedJoint
without Corrosionwith Corrosion
Single-Element SamplesAlMg4.5Mns=1.0mm v=10mm/min
0
2
4
6
8
10
kN
Rup
ture
forc
e
AdhesiveJoining
Clinching PunchRiveting
Clinching andAdhesiveJoining
Riveting andAdhesiveJoining
Shear Strength of Different Jointswith and without Ageing 4105.03.04
Source: Singh
TALAT 4105 15
Comparison of Properties of Different Joining Technologies Mechanical fastening methods, used alone or in combination with adhesive joining, improve the standard of quality as far as rigidity, damping of noise and vibrations, pressure tightness and corrosion protection are concerned, making this an interesting proposal for highly stressed aluminium constructions (Figure 4105.03.05).
4105.03.05
Source: Budde
Comparison of Properties of Different Joining Technologies
Joining Technology
Characteristics
AdhesiveJoining Spot Welding Clinching Riveting
Large Surface
Plane Surface
Very Sensitiveto Environment
Depend onDirection
Joint
Properties
Local
Uneven Surface
ConditionallySensitive toEnvironment
Depend on Direction
Local
DeformedSurface
ConditionallySensitive toEnvironment
Depend on Direction
Local
DamagedSurface
Sensitive toEnvironment
Depend on Direction
Training in Aluminium Application Technologies
alu
4105.04 Literature/References 1. Budde, L. Untersuchungen zur Kombination quasi-formschlüssiger und
2. Wittke, K. und Füssel, U. Kombinierte Fügeverbindungen. Wissenschaftliche Schriftenreihe der TU Chemnitz 13/1986
3. Patrick, E. and Sharp, M.L. Joining methods for aluminium car body structures. Automotive Technology International (1993), 61-70
4. Füssel, U. Kombinierte Fügeverbindungen. Habilitation TU Chemnitz, 1989
5. Endlich, W. Klebdichten. Angewandte Technik 1 (1988) 4, 4-31
6. Stepanski, H. Punktschweißkleben von Karosserieblechen aus Stahl und Aluminium. Dissertation TH Aachen, 1980
7. Budde, L. Alternative Lösungen für Fügeprobleme durch Verbindungskombinationen. Der Konstrukteur 23 (1992) 1/2, 22-25
TALAT 4105 16
4105.05 List of Figures Figure No. Figure Title (Overhead) 4105.01.01
Comparison of Functional Characteristics of Different Fastening Technologies
4105.01.02 Classification Index of Joints 4105.01.03 Advantages of Combined Joint Types 4105.01.04 Properties of Elementary Joints 4105.01.05 Main Advantages and Disadvantages of Adhesive Joining 4105.01.06 Fold-Adhesive Joints 4105.01.07 Examples of Combined Joints Used in the Aircraft Industry 4105.01.08 Combination of Material Locking and Form Locking Joints 4105.01.09 Fractured Surface of Combined Joints After Shear Testing 4105.02.01
Production of Combined Joints
4105.02.02 Production Variants for Combined Joints 4105.02.03 Operations in the Production of an Adhesive-Clinch Joint Combination 4105.02.04 Methods of Producing Adhesively Joint and Clinched Fastenings 4105.02.05 Form of Clinched Joints with and without Adhesives 4105.03.01
Criteria for the Use of Combined Joining Technologies
4105.03.02 Results of Fatigue Tests with Adhesive Joints 4105.03.03 Impact Strength of Different Joints 4105.03.04 Shear Strength of Different Joints with and without Ageing 4105.03.05 Comparison of Properties of Different Joining Technologies