Table of ContentsWho We Are 01
Casing Heads 02
Casing Spools 03
Tubing Spools 04
Threaded Tubing Heads 05
Multibowl Wellhead System 06
Bottom Hole Test Adapters 07
Tubing Head Adapters 08
Secondary Seals 09
Casing Hangers 10
Tubing Hangers 11
Studded Crosses and Tees 12
Gate Valves 13
Slab Gate Valves 14
Expanding Gate Valves 15
Consumables 16
Table of ContentsWho We Are 01
Casing Heads 02
Casing Spools 03
Tubing Spools 04
Threaded Tubing Heads 05
Multibowl Wellhead System 06
Bottom Hole Test Adapters 07
Tubing Head Adapters 08
Secondary Seals 09
Casing Hangers 10
Tubing Hangers 11
Studded Crosses and Tees 12
Gate Valves 13
Slab Gate Valves 14
Expanding Gate Valves 15
Consumables 16
Who we are
Apache Pressure Products is a leading distributor of oilfield and industrial equipment. Our line of API 6A wellhead equipment is made to the highest quality standards and has been field tested time and time again. Our sales specialists will assist you on your purchase whether you are looking for just one gate valve or an entire multi-bowl system with custom design elements and modifications.
Apache Pressure Products utilizes a network of qualified manufacturers, all whom must complete a quality audit process with satisfactory rating to be considered. We alsoconduct an annual quality inspection of eachsupplier to ensure that the level of quality is maintained.
We leverage two decades worth of contracting manufacturing experience in the selection and qualification of our vendors. Our onsite representatives are on call and ready at any given time to inspect and monitor manufacturing and testing of our products. When the products arrive in the US they are further scrutinized for material and workmanship defects at our quality control center. We ensure that every piece of equipment meets and surpasses all specification requirements.
At our Manvel warehouse we keep an extensive stock of wellhead equipment as well as vast selections of valves and fittings for all of your drilling and production needs. Please give us a call today and see what we can offer you. Our mission is to provide unsurpassed value to our customers through constant improvement and innovation.
1
C-22/29 Casing Heads
Apache Casing heads have a straight bore bowl design with 45 landing shoulders whichprevents damage to sealing areas by drillingtools and eliminates bowl protector wedgingissues when pressure is applied.
Ordering Options
Overview
OutletsLine Pipe OutletsSide Studded Outlets
Lock ScrewsBP pins (2) are supplied upon request
Bottom ConnectionsSlip-on-weldSlip-on-weld + O’ringThreadedSure Lock
API 6A speci�cationsPSL 1, PSL 2 (on request), PR 1, DD
Casing SizeTop
FlangeWorking
Pressure (psi)A B C
Weight (lbs)
2,000 17.25 8.00 10.88 3403,000 17.25 8.00 10.88 4605,000 17.50 8.00 10.88 7102,000 17.25 9.00 10.88 3203,000 17.25 9.00 10.88 4305,000 17.50 9.00 10.88 6802,000 17.25 10.00 10.88 3003,000 17.25 10.00 10.88 4105,000 17.50 10.00 10.88 5602,000 17.50 11.00 13.50 4693,000 17.50 11.00 13.50 5875,000 17.50 11.00 13.50 -3,000 17.50 11.00 16.62 -5,000 18.00 11.00 16.62 -2,000 17.50 12.56 13.50 3803,000 17.50 12.56 13.50 5005,000 17.50 12.56 13.50 7503,000 17.50 12.56 16.62 -5,000 18.00 12.56 16.62 -2,000 17.50 15.37 16.62 9803,000 17.50 15.37 16.62 9955,000 18.00 15.37 16.62 -
21-1/4" 2,000 19.00 19.12 20.12 121020-3/4" 3,000 19.00 19.12 20.12 1331
16-3/4"
20"
13-5/8"
16-3/4"
13-3/8"13-5/8"
16-3/4"
16"
11-3/4"
8-5/8" 11"
9-5/8" 11"
10-3/4" 11"
Lock ScrewsBP pins (2) are supplied upon request
Bottom PrepPE/BG Bottom“OO” BottomDobule “P” Seal Bottom
2
Apache C-22 Casing Spools have a straight borebowl design with 45 landing shoulders. Bottom prep can be standard PE/BG, “OO” bottom (below 5,000 psi applications) or double “P” seal bottom.
