1 Table of Contents Entertainment TV Kits Page 2……………….Matrix MYE TV Kit Page 3……………….Matrix MYE TV - R3x-02 Bracket / Controller Kit Page 4……………….Matrix MYE TV - U/A/E3x(c)-02 Bracket / Controller Kit Page 5……………….Matrix MYE TV - H3x-02 Bracket / Controller Kit Page 6……………….Matrix MYE TV - S3x-02 Bracket / Controller Kit Page 7……………….Matrix MYE TV - T5x-02 Bracket / Controller Kit Page 8……………….Matrix MYE TV - T5x-03 Bracket / Controller Kit Page 9……………….Matrix MYE TV - T7x-01 Bracket / Controller Kit Page 10……………...Matrix MYE TV - T1x / T1xe Controller Bracket Kit (with stand) Page 11……………...Matrix MYE TV - T3x / T3xe Controller Bracket Kit (with stand) Page 12..…………….Interim MYE TV Components Page 13..…………….15” Television Kit Page 14 ……………..Daisy Chain Adaptor Cord Page 15……………...Headphone Jack - Matrix TV Control Page 16………………15” or 7” – New Telescoping TV Stand Page 17………………15” or 7” – Old Telescoping TV Stand Page 18………………15” T3x TV Controller Bracket Kit Page 19………………15” T3x TV Bracket Kit Page 20………………15” T5x TV Controller Bracket Kit Page 21………………15” T5x TV Bracket Kit Page 22………………15” Premium Treadmills TV Bracket Kit Page 23……………....15” H5x TV Bracket Kit Page 24………………15” R5x TV Bracket Kit Page 25………………15” U5x /E5xc /A5x /I5x TV Bracket Kit Page 26………………15” E5x TV Bracket Kit Page 27………………15” Stepper TV Bracket Kit Page 28………………7” Television Kit Page 29………………7” T3x TV Bracket Kit Page 30………………7” T5x TV Bracket Kit Page 31………………7” Bike or Elliptical Bracket Kit Page 32………………TV Remote Overlays Page 33 Interim MYE TV Kit Information Page 35………………Interim MYE TV T5x-02 TV Bracket Kit Page 36........................Interim MYE TV H3x / H5x-06 TV Bracket Kit Page 37………………Interim MYE TV R3x / R5x-06 TV Bracket Kit Page 38………………Interim MYE TV U3x / U5x-06 TV Bracket Kit Page 39........................Interim MYE TV Control HP Jack Replacement Page 40………………BV / Sharp T4 / T5 / T5x Replacement Parts Page 41………………BV / Sharp T3x Replacement Parts Page 42………………BV / Sharp E5 / E5x Replacement Parts Page 43………………BV / Sharp R5 / U5/R5x /U5x Replacement Parts Page 44………………BV / Sharp Orbit Controller Cords Page 45………………BV / Sharp Power Adaptor Page 46………………BV TV Controller Headphone Jack Replacement Page 47………………TV Microchip and TV Board Info
48
Embed
Table of Contents Entertainment TV Kits - Johnson Fitness · Table of Contents Entertainment TV Kits ... BV / Sharp T4 / T5 / T5x Replacement Parts ... MATRIX MYE TV T5x-02 TV Bracket
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
1
Table of Contents
Entertainment TV Kits
Page 2……………….Matrix MYE TV Kit
Page 3……………….Matrix MYE TV - R3x-02 Bracket / Controller Kit
Page 4……………….Matrix MYE TV - U/A/E3x(c)-02 Bracket / Controller Kit
Page 5……………….Matrix MYE TV - H3x-02 Bracket / Controller Kit
Page 6……………….Matrix MYE TV - S3x-02 Bracket / Controller Kit
Page 7……………….Matrix MYE TV - T5x-02 Bracket / Controller Kit
Page 8……………….Matrix MYE TV - T5x-03 Bracket / Controller Kit
Page 9……………….Matrix MYE TV - T7x-01 Bracket / Controller Kit
Page 10……………...Matrix MYE TV - T1x / T1xe Controller Bracket Kit (with stand)
Page 11……………...Matrix MYE TV - T3x / T3xe Controller Bracket Kit (with stand)
Page 12..…………….Interim MYE TV Components
Page 13..…………….15” Television Kit
Page 14 ……………..Daisy Chain Adaptor Cord
Page 15……………...Headphone Jack - Matrix TV Control
Page 16………………15” or 7” – New Telescoping TV Stand
Page 17………………15” or 7” – Old Telescoping TV Stand
Page 18………………15” T3x TV Controller Bracket Kit
Page 19………………15” T3x TV Bracket Kit
Page 20………………15” T5x TV Controller Bracket Kit
Page 21………………15” T5x TV Bracket Kit
Page 22………………15” Premium Treadmills TV Bracket Kit
