Telephone elephone elephone elephone elephone DOMO DOMO DOMO DOMO DOMO Messages Messages Messages Messages Messages hands free hands free hands free hands free hands free USER MANUAL
TTTTTelephoneelephoneelephoneelephoneelephoneDOMODOMODOMODOMODOMO
MessagesMessagesMessagesMessagesMessageshands freehands freehands freehands freehands free
USER MANUAL
1. Viewer.
2. Key Answering machine.
3. Key Messages/Accept.
4. Key Deactivate/Exit.
5. Key LL. at Three.
6. Handset.
7. Keyboard of Machine.
8. Key R; change from/to Uppercase/Lowercase.
9. Key Phone Book.
10. Key to Record.
11. Key Free Hands
12. Microphone.
13. Key Rellamada / To Pause.
14. Key Mute.
15. Speaker.
16. Key to access Personal Attention of Telefónica 1004.
17. Key to Erase.
18. Key to Telefónica operator 1077.
19. Key to access European Emergency Number 112.
20. Scroll Keys and Volume.
21. Key for Menu and Selecting
22. Key to hold second caller.
23. Key to Divert
24. Indicator light
DOMO Messages Hands Free 3
CONTENTS
INTRODUCTION ............................................................................... 4INSTALLATION ................................................................................. 6TELEPHONE SETTING ................................................................... 7DIALLING ........................................................................................ 11USING THE PHONEBOOK ............................................................ 13DIRECT SERVICES KEYS ............................................................. 16MUTE FUNCTION .......................................................................... 17LISTENING TO A CALL .................................................................. 18HANDS FREE FUNCTION ............................................................. 18IDENTIFICATION OF CALL SERVICE ........................................... 20SUPPLEMENTARY SERVICES ..................................................... 23
Diverting Incoming Calls .......................................................................... 23
Activation ................................................................................................... 23
Deactivation ............................................................................................... 23
Answering Machine Service .................................................................... 24
Accessing the Answering Machine ........................................................ 24
Call Waiting ................................................................................................ 25
Making a Three-Way Call .......................................................................... 25
TEXT MESSAGING (SMT) ............................................................. 27To Activate / Disable the Text Messaging Service (SMT) ..................... 28
Changing the Extension Number ............................................................ 29
Private Mail ................................................................................................ 31
Sending a Message ................................................................................... 33
Receiving Messages ................................................................................. 37
Reading Messages .................................................................................... 37
DISTRIBUTION LISTS FOR MESSAGING .................................... 40CHANGE ANSWERING SERVICE LANGUAGE TO ENGLISH .... 43TROUBLESHOOTING .................................................................... 44MAINTENANCE .............................................................................. 45TECHNICAL SPECIFICATIONS ..................................................... 45GUARANTEE CERTIFICATE ......................................................... 46CONDITIONS OF GUARANTEE .................................................... 47
DOMO Messages Hands Free4
INTRODUCTION
This booklet is provided with the DOMO Messages Hands Free telephone equip-ment. It is recommended that you read it thoroughly before using the new telephone.It is laid out in an order that makes subjects easy to find, and includes the methodsto access the various services provided by Telefónica and describes the messagesthat are displayed in the viewer.
The DOMO Messages Hands Free is an electronic telephone of modern design thatincorporates the following characteristics -
- Dialling.
- Numeric keyboard with alphabetic characters.
- On-screen display of the dialled number.
- Phonebook with a memory for up to 50 names and number.
- A listing with the last 50 incoming or outgoing calls.
- Hands Free function X))).
- Adjustment of the volume of the speaker.
- Adjustment of the volume of the microphone.
- Key R.
- Redailling from a list of outgoing Calls.
- Insertion of pauses while dialling.
- Viewer window with three lines of information.
- Shortcuts to the Telefonica’s Supplementary Services: Call Waiting, Three-WayCalls, Call Diversion and Answering Machine Service.
- Text Messaging (SMT) - sending, receiving and editing text messages (SMT).
- Identification of incoming call numbers.
- Indicator light showing New Calls, Text Messages (SMT) and messages stored inthe Answering Machine (if available from the telephone network).
- Shortcut to the Telefónica Personal Attention line - 1004 (Blue Key).
DOMO Messages Hands Free 5
Shortcut to the European Emergency number - 112 (Red Key).
Shortcut to the Telefónica Operator - 1077 (Green Key).
Mute Function, with optical warning.
Activation / Deactivation of the 1077 Code.
All services available using one telephone line.
Reception capsule giving help to people with hearing difficulties.
Handset assessories such as line cords.
Installation possible during evenings.
Real-time clock.
Selection of three melodies and two-tone levels.
The DOMO Messages Hands Free comes with -
The Telephone.
The Handset.
Spiral cord for handset/base.
Line cord.
User Manual with guarantee card and Quick Guide of Use.
NOTE:To be able to use the Identification of Calls option and other SupplementaryServices that are offered with the DOMO Messages Hands Free telephone, it isnecessary to have made a request for those services from Telefónica.
To send or to receive text messages, it will be necessary to activate the serviceaccording to instructions in section 12 of this manual - SERVICE OFMESSAGES OF TEXT (SMT). Keep in mind that it is necessary to haverequested the Identification of Calls Service.
IMPORTANT NOTICE:To connect two or more handsets for using messages, use DIFFERENTEXTENSION, read details on Extensions on page 27.
DOMO Messages Hands Free6
INSTALLATION
Connect the longest end into thetelephone base and the other end inthe hand piece as shown in the figure.
Connect the end of the input cable tothe apparatus and the other end intothe socket of the phone plug.
If you need to increase the apparatusinclination on the table, insert the basesupport bar into the apparatus andpress until it clicks into place.
Adjust the cables under the apparatusto ‘exit’ in the best direction.
Fix a base support (optional) for wallassembly, if necessary.
Use the template provided with thebase support, to mark the two holesto be drilled in the wall.
Connect the cable of external line inthe screws located inside base.
Connect the cable of telephone line inthe connector so it is housed internally.
Wind up surplus in the flukes as shownin the figure.
Installing DOMO Telephone and connecting it to a landline.
This telephone should only be connected tolines that have Multifrequency.!
Connection ofcord to thehandset
Connecting thetelephone line
Assembly ofbase stand
Assembly ofhand piece
DOMO Messages Hands Free 7
Once connected to the telephone line, you may need to change phone settings tosuit your own requirements. You can change the ringtone and volume of the bell,adjust the viewer contrast, to program the hour and date, to activate or disable thetones of confirmation, validation and error, and to select the Code of Operator ofTelefónica.
These adjustments are carried out with the telephone handset down and bypressing the Marcar/Menú key (21) repeated times until selected function is displayedin the viewer.
So that the handset stays in placewhen the apparatus is hung on a wall,it is necessary to take remove and ro-tate the piece of assembly as shownin the figure..
TELEPHONE SETTING
Press the Marcar/Menú key (21) untilthe message appears in the viewer.
With the keys cursor ÙÚ (20) one ofthe three available ring tones can beselected and will be heard duringselection.
Press Desactivar/Salir (4) whenselection is complete.
Press the key Marcar/Menú (21), un-til the Timbre option is shown in theviewer.
With the keys ÙÚ (20), select highlevel or low level of sound. In the viewerthe selected level will be shown as amessage, and with an Black bell icon(high) or half Black bell (low).
Selection ofthe melodytones
Selectionbell levelsound
CAMBIO RING: é
TIMBRE: ê HIGH é
TIMBRE:ê LOW é
DOMO Messages Hands Free8
Press Desactivar/Salir (4) to returnto the normal display.