C-29 Casing Spools are based on the same designas the C-22 with a larger bowl. Which permits the acceptance of the C-29 Casing Hanger with largerload capacity.
Ordering Options
OutletsLine Pipe OutletsSide Studded Outlets
API 6A speci�cationsPSL 1, PSL 2, PR 1, DD
A B C2,000 23.12 10.00 10.88 5703,000 23.12 10.00 10.88 6003,000 23.12 10.00 10.88 7105,000 26.25 10.00 10.88 -5,000 26.25 10.00 10.88 -
10,000 31.25 10.00 10.88 -2,000 23.12 10.00 10.88 -3,000 23.12 10.00 10.88 7402,000 23.12 12.50 13.50 -3,000 23.12 12.50 13.50 -3,000 26.25 10.00 10.88 7855,000 26.25 10.00 10.88 11753,000 26.75 12.50 13.50 -5,000 26.75 12.50 13.50 -5,000 29.38 10.00 10.88 1595
10,000 30.25 10.00 10.88 19485,000 30.25 12.50 13.50 -
10,000 30.25 12.50 13.50 -11" 10,000 30.88 10.00 10.88 2950
13-5/8" 10,000 32.62 12.50 13.50 39002,000 23.12 10.00 10.88 -3,000 23.12 10.00 10.88 -2,000 23.12 12.50 13.50 -3,000 23.12 12.50 13.50 -3,000 23.12 10.00 10.88 12005,000 24.12 10.00 10.88 15183,000 24.12 12.50 13.50 17255,000 25.00 12.50 13.50 19505,000 30.50 10.00 10.88 -
10,000 29.75 10.00 10.88 32355,000 29.75 12.50 13.50 -
10,000 30.50 12.50 13.50 324313-5/8" 10,000 32.62 12.50 13.50 -16-3/4" 10,000 33.00 15.37 16.62 -
2,000 25.25 12.50 13.50 -3,000 25.25 12.50 13.50 2063.002,000 25.25 15.37 16.62 -3,000 25.25 15.37 16.62 -3,000 25.25 12.50 13.50 19605,000 27.00 12.50 13.50 2450.00
20-3/4" 3,000 27.00 19.12 20.12 -21-1/4" 5,000 29.25 19.12 20.12 -
5,000 27.00 12.50 13.50 -10,000 29.25 12.50 13.50 -5,000 30.75 15.37 16.62 -
10,000 32.25 15.37 16.62 -
20-3/4" 3,00013-5/8"
21-1/4" 5,00013-5/8"
16-3/4"
13-5/8"
10,000
21-1/4" 2,00013-5/8"
16-3/4"
10,000
16-3/4"
2,00011"
13-5/8"
3,00011"
13-5/8"
5,00011"
2,00011"
13-5/8"
13-5/8"
11"
13-5/8"
11"
13-5/8"
3,000
5,000
Dimensions (inch)Weight (lbs)
11"
2,000 11"
3,000 11"
5,000 11"
Bottom Flange (wp in psi) Top Flange (wp in psi)
Overview
Casing Spool
Lock ScrewsBP pins (2) are supplied upon request
Bottom PrepPE/BG Bottom“OO” BottomDobule “P” Seal Bottom
3
Tubing Spools
OutletsLine Pipe OutletsSide Studded Outlets
Lock ScrewsBP pins are included
Bottom PrepPE/BG bottomHPE bottom
API 6A speci�cationsPSL 1 or PSL 2, PR 1, DD-NL
Apache Tubing Spools have a straight bore bowl design with 45 landing shoulders which prevents damage to sealing areas by drilling tools and eliminates bowl protector wedging issues when pressure is applied. Accepts all TC style tubing hangers, can be converted from single to multiple completions.
