TABLE OF CONTENTS
HYDRAULIC EARTH AUGER DRIVE UNITS.................2 - 3
CONSTRUCTION AUGERS .................................................4
TREE AUGERS.....................................................................4
ROCK AUGERS....................................................................5
UTILITY STYLE AUGERS ....................................................5
MINI-SKID AUGER DRIVES .................................................6
MINI-SKID CONSTRUCTION AUGERS ...............................6
MOUNTING BRACKETS ......................................................7
AUGER EXTENSIONS .........................................................8
DRIVE UNIT ADAPTERS .....................................................8
SELECTING COMPLETE UNIT ...........................................9
HOSES & FITTINGS .............................................................9
TEETH & POINTS.................................................................9
AUGER COLLARS ...............................................................9
REPLACEMENT WEAR PARTS ..........................................9
ACCESSORIES ....................................................................9
pre
mie
ratt
ac
h.c
om
1-8
66
-45
8-0
00
8
There’s no better choice than PREMIERPREMIER has built the most reliable earth auger attachments for over 3 decades. With a completeand comprehensive line of earth auger drive units, auger bits, adapters, extensions, teeth and acces-sories, rest assured that PREMIER is the one-stop source for all of your earth auger needs. With our mod-ern state-of-the-art manufacturing facility located in Fort Wayne, Indiana, we can provide the high qualitysolutions and prompt service needed to meet the needs of even the most demanding job.
PREMIER POWERTorques for virtually any digging application.
Premier Hydraulic Earth Auger Drive Units are designed to
utilize the power of the host machine most efficiently, turning
it into a high performance drilling machine. Without leaving
the vehicle seat, an equipment operator can dig hundreds of
holes daily in the toughest digging conditions for fence
posts, sign posts, post frame buildings, foundation footings,
tree planting, light and utility poles and many other applica-
tions that require vertical or angled holes in the ground.
PREMIER VERSATILITYComplete line of Drive Units, Auger Bits, Adapters,
Extensions, Teeth, and Accessories.
Premier Earth Auger Attachments are easily adapted to
skid steer loaders, wheel loaders, tractors, mini-skids,
backhoes, excavators, forklifts, cranes, digger derricks,
mini-digger derricks, and other hydraulic machines.
PREMIER SERVICEBest lead times in the industry.
No matter how unique your digging application may
be, it's our job to provide the solution when you
need it.
PREMIER WARRANTYWe stand behind our quality statement.
Premier Auger takes great pride in the quality and
reliability of our products. To reassure you that you
are always buying the very best, we offer the best
warranties in the industry and we stand behind
each quality statement.
POWERFUL, VERSATILE AND RELIABLE EARTH AUGER ATTACHMENTS BACKED BY THE BEST LEAD TIMES AND WARRANTIES IN THE INDUSTRY
2
PLANETARY AUGER DRIVE UNITS
Max. Auger Diameter ....................30”
Min. Hydraulic GPM ................10 gpm
Max. Hydraulic GPM ..............25 gpm
Max. Hydraulic PSI ................3500 psi