Press the Marcar/Menú key (21) un-til the message appears in the viewer.
Press the ÙÚÙÚÙÚÙÚÙÚ keys (20) to increaseor decrease the contrast. The levelselected will be shown in the viewer.
Press the Desactivar/Salir key (4) toreturn to the normal display.
Press the Marcar/Menú key (21)again until PULSE HORA/FEC. Is dis-played.
With the handset down adjust the hourand date by typing them directly intothe keyboard. If you make a mistake,use the Borrar key (17) to Erase.
For example, if the hour and date isthe 20th. of November and 2:11am,type: 20100211.
Once the last digit of the date has beentyped, the new hour and date will bedisplayed in the viewer. If the processis not completed, the previous anddate will remain displayed.
After finishing this operation, you willbe able to select the next option bypressing the Marcar/Menú (21) keyagain, or return to the normal displayby pressing the Desactivar/Salir key(4).
Remember, if you have the callerIdentification service enabled, whenreceiving a call, the hour and datedisplay will be adjusted automatically.
Adjustingthe contrastof theviewer
Setting thehour anddates
CONTRAST. é3ê
HORA/FEC PULSE.
HORA/FEC PULSE.
DOMO Messages Hands Free 9
This Menu option lets you activate ordeactivate the beep tone, whichsounds when you press a key.
Press the Marcar/Menú key (21) untilthe viewer shows one of the followingmessages. If the beep has alreadybeen activated, this message appearsin the viewer.
If the beep has already beendeactivated, this message appears inthe viewer.
Using the cursor keys ÙÚ (20) youcan activate or deactivate the beep.
Press the Desactivar/Salir key (4) toreturn to the normal display in theviewer.
This Menu option allows you hear vali-dation and error tones. The validationtone is a long tone which indicates thata function has been executed correctly.If the operation was incorrect, threeshort tones will be heard.
Press the Marcar/Menú key (21) untilthe viewer shows one of the followingmessages. If the validation and errortones are activated, this message isshown in the viewer.
If the tones are disabled, this messageis shown in the viewer.
Using the cursor keys ÙÚ (20) youcan activate or deactivate thevalidation and error tones.
Press the Desactivar/Salir key (4) toreturn to the normal display in theviewer.
Toneconfirma-tion of apressed key
Validationand errortones
SONIDOS TECLA: SI
SONIDOS TECLA: NO
SONIDOS V/E: SI
SONIDOSV/E: NO
DOMO Messages Hands Free10
Activating the 1077 code.
This option is disabled when youreceive your DOMO telephone. Thismeans that the numbers of missedcalls, etc. cannot be viewed in theviewer.
To activate, press the Marcar/Menúkey (21) until this message is dis-played in the viewer -
Type the sequence: *1077#-
In the viewer this message will appearfor 2 seconds -
If *1077# has not been typed correctly,the viewer will display -
You can abandon the programming bypressing the key Desactivar/Salir (4),in which case the configuration will nothave been changed.
Deactivating the 1077 code.
Press the Marcar/Menú key (21). Ifthe Code 1077 is already activated,this message will be displayed in theviewer.
Type the sequence: #1077 #.
In the viewer, this message will bedisplayed for 2 seconds -
If #1077# has not been typed correctly,the message in the viewer will show -
Activation /deactivationof the 1077code
ACTIVAR 1077
1077 ACTIVO
ACTIVAR 1077
DESACTIVAR 1077
1077 INACTIVO
DESACTIVAR 1077
DOMO Messages Hands Free 11
1 2 3
4 5 6
7 8 9
* 0 #
F
Llamadas/
Volumen
Ú Ù FMarcar/
Menu Borrar
Marcar/
Menu BorrarLlamadas/
Volumen
Ú ÙF
FX
GrabarR/A - aMute
AgendaRellamada
PausaX)))
GrabarR/A - aMute
AgendaRellamada
PausaX)))
E
Dialling with the handset down orin hands free mode.
Pick up the hand piece or activate thehands free function. Wait for thedialling tone and then press the keysfor the required telephone number. Asyou type, the numbers will be displayedin the viewer.
Dialling with the hands free functiondisabled.
Press the keys of required telephonenumber, which will be shown in theviewer as they are typed. To clear anynumber incorrectly typed, press theBorrar key (17).
To pick up the handset or activate thefree hands function, and then listen forthe dialling tone. Press the Marcar/Menú key (21).
With any dialling type, the viewer willdisplay the length of time of the callafter the last digit has been typed.
You can zero the chronometer in anytime by pressing the key to Borrar key(17). This chronometer doesn’t showthe real time of the duration of the call.
To stop dialling momentarily, press theRellamada/Pausa (13) key. There willbe a pause of 2 seconds.
If the DOME Messages Hands Freeapparatus is connected to aswitchboard, press the key R/A-a key(8) followed by the extension numberto which the call has to be transferred.
DiallingInstructions
To pauseduringdialling
Transfer ofcalls to anextension(R/A-a key)
DIALLING
DOMO Messages Hands Free12
FX
GrabarR/A - aMute
AgendaRellamada
PausaX)))
This way of dialling is carried outwithout the necessity of using thenumeric keyboard, so that with thehandset not picked up, or with theactivated or disabled hands freefunction, it provides three options.
Automatic Dialling from thePhonebook.
See information on storing names andnumbers in the Phonebook in Chap-ter 5 of this manual.
Automatic Dialling from list ofprevious callers.
The DOMO Messages Hands Freephone stores a chronologically list ofcalls in its memory. To view the storednumbers, do the following –
With the Handset down or picked up,or with the disabled or activated handsfree function:
Press the Rellamada/Pausa (13) key.
Use the cursors keys ÙÚ (20) to findthe number to be called.
Once selected (you can put down thehandset or use the hands free func-tion), press the Marcar/Menú (21) key.
Automatic Dialling from the List ofCalls.
The DOMO Messages Hands Free hasa list of the last 50 calls (incoming andoutgoing) in chronological order. Toinitiate this list, make sure that youhave ordered the caller IdentificationService.
To automatically ring a number fromthe stored list, do the following -
A u t o m a t i cDialling.
DOMO Messages Hands Free 13
- With the handset down or pickedup, or with the disabled or activatedhands free function :
Use the cursors ÙÚ (20) to selectthe number to wish to call.
Once the number is selected (put downthe handset, or activate the hands freefunction if you wish), press the Marcar/Menú key (21) to begin the call.
o8! ê MARINE ARAG
USING THE PHONEBOOK
The Phonebook has a maximum capacity of 50 entries into which you can typenumbers of up to 24 digits plus an associated name of 15 characters. Once entered,a number and the associated name will be stored in alphabetical order in thePhonebook.
You can make a Phonebook entryduring a conversation. This can bedone with the handset down or pickedup, or with the disabled or activatedhands free function.
Press the Grabar key (10) and thismessage will be shown in the viewer.
A name is required for each entry aseach number is stored alphabetically.
Type the name (up to 15 characters)using the letters on the numeric keys.These keys offer the followingcharacters and numbers -
Key 1: 1. - > 1 i Key 7: P Q R S 7Key 2: A B C 2 " Ç Key 8: T U V 8 ? üKey 3: D E F 3 $ Key 9: W X Y Z 9 ¿Key 4: G H I 4 % Key *: * + ; ) ( •Key 5: J K L 5 & Key 0: @ _ , ’ / oKey 6: M N Ñ 0 6 Key #: (Space _) # : = <
Diallingfrom thePhonebook
GRABAR NOMBRE
FERNANDO ARAG_
DOMO Messages Hands Free14
For example, to enter the letter S,press the 7 key quickly four times.