Overview
Ordering OptionsA B C
2,000 7-1/16“ 3,000 23.12 6.76 7.00 5503,000 23.12 6.76 7.00 6005,000 26.25 6.76 7.00 6703,000 26.25 8.25 8.75 7505,000 26.25 8.25 8.75 8005,000 26.25 6.76 7.00 880
10,000 31.25 6.76 7.00 8569” 10,000 31.25 8.25 8.75 1249
10,000 32.62 6.76 7.00 131815,000 33.25 6.76 7.00 -
9“ 10,000 32.62 8.25 8.75 17007-1/16” 3,000 23.12 6.76 7.00 445
9“ 3,000 23.12 8.25 8.75 6553,000 26.25 6.76 7.00 6705,000 26.25 6.76 7.00 8053,000 26.25 8.25 8.75 7055,000 26.75 8.25 8.75 715
5,000 11” 10,000 30.25 10.00 10.88 1754
10,0007-1/16”
13-5/8"
2,000
3,0007-1/16”
9“
Bottom Flange (wp in psi) Top Flange (wp in psi)Dimensions (inch) Weight
(lbs)
11"
3,0007-1/16”
9“
5,0007-1/16“
4
Apache Threaded Tubing Heads has a TCM top andthreaded bottom connection.
All Tubing Heads are supplied with 4 BP Lock pins and comes with 2” LP outlets.
Tubing Heads are supplied up to 5,000 psi.
Overview
A B C3,000 4 1/2" 8rd 2 X 2" LP 14.000 7.000 7.126 1033,000 5 1/2" 8rd 2 X 2" LP 14.000 7.000 7.126 1015,000 4 1/2" 8rd 2 X 2" LP 15.945 7.000 7.126 1085,000 5 1/2" 8rd 2 X 2" LP 15.945 7.000 7.126 104
Wt (lbs)
7 1/16"
Bottom OutletDimensions (inches)
Flange (w orking pressure in psi)
Threaded Tubing Heads
5
Multibowl Wellhead System
The multi-bowl system allows the support of multiple casing strings therefore reducing installation time. Our multi-bowl wellhead system is configurable according to your specifications. Apache's multi-bowl system can significantly reduce your operational cost and improve safety at the same time.
Overview
Casing SpoolStraightbore design casing spool incorporates two sets of ET style lockpins. Supplied with two Side-Studded Outlets
Packo� Support BushingPack-off support busing lands on the mandrel hanger and suspend the intermediate casing string.
Casing HangerMulti-bowl system utilizes a fluted mandrel casing hanger to allow cement returns.
Tubing HangerMulit-bowl system uses traditional TCM Tubing Hangers. Tubing hanger lands on the packoff support bushing. Lockdown pins from the upper casing spool locks the tubing hangers in place.
Casing HeadApache Multi-bowl casing head uses a straight-bore desgin with 45 landing shoulders. Casing heads are supplied with eight lockpins to support the packoff bushing.
o
6
Flange Size Bore A B C Lift Thread Wt (lbs)
2-1/16" 5,000 psi 2 1/16" 7.79" 8.46" 2.07" 2 3/8" EUE 52
2-9/16" 5,000 psi 2 9/16" 7.79" 9.65" 2.56" 2 7/8" EUE 60
Overview
Bottom hole test adapters or Treecaps allow a flexiblemeans of entry into the tubing bore. Apache tree caps are constructed with one piece forging and is designedto use where a integral flanged unit is preferred.
Bottom Hole Test Adapters
7
Overview
Apache Pressure Products offers a wide selection of tubing head adapters for transition from the wellhead to the tree. Adapters are designed for mulitiple types of heads and hangers. Comes in threaded, flanged or studded connections.
B1 Theaded Adapters
Flanged adapter with male externally threaded top connection and female bottom internally threaded both with 8rd EUE threads.
B2P Adapters
Flanged adapter with studded top and 8rd EUE threaded bottoms.
A5P Adapters
Flanged adapter with studded top and bottom pocket of 2” or 2.5”. Available with 1/2” NPT test port.