2-9/16” Round or 2” Hex Output Shaft
5 Year WarrantyGPM - RPM PSI - TORQUE
12 ..............47 2500 ............1975
15 ..............58 3000 ............2372
17 ..............66 3500 ............2768
20 ..............78
H015PD
MEDIUM DUTY
HEAVY DUTY
Skid Steer Loaders • Compact Excavators • Tractors • Telehandlers
All Mounting Brackets, Hose Kits and Couplers Listed on Pages 7 - 9
Max. Auger Diameter ....................36”
Min. Hydraulic GPM ................15 gpm
Max. Hydraulic GPM ..............30 gpm
Max. Hydraulic PSI ................3500 psi
2-9/16” Round or 2” Hex Output Shaft
5 Year WarrantyGPM - RPM PSI - TORQUE
15 ..............46 2500 ............2481
18 ..............56 3000 ............2977
20 ..............62 3500 ............3474
25 ..............77
H019PDMax. Auger Diameter ....................36”
Min. Hydraulic GPM ................20 gpm
Max. Hydraulic GPM ..............35 gpm
Max. Hydraulic PSI ................3250 psi
2-9/16” Round or 2” Hex Output Shaft
5 Year WarrantyGPM - RPM PSI - TORQUE
20 ..............48 2500 ............3184
24 ..............58 3000 ............3821
26 ..............63 3250 ............4140
30 ..............72
H024PD
Max. Auger Diameter ....................24”
Min. Hydraulic GPM..................6 gpm
Max. Hydraulic GPM ..............15 gpm
Max. Hydraulic PSI................3500 psi
2-9/16” Round or 2” Hex Output Shaft
5 Year Warranty GPM - RPM PSI - TORQUE
8 ................48 2500 ............1274
10 ..............60 3000 ............1529
12 ..............72 3500 ............1783
15 ..............90
H010PD
Max. Auger Diameter ..................18”
Min. Hydraulic GPM ................7 gpm
Max. Hydraulic GPM ............14 gpm
Max. Hydraulic PSI ..............3500 psi
2” Hex Output Shaft
3 Year WarrantyGPM - RPM PSI - TORQUE
7 ................48 2500..........1123
9 ................61 3000 ........1347
11 ..............75 3500 ........1571
13 ..............88
MD09PDMax. Auger Diameter ..................15”
Min. Hydraulic GPM ................5 gpm
Max. Hydraulic GPM ............10 gpm
Max. Hydraulic PSI ..............3500 psi
2” Hex Output Shaft
3 Year WarrantyGPM - RPM PSI - TORQUE
5 ................52 2500 ..........734
7 ................73 3000 ..........881
9 ................93 3500 ........1028
10..............104
MD06PD
Max. Auger Diameter ..................36”
Min. Hydraulic GPM ..............15 gpm
Max. Hydraulic GPM ............30 gpm
Max. Hydraulic PSI ..............3500 psi
2-9/16” Round or 2” Hex Output Shaft
3 Year WarrantyGPM - RPM PSI - TORQUE
15 ..............50 2500 ........2290
18 ..............60 3000 ........2748
20 ..............67 3500 ........3206
25 ..............83
MD18PDMax. Auger Diameter ..................24”
Min. Hydraulic GPM ................8 gpm
Max. Hydraulic GPM ............17 gpm
Max. Hydraulic PSI ..............3500 psi
2” Hex Output Shaft
3 Year WarrantyGPM - RPM PSI - TORQUE
9 ................49 2500 ........1409
11 ..............59 3000 ........1691
13 ..............71 3500 ........1972
15 ..............81
MD12PDMax. Auger Diameter ..................30”
Min. Hydraulic GPM ..............10 gpm
Max. Hydraulic GPM ............20 gpm
Max. Hydraulic PSI ..............3500 psi
2-9/16” Round or 2” Hex Output Shaft
3 Year WarrantyGPM - RPM PSI - TORQUE
12 ..............50 2500 ........1825
15 ..............61 3000 ........2190
17 ..............71 3500 ........2555
20 ..............83