Press the Grabar key (10) again torecord the name in the phonebook.The viewer will display this message -
Enter the telephone number associ-ated with the name in up to 24 digits.
To conclude, press the Grabar key (l0)to record the number. The viewer dis-play will now request the next name.
If you need to, you can enter anothername and number using the previousinstructions. If you have no more tobe entered, press the Desactivar/Salirkey (4) to return to the normal display.
With the handset down or picked up,press the Rellamada/Pausa key (13).
Press the keys cursor ÙÚ (20) toselect the number that you want torecord in the Phonebook.
Press the Grabar key (l0) and theviewer will display -
Type the name and press the Grabarkey (l0). The telephone will store thename and number.
With the handset down or picked up,or the hands free function disabled oractivated, press the cursor keys ÙÚ(20) until you can see the number youwant to record in the Phonebook.
Press the Grabar key (l0) and in theviewer this message will be displayed.
Type the name and press the Grabarkey (l0). The telephone will store thename and number.
Recordingof therellamada inthe calendar
Recordingof therellamada inthe calendar
GRABAR NUMERO
912397657
GRABAR NOMBRE
GRABAR NUMERO
MIGUEL_
GRABAR NOMBRE
DOMO Messages Hands Free 15
If the stored number has a nameassociated with it, you can modify itby typing it again. To conclude it pressGrabar key (l0).
Press the Agenda key (9).
Press the (7) key, which is the initial ofthe name you want to find, or severaltimes, until in the viewer the first nameis displayed. If there is more than onename starting with that letter, press thecursor keys ÙÚ (20) until it is found.
If the number shown has more than15 digits, the symbols ×Ø will bedisplayed to indicate that there isadditional information, which will beshown after 4 seconds.
On the third line of the viewer, thenumber of the alphabetical position inthe phonebook, will be displayed.
You can abandon the operation at anytime by pressing the Desactivar/Salirkey (4).
With the Handset up or down, or thehands free function disabled oractivated:
Press the Agenda key (9).
Press the (7) key, which is the initial ofthe name you want to find, or severaltimes, until in the viewer the first nameis displayed. If there is more than onename starting with that letter, press thecursor keys ÙÚ (20) until it is found.
Using thePhonebook
Automaticdiallingfrom thephonebook
× Ø 912397657234234
P:01
× Ø 912397657
P:01
FX
Grabar
R/A - aMute
AgendaRellamada
Pausa
X)))
DOMO Messages Hands Free16
Once the number is selected, put downthe handset, or activate the hands freefunction, and press the Marcar/Menúkey (21) and the number will be di-alled.
While looking at a Phonebook entry,pressing the Borrar key deletes thatentry. In the viewer a request for con-firmation to delete will be displayed.
Press the # key to confirm, or pressDesactivar/Salir (4) to cancel.
DIRECT SERVICES KEYS
With the handset up or down and withthe hands free function activated,listen for the dialling tone.
Press the Blue key (16).
See the viewer display.
With the handset up or down and withthe hands free function activated,listen for the dialling.
Press the Red key (19).
See the viewer display.
Dial the number of the Telefónicaservice required and with the handsetup or down and the hands free functionactivated, press the Green key (18).
The number of the Telefónica servicerequired will be prefixed to the numberyou dialled and the call will be started.
Deleting aPhonebookentry
Shortcut totheTelefónicapersonalattentionline (1004)
Access totheEuropeanemergencynumber
Shortcut totheTelefónicaoperatorselection
CONFIRMAR CON #
TELEFONICA
EMERGENCIA
1077912397657
FX
FX
FX
DOMO Messages Hands Free 17
You can also press the Green key (18)with the handset down, to dial thenumber, to pick up the handset or toactivate the hands free function andto press the Marcar/Menú key (21).
If it begins to dail after you put downthe handset in active hands freefunction, press the Green key (18)followed by the number.
MUTE FUNCTION
Press the Mute key (14) during aconversation.
In the viewer this message will bedisplayed.
The Red light will blink slowly.
To disable this function and recapturethe conversation again, press the Mutekey (14) again.
In the viewer this message will bedisplayed momentarily.
During the period while the Mute isactivated, you can use any of thefunctions that you would normally carryout with the taken handset down or theactive hands free function.
During a call it is possible to turn off the sound to the speaker so that the speakercannot listen to you. To activate it:
OPERADOR
MUTE ACTIVO
MUTE INACTIVO
FX
Grabar
R/A - aMute
AgendaRellamada
Pausa
X)))
DOMO Messages Hands Free18
LISTENING TO A CALL
When a call is received, the sound will be that of the pre-selected tone and volume.At the same time the Red light will be blinking.
To enter into conversation with the caller, pick up the handset or activate the handsfree function.
If you have requested the Caller Identification Service, you will see the telephonenumber of the person calling displayed in the viewer. For more information on thisservice, see Chapter 10.
HANDS FREE FUNCTION
The DOMO Messages Hands Free phone incorporates a speaker (15) and a micro-phone (12) that allows you to speak and listen to the caller without having to pick up
the handset. The X))) key (11) will toggle this option between active and disabled.
All the functions of the phone will remain active during the conversation in the handsfree way.
You can activate the hands free option
by pressing the X))) key (11) whilethe handset is operating in picked upmode.
The Red light shows the hands freemode is in operation, and you cancommunicate with the caller (to Seeremote 8) or begin a new call bymeans of the dialling procedures de-scribed previously (to See remote 4).
If during hands free conversation it isnecessary to pick up the handset, theviewer shows this message during thefollowing seconds.
If while maintaining a conversationusing the handset, you want to con-tinue the same one in hands free mode,
Activationof handsfree mode
Changinghands freemodeduringconversa-tion
MICROTELEFONO
FX
Grabar
R/A - aMute
AgendaRellamada
Pausa
X)))
DOMO Messages Hands Free 19
press the X))) key (11). The handset isdisabled and the conversationcontinues in the hands free mode. Theviewer will display this message aftera few seconds -
To return to using the handset, simplypress the X))) key again (11).
While in the hands free mode, you canend your conversation by pressings theX))) key (11). If however you are usingthe telephone with the handset pickedup, you should press the X))) key (11).Either way, the indicator light will goout.
During a conversation in hands freemode, you can adjust the volume ofthe speaker by pressing one of thecursor ÙÚ keys (20) until in the viewerthe message is displayed (Corre-sponding to the last level of recordedvolume).
Next you can increase the volume bypressing the cursor Ù key (20) ordiminish the volume by pressing thecursor Ú key (20).
During a conversation while using thehandset, you can adjust the volume ofthe headphone. To do this press oneof the cursor ÙÚ keys (20) until thismessage is displayed in the viewer.(Corresponding to the last level ofrecorded volume),
Next you can increase the volume bypressing the cursor Ù key (20) ordiminish the volume by pressing thecursor Ú key (20).
You will notice that the volumeadjustments of the speaker andheadphone are set independently.
Deactivat-ing thehands freemode whilein conversa-tion
Adjustingthe volumeof thespeaker
Adjustingthe volumeof thehandset
Å VOLUMEN: é 3 ê
X VOLUMEN: é 8 ê
MANOS LIBRES
FX
Grabar
R/A - aMute
AgendaRellamada
Pausa
X)))
FX
Grabar
R/A - aMute
AgendaRellamada
Pausa
X)))
DOMO Messages Hands Free20
When receiving the call, the numberof the caller is displayed.