Tubing Head Adapters
Flange Size Threaded Top Bottom Thread Wt. (lbs)7-1/16" 2,000 2-3/8" UPTBG 2-3/8" UPTBG 1177-1/16" 2,000 2-7/8" UPTBG 2-7/8" UPTBG 1107-1/16" 3,000 2-3/8" UPTBG 2-3/8" UPTBG 1427-1/16" 3,000 2-7/8" UPTBG 2-7/8" UPTBG 1357-1/16" 3,000 3-1/2" UPTBG 3-1/2" UPTBG 1457-1/16" 5,000 2-3/8" UPTBG 2-3/8" UPTBG 2107-1/16" 5,000 2-7/8" UPTBG 2-7/8" UPTBG 1957-1/16" 5,000 3-1/2" UPTBG 3-1/2" UPTBG 175
Flange Size Studded Top Bottom Thread Wt. (lbs)7-1/16" 2,000 2-1/16" 2,000 2-3/8" UPTBG 1077-1/16" 3,000 2-1/16" 5,000 2-3/8" UPTBG 1147-1/16" 3,000 2-9/16" 5,000 2-7/8" UPTBG 1707-1/16" 3,000 3-1/8" 5,000 3-1/2" UPTBG 2257-1/16" 5,000 2-1/16" 5,000 2-3/8" UPTBG 1607-1/16" 5,000 2-9/16" 5,000 2-7/8" UPTBG 2307-1/16" 5,000 3-1/8" 5,000 3-1/2" UPTBG 330
Flange Size Studded Top Bottom Pocket Wt. (lbs)7-1/16" 3,000 2-1/16" 5,000 2" 1247-1/16" 3,000 2-9/16" 5,000 2-1/2" 1177-1/16" 5,000 2-1/16" 5,000 2" 1787-1/16" 5,000 2-9/16" 5,000 2-1/2" 175
7-1/16" 10,000 2-1/16" 10,000 2" 3187-1/16" 10,000 2-9/16" 10,000 2-1/2" 316
8
Secondary Seals
Overview
Secondary seals are inserted in the bottom of a casing or tubing spool. It is used to seal around the productioncasing. Apache Pressure Products carries PE and HPE secondary seals.
PE Seals PE seal is inserted in the bottom of a casing or tubing spool and retained with a snap wire. The seal is energized when the spool is installed over the casing stub and the flanged connection is made up.
HPE Seals HPE seal is inserted into a HPE bottom preparationof most 10,000 - 15,000 psi casing or tubing spools.The bottom plate is threaded into the bottom prepand is designed for high pressure applications
7" 9" 10-3/4"4-1/2" 5,000 psi - 15,000 psi 5,000 psi - 15,000 psi
5" 5,000 psi - 15,000 psi 5,000 psi - 15,000 psi5-1/2" 5,000 psi - 15,000 psi 5,000 psi - 15,000 psi6-5/8" 5,000 psi - 15,000 psi
7" 5,000 psi - 15,000 psi7-5/8" 5,000 psi - 15,000 psi8-5/8" 5,000 psi - 15,000 psi9-5/8" 5,000 psi - 15,000 psi
Casing SizeSpool Nominal Bottom Prep
9
C-22/29
Apache C-22 wrap around casing hangers incorporatespack off, slip bowl and slips. Packoff seals the annulusbelow the slips when casing load is applied. The C-22 Hanger’s controlled fricition reduces casing deflection.C-22 casing hangers are easy to install and economical.
Nominal Bowl Size Casing Size
4-1/2"5"
5-1/2"7"
7-5/8"5-1/2"
7"7-5/8"8-5/8"9-5/8"9-5/8"
10-3/4"11-7/8"13-3/8"
16"
11"
13-5/8"
16-3/4"
20"
Overview
Apache Pressure Products offers a wide selection ofCasing Hangers. The casing Hanger lands inside of the casing head and is responsible for hanging the casing string. We supply both slip and mandrel style casing hangers.