MD14PD
PHONE 1-866-458-0008 • FAX 260-456-6868 • WEB premierattach.com
Max. Auger Diameter ......................48”
Min. Hydraulic GPM..................25 gpm
Max. Hydraulic GPM ................45 gpm
Max. Hydraulic PSI ................4500 psi
No Case Drain Line Required2” Hex or 2-1/2” Hex Output Shaft5 Year Warranty
GPM - RPM PSI - TORQUE
25 ................53 2500 ............3624
30 ................63 3000 ............4349
35 ................74 3500 ............5074
40 ................85 4000 ............5798
H045PD
Max. Auger Diameter ......................48”
Min. Hydraulic GPM..................30 gpm
Max. Hydraulic GPM ................60 gpm
Max. Hydraulic PSI ................4500 psi
No Case Drain Line Required2” Hex or 2-1/2” Hex Output Shaft5 Year WarrantyGPM - RPM PSI - TORQUE
35 ................58 2500 ............4578
40 ................67 3000 ............5493
45 ................75 3500 ............6409
50 ................84 4000 ............7325
H055PDMax. Auger Diameter ......................48”
Min. Hydraulic GPM ................30 gpm
Max. Hydraulic GPM ................60 gpm
Max. Hydraulic PSI ................4500 psi
No Case Drain Line Required2” Hex or 2-1/2” Hex Output Shaft3 Year WarrantyGPM - RPM PSI - TORQUE
40 ................54 2500 ............5722
45 ................60 3000 ............6867
50 ................67 3500..............8011
55 ................74 4000 ............9156
H065PD
Max. Auger Diameter ....................48”
Min. Hydraulic GPM ................30 gpm
Max. Hydraulic GPM ..............60 gpm
Max. Hydraulic PSI ................4500 psi
No Case Drain Line Required2-1/2” Hex Output Shaft3 Year WarrantyGPM - RPM PSI - TORQUE
40 ............43 3000................8527
45 ............49 3500................9948
50 ............54 4000 ............11,369
60 ............65 4500 ............12,790
H075PDMax. Auger Diameter......................48”
Min. Hydraulic GPM ................30 gpm
Max. Hydraulic GPM................60 gpm
Max. Hydraulic PSI ................3500 psi
No Case Drain Line Required2-1/2” Hex Output Shaft3 Year WarrantyGPM - RPM PSI - TORQUE
40 ............54 2500................8957
45 ............39 3000 ............10,748
50 ............43 3500 ............12,539
60 ............51
H085PD
3
HIGH FLOW AUGER DRIVE UNITSBackhoes • Articulated Loaders • Tractor Loaders • Integrated Tool Carriers
Telescopic Handlers • Excavators • Boom Cranes • Digger Derricks
Max. Auger Diameter ......................48”
Min. Hydraulic GPM..................20 gpm
Max. Hydraulic GPM ................45 gpm
Max. Hydraulic PSI ................4500 psi
No Case Drain Line Required2” Hex or 2-1/2” Hex Output Shaft5 Year Warranty
GPM - RPM PSI - TORQUE
20 ................53 2500 ............2861
25 ................67 3000 ............3433
30 ................80 3500 ............4005
35 ................94 4000 ............4578
H040PD
Max. Auger Diameter ....................48”
Min. Hydraulic GPM ................30 gpm
Max. Hydraulic GPM ..............60 gpm
Max. Hydraulic PSI ................4500 psi
No Case Drain Line Required2-1/2” Hex Output Shaft2 Year Warranty
GPM - RPM PSI - TORQUE
45 ............30 2500 ............11,213
50 ............34 3000 ............13,455
55 ............37 3500 ............15,698
60 ............41 4000 ............17,941
H095PD
PHONE 1-866-458-0008 • FAX 260-456-6868 • WEB premierattach.com