If the caller’s number coincides withone of those stored in the Phonebook,and there is an associate name withthat number, the recorded name onlywill be displayed. When picking up thehandset or using the hands free mode,the number associated with that namewill be displayed. The hour and currentdate are also displayed, which can beviewed at a later time.
The number or name is displayed dur-ing the whole conversation, disappear-ing on hanging up the handset or disa-bling the hands free function, or if youcarry out another operation on thephone during the conversation.
There may be a number of reasonsfor the information not to be displayedin the viewer. They could be -
- The caller doesn’t want to be
identified.
- The identity of the caller cannot be
assertained (an example could be
international calls).
- The call is made from a public
telephone (from a different network).
With the handset picked up and withthe hands free function disabled, theviewer displays the hour and date, thetotal number of stored calls (receivedand outgoing), the number of newreceived calls from the last time it wasinspected, and the number of receivedcalls that have been repeated.
IDENTIFICATION OF CALL SERVICE
Requesting the Identification of Call service allows you to see in the viewer the call-ers number (or name). This number remains displayed before you answer the calland during it. It is necessary to have the Messages of Text (SMT) service activated.
Informationin theviewer(when theindicatorlight is notlit)
912397657
NUMERO PRIVADO
No NO DISPONIBLE
TELEF. PUBLICO
20:00 02 11 10 63
DOMO Messages Hands Free 21
When new calls are received the Redindicator light will flash to indicate acall is waiting to be answered.
The indicator light will switch offautomatically when the call isanswered or the caller rings-off.
The phone can store up to 50 calls(received and outgoing) and it canupdate them with the handset pickedup or with the hands free disabled oractivated.
Press the key ÙÚ (20) to movethrough the list of calls from the mostrecent to the oldest or vice versa.
The viewer will display -
* On the first line is -
- the record number in the list.
- if the call was outgoing orincoming, and if it is an assistedincoming call.
- Telephone number.
If the number coincides with one ofthose stored in the Phonebook andwhere there is an associate name, itwill display the name first, and laterthe number after a few seconds.
If the number displayed is longer thanthat which will fit in the viewer, thesymbols × or Ø , will be shownindicating that you can assess theremainder by using those keys.
Viewing theincomingandoutgoingcalls.
â
Contestador Mensajes Desactivar
Aceptar Salir
LL.Espera Desvio LL.a Tres
02 ì 917404119
02! î 917404119
02PPPPP î 917404119
DOMO Messages Hands Free22
On the second line of the viewer -- Hours and dates (day and month)
the time the call was received or acall was made.
- Indication of a repeated call.
If you want to make a call to any ofthe stored numbers with the handsetpicked up or in activate hands freefunction mode, press the Marcar/Menú key (21).
The numbers on those that you havedialled or assisted calls, are shownwith a tick symbol PPPPP to the right of thecaller.
To return to the normal display, pressthe Desactivar/Salir key (4) followedby a Ù or Ú key (20) and allow timefor it to happen.
Deleting Call records -
Whilst looking at the Call entries in theviewer, you can erase the current en-try by pressing the Borrar key (17). Itwill be necessary to confirm the dele-tion of the entry by pressing the # key.
Deleting all Call records -
With the handset picked up and handsfree function disabled, press the Borrarkey (17)
If call entries are not currently beingviewed, and are not displayed in theviewer, confirmation is requested withthe # key.
If you have not viewed all the receivedcalls, you won’t be able to erase them.
If you want to cancel the operation,press the Desactivar/Salir key (4).
LL. SIN REVISAR
CONFIRMAR CON #
BORRANDO...
01 PPPPP îFRANCISCO
DeletingCalls
DOMO Messages Hands Free 23
Activation
With the handset picked up or thehands free function activated, press theDesvio key (23).
Type the number that is to receive yourdiverted calls.
Press the Desvio key again (23).
While the diversion number is acti-vated, an icon will be displayed in theviewer.
When picking up the handset or in thehands free mode, the numberdisplayed will be the one that the callshave been diverted.
While this service is activated, youcannot receive Text Messages (SMT).
Deactivation
With the handset lifted or the handsfree function activated -
Press the Desactivar/Salir key (4).
Press the Desvio key (23).
The icon will cease to be displayed inthe viewer.
Make aRecord in thePhonebookfrom the listof receivedcalls
DivertingIncomingCalls
PULSE No + DESVIO
PULSE No + DESVIO
The following Supplementary Services have to be requested before they can becomeavailable.
The procedure is described onpage 12.
Desvio
DESV. O CONTES?
DESVIO INACTIVO
SUPPLEMENTARY SERVICES
DOMO Messages Hands Free24
Activation
Pick up the handset or using the handsfree function -
Press the Contestador key (2).
The Answering Machine icon will bedisplayed in the viewer.
Desactivacion
Pick up the handset or using the handsfree function -
Press the Desactivar/Salir key (4).
Press the Contestador key (2).
The Answer Machine icon will ceaseto be displayed.
If you have received calls andmessages that were stored in theAnswering Machine, the indicator lightwill be lit in the viewer and a suitablemessage will be displayed (if thetelephone network provides one).
To listen to messages -
Pick up the handset or using the handsfree function, press the Mensajes/Aceptar key (3).
In the viewer this message appears -
IMPORTANT: The Redirect and Answering Machine can only be activated ordeactivated from your own DOMO Hands Free telephone. If you attempt to activateand deactivate from different telephone or by means of the direct dialling codes ofperformance from a keyboard of the services, the telephone viewer will not indicatethe correct situation of the service. Also if some failure of the telephone networktakes place during the selection of these services, once again the viewer will notshown the correct situation.
ANSWERINGMACHINESERVICE
ACCESSINGtheANSWERINGMACHINE
CONTEST.ACTIVO
DESV. O CONTES?
CONTES. INACTIVO
MENSAJES VOZ
OIR MENSAJES
To change the language of this service to English - see page 41.
DOMO Messages Hands Free 25
The Indicator Light will switch off aftera certain time when a messages isreceived from another telephone.
During a conversation you can receivea second call. You will hear tonessuperimposed over your conversationand the viewer will display the callersnumber (if available from the telephonenetwork and providing CallIdentification has been requested).
To take the call –
Press the Ll Espera key (22). Wait amoment.
In the viewer this message will bedisplayed,
These words will now be displayed -
To get back to the first caller, press theLl Espera key (22). Wait a moment.
Pressing this key again will allow youto talk with alternate callers.
To end the active conversation -
Press the Desactivar/Salir key (4)
Press the Ll Espera key (22). Wait amoment.
You can have a conversation with twopeople on different lines.
To enter into a three-way conversationduring a call -
Press the LI. a Tres key (5).
Type the second speaker’s number.
Once in conversation with the secondperson, press LI. a Tres again (5).
CALLWAITING
MAKING ATHREE-WAYCALL
LLAM. RETENIDA
PULSE LL. ESPERA
PULSE NUMERO
Llamada Retenida
DOMO Messages Hands Free26
In the viewer this message will bedisplayed -
together with these words -
The telephone network will confirmthat the function has been activatedwith a periodic tone.
To conclude the three-way call, hangup the handset or disable the handsfree function.
At any time you can separate the twoconversations -
Press the Ll Espera key (22) and waita moment.
Each press of the Ll Espera key (22)will toggle between the other callers.
