From Our Reference Telephone Telefax DC-IA/SPF75 +49 711 811 32990 Memo Stuttgart-Feuerbach 2013-02-14 Page 1 of 13 Recipient Cc New features in MTpro 3.4.2.0 This document describes the new features of MTpro version 3.4.2.0 as com- pared to MTpro 3.4.0.1. Table of contents 1 General.................................................................................................... 2 2 New features of the basic software .......................................................... 3 2.1 Switch between product hierarchies with the new drop down field .... 3 3 New contents of the base software .......................................................... 4 3.1 New product data ............................................................................. 4 3.2 New catalogs .................................................................................... 6 3.3 New Assembly instructions ............................................................... 6 3.4 Updated CAD models ....................................................................... 7 4 New products in Layout Designer ............................................................ 8 5 New features in Layout Designer ............................................................. 9 5.1 Selection of perspective.................................................................... 9 5.2 Transparency.................................................................................... 9 5.3 Rendering types ............................................................................. 10 5.4 Save view ....................................................................................... 10 5.5 Fixation of measure lines ................................................................ 11 5.6 TFE Transfer-Function-Entity for TS 1 ............................................ 12 5.7 Introduction of the new template library .......................................... 13
13
Embed
Table of contents · 2013-02-14 Page 2 of 13 1 General . This document describes the new features of MTpro version 3.4.2.0 as com-pared to MTpro 3.4.0.1. The MTpro update can be downloaded
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
From Our Reference Telephone Telefax
DC-IA/SPF75 +49 711 811 32990
Memo
Stuttgart-Feuerbach
2013-02-14
Page 1 of 13
Recipient Cc
New features in MTpro 3.4.2.0 This document describes the new features of MTpro version 3.4.2.0 as com-pared to MTpro 3.4.0.1.
Table of contents 1 General .................................................................................................... 2 2 New features of the basic software .......................................................... 3
2.1 Switch between product hierarchies with the new drop down field .... 3 3 New contents of the base software .......................................................... 4
3.1 New product data ............................................................................. 4 3.2 New catalogs .................................................................................... 6 3.3 New Assembly instructions ............................................................... 6 3.4 Updated CAD models ....................................................................... 7
4 New products in Layout Designer ............................................................ 8 5 New features in Layout Designer ............................................................. 9
5.1 Selection of perspective .................................................................... 9 5.2 Transparency.................................................................................... 9 5.3 Rendering types ............................................................................. 10 5.4 Save view ....................................................................................... 10 5.5 Fixation of measure lines ................................................................ 11 5.6 TFE Transfer-Function-Entity for TS 1 ............................................ 12 5.7 Introduction of the new template library .......................................... 13
From Our Reference Telephone Telefax
DC-IA/SPF75 +49 711 811 32990
Memo
New features in MTpro 3.4.2.0
Stuttgart-Feuerbach
2013-02-14
Page 2 of 13
1 General This document describes the new features of MTpro version 3.4.2.0 as com-pared to MTpro 3.4.0.1. The MTpro update can be downloaded and installed directly from Internet us-ing the built-in update function (full MTpro installation, Internet connection and administrator privileges are required). Depending on the option settings MTpro can check automatically, if updates are available. To run the update manually, invoke the command “Check for updates…“ in MTpro’s help menu and follow the directions of the update wizard.
From Our Reference Telephone Telefax
DC-IA/SPF75 +49 711 811 32990
Memo
New features in MTpro 3.4.2.0
Stuttgart-Feuerbach
2013-02-14
Page 3 of 13
2 New features of the basic software
2.1 Switch between product hierarchies with the new drop down field
The product hierarchy was extended with a drop down field which makes it easier to switch between MTpro product catalog and user catalog.
Depending on your selection, either the entries from the integrated product catalogs or the user-defined products will be shown in the product data list.
