Taarup 2400 and 2500 series Mounted Disc Mowers€¦ · cooling and lubrication of the entire cutter-bar. Each individual disc bearing housing can be removed in a matter of minutes

Taarup 2400 and 2500 seriesMounted Disc Mowers

Disc Mowers offering reliable performance and a clean cut

Taarup offers a new rear mounted disc mower series withworking widths of 2.0 - 3.2 m. Taarup 2400 series offer a very reliable performance, easy handling and high output at low power requirements. The flexible suspensionensures that the mower adapts itself to even the worstground conditions.

Flexible suspension and reliable performance

2

Taarup 2400 series

Flexible suspension for extremeuneven field conditionsTaarup 2400 series offer a very flexible

suspension giving perfect ground contour

following. This ensures that the mower

is able to adapt to extremely uneven field

conditions giving the best mowing result.

The linkage of Taarup 2400 ensures that

the mower is capable of working on steep

angles or in hilly conditions. For extreme

hilly conditions an optional hillside equip-

ment is offered.

The Taarup 2400 series can pivot 35° up

and down without any adjustment.

Easy adjustment of ground pressureA large compensation spring ensures the

best possible support of the cutterbar of

Taarup 2400 series. This gives optimum

ground pressure along the entire cutter-

bar, even under differing conditions and

contours. The ground pressure is easily

and accurately set by adjusting one

spring.

Lift of mower unitOn headlands the mower is lifted without

activating the three-point linkage of

the tractor which needs no adjustment

in the field. A clever and simple solution

ensuring good clearance and eliminating

swath damage.

Convenient transport solutionFor transport the machine is folded

hydraulically from the tractor cab to the

vertical transport position well behind

the tractor ensuring a stable and

steady transport.

Taarup 2400 series offer a very even

swath formation whether it is wide or

narrow. With the optional swath rollers

the swath is separated from the uncut

crop.

Adjustable lifting pinsTaarup 2400 series offer a very easy

mounting on the tractor. When the

machine is parked the lifting pins are

horizontal. The linkage pins are easily

adjusted to match the tractors width,

which enables the mower to cut to its

full working width.

3

Centre suspension for perfect ground contour following

4

Taarup 2500 series offer high performance and easy handling,combined with centre suspension that absorb uneven field surfaces.

Taarup 2500 series

Taarup 2500 series withworking widths ranging

from 2.4 to 4.0 m.

Strong frame for high performance The patented leaf springs are integrated

in the frame of the Taarup 2500 series.

This unique and though simple suspen-

sion design has made it possible to

combine strength, performance and

easy handling.

5

Centre suspension The centre suspension of the Taarup

2500 series ensures perfect ground con-

tour following. Uneven field surfaces are

absorbed by the suspension. The

ground pressure is easily and very

accurately set by the handle on top

of the suspension frame.

Easy coupling and uncouplingWhen the Taarup 2500 series are

parked the lifting pins are horizontal and

the suspension is standing stable on 2

support legs for easy coupling and

uncoupling.

Swath rollersThe Taarup 2500 series can be fitted

with swath rollers in both left and right

hand side.

6

Non Stop safety system Taarup 2400 and 2500 series are fitted

with a Non-Stop breakaway system to

protect the cutterbar.

If hitting an obstacle the Non-Stop break-

away system will swing the machine back-

wards and over the obstacle and then

return it to the original working position.

No need to stop - no time lost.

The famous high specification Taarup

cutterbar is an all welded design with

a high oil capacity ensuring a very low

working temperature. The result is a

smooth and well protected transmission

with a long life expectancy.

The benefits are lower repair and main-

tenance costs - at the same time as a

clean and aggressive cut.

Twisted knivesAll Taarup disc mowers are equipped with

twisted knives as standard.The twisted

knife ensures a clean cut under all condi-

tions, especially under difficult conditions

(light and wet material) where the lift and

efficient transport over the cutterbar is

important.

For very rough conditions (stony and

uneven ground) Taarup offers the Super

Cut or the V-shaped knives as an option

on all machines.

