North & South America Taconic - Headquarters Petersburgh, NY 12138 Tel: 518-658-3202 / 1-800-833-1805 [email protected]Europe/Middle East/Australia Taconic International Ltd. Republic of Ireland Tel: +353-44-9395600 [email protected]Asia Korea Taconic Company Republic of Korea Tel: +82-31-704-1858 [email protected]China Taconic Advanced Material (Suzhou) Co., Ltd. Suzhou City, China Tel: +86-512-6286-7170 [email protected]TacLamplus Benefits & Applications: • Laser Ablatable • Sequential Multilayer • Very Low Loss • Low Moisture Absorption • High Peel Strength • Uniform & Consistent DK • Automotive Radar • mmWave Radios • Power Amplifiers TacLamplus is a cost effective, non- reinforced microwave substrate that can used to create very low loss structures both with single dielectric layers and multiple layers. Exceptional copper foil adhesion allows small feature resolution and the unique composition of the dielectric facilitates clean laser ablation for micro via and component cavity formation. e use of metal plate such as 1 mm copper helps maintain dimensional stability and provides a sound ground plane and heat sink. An ISO 9001 Registered Company www.taconic-add.com Commercial and Government Entity (CAGE) Code: 1C6Q9
4
Embed
TacLamplus - Электронные компоненты - ГК Радиант ... copper foil adhesion allows small feature resolution and the unique composition of the dielectric
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
North & South AmericaTaconic - HeadquartersPetersburgh, NY 12138
• Sequential Multilayer • Very Low Loss • Low Moisture Absorption • High Peel Strength • Uniform & Consistent DK
• Automotive Radar • mmWave Radios • Power Amplifiers
TacLamplus is a cost effective, non-reinforced microwave substrate that can used to create very low loss structures both with single dielectric layers and multiple layers.
Exceptional copper foil adhesion allows small feature resolution and the unique composition of the dielectric facilitates clean laser ablation for micro via and component cavity formation.
The use of metal plate such as 1 mm copper helps maintain dimensional stability and provides a sound ground plane and heat sink.
An ISO 9001 Registered Companywww.taconic-add.com
Commercial and Government Entity (CAGE) Code: 1C6Q9
0.017 mm (0.05 oz) ED copper
1.0 mm (0.039") copper
0.10 mm (0.0040") TacLamplus
Typical Construction for Metal-Backed Designs*
* Other combinations are available upon request
TacLamplus
Layer 7
Layer 2
Layer 3
Layer 4
Layer 5
Layer 6
FR-4
TacLamplus 210 core
Typical Construction for Hybrid Multilayer Designs*
core
core
core
prepreg
prepreg
prepreg
Waveguide Laser MicroviaK-Type Cavity
Laser Cut MMIC Cavity
TacLamplus dielectric thickness is tailored to suit short length wire bonding.
105 micron (3 oz.) copper foil backing
TacLamplus Typical ValuesProperty Test Method Unit Value Unit Value