All Mounting Brackets, Hose Kits and Couplers Listed on Pages 7 - 9
DIA. PART# TOOTH QTY.04" ........A04CDF4 ..........0
06" ........A06CDF4 ..........2
08" ........A08CDF4 ..........2
09" ........A09CDF4 ..........3
10" ........A10CDF4 ..........3
12" ........A12CDF4 ..........4
15" ........A15CDF4 ..........5
16" ........A16CDF4 ..........5
18" ........A18CDF4 ..........6
20" ........A20CDF4 ..........6
24" ........A24CDF4 ..........8
30" ........A30CDF4 ..........9
36" ........A36CDF4 ........11
4’ OVERALL LENGTH
Light to Moderate Ground Conditions• One Piece Cast Steel Boring Head• Hardened Bolt-on Gage Teeth on Outside Positions• Hardened Bolt-on Wisdom Teeth on Inside Positions• Hardened Fishtail Point• Heavy-Duty Double Flighting• 2” Round, 2-9/16” Round, and 2” Hex Collars• 4’ Standard Length• Also Available in 3’, 5’, and 6’ Lengths, Upon Request
Gage Tooth
#00202
Bolt-on
Wisdom
Tooth #00200
Fishtail Point
#00203
Upgrade and Replacement Parts Listed on Page 9
Difficult Ground Conditions, Compacted Soils, Heavy Clay, Asphalt, Frozen Ground, Fracturable RockDIA. PART# TOOTH QTY.06"........A06CDC4..........2
08"........A08CDC4..........4
09"........A09CDC4..........4
10"........A10CDC4..........4
12"........A12CDC4..........4
15"........A15CDC4..........6
16"........A16CDC4..........6
18"........A18CDC4..........6
20" ......A20CDC4..........6
24"........A24CDC4..........8
30"........A30CDC4 ........10
36"........A36CDC4 ........12
42"........A42CDC4 ........16
48"........A48CDC4 ........18
4’ OVERALL LENGTH
• Heavy-Duty Cast Steel Boring Head• Hardened Drive-in Gage Teeth on Outside Positions• Hardened Drive-in Chisel Teeth on Inside Positions• Hardened Fishtail Point• Heavy-Duty Double Flighting• 2” Round, 2-9/16” Round, and 2” Hex Collars• 4’ Standard Length• Also Available in 3’, 5’, and 6’ Lengths, Upon Request
Chisel Tooth
#00201
Fishtail Point
#00203
Upgrade and Replacement Parts Listed on Page 9
Gage Tooth
#00202
4
MEDIUM DUTY DOUBLE FLIGHTING
DIA. PART# TOOTH QTY.04"......A04CDF4SF........0
06"......A06CDF4SF........2
09"......A09CDF4SF........3
12"......A12CDF4SF........4
15"......A15CDF4SF........5
18"......A18CDF4SF........6
24"......A24CDF4SF........8
4’ OVERALL LENGTH
Light to Moderate Ground Conditions• One Piece Cast Steel Boring Head• Hardened Bolt-on Gage Teeth on Outside Positions• Hardened Bolt-on Wisdom Teeth on Inside Positions• Hardened Fishtail Point• Economical Single Flighting• 2” Round, 2-9/16” Round, and 2” Hex Collars• 4’ Length Only
Gage Tooth
#00202
Bolt-on
Wisdom
Tooth #00200
Fishtail Point
#00203
Upgrade and Replacement Parts Listed on Page 9
CONSTRUCTION AUGERS
PHONE 1-866-458-0008 • FAX 260-456-6868 • WEB premierattach.com
HEAVY DUTY DOUBLE FLIGHTING
MEDIUM DUTY SINGLE FLIGHTING
DIA. PART# TOOTH QTY.06" ......A06CDR4 ..........6
09" ......A09CDR4 ........10
12" ......A12CDR4 ........12
16" ......A16CDR4 ........16
18" ......A18CDR4 ........18
20" ......A20CDR4 ........20
24" ......A24CDR4 ........24
30" ......A30CDR4 ........30
36" ......A36CDR4 ........36
4’ OVERALL LENGTH
• Cast Steel Boring Head• Bullet Style Teeth• Heavy-Duty Single Fighting• 3/4” Thick Bottom Flight• 2” Round, 2-9/16” Round, and
2” Hex Collars• 4’ Length Standard• Other Sizes Available Upon Request• Upgrade and Replacement Parts Listed on Page 9
CRB
Rock Auger Pilot
#00239
“UDC” UTILITY STYLE AUGERS Use on High Torque Drive Unit Models H055PD, H065PD, H075PD, H085PD, H095PD