High oil capacity The Taarup cutterbar has been designed

for low maintenance. It has a high oil

capacity ensuring a very low working tem-

perature. This ensures an efficient oil

cooling and lubrication of the entire cutter-

bar.

Each individual disc bearing housing can

be removed in a matter of minutes for easy

maintenance and bearing replacement.

Taarup uses round discs. Round discs

are less susceptible to stone impact and

reduce shock loads in the transmission.

All Taarup disc mowers are equipped

with twisted knives ensuring a perfect cut

and efficient transport over the cutterbar.

Cutterbar with round discs

Taarup 2400 and 2500 series

Technical specifications

Model 2420 2424 2428 2432 2524 2528 2532 2540

Working width (m) 2.00 2.40 2.80 3.20 2.40 2.80 3.20 4.00

Swath board L/R or

swath roller L/R fitted,

approx. (m) 0.9-1.4 1.3-1.8 1.7-2.2 2.1-2.6 1.3-1.8 1.7-2.2 2.1-2.6 2.5-3.0

Weight, approx. (kgs) 510 530 555 585 650 700 775 950

Number of discs (pcs.) 5 6 7 8 6 7 8 10

Stubble height (mm) 35-60 35-60 35-60 35-60 35-60 35-60 35-60 35-60

Disc (rpm) 3000 3000 3000 3000 3000 3000 3000 3000

Power requirement,

minimum (KW/hp) 30/40 33/45 37/50 40/55 33/45 37/50 40/55 50/70

Pto, standard (rpm) 540 540 540 540 540 540 540 540

Pto, optional (rpm) - - - - 1000 1000 1000 1000

Overrun clutch Standard Standard Standard Standard Standard Standard Standard Standard

Friction clutch - - - - Standard Standard Standard Standard

Hydraulic transport folding Standard Standard Standard Standard Standard Standard Standard Standard

7

The Kverneland Group regards the sale of each machine as the start

of a long-term and valuable relationship. To support the relationship,

we provide the vital high quality spare parts and an efficient spare parts service.

Our spare parts are designed to ensure reliability, safety and an optimal

performance of the machines. The quality lies in the innovative construction

work and in the production processes at our production sites.

You can depend on the Kverneland Group to offer a premium service.

It's vital for us!

Vital Parts

Optional equipment • Straw divider

• High skids (20 mm)

• Throwing wings

• Swath rollers left and right

• Swath board left and right

• Lighting kit

KR

OG

AG

ER

09.2

003

Kverneland Group UK Ltd.Walkers Lane, Lea Green, St. HelensMerseyside WA9 4AF, UKPhone +44 1744 853 200, Telefax +44 1744 853 400

Kverneland Ireland Ltd.Hebron Industrial EstateKilkenny, IrelandPhone +353 56 51597, Telefax +353 56 62207

Kverneland International BVHoofdweg 1278, NL-2153 LR Nieuw-Vennep, The NetherlandsP.O. Box 1000, NL-2150 BA Nieuw-Vennep, The NetherlandsPhone +31 252 662 244, Telefax +31 252 687 325

Dealer:

Kverneland Kerteminde AS reserves the rightto make changes in design or to add new features without obligation on implements purchased before or after such changed aremade.

Kverneland Group is thelargest specialised producerand distributor of farmingimplements in the world.The Group is a family of strong brands enabling us to provide both the farmerand the dealer with a uniqueand complete range of highquality products for soilpreparation, grass treatment,seeding, spreading, spraying, potato cultivation and grape harvesting.

www.kvernelandgroup.com

The specialist !Taarup offers the right solution for the forage harvesting. Ongoing develop-ment enables us to be in linewith the demands of modernfarming. Whatever yourdemands may be, we havethe right products and solu-tions.

Please ask for details and leaflets

showing other Taarup products

from our complete product range of

mowers, mounted and trailed mower

conditioners, rakes and tedders,

forage harvesters, balers, bale

wrappers, bale choppers and

feeding equipment.

For further information, visit us at

www.taarup.com