Casing Hangers
10
TC1W Tubing Hanger
TC1W Wrap around hanger is designed toseal off the casing annulus at the same time supporting the tubing string and nipplingup the christmas tree without the BOP.
TC1A Tubing Hanger
TC1A is a threaded tubing hanger. The hangeris energized by the weight of the tubing and tightening the lock screws in the tubing headflange.
TC1A-EN Tubing Hanger
TC1A-EN is an extended neck TC1A hanger with packing rings that confine all of the well pressureand fluids to the tubing bore. TC1A-EN hangerscan be modified to include connections and portsfor the hydraulic ontrol line in the event of hydraulically controlled down-hole safety valve installation.
Size Wt (lbs)
7 1/16" X 2 3/8" O.D. 70
7 1/16" X 2 7/8" O.D. 70
Size Wt (lbs)
7 1/16" X 2 3/8" O.D. 68
7 1/16" X 2 7/8" O.D. 68
Size Wt (lbs)
7 1/16" X 2 3/8" O.D. 77
7 1/16" X 2 7/8" O.D. 70
Overview
Apache Pressure Products offers a wide selection oftubing hangers. Tubing hangers suspends the productiontubing and provide seal off of the casing annulus.
11
Studded Crosses and Tees
Overview
Apache Pressure Products offers a wide selection of crosses and tees in different sizes and pressures.
A, inch B, inch C, inch D, inch TEE Cross2-1/16"2,000 2-1/16"2,000 3.50 3.50 2.06 2.06 95 852-1/16"5,000 2-1/16"5,000 4.50 4.50 2.06 2.06 160 1612-9/16"2,000 2-9/16"2,000 4.50 4.50 2.56 2.56 125 1192-9/16"5,000 2-1/16"5,000 4.50 5.00 2.56 2.06 375 2552-9/16"5,000 2-9/16"5,000 5.00 5.00 2.56 2.56 350 2253-1/8"2,000 3-1/8"2,000 4.50 4.50 3.12 3.12 198 1853-1/8"3,000 2-1/16"5,000 4.50 5.00 3.12 2.06 264 2313-1/8"3,000 2-9/16"5,000 5.00 5.00 3.12 2.56 350 2753-1/8"3,000 3-1/8"3,000 5.00 5.00 3.12 3.12 264 2713-1/8"5,000 2-1/16"5,000 4.50 5.50 3.12 2.06 264 2953-1/8"5,000 2-9/16"5,000 5.50 5.50 3.12 2.56 364 3103-1/8"5,000 3-1/8"5,000 5.50 5.50 3.12 3.12 414 321
4-1/16"2,000 4-1/16"2,000 5.50 5.50 4.06 4.06 405 3544-1/16"3,000 3-1/8"3,000 5.00 6.12 4.06 3.12 451 4354-1/16"3,000 4-1/16"3,000 6.12 6.12 4.06 4.06 495 4514-1/16"5,000 2-9/16"5,000 5.00 6.50 4.06 2.56 447 4254-1/16"5,000 3-1/8"5,000 5.50 6.50 4.06 3.12 488 4254-1/16"5,000 4-1/16"5,000 6.50 6.50 4.06 2.56 565 486
1-13/16"10,000 1-13/16"10,000 4.38 4.38 1.81 1.81 191 1871-13/16"15,000 1-13/16"15,000 5.00 5.00 1.81 1.81 257 2532-1/16"10,000 1-13/16"10,000 4.38 4.38 2.06 1.81 191 1872-1/16"10,000 2-1/16"10,000 4.38 4.38 2.06 2.06 191 1872-1/16"15,000 1-13/16"15,000 5.00 5.00 2.06 1.81 257 2532-1/16"15,000 1-13/16"10,000 5.00 5.00 2.06 2.06 257 2532-9/16"10,000 2-1/16"10,000 4.50 5.12 2.56 1.81 246 2412-9/16"10,000 1-13/16"15,000 4.50 5.12 2.56 2.06 246 2412-9/16"10,000 2-9/16"10,000 5.12 5.12 2.56 2.56 286 2802-9/16"15,000 1-13/16"15,000 5.50 5.50 2.56 1.81 386 3072-9/16"15,000 2-1/16"15,000 5.50 5.50 2.56 2.06 389 3502-9/16"15,000 2-9/16"15,000 5.50 