DIA. PART# TOOTH QTY.09" ......A09UDC9 ..........2
12" ......A12UDC9 ..........4
16" ......A16UDC9 ..........4
18" ......A18UDC9 ..........6
20" ......A20UDC9 ..........6
24" ......A24UDC9 ..........7
30" ......A30UDC9 ..........8
36" ......A36UDC9 ..........8
42” ......A42UDC9 ........12
48” ......A48UDC9 ........14
5’ and 9’ Standard Lengths Available
• Heavy-Duty Cast Steel Boring Head• Outside Drive-in Gage Teeth• Standard or Carbide Teeth & Point• Heavy-Duty 3/8” Thick Flighting• Extra Heavy-Duty Center Shaft (3-3/4” Tubing x 5/8” Wall)• 2-1/2” Hex and 2-5/8” Hex Collars• Optional 3” Hex Collar Available• Replaceable Shank Plates• Special Sizes Available Upon Request• Carbide Upgrades and Replacement Parts Listed on Page 9
Utility
Gage Tooth
#00214
Utility
Dirt Tooth
#00213
Utility
Fishtail Point
#00217
“CDR” BULLET TOOTH ROCK AUGERS
“CRB” ROCK AUGER• Aggressive Carbide Cutting Head• Heavy-Duty Single Fighting• 2” Round, 2-9/16” Round, and 2” Hex Collars• 4” Diameter Only• 4’ Length Standard• Other Sizes Available Upon Request• Upgrade and Replacement Parts Listed on Page 9
CDR Rock Auger
Bullet Tooth
# 00221
DIA. PART# TOOTH QTY.04" ......A04CRB4 ..........0
5
CDR Rock Auger Pilot
1-3/4” Square Shank
# 00236
ROCK AUGERS Solid and Fracturable Rock, Compacted Soils, Frozen Ground, Asphalt, Concrete
For Tree and Shrub PlantingDIA. PART# TOOTH QTY.18” ........A18CDT4 ........7
24" ........A24CDT4 ........10
30" ........A30CDT4 ........11
36" ........A36CDT4 ........13
42" ........A42CDT4 ........15
48" ........A48CDT4 ........17
4’ OVERALL LENGTH
• Two-Diameter Design• Fabricated Boring Head• Hardened Bolt-On Gage Teeth on Outside Positions• Hardened Bolt-On Wisdom Teeth on Inside Positions• Hardened Fishtail Point• Heavy-Duty Double Flighting• 2” Round, 2-9/16” Round, and 2” Hex Collars
Gage Tooth
#00202
Bolt-on
Wisdom
Tooth #00200
Fishtail Point
#00203
TREE AUGERS
PHONE 1-866-458-0008 • FAX 260-456-6868 • WEB premierattach.com
MINI-SKID LOADER EARTH AUGER DRIVE
MINI-SKID AUGERSMEDIUM DUTY “CDF” AUGER
• For Light to Medium Ground Conditions• One Piece Cast Steel Boring Head• Hardened Bolt-on Wisdom Teeth - Inside Positions• Hardened Bolt-on Gage Teeth - Outside Positions• Hardened Fishtail Point• Heavy-Duty Double Flighting• 2” Round, 2-9/16” Round, or 2” Hex Collars• Standard 42” Overall Length• Also Available in 30” Overall Length
DIA. PART# TOOTH QTY.04" ..........A04CDF3 ..................0
06" ..........A06CDF3 ..................2
08" ..........A08CDF3 ..................2
09" ..........A09CDF3 ..................3
10" ..........A10CDF3 ..................3
12" ..........A12CDF3 ..................4
15" ..........A15CDF3 ..................5
16" ..........A16CDF3 ..................5
18" ..........A18CDF3 ..................6
20" ..........A20CDF3 ..................6
24" ..........A24CDF3 ..................8
30" ..........A30CDF3 ..................9
36" ..........A36CDF3 ..................11
HEAVY DUTY “CDC” AUGER• For Difficult Ground Conditions, Compacted Soils, Heavy
Clay, Asphalt, Frozen Ground, Fracturable Rock• Heavy-Duty Cast Steel Boring Head• Hardened Drive-in Gage Teeth - Outside Positions• Hardened Drive-in Chisel Teeth - Inside Positions• Hardened Fishtail Point• Heavy-Duty Double Flighting• 2” Round, 2-9/16” Round, or 2” Hex Collars• Standard 42” Overall Length• Also Available in 30” Overall Length