If during a communication you receivea second call, you can enter into athree-way conversation -
After pressing the Ll Espera key (22),wait a moment.
Press the Ll a Tres key (5).
The process is the same as in theprevious case.
Once separated, the two conversa-tions can completed with the one thatis in course -
Press the Desactivar/Salir key (4).
Press the Ll Espera key (22) and waita moment.
LLAM. A TRES
LLAM. RETENIDA
LLAM. RETENIDA
LLAMADA A TRES
PULSE LL. ESPERA
Llamada a Tres
DOMO Messages Hands Free 27
The DOMO Hands Free Messages telephone allows you to use the Text Messagingservice provided by the telephone network. This allows for -
- Receiving text messages (SMT) coming from other fixed terminals or mobilesor from email addresses (*).
- Send text messages (SMT) to other fixed or mobile phones, and to emailaddresses and Fax telephones (*).
(*) the telephone network may not offer all these options.
If two or more telephones are connected to the same line, to text messages, eachextension must be given a different extension number which must be between 1and 9. As standard, the DOMO Hands Free Messages telephone is programmed atthe factory with the extension as 1. If it is necessary to change this number, see thesection on Change of Extension on page 27.
PLEASE NOTE: The relative information regarding the extension number for textmessages purposes is displayed in the viewer in the following way -
- If the extension number appears in parenthesis,the phone cannot receive messages as anothertelephone exists with the same extension number.If it is the only extension with that number, theextension number will be displayed withoutparenthesis.
- If the extension number appears withoutparenthesis, the telephone you will receivemessages on will be number 1
Because each telephone can be used for more than an one user, the DOME HandsFree Messages telephone also offers the option to receive and to send private mes-sages, to those 5 recipients that you will only have given high priority to. For moreinformation, consult the section on remote Private Mail on page 29.
To activate and configure the Messaging Service, use the following instructions -
All the performances in the Service of Messages of Text (SMT) are carried outwith the handset down and the hands free function disabled. The Mensajes/Aceptar key (3) allows you to see the menu of Text Messages (SMT) and alsoconfirms any action needed. The cursor keys Ù and Ú (20) allow you to navi-gate through the different menu options. To return to the previous screen, pressthe Desactivar/Salir key (4).
TEXT MESSAGING (SMT)
TELEFONICA (1)
TELEFONICA 1
TELEFONICA 1
DOMO Messages Hands Free28
To Activate the Text MessagingService (SMT)
With the handset down and the handsfree function disabled, press theMensajes/Aceptar key (3) to view thetext messaging menu. Next press thecursor keys Ù and Ú (20) until in theviewer the following message isdisplayed -
Only on the first occasion that youpress the Mensajes/Aceptar key (3)will you be offered this option.
To activate the Service, press theMensajes/Aceptar key (3) and youwill be requested to type the extensionnumber of the terminal.
During this request, the last storedextension number will be displayed. Ifa terminal with that number alreadyexists the terminal will suggest anothernumber. Press the Mensajes/Aceptarkey (3) and a message will bedisplayed showing the proposedextension number.
To confirm this extension number,press the Mensajes/Aceptar key (3)again to continue.
Wait until the viewer displays thismessage –
This message will remain displayed forseveral seconds.
In the case of a problem that doesn’tallow to activation of the service, anerror message (see page 37) will bedisplayed for several seconds. You willthen be able to retry the operation bypressing the Mensajes/Aceptar key(3).
ToACTIVATE /DISABLEthe TextMessagingService(SMT)
× Ø× Ø× Ø× Ø× Ø ACTIVAR SMT
EXTENSION: ¿1?
ACTIVAR EXT (1)
ESPERE
ACTIVADO
TELEFONICA (1)
ACTIVAR (1)
DOMO Messages Hands Free 29
If at any time before confirming theactivation (detailed below), you wantto stop the process, press theDesactivar/Salir key (4).
If you want to connect your DOMOFree Hands Messages telephone tothe Text Messaging Service (SMT)to a different telephone extensionnumber, it must first bedisconnected from the previousextension number.
Deactivation of Service of Messagesof Text (SMT)
With the handset down and the handsfree function disabled, press theMensajes/Aceptar key (3). Next pressthe cursor keys Ù and Ú (20) untilthe viewer displays this message -
If you want to disable the Service,press the Mensajes/Aceptar key (3)
Wait until the viewer displays thismessage -
This message will remain for severalseconds.
In the case of a problem that doesn’tallow you to activate the service, theviewer will show an error message(page 37) for several seconds, followedby this message -
You will be able to retry the operationby pressing the Mensajes/Aceptarkey (3).
If you use more than one extension onthe same telephone line for TextMessaging, each extension must havea different extension number, between1 and 9.
CHANGINGTHEEXTENSIONNUMBER
DESACTIVAR SMT
ESPERE...
DESACTIVADO
× Ø× Ø× Ø× Ø× Ø DESACTIVAR SMT
DOMO Messages Hands Free30
If you have already activated theText Messaging Service (SMT)and you need to change theextension number, first you mustfirst disable the service from thecurrent number before proceedingwith the change.
To change the extension numberfollow these instructions -
With the handset down and the handsfree function disabled, press theMensajes/Aceptar key (3). Press thecursor keys Ù and Ú (20) until thisoption is displayed in the viewer -
Press the Mensajes/Aceptar key (3)and you will be requested to assign anew number.
The last stored extension number willbe displayed in the viewer. If anextension already exists with thenumber requested, the telephone willoffer an alternative number. Press theMensajes/Aceptar key (3) and amessage will appear showing theproposed extension number.
To confirm the new number, press theMensajes/Aceptar key (3).
Wait until this message is displayedin the viewer -
The message will remain displayed forseveral seconds.
If there is a problem that doesn’t allowactivation of the service, an errormessage (page 37) will be displayedfor several seconds. You will be ableto retry the operation by pressing theMensajes/Aceptar key (3).
EXTENSION: ¿1?
ACTIVAR EXT (2)
ESPERE...
TELEFONICA (2)
ACTIVAR (2)
ACTIVADO
× Ø× Ø× Ø× Ø× Ø CAMBIAR EXTENS.
DOMO Messages Hands Free 31
The DOMO Hands Free Messagestelephone offers the option to receiveand send up to 5 ‘private mail’messages, to those who have accessto such mail, and who have beendefined using the following parameters -
Name: Identification of a user withprivate mail. This parameter can consistof 1, 2, 3 or 4 characters.
Pin Number: This allows a user ofprivate mail to read messages havingfirst keyed in an easy to remembersecurity number. This parameter isnumeric and consists of 4 digits.
Next, you can see how to create, editand erase Private Mail.
With the handset down and the handsfree function disabled, press theMensajes/Aceptar key (3) to view themenu of text messages (SMT). Nextpress the cursor keys Ù and Ú (20) untilthe viewer displays this message -
To continue, press the Mensajes/Aceptar key (3) and this message willbe displayed -
Again press the Mensajes/Aceptar key(3) and you will be requested to typethe user’s name. This is done using thecharacters on the numeric keyboard (7),This can consist of 1, 2,3 or 4characters. When complete, press theMensajes/Aceptar key (3). If the namealready exists, the viewer will display -
You will then be requested to enter theuser’s name again.
Next enter the security numberconsisting of 4 digits. Press theMensajes/Aceptar key (3). Oncecreated, it will be displayed again.
To createuser
PRIVATEMAIL
× Ø× Ø× Ø× Ø× Ø CORREO PRIVADO
× Ø× Ø× Ø× Ø× Ø CREAR USUARIO
× Ø× Ø× Ø× Ø× Ø CORREO PRIVADO
¿NOMBRE?