5.50 2.56 2.56 375 3353-1/16"10,000 1-13/16"10,000 4.50 5.88 3.06 1.81 370 3503-1/16"10,000 3-1/16"10,000 4.50 5.88 3.06 2.06 370 3503-1/16"10,000 2-9/16"10,000 5.12 5.88 3.06 2.56 407 4333-1/16"10,000 3-1/16"10,000 5.88 5.88 3.06 3.06 480 4643-1/16"15,000 1-13/16"15,000 6.31 6.31 3.06 1.81 486 4703-1/16"15,000 2-1/16"15,000 6.31 6.31 3.06 2.06 470 4403-1/16"15,000 2-9/16"15,000 6.31 6.31 3.06 2.56 440 4323-1/16"15,000 3-1/16"15,000 6.31 6.31 3.06 3.06 430 422
Run OutletsDimensions Wt. (lbs)
12
Body Bonnet Stem Gate Seat Stem Seal Seat SealBonnet
Seal
API CLASS AAGeneral Non-corrosive
Alloy Steel Forging or
casting
Alloy Steel Forging
Alloy Nitrided
Alloy Nitrided
Alloy Nitrided
Teflon FKM Graphite PEEK
Viton 304or 316SS
API CLASS BBGeneral Slightly
Corrosive
Alloy Steel Forging or
casting
Alloy Steel Forging
A564Type. 630 (17-4PH)
410 SSNitrided
410 SSNitrided
Teflon FKM Graphite PEEK
Viton 304or 316SS
API CLASS CCGeneral Moderately
Corrosive, CO2
410Stainless Steel
410Stainless
Steel
A564Type. 630 (17-4PH)
410 SSNitrided
410 SSNitrided
Teflon FKM Graphite PEEK
Viton 304or 316SS
API CLASS DD-NLSour Non-corrosive
Alloy Steel Forging or
casting
Alloy Steel Forging
Alloy Nitrided
Alloy Nitrided
Alloy Nitrided
Teflon FKM Graphite PEEK
Viton 304or 316SS
API CLASS EE-0,5Sour Slightly Corrosive
Alloy Steel Forging or
casting
Alloy Steel Forging
A564Type. 630 (17-4PH)
410 SSNitrided
410 SSNitrided
Teflon FKM Graphite PEEK
Viton 304or 316SS
API CLASS EE-1,5Sour
Moderately Corrosive CO2
Alloy Steel Forging or
casting
Alloy Steel Forging
Inconel 718
410 SSw/Hard facing
410 SSNitrided
Teflon FKM Graphite PEEK
Viton 304or 316SS
API CLASS EE-NLSour
Moderately Corrosive CO2
Alloy Steel Forging or
casting
Alloy Steel Forging
Inconel 718
410 SSw/Hard facing
410 SSNitrided
Teflon FKM Graphite PEEK
Viton 304or 316SS
API CLASS FF-0,5Sour, Moderately
Corrosive, H2S
410Stainless Steel
410Stainless
Steel
A564Type. 630 (17-4PH)
410 SSNitrided
410 SSNitrided
Teflon FKM Graphite PEEK
Viton 304or 316SS
API CLASS FF-1,5Sour
Highly Corrosive H2S and CO2
410Stainless Steel
410Stainless
Steel
Inconel 718
410 SSw/Hard facing
410 SSNitrided
Teflon FKM Graphite PEEK
Viton 304or 316SS
API CLASS FF-NLSour
Highly Corrosive H2S and CO2
410Stainless Steel
410Stainless
Steel
Inconel 718
410 SSw/Hard facing
410 SSNitrided
Teflon FKM Graphite PEEK
Viton 304or 316SS
API CLASS HHHigh Corrosion
Alloy Steel w/625 Claded
Alloy Steel w/625 Claded
Inconel 718
Inconel 718/625w/Hardfacing
Inconel 718/625w/Hardfacing
Teflon FKM Graphite PEEK
Viton Inconel 718
Service Condition
Body Description
Material speci�cation for API 6A
Gate Valves
13
The Apache slab gate is a high performance, bi-directional slab gate valve is ideal for high pressure,critical service applications from 3,000 psi through 20,000 psi.