Page 23……………....15” H5x TV Bracket Kit
Page 24………………15” R5x TV Bracket Kit
Page 25………………15” U5x /E5xc /A5x /I5x TV Bracket Kit
Page 26………………15” E5x TV Bracket Kit
Page 27………………15” Stepper TV Bracket Kit
Page 28………………7” Television Kit
Page 29………………7” T3x TV Bracket Kit
Page 30………………7” T5x TV Bracket Kit
Page 31………………7” Bike or Elliptical Bracket Kit
Page 32………………TV Remote Overlays
Page 33 Interim MYE TV Kit Information
Page 35………………Interim MYE TV T5x-02 TV Bracket Kit
Page 36........................Interim MYE TV H3x / H5x-06 TV Bracket Kit
Page 37………………Interim MYE TV R3x / R5x-06 TV Bracket Kit
Page 38………………Interim MYE TV U3x / U5x-06 TV Bracket Kit
Page 39........................Interim MYE TV Control HP Jack Replacement
TV01 004370-00 M5 Philips Screw for Controller Mount 2
TV01 022311-A Spring Pin 3x10mm 1
26
15” E5x TV Bracket Kit – 060107-AA
REF # SAP # Description Quantity
E01 018141-AE TV Mounting Bracket Left 1
E02 015267-AE TV Mounting Bracket Right 1
E03 060104-AA TV Control Mount Bracket 1
E04 018286-AC E5X TV Bracket 1
E05 028601-BR TV Signal Coax Wire 1
E06 039282-A Power Connecting Wire 1
E07 058861-A Controller Signal Wire 1
Hardware Bag
Bag 004762-00 Hex Screw M8 1
Bag 005005-00 Lock washer M8 1
Bag 004926-00 Nylok Nut M8 1
Bag 065248-A Exchange SC-2V Coax Connector 1
Bag 004355-00 Screws M4 x 7 x 10 8
Bag 004370-00 M5 Philips Screw for Controller Mount 2
Bag 022311-A Spring Pin 3x10mm 1
TV01 038044-A Pigtail Adapter 1
Bag 004479-00 Screw Hex M8 1
27
E07
E03 E04
Z01
E05
E02 E01
E06
E08
15” Stepper TV Bracket Kit – 0000083596
REF # SAP # Description Quantity
E01 068841-AA S5X TV Control Mount Bracket 1
E02 001399-BA Mounting Bracket Rubber Gasket 1
E03 015267-AE TV Mounting Bracket Right 1
E04 018141-AE TV Mounting Bracket Left 1
E05 060245-C TV Power Wire 1
E06 060461-B TV Signal Coax Wire 1
E07 0000081378 TV CTRL Wire 1
E08 068112-AA TV Bracket 1
Hardware Bag;
Z01 065248-A Exchange SC-2V Coax Connector 1
Z01 004762-00 Hex Screw M8 1
Z01 005005-00 Lock washer M8 1
Z01 004926-00 Nylok Nut M8 1
Z01 004355-00 Screws M4 x 7 x 10 4
28
7” TV Kit – MTV0001-00 (This is listed in the system as a
Finished Good)
REF # SAP # Description Quantity
AB1 079987 7” Television 1
AC1 080991 TV Back Cover 1
AZ1 084568 Screw Kit TV100 4
PO1 086352 Power Cord Adapter 1
1000095747 Headphone Jack 1
080990 Headphone Jack Cover 1
004613-00 Headphone Jack Cover Screws 2
034570-A TV Manual 1
29
E01
E02
Z01
7” T3x TV Bracket Kit – 085942
REF # SAP # Description Quantity
E01 085943 Console Mast for 7” 1
Z01 005046-AC Washers Flat 8.4x15.5x2.0 4
Z01 004748-00 Screw Hex M8 4
E02 001129-B End Cap 1
30
E01
E02
Z01
7” T5x TV Bracket Kit – 085926
REF # SAP # Description Quantity
E01 085927 Console Mast for 7” TV 1
E02 004820-A Screw Hex M5 4
E02 005080-00 Washers Flat 5.2x13.0x1.5 4
E03 001129-B End Cap 1
31
E05 E06
E03
E02 E01
E04
7” Bike or Elliptical TV Bracket Kit – 079991
REF # SAP # Description Quantity
E01 085876 Lower Right Connecting Plate 1
E02 085877 Lower Left Connecting Plate 1
E03 004817-A Screw Hex M6 2
E03 005077-00 Washers Flat 6.2 x 12.0 2
E03 004883-00 Nut M6 2
E04 079992 Console Mast 1
E05 081142 Power Wire 1
E06 082412 Coax Signal Wire 1
32
TV REMOTE OVERLAYS
OLD REMOTE (Picture on Left) 056121-B – Overlay part # 0000081833
NEW REMOTE (Picture on Right) 0000093108 – Overlay part # 0000093109
33
Interim Mye TV Bracket Kit and Equipment Information The Interim Mye TV will fit on all of the following equipment provided all instructions are
followed (that relate to the notes below). The Interim Mye TV will only function with the
controller that is sold with it as a kit (it is not compatible with Matrix controllers).