JOSE
ERROR: YA EXISTE
¿CLAVE?
1234
DOMO Messages Hands Free32
To modify the name and/or the keyassociated to a recipient of privatemail, access the submenu ‘CorreoPrivado’ using the cursor keys Ù andÚ (20) and press the Mensaje/Aceptar key (3) and follow the instruc-tions for remote ‘Correo Privado’ onpage 28.
When displayed in the viewer, pressthe Mensajes/Aceptar key (3).
Next the viewer will display a list ofnames that they have already beencreated and stored. Using the cursorkeys Ù and Ú (20), select the name tobe modified, and when found, pressthe Mensajes/Aceptar key (3).
Change the name as required usingthe characters on the numerickeyboard (7), and press the Mensaje/Aceptar key (3) when complete.
If you need to erase all the charactersof the name, use the Borrar key (17).Type the new name using the charac-ters on the numeric keyboard (7) andpress the Mensajes/Aceptar key (3).
The modified name will now bedisplayed in the viewer.
The modified name will be displayedin the viewer under the associated key.You can modify it, erase the currentlydisplayed name and add a new name,following the same procedure.
To confirm the modification, press theMensaje/Aceptar key (3).
To erase a user name, from the ‘CorreoPrivado’ menu (see page 29), pressthe Mensajes/Aceptar key (3). Usingthe cursor keys Ù and Ú (20) accessthe ‘Borrar Usuario’ option and pressthe Mensajes/Aceptar key (3).
To modify auser name
To delete auser name
× Ø× Ø× Ø× Ø× Ø MODIF. USUARIO
¿CLAVE?
1234
JOSE
JUAN
1234
4321
× Ø× Ø× Ø× Ø× Ø BORRAR USUARIO
DOMO Messages Hands Free 33
Access the list of names that they havealready been created and stored. Movethrough the list using the cursor keysÙ and Ú (20) and select the user nameto be deleted.
Press the Mensajes/Aceptar key (3).A confirmation key will be requested.Type this key and press the Mensajes/Aceptar key (3) again.
The actions you take will be displayedin the viewer.
If you type an incorrect confirmationkey, this massage will be displayed inthe viewer -
If you make a second mistake, theoperation will fail and this message willbe displayed -
Attempting a third try will erase all themessages associated with the name..
If you have forgotten the key as-sociated with the name, anemergency option is offered.Note - all messages associatedwith that name will also be
erased. When you are requested to enterthe key, type it 3 times.
With the handset down and the handsfree function disabled, press theMensajes/Aceptar key (3) to accessthe menu of text messages (SMT).Next press the cursor keys Ù and Ú(20) until the name required isdisplayed in the viewer.
Press the Mensajes/Aceptar key (3)and next type the message text usingthe characters on the numeric key-board (7). A messages can be up to640 characters in total, in blocks of 160characters as indicated in the corner
SENDING AMESSAGE
!
¿CLAVE?
1234
BARRANDO
CLAVE ERRONEA
OTRO FALLO
HOLA_
× Ø× Ø× Ø× Ø× Ø ENVIAR / EDITAR
DOMO Messages Hands Free34
of the viewer (e.g. 1 of 4). Once youhave typed over 160 characters, adouble envelope will also be displayedin the main part of viewer. The assign-ment of characters and symbols onthe keyboard are as follows -
Key 1: 1 . - > 1 i Key 7: P Q R S 7
Key 2: A B C 2 " Ç Key 8: T U V 8 ? ü
Key 3: D E F 3 $ Key 9: W X Y Z 9 ¿
Key 4: G H I 4 % Key *: * + ; ) ( •
Key 5: J K L 5 & Key 0: @ _ , ’ / o
Key 6: M N Ñ 0 6 Key #: (Space) # : = <
You can change between uppercaseand lowercase (and vice versa) bypressing the R/A-a key (8).
If correct a mistake, press the Borrarkey (17), which will delete the lastentered character.
If a message cannot be sent immedi-ately, it will be stored as indicated inthe viewer by a flashing envelope *****.
The DOMO Hands Free Messagestelephone allows you to send textmessages (SMT), e-mail and faxes.Once you have typed a message, ormodified an existing one, pressingMensajes/Aceptar key (3) will allowyou to select the despatch format forthe message.
Text Messaging (SMT) is the defaultoption with E-MAIL and FAX beingaccessed by using the Ù and Ú keys(20). The following instructions detailshow to proceed for each of theseoptions.
1. - To send a Text Message (SMT)
When this message is displayed in theviewer -
Choosingthedespatchformat(Message,E-Mail orFax)
× Ø× Ø× Ø× Ø× Ø ENVIAR MENSAJE
× Ø× Ø× Ø× Ø× Ø ENVIAR MENSAJE
DOMO Messages Hands Free 35
Press the Mensajes/Aceptar key (3).The user’s telephone number will berequested. Type the number using thenumeric keyboard (7) orselect it from the Phone Book bypressing the Agenda key (9). Press theMensajes/Aceptar key (3) again.
Next you will be asked (optionally) totype the user’s name (for purposes ofcreating a Private Message). Press theMensajes/Aceptar key (3) anyway.Next the destination extension will berequested (optional - if there is morethan one extension on the telephonenumber). Press the Mensajes/Aceptar key (3) anyway. The messagewill be displayed in the viewer.
To complete despatch of the message,press the Mensajes/Aceptar key (3).Otherwise, press the cursor keys Ù andÚ (20) until an M is displayed.
Press the Mensajes/Aceptar key (3)and use the cursor keys Ù and Ú (20)to choose between the options to keepor erase. Press the Mensajes/Aceptarkey (3) to confirm the selected option.
2. - To send an E-mail
When the E-mail option is displayedin the viewer, press the Mensajes/Aceptar key (3). Type the emailaddress and press the Mensajes/Aceptar key (3) again.
This message will be displayed -
To send the E-mail, press theMensajes/Aceptar key (3) and thismessage will be displayed -
If you decide not to send the e-mail,press the cursor keys Ù and Ú (20) untilthis message is displayed -
DESTINATARIO
× Ø× Ø× Ø× Ø× Ø ENVIAR: NO
¿NOMBRE?
¿EXTENSION?
ENVIANDO
× Ø× Ø× Ø× Ø× Ø ENVIAR: SI
ENVIAR: NO
× Ø× Ø× Ø× Ø× Ø ENVIAR E-MAIL
× Ø× Ø× Ø× Ø× Ø ENVIAR: SI
DESTINATARIO
ENVIANDO
DOMO Messages Hands Free36
Press the Mensajes/Aceptar key (3)and choose between the options tokeep or erase. Press the Mensajes/Aceptar key (3) again to confirm.
3. - To send a Fax
When this message is displayed -
Press the Mensajes/Aceptar key (3).First the subject title will be requested(optional). Type this, if required, in upto 255 characters and press theMensajes/Aceptar key (3) anyway.
Next, the addressee’s number will berequested. Type it using the characterson the numeric keyboard (7) or selectit from the Phone Book by pressingthe Agenda key (9) and pressing theMensajes/Aceptar key again (3).
When this message is displayed -
To send the Fax, press the Mensajes/Aceptar key (3). See this message -
If you decide not to send the Fax, usethe cursor keys Ù and Ú until thismessage is displayed -
Press the Mensajes/Aceptar key (3),and select the option to keep or toerase the message by using cursor Ùand Ú keys (20) and pressing theMensajes/Aceptar key (3) to confirmthe selected option.