DIA. PART# TOOTH QTY.06" ..........A06CDC3 ..................2
08" ..........A08CDC3 ..................4
09" ..........A09CDC3 ..................4
10" ..........A10CDC3 ..................4
12" ..........A12CDC3 ..................4
15" ..........A15CDC3 ..................6
16" ..........A16CDC3 ..................6
18" ..........A18CDC3 ..................6
20" ..........A20CDC3 ..................6
24" ..........A24CDC3 ..................8
30" ..........A30CDC3..................10
36" ..........A36CDC3..................12
Gage Tooth
#00202
Chisel Tooth
#00201
Fishtail Point
#00203
• Full Swivel is Standard Equipment• All Units Include Hose Kit and Flat Faced Couplers
Gage Tooth
#00202
Bolt-on Wisdom
Tooth #00200
Fishtail Point
#00203
Upgrade and Replacement Parts Listed on Page 96
Max. Auger Diameter ....................24”
Min. Hydraulic GPM ..................6 gpm
Max. Hydraulic GPM ..............12 gpm
Max. Hydraulic PSI ................3500 psi
2-9/16” Round or 2” Hex Output Shaft
3 Year WarrantyGPM - RPM PSI - TORQUE
7................45 2500 ............1274
9................58 3000 ............1529
11 ..............71 3500 ............1783
MS11PD
Max. Auger Diameter ....................30”
Min. Hydraulic GPM ................10gpm
Max. Hydraulic GPM ..............20 gpm
Max. Hydraulic PSI ................3500 psi
2-9/16” Round or 2” Hex Output Shaft
3 Year Warranty
GPM - RPM PSI - TORQUE
12..............50 2500 ............1825
15..............61 3000 ............2190
17..............71 3500 ............2555
MS14PD
Max. Auger Diameter ....................36”
Min. Hydraulic GPM ................15 gpm
Max. Hydraulic GPM ..............25 gpm
Max. Hydraulic PSI ................3500 psi
2-9/16” Round or 2” Hex Output Shaft
3 Year Warranty
GPM - RPM PSI - TORQUE
15..............50 2500 ............2290
18..............60 3000 ............2748
20..............67 3500 ............3206
MS18PD
PHONE 1-866-458-0008 • FAX 260-456-6868 • WEB premierattach.com
DIA. PART# TOOTH QTY.18” ..........A18CDT4............7
36" ..........A36CDT4 ..........13
4’ OVERALL LENGTH
TREE AUGERS• Two-Diameter Design• Fabricated Boring Head• Hardened Bolt-On Gage Teeth on Outside Positions• Hardened Bolt-On Wisdom Teeth on Inside Positions• Hardened Fishtail Point• Heavy-Duty Double Flighting• 2” Round, 2-9/16” Round, and 2” Hex Collars
Gage Tooth
#00202
Bolt-on Wisdom
Tooth #00200
Fishtail Point
#00203
MOUNTING BRACKETS
Universal Skid Steer Mount SAE J2513 - Part # SM001
OFF-SET UNIVERSAL SKID STEER MOUNT - Part # SM020
EURO/UNIVERSAL LOADER MOUNT - Part # SM021
Available with Off-Set Option
High Reach Mount Extension -
Part # SMEX01
Hooks up to any Universal Skid Steer
Mount for increased digging depth.
JOHN DEERE 200 - 500 TRACTOR LOADER MOUNT - Part # SM019
Available with Off-Set Option
TRACTOR LOADER MOUNTS - Part # TM001
Attach to lip of loader bucket or arm.
BACKHOE, MINI-EXCAVATORS & EXCAVATOR MOUNTS Pin-On Mounts - available for any excavator. Contact factory with make and model for
specific part number and pricing.
Pin Grabber Style Mounts - available for any excavator or back-
hoe. Cradle function is standard. Contact Factory with make and
model for specific part number and pricing.
Dedicated Quick Attach Systems - available for
most makes of excavators or backhoes, such as but
not limited to: Bobcat, Kubota, John Deere, Cat,
Wain Roy, Case and others. Cradle function is
standard.