NOTE: The T7X and T7xe treadmills should not use the Interim Mye TV. It will cause too
much confusion with embedded controls for the 7” screen, and an external control for the Interim
Mye TV. It is suggested that these treadmills use the 7” embedded screen only until the Matrix
TV can be added on later.
1) T5X-02 Treadmill
a. Uses the existing bracket for mounting a TV with an added hole drilled for the TV
power plug clearance (Figure A).
b. With the Mye TV, the TV overlay that works with Matrix TVs will not be used.
Instead the Mye TV controller will mount to the handlebar to control TV
functions (Figure B). Mount the Mye TV controller to the handlebar using the
hardware provided with the controller.
c. Plug in the Mye TV controller and coax cable to the Mye TV prior to mounting
the TV to the bracket.
Figure A Figure B
2) Elliptical products (E5XC, A5X, I5X)
a. Uses the existing bracket kit for mounting the TV and the controller with a few
modifications:
i. The Matrix controller bracket is removed from the kit (not needed)
ii. The existing controller wire is removed from the bracket kit
b. The Mye TV controller mounts onto the handlebar along side the console using
the mounting hardware that comes with the controller (Figure C).
Figure C
34
3) Stepper (S5X)
a. Uses the existing bracket kit for mounting the TV and the controller with a few
modifications:
i. The Matrix controller bracket is removed from the kit (not needed)
ii. The existing controller wire is removed from the bracket kit
b. The Mye TV controller mounts onto the side rail along side the console using the
mounting hardware that comes with the controller (Figure D).
Figure D
4) Bikes (U5X-06, H5X-06, R5X-06)
a. Uses the existing bracket kit for mounting the TV and the controller with a few
modifications:
i. The Matrix controller bracket is bent to a steeper angle for clearance
ii. The existing controller wire is removed from the bracket kit
iii. 2 screws are added for mounting the controller to our bracket
b. The Mye TV controller mounts onto the modified Matrix controller bracket using
the 2 screws added to the kit from our stock (Figure E).