Apache slab gate valve utilitizes a forged body andbonnect with alloy steel and at the minimum meetsAPI PSL 2 requirements.
Apache slab gate valves come in a variety of trim and product service levels, please consult thetrim chart or specify well conditions at time of inquiry for the best trim and PSL level for your application. Also available in ball screw or hydraulic operation at higher pressure ratings.
Overview
Slab Gate Valves
Size D (inch) E (inch) Wt (lbs)
1-13/16" 14.8 17 243
2-1/16" 15.5 17 329
2-9/16" 16.5 17 410
3-1/16" 17.4 18.75 518
4-1/16" 19.1 18.75 1118
5-1/8" 24.4 25 1528
3.06 24.38 7.9 BX-154
4.06 26.38 9.8 BX-155
5.12 29 12.7 BX-169
1.81 18.25 5.6 BX-151
2.06 20.5 6.1 BX-152
2.56 22.25 6.8 BX-153
A (Bore, inch) B (inch) C (inch) API Ring
Size C (inch) E (inch) Wt (lbs)
1-13/16" 5.9 17 260
2-1/16" 6.5 17 315
2-9/16" 7.7 18.75 576
3-1/16" 9 18.75 602
2.56 21 16.5 BX-153
3.06 23.56 17.4 BX-154
A (Bore, inch) B (inch) D (inch) API Ring
1.81 18 14.8 BX-151
2.06 19 15.5 BX-152
B (inch) D (inch) API Ring14.62 15.5 R-24
16.62 16.5 R-27
18.62 17.4 R-35
21.62 19.1 R-39
28.62 24.4 R-44
29 27.1 R-46
29 27.3 R-46
32 27.6 R-467-1/16" 7.06 15.3 25 2187
7-1/16" x 6" 6 14.8 25 2106
7-1/16" x 6-3/8" 6.38 15 25 2132
4-1/16" 4.06 8.3 17 688
5-1/8" 5.12 11 18.75 1387
2-9/16" 2.56 5.9 13.5 289
3-1/8" 3.12 6.7 17 419
Size A (Bore, inch) C (inch) E (inch) Wt (lbs)
2-1/16" 2.06 5.1 13.5 216
Flanged 10,000 psi working Pressure
Flanged 15,000 psi working Pressure
Flanged 5,000 psi working Pressure
14
The Apache expanding gate valve is a bi-directional, with a preferred sealing side valve. For wellhead, production trees, and manifold applications with working pressure rated up to 5,000 psi. Supplied in flanged or threaded connections.
Apache expanding gate valves utilizes a wedge gate design for easy manual operation and parts are usually compatible with most major manufacturer and distributors for easy repair andmaintenance.
Apache expanding gate valves comes in variety of trim and product service levels, please consult trim chart or specify well conditions at time of inquiry for the best trim and PSL level for your application.
Size A (Bore, inch) B (inch) C (inch) D (inch) E (inch) # of Turns Wt (lbs)
2-1/16" 2.06 9.62 5.3 19.6 13 13 126
2-9/16" 2.56 10.25 6.1 20.6 13 15-1/2 142
3-1/8" 3.12 11.38 7.6 22.8 16 20 236
4-1/16" 4.06 13 9.4 25.9 16 24-1/2 454
Threaded
Size A (Bore, inch) B (inch) C (inch) D (inch) E (inch) # of Turns Wt (lbs)
2- 1/16" 2.06 14.62 5.3 19.6 13 13 176
2- 9/16" 2.56 16.62 6.1 20.6 13 15- 1/2 224
3- 1/8" 3.12 18.62 7.6 22.8 16 20 334
4- 1/16" 4.06 21.62 9.4 25.9 16 24- 1/2 614
Flanged
Overview
Expanding Gate Valves
15
Ring Joint GasketsApache carries a wide selection of Ring Joint Gaskets in low carbon steel or stainless 316.R-Type – Octagonal gaskets designed for flanges up to 5,000 psiRX-Type – Interchangeable with R-type gaskets RX-type gaskets are pressure-energized for improved sealing efficiencyBX-Type – High pressure gaskets for working pressures up to 20,000 psi. Designed with pressure balance hole to equalize potential trapped gases within the grooves.