If a message cannot be delivered, youwill receive a message indicating thereason (disabled service, agreementdoesn’t exist with the operator, theextension doesn’t exist, etc.).
At any time during the above process,you can cancel the operation bypressing the Desactivar/Salir key (4).
× Ø× Ø× Ø× Ø× Ø ENVIAR: NO
¿ASUNTO?
× Ø× Ø× Ø× Ø× Ø ENVIAR FAX
DESTINATATIO
ENVIANDO...
× Ø× Ø× Ø× Ø× Ø ENVIAR: SI
DOMO Messages Hands Free 37
When a text message is about to bereceived, the telephone will produce atone and display this message -
When the message has been receivedthe telephone gives a second tone,indicating that the message has beenreceived correctly, and this messagewill be displayed -
When a communication errorhappens, the message will be -
The existence of new messages isindicated in the viewer with flashingenvelope *****.
To read messages, press theMensajes/Aceptar key (3) with thehandset down and the hands freefunction disabled. The display will be -
Information about the message will belisted -
1. The position of the message in thelist.
2. Symbols ! or üüüüü indicate if it is a newor saved message, respectively.
3. The characters î or ì shows if it isan incoming or outgoing message.
4. Next,- if the message is incoming, and
not private, the sender’s numberor the name if it is in the PhoneBook.
- if it is a private incoming message,private user’s name will appear inparenthesis.
- if the message is outgoing, thedestination will appear which thatcan be, a telephone number oruser’s name if it is in the PhoneBook, a fax number or an Internetaddress.
× Ø× Ø× Ø× Ø× Ø LEER
ESPERE...
RECIBIDO
ERROR RECEPCION
MENSAJES TEXTO
01! î ALMUDENA
01! î 91445566
01! î ALMUDENA
01! î (ALMU)
02! üüüüü î 91445566
02! üüüüü î ROSA ROMERO
RECEIVINGMESSAGES
READINGMESSAGES
DOMO Messages Hands Free38
Pressing the cursor keys Ù and Ú (20)you can move through the list ofmessages from the most recent to theoldest or vice versa.
Having selected a message, press theMensajes/Aceptar key (3) to view thetext and with the cursor keys Ù and Ú(20) to access it.
If it is a private message, in the finderthis message will be displayed -
Type the security key (of 4 digits) andpress the Mensajes/Aceptar key (3).If the key is correct, the number (orname) will be displayed, followed bythe text. Move through the text usingthe cursor keys Ù and Ú (20).
To leave the message, press theDesactivar/Salir key (4).
If the message is incoming (received),press the Mensajes/Aceptar key (3)to displayed in the viewer, theseoptions - to Respond, to Forward, toErase and to Keep.
For outgoing messages, the optionsare - to Forward, to Erase and to Keep.
Using the cursor keys Ù and Ú (20),you can access any of them.
When this message is displayed –(as indicated in the section on readingMessages on page 35), press theMensajes/Aceptar key (3). Torespond to the message, proceed asdetailed on page 32.
When this message is displayed –(as indicated in the section on readingMessages page 35), press theMensajes/Aceptar key (3),and youcan modify the message content.
To respondto receivedmessages
To forwardmessages
× Ø× Ø× Ø× Ø× Ø REENVIAR
01! üüüüü î (PEPE)
¿CLAVE?
1234
× Ø× Ø× Ø× Ø× Ø RESPONDER
× Ø× Ø× Ø× Ø× Ø REENVIAR
× Ø× Ø× Ø× Ø× Ø BORRAR
× Ø× Ø× Ø× Ø× Ø GUARDAR
× Ø× Ø× Ø× Ø× Ø RESPONDER
DOMO Messages Hands Free 39
Press the Mensajes/Aceptar key (3)and proceed as indicated in the‘Despatch of Messages’ on page 32.
On seeing this message -(as indicated in the section on ReadingMessages on page 35), press theMensajes/Aceptar key (3) and themessage will be deleted.
From the list of messages that havebeen ‘Read’, access the messagerequired and press the Borrar key (17)to Erase it. Confirm by pressing the #key. You cannot erase messages thathave not been read.
On seeing this message -(as is indicated in the section onReading Messages on page 35), pressthe Mensajes/Aceptar key (3), and itwill store the message.
During the activation or deactivationof the text messaging service (SMT),as well as during the despatch orreception of a text message, thefollowing errors may occur -
1. – Despatch ErrorThis error appears if the message hasnot been possible to despatch becauseof communication failure.
In the viewer this message will bedisplayed for a few seconds.
2. Error. Service not activatedThis error happens when you try tosend a text message without firstactivating the service. Displayed in theviewer will be -
3. - Destination ErrorWhen the addressee doesn’t have thetext messaging service activated. Themessage in the viewer will be -
To erasemessages
To keepmessages
Error types
ERROR ENVIO
× Ø× Ø× Ø× Ø× Ø BORRAR
BORRANDO
CONFIRME CON #
BORRANDO
× Ø× Ø× Ø× Ø× Ø GUARDAR
GUARANDO
ERROR, ACTIVESE
ERROR DESTINO
DOMO Messages Hands Free40
4.- Error receptionIf during the reception of the messagean communication error happens, thetelephone will display this message -
DISTRIBUTION LISTS FOR MESSAGING
IMPORTANT: This option is only available if supplied by the telephone network.
The distribution list allows sending a message to several different destinations.
The necessary parameters in a ‘distribution group’ are -
- Name of the distribution group.
- Destinations list - these are the destinations to which the message will be sent.
The DOMO Hands Free Messages telephone will let you configure the group namesand the destinations.
Once defined, the process is automatic, and will send the message to all the recipientsin the distribution group.
As explained below, there can be many groups and each allow for the operator tocreate, to erase, to include, to remove, to view and to send entries. They are carriedout by means of despatch of specific messages or commands to the telephone number4545 that will not be charged for. The editing of these messages sould be carried outin UPPERCASE characters.
To create a group, type the followingmessage using the dialling keys (7) -
##CRG#<Group Name> ##
After creating the group, you will besent a text message stating that therequest has been accepted -
It has been created < Group Name >.
Depending on the destination, themessage format should be -
Creating agroup
Adding aDestinationto a group
##CRG#TRABAJO##
SE HA CREADO
TRABAJO
##A1#TRABAJO*91396 751*1*INMA##
ERROR RECEPCION
DOMO Messages Hands Free 41
* ##AI#<Group_Name>*<Telephone_No>
* < No_of_terminal>*<Security_Code> ##
* ##AEI#<Group_Name>*<direction_ E-
mail>##
After including the new member in thegroup, you will receive a text messageinforming you that the request hasbeen accepted - “The member
<Datos_del_integrante> has been included in
<Group_Name>.”
The format message will vary,according to the type of destination -
* ##B1#<Group_Name>*<Telephone_No>
* <No_of_terminal>*<Security_Code>##
* ##BEI#<Group_Name>*<direction_E-
mail>##
After erasing the member of the group,you will be sent a text message con-firming the request has been accepted– “The member <Group_Data> has been
removed <Group_Name>.”
If you want to change the data of amember of a group, and so as not tocomplicate matters with unnecessarycommands, you should -
1. Remove the group to which themember belongs.
2. Add to the group the member withthe changed data.
Introduce the following message -
##BG#<Group_Name>##
This action will erase all the membersof the group and the group name. Next,you will be sent a text messageinforming you that the request hasbeen accepted – “This has been erased
<Group_Name>.”