Figure E
35
Z01
Z02
Z03 Z04
Z05
Z06
Interim MYE TV T5x-02 TV Bracket Kit – ZMS3000408
REF # SAP # Description Quantity
Z01 0000089709 TV Bracket 1
Z02 0000086157 TV Coax Signal Wire 1
Z03 0000085775 TV Power Wire 1
Z04 004355-00 Screw M4 x .7P x 10L 4
Z05 0000089835 Washer 8.35 x 12.8 x 0.8 x 1.3 4
Z06 004745-00 Screw;M8x1.25x55L 4
36
Z01
Z02 Z03 Z04
Z05 Z06
Z07 Z08 Z09
Z10 Z11 Z12
Interim MYE TV H3x / H5x-06 Bike TV Bracket Kit – ZMS3000406
REF # SAP # Description Quantity
Z01 028887-AA TV Bracket 1
Z02 004762-00 Hex Screw M8 1
Z03 004926-00 Nylok Nut M8 1
Z04 005005-00 Lock Washer M8 1
Z05 065248-A Coax Connector 1
Z06 022311-A Spring Pin 1
Z07 004355-00 Screw M4 x .7P x 10L 10
Z08 004446-00 Screw M4 x .7P x 16L 2
Z09 004923-00 Nylok Nut M4 2
Z10 Special Request
for Interim Mye
TV Control Mounting Bracket
(Mye TV)
1
Z10 056117-AA TV Control Mounting Bracket
(Matrix Mye TV)
1
Z11 018141-AE TV Mounting Bracket Left 1
Z12 015267-AE TV Mounting Bracket Right 1
37
Z01
Z02 Z03 Z04
Z05 Z06
Z07 Z08 Z09
Z10 Z11 Z12
Interim MYE TV R3x / R5x-06 Bike TV Bracket Kit – ZMS3000407
REF # SAP # Description Quantity
Z01 037739-AA TV Bracket 1
Z02 004762-00 Hex Screw M8 1
Z03 004926-00 Nylok Nut M8 1
Z04 005005-00 Lock Washer M8 1
Z05 065248-A Coax Connector 1
Z06 022311-A Spring Pin 1
Z07 004355-00 Screw M4 x .7P x 10L 10
Z08 004446-00 Screw M4 x .7P x 16L 2
Z09 004923-00 Nylok Nut M4 2
Z10 Special Request TV Control Mounting Bracket (Mye
TV)
1
Z10 056117-AA TV Control Mounting Bracket
(Matrix Mye TV)
1
Z11 018141-AE TV Mounting Bracket Left 1
Z12 015267-AE TV Mounting Bracket Right 1
38
Z01
Z02 Z03 Z04
Z05 Z06
Z07 Z08 Z09
Z10 Z11 Z12
Interim MYE TV U3x / U5x-06 TV Bracket Kit – ZMS3000409
REF # SAP # Description Quantity
Z01 034537-AA TV Bracket 1
Z02 004762-00 Hex Screw M8 1
Z03 004926-00 Nylok Nut M8 1
Z04 005005-00 Lock Washer M8 1
Z05 065248-A Coax Connector 1
Z06 022311-A Spring Pin 1
Z07 004355-00 Screw M4 x .7P x 10L 10
Z08 004446-00 Screw M4 x .7P x 16L 2
Z09 004923-00 Nylok Nut M4 2
Z10 Special Request
for Interim
TV Control Mounting Bracket
(Mye TV)
1
Z10 056117-AA TV Control Mounting Bracket
(Matrix Mye Controller)
1
Z11 018141-AE TV Mounting Bracket Left 1
Z12 015267-AE TV Mounting Bracket Right 1
39
Replacement headphone jack for the MYE TV controller
ZMS3000411.
40
E01 Z01
E02 Z02
Z03
E03
BV / SHARP TV - T4/T5/T5x Treadmill TV Controller
Replacement Parts
REF # SAP# DESCRIPTION Quantity
E01 0000082631 Controller Signal Wire Cable 1
E02 060106-AA T4-T5-T5X TV Control Mount Bracket 1
E03 056121-B TV Controller with 2 screws ** 1
Z01 067957-A Screw Hex M5 2
Z02 020374-00 Nut Hex M5 2
Z03 005022-A Washer Spring 5.2x10.0x1.0 2
**Controller needs to be specially programmed by SVC before shipping
for BV TV’s. To turn on Close Captioning, Hold ENTER than hit 1.
Repeat this procedure to turn off the Close Captioning.
41
E01
Z01
Z02
Z03
E02
E03
BV / SHARP TV – T3x Treadmill TV Controller
Replacement Parts
REF # SAP # Description Quantity
E01 0000082631 Controller Signal Wire Cable 1
E02 060105-AA T3X TV Control Mounting Bracket 1
E03 056121-B TV Controller with 2 screws ** 1
Z01 059633-00 Screw Hex M5 2
Z02 020374-00 Nut Hex M5 2
Z03 005022-A Washer Spring 5.2x10.0x1.0 2
**Controller needs to be specially programmed by SVC before shipping
for BV TV’s. To turn on Close Captioning, Hold ENTER than hit 1.
Repeat this procedure to turn off the Close Captioning.
42
E02
E01
E03
BV / SHARP TV – E5/E5x Elliptical TV Controller Replacement Parts
REF # SAP # Description Quantity
E01 060104-AA E5X TV Control Mounting Bracket 1
E02 0000082631 Controller Signal Wire Cable 1
E03 056121-B TV Controller with 2 screws** 1
**Controller needs to be specially programmed by SVC before shipping
for BV TV’s. To turn on Close Captioning, Hold ENTER than hit 1.
Repeat this procedure to turn off the Close Captioning.
***E5 and E5X use the screws that are for existing BV bracket, should
be on unit.
43
E02
E01
E03
BV / SHARP TV – R5/R5x/U5/U5x Bikes TV Controller
Replacement Parts
REF # SAP # Description Quantity
E01 0000086590 R5–U5–R5X–U5X TV Control Mounting
Bracket
1
E02 0000082631 TV Controller Signal Wire Cable 1
E03 056121-B TV Controller with 2 screws** 1
**Controller needs to be specially programmed by SVC before shipping
for BV TV’s. To turn on Close Captioning, Hold ENTER than hit 1.
Repeat this procedure to turn off the Close Captioning.
***Bikes use the screws that are for existing BV bracket, should be on
the bike.
44
BV / SHARP TV – Orbit Controller Cord
REF # SAP # Description Quantity
ZMS3000099 9’ BV/Orbit Controller Cord 1
ZMS3000098 20’ BV/Orbit Controller Cord 1
45
Z02
Z01
BV / SHARP TV – Power Adaptors
REF # SAP # Description Quantity
Z01 002729-E TV Power Wire 1
Z02 038044-A Pigtail Adapter 1
46
Replacement Headphone Jack for BV TV Controller –
ZMS300101
47
TV microchip and TV board Inventory 2/06/2008 TV CHIP PART # 029042-A
V2.2 PN 22 (306) works with 1st version boards to
fix power reset issue
V2.2 PN 14 (92) works with 2nd version boards to
fix power reset issue
V2.3 PN14 (54) works with 2nd version boards to
fix the frequency issue.
V2.3A PN14 (50) works with 3rd version (newest)
boards to fix the frequency issue
Boards with Microchips:
V2.21 PN14 (6) 3rd version boards from newest
TV’s
V2.3 PN14 (51) 2nd version boards will work to
fix frequency problem on any
TV’s
2.2 or 2.21 chips are o.k. and fix the power problem (need to reset power to make
the tv turn on)
2.3 or 2.3A chips are for frequency problems (a few black and white channels
are all that come in)
3 Different boards exist:
1) Oldest boards 1st version --- work with PN 22 style chips
2) Middle boards 2nd version ---work with older PN 14 style chips
3) Newest boards 3rd version ---work with newer PN14 style chips (2.21 or
2.3A only)
48
Programming info for Matrix Controllers 1. To enter setup mode, press and hold the ENTER and LAST keys for 5 seconds. The green
LED will blink once a second indicating the remote is in setup mode. The user may press the
POWER key at any time to leave the setup mode.
2. The following table represents the possible key selections from the setup mode:
TV selection mode 1
The red LED will blink once every second The following keys will set the TV selection
1 RS-232 2 Simulated IR codes 0 No selection (cancel)
After the selection, the remote automatically returns to the run mode
Default channel setup mode (sets the channel when the TV is powered on) 2
The red LED will blink once every two seconds Enter two digits followed by the ENTER key ENTER returns the remote to the run mode Notes RESET clears the entry if pressed before the ENTER key Channel “00” disables this feature If more than two digits are pressed, the following digits wrap
Channel remap setup mode (allows configuration of the TV channel map) 3
The red LED will blink once every three seconds Enter two digits followed by the ENTER key to enter the channel to be remapped The green LED will blink indicating the channel was accepted Enter two digits followed by the ENTER key to enter the remap channel The green LED will blink two times indicating the channel was remapped Repeat the above steps to remap different channels Press the POWER key to return to run mode
Enable channel remap mode 4
Turn on the channel remap mode The red LED will blink two times indicating the mode was enabled After the selection, the remote automatically returns to the run mode Notes The remap mode prevents the channels from being sent until two digits are pressed sequentially (within 5 seconds). After 5 seconds, the remote waits for the first digit again.
Disable channel remap mode 5
Turn off the channel remap mode The red LED will blink two times indicating the mode was disabled After the selection, the remote automatically returns to the run mode
0 Leave the setup mode and return to run mode
Notes: - After power up the TV with the remote with the default channel enabled, there is a three
second TV warm up delay before the channel is sent to the TV. For those three seconds, the
remote will be unresponsive.
- There is only one way communication in the Broadcast Vision mode. Therefore, it is possible
for the power state to become out of sync.
- A new state indicator was added to the remote where the red and green LED’s light up
together producing a yellow. This state can be seen only on Matrix TV’s and represents a
communication timeout (the remote asks for the power state once per second).