B7 Stud and nutsB7 bolts are available in either two nuts per stud, tap end or combo styles. Standard B7 are black finish. Special tap end thread configuration, finish or length requirements are available upon request.
Needle ValvesApache offers a full line of needle valves in carbon steel AISI 1040 or Stainless 316. Various body style and seat selection ensures the right valve for your application. Available in 6,000 psi and 10,000 psi.
Oil�eld Ball ValvesCarbon by Stainless threaded ball valves with pressure rating up to 5,000 psi. Available from 1” to 3” in both reduced and full port. All oilfield ball valves are equipment with a grease fitting. Also available in bolted pattern body style.
Consumables
16
APACHE PRESSURE PRODUCTS3909 BAILEY AVE
MANVEL, TX 77578(713) 941-1669(713) 941-2660
WWW.APACHEMFG.COM
1. PRICING - Products and services provided will be invoiced at the price shown and agreed upon at the time of service, invoice, or, as printed on any and/or all Apache Pressure Products sales/information material including purchase orders, letters, or emails. Printed prices do not include freight or any applicable taxes. Taxes and other fees such as shipping will be quoted and or billed as per order, or as required. 2. TERMS OF PAYMENT – Payment is due upon receipt or as agreed to by contract. Any unpaid past due balance will accrue interest and penalties at the rate of 12% APR, or the max allowed by state law, for the period that the past due balance remains unpaid, and shall not be less than twenty dollars ($20.00). Further customers agree to pay all attorney and/or collection fees and waives notice of such should subsequent litigation become required to e�ect collection or to assert our interest for unpaid balances.
3. QUOTATIONS - All quotations and sales are F.O.B. our plant in Manvel, Texas. Net prices and discounts are subject to change without notice. Prices in e�ect at the time of receipt of order whether higher or lower, will prevail. All sales tax, use tax, or other excise taxes which may be required by law to be paid in connection with any sale will be added to the gross sales price.
4. DELIVERY/FREIGHT - All shipments are F.O.B. Manvel, Texas unless otherwise stated. All promises of shipments are as closely estimated as possible. We will make every e�ort to ship within the time promised, but do not guarantee to do so, or assume further or implied liability with respect to delivery dates or timelines. Our responsibility ceases upon delivery to any common carrier or other agent furnished or speci�ed by the customer and we do not, unless previously instructed, insure shipments beyond the point of delivery to such carriers. Full freight allowance will be covered on individual orders of $3000.00-$5000.00 based upon the state to which the shipment will be delivered to. The Freight carrier will be chosen by the seller unless otherwise instructed or agreed upon in advance by both parties. Individual orders that do not meet the required amount will not receive freight allowance.
5. SHORTAGES AND DAMAGES IN TRANSIT - All claims for shortages or damaged products must be made within �ve days after receipt of shipment. All lost or damaged materials in transit become the responsibility.
6. WARRANTY - This warranty is in lieu of all other warranties, expressed or implied, including any implied warranty or merchantability or �tness for any use or purpose. All of Apache Pressure Products INC. products are warranted to be free from manufacturing defects and workmanship for a period of one (1) year from the date of shipment, and if found to be defective within that period the product will be replaced at no charge to the customer. However, the product being returned must have been used in accordance with the intended or published purpose, and approved installation and operating practices. There must be a properly �lled out return authorization (RA) before credit or replacement will be o�ered.
7. CANCELLATIONS/CHANGES - Cancellations or instructions to change work or delivery must be submitted in writing to the seller. If any order is canceled the buyer will be responsible for the payment of work already performed and any material already in use.