Custom Mounts Available
All mounts built to be compatible with all makes and models of equipment.
7
Ag Style Equipment
Down Pressure Mount - Part # SM026
Additional weights sold separately
PHONE 1-866-458-0008 • FAX 260-456-6868 • WEB premierattach.com
Skid Steer Mounts include required hardware and pins to attach to Premier Earth Auger Drives, complete with swivel,knuckle, auger drive, cradle, and connecting pins (greaseable and retained with snap rings).
Construction Equipment
JOHN DEERE 600 & 700 - Part # SM027
Contact factory for information on mounting brackets for
older model skid steer loaders.
SKID STEER LOADER MOUNTS
AUGER EXTENSIONS VARIABLE LENGTH AUGER EXTENSIONSVariable Length Auger Extensions store inside the tube of augers that are 10”
diameter or larger. Extension increments are every six inches on 12” through
24” extensions and every twelve inches on 48” and 72” extensions. Available
with 2” and 2-9/16” Round,
and 2”, 2-1/2” and 2-5/8”
Hexagon Collars. Special
Extensions are available
and priced upon request.
2” Rnd Variable Extension 12” Long ........................CVE12R200
2" Hex Variable Extension 12" Long ........................CVE12H200
2-9/16" Variable Extension 12" Long ......................CVE12R256
2” Rnd Variable Extension 24” Long ........................CVE24R200
2" Hex Variable Extension 24" Long ........................CVE24H200
2-9/16" Variable Extension 24" Long ......................CVE24R256
2" Rnd Variable Extension 48" Long ........................CVE48R200
2" Hex Variable Extension 48" Long ........................CVE48H200
2-9/16" Variable Extension 48" Long ......................CVE48R256
2" Rnd Variable Extension 72" Long ........................CVE72R200
2" Hex Variable Extension 72" Long ........................CVE72H200
2-9/16" Variable Extension 72" Long ......................CVE72R256
2-1/2” Hex Variable Extension 72" Long ..................UVE72H250
2-5/8” Hex Variable Extension 72" Long ..................UVE72H262
72”
12” 12” 12” 12” 12” 12” 2”
FIXED LENGTH AUGER EXTENSIONSFixed Length Auger Extensions extend the auger’s digging depth exactly the
length of the extension. Available with 2” and 2-9/16” Round, and 2”, 2-1/2”
and 2-5/8” Hexagon Collars.
Special Extensions are
available and priced upon
request. 72” 2”
2" Rnd Fixed Extension 12" Long ............................CFE12R200
2" Hex Fixed Extension 12" Long ............................CFE12H200
2-9/16" Fixed Extension 12" Long ............................CFE12R256
2" Rnd Fixed Extension 24" Long ............................CFE24R200
2" Hex Fixed Extension 24" Long ............................CFE24H200
2-9/16" Fixed Extension 24" Long ............................CFE24R256
2" Rnd Fixed Extension 48" Long ............................CFE48R200
2" Hex Fixed Extension 48" Long ............................CFE48H200
2-9/16" Fixed Extension 48" Long ............................CFE48R256
2" Rnd Fixed Extension 72" Long ............................CFE72R200
2" Hex Fixed Extension 72" Long ............................CFE72H200
2-9/16" Fixed Extension 72" Long ............................CFE72R256
2-1/2” Hex Fixed Extension 72” Long ......................UFE72H250
2-5/8” Hex Fixed Extension 72” Long ......................UFE72H262
Couple Premier Drive Units to competitive
augers or Premier Augers to competitive
drive units. Determine the drive unit output
shaft and collar opening sizes and types
(round or hexagon) to select the proper
adapter. Special Adapters are available and
priced upon request.