From Our Reference Telephone Telefax
DC-IA/SPF75 +49 711 811 32990
Memo
New features in MTpro 3.4.2.0
Stuttgart-Feuerbach
2013-02-14
Page 4 of 13
3 New contents of the base software
3.1 New product data The following products were added:
- Stop gate, damped VE 2/D… - Stop gate VE 2/D-150
Transfer system TS 5
- Assembly units
From Our Reference Telephone Telefax
DC-IA/SPF75 +49 711 811 32990
Memo
New features in MTpro 3.4.2.0
Stuttgart-Feuerbach
2013-02-14
Page 7 of 13
3.4 Updated CAD models The following CAD models were updated: Basic Mechanic Elements
- Cubic connector - Hinges
Transfer system TS 1
- Curves KE 1 and CU 1 Transfer system TS 2plus
- Curves KU 2 - Switch bracket SH 2
VarioFlow (S)
- Drives - Section profiles
From Our Reference Telephone Telefax
DC-IA/SPF75 +49 711 811 32990
Memo
New features in MTpro 3.4.2.0
Stuttgart-Feuerbach
2013-02-14
Page 8 of 13
4 New products in Layout Designer The following products were added to the Layout Designer: Manual production systems
- Ergonomic workplace accessories: o Grab containers and accessories o Tool holders with container mount o 30x30 guide plate o Keyboard rack o Ergonomic mat
From Our Reference Telephone Telefax
DC-IA/SPF75 +49 711 811 32990
Memo
New features in MTpro 3.4.2.0
Stuttgart-Feuerbach
2013-02-14
Page 9 of 13
5 New features in Layout Designer
5.1 Selection of perspective
Now it is also possible to select parallel perspective in Layout Designer:
5.2 Transparency Like in the CAD model window, a slider to adjust model transparency is now available in Layout Designer.
From Our Reference Telephone Telefax
DC-IA/SPF75 +49 711 811 32990
Memo
New features in MTpro 3.4.2.0
Stuttgart-Feuerbach
2013-02-14
Page 10 of 13
5.3 Rendering types Similar to the selection of render types for CAD models, it is now possible to select the rendering type inside Layout Designer. The following rendering types are available:
5.4 Save view The new illustration capabilities – perspective, transparency and rendering type – are also applied when saving the Layout Designer view. Additionally, the background color is included in the exported picture.
From Our Reference Telephone Telefax
DC-IA/SPF75 +49 711 811 32990
Memo
New features in MTpro 3.4.2.0
Stuttgart-Feuerbach
2013-02-14
Page 11 of 13
5.5 Fixation of measure lines
Now it is possible to adjust measure lines in a new measure line editor win-dow. You are able to overwrite the measured distance to align parts in a cer-tain distance Additionally, measure lines now can be locked to hold the measured distance. With this feature parts and assemblies can be connected without being snapped.
To lock measure lines, first create a measure line and double click on it with the left mouse button. The measure line editor window will appear where you can overwrite the distance. The part, which was clicked last during the crea-tion of the measure line, will be moved. The other part stays in its place.
It is possible to switch the part to be moved by clicking on . With “Lock Measure Line” the distance between the measured parts will be fixed, for example to move both parts together.
From Our Reference Telephone Telefax
DC-IA/SPF75 +49 711 811 32990
Memo
New features in MTpro 3.4.2.0
Stuttgart-Feuerbach
2013-02-14
Page 12 of 13
5.6 TFE Transfer-Function-Entity for TS 1 The Transfer-Function-Entities already known from TS 2plus are now also available in TS 1.
TFEs are used to insert transport control elements for a specific transfer func-tion (outfeed/infeed to transversal/ longitudinal section etc.) in one entity.
A TFE consists of several transport control elements, which are grouped in an assembly.
In addition to the known features, the TS 1 TFEs can also be adjusted to the work piece pallet orientation by clicking on the work piece pallet symbol on the Transfer-Function-Entity. With this it is possible to consider the arrangement of switch elements on the work piece pallet.
From Our Reference Telephone Telefax
DC-IA/SPF75 +49 711 811 32990
Memo
New features in MTpro 3.4.2.0
Stuttgart-Feuerbach
2013-02-14
Page 13 of 13
5.7 Introduction of the new template library
In addition to the existing user library, the Lay-out Designer now has a new template library which will be used to provide selected compo-nents. Initially, components for Hydraulics training sys-tems have been included, which can be insert-ed via drag and drop into any Layout Designer drawing. The new template library can be found beneath the “Library” tab: