System On Module iW-RainboW-G24M Arria 10 SoC …...intelligence equipment, Diagnostic medical imaging equipment, Wireless infrastructure equipment, Compute and storage equipment,

System On Module iW-RainboW-G24M

Arria 10 SoC Module

www.iwavesystems.com

iW-RainboW-G24M

HIGHLIGHTS

SPECIFICATIONS

iWave’s Arria 10 SoC System on Module is based on the Arria 10 SX family device with F34 package. The module is equipped with 32-bit DDR4 memory support for HPS with optional ECC and 64-bit DDR4 support for FPGA. All the IOs and high speed transceiver blocks will be available on the SOM board to board connector.

APPLICATIONS: Test and measurement equipment, Control and

intelligence equipment, Diagnostic medical imaging equipment, Wireless infrastructure equipment, Compute and storage equipment, Broadcast and distribution equipment.

SOC: Arria10 SoC

Dual Core, Cortex - A9 CPU @ 1.5GHz

SX270 (10AS027) FPGA Fabric

35mm x 35mm F34 Package

Memory:

1GB DDR4 with optional ECC for HPS

1GB SLC NAND Flash for HPS

Optional 64-bit DDR4 for FPGA

QSPI Flash for FPGA (Optional)

Communication:

10/100/100 Ethernet PHY For HPS

USB2.0 transceiver for HPS UTMI

Power Supply:

5V through SOM B2B connectors

Temperature support:

-40°C to +85°C Industrial

Dual 240 Pin Board to Board Connector:

Arria10 SoC HPS IO interfaces:

Gigabit Ethernet x 1 Port

USB 2.0 OTG x 1 Port

SD (4bit) x 1 Port

SPI x 1 Port, I2C x 1 Port

Full Function UART x 1 Port

Console UART, GPIOs – 4 Nos

Arria10 SoC FPGA IO interfaces:

24 high-speed transceivers

76LVDS/152SE FPGA IOs

8LVDS/8SE General purpose clock outputs

7LVDS/7SE General purpose clock inputs

Headers: HPS/FPGA JTAG, FPGA AS headers

OS Support: Linux 4.1.22

Form Factor: 95mm x 75mm

Arria10 SOC & FPGA device compatibility

SX270, SX320, SX480, SX570, Sx660

24 high speed transceivers @ 17.4Gbps

Up to 76LVDS/152SE FPGA IOs

8LVDS/8SE General purpose clock outputs

7LVDS/7SE General purpose clock inputs

64 - Bit DDR4 support for FPGA

Dual 240 Pin Board to Board Connector

Variable IO voltage support

Industrial Grade operation

Gx270, GX320, GX480, GX570, Gx660,

GX900, Gx1150

OS SUPPORT

Linux 4.1.22

Arria 10 SoC SOM - BLOCK DIAGRAM

OPTIONAL KITS/ModulesDELIVERABLES

Arria 10 SoC SOM Arria 10 SoC Development Kit

Board Support PackageUser Manual

CUSTOM DEVELOPMENT

BSP Development/OS PortingCustom SOM/Carrier Development Custom Application/GUI Development Design Review and Support

Ordering the Arria 10 SoC SOM The SOM Module can be ordered online from the iWave Websitehttp://www.iwavesystems.com/webforms

iWave Systems Tech. Pvt. Ltd.,th nd7/B, 29 Main, BTM Layout 2 Stage,

Bangalore-560076, India. Ph:+91-80-26683700, 26786245Email: [email protected]

iWave Japan, Inc.8F-B, Kannai Sumiyoshi Building,3-29, Sumiyoshi-cho, Naka-ku, Yokohama, Kanagawa, Japan.Ph: +81-45-227-7626Email: [email protected]

iW-G

24M

-BR

-R1.3

Note: iWave reserves the right to change these specifications without notice as part of iWave’scontinuous effort to meet the best in breed specification. The registered trademarks are proprietaryof their respective owners.

*Optional items not included in the standard deliverables.

ple SOMs based on ARMNXP, Intel Atom, Marvell and TI Processors.

iWave System has won the confidence of its c

iWave EuropePostbus 61973130 DD VlaardingenThe NetherlandsPh: +31 10 28403383Email: [email protected]

SOM Board to Board

High Speed Conenctor1

(240Pin)

Hard Processor System(Dual ARM® Cortex™- A9)

Arria10 SX/GX

Debug UART

UART (with CTS & RTS)

I2C

GPIOs (Upto 10nos)

USB1

EMAC1

UART0

UART1

I2C1

GPIOs

USB2.0PHY

Ethernet PHY

UTMI

RGMII

SDRAM Controller

(Bank 2J & 2K)

SDMMC

DDR4 (32bit)DDR4 – 1GB(Upgradable)

DDR4 (ECC)

Micro SDConnector

DDR4 ECC (8bit)

SD (4bit)

FPGA AS Header

(Op�onal)

AS Interface

Configura�on Flash

(Op�onal)

High Speed Transceiver (4 Channels)

FPGA

Bank 1D

Bank 1C

Bank 1F

Bank 1E

Ac�ve Serial

High Speed Transceiver (6 Channels)

FPGA IOs (24LVDS/48SE)

FPGA IOs (24LVDS/48SE)Bank 3C

Bank 2A

Bank 3A

Bank 3B

FPGA IOs (46SE)

FPGA IOs (46SE)

High Speed Transceiver (6 Channels)

High Speed Transceiver (6 Channels)

Transceiver PHYTransceiver P

HY

FPG

A IO

sFP

GA

IOs

JTAGJTAG

Note:

• HPS (Hard Processing System) is supported only in Arria10 SoC family (SX) devices.

• All IOs in SOM Board to Board connectors are 1.8V tolerant IOs. Optionally, Bank 2A and Bank 3A supports variable IO level setting(1.8V,1.5V, 1.35V,1.2V).

• Each FPGA IO Bank (2A,3A,3B,3C) which goes to Expansion connectors support two General Purpose Clock Input (1 in 2A) & two General Purpose Clock Output (LVDS/SE).

• Since 3D,3E & 3F banks are available only in some version of Arria10 parts, FPGA DDR4 (64bit) can be supported only in SX480/GX480 or higher.

Power Regulators

Power to Peripherals

DDR4 (64bit) DDR4 RAM(Op�onal)

Bank 3D,3E,3F

NANDNAND -1GB(Op�onal)

NAND

High Speed Transceiver(2 Channels from Bank 1E)

SPISPIM0

SOM

High Speed Conenctor2

(240Pin)

USB OTG

Gigabit Ethernet

FPGA/HPS JTAG Header

FAN Header5V

Power IN (Op�onal)

5V

Board to Board