To erasemember ofa group
To change amember ofa group
To erase agroup
##AE1TRABAJO*INMA
@HOTMAIL.COM##
##BG#TRABAJO##
SE HA BORRADO
TRABAJO
EL INTEGRANTE INMA SE
HA INCLUIDO EN RABAJO
##B1#TRABAJO*91396
751*1*INMA##
EL INTEGRANTE INMA SE
HA BORRADO DE TRABAJO
##AE1TRABAJO*INMA
@HOTMAIL.COM##
DOMO Messages Hands Free42
The message format should be -
##CG##
The confirmation of the requestedaction will consist of a text messagewith the names of the groups –“The groups are: <Group_Name> *
<Group_Name_2> * … *
<Group_Name_N>.
Type the following message -
##CI#<Group_Name>##
You will receive a message in whichwill include the members of group -“The members of <Group_Name> are:
<data-of-member_1> *
<data_of_member_2> *... *
<data_of_member_N>.
The fields that make up the data ofthe members, are separated with thesymbols “;”.
To send a message, type the followingformat -
##E#<Group_Name>##<Message_Text>
By following these actions you will besending the message included in thecommand <Message_Text> to all themembers in the group.
To view thedefinedgroups
To viewmembers ofa group
To send amessage toa group
If when sending a message, ERROR ENVIO is displayed in the viewer, consult theTroubleshooting section of this manual. If there is another reason for the error,a different message will be displayed, allowing you another attempt to send themessage.
##CG##
¿NOMBRE?
SUS GRUPOS SON:
TRABAJO*AMIGOS*
FUTBOL
LOS INTEGRANTES DE
TRABAJO SON:
91396751;INMA*91255180;
FRANCIS*91397657;ROSA.
##E#TRABAJO##
MANANA REUNION A
LAS 11H
DOMO Messages Hands Free 43
CHANGE ANSWERING SERVICE LANGUAGE TO ENGLISH
Pick up the DOMO handset andpress the key Contestador .
When this message will bedisplayed in the viewer, replacethe handset.
Now complete the followingsteps -
1. Lift DOMO handset and pressthe Mensajes key.
2. When the message you hearends, press No.1 on thekeypad.
3. When the next message youhear ends, press No.4 on thekeypad.
4. Enter a four digit code e.g.0000 (You must rememberthis code).
5. When the next message youhear ends, press No.3 on thekeypad.
6. When the next message youhear ends, press No.1 on thekeypad.
7. Finally, when the next mes-sage ends, press No.1 again.
8. Replace the handset.
When the phone rings and you areunable to answer, the answermachine message will cut in after5 rings.
To retrieve messages, pick up thehandset and press the Mensajeskey. Follow the instructions which
will now be in English.
Activo
DOMO Messages Hands Free44
TROUBLESHOOTING
PROBLEM
If when sending a message, E-mail or fax,the message ERROR ENVIO is displayed.
If, when sending a message, E-mail or fax,one of these messages is displayed –ERROR, ACTIVESE or ERROR DESTINO
When pressing the Messages key themessage POCA MEMORIA BORREMENSAJES is displayed.
If when trying to create a private list, themessage MEMORIA LLENA is displayed.
The Viewer remains blank.
The redirection symbol is not displayed.
Nothing is displayed in the viewer when I pickup the handset.
The telephone works perfectly but the viewershows nothing.
The ring (tone) is too quiet.
The viewer doesn’t show the callers identifi-cation.
The telephone doesn’t respond to the actionsmade by the user, as requested. Example:pressing keys, etc.
SOLUTION
Try pressing the Mensaje/Aceptar key (3) or toCancel, press the cursor keys. You will be ableto erase or to keep the message, E-mail or fax.
In the first case you have not activated the TextMessaging service. ERROR DESTINO appearsif the addressee has not activated the service. Ineither case, use the options to Keep the messageand send it when the errors have been retified.
The telephone has used up all available memory.Erase messages no longer necessary. Until thisis done new messages cannot be sent orreceived.
This message indicates that you already havethe maximum number of 5 groups (lists). To cre-ate a new one you must first delete one or moreof those already created.
Reinstall and connect the phone directly in thePTR. If the problem persists, contact Telefónica.
The redirection was not really activated and acall was received. Activate the deviation again.
Make sure the cord to handset is correctly con-nected.
Modify the contrast.
Change the volume.
Check that you have activated the Identificationof Calls service.
Where it accepts actions, but the data, Phone Book,and other data stored in the telephone at factoryconfiguration, do not respond.
Hold down the 1 key followed by the 3key, pick up the handset, stop topressing the keys and then put thehandset down.!
DOMO Messages Hands Free 45
MAINTENANCE
The DOMO Hands Free Message telephone doesn’t require any special maintenance.To clean use a damp cloth. Do not use abrasives or solvents for cleaning as thesecould damage the equipment. Avoid blows and/or possible falls to the floor, and donot locate near sources of heat or exposed directly to the sun.
TECHNICAL SPECIFICATIONS
Minimum isolation resistance between earth and accessible parts 100 M
Minimum dielectric strength 500V
Return losses > 14 dB
Codes of dialling frequency CCITT Q.23 Time Emission 70ms ± 5% Time Pauses 140ms ± 5%
Duration of the temporised opening 100ms ± 5%
Time of pause between dialling 25± 5%
Time of maintenance of the Phone Book, lists of incoming calls,lists of outgoing calls with the disconnected telephone limited
Code call-up identification FSK ETSI 300 778-1 and 2
Size available to list of callers: memory/characters/digits 50/15/24
Size available to the Phone Book: memory/characters/digits 50/15/24
Size available to list of messages: No. of Messages/Characters 50/80 or 25/160
Acoustic level of the call signal (high level) 81 dBPWL
Total weight 6oo gr
External size W x H x D: 226 x 63 x 149 mm
Operating temperature O° and 55°C
Storage temperature -2O° and 70°C
Maximum humidity 90%
DOMO Messages Hands Free46
GUARANTEE CERTIFICATE
CERTIFICATE OF GUARANTEE
Telefónica de España S.A.U.
Gran Via, 28 Madrid
Details of Customer
Aquired from
Customers Name
Address
Town
Province
Post Code
Telephone Number
IDENTIFICATION DETAILS TYPE OF GUARANTEE
Type - Serial No.
DOMO Mensajes
Manos Libres
See conditions ofguarantee overleaf
DOMO Messages Hands Free 47
CONDITIONS OF GUARANTEE
The DOMO covered by this guarantee has been manufactured to normal standard of quality,and has been subject to approval tests.
In the event of non-conformity to the contract, the user will be able to exercise his rightsunder the conditions and fixed terms detailed under Law 2312003 of Covenants of ownershipfor the Sale of Goods of use, the right to a repair, substitution, reduction of the price orchange of contract. It will be necessary for the user to provide an invoice or delivery note.
The user will be informed how the substitution of the Domo will take place to conform tolegal requirements.
Telephone 1002 and 1004
The substitution for a Domo, which has been subject to a mishap, is not included in theguarantee.
A mishap includes the incorrect use or treatment, or incorrect manipulations and installationsafter the sale from TELEFÓNICA OF SPAIN.
Also not included are mishaps caused by catastrophic causes (fire, floods... ), atmosphericproblems (lightning, etc.), blows and drops.
In the case of having a maintenance contract with Telefónica of Spain, you will geton-site attention from engineers.
CONDITIONS OF GUARANTEE
This manual translated and produced by John H [email protected]