2" Hex Female To 2-9/16" Rnd Male Adapter ............C200H256R
2" Hex Female To 2" Rnd Male Adapter ....................C200H200R
2-9/16" Rnd Female To 2" Hex Male Adapter ..........C256R200H
2-9/16" Rnd Female To 2" Rnd Male Adapter ..........C256R200R
2" Rnd Female To 2" Hex Male Adapter ....................C200R200H
2" Rnd Female To 2-9/16" Rnd Male Adapter ............C200R256R
ADAPTERS FOR DRIVE UNITS & AUGERS
8 PHONE 1-866-458-0008 • FAX 260-456-6868 • WEB premierattach.com
HOSES & FITTINGS
MISCELLANEOUSWEAR PARTS
AUGER COLLARS
When pricing a complete HydraulicEarth Auger Attachment for yourmachine, include the following:
Hydraulic Drive Unit
Hoses and Fittings
Mounting Bracket
Auger
Optional Auger Upgrades and Accessories
Spare Replacement Wear Parts
1/2” Hydraulic Hoses 68" Long ........................#610611/2” Hydraulic Hoses 108" Long ......................#610501/2” Hydraulic Hoses 120" Long ......................#610491/2” Female Flat Faced Coupler ......................#610061/2” Male Flat Faced Coupler ..........................#610073/4” Hydraulic Hose Kit 108” Long ..................#610513/4” Female Flat Faced Coupler ......................#610433/4” Male Flat Faced Coupler ..........................#61044
2" Hex Auger Collar..........................................#001022-9/16" Round Auger Collar ............................#001012" Round Auger Collar......................................#001002-1/2" Hex Collar ..............................................#001032-5/8" Hex Collar ..............................................#00104
Knuckle Pin ......................................................#91001Drive Unit Housing ..........................................#91000
UTILITY AUGER TEETHUtility Dirt Tooth ..........................................................#00213 Utility Gage Tooth........................................................#00214Utility Carbide Dirt Tooth ............................................#00215Utility Carbide Gage Tooth ..........................................#00216
UTILITY AUGER PILOT POINTSUtility Fishtail Point......................................................#00217Utility Hardfaced Fishtail Point ....................................#00218Utility Carbide Fishtail Point ........................................#00219Utility Drive Lug ..........................................................#00220 Utility Pilot Adapter ....................................................#00224
9
ACCESSORIES AND REPLACEMENT WEAR PARTS
TEETH & POINTS
CONSTRUCTION AUGER TEETHWisdom Tooth..............................................................#00200Chisel Tooth ................................................................#00201 Wisdom Gage Tooth....................................................#00202 Hardfaced Wisdom Tooth............................................#00205Hardfaced Chisel Tooth ..............................................#00206Hardfaced Wisdom Gage Tooth ..................................#00207Carbide Wisdom Tooth................................................#00208 Carbide Chisel Tooth ..................................................#00209 RB Carbide Wisdom Tooth..........................................#00237Tooth Pocket for CDC Augers ....................................#00225 Rock Auger Bullet Tooth..............................................#00221 Bullet Tooth Holder......................................................#002235/8"-11 Carriage Bolt 1-1/2" Long ..............................#400005/8"-11 Lock Nut..........................................................#40001
CONSTRUCTION AUGER PILOT POINTSFishtail Point................................................................#00203Hardfaced Fishtail Point ..............................................#00210 Carbide Fishtail Point ..................................................#00211 4-1/2” Auger Fishtail Point ..........................................#00204Square Drive Lug ........................................................#00105 4" Auger Drive Lug......................................................#00106 CDR Rock Auger Pilot , 1-3/4” Square Shank ..........#00236CDR Rock Auger Pilot , 2-3/8” API ............................#00222CDR Rock Auger Bullet Tooth ....................................#00221 CRB Rock Auger Fishtail Point ..................................#00239
ACCESSORIES Weights for Down-Pressure Mounting Bracket,100 lbs. each ....................................................#50202
PHONE 1-866-458-0008 • FAX 260-456-6868 • WEB premierattach.com
2707 Lofty Drive
Fort Wayne, IN 46808
Toll Free: 1-866-458-0008
Phone: 260-456-8518
Fax: 260-456-6868